Sony Dvp-s325 Dvp-s525d Dvp-s725d
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Sony Dvp-s325 Dvp-s525d Dvp-s725d as PDF for free.
More details
- Words: 35,360
- Pages: 134
DVP-S325/S525D/S725D RMT-D108O/D108P/D109P/D111O/D111P
SERVICE MANUAL
AEP Model DVP-S325/S525D/S725D
East European Model North European Model DVP-S325/S525D/S725D
Russian Model DVP-S325/S525D/S725D
Australian Model DVP-S525D/S725D
E Model DVP-S725D Photo: DVP-S725D
SPECIFICATIONS CD/DVD player Laser Signal format system
Semiconductor laser PAL/(NTSC)
Audio characteristics Frequency response
Signal-to-noise ratio
Harmonic distortion Dynamic range Wow and flutter
DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1 dB)* (S325/S525D) DVD (PCM 96 kHz): 2 Hz to 44 kHz (±0.5 dB)* (S725D) DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB) CD: 2 Hz to 20 kHz (±0.5 dB) More than 110 dB (LINE OUT (AUDIO) connectors only) (S325/S525D) More than 110 dB (AUDIO OUT connector only) (S725D) Less than 0.0025% More than 100 dB (DVD) More than 98 dB (CD) Less than detected value (±0.001% W PEAK)
Outputs and inputs
LINE OUT (AUDIO) (S325/S525D) AUIO OUT (S725D) DIGITAL OUT (OPTICAL) DIGITAL OUT (COAXIAL) LINE OUT (VIDEO) (S325/S525D)
VIDEO OUT (1, 2) (S725D) S VIDEO OUT (S325/S525D) S VIDEO OUT (1, 2) (S725D)
COMPONENT VIDEO OUT (Y, CB/B-Y, CR/R-Y) (S725D) PHONES (EXCEPT S325) 5.1CH OUTPUT (EXCEPT S325)
Phono 1.0 Vp-p jacks 4-pin Y: 1.0 Vp-p mini DIN C: 0.3 Vp-p (PAL) C: 0.286 Vp-p (NTSC) phono Y: 1.0 Vp-p jacks CB/B-Y, CR/R-Y: 0.7 Vp-p Phone 12 mW jack Phono 2 Vrms jacks (at 50 kilohms)
75 ohms, sync negative 75 ohms, sync negative 75 ohms terminated
75 ohms, sync negative 75 ohms 32 ohms Over 10 kilohms
General
Jack type Phono jacks
Output level 2 Vrms (at 50 kilohms)
Load impedance
Power requirements Power consumption
Over 10 kilohms
Dimensions (approx.)
Phono jacks Optical output connector Phono jack Phono jacks
2 Vrms (at 50 kilohms) –18 dBm
Over 10 kilohms Wave length: 660 nm
0.5 Vp-p
75 ohms terminated
1.0 Vp-p
75 ohms, sync negative
Mass (approx.) Operating temperature
220 – 240 V AC, 50/60 Hz 16 W (S325) 17 W (S525D) 22 W (S725D) 430 × 95 × 305 mm (w/h/d) incl. projecting parts 3.3 kg (S325) 3.4 kg (S525D) 4.0 kg (S725D) 5°C to 35°C – Continued on next page –
CD/DVD PLAYER MICROFILM
Operating humidity
5% to 90%
Supplied accessories • Audio/Video connecting cord (1) • S video cable (1) • Remote commander (remote) RMT-D108O (1) (S525D: Australian) • Remote commander (remote) RMT-D108P (1) (S525D: EXCEPT Australian) • Remote commander (remote) RMT-D109P (1) (S325) • Remote commander (remote) RMT-D111O (1) (S725D: Australian) • Remote commander (remote) RMT-D111P (1) (S725D: EXCEPT Asutralian) • Size AA (R6) batteries (2) DVP-S325/S525D: * The signals from LINE OUT (AUDIO) connectors and 5.1 ch L, R connectors (S525D only) are measured. When you play the PCM sound tracks with 96 kHz sampling frequency, the output signals from the DIGITAL OUT (OPTICAL, COAXIAL) are converted to 48 kHz (sampling frequency). DVP-S725D: * The signals from AUDIO OUT connectors and 5.1 ch L, R connectors are measured. When you play the PCM sound tracks with 96 kHz sampling frequency, the output signals from the DIGITAL OUT (OPTICAL, COAXIAL) are converted to 48 kHz (sampling frequency). Design and specifications are subject to change without notice.
WARNING!!
CLASS 3B LASER LUOKAN 3B LASER LASERKLASS 3B
WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 25 cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK. CAUTION: The use of optical instrument with this product will increase eye hazard. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges.
4. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.
2. Check the interboard wiring to ensure that no wires are “pinched” or contact high-wattage resistors.
5. Check the B+ voltage to see it is at the values specified.
3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
–2–
TABLE OF CONTENTS Section
Title
Page
Section
GENERAL Getting Started .............................................................. Playing Discs ................................................................. Using Various Functions with the Control Menu ........... Settings and Adjustments .............................................
2.
Case Removal ............................................................... MB-82/85 Board Removal ............................................. Power Block Removal ................................................... ER-4/5 Board Removal (EXCEPT Australian) .............. AU-209/212 Board Removal (S325/S525D) ................. AU-210/211 Board Removal (S725D) ........................... Tray Cover Removal ..................................................... Front Panel Removal .................................................... Mechanism Deck Removal ........................................... Tray Removal ................................................................ Optical Pick-up Removal ............................................... Belt, Loading Motor (M001), MS-29/TK-51/54 Board Removal .................................. 2-13. Internal Views ................................................................ 2-14. Circuit Boards Location .................................................
3.
BLOCK DIAGRAMS
3-1. 3-2. 3-3. 3-4. 3-5. 3-6. 3-7. 3-8. 3-9. 3-10.
Overall Block Diagram .................................................. RF/Servo Block Diagram .............................................. Signal Process Block Diagram ..................................... Video Block Diagram ..................................................... System Control Block Diagram ..................................... Audio (1) Block Diagram ............................................... Audio (2) Block Diagram ............................................... Audio (3) Block Diagram ............................................... Interface Control Block Diagram ................................... Power Block Diagram ....................................................
4.
PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
4-1.
Frame Schematic Diagrams .......................................... FRAME (1) Schematic Diagram .................................... FRAME (2) Schematic Diagram .................................... FRAME (3) Schematic Diagram .................................... Printed Wiring Boards and Schematic Diagrams ......... TK-51/54 Printed Wiring Board ..................................... TK-51/54 Schematic Diagram ....................................... MS-29 Printed Wiring Board and Schematic Diagram ....................................................... MB-82/85 Printed Wiring Board .................................... MB-82/85 (AV DECODER) Schematic Diagram ........... MB-82/85 (SDRAM) Schematic Diagram ..................... MB-82/85 (SERVO DSP) Schematic Diagram ............. MB-82/85 (DRIVE) Schematic Diagram ....................... MB-82/85 (ARP) Schematic Diagram ........................... MB-82/85 (SYSTEM CONTROL) Schematic Diagram ....................................................... MB-82/85 (HGA) Schematic Diagram ........................... MB-82/85 (CLOCK GENERATOR, AUDIO DSP, V EQ/NR) Schematic Diagram ...................................... MB-82/85 (DAC) Schematic Diagram ........................... MB-82/85 (BIAS) Schematic Diagram .......................... AU-209 Printed Wiring Board ....................................... AU-209 (AUDIO) Schematic Diagram .......................... AU-209 (VIDEO BUFFER) Schematic Diagram ........... AU-210 Printed Wiring Board ....................................... AU-210 (AUDIO) Schematic Diagram .......................... AU-210 (VIDEO BUFFER) Schematic Diagram ...........
4-2.
1-1 1-4 1-6 1-12
DISASSEMBLY
2-1. 2-2. 2-3. 2-4. 2-5. 2-6. 2-7. 2-8. 2-9. 2-10. 2-11. 2-12.
Page
AU-211 Printed Wiring Board ........................................ 4-57 AU-211 (AUDIO) Schematic Diagram ........................... 4-61 AU-211 (VIDEO BUFFER) Schematic Diagram ........... 4-63 AU-212 Printed Wiring Board ....................................... 4-65 AU-212 (AUDIO) Schematic Diagram .......................... 4-67 AU-212 (VIDEO BUFFER) Schematic Diagram ........... 4-69 ER-4 Printed Wiring Board ............................................ 4-71 ER-4 (EURO AV1) Schematic Diagram ........................ 4-73 ER-4 (EURO AV2) Schematic Diagram ........................ 4-75 ER-5 Printed Wiring Board ............................................ 4-77 ER-5 (EURO AV1) Schematic Diagram ........................ 4-81 ER-5 (EURO AV2) Schematic Diagram ........................ 4-83 FL-98/101 Printed Wiring Board ................................... 4-87 FL-99/100 Printed Wiring Board ................................... 4-89 FL-98/99/100/101 (FUNCTION SWITCH) Schematic Diagram ....................................................... 4-93 FL-98/99/100/101 (IF CON) Schematic Diagram ......... 4-95 SW-314/315/316/317, FR-147/148/149/150 Printed Wiring Boards ................................................... 4-97 SW-314/315/316/317, FR-147/148/149/150 Schematic Diagram ....................................................... 4-99 HP-108/109/110/111 Printed Wiring Boards and Schematic Diagram ..................................................... 4-101 RY-12 Printed Wiring Board and Schematic Diagram ..................................................... 4-103 HS-030SH Printed Wiring Board ................................ 4-105 HS-030SH Schematic Diagram .................................. 4-107
Service Note ............................................................................ 4
1.
Title
2-1 2-1 2-1 2-1 2-2 2-2 2-2 2-2 2-3 2-3 2-3 2-3 2-4 2-5
3-1 3-3 3-5 3-7 3-9 3-11 3-13 3-15 3-17 3-19
4-3 4-3 4-5 4-7 4-9 4-9 4-13 4-15 4-17 4-21 4-23 4-25 4-27 4-29 4-31 4-33 4-35 4-37 4-39 4-43 4-45 4-47 4-49 4-53 4-55
5.
IC PIN FUNCTION DESCRIPTION
5-1.
System Control Pin Function (MB-82/85 Board IC202) ............................................... 5-1
6.
TEST MODE
6-1. 6-2. 6-3. 6-4. 6-5. 6-6. 6-7. 6-8. 6-9.
General Description ...................................................... 6-1 Starting Test Mode ........................................................ 6-1 Syscon Diagnosis .......................................................... 6-1 Drive Auto Adjustment .................................................. 6-5 Drive Manual Operation ................................................ 6-7 Mecha Aging ................................................................. 6-9 Emergency History ........................................................ 6-9 Version Information ....................................................... 6-10 Video Level Adjustment ................................................ 6-10
7.
ELECTRICAL ADJUSTMENT
7-1. 1. 7-2. 1. 2. 3. 4. 5. 6. 7. 8. 9. 7-3.
