Student Project Inv 2008
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Student Project Inv 2008 as PDF for free.
More details
- Words: 670
- Pages: 16
Student Projects Student Project 1 Create different components of the Shaper’s Tool Head Slide assembly and then assemble them as shown in Figure 1. Figure 2 shows the exploded view of the assembly. The dimensions of various components are given in Figure 2 to Figure 6.
Figure 1 Shaper’s Tool Head Slide assembly
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com 2 Autodesk Inventor for Designers
Figure 2 Views and dimensions of the Back Plate
Figure 3 Views and dimensions of the Vertical Slide
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Student Projects 3
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com 4 Autodesk Inventor for Designers
Figure 4 Views and dimensions of the Swivel Plate
Figure 5 Views and dimensions of the components
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Student Projects 5
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com 6 Autodesk Inventor for Designers
Figure 6 Views and dimensions of the components
Student Projects
7
Student Project 2
Figure 7 The Stock Bracket assembly
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Create the Stock Bracket assembly shown in Figure 7. The dimensions of the components of the assembly are shown in Figures 8 through 14.
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com 8 Autodesk Inventor for Designers
Figure 8 Top and front views of the Stock Support Base
9
Figure 9 Front and right-side views of the Stock Support Roller
Figure 10 Top and front views of the Adjusting Screw Nut
Figure 11 Front and right-side views of the Support Roller Bracket
Figure 12 Views of the Adjusting Nut Handle and Adjusting Screw Guide
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Student Projects
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
10
Figure 13 Views of the Support Adjusting Screw
Autodesk Inventor for Designers
Figure 14 Top and front views of the Thrust Bearing
Student Projects
11
Create the components of the Bracket Support assembly and then assemble them, as shown in Figure 15. The exploded view of the assembly is shown in Figure 16. The dimensions of the components are given in Figures 17 through 21.
Figure 15 The Pulley Support assembly
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Student Project 3
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
12
Autodesk Inventor for Designers
Figure 16 Exploded view of the Pulley Support assembly
Figure 17 Parts list for the Pulley Support assembly
13
Figure 18 Dimensions of the Pulley
Figure 19 Dimensions of the Bushing
Figure 20a Left-side view of the Bracket
Figure 20b Sectioned front view of the Bracket
Figure 21 Dimensions of the Washer, Cap Screw, Turn Screw, and Nut
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Student Projects
14
Autodesk Inventor for Designers
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Student Project 4 Create the components of the Fixture assembly shown in Figure 22. The exploded view of the assembly is shown in Figure 23. The details of the components of the Fixture assembly are shown in Figures 24 through 27.
Figure 22 The Fixture assembly
Figure 23 Exploded view of the assembly displaying various components
Figure 24 Dimensions of the End Plate
Figure 25 Dimensions of the Disk
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Student Projects 15
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
16
Autodesk Inventor for Designers
Figure 26 Dimensions of the Support Pin and the Bolt
Figure 27 Dimensions of the Spacer, Center Pin, and the Nut
Figure 1 Shaper’s Tool Head Slide assembly
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com 2 Autodesk Inventor for Designers
Figure 2 Views and dimensions of the Back Plate
Figure 3 Views and dimensions of the Vertical Slide
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Student Projects 3
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com 4 Autodesk Inventor for Designers
Figure 4 Views and dimensions of the Swivel Plate
Figure 5 Views and dimensions of the components
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Student Projects 5
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com 6 Autodesk Inventor for Designers
Figure 6 Views and dimensions of the components
Student Projects
7
Student Project 2
Figure 7 The Stock Bracket assembly
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Create the Stock Bracket assembly shown in Figure 7. The dimensions of the components of the assembly are shown in Figures 8 through 14.
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com 8 Autodesk Inventor for Designers
Figure 8 Top and front views of the Stock Support Base
9
Figure 9 Front and right-side views of the Stock Support Roller
Figure 10 Top and front views of the Adjusting Screw Nut
Figure 11 Front and right-side views of the Support Roller Bracket
Figure 12 Views of the Adjusting Nut Handle and Adjusting Screw Guide
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Student Projects
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
10
Figure 13 Views of the Support Adjusting Screw
Autodesk Inventor for Designers
Figure 14 Top and front views of the Thrust Bearing
Student Projects
11
Create the components of the Bracket Support assembly and then assemble them, as shown in Figure 15. The exploded view of the assembly is shown in Figure 16. The dimensions of the components are given in Figures 17 through 21.
Figure 15 The Pulley Support assembly
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Student Project 3
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
12
Autodesk Inventor for Designers
Figure 16 Exploded view of the Pulley Support assembly
Figure 17 Parts list for the Pulley Support assembly
13
Figure 18 Dimensions of the Pulley
Figure 19 Dimensions of the Bushing
Figure 20a Left-side view of the Bracket
Figure 20b Sectioned front view of the Bracket
Figure 21 Dimensions of the Washer, Cap Screw, Turn Screw, and Nut
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Student Projects
14
Autodesk Inventor for Designers
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Student Project 4 Create the components of the Fixture assembly shown in Figure 22. The exploded view of the assembly is shown in Figure 23. The details of the components of the Fixture assembly are shown in Figures 24 through 27.
Figure 22 The Fixture assembly
Figure 23 Exploded view of the assembly displaying various components
Figure 24 Dimensions of the End Plate
Figure 25 Dimensions of the Disk
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
Student Projects 15
Copy.. Do not reproduce. F For www.cadcim.com Evaluation Copy or information visit www .cadcim.com
16
Autodesk Inventor for Designers
Figure 26 Dimensions of the Support Pin and the Bolt
Figure 27 Dimensions of the Spacer, Center Pin, and the Nut
Related Documents
Student Project Inv 2008
October 2019 9
Student Project
June 2020 7
Inv
July 2020 25
Inv
June 2020 18
Reunion-2008-inv
November 2019 1