Technical Document

TO 33D7-35-39-32

SECTION II SPECIAL TOOLS AND TEST EQUIPMENT 2-1. SPECIAL TOOLS AND TEST EQUIPMENT FOR CHANNEL A. Table 2-1 lists special tools and test equipment required to perform the work described for Channel A test station. Equivalent items may be used if the recommended tool/test equipment is not available. 2-2. SPECIAL TOOLS AND TEST EQUIPMENT FOR CHANNEL B. Table 2-2 lists special tools and test

equipment required to perform the work described for Channel B test station. Equivalent items may be used if the recommended tool/test equipment is not available 2-3. DRAWER ALIGNMENT PIN FABRICATION. Four locally manufactured alignment pins are required to perform alignment of drawers in the test station. Fabricate alignment pins per figure 2-1.

2-1

Table 2-1. Special Tools and Test Equipment for Channel A (CONT) Table 2-1. Special Tools and Test Equipment for Channel A Tool/Equipment Number Figure Number Nomenclature Use and Application Tool/Equipment Number Figure Number Nomenclature Use and Application Calibration of RF Interconnect Assembly and Associated Waveguide (CONT) Moving Antenna CabinetsTest of Mounting Fixtures 2142278-( ) Set paragraph 5-564 M6-W-SP-12-16 7001309-9 2144130-2 1992613-( (QTY 2) ) 7001312-1 6458764-3 7001312-2 6458764-4 5157757-2 6458086-1 7001311-1 6458925-1 Clarostat Model 240-C 6458763-1 2144130-( ) 2438176-( ) 2141740-( )

Lifting Dolly Set (4940-01-046-8719) Network Analyzer Case Assembly Calibration of RF Interconnect Assembly and Associated Waveguide Adapter, Waveguide to Coax Test Package, Radar Antenna 01 (red code) Adapter, TNC to 3.5mm Cable Assembly, Radio Frequency 01-01 (red code) Adapter, TNC to 3.5mm Cable Assembly, Radio Frequency 01-02 Adapter, (red code)3.5mm Cable Assembly, RadioModule Frequency 01-03 Electronic Calibration (E-CAL) (red code) Assembly, Difference Power Waveguide Supply Assembly Adjustment 01-04 (red code) Decade Box Waveguide Assembly, Sum 01-05 (red code) Adapter, Waveguide to Coax 01-06 (red code) Servo Command Signal Generator 1A1A3 Adjustment Cable Assembly, Radio Frequency 01-07 (red code)Card Assembly Extender

paragraph 3-9 paragraph 5-565 paragraph 5-565 paragraph 5-564 paragraph 5-565 paragraph 5-564 paragraph 5-565 paragraph 5-564 paragraph 5-565 paragraph paragraph 5-564 5-565 paragraph 5-564 see OA/FI index, paragraph table 5-29,5-564 paragraph 5-434, paragraph 5-564 5-441 paragraph paragraph 5-564 paragraph 5-426

6458926-2

Cable Assembly, Radio Frequency 01-08 OA/FI (red code)Procedures

paragraph 5-564

AN/PSM-6( ) 6458927-1

Multimeter Cable Assembly, Radio Frequency 01-09 (red code)

see OA/FI 5-564 index, paragraph table 5-29

AN/TSM-131 2141740-( )

Electrical Standards Set (ESS) Extender Card Assembly

paragraph see OA/FI 1-4 index, table 5-29

68D040160-( )

Circuit Card Tester Kit

paragraph 5-283

Pomona 4290 (5935-00-321-7969)

SMA(M) to BNC(F) Adapter

see OA/FI index, table 5-29

Tektronix 013-0084-04 (5935-01-499-1838)

BNC (M) to Probe Tip Adapter (for 3.5 mm & 5 mm)

see OA/FI index, table 5-29

Avex Electronics 599-0002

BNC (M) to Probe Tip Adapter (for 7 mm)

see OA/FI index, table 5-29

2-2

Table 2-1. Special Tools and Test Equipment for Channel A (CONT) Tool/Equipment Number