Power Supply Adjustment ............................................. HS030SH Board ............................................................ Adjustment of Video System ......................................... Video Level Adjustment ................................................. S-terminal Output Check ............................................... Checking Component Video Output B-Y ...................... Checking Component Video Output R-Y ...................... Checking Component Video Output Y .......................... Checking RGB Output R ............................................... Checking RGB Output G ............................................... Checking RGB Output B ............................................... Checking S Video output S-C ....................................... Adjustment Related Parts Arrangement .......................
8.
REPAIR PARTS LIST
7-1 7-1 7-2 7-2 7-2 7-2 7-2 7-3 7-3 7-3 7-3 7-4 7-6
8-1. Exploded Views ............................................................. 8-1 8-1-1. Case Assembly (S325/S525D) ................................ 8-1 8-1-2. Case Assembly (S725D) .......................................... 8-2 8-1-3. Front Panel Assembly .............................................. 8-3 8-1-4. Chassis Assembly .................................................... 8-5 8-1-5. Mechanism Deck Assembly ..................................... 8-7 8-2. Electrical Parts List ........................................................ 8-8
–3–
SERVICE NOTE 1. DISASSEMBLY • This set can be disassembled in the order shown below.
Set
Case (Page 2-1)
Tray Cover (Page 2-2)
MB-82/85 Board (Page 2-1)
ER-4/5 Board (EXCEPT Australian) (Page 2-1)
Front Panel (Page 2-2)
Mechanism Deck (Page 2-3)
AU-209/211 Board (EXCEPT Australian) (Page 2-2)
AU-210/212 Board (Australian) (Page 2-2)
Tray (Page 2-3)
Optical Pick-up (Page 2-3)
TK-51/54 Board (Page 2-3)
Belt (Page 2-3)
Loading Motor (M001), MS-29 Board (Page 2-3)
–4–
Power Block (Page 2-1)
2. NOTE ON REMOVE THE CASE
4.
1) Remove seven screws. (See Fig. 1) 2) Open the side of case. (See Fig. 1) 3) Remove the case as lift straight. (See Fig. 1)
1) Remove the case from the set. (Refer to 2-1) 2) Remove the MB-82/85 board. (Refer to 2-2) 3) Set the MB-82/85 board as shown in Fig. 3. Note: Do not disconnect wiring, except FMA-7/8/9.
HOW TO SERVICE MB-82/85BOARD
Case Two screws Three screws
MB-82/85 board Two screws grooves
Fig. 1 Fig. 3
3. DISC REMOVAL PROCEDURE (at POWER OFF) 1) Insert a tapering driver into the aperture of the unit bottom, and move the lever of chuck cam in the direction of the arrow A. (See Fig. 2) 2) Draw out the tray in the direction of the arrow B, and remove a disc. (See Fig. 2)
Lever of chuck cam Aperture
B A Tray
Fig. 2
–5–
DVP-S325/S525D/S725D SECTION 1 GENERAL
1-1
This section is extracted from DVP-S725D instruction manual (3-866-153-21).
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-9
1-10
1-11
1-12
1-13
1-14
1-15
1-16
1-17 1-17E
DVP-S325/S525D/S725D SECTION 2 DISASSEMBLY Note: Follow the disassembly procedure in the numerical order given.
2-1. CASE REMOVAL
2-3. POWER BLOCK REMOVAL
4 Case
2 Connector 3 Three connectors (CN101) (CN201, 202, 203) 1 Connector (CN102) (S725D)
2 Two screws
1 Three screws
4 Four screws (B3)
3 Two screws 5 Power block
2-4. ER-4/5 BOARD REMOVAL (EXCEPT Australian)
2-2. MB-82/85 BOARD REMOVAL
4 Two flat cables 5 Flat cable (CN004, 007) (CN005) (S525D/S725D) 2 Two flat cables (CN002, 003)
3 Connector (CN001)
1 Two flat cables (CN901, 902) 3 ER-4 board (S325/S525D) ER-5 board (S725D)
7 Four screws (B3)
2 Four screws (B3)
1 Connector (CN011)
6 Flat cable (CN006) 8 MB-82 board (Australian) MB-85 board (EXCEPT Australian)
2-1
2-5. AU-209/212 BOARD REMOVAL (S325/S525D)
2-7. TRAY COVER REMOVAL
3 Flat cable 4 Flat cable !º AU-209 board (CN302) (CN303) (S325/S525D: EXCEPT Australiran) (S525D: Australian) AU-212 board 9 Three screws (S525D: Australian) (B3) 5 Flat cable 2 Connector (CN301) (CN401)
4 Tray cover
6 Screws (B3) (S525D: Australian)
3 Two claws
B
7 Five screws (B3)
2 Pull the tray in the direction of the arrow B.
A
1 Insert a tapering driver into the aperture of the unit bottom, and move the lever of chuck cam in the direction of the arrow A.
1 Connector (CN201)
8 Two screws (B3) (S525D)
2-6. AU-210/211 BOARD REMOVAL (S725D)
2-8. FRONT PANEL REMOVAL 4 Screw (B3) (S525D/S725D)
3 Two connectors 6 Three screws (CN301, 404) (B3) 2 Connector 4 Three flat cables (CN401) (CN402, 403, 405)
2 Connector (CN701) (S525D/S725D)
7 AU-210 board (Australian) AU-211 board (EXCEPT Australian)
5 Two screws (B3)
6 Boss
1 Connector (CN203) 7 Boss
5 Nine screws (B3)
9 Claw
!º Front panel
8 Claw
1 Connector (CN407)
2-2
3 Flat cable (CN006)
2-9. MECHANISM DECK REMOVAL
2-11. OPTICAL PICK-UP REMOVAL
3 Screw (B3)
4 Mechanism deck
5 Optical pick-up
4 Three step screws
2 Two flat cables (CN003, 004)
3 Remove the base unit holder in the direction of the arrow A.
A
1 Connector (CN001)
1 Two flexible board (CN001, 002)
2-10. TRAY REMOVAL
2 Chuck ass’y
2-12. BELT, LOADING MOTOR (M001), MS-29/TK-51/54 BOARD REMOVAL 1 Two screws (BTP2.6 × 12)
1 Belt 2 Two screws (B2.6 × 4)
9 TK-51/54 board B
4 Remove the tray in the direction of the arrow B.
2 Two claws
8 Claw
5 Flexible board (CN002) A
3 Move the lever of chuck cam in the direction of the arrow A. 3 Three claws 4 Loading motor (M001), MS-29 board
2-3
6 Flexible board (CN001) 7 Claw
2-13. INTERNAL VIEWS
DC motor (loading) 1-541-632-11
Optical pick-up (KHM-220AAA/J1RP) 8-820-081-03
2-4
2-14. CIRCUIT BOARDS LOCATION
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
2-5 2-5E
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
DVP-S325/S525D/S725D SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM MB-82/85 BOARD
AU-209/210/211/212 BOARD
S725D
(SEE PAGE 4-45,47,53,55,61,63,67,69)
(SEE PAGE 4-21~39)
BASE UNIT
TK-51/54 BOARD
KHM-220AAA
(SEE PAGE 4-13)
IC502
16M SDRAM
V EQ/NR
PDO 0-7
16M DRAM
S525D/725D
IC402, 403
VIDEO Y, VIDEO B-Y, VIDEO R-Y
VIDEO V, VIDEO Y, VIDEO C
OPTICAL DEVICE SD 0-7 IC001 DVD/CD PDIC
RF
DVD/CD RF AMP DIGITAL SERVO
DVD RF, CD RF
VIDEO BUFFER
PDI 0-7
IC304
IC303 ARP2
AV DECODER
S325/ S525D: EXCEPT Australian S725D: EXCEPT Australian
SPDIF, ACH12, ACH34, ACH56, BCK, LRCK
CDDOUT, CDDATA, CDBCK, CDLRCK
VIDEO
VIDEO BUFFER
S VIDEO
S525D/S725D
IC401
COMPONENT VIDEO
IC501 AUDIO DSP
IC901-903 RY901-903
VIDEO R, VIDEO G, VIDEO B
EURO AV1 (RGB)-TV
SW, BUFFER
RY904,905 Parallel BUS
FOCUS COIL
EURO AV2
SW
ER-4/5 BOARD (SEE PAGE 4-73,75,81,83)
IC801 TRACKING COIL
FOCUS COIL/ TRACKING COIL/ TILT MOTOR DRIVE
