Syllabi Eim 10.docx

SARIAYA INSTITUTE, INC. SARIAYA, QUEZON S.Y 2018-2019 3rd QUARTER SYLLABUS IN TECHNOLOGY AND LIVELIHOOD EDUCATION- GRADE 10 Course Description: This course provides the students with understanding and has skills in the field of Industrial Arts activities and challenges the young ones to be competitive globally. It aims also to guide teenagers and to provide activities that will help solve personal problems, develop independence, security and confidence and be an ideal individual. General Objectives: The objective of this lesson is to give opportunities to the students to explore different concepts of specialization of Technology and Livelihood Education. These lessons explore career, utilize technology, and develop skills and values to prepare them to be globally competitive. WEEK Week 1

Objectives 



 



Interpret plan/ drawings for the selection of wiring devices based on the job requirement. Identify the correct quantity of wiring materials and devices to be used based on job requirement. Select tools and equipment to be used based on job requirement Select appropriate Personal Protective Equipment

Topic -Application of tools materials and equipment in accordance to Philippine Electrical Code - Basic Methods and requirements for the installation

Interpret plan/ drawings -Application of for the selection of wiring tools materials and equipment in

Procedure/ Strategies

Value Integration

Evaluation

Reference/s

Course Requirements

-Pre-Assessment -Discussion -Activities

- Sensitivity -aiming for excellence -Cooperative Organized -Eagerness -Enthusiasm -OpenMindedness -Responsibility -Respectful -Patience

Activity

K to 12 Basic Education Curriculum; Technology and Livelihood Education; Electrical Installation and Maintenance

-Activity

-Discussion -Activity

- Sensitivity -aiming for excellence

Activity

K to 12 Basic Education Curriculum; Technology and

-Practical Activity

Week 2



 

Week 3





 



Week 4



devices based on the job requirement. Identify the correct quantity of wiring materials and devices to be used based on job requirement. Select tools and equipment to be used based on job requirement Select appropriate Personal Protective Equipment

accordance to Philippine Electrical Code - Basic Methods and requirements for the installation

Interpret plan/ drawings for the selection of wiring devices based on the job requirement. Identify the correct quantity of wiring materials and devices to be used based on job requirement. Select tools and equipment to be used based on job requirement Select appropriate Personal Protective Equipment

-Application of tools materials and equipment in accordance to Philippine Electrical Code - Basic Methods and requirements for the installation

Interpret plan/ drawings for the selection of wiring devices based on the job requirement. Identify the correct quantity of wiring materials and devices to be used based on job requirement.

-Application of tools materials and equipment in accordance to Philippine Electrical Code - Basic Methods and requirements for the installation

Livelihood Education; Electrical Installation and Maintenance

-Cooperative Organized -Eagerness -Enthusiasm -OpenMindedness -Responsibility

-Activities

- Sensitivity -aiming for excellence -Cooperative Organized -Eagerness -Enthusiasm -OpenMindedness -Responsibility

-Activities

K to 12 Basic Education Curriculum; Technology and Livelihood Education; Electrical Installation and Maintenance

-Activities

-Activity

- Sensitivity -aiming for excellence -Cooperative Organized -Eagerness -Enthusiasm -OpenMindedness -Responsibility

-Activities

K to 12 Basic Education Curriculum; Technology and Livelihood Education; Electrical Installation and Maintenance

-Activities

 

Select tools and equipment to be used based on job requirement Select appropriate Personal Protective Equipment

Week 5

3rd 

Week 6



 

Install Electical wiring systems using different types of wiring systems using different types of wiring method o Circuit with one bulb controlled by surface or flush type single poles switch o Circuit using 3way switches in 2 locations o Circuit using 3way and 4-way switches in 3 locations Install the wiring devices for floor and ground fault current interrupter in accordance with OHS procedures. Combination of lighting and convenience outlets Observe safety procedure in installing the wiring devices for floor and ground fault current interrupter in accordance with OHS procedure.

S E M I -

Q U A R T E R L Y

E X A M I N A T I O N

Picture Analysis -Discussion -Practical Activities

-Practical Activities

-Specifications of electrical materials and supplies -Install Electrical Systems, Auxiliary Outlets and Lighting Fixtures *Electrical tools, equipment and materials for specific job order *Different types of wiring Methods Approved in Philippine condition *Basic Electrical Wiring Installation

- Sensitivity -aiming for excellence -Cooperative Organized -Eagerness -Enthusiasm -OpenMindedness -Responsible -Respectful

K to 12 Basic Education Curriculum; Technology and Livelihood Education; Electrical Installation and Maintenance

-Activities

Week 7





 

Week 8

 

Install Electical wiring systems using different types of wiring systems using different types of wiring method o Circuit with one bulb controlled by surface or flush type single poles switch o Circuit using 3way switches in 2 locations o Circuit using 3way and 4-way switches in 3 locations Install the wiring devices for floor and ground fault current interrupter in accordance with OHS procedures. Combination of lighting and convenience outlets Observe safety procedure in installing the wiring devices for floor and ground fault current interrupter in accordance with OHS procedure.

Specifications of electrical materials and supplies -Install Electrical Systems, Auxiliary Outlets and Lighting Fixtures *Electrical tools, equipment and materials for specific job order *Different types of wiring Methods Approved in Philippine condition *Basic Electrical Wiring Installation

-Activities

- Sensitivity -aiming for excellence -Cooperative Organized -Eagerness -Enthusiasm -OpenMindedness -Responsibility

-Activities

K to 12 Basic Education Curriculum; Technology and Livelihood Education; Electrical Installation and Maintenance

-Activities

Install Electical wiring systems using different types of wiring systems using different types of wiring method o Circuit with one bulb controlled by

Specifications of electrical materials and supplies -Install Electrical Systems, Auxiliary Outlets and Lighting Fixtures *Electrical tools, equipment and materials

-Activities

- Sensitivity -aiming for excellence -Cooperative Organized -Eagerness -Enthusiasm

-Activities

K to 12 Basic Education Curriculum; Technology and Livelihood Education; Electrical Installation and Maintenance

-Activities



 



surface or flush type single poles switch o Circuit using 3way switches in 2 locations o Circuit using 3way and 4-way switches in 3 locations Install the wiring devices for floor and ground fault current interrupter in accordance with OHS procedures. Combination of lighting and convenience outlets Observe safety procedure in installing the wiring devices for floor and ground fault current interrupter in accordance with OHS procedure.

for specific job order *Different types of wiring Methods Approved in Philippine condition *Basic Electrical Wiring Installation

Week 9 Week 10

-OpenMindedness -Responsibility

Formative Quiz Preparation for Performance Task Reflective Journal 3rd Q U A R T E R L Y

E X A M I N A T I O N/ P E R

F

O

R M

A

N

C

E

T A

Prepared by: Ms. Mary Grace A. de las Alas (T.L.E.10 Teacher)

S

K