Specification- Lab. Equip

No 1.

Item Hot plate with magnetic stirrer

Total 3

Specification Maximum speed (rpm) = 2800 Maximum temperature = 320OC. Diameter of hot plate = 133 mm. Overall size = Portable. Volume stirred (max.)= 4liter. Power input = 220-240V, 50/60Hz, Single phase.

3

Mortars -Diameter = 200mm, Capacity (volume) = 2000ml Pestles Head diameter = 55mm- Length = 210mm Mortars - Diameter = 150mm, capacity (volume) = 700ml Pestles Head diameter = 42mm- Length = 175mm -Flow rate: 16-19m3/hr. -Ultimate pressure 2 x 10-3 mbar. -Dimension = Medium, Portable -Power supply: 220-240V, 50/60Hz, single phase supplies. -Range = 1-14pH, -Resolution = 0.01pH. - Accuracy = ±0.02 -Speed range: 40-4000rpm, overhead. -Capacity: With 1liter cup. -Polished stainless steel. -Spiral mixer and detachable beaker. -Automatic start up and stop. -Power: 220-240V, 50/60Hz, Single phase.

2

3

Mortars and pestles 2.1. Mortars & Pestles (200mm diam.) 2.2. Mortars& Pestles (150mm diam.) Vacuum pump (Compressor)

4

pH meter (Bench)

1

5

Mixer or High Speed Stirrer (for soil texture determination)

1

6

Spectrophotometer (with accessories & spare parts)

1

Double Beam UV/VIS Spectrophotometer Microcontroller Based Instrument having range 190 to 1100 nm with 24x2 line LCD display, Two quartz cuvettes, 18 touch keys, base lines correction, source optimization & electronic calibration etc. It has facility for measurement of % T, Abs. Conc,, K-Factor and multi component analysis. The operating modes are single/multi wavelength, wavelength scan, time scan etc.

150000

7

Conductivity meter (Bench)

2

3300

8

Water distiller

1

Analytical balance (analytical) (0.01gm)

2

Analytical balance (0.001gm)

2

11 12

Orbital shaker with spares Centrifuge with accessories & spares (High speed)

1 2

13

Soil hydrometer

3

-Measuring range: 0-199.9mS. -Resolution: 0.01mS -Temperature: 0 to 50oC. Accuracy: ±0.5 % ± 2digits. -Power: 230V, 50/60Hz, single phase. -Out put: 8ltr, single distilled. -Quality of distillate: → pH=5-6.5, EC= <2.5μS/cm, Temperature = +25 -35oC. - Power supply: 220-240V, 50/60Hz, Single phase. -Capacity = 600gm. -Readability = 0.01gm. -Calibration mass = 100gm, Stabilization time =2 seconds. -Power = AC adapter 220-240V, 50/60Hz, Single phase. -Weighing range = 0 to 300gm. -Readability = 0.001gm -Stabilization time = 3seconds. -Weighing pan = Stainless steel, Diameter = 85 to 130mm. -Size =Highly portable. -Calibration =Automatic adjustment. -Power supply =220V, 50Hz, Single phase. -Plate form (W x D) = 330x330mm, Orbit = 10mm -Max. speed = 13500 rpm. -Speed control = Adjustable and automatic. Capacity = 4 x 100ml. - Power: 240V, 50/60Hz, Single phase. Measuring range = 0.995 to 1.030g/ml.

3 2

9 10

Price……. 1800

95 45 5500

3300 2200

9800

5000

19900

2600

60

14

Semi-micro kjeldhal (automatic) digestion block

1

15

Semi-micro kjeldhal (automatic) distillation unit

1

16

Set of standard weights for calibration of analytical balances

3

Mercury Thermometer(-10 to 110 oC) Oven (250oC)