IC202 IC701
TILT MOTOR
IC205 : S325/S525D
SYSTEM CONTROL
IC601
SERVO DSP
M
IC204 1M SRAM
DIGITAL OUT
SPDIF
IC206 : S725D
HGA
16M FLASH IC902 IC201
AUDIO LT, AUDIO RT
AUDIO 2CH DAC
LPF, GAIN CONTROL
AUDIO OUT
4K EEP ROM
SPINDLE MOTOR
Serial BUS
M
HP-108/109/ 110/111 BOARD
S725D
(SEE PAGE 4-102) SLED MOTOR
M001 LOADING MOTOR
M
IC802
IC602
SPINDLE/SLED/ LOADING MOTOR DRIVE
16M NAND-F
HEADPHONE AMP
PHONES
S525D/S725D
IC905-907
M
AUDIO L, R AUDIO LS, RS AUDIO C, LFE
LPF
5.1CH OUTPUT
AUDIO 5.1CH DAC ND201
IC201
MS-29 BOARD
+3.3V +5V A+12V M+12V
IF CON
(SEE PAGE 4-16)
05
FL-98/99/100/101 BOARD
+3.3V +5V +12V –12V EVER5V
S725D AC10V
SWITCH
(SEE PAGE 4-93,95) T901 JOG UNIT
RY-12 BOARD
FR-147/148/149/150 BOARD
S525D/S725D
(SEE PAGE 4-104)
(SEE PAGE 4-99)
SWITCH
HS-030SH BOARD
SWITCH
(SEE PAGE 4-107)
SW-314/315/316/317 BOARD (SEE PAGE 4-99)
3-1
–12V EVER5V
SW REG
3-2
DVP-S325/S525D/S725D 3-2. RF/SERVO BLOCK DIAGRAM TK-51/54 BOARD
BASE UNIT
MB-82/85 BOARD(1/7)
IC001%¢(DVD play) 500mV/DIV 100ns/DIV
(SEE PAGE 4-13)
KHM-220AAA
(SEE PAGE 4-25,27)
IC0011(DVD play) 200mV/DIV 100ns/DIV
IC001$º(DVD play) 100mV/DIV 50ms/DIV
IC001$º(CD play) 500mV/DIV 50ms/DIV
180mVp-p
860mVp-p
IC701^•(DVD play) 100mV/DIV 5ms/DIV
IC701^ª(DVD play) 500mV/DIV 50ms/DIV
1.5Vp-p IC001%¢(CD play) 500mV/DIV 500ns/DIV
536mVp-p IC0011(CD play) 500mV/DIV 500ns/DIV
DVD/CD RF AMP DIGITAL SERVO
OPTICAL DEVICE CN001 RF
7
1
RF IP
IC001#ª(DVD play) 500mV/DIV 50ms/DIV
IC001#ª(CD play) 500mV/DIV 200ms/DIV
1.3Vp-p
1.7Vp-p
1.5Vp-p
IC001 880mVp-p
CN003
CN002 17
SIGO 54
RF+
1.4Vp-p
180mVp-p
IC701^ª(CD play) 500mV/DIV 200ms/DIV
IC701^•(CD play) 500mV/DIV 50ms/DIV
1.7Vp-p
860mVp-p
DVD RF
2
CD RF FE 40
A-D
DVD/CD PDIC
E-H
VC
PD DVD/CD LD MODULE
LD VR
9 10 16 17
9 ı A-D 12 5 ı A2-D2 8 13 ı E-H 16
8 11 15 18
Q001 LD DRIVE
2
8
PI 29
7
TE PI
SIGNAL PROCESS 11
69 ADC0
MDS0
12
67 ADC2
MDP0
(SEE PAGE 3-5)
IC701 MIRR 26
3
TZC 32
5
VCI 33
6
5
TZC 2VC
SSCK, SSWD, 11 SSRD, SSCS ı 14
SCLK SWD 43 ı SRD 46 SDEN
20 LD
MIRR
21 TRIN
16
SERVO DSP
20 TRREF
14
+3.3V
23 FGIN 74 81 VRBA, 84 DAB 0-3 93 96
2VC
13 5 ı 8
41 ı 44
4
38 GIO 11
15
28 DFCTI
GIO 5-8
IC702 (2/2) 7
5
Q002
FDCHG 27
15
HOLD2 42
4
SSDFCT SSDFCTI
DFT 31
CN004 FCS
LOCK
68 ADC1
IC801
FOCUS COIL
FG REF 22
10
65 ADC4
19 PD
4
TE 39
FE
66 ADC3
17 VC
13
9
FCD
80 85
TRD
92 97
CN003
19 20
6 7
FCS
13 14
12 13
FOCUS COIL DRIVE
2 3
FCD
GIO 10 39
FCSON
HINT 128
XSDPIT
DAB 2,3
DAB 0, 1
Q801
HRD
1
XSDPRD
HWR
2
XSDPWR
HCS
3
XSDPCS
4 5
HA0, 1
9 21 22
4 5 IC001@ª(DVD play) 200mV/DIV 500ms/DIV
TRK
11 12
14 15
IC001@ª(CD play) 200mV/DIV 20ms/DIV
TRACKING COIL DRIVE
5 6
TRD
7
CN002 TILT MOTOR
M
592mVp-p
TIA, TIB 10 ı 13
3
1
15 ı 18
TIA, TIB
15 ı 18
1 ı 4
TILT MOTOR DRIVE
EA 0, 1
SLDA, SLDB, 7 STVC ı 9
PWM 0-2
117 ı HD 0-7 120 122 125
TILT MUTE
20
448mVp-p
GIO 1, 2
IC702 (1/2)
FGMODE 23 26
TLTA, TLTB
X2/CLKIN
TRK
RS
TRACKING COIL
TLTA,TLTB 48 49
26
108
46 GIO 4 50 GIO 0
IC803 (1/2) INLIMIT SENSOR
INLIM
2
8
INLIM
12 13
11
HD8-15
N27MSDP
14
XSDPRST
SYSTEM CONTROL
X3VRST
(SEE PAGE 3-9,10)
IC802
SPINDLE MOTOR
M
SPM
8 9
13 14
SPM
15 16
5 6
SPINDLE MOTOR DRIVE
Q802, 803 GAIN CONTROL
26
SPDLSTOP
20
SPGAIN SLED MOTOR
M
SLA, SLB 4 ı 7
9 ı 12
SLA, SLB
11 ı 14
7 ı 10
SLED MOTOR DRIVE
MS-29 BOARD
2 3 5 6
SLDA, SLDB, STVC
XDRVMUTE
9
LDMM/DMM
(SEE PAGE 4-16)
LDMP/DMP CN011
CN001 M001 LOADING MOTOR
M
1 2
S001 TRAY SENSOR
4 6
S002 CHUCK SENSOR
3
LDM
OCSW 1, 2
CKSW1
17 18
1 2
4 6
3
+3.3V
OCSW 1, 2
CKSW1
LOADING MOTOR DRIVE
+5V
OCSW1
23
OCSW2
IC803 (2/2)
CKSW1 5
7
2.5VC
10
8
2VC
3
1
1.6VC
05
3-3
3-4
DVP-S325/S525D/S725D 3-3. SIGNAL PROCESS BLOCK DIAGRAM S725D
MB-82/85 BOARD(2/7) (SEE PAGE 4-21,23,29,35)
IC502
91 SDCK, SDEF, 47 93 XSHD, XSAK, XSRQ ı ı 51 96
IC303 ARP2
DFCT
55 DFCT
NORF
56 NORF
LOCK
58 LOCK
FWON
59 FWON
MD2
113 MD2
MUTE
111 MUTE
XARPWR
60 XWR
XARPRD
61 XRD
XARPIT
83 XINT
XARPCS
84 XCS
XARPWT
86 XWAT
SDI
HSYNC
FLD
SENO
SDOUT
FLDO
HSYNCO
YO 0-7
NR-SENO
FLDO
HSYNCON
IC401%¶(RGB output model)
728mVp-p(H)
S525D/ S725D
816mVp-p(H)
RSTIN
D 0-7
VIDEO R/B-Y
B/R-Y OUT
57
VIDEO B/R-Y
COMP OUT
65
VIDEO V
Y OUT
61
VIDEO Y
C OUT
62
VIDEO C
1.1Vp-p(H) IC401^™
ACLKIN
A 0-7
63-68 70 71
SCKI
XRST
MCKI
73-76 79-82
54
1.2Vp-p(H)
166 167 193 194 196 198 ı 202
87 121 123
R/B-Y OUT
IC401 AV DECODER IC401^¡
XWRH
VIDEO G/Y
103 19 36 160 163
168-170 172-178 180-187 189-192
2-5 7-10 12-15 205-208
S325
ACH12O
21
ACH34O
22
ACH56O
23
LRCKO
25
BCKO
26
DO
27
70
X57RST
27M30
DREQ1
33M30
DACK1
DREQ0
33MARP
(SEE PAGE 3-9,10)
256FS30
VIDEO LEVEL ADJ
DACK0 XAVDRST
RV401
XAVDWT XARPRST
XAVDIT
SYSTEM CONTROL
XARPRST XAVDRST CDDOUT, CDDATA, CDBCK, CDLRCK
X57RST S725D 33MARP
ACH12 S525D/S725D
256FS30
ACH34 LRCK
HD 8-15
HA 0-7
HD 0-15
ACH56
27M30
HA 0-21
33M30 27M57 S725D
S325
BCK
AUDIO 1
SPDIF1
(SEE PAGE 3-11)
CDDOUT CDDATA CDBCK CDLRCK
HA 0-21
S525D/S725D
HD 0-15
05
3-5
VIDEO (SEE PAGE 3-7)
CDDOUT, CDDATA, 107 CDBCK, CDLRCK 29 ı ı 110 32
XRD
58
728mVp-p(H) IC401^∞
XCS2 XCS3
IC401%¶
G/Y OUT
27M57
LOCK
720mVp-p(H)
VREFI
52 MDP0
1.0Vp-p(H) IC401%•
75-78 80-83 72 73 98 99
HD 0-15
49 MDS0
MDP0
DT 0-7 I
720mVp-p(H) IC401%¢
1.0Vp-p(H)
86-89 91-94
120-123 125 127 129-132
HAD 0-21 I
MDS0
38 ı 43 45 46
IC401%• (RGB output model)
NR-SDOUT
RF, SERVO
SD 0-7
135 138 141 144 147 150 153 156
IC401%¢ (RGB output model)
93
97 98 31 29
PDI 0-7
97 98 SD 0-7 100 ı 105
134 137 140 143 146 149 152 155
SCLKIN
19 RFIN2
105-108 110-113 115-118
CLKI
17 RFIN1
CD RF
148 150-152
154-157 159-162 164-167 169-172
CRPCLKIN
DVD RF
136-139 141-144 146 147
60-67
PDO 0-7
1.6Vp-p
11-18
PDI 0-7
CLK, CKE, DQML, DQMU, CS, WE, CAS, RAS
DDT 0-15
DAD 0-11
XMWR, XCAS, XRAS, XOE
MD 00-15
MA 0-9
IC303!ª(CD play) 500mV/DIV 200ns/DIV
YI 0-7
IC402, 403 16M SDRAM
RST
PDO 0-7
IC304 16M DRAM 1.6Vp-p
(SEE PAGE 3-4)
CLK 100
V EQ/NR
CS
IC303!¶(DVD play) 500mV/DIV 100ns/DIV
3-6
DVP-S325/S525D/S725D 3-4. VIDEO BLOCK DIAGRAM MB-82/85 BOARD(3/7)
AU-209/210/211/212 BOARD(1/2)
(SEE PAGE 4-21,37)
(SEE PAGE 4-45,47,53,55,61,63,67,69)
S525D: Australian/ S725D
IC302 :S725D IC303 :S525D: Australian CN405 :S725D CN303 :S525D: Australian
CN004
SIGNAL PROCESS (SEE PAGE 3-6)
VIDEO G/Y
4
VIDEO R/B-Y
2
VIDEO B/R-Y
6
VIDEO G/Y VIDEO R/B-Y VIDEO B/R-Y
4
2
15
6
4
13
CB/B-Y
2
7
10
CR/R-Y
Y
7
VIDEO C
1
RGB EURO V/Y
EURO V/Y YUV VIDEO B VIDEO R VIDEO G
1
Q439,440 RGB/YUV SW
1 7
IC301,321!£
Q301, 302 BUFFER
1
3 5
VIDEO V VIDEO Y VIDEO C
6
1.2Vp-p(H)
VIDEO OUT2
2 4
J305 :S725D: Australian
S725D: EXCEPT Australian
CN406
IC301 :S725D IC321 :S325/S525D Y
VIDEO BUFFER
28
4
13
26
2
15
24
7
10
S VIDEO OUT1
C
J308 :S725D: EXCPET Australian J507 :S325/S525D: EXCEPT Australian Y S VIDEO OUT2
C V MUTE
8
