Student Mod 9

IT Essential – Module 9 (Advanced Hardware Fundamentals for Servers) 1. Which two technologies are commonly used to support external disk systems? 2. To boot from a SCSI disk drive, what must be the SCSI ID of the drive? 3. Which category of service tools enables a network manager to diagnose problems on a network server without having to boot the network operating system? 4. Which RAID level uses block-level parity, but spreads the parity information among all the disk drives in the disk array? 5. Which RAID level requires a minimum of four disk drives to implement? 6. Where must a SCSI chain be terminated? 7. After adding a second processor to a Windows NT server, the PC technician discovers that the operating system is only using the original processor. What must the technician do to get the second processor running? 8. Using an external CD-ROM system, what is the maximum number of CD-ROM drives that can share a single SCSI ID? 9. State the seven steps for adding additional processors: 10. On a Windows NT and Windows 2000 server the _____________ has to be updated before multiple processors are added. 11. What is hardware based RAID? 12. What is software based RAID?