Technical Data March 2009
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Technical Data March 2009 as PDF for free.
More details
- Words: 340
- Pages: 1
AUREUS Technical Data
March 2009
Aureus The Aureus machine is designed to support Rapid Prototyping and Direct Manufacturing with a low cost, high resolution solution. Based on the principle of Photopolymerisation the Aureus System creates three dimensional wax and resin Machine Properties*
Aureus
Build Envelope**
60 x 45 x 100 mm
Voxel*** size XY
43 µm
Dynamic Voxel Thickness Z****
25-35 µm
Resolution SXGA+ *
1400 x 1050 px
System specification are subject to change without notice. Pre-adjusted by each material module.
**
Deviation of ± 2mm possible.
A Voxel is a Volumetric Pixel.
***
****
System Data Handling Utilizing a built in Ethernet® interface the Aureus machine can easily connect directly to a PC workstation or be integrated into a network. The Aureus has an embedded PC, which allows the system to work independently from the pre-processing workstation. The machine can be remotely monitored from any computer on the network using the communication software from the Aureus Software Suite. Any STL data format can be easily imported using the Aureus Software Suite.
System Properties • Easy handling through pre-adjusted material modules. • Build speed is constant through the build up to 3-7 mm per hour at 35 μm Z-Voxel thickness. (Material dependent) • Very few moving parts and minimal consumable components guarantee a strong and reliable system. • Minimized components make the system user serviceable. • Post-processing is clean and simple due to near 100 % photo cure during the building process. • Models are suitable for direct manufacturing through Rapid Casting. • A choice of materials are available, from concept models to functional parts, such as envisionTEC Nanocure resin for producing high detailed rubber and silicon molds, and envisionTEC PIC 300 and WIC100G for Direct Investment Casting. • Fully cured models are chemically safe. • Low acquisition cost.
envisionTEC GmbH Brüsseler Straße 51 ● 45968 Gladbeck ● Germany
Phone +49 2043 98 75-0 ● Fax +49 2043 98 75-99
USA Distributor
1100 Hilton Road ● Ferndale, MI 48220 ● USA Phone +1-248-582-0038 ● Fax +1-248-582-0039
www.envisiontec.com [email protected]
Aureus
March 2009
Aureus The Aureus machine is designed to support Rapid Prototyping and Direct Manufacturing with a low cost, high resolution solution. Based on the principle of Photopolymerisation the Aureus System creates three dimensional wax and resin Machine Properties*
Aureus
Build Envelope**
60 x 45 x 100 mm
Voxel*** size XY
43 µm
Dynamic Voxel Thickness Z****
25-35 µm
Resolution SXGA+ *
1400 x 1050 px
System specification are subject to change without notice. Pre-adjusted by each material module.
**
Deviation of ± 2mm possible.
A Voxel is a Volumetric Pixel.
***
****
System Data Handling Utilizing a built in Ethernet® interface the Aureus machine can easily connect directly to a PC workstation or be integrated into a network. The Aureus has an embedded PC, which allows the system to work independently from the pre-processing workstation. The machine can be remotely monitored from any computer on the network using the communication software from the Aureus Software Suite. Any STL data format can be easily imported using the Aureus Software Suite.
System Properties • Easy handling through pre-adjusted material modules. • Build speed is constant through the build up to 3-7 mm per hour at 35 μm Z-Voxel thickness. (Material dependent) • Very few moving parts and minimal consumable components guarantee a strong and reliable system. • Minimized components make the system user serviceable. • Post-processing is clean and simple due to near 100 % photo cure during the building process. • Models are suitable for direct manufacturing through Rapid Casting. • A choice of materials are available, from concept models to functional parts, such as envisionTEC Nanocure resin for producing high detailed rubber and silicon molds, and envisionTEC PIC 300 and WIC100G for Direct Investment Casting. • Fully cured models are chemically safe. • Low acquisition cost.
envisionTEC GmbH Brüsseler Straße 51 ● 45968 Gladbeck ● Germany
Phone +49 2043 98 75-0 ● Fax +49 2043 98 75-99
USA Distributor
1100 Hilton Road ● Ferndale, MI 48220 ● USA Phone +1-248-582-0038 ● Fax +1-248-582-0039
www.envisiontec.com [email protected]
Aureus
Related Documents
Technical Data March 2009
June 2020 3
Technical Bulletin March
October 2019 11
Rm 2000 Technical Data
May 2020 9
Technical Data For Silver
June 2020 6
Ppc Series Technical Data
April 2020 10