V MUTE
21
1
23
Q301, 302 :S725D Q321, 322 :S325/S525D DC ON/OFF
(SEE PAGE 3-18)
(SEE PAGE 3-9,10)
J309 :S725D: EXCEPT Australian J506 :S325/S525D: EXCEPT Australian
VIDEO OUT1
2.4 Vp-p(H)
IC301,3212 1.1Vp-p(H)
1
J505 :S525D :Australian
IC301,3214
7
CN005
SYSTEM CONTROL
COMPONENT VIDEO OUT
VIDEO V VIDEO Y
INTERFACE CONTROL
J302 :S725D J303 :S525D: Australian
VIDEO BUFFER
J306 :S725D: Australian VS
6
DISC/EXT RGB EURO V/Y
18
VS DISC/EXT
11
CN402 :S725D CN301 :S325/S525DIC301,3217
CN902 17
VIDEO V
9
17
IC301,3210
13
860mVp-p(H)
3
IC301,321!∞
4 6 CN302 :S725D: EXCEPT Australian CN305 :S325/S525D: EXCEPT Australian
2.0Vp-p(H)
VIDEO Y VIDEO C V MUTE VS DISC/EXT
15
7
1
VIDEO B
4
15
R/C OUT
11
G OUT
2
IC903 3
7
B OUT
8
AV CONT OUT
16
I OUT
20
V IN
19
V OUT
15
R IN
11
G IN
CN904
3
2
13
1
SWITCH
4 Q914 RELAY DRIVE
6 IC902 SWITCH
VIDEO G
V/Y OUT
EURO AV1 (RGB)-TV
IC901 VIDEO BUFFER
2
RY901
1
CN901 VIDEO R
19
8
7
3
1.8mVp-p(H)
V/Y IN
RY903
15
S325/ S525D: EXCEPT Australian S725D: EXCEPT Australian
20
2
15
7
4
4
13
4
6
7
10
7
3
2
8 3 9
2
1
1 MUTE Q917 EURO V/Y YUV
1
Q918 MUTE CONT
7
S725D: EXCEPT Australian
Q909,910 RELAY DRIVE CONT
CN903
Q912 RELAY DRIVE
EURO AV2
AUDIO 2 :S325/S525D (SEE PAGE 3-14)
AUDIO 3 :S725D
4
3 2
Q901-903 I SIG GEN
(SEE PAGE 4-73,75,81,83)
S325/S525D: EXCEPT Australian/S725D: EXCEPT Australian
3-8
Q904,905 I SIG SW
I IN
8
AV CONT IN
1
Q913 RELAY DRIVE
3-7
16
8
7 Q906-908 AV CONT GEN
05
B IN
9
(SEE PAGE 3-16)
ER-4/5 BOARD(1/2)
7 RY902
RELAY DRIVE CONT
DVP-S325/S525D/S725D 3-5. SYSTEM CONTROL BLOCK DIAGRAM S325/S525D
S725D
MB-82/85 BOARD(4/7)
POWER ON RESET
RST
CS0L
5 SC0 SO0 CE
CS0 11
SI0
4 SK
23 XECS
5 DI
WC 8
24 XEWC
6 DO
R/B 1
25 XEBSY
(SEE PAGE 3-15)
HD 0-15
HA 1-20
4 WE, RY/BY, UB, LB, OE 112 113 124 125
SYSTEM CONTROL
AUDIO 3 :S725D
HD 8-15 126-133
CS
10
141 CS1
CS4
7
142 CS4
RD
22
145 HRD
WR0
23
WR1
24
144 HWRH 143 HWRL
RDY
19
INT1 INT3
CS1
GAIN2
IC001!¢(DVD play)
CKSEL
CS0H/PB2
DW0/PB3
A22/P66
RAS1/PB4 6
XT1
LDMP/DMP 92
LDMP/DMP LDMM/DMM
NORF
102 NORF
OCSW1 64
OCSW1
DFCT
103 DFCT
OCSW2 63
OCSW2
FWON
104 FWON
CKSW1 88
CKSW1
LOCK
105 LOCK
XCS3
INT0 95
XAVDIT
DACK1 84
DACK1
DACK0 85
DACK0
DREQ1 86
DREQ1
DREQ0 87
DREQ0
SIGNAL PROCESS (SEE PAGE 3-5)
SIGNAL PROCESS (SEE PAGE 3-5)
XARPRST
106 ARPRST
XARPIT
107 ARPINT 108 ARPWT
XARPWT
VIDEO DISC/EXT (SEE PAGE 3-7) S325/ S525D: EXCEPT Australian S725D: EXCEPT Australian
01IT0 29
S525D/S725D X01INT0
XARPRD
109 ARPWR 110 ARPRD
01IT1 30
X01INT1
XARPCS
111 ARPCS
01CS 28
X01CS
XAVDWT XAVDRST X57RST S725D
XDACS0 XDACS1 1
7
384FSDA
3
5
384FS01
IC003
XDRVMUTE
LDMM/DMM 91
8
VIDEO (SEE PAGE 3-7)
AUDIO 1 (SEE PAGE 3-11)
VS RGB EURO V/Y S325/ S525D: EXCEPT Australian S725D: EXCEPT Australian
72 AVDWT 71 AVDRST 27 57RST
XDACS2 96
XDACS2
97
XDACS3
01RST 31
X01RST
6
IFSC0
SO0
1 1A
1Y
3
IFSO0
INTERFACE CONTROL
IFSI0
(SEE PAGE 3-18)
SI0
DACRST 26
XDACRST
MA MUTE 49
MA MUTE
256FS30
SCKO1 12
33MARP 33M30 IC004
52 RGB SEL 51 EURO V/Y
5
6
2
1
7
SIGNAL PROCESS
27M30 N27MHGA IC0042,5,7
N27MSDP
AUDIO 2 :S325/S525D (SEE PAGE 3-13) (SEE PAGE 3-15)
S725D 27M57
4.6Vp-p(33.8MHz)
(SEE PAGE 3-11)
AUDIO 3 :S725D
59 MCK
(SEE PAGE 3-5)
3
AUDIO 1
53 VS
27M01 S525D/S725D
SCKO2 14
RF, SERVO (SEE PAGE 3-4)
4.2Vp-p(26.9MHz)
05
3-9
XVIFCS
2Y
(SEE PAGE 3-4)
XDRVMUTE 93 99 MD2
DVD:6.2Vp-p(37.0MHz) CD:5Vp-p(33.6MHz)
SCKO3 17
IC001!™
4Y 11
4 2A
RF, SERVO
98 MUTE
CS3
IC0016
4.2Vp-p(27.0MHz)
12 4A
SC0
SPGAIN
MD2
XARPWR
DVD/CD
ML
CS0L
SPDLSTOP
MUTE
XCS2
IC0035,7
SPGAIN 94
3-10
(SEE PAGE 3-11)
S525D/S725D
IC203
XSDPIT
XWRH 9
RAS0/PB0 85
SPDLSTOP 57
AUDIO 1
BUFFER
XSDPRST
XSDPCS
3 RST 135 CPUCK
S525D/S725D
1
SDPIT 115
XSDPRD
CS2
PLL
19 MD
SI1
FCSON
SDPCS 118
XRD
IC001
FCSON 54 SDPRST 114
XSDPWR
5
4Vp-p(25.3MHz)
DVD:5.8Vp-p(36.5MHz) CD:5.1Vp-p
X001 27MHz
SO1
SI1
XFRRST XIFINT
SDPRD 117
99 98
IC001!¶
SC1
SO1
XFRRST
155 XINT3
CLK
IC001!¢(CDplay)
4.7Vp-p(22.5MHz)
2 ı 5 40 ı 43
88 83
4.2Vp-p(25.3MHz)
66 100
HGA
5 ı 11 56
TEST, CLE, ALE, XWE, XWP, XCE, XRE, R/B
SDPWR 116
PF7/OCPA0/ATG
IC202(™
2.4Vp-p(12.5MHz)
IC601
FD 0-7
94
91 X1 92 X0
12 ı 19
157 WAIT 156 XINT1
IC2025
X201 12.5MHz
NFD 0-7
18 ı 21 24 I/O 0-7 ı 27
SC1
XIFINT 22
3 PB7/DW1
GAIN2
IC602
WE
IC202
(SEE PAGE 3-13)
HA 0-5, 17-19 CS 3
S725D
16M NAND-F
146-154
4K EEPROM
X3VRST
AUDIO 2 :S525D
WE, OE, CE
HD 0-15
HA 1-20
IC201
14 97
SC1
SO1
SI1
SI0
SC0
HD 8-15
D 16-31
(SEE PAGE 3-4)
A 01-15
RF, SERVO
76 77 78 79 80 89
25-39 41
SO0
42 44-64
HD 0-15
CS0L
SC1
SI1
SO1
SC0
SIO
SO0
4
HA 0, 1
+3.3V
IC207
HA 0-5, 17-19
HD 0-15
XFRRST
(SEE PAGE 3-5)
HD 0-15
HA 0-21
HA 0-21
SIGNAL PROCESS
WE, RY/BY, OE, CE
IC205 16M FLASH
CS, WE, OE, UB, LB
IC206 16M FLASH
HA 1-16
IC204 1M SRAM
HD 0-7
(SEE PAGE 4-31,33,35)
DVP-S325/S525D/S725D 3-6. AUDIO (1) BLOCK DIAGRAM MB-82/85 BOARD(5/7) (SEE PAGE 4-35,37)
S325 R502
SPDIF1
SPDIF
R536
BCK
R538
LRCK
R529
ACH12 S525D/S725D
IC902 AUDIO 2CH DAC
DO 16
SIGNAL PROCESS BCKO 9
3 BCLKIN
V OUT L 16
AUDIOLT
LRCKO 10
1 LRCIN
V OUT R 13
AUDIORT
52 CH12I
CH78O 11
2 D IN
ACH34
51 CH34I
CH12O 15
ACH56
50 CH56I
CH34O 14
SC1
CH56O 12
CS0
CDDOUT
25 CDDOBYP
CDDATA
26 CDSOBYP
CDBCK
27 CDBKCKI
CDLRCK
28 CDLRCKI
X01INT0
55 CPU INT0
IC501 AUDIO DSP
SO1
26 MD 27 MC 28 ML
ZERO 21
ZFLT
ZEROR 17
ZFRT
XTI
49 LRCKI
RSTB
47 BCKI
(SEE PAGE 3-6)
22 5
S525D/S725D IC905 FRONT L/R DAC
56 CPU INT1
3 BCLKIN
V OUT L 16
AUDIOL
61 SI
1 LRCIN
V OUT R 13
AUDIOR
CH12O
62 CS 63 SO 66 SCK
SC1 RST
SC1
CLK
SI1
2 D IN SO1
ACKI
X01CS
CS1
26 MD 27 MC 28 ML
ZEROR 17
ZFR
SO1
SO1
SC1
SC1
XDACS0
CS0
AUDIO 2 :S325/S525D (SEE PAGE 3-13) AUDIO 3 :S725D (SEE PAGE 3-15)
XDACS1
CS1
3 BCLKIN
V OUT L 16
AUDIOLS
XDACS2
CS2
1 LRCIN
V OUT R 13
AUDIORS
XDACS3
CS3
IC906 REAR L/R DAC
CH34O
2 D IN SC1 CS2
26 MD 27 MC 28 ML
X01RST
ZERO 21
ZFLS
ZEROR 17
ZFRS
XTI
SO1
RSTB
(SEE PAGE 3-9,10)
ZFL
22 5
33 7 68
SYSTEM CONTROL
ZERO 21
XTI
SO1
RSTB
X01INT1
22 5
XDACRST
384FS01
IC907
27M01
CENTER/WOOFER DAC
384FSDA
CH56O
3 BCLKIN
V OUT L 16
AUDIOC
1 LRCIN
V OUT R 13
AUDIOLFE
2 D IN SC1
27 MC 28 ML
CS3
ZEROR 17
ZFC ZFLFE
XTI
26 MD RSTB
SO1
ZERO 21
22 5
05
3-11
3-12
DVP-S325/S525D/S725D 3-7. AUDIO (2) BLOCK DIAGRAM – DVP-S325/S525D – AU-209/212 BOARD(2/2)
MB-82/85 BOARD(6/7) INTERFACE CONTROL
J502
(SEE PAGE 4-45,47,67,69)
(SEE PAGE 4-37)
Q341 BUFFER
COAXIAL DIGITAL OUT
IC505 A MUTE 1 D IN
(SEE PAGE 3-18)
OPTICAL
MA MUTE J506 : S325/S525D: EXCEPT Australian
SYSTEM CONTROL (SEE PAGE 3-9,10)
GAIN2
L
S325 CN005
CN301
SPDIF
15
AUDIOLT
11
AUDIORT
13
ZFLT
10
ZFRT
19 9 7
SPDIF AUDIOLT AUDIORT ZFLT ZFRT A MUTE MA MUTE
AUDIO OUT1
IC431 LPF +6dB
14
R
S525D
18
3
1
16
5
7
J505 : S525D: Australian Q431,432 GAIN CONTROL
L
Q435, 436 MUTE
AUDIO OUT2 R S525D
Q301 19
Q305