10

17 18

4

Acetylene cylinder with gas 19

2

20

Air conditioner

1

21

Light trap

15

22

Grinder of laboratory mill

1

23

Auto mix laboratory blender

1

24 25

Refrigerator Advanced insect dissecting kit

1 3

-Subdivision = 0.001gm/ml. -Temperature =Adjusted for use at 20oC. -Length = 345mm -Power consumption = 3000W. No. of digestion positions = 20 -Power supply = 220-240V, 50Hz, single phase. -Temperature range= maximum 420oC, with excess temp. protection. -Power consumption: 1500W, watr pressure = 3bar, water consumption = 3lt/distillation minutes. -Power supply: 220-240V, 50Hz, single phase, set of 6 units. -Distillation time: 2 to 3 minutes per sample. -Weight set = 9 piece weigt sets ASTM shape, 1-100gm. Weights included =1gm, 2x2gm, 5gm, 10gm, 2x 20gm, 50gm and 100gm. Temperature range = -10 to 110oC. Capacity = 400lt -Temperature range = 0-250oC. Temperature fluctuation = ±0.75oC -Power: 220-240V, 50/60Hz, single phase, with control & safety thermostats. Capacity = 40lt, outside diameter = 250mm, weight = 40kg - Working pressure = 3MPa , hydraulic test pressure = 5.2MPa. Cooling capacity (BUT/Hr) = 12000. -Energy efficiency = 10.1, filter type = Renewable. -AC type = Slite system, capacity: 80m2 area to be covered. -Power supply = 230-240V, 50/60Hz, single phase. RI-72-01 Insect Light Trip With Electric Bulb Made of mild steel with a box at the bottom for placing killing bottle/tray Length of funnel 30 cm, diameter of funnel at the tail end 5 cm, size of box 40 x 40x 25 cm Funnel coming into box for convenient collection of trapped insects into the tray. Provided with a shade to cover the whole equipment. Supports for stout construction and 5 meter long electric cord. Polished cast iron/steel chamber with two stationary blades and rotor with four cutting edges. Supplied complete with three sieves of 20, 40, 60 or 80 meshes. Chamber size: 100 mm x 50 mm with ½ HP Motor Containers are of stainless steel having capacity of 1 liter to permit blending of up to 800 c.c. Fitted with powerful universal AC/DC motor with choice of HIGH, 430 Liter capacity Includes: Dissecting Pan, Aluminum, with tie clips, without wax (131/8 x 9-3/8 x 2-1/4) Leatherette Case, 12 Loops Forceps, Stainless Steel, 4-1/2" with pin Metal Needle Holders with Chuck, Straight Needle, Bent Needle Teasing Needle - Straight with wood handle Ruler, 12" Clear Plastic Cartilage Knife, Stainless Steel, 1-1/2" blade Scalpels, Stainless Steel, 1-1/2" Blade Replacement Blade #11

26000

3600

140 25 15500

17500

1500

180

Insect Breeding Cage 26

10

27

Vortex Mixer

1

28

Incubator

1

29

Polarimeter with accessories (Accessories include refractometer, refrigerated circulator, PC notebook, Printer, scanner and copier- three in one)

1

Specification for accessories of Polari meter 29.1. Pol tube (Stainless steel flow) 29.2. Pol tube Glass 29.3. Pol tube Glass 29.4. Refrigerated circulator 29.5. Refractometer

29.6.PC (note book)

Scissors, Sharp/Blunt, Stainless Steel, 5-1/2" Hand lens Insect breeding cage consisting of a base and lid of high impact polystyrene and a heat resisting cylinder which allow the cage to be sterilized. Dimension 300mm diameter by 470mm Foam pad mixing surface 3000 operating speed (RPM) 230 volt 0.3 electrical amp 50/60 hertz Programmable cooled incubator External Dimesions: 700(W) X 580(D) X 1018(H) mm Internal dimesions: 620(W) X 386(D) X 555(H) mm Effective capacity: 126 l Exterior: Backed on acrylic finish on galvanized steel Interior: stainless steel (SUS 304) Door: Backed on acrylic finish on galvanized steel Observation window with black panel to screen from light Control range: -10oC - +500C Measuring mode -°Z(°ISS), °S or user defined scale Measuring range ±225°Z Resolution 0.01°Z Reproducibility 0.02°Z Accuracy 0.01°Z up to 5°Z and 0.02 above 5°Z Optical wavelengths 589nm and 880nm dual Response time 2.88°Z/sec, slewing rate & 2sec, nominal settling time Light source- Tungsten-halogen 6V, 20W average 2000 hour life Sample chamber Accepts sample tubes up to 200mm Communication interface- Two RS 232 serial ports, one parallel printer port and one Auxiliary port Calibration- Automatic calibration Temperature display- Accurate ± 0.5°C and resolution 0.1°C - Input power – 220V, 50/60 Hz

