Technical Data Sheet.docx

Technical Data Sheet Wooden Frame 1

2 3 4 5

Brand name Size

Space wood

Thickness General Flatness

Twist,cupping,wrapping,not to be exceed 6mm

Frame 1)Approved used material frame:



Depth of deviation at any point to be less than .5mm LVL Beech Wood



Material Finish of member



Priming paint

all on open side-Less than 5 mm



Squareness and right angle

as per drawing



Defect as per sample



Tolerence limit

Not any damages,proper sheet fixing,Cracks etc as per drawing

2)a)Olifin Wrapping

Olifin wrap

PVC Foil

b)Proper use of glue

Japanese Glue 5250

c)Corner joint

As per drawing

3)Approved fitting at required position

Slotting as per drawing

4)Moisture content

8% to 12%

5)Architrave:1)Approved used material A)Material

5.5mm HMR MDF

B)Finish of members

olifin wrap

C)Squareness &Right angle

As per Drawing

D)Defect free as per sample

Not any damages,Proper top sheet fixing,cracks etc.

2) A)Grooving&Moulding

As per drawing

B) Proper use of Glue

Technomelt 134

C)Corner Joints

As per drawing

Technical Data Sheet Wooden Door 1 2 3 4 5

Brand Name Size:Thickness Edges Squareness

6 7

General Flatness Frame:1) Approved Used material Frame Type & size Door

Space Wood

Should be sharp,straight&no damages in top layer Deviathion not more than 01mm on a length of 500mm Twist,cupping,wrapping,not to be exceed 6mm.

Main door with stiles & rails of LVB, Tubular particle board& laminated on both side. Bed room with stiles & rails of LVB, Tubular particle board& Prelam HDF/ Laminated on both side. Toilet with stiles & rails of LVB, tubular particle board & prelam HDF/ laminated on both side.

Edges band:-

PVC edge band 1.5 mm thick matching all side.

Edges Band Gule:-

TECHNOMELT PUR 270/7 G.

Squareness & Right angles:-

Max. 1 mm/ 500 mm As per IS:2202-1.

Defect free as per sample:Tolerance limit

Not any damagesProper top sheet fixing,Cracks etc.

Approved fitting at required position:4)a)Surface Protection

Slotting as per drawing

b)Defect Free

As per IS:2202-1.

Protective film on surface.

Protective film on surface.