10
HP-108/111 BOARD (SEE PAGE 4-102)
IC401 HEAD PHONE AMP
20 22 3
1
5
7
Q401, 402 MUTE IC502
Q314, 315 LEVEL SHIFT AUDIOL
21
AUDIOR
23
ZFL ZFR
20
AUDIOL AUDIOR
27
ZFL ZFR
1
HPR
3
PHONES
3 RV701
J508
LPF +6dB
8
3
1
6
5
7
LEVEL L
Q503, 504 MUTE
AUDIO 1 (SEE PAGE 3-12)
HPL
1
S525D
J701
CN701
CN401
FRONT R
Q306
9
Q307
2
IC541 1 3
AUDIOLS
5
AUDIORS ZFLS
2
ZFRS
13
GAIN2 AUDIOLS AUDIORS ZFLS ZFRS
LPF +12dB
13 3
11
1
L
Q543, 544 MUTE 5
9
REAR
7
R
Q311 12
Q308
1
IC571 LPF +12dB, +16dB AUDIOC
7 9
AUDIOLFE
6
ZFC ZFLFE
12 CN007
AUDIOC AUDIOLFE ZFC ZFLFE
3
7
CENTER
1 Q573, 574 MUTE
5
5
WOOFER
7
Q310
8
Q309
2 CN302
Q303, 304 MUTE CONTROL
ER-4 BOARD (2/2) (SEE PAGE 4-73,75)
9
ERAUDIOR
S325/S525D: EXCEPT Australian
7
ERAUDIOL
CN305 05
7
9
CN902
RY904 4 2 7 9
3
3
A (L) OUT
8
6
A (L) IN
1
VIDEO (SEE PAGE 3-7)
Q915 RELAY DRIVE
RELAY DRIVE CONT
RY905 4
3
2
1
A (R) OUT
2
A (R) IN
3
A (L) OUT
6
A (L) IN
CN903 EURO AV2
7
8
9 1
1
A (R) OUT
2
A (R) IN
Q916 RELAY DRIVE
3-13
CN904 EURO AV1 (RGB)-TV
3-14
5.1CH OUTPUT
DVP-S325/S525D/S725D 3-8. AUDIO (3) BLOCK DIAGRAM – DVP-S725D – AU-210/211 BOARD(2/2)
MB-82/85 BOARD(6/7) INTERFACE CONTROL
J301
(SEE PAGE 4-53,55,61,63)
(SEE PAGE 4-37)
Q303 BUFFER
COAXIAL DIGITAL OUT
IC303 A MUTE 1 D IN
(SEE PAGE 3-18)
OPTICAL
MA MUTE J307 :S725D: EXCEPT Australian
SYSTEM CONTROL (SEE PAGE 3-9,10)
L
GAIN2 CN005
CN402
SPDIF
15
AUDIOLT
11
AUDIORT
13
ZFLT
10
ZFRT
19 9 7
SPDIF AUDIOLT AUDIORT ZFLT ZFRT A MUTE MA MUTE
B401 (1/2)
14 18
6
16
4
B403 LT RT
3 1
IC401 GAIN CONTROL
AUDIOR
23
ZFL ZFR
20
AUDIOL AUDIOR
1
2
1
6
7
6
7
27
ZFL ZFR
L
Q410, 411 MUTE
AUDIO OUT2 R J304
Q401
10
HP-109/110 BOARD (SEE PAGE 4-102)
IC411 HEADPHONE AMP
20 22 3
1
5
7
IC404, 408
1
3
6
1
B404 L R
3
LPF +6dB
J701
CN701
CN301 Q418, 419 MUTE
8
AUDIO 1 (SEE PAGE 3-12)
S725D: Australian
2
Q431 19
B401 (2/2) 21
R
LPF +6dB
Q437, 438 LEVEL SHIFT
AUDIOL
AUDIO OUT1
IC403, 407
HPL
1
HPR
PHONES
3
RV701
J303
3
2
1
2
1
1
6
7
6
7
LEVEL L
Q412, 413 MUTE
FRONT R
Q402
9
Q403
2
IC405, 409 1 3
AUDIOLS
5
AUDIORS ZFLS
2
ZFRS
13
GAIN2 AUDIOLS AUDIORS ZFLS ZFRS
B402 (1/2)
13
6
11
4
9
LPF +12dB
B405 LS RS
3
2
1
2
1
L
Q414, 415 MUTE 1
6
7
6
REAR
7
5.1CH OUTPUT
R
Q404 12
Q432
1
IC406, 410 B402 (2/2) AUDIOC
7 9
AUDIOLFE
6
ZFC ZFLFE
12 CN007
AUDIOC AUDIOLFE ZFC ZFLFE
7
3
5
1
LPF +12dB, +16dB
B406 C W
3
2
1
2
CENTER
1 Q416, 417 MUTE
1
6
7
6
WOOFER
7
Q433
8
Q434
2 CN403
Q405, 435 MUTE CONTROL
S725D: EXCEPT Australian
ER-5 BOARD (2/2) (SEE PAGE 4-81,83)
ERAUDIOR
05
9 ERAUDIOL
CN302 7
7
9
CN902
RY904 4 2 7 9
3
3
A (L) OUT
8
6
A (L) IN
1
VIDEO (SEE PAGE 3-7)
Q915 RELAY DRIVE
RELAY DRIVE CONT
RY905 4
3
2
1
A (R) OUT
2
A (R) IN
3
A (L) OUT
6
A (L) IN
CN903 EURO AV2
7
8
9 1 Q916 RELAY DRIVE
3-15
CN904 EURO AV1 (RGB)-TV
3-16
1
A (R) OUT
2
A (R) IN
DVP-S325/S525D/S725D 3-9. INTERFACE CONTROL BLOCK DIAGRAM MB-82/85 BOARD(7/7)
FL-98/99/100/101 BOARD
(SEE PAGE 4-31)
(SEE PAGE 4-93,95)
FR-147/148/ 149/150 BOARD (SEE PAGE 4-99)
CN202 S525D/S725D
IC051 IC201
REMOTE COMMANDER RECEIVER
SW-314/315/ 316/317 BOARD (SEE PAGE 4-99)
OUT
VES
1
IR
4
POWER
6
:S525D
STBY
7
9
4
IR
6
31 L POWER
7
32 L STBY
:S725D
D071 CN099 Q098 LED DRIVE
CN003 3 2
LVES BT25
V OUT 4
10 RESET
ON/STANDBY
3
1
2
2
LVES BT25
1
27 L VES
2
4
SOUT1
71
4
SIN1
72
5
SBUSY1
76
3
SRDY1
78
2
P CHECK
77
15
FRRST
8
1
V MUTE
11
8
A MUTE
12
9
X IN
14
X OUT
15
L JOG
29
L MULTI
30
AN2
IC201!¢
S071
S098
S224
S223
S222
S221
SHUFFLE
PROGRAM
CLEAR
REPEAT
SC0 SI0
6
IFSC0
4
IFSI0
SO0 XIFCS
5
IFSO0
XIFBUSY +3.3V
3
+5V
2 15
XVIFCS
SYSTEM CONTROL (SEE PAGE 3-10)
XIFINT +3.3V
:S725D
BT11
3
3.9Vp-p(4MHz)
S525D/S725D 5
AN1
SEARCH
S217
S216
S215
S214
NEXT
PREV
RETURN
DVD MENU
TITLE
CN203
LEFT, RIGHT, UP, DOWN, ENTER 25 DCS CCW, 26 DCS CW
DCS CCW, DCS CW
PREV
NEXT
JOG
S525D/S725D
S525D/S725D
S230
D204
S212 OPEN/CLOSE
LEFT
4 6 I 9
D203 MULTI CHANNEL
17 JOG CCW, 18 JOG CW
DOWN
ENTER
S213
S325/S525D
JOG CCW, JOG CW
UP
1 2
ENTER
JOG UNIT
S218
S725D
ACS ENTER
6 AN0
PUSH
33 ı 37 41 ı 48 39 40 49 ı 56 58 ı 64
DIG1-13
SEG1-17
31 ı 38 49 ı 53 8 ı 14 19 ı 26 44 45
ND201 VACUUM FLUORECENT DISPLAY
S725D S208
S202
S201
JOG S525D/S725D 05
3-17
V MUTE A MUTE
1
XFRRST
8
V MUTE
9
A MUTE
VIDEO (SEE PAGE 3-7)
AUDIO 2 :S325/S525D (SEE PAGE 3-13) (SEE PAGE 3-15)
X201 4MHz
3 S725D S217, 218
XFRRST
AUDIO 3 :S725D
S525D/S725D
:S525D
RIGHT
VES
6
IC202 POWER-ON RESET
VIRTUAL 3D SURROUND
70
IF CON CN201
CN002
D098
VIRTUAL 3D SURROUND
CN006
SCLK1
3-18
DVP-S325/S525D/S725D 3-10. POWER BLOCK DIAGRAM S725D
1 2
Q101-103 SWITCH
P211
+5V
P311
+3.3V
P611
–12V
P511
4 2 1 6
T901 RCORE TRANS
AC10V
+12V
IC412, Q420, 421 +9V, –9V REG
1 4 CN407
+12V
1
IC415 +5V REG
+5V +3.3V –12V EVER5V
CN404
RY-12 BOARD
+12V
(SEE PAGE 4-104)
+5V
2
EVER5V
4 2
Q422-424 SWITCH
7
EVER5V
IC301 IC302
M+12V
1
A+12V
5
+5V
6 7
+3.3V
1
PCONT
3
+5V
5
–12V
2
EVER5V
EVER5V
AU-210/211 BOARD
CN203
PC102 PHOTO COUPLER
IC303
IC401 IC402 IC403 IC404 IC405 IC406 IC407 IC408 IC409 IC410 IC411 IC413 IC414
1
CN202
PC103, Q131 POWER CONTROL T102
CN401 D401-404 1 ACOUT L, N 3
CN202
CN201
PC101 PHOTO COUPLER
Q181-183 SWITCH
CN201
CN302
(SEE PAGE 4-53,55,61,63) 11 18 10 S325/S525D
+12V
L101, 102 LINE FILTER
+12V
RY101
1 3
EVER5V
T101
7
AU-209/212 BOARD
S725D: EXCEPT Australian
(SEE PAGE 4-45,47,67,69) –12V
+12V
+5V
B301
IC302 –9V REG
6
IC431
IC301 +9V REG
4
CN902
IC401 IC502 IC541 IC571
IC303
2
S325/S525D: EXCEPT Australian/S725D: EXCEPT Australian
+5V
S525D IC321 IC505
18
(SEE PAGE 4-99)
(SEE PAGE 4-93,95)
10 11 EVER5V
CN002
CN201 8
ND201
IC201
9
Q201 –30V REG
10 5
F1 F2
9
VEE
+3.3V Q001, 002 T001 DC-DC CONVERTER
8
CN001 5
EVER5V
1
+3.3V
EVER5V
2
+12V
+12V
ER-4/5 BOARD
+5V EVER5V
(SEE PAGE 4-73,81)
S325/S525D: EXCEPT Australian
TK-51/54 BOARD
+3.3V 1
(SEE PAGE 4-13)
CN001 +5V
12
PCONT
5 6 7
CN002 +5V +3.3V
9 IC203 IC702 IC803
IC302 +3.3 REG IC303
IC401
EVER5V
V3.3V
SW-314/315/ 316/317 BOARD
A+12V
1
A+12V
IC904 A+5V A+5V REG
IC201 IC202 IC204 IC207 IC304 IC402 IC403 IC601 IC701
IC502 IC602
IC501 S525D/S725D
IC001
(SEE PAGE 4-99)
IC902
CN099 EVER5V
IC005 +3.3 REG
IC205 S325/S525D
1 M+12V
S525D/S725D +3.3V
3-19
2
S12V CN006
15
+5V +3.3V
CN001
1
14
10
S725D IC404 +3.3 REG
15
CN003 18
1
CN202
05
EVER5V
18
(SEE PAGE 4-21~39)
EVER5V
CN003
+3.3V
11
+12V
MB-82/85 BOARD
5 IC051
PCONT
EVER5V
–12V
10
IC202
12
7
IC901 IC902 IC903
10
CN305
FR-147/148/149/150 BOARD
FL-98/99/100/101 BOARD
PCONT
1 2
D101
ACOUT L, N
+5V
(SEE PAGE 4-107)
CN101 F101
CN101
CN102
HS-030SH BOARD
IC801 IC802
IC905 IC906 IC907 S525D/S725D
IC003 IC004
IC206 S725D
3-20 E
IC001
VCC (5V)
OPTICAL DEVICE
DVP-S325/S525D/S725D SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary mote is printed in each block.)
