Specification Epabx_rev.-a .pdf

SPECIFICATION – EPABX

SHOLAYAR PH-1

TECHNICAL REQUIREMENT:S.No. A) 1.

Description Scope: EPABX (Electronics Private Automatic Board Exchange) Model Make It will have following features: Operator Console (OS 15T+Module) Analog Trunk (provision) Digital Extension (provision) Analog Extension (provision) 8 Parity conference in multiple Networking feature CSTA/TPI open standard VoIP E&M Tie line S0, S2M Support Auto attendant messages Expandable to 100 extensions or more in future

2.

3.

B)

Other Items: Telephone equipment Make Digital telephone Co-axial cable Connector for telephone equipment KRONE type tool UPS (2KVA) with battery Battery (suitable for power back up-4 h) Technical Specification: Operating Voltage Weight Dimension (W x D x H) Environmental conditions

Details

1 Set Open Scape Business X-8 Unified communication server Unify (Formerly known as Siemens) 1 8 8 32 Yes Yes Yes Yes Yes Yes Yes Yes

10 Nos. Beetel, with caller ID 2 Nos. 650 m 40 Nos. 1 Nos. 1 Nos. Capacity suitable for EPBAX System 100-240 V AC/48V DC 34 Kgs 440x430x490 +5 to 40 deg

General requirements Standard

TCN 68-136: 1995 TCN 68-146: 1995

Non-blocking switching structure Be able to set up connecting network with digital trunk line EM and NM port for control purposes Services: Hotline, Group call, Transfer call, Forwarding, call waiting... Be able to connect to public telephone network and power telephone network With interfaces as: CO analog, E&M tie-lie, Page 2 of 3

SPECIFICATION – EPABX

SHOLAYAR PH-1

S0, S2M, and support so many terminal equipment: analog telephone, digital telephone, that ensure to satisfy all requirements and using conditions Have capability of flexible numbering Be able to support advantage services Use Flash ROM to store data Integrated or separate MODEM and Console Password to login to be divided into two levels for Network management and Operator Installation C)

D)

E) 1. 2. 3.

Technical requirements Completed PABX with cabin, power supply, cable, lightning arrester, management software, MDF, over voltage protection attached… Analog subscriber Digital subscriber Capable of Extension (future) Description Junction line Exchange type technology Operation supply Facility

Any other Location of Telephone: Turbine floor Generator floor Control Room Service Bay DG Room EE office

+ Installing environment: according to TCN 68-149:1995 standard

1 25 lines 2 100 subscriber Details 4 Fully non-blocking type PCM-TD 48V DC Call transfer, call forward, conference etc Distinct tones like dial tone, busy tone and NU tone. In case of power failure, this should work on standby battery and switchover from main supply to standby. To be informed by supplier 2 Nos. 2 Nos. 1 No. 1 Nos. 1 Nos. 1 Nos.

Note to Supplier: Supplier has to provide all accessories, hardware, cable, connector, plug, tool etc, which are not mentioned in specification but required for installation, commissioning and operation of the equipment. Tender specification enclosed Vendor has to inform the deviation if any from specification

Page 3 of 3