1

-Length – 200 mm , with water jacket, Stainless steel flow

1 1 1 1

- Length – 200mm, borosilicate, with center well. - Length -100mm, borosilicate, with center well. - Temprature -20 to – 100 0C, Suitable to the polarimeter -Measuring scales – Refractive index (RI), Brix, Temperature corrected Brix and Refractive index -Measuring range – 1.33-1.53 RI, 0-95 Brix -Liquid for refractometer calibration- NIST traceable calibration liquid from 1.33 – 1.70 -Resolution- 0.00001 RI, 0.01Brix -Reproducibility - ± 0.00002 RI, ± 0.015Brix -Accuracy - ± 0.00004 RI, ± 0.03 Brix -Communication interface- Two RS 232 serial ports, one parallel printer port and one Auxiliary port Temp. control range – 10°C – 50°C Temp accuracy- 0.05°C - Calibration- 1,2 or full multi-point calibration Latest processor type Windows XP with soft ware Processor Speed: 2GHz processor speed Hard Drive Capacity: > 160GB SATA hard drive capacity 2GB, Screen Size: 15.4 inches Processor Type: Intel Celeron - Memory (RAM): 2 GB

1

3500

1400

23200

1

Three in one, workable in assemble with the polarimeter

30

29.7.Printer, Scanner & copier (Three in one) Jeffco Cutter Grinder

1

31

Jeffco Wet – Disintegrator

1

32

Weighing Balance (2-Kg)

1

33

Weighing Balance digital,(6100 g)

3

34

Thermostatic Hot water bath

1

35

Moisture Teller (Cane,Bagasse dryer)

1

Construction- Fabricated Steel Body, Cast Aluminum Bowl, Stainless Steel Spindle, Fiberglass Pulley Cover, Precision Ball Bearings Finish- Multilayer Acrylic Lacquer Electronic Control – Custom Microprocessor Controller, Mylar Front Panel 3 Programmable Presets, Non-volatile Memory, Dual Green LED Displays, 0-99 minutes timing cycle Electrical - Motor 3.0 kW 3Ø, 2880 RPM 415V; 50 Hz Bowl Capacity – Maximum: 14 liters Drive Mechanism – Single wide Poly-V® Belt, Dual 50/60 Hz Pulleys Water Jacket Cooling – Maximum: 10 litres/Min Machine Dimensions – 606 W x 1390 H x 860 D - Recommended spareparts Construction- Fabricated Steel Body, Cast Aluminum Bowl, Stainless Steel Spindle, Fiberglass Pulley Cover, Precision Ball Bearings Finish- Multilayer Acrylic Lacquer Electronic Control – Custom Microprocessor Controller, Mylar Front Panel 3 Programmable Presets, Non-volatile Memory, Dual Green LED Displays, 0-99 minutes timing cycle Electrical - Motor 3.0 kW 3Ø, 2880 RPM 415V; 50 Hz Bowl Capacity – Maximum: 14 liters Drive Mechanism – Single wide Poly-V® Belt, Dual 50/60 Hz Pulleys Water Jacket Cooling – Maximum: 10 litres/Min Machine Dimensions – 606 W x 1390 H x 860 D (mm) - Recommended spare parts Analytical readability : 0.01 gram and digital Capacity : 2000 gram 2kg), reproducibility: ± 0.0 1 gram Linearity : ≤ ± 0. 02 gram, response time: 2.5 – 5 sec Weighing pan diameter : 100 – 200 mm Operating temperature: 100C – 450C - Standard features: Ac adapter, draught shield, level indicator, data interface, etc Analytical readability- 0.2 gram, capacity : 6100 gram Reproducibility: ≤ ± 0.0 1 gram, linearity- ≤ ± 0. 02 gram. Response time: 2.5 – 5 sec., weighing pan diameter: 100 – 200mm. Operating temperature- 100C – 450C Standard features – Ac adapter, draught shield, level indicator, data interface, etc - Power in put – 220V, 50/60Hz Capacity – 45 Liters Temperature range – From +10 °C (however 5°C above ambient)up to +95°C Internal dimensions (wxdxh) mm – 350 x 590 x 220 Display resolution – 0.1°C Interior heating concept – Easy to clean, laser welded, stainless steel interior, reinforced by deep drawn ribbing, corrosion-proof. Triple over temperature protection- In case of over temperature due to fault the heating is switched off at approx. 10° above the set temperature - Power- 230V, 50/60Hz, single phase supplies General – Single sit drying oven with all electronics temperature sensor and controller with solid state relay, Capacity – 8 Pans at a time

