Telcobriges Tb-640-oc3 Spec Sheet

TELCOBRIDGES’ TB640-OC3/STM-1 SYSTEM-BLADE™ So far ahead… …it’s in a class of its own! The TelcoBridges’ System-Blade™ with its non-blocking architecture allows you to build new, and easily upgrade existing telecommunication applications; to meet today’s requirements for superior performance, flexibility, reliability, scalability and density. The TB640 System-Blade™ allows you to run multiple and different signaling stacks and trunk types on the same blade; it accommodates 2 OC3 or STM-1 interfaces (one active and one standby with APS) on a single blade; plus it retains full capacity to support IVR functions on all channels. All elements, such as signaling variants and interfaces, can be dynamically configured to create a highly available system with unbelievable performance capabilities.

TelcoBridges’ innovative, ultra performing SystemBlade™ is in a class of its own. It allows telecom system integrators to compete effectively by offering a tailor-made solution at an extremely affordable price.

The TB640 System-Blade™ can be easily coupled with: a TB Multi-Blade™ for scalability; another TB640 System-Blade™ for unequalled redundancy and facility protection; and a TB StreamServer™ for nearly unlimited prompts and files play and record capability.

TB640-OC3/STM-1 System-Blade™ SPECIFICATIONS

The TelcoBridges’ system-on-a-blade™ product line has the reliability, flexibility and superior performance to replace any telecom system with a single blade. In addition, the bridging of multiple blades can easily increase a single system capacity up to 16 OC3/STM-1 using our innovative TB MultiBlade™.

Line/Network Interfaces

TelcoBridges’ unique TB640 System-Blade™ offers:

OC3

• • • • • • •

Easy integration Dynamic configuration Non-blocking architecture Proven flexibility High availability Unmatched density Superior scalability

¾ ¾ ¾ ¾

Up to 2 OC3 or STM-1 interfaces (one active and one standby with APS) Interface configuration can be changed live Automatic Protection Switching (APS) between the 2 internal interfaces or between 2 blades MMF or SMF (intermediate or long reach) optical interfaces

STM-1

o

STS-1 framing

o

VC3/AU3 framing

T1 o o o

Up to 84 T1 streams mapped as bit asynchronous VC11/TU11 Up to 84 T1 streams M13 multiplexed into three DS3 Framing: SF, ESF, SLC96

E1 o o o

Up to 63 E1 streams mapped as bit asynchronous VC12/TU12 Up to 63 E1 streams M13 multiplexed into three DS3 following ITU-T G.747 Framing: Double frame, CRC multi frame, Automatic fallback to multi frame

TB640 System-Blade™ OPTIONS Signaling ¾

Signaling type and variant can be changed dynamically on each trunk

SS7 (see TB-SS7 Spec Sheet) ISDN

o

MTP1, MTP2, MTP3, ISUP, SCCP, TCAP

o o

Q.921 LAPD Q.931 ISDN PRI ™ TR41459 (NI-2, Lucent 4ESS and 5ESS, Nortel DMS-100, Nortel DMS250) ™ Euro ISDN ETSI NET5 (French, German, UK, China, Hong-Kong, and Korea) ™ Japanese NTT INSnetl500 ™ Australian TS-014 and TS-038

Control and Management Control o o o

Management o o o o

Message-based APIs over Ethernet Dual redundant rear panel Ethernet (100/1000 Mbps) or PICMG 2.16 in a dual fabric packet switched backplane (100/1000 Mbps) Does not require cPCI CPU server blades Ethernet port or RS-232C Serial port Field upgradeable software and firmware Front panel push buttons for field information on 8-character display Full set of APIs for management

CAS

High availability and redundancy o o o o

Diagnostics o o o

Hot swap (PICMG 2.1 R2.0 Hot Swap Specifications) Hot insertion Supports application redundancy Automatic Protection Switching (APS) between the 2 internal interfaces or between 2 blades POST: Power On Self-Test Local and remote line loopback Log and status available for all modules including full performance monitoring

CAS variants ™ ™ ™ ™ ™ ™

Media Processing ¾ ¾ ¾

Functions are available on all channels DSP mezzanine supports up to 1984 channels DSP software license available on a per channel basis

Voice Processing

Host APIs under Solaris, Linux and Windows

Backplane Interfaces o o o

Mechanical o

o

Compact PCI (PICMG 2.0, Rev 3.0) ECTF H.110 (PICMG 2.5, Rel 2.0), 4096 timeslots fully switchable PICMG 2.16 R1.0 Packet Switching Backplane Specifications (PSB)

Compact PCI boards ™ 6U single slot ™ Front panel (233 x 160mm) ™ Rear panel (233 x 80mm) ™ Keying (PICMG 2.10 Rev 1.0) Connectors ™ 2 SC optical interfaces ™ MMF ™ SMF intermediate reach ™ SMF long reach ™ Dual RJ-45 Ethernet ™ RS232C Serial port ™ APS connector

Power Requirements o o o o

Max 3.3A @ 5v Max 13.1A @ 3.3v <0.1A @ -12v Total board power consumption less than 60W

Environment and Certifications Note: As these specifications are being revised on a regular basis, for up to the minute details, please check:

http://www.telcobridges.com/

o o

G.711 PCM 64kbps, Alaw or µlaw Alaw to µlaw conversion on all channels Play and record on all channels Voice Activity Detection (VAD) and Comfort Noise Generation (CNG) Automatic Gain Control (AGC) Volume Control

o o

Tone detection and suppression Programmable tone generation

o

Up to 132 participants per conference, with unlimited number of listeners

o o o o

Host Operating system o

MFC-R2 Wink Start FXS Ground Start FXS Loop Start FXO Taiwan modified R1

Tone Processing Conferencing

VoIP ¾ ¾ ¾

Optional VoIP mezzanine Up to 2424 channels of G.711 20ms with 128ms echo tail See VoIP Spec Sheet for full specifications

Scalability Multi-Blade™ interconnectivity (for further info, see the TB Multi-Blade™ Spec Sheet) o o o

Multi-Blade™ mezzanine supports up to 2048 channels Connects to the TB Multi-Blade™ to create a non-blocking switch with up to sixteen TB640 family blades Supports dual links on two TB Multi-Blades™ for redundancy

For further information contact: TELCOBRIDGES Inc 115-A1 De Vaudreuil, Boucherville, Quebec, Canada, J4B 1K7 Tel.: +1-450-655-8993 Fax: +1-450-655-9511 www.telcobridges.comridges.com