For schematic Diagram: • Caution when replacing chip parts. New parts must be attached after removal of chip. Be careful not to heat the minus side of tantalum capacitor, because it is damaged by the heat. • All resistors are in ohms, 1/4 W (Chip resistors : 1/10 W) unless otherwise specified. kΩ : 1000Ω, MΩ : 1000kΩ. • All capacitors are in µF unless otherwise noted. pF : µµF 50V or less are not indicated except for electrolytics and tantalums. • All variable and adjustable resistors have characteristic curve B, unless otherwise noted. • 2 : nonflammable resistor. • 5 : fusible resistor. • C : panel designation. • ¢ : internal component. • C : adjustment for repair. • U : B+ Line. • V : B– Line. • Circled numbers refer to waveforms. • Voltages are dc between measurement point. • Readings are taken with a color-bar signals on DVD reference disc and when playing CD reference disc. • Readings are taken with a digital multimeter (DC 10MΩ). • Voltage variations may be noted due to normal production tolerances.
For printed wiring boards: • X : indicates a lead wire mounted on the component side. • x : indicates a lead wire mounted on the printed side. • ® : Through hole. • b : Pattern from the side which enables seeing. (The other layers’ patterns are not indicated.) Caution: Pattern face side: (Side B) Parts face side: (Side A) •
Parts on the pattern face side seen from the pattern face are indicated. Parts on the parts face side seen from the parts face are indicated.
Abbreviation AUS : Australian
Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. When indicating parts by reference number, please include the board name. •
4-1
Abbreviation AUS : Australian RUS : Russian E12B : Black type in E model E12S : Silver type in E model
DVP-S325/S525D/S725D
4-1. FRAME SCHEMATIC DIAGRAMS FRAME (1) SCHEMATIC DIAGRAM
FRAME (1/3) 4-3
4-4
DVP-S325/S525D/S725D
FRAME (2) SCHEMATIC DIAGRAM – DVP-S325/S525D –
FRAME (2/3) 4-5
4-6
DVP-S325/S525D/S725D
FRAME (3) SCHEMATIC DIAGRAM – DVP-S725D –
FRAME (3/3) 4-7
4-8
DVP-S325/S525D/S725D
There are few cases that the part isn't mounted in this model is printed on this diagram.
4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
TK-51/54 BOARD(SIDE A)
TK-51/54 (RF/SERVO) PRINTED WIRING BOARD – Ref. No.: TK-51/54 board; 2,000 series –
TK-51/54 BOARD (SIDE A)
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
CN001 CN002 CN003 CN004
B-2 C-2 D-2 D-3
D003
B-2
IC001
C-1
Q001 Q002
A-2 D-1
A E C B
B
C MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH) C
E B
D 12
CN003
(12) 05
1
2
RF/SERVO TK-51/54
4-9
4-10
3 TK-51:1-672-677TK-54:1-673-437-
DVP-S325/S525D/S725D • Waveforms 1 IC001 1 (DVD play) 200 mV/DIV 100 ns/DIV
6 IC001 #ª (CD play) 500 mV/DIV 200 ms/DIV
TK-51/54 BOARD(SIDE B)
536 mVp-p 2 IC001 1 (CD play) 500 mV/DIV 500 ns/DIV
880 mVp-p 3 IC001 @ª (DVD play) 200 mV/DIV 500 ms/DIV
592 mVp-p 4 IC001 @ª (CD play) 200 mV/DIV 20 ms/DIV
448 mVp-p 5 IC001 #ª (DVD play) 500 mV/DIV 50 ms/DIV
1.7 Vp-p 7 IC001 $º (DVD play) 100 mV/DIV 50 ms/DIV
180 mVp-p 8 IC001 $º (CD play) 500 mV/DIV 50 ms/DIV
860 mVp-p 9 IC001 %¢ (DVD play) 500 mV/DIV 100 ns/DIV
1.5 Vp-p !º IC001 %¢ (CD play) 500 mV/DIV 500 ns/DIV
12 (12)
05
1.3 Vp-p
TK-51:1-672-677TK-54:1-673-4374-11
1.5 Vp-p
RF/SERVO 4-12
TK-51/54
DVP-S325/S525D/S725D
TK-51/54 (RF/SERVO) SCHEMATIC DIAGRAM – Ref. No.: TK-51/54 board; 2,000 series –
• See page 4-9 for printed wiring board and page 4-12 for waveforms.
Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
RF/SERVO TK-51/54
4-13
4-14
DVP-S325/S525D/S725D
MS-29 (LOADING) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM – Ref. No.: MS-29 board; 3,000 series –
There are few cases that the part isn't mounted in this model is printed on this diagram.
MS-29 BOARD S001 (TRAY SENSOR)
S001 CN001
LOADING MOTOR
(CHUCK SENSOR)
11 1-672-678-
05
(11)
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
LOADING 4-15
4-16
MS-29
DVP-S325/S525D/S725D
MB-82/85 (SIGNAL PROCESS/SERVO) PRINTED WIRING BOARD – Ref. No.: MB-82/85 board; 1,000 series –
MB-82/85 BOARD (SIDE A) CN001 CN002 CN003 CN004 CN005 CN006 CN007 CN010 CN011 CN012
D-2 D-4 D-5 C-1 B-1 C-7 C-1 B-6 D-6 D-6
D801 D802 D803 D804 D805 D807
C-6 C-6 C-6 C-6 C-5 C-5
IC001 IC003 IC004 IC202 IC205 IC206 IC302 IC303 IC401 IC501 IC601 IC701 IC904
A-2 A-3 B-3 A-5 A-6 A-6 D-3 C-4 C-2 A-2 A-4 C-5 A-1
Q801 Q802 Q803
C-5 C-6 C-6
There are few cases that the part isn't mounted in this model is printed on this diagram.
MB-82/85 BOARD(SIDE A)
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
MB-82:1-672-676MB-85:1-672-751-
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
SIGNAL PROCESS/SERVO MB-82/85
4-17
4-18
DVP-S325/S525D/S725D
MB82/85 BOARD(SIDE B) MB-82/85 BOARD (SIDE B) D701 D806
C-2 C-2
IC005 IC201 IC203 IC204 IC207 IC304 IC402 IC403 IC404 IC502 IC602 IC702 IC801 IC802 IC803 IC902 IC905 IC906 IC907
A-6 A-3 A-3 B-2 A-2 C-3 C-5 C-5 D-5 C-6 A-4 B-1 C-2 C-1 C-1 A-6 B-6 B-6 C-6
MB-82:1-672-676MB-85:1-672-751-
SIGNAL PROCESS/SERVO 4-19
4-20
MB-82/85
DVP-S325/S525D/S725D MB-82/85 (AV DECODER) SCHEMATIC DIAGRAM • See page 4-17 for printed wiring board. – Ref. No.: MB-82/85 board; 1,000 series –
AV DECODER MB-82/85 (1/10)
4-21
4-22
DVP-S325/S525D/S725D MB-82/85 (SDRAM) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board. • Waveforms 1 IC401 %¢
720 mVp-p (H) 1 IC401 %¢ (RGB output model)
720 mVp-p (H) 2 IC401 %¶
728 mVp-p (H) 2 IC401 %¶ (RGB output model)
728 mVp-p (H)
3 IC401 %• (RGB output model)
1.0 Vp-p (H) 4 IC401 ^¡
1.1 Vp-p (H) 5 IC401 ^™
816 mVp-p (H) 6 IC401 ^∞
1.2 Vp-p (H)
3 IC401 %•
1.0 Vp-p (H)
SDRAM
4-23
4-24
MB-82/85 (2/10)
DVP-S325/S525D/S725D
MB-82/85 (SERVO DSP) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board.
• Waveforms 1 IC701 ^ª (DVD play) 500 mV/DIV 50 ms/DIV
1.4 Vp-p 2 IC701 ^ª (CD play) 500 mV/DIV 200 mV/DIV
1.7 Vp-p 3 IC701 ^• (DVD play) 100 mV/DIV 5 ms/DIV
180 mVp-p 4 IC701 ^• (CD play) 500 mV/DIV 50 ms/DIV
860 mVp-p
SERVO DSP MB-82/85 (3/10)
4-25
4-26
DVP-S325/S525D/S725D MB-82/85 (DRIVE) SCHEMATIC DIAGRAM • See page 4-17 for printed wiring board. – Ref. No.: MB-82/85 board; 1,000 series –
DRIVE
4-27
4-28
MB-82/85 (4/10)
DVP-S325/S525D/S725D MB-82/85 (ARP) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board.
• Waveforms 1 IC303 !¶ (DVD play) 500 mV/DIV 100 ns/DIV
1.6 Vp-p 2 IC303 !ª (CD play) 500 mV/DIV 200 ns/DIV
1.6 Vp-p
ARP
MB-82/85 (5/10)
4-29
4-30
DVP-S325/S525D/S725D MB-82/85 (SYSTEM CONTROL) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board.