Figure Number

Nomenclature

Use and Application

OA/FI Procedures (CONT) Paskernack PE9269 5935-01-534-4538

BNC(M) to BNC(F) Adapter

see OA/FI index, table 5-29

1993200-1 part of 13A6520

Oscilloscope Probe

see OA/FI index, table 5-29

Agilent 8120-1839 (5995-01-095-6160)

Test Cable BNC(M) to BNC(M) 24 inches

see OA/FI index, table 5-29

6458121-2

Cable Assy, RF W21 (red code)

see OA/FI index, table 5-29

6458122-2

Cable Assy, RF W22 (red code)

see OA/FI index, table 5-29

6458926-2

Cable Assy, RF 01-08 (red code)

see OA/FI index, table 5-29

7001312-2

TNC(M) to 3.5mm(F), Part of Network Analyzer Case Assembly 7001309-9

see OA/FI index, table 5-29

6458763-1

Waveguide Assy, Sum 01-05 (red code)

see OA/FI index, table 5-29

2144130-2

Waveguide to Coax Adapter, Part of Network Analyzer Case Assembly 7001309-9

see OA/FI index, table 5-29

6458764-3

Cable Assy, RF 01-01 (red code)

see OA/FI index, table 5-29

7001312-1

Adapter TNC (F) to 3.5mm (F), Part of Network Analyzer Case Assembly 7001309-9

see OA/FI index, table 5-29

6458086-1

Cable Assy, RF 01-03 (red code)

see OA/FI index, table 5-29

5157757-2

Adapter 3.5mm (M) to 3.5mm (M), Part of Network Analyzer Case Assembly 7001309-9

see OA/FI index, table 5-29

6458925-1

Cable Assy, RF 01-04 (red code)

see OA/FI index, table 5-29

6458764-4

Cable Assy, RF 01-02 (red code)

see OA/FI index, table 5-29

Table 2-1. Special Tools and Test Equipment for Channel A (CONT) Tool/Equipment Number

Figure Number

Nomenclature

Use and Application

OA/FI Procedures (CONT) 2438176-1

Cable Assy, RF 01-07 (red code)

see OA/FI index, table 5-29

6458927-1

Cable Assy, RF 01-09 (red code)

see OA/FI index, table 5-29

5157757-1

Adapter 3.5mm (F) to 3.5mm (F), Part of Network Analyzer Case Assembly 7001309-9

see OA/FI index, table 5-29

5157757-3

Adapter 3.5mm (M) to 3.5mm (F), Part of Case Storage Assembly 5207457-9

see OA/FI index, table 5-29

Drawer Alignment Locally manufactured (see figure 2-1)

Alignment pin

Drawer alignment paragraph 5-501

Table 2-2. Special Tools and Test Equipment for Channel B Tool/Equipment Number

Figure Number

Nomenclature

Use and Application

Moving Cabinets or Mounting Fixtures M6-W-SP-12-16

Lifting Dolly Set (4940-01-046-8719)

paragraph 3-9

Transmitter Mounting Fixture Relief Valve Adjustment King Nutronics Model 3461

Portable Pressure Calibration/Test System (Part of the ESS)

paragraph 5-385

10-10

Pressure Gage Tester

paragraph 5-386

AN 910-2J

Coupling

paragraph 5-386

AN 919-10

Adapter

paragraph 5-385

AN 816-7J

Adapter

paragraph 5-386

AN 894-6-4

Adapter, 3/8 inch-18 AMPT female to 1/4 inch male flair fitting

paragraph 5-385

Adapter, 1/4 inch-18 AMPT female to 1/4 inch male flair fitting

paragraph 5-389

Bench Stock

7M156-4-4

2-4

Table 2-2. Special Tools and Test Equipment for Channel B (CONT) Tool/Equipment Number

Figure Number

Nomenclature

Use and Application

Transmitter Mounting Fixture Cradle/Stanchion Repair 4934 (Mite Corp, Heli-Coil Products Division, MFR Code 01556)