24900

62000

3500

36

Ion selective meter with different electrode

1

37

Deep Freeze (Local purchase)

1

38

Nutch Filter Apparatus

1

39

Sulphur dioxide gas in cylinder(SO2 gas) 78 kg Carbon dioxide gas in cylinder(CO2 gas) 31 kg Spare parts for Autopol 880 41.1. Tungsten-Halogen lumps 41.2. Prism for Autopol Glan Thompson calcite 41.3. Pol tube 200mm with temperature sensor for Autopol 41.4. Cover glass for pol tube 41.5. Washer for Auto pol tube Spare parts for Refractometer RUDOLPH RESEARCH J157 Series 42.1. Light source for refractometer (Light emitting Diode) Spare for Wet disintegrator Model WDO2 43.1. Driving belt Belt 43.2. Cutting Blade Spare for Jeffco cutter Model CGO2 44.1. Jeffco blade 44.2.Bearing Spare for spectrophotometer 45.1. Cuvet for spectrophotometer 1,2, 5 cm (6 pieces of each) Spare for sieve shaker

2

Temperature range ambient to 250°C, accuracy ± 2°C, Time and audible alarm temperature cut out, extra fan brake. Included recommended spare parts Air fan 160mmø operating at 200rpm, control panel with instrumentation of pilot light, rocker switches temperature controller etc, Over temperature sensor- to switch off mains to protect elements and pan.Sample pans with wire cloth bottoms and different mesh size. Stainless steel 304, Capacity 100 gms minimum. Moisture teller tongs and soft brushes -Power: 220-240V, 50/60Hz, single phase. General- Ion selective meter with the following selective electrodes to measure sulphate, phosphate, nitrate and ammonia. Sulphate selective electrode (Qty-2) Phosphate selective electrode (Qty-2) Nitrate selective electrode (Qty-2) Ammonia selective electrode (Qty-1) Short response time, unaffected by color or turbidity - Power – 230V, 50/60Hz, single phase. -Temperature zone: -10 to -45oC. Ambient temperature – 16 to 40 oC Capacity – 550 Liters Power – 230V, 50/60Hz, single phase -Power: 250V 50/60Hz, single phase. Suitable for filtering massecuite to calculate exhaustion level -Capacity – 300 grams of mother liquor. - Construction material – Stainless steel - 78 kg. each cylinder

2

- 31 kg. each cylinder

6 3

- 6Volt, 20w - Suitable for Autopol 880

2

-200mm length, with temperature sensor connections

10 10

- Suitable for 200mm pol tube - Suitable for 200mm pol tube

3

- Light emitting Diode

4 3

-Singlewide poly-V belt for Model WDO2. - 100 mm reversible

3 3

- Part no. E565 - For main spindle part no.3209A

18

Operating range 200 to 2500nm Special optical glass

40 41

42

43

44

45

46

125000

46.1. Taylor screen 212,150,106 mm opening (3pieces each)

Sieve diameter 200mm