D
V
• Waveforms 1 IC202 (™
2 IC202 5
SYSTEM CONTROL 4-31
2.4 Vp-p (12.5 MHz)
4 Vp-p (25.3 MHz)
4-32
MB-82/85 (6/10)
DVP-S325/S525D/S725D MB-82/85 (HGA) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board.
HGA
MB-82/85 (7/10)
4-33
4-34
DVP-S325/S525D/S725D MB-82/85 (CLOCK GENERATOR, AUDIO DSP, V EQ/NR) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board and page 4-40 for waveforms.
4-36
CLOCK GENERATOR, AUDIO DSP, V EQ/NR 4-35
MB-82/85 (8/10)
DVP-S325/S525D/S725D
MB-82/85 (DAC) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board.
DAC
MB-82/85 (9/10)
4-37
4-38
DVP-S325/S525D/S725D
MB-82/85 (BIAS) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board.
• Waveforms 1 IC004 2, 5, 7
4.2 Vp-p (26.9 MHz) 2 IC003 5, 7
DVD: 6.2 Vp-p (37.0 MHz) CD : 5 Vp-p (33.6 MHz)
6 IC001 !¢ (DVD play)
4.2 Vp-p (25.3 MHz) 7 IC001 !¢ (CD play)
4.7 Vp-p (22.5 MHz)
3 IC001 6
4.2 Vp-p (27.0 MHz) 4 IC001 !™
4.6 Vp-p (33.8 MHz) 5 IC001 !¶
DVD : 5.8 Vp-p (36.5 MHz) CD : 5.1 Vp-p (33.8 MHz)
BIAS
4-39
4-40
MB-82/85 (10/10)
DVP-S325/S525D/S725D
AU-209 (AUDIO, VIDEO BUFFER) PRINTED WIRING BOARD – Ref. No.: AU-209 board; 2,000 series –
There are few cases that the part isn't mounted in this model is printed on this diagram.
– DVP-S325/S525D:EXCEPT AUS – AU-209 BOARD CN301 CN302 CN305 CN401
B-2 B-3 B-6 C-7
D301 D304 D306 D308 D431 D432 D525 D526 D551 D552 D591 D592
A-11 A-5 A-5 B-6 A-8 A-8 A-9 A-8 A-10 A-9 A-11 A-11
IC301 IC302 IC321 IC401 IC431 IC502 IC505 IC541 IC571
C-11 A-11 B-3 A-6 B-7 B-8 A-1 B-9 B-10
Q301 Q303 Q304 Q305 Q306 Q307 Q308 Q309 Q310 Q311 Q314 Q315 Q321 Q322 Q341 Q401 Q402 Q431 Q432 Q435 Q436 Q503 Q504 Q543 Q544 Q573 Q574
B-5 A-11 B-6 C-3 C-9 C-7 C-10 C-10 C-10 C-10 B-2 B-3 B-4 B-4 A-1 A-6 A-6 B-7 B-7 C-6 A-8 B-9 A-8 B-10 A-9 B-11 A-10
AU-209 BOARD DIGITAL OUT OPTICAL
5.1 CH OUTPUT
LINE OUT COAXIAL
AUDIO R
FRONT
VIDEO
REAR
CENTER / WOOFER
S VIDEO OUT
L
1
A
2 3 K
K A
K
A
K
B
1 2 3
C
11 1-672-26405
1
2
3
4
5
6
7
8
9
10
11
(11)
12
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
AUDIO, VIDEO BUFFER 4-43
4-44
AU-209
DVP-S325/S525D/S725D
AU-209 (AUDIO) SCHEMATIC DIAGRAM – Ref. No.: AU-209 board; 2,000 series –
• See page 4-43 for printed wiring board.
– DVP-S325/S525D: EXCEPT AUS –
AUDIO AU-209
4-45
4-46
DVP-S325/S525D/S725D
AU-209 (VIDEO BUFFER) SCHEMATIC DIAGRAM • See page 4-43 for printed wiring board. – Ref. No.: AU-209 board; 2,000 series –
• Waveforms
– DVP-S325/S525D: EXCEPT AUS –
1 IC321 2
1.1 Vp-p (H)
6 IC321 !∞
2.0 Vp-p (H)
2 IC321 4
1.2 Vp-p (H) 3 IC321 7
860 mVp-p (H) 4 IC321 !º
1.8 Vp-p (H) 5 IC321 !£
2.4 Vp-p (H)
VIDEO BUFFER 4-47
4-48
AU-209
DVP-S325/S525D/S725D
AU-210 (AUDIO, VIDEO BUFFER) PRINTED WIRING BOARD – Ref. No.: AU-210 board; 3,000 series –
There are few cases that the part isn't mounted in this model is printed on this diagram.
– DVP-S725D: AUS –
AU-210 BOARD(SIDE
A)
11 1-672-248-
05
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
AUDIO, VIDEO BUFFER AU-210
4-49
4-50
(11)
DVP-S325/S525D/S725D
AU-210 BOARD(SIDE
B)
COMPONENT VIDEO OUT
DIGITAL OUT OPTICAL
AUDIO OUT
VIDEO OUT
COAXIAL
Y
CB/B-Y
CR/R-Y
1
5.1CH OUTPUT FRONT
2
REAR
CENTER/WOOFER
S VIDEO OUT
AU-210 BOARD (SIDE B)
K
K
A
A K
K A
A
A K
KK
K
B
1
27 1 2
7
28 1
13
2
C
4
1
12
11 1-672-24805
1
2
3
4
5
6
7
8
9
10
11
12
(11)
CN301 CN401 CN402 CN403 CN404 CN405 CN407
C-5 C-11 C-2 C-3 C-4 C-4 C-5
D301 D302 D303 D304 D401 D402 D403 D404 D405 D406 D407 D408 D409 D410 D411 D421 D422 D423 D424 D425
A-4 A-4 A-4 A-4 C-11 C-11 C-11 C-11 C-4 B-4 B-4 B-4 B-4 A-11 A-11 B-5 B-5 B-5 B-5 C-4
IC301 IC302 IC303 IC401 IC403 IC404 IC405 IC406 IC407 IC408 IC409 IC410 IC411 IC412 IC415
B-1 B-3 A-1 C-7 B-7 B-8 C-9 C-10 B-7 B-8 B-9 B-10 B-5 B-11 C-5
Q301 Q302 Q303 Q401 Q402 Q403 Q404 Q405 Q410 Q411 Q412 Q413 Q414 Q415 Q416 Q417 Q418 Q419 Q420 Q421 Q422 Q423 Q424 Q431 Q432 Q433 Q434 Q435 Q437 Q438
B-2 B-2 A-1 B-4 B-4 B-4 B-4 B-4 A-7 A-6 A-8 A-8 A-9 A-9 A-10 A-10 B-5 B-5 B-12 B-11 A-11 A-11 A-11 B-4 B-5 B-5 B-5 C-5 C-7 C-8
AUDIO, VIDEO BUFFER 4-51
4-52
AU-210
DVP-S325/S525D/S725D AU-210 (AUDIO) SCHEMATIC DIAGRAM – Ref. No.: AU-210 board; 3,000 series –
• See page 4-49 for printed wiring board.
– DVP-S725D: AUS –
AUDIO
AU-210 (1/2)
4-53
4-54
DVP-S325/S525D/S725D AU-210 (VIDEO BUFFER) SCHEMATIC DIAGRAM – Ref. No.: AU-210 board; 3,000 series –
• See page 4-49 for printed wiring board.
– DVP-S725D: AUS –
• Waveforms 1 IC301 2
1.1 Vp-p (H)
6 IC301 !∞
2.0 Vp-p (H)
2 IC301 4
1.2 Vp-p (H) 3 IC301 7
860 mVp-p (H) 4 IC301 !º
1.8 Vp-p (H) 5 IC301 !£
2.4 Vp-p (H)
VIDEO BUFFER 4-55
4-56
AU-210 (2/2)
DVP-S325/S525D/S725D
AU-211 (AUDIO, VIDEO BUFFER) PRINTED WIRING BOARD – Ref. No.: AU-211 board; 3,000 series – – DVP-S725D: EXCEPT AUS –
There are few cases that the part isn't mounted in this model is printed on this diagram.
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
AUDIO, VIDEO BUFFER AU-211
4-57
4-58
DVP-S325/S525D/S725D
AU-211 BOARD (SIDE B)
K K
K A
K A
1 2
1
27
2
7
1
1
7
17
28
18
13
1
4
2
1
12
4-59
4-60
CN301 CN302 CN401 CN402 CN403 CN404 CN405 CN406 CN407
C-5 B-4 C-11 C-2 C-3 C-4 C-3 B-3 C-5
D301 D303 D401 D402 D403 D404 D405 D406 D407 D408 D409 D410 D411 D421 D422 D423 D424 D425 D426 D427
A-4 A-4 C-11 C-11 C-11 C-11 C-4 B-4 B-4 B-4 B-4 A-11 A-11 B-5 B-5 B-5 B-5 C-4 B-2 B-2
IC301 IC302 IC303 IC401 IC403 IC404 IC405 IC406 IC407 IC408 IC409 IC410 IC411 IC412 IC415
B-1 B-3 A-1 C-7 B-7 C-8 C-9 C-10 B-7 B-8 B-9 B-10 B-5 B-11 C-5
Q301 Q302 Q303 Q401 Q402 Q403 Q404 Q405 Q410 Q411 Q412 Q413 Q414 Q415 Q416 Q417 Q418 Q419 Q420 Q421 Q422 Q423 Q424 Q425 Q426 Q427 Q431 Q432 Q433 Q434 Q435 Q437 Q438 Q439 Q440
B-2 B-2 A-1 B-4 B-4 B-4 B-4 B-4 A-7 A-6 A-8 A-8 A-9 A-9 A-10 A-10 B-5 B-5 B-12 B-11 A-11 A-11 A-11 B-3 B-3 B-3 B-4 B-5 B-5 B-5 C-5 C-7 C-8 B-3 B-3
AUDIO, VIDEO BUFFER AU-211
DVP-S325/S525D/S725D AU-211 (AUDIO) SCHEMATIC DIAGRAM – Ref. No.: AU-211 board; 3,000 series –
• See page 4-57 for printed wiring board.
– DVP-S725D: EXCEPT AUS –
AUDIO
AU-211 (1/2)
4-61
4-62
DVP-S325/S525D/S725D
AU-211 (VIDEO BUFFER) SCHEMATIC DIAGRAM – Ref. No.: AU-211 board; 3,000 series –
• See page 4-57 for printed wiring board.
• Waveforms 1 IC301 2
– DVP-S725D: EXCEPT AUS –
1.1 Vp-p (H)
6 IC301 !∞
2.0 Vp-p (H)
2 IC301 4
1.2 Vp-p (H) 3 IC301 7
860 mVp-p (H) 4 IC301 !º
1.8 Vp-p (H) 5 IC301 !£
2.4 Vp-p (H)
VIDEO BUFFER 4-63
4-64
AU-211 (2/2)
DVP-S325/S525D/S725D AU-212 (AUDIO, VIDEO BUFFER) PRINTED WIRING BOARD – Ref. No.: AU-212 board; 2,000 series – – DVP-S525D: AUS – There are few cases that the part isn't mounted in this model is printed on this diagram.