NA

Thread Repair Kit

paragraph 5-509

Calibration of Transmitter Mounting Fixture RF Assembly and Associated Waveguide Plumbing 1992614-( )

Test Package, Radar Transmitter 02 (red code)

paragraph 5-570

2132870-( )

5-163

Elbow, Horizontal Plane Waveguide 0220 (red code)

paragraph 5-570

2142337-( )

5-162, 5-170

Adapter Assembly, Interlock 02-12 (red code)

paragraph 5-570

2438275-( )

5-167

Cable Assembly, Radio Frequency 0214 (red code)

paragraph 5-570

2439777-( )

5-173

Cable Assembly, Radio Frequency 0215 (red code)

paragraph 5-570

2132679-( )

5-163

Waveguide Assembly 02-09 (red code)

paragraph 5-570

UG446A/U

5-173

Waveguide Adapter 02-17 (red code)

paragraph 5-570

Electrical Standards Set (ESS) Hewlett Packard A2N01N01060.0

5-156 thru 5-158, 5-160 thru 5-163 5-166 thur 5-168 5-170 thru 5-173

RF Cable, N termination, 5 ft (2 ea.)

paragraph 3-13, 5-571

Model X281A

5-167, 5-170, 5-172

Waveguide to Coaxial Adapter (4 ea.)

paragraph 5-571

Model X261A

5-160, 5-172

Waveguide to Coaxial Adapter (2 ea.)

paragraph 5-571

Table 2-2. Special Tools and Test Equipment for Channel B (CONT) Tool/Equipment Number

Figure Number

Nomenclature

Use and Application

Electrical Standards Set (ESS) (CONT) Model 8491B-20

5-175

20dB Coaxial Attenuator (2 ea.)

paragraph 5-596

Model 8491B-10

5-156 thru 5-158, 5-160 thru 5-163 5-167, 5-168 5-170 thru 5-175

10dB Coaxial Attenuator (2 ea.)

paragraph 5-596

Model 8673D

5-157, 5-158, 5-160 thru 5-163 5-167, 5-168 5-170 thru 5-175

Synthesized Signal Generator

paragraph 5-571

HP 5340A

5-174

Frequency Counter

paragraph 5-596

HP 436A

5-175, 5-181

Power Meter

paragraph 5-596

HP 8481H

5-175

Power Sensor

paragraph 5-596

HP3048A-E41

5-179

AM Noise Filter

paragraph 5-596

HP 71210A-E09 (HP 71000T-E09)

5-176, 5-178

Spectrum Analyzer

paragraph 5-596

HP 8780A-K21

5-180

Low Noise Test System (LNTS)

paragraph 5-596

HP 8663A (P/O 3048A-E41)

5-178, 5-180

Synthesized Signal Generator

paragraph 5-596

HP 909 Opt 12

5-162, 5-172, 5-174, 5-175

Termination 50Ω

paragraph 5-596

HP 8491B-6

as required

Attenuator 6dB

paragraph 5-596

Type N(m)-Type N(m) Cable (2 required)

paragraph 5-596

AM Noise Filter

paragraphs 5-596, 5-600

Pomona 1658-T-36

HP 3048A-K21 (P/O LNTS)

5-178

Table 2-2. Special Tools and Test Equipment for Channel B (CONT) Tool/Equipment Number

Figure Number

Nomenclature

Use and Application

Electrical Standards Set (ESS) (CONT) Pomona 2249- C-36

BNC Cables (6 required)

paragraph 5-596

HP 8470B

Crystal Detector

paragraph 5-596

HP 70427A-K02 (P/O LNTS)

Balun Assembly

paragraph 5-596

DORIC DS-350

Electronic Thermometer

paragraph 5-409

Systron Donner Model 5000A

5-166

Sweep Generator

paragraph 5-571

Model 5015

5-166

Module 8 - 12GHz

paragraph 5-571

Bench Stock Microdot 053-0248

5-182

TNC female to N female adapter

paragraph 5-571

UG29B/U

5-157, 5-158, 5-160 thru 5-163 5-166 thru 5-168 5-170 thru 5-173

N to N female adapter (part of ESS)

paragraph 5-571

5-166 thru 5-168 5-170 thru 5-173

RF Cable, BNC termination, 5 feet

paragraph 5-571

5-165

RF Cable, N termination, 3 feet (2 ea.)

paragraph 5-571

Recharging Refrigeration System A1catel ZM2007 1010

N/A

Vacuum Pump (part of ESS)

paragraph 5-331

Pressure Gage Tester

paragraphs 5-415 thru 5-418

OA/FI Procedures 10-10

Pressure Gage Tester

see OA/FI index, table 5-55

AN/PSM-6( )

Multimeter

see OA/FI index, tables 5-29, 5-55

AN910-2J

Adapter

see OA/FI index, table 5-55

Table 2-2. Special Tools and Test Equipment for Channel B (CONT) Tool/Equipment Number

Figure Number

Nomenclature

Use and Application

OA/FI Procedures (CONT) AN819-7J

Adapter

see OA/FI index, table 5-55

Adapter (modified)

see OA/FI index, table 5-55

2132870-( )

H-plane waveguide elbow 02-20 (red code)

see OA/FI index, table 5-55

UG446A/U

Waveguide Adapter 02-17 (red code)

see OA/FI index, table 5-55

2142057-( )

Cable Assembly 02-01 (red code)

see OA/FI index, table 5-55

2141856-( )

Cable Assembly 02-03 (red code)

see OA/FI index, table 5-55

6410058-( )

Adapter Test, Interface Assembly 02-36 (red code)

See OA/FI index, table 5-55

2439777-( )

Radio Frequency Cable Assembly 02-15 (red code)

see OA/FI index, table 5-55

2440274-( )

Special Purpose Hose Assembly 02-23 (red code)

see OA/FI index, table 5-55

72 PSI Restrictor

see OA/FI index, table 5-55

Clarostat Model 240-C

Decade Box

See OA/FI index, table 5-29

68D040160-( )

Circuit Card Tester Kit

paragraph 5-283

5157758-1 or Tektronix 013-0084-04

BNC(M) to Probe Tip Adapter (for 3.5mm & 5mm)

see OA/FI index, table 5-29

5157758-2 or Avex Electronics 599-0002

BNC(M) to Probe Tip Adapter (for 7mm)

see OA/FI index, table 5-29

5155412-1 or Pasternack PE9269

BNC(M) to BNC(F) Adapter

see OA/FI index, table 5-29

AN894-12-8

Locally manufactured (Checkout Procedure paragraph 5-366)

2-3

2-2

Table 2-2. Special Tools and Test Equipment for Channel B (CONT) Tool/Equipment Number

Figure Number

Nomenclature

Use and Application

OA/FI Procedures (CONT) 1993200-1

Oscilloscope Probe part of 13A6520

table 5-58

5157759-1 or Agilent 8120-1839

Test Cable BNC(M) to BNC(M) 24 inches

table 5-58

Drawer Alignment Locally manufactured (see figure 2-1)

Alignment pin

Drawer alignment paragraph 5-501

TO 33D7-35-39-32

LEGEND 1.

DIMENSIONS ARE IN INCHES.

2.

MATERIAL: STEEL CRE BAR STOCK A-286 (AMS 5735)

3.

FINISH:

PASSATIVE, MIL-STD-171

Figure 2-1. Drawer Alignment Pin Fabrication

2-9

TO 33D7-35-39-32

LEGEND 1.

DIMENSIONS ARE IN INCHES.

2.

MATERIAL: ALUMINUM TUBING 3/8”.

3.

NORMAL RESTRICTIONS 72±5PSI.

Figure 2-2. 72 PSI Restrictor Fabrication

2-10

TO 33D7-35-39-32

Figure 2-3. AN894-12-8 Adapter Modification

2-11