AU-212 BOARD DIGITAL OUT OPTICAL
COMPONENT VIDEO OUT
LINE OUT COAXIAL
AUDIO R
CB / B-Y
Y
VIDEO
5.1 CH OUTPUT CR / R-Y
FRONT
REAR
CENTER/WOOFER
S VIDEO OUT
L
AU-212 BOARD CN301 CN302 CN303 CN401
B-2 B-3 B-3 C-7
D301 D304 D305 D306 D307 D308 D431 D432 D525 D526 D551 D552 D591 D592
A-11 A-5 A-5 A-5 A-5 B-2 A-8 A-8 A-9 A-8 A-10 A-9 A-11 A-11
IC301 IC302 IC303 IC321 IC401 IC431 IC502 IC505 IC541 IC571
C-11 A-11 B-6 B-3 B-5 B-7 B-8 A-1 B-9 B-10
Q301 Q303 Q304 Q305 Q306 Q307 Q308 Q309 Q310 Q311 Q314 Q315 Q321 Q322 Q341 Q401 Q402 Q431 Q432 Q435 Q436 Q503 Q504 Q543 Q544 Q573 Q574
B-4 A-11 C-2 C-6 C-9 C-7 C-9 C-10 C-10 C-10 B-3 B-3 B-3 B-7 A-1 B-6 B-6 B-7 C-7 C-6 A-8 B-9 A-8 A-10 A-9 B-10 A-10
A
A
K
1
K
2 A K K
K A
K
K
3
A
K
K
K A
B
1 2 3
C
11 1-672-23705
1
2
3
4
5
6
7
8
9
10
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
AUDIO, VIDEO BUFFER AU-212
4-65
4-66
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
11
12
(11)
DVP-S325/S525D/S725D AU-212 (AUDIO) SCHEMATIC DIAGRAM – Ref. No.: AU-212 board; 2,000 series – – DVP-S525D: AUS –
AUDIO
4-67
4-68
AU-212 (1/2)
DVP-S325/S525D/S725D
AU-212 (VIDEO BUFFER) SCHEMATIC DIAGRAM – Ref. No.: AU-212 board; 2,000 series –
• See page 4-65 for printed wiring board.
• Waveforms 1 IC321 2
– DVP-S525D: AUS –
1.1 Vp-p (H) 2 IC321 4
1.2 Vp-p (H) 3 IC321 7
860 mVp-p (H) 4 IC321 !º
1.8 Vp-p (H) 5 IC321 !£
2.4 Vp-p (H)
VIDEO BUFFER AU-212 (2/2)
4-69
4-70
6 IC321 !∞
2.0 Vp-p (H)
DVP-S325/S525D/S725D
ER-4 (EURO AV) PRINTED WIRING BOARD – Ref. No.: ER-4 board; 2,000 series –
There are few cases that the part isn't mounted in this model is printed on this diagram.
– DVP-S325/S525D: EXCEPT AUS – ER-4 BOARD
ER-4 BOARD
EURO AV2
EURO AV1 (RGB) - TV
K
K A
K
K
A
A K
A K
A K
K
A KK
A
A KK
KK
K
A
A
K
K
K
K A
K
1
CN901 CN902 CN903 CN904
C-3 B-6 A-5 A-2
D901 D902 D903 D904 D905 D906 D908 D915 D917 D918 D919 D920 D921 D922 D923 D924 D926 D927 D929 D930
B-5 A-1 B-2 B-3 B-4 B-5 A-4 A-5 A-1 A-2 A-2 A-2 A-2 A-2 A-3 A-3 A-4 A-3 A-1 A-1
IC901 IC902 IC903
C-2 B-2 B-4
Q901 Q902 Q903 Q904 Q905 Q906 Q907 Q908 Q909 Q910 Q912 Q913 Q914 Q915 Q916
C-4 C-4 B-5 C-5 B-5 C-5 C-5 B-5 B-5 B-4 A-1 B-2 B-3 A-4 B-5
2
B 17 18
11
C 05
(11)
1-672-269-
1
2
3
4
5
6
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
4-71
4-72
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
EURO AV ER-4
DVP-S325/S525D/S725D ER-4 (EURO AV1) SCHEMATIC DIAGRAM – Ref. No.: ER-4 board; 2,000 series –
• See page 4-71 for printed wiring board.
– DVP-S325/S525D: EXCEPT AUS –
EURO AV1 ER-4 (1/2)
4-73
4-74
DVP-S325/S525D/S725D ER-4 (EURO AV2) SCHEMATIC DIAGRAM – Ref. No.: ER-4 board; 2,000 series –
• See page 4-71 for printed wiring board.
– DVP-S325/S525D: EXCEPT AUS –
EURO AV1 4-75
4-76
ER-4 (2/2)
DVP-S325/S525D/S725D
ER-5 (EURO AV) PRINTED WIRING BOARD – Ref. No.: ER-5 board; 2,000 series – – DVP-S725D: EXCEPT AUS – There are few cases that the part isn't mounted in this model is printed on this diagram.
ER-5 BOARD(SIDE A)
12 1-672-258-
05
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
EURO AV ER-5
4-77
4-78
(12)
DVP-S325/S525D/S725D
ER-5 BOARD(SIDE B)
EURO AV2
EURO AV1 (RGB) - TV
ER-5 BOARD (SIDE B)
K
K
A
A
A K
KK
A
A K
K
KK
A
A KK
KK
K
A
K
K
A
A
K
K
K
K A
1 2
B 17 18
C 05
7
12
1
(12)
1-672-258-
1
2
3
4
5
6
CN901 CN902 CN903 CN904
C-3 B-6 A-5 A-2
D901 D902 D903 D904 D905 D906 D907 D908 D910 D915 D917 D918 D919 D920 D921 D922 D923 D924 D926 D927 D929 D930
B-4 A-1 B-2 B-3 B-4 B-5 B-4 A-4 B-3 A-5 A-1 A-2 A-2 A-2 A-2 A-2 A-3 A-3 A-4 A-3 A-1 A-1
IC901 IC902 IC903
C-2 B-2 B-4
Q901 Q902 Q903 Q904 Q905 Q906 Q907 Q908 Q909 Q910 Q912 Q913 Q914 Q915 Q916 Q917 Q918
C-4 C-4 C-4 C-5 B-5 C-5 C-5 B-5 B-5 B-4 A-1 B-2 B-3 A-4 B-5 B-3 B-3
EURO AV 4-79
4-80
ER-5
DVP-S325/S525D/S725D ER-5 (EURO AV1) SCHEMATIC DIAGRAM – Ref. No.: ER-5 board; 2,000 series –
• See page 4-77 for printed wiring board.
– DVP-S725D: EXCEPT AUS –
EURO AV1 ER-5 (1/2)
4-81
4-82
ER-5 (EURO AV2) SCHEMATIC DIAGRAM – Ref. No.: ER-5 board; 2,000 series –
DVP-S325/S525D/S725D
• See page 4-77 for printed wiring board.
– DVP-S725D: EXCEPT AUS –
EURO AV2 4-83
4-84
ER-5 (2/2)
DVP-S325/S525D/S725D
FL-98/101 (FUNCTION SWITCH, IF CON) PRINTED WIRING BOARD – Ref. No.: FL-98/101 board; 2,000 series –
There are few cases that the part isn't mounted in this model is printed on this diagram.
– DVP-S325/S525D –
FL-98/101 BOARD FL-98/101 BOARD CN201 CN202 CN203
C-1 C-10 C-12
D202 D203 D204 D206 D207
A-10 C-1 C-13 B-1 B-1
IC201 IC202
B-9 A-10
PROGRAM
CLEAR
TITLE
A
RETURN
DVD MENU
FLUORESCENT INDICATOR TUBE
SHUFFLE
3
1
4
5
REPEAT NEXT
PREV
Q201
B-1
B D204,S208 JOG
9
1
OPEN/CLOSE
D203
C
MULTI CANNEL
17
1
11 FL-98 : 1-672-265FL-101 : 1-672-23805
1
2
3
4
5
6
7
8
9
10
11
12
(11)
13
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
FUNCTION SWITCH, IF CON 4-87
4-88
FL-98/101
DVP-S325/S525D/S725D
FL-99/100 (FUNCTION SWITCH, IF CON) PRINTED WIRING BOARD – Ref. No.: FL-99/100 board; 2,000 series –
There are few cases that the part isn't mounted in this model is printed on this diagram.
– DVP-S725D –
FL-99/100 BOARD(SIDE
A)
05
12 (12) FL-99 : 1-672-249FL-100 : 1-672-254-
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
FUNCTION SWITCH, IF CON FL-99/100
4-89
4-90
DVP-S325/S525D/S725D
FL-99 /100 BOARD
FL-99/100 BOARD(SIDE
B)
PROGRAM
CLEAR
TITLE
A
3
1
4
5
C-1 C-10 C-12
D202 D203 D204 D206 D207
A-10 C-1 C-13 B-1 B-1
IC201 IC202
B-9 A-10
Q201
B-1
RETURN
DVD MENU
FLUORESCENT INDICATOR TUBE
SHUFFLE
CN201 CN202 CN203
REPEAT
SEARCH SEARCH
B D204,S208 JOG
9
1
OPEN/CLOSE
D203
C
MULTI CANNEL
1
17
12 (12)
S230
FL-99 : 1-672-249FL-100 : 1-672-254-
NEXT
PREV PUSH
05
1
2
3
4
5
6
7
8
9
10
11
12
13
FUNCTION SWITCH, IF CON 4-91
4-92
FL-99/100
DVP-S325/S525D/S725D
FL-98/99/100/101 (FUNCTION SWITCH) SCHEMATIC DIAGRAM • See pages 4-87 and 4-89 for printed wiring board. – Ref. No.: FL-98/99/100/101 board; 2,000 series –
FUNCTION SWITCH FL-98/99/100/101 (1/2)
4-93
4-94
DVP-S325/S525D/S725D
FL-98/99/100/101 (IF CON) SCHEMATIC DIAGRAM • See pages 4-87 and 4-89 for printed wiring board. – Ref. No.: FL-98/99/100/101 board; 2,000 series –
• Waveform 1 IC201 !¢
3.9 Vp-p (4 MHz)
IF CON
4-95
4-96
FL-98/99/100/101 (2/2)
DVP-S325/S525D/S725D
SW-314/315/316/317 (SURROUND SWITCH), FR-147/148/149/150 (IR/POWER SWITCH) PRINTED WIRING BOARDS – Ref. No.: SW-314/315/316/317 board and FR-147/148/149/150 board; 4,000 series –
– DVP-S725D –
– DVP-S525D –
There are few cases that the part isn't mounted in this model is printed on this diagram.
SW-315/316 BOARD SW-315/316 BOARD
SW-314/317 BOARD
11
12
12
(11)
(12)
(12)
05
05
SW-315 : 1-672-251SW-316 : 1-672-256-
SW-314 : 1-672-267SW-317 : 1-672-240-
FR-147/150 BOARD
FR-147/150 BOARD
D098,S098 VIRTUAL 3D SURROUND
D098,S098 VES
05
– DVP-S525D –
(SIDE B)
(SIDE A)
CN001 CN002 CN003
B-3 A-5 A-2
D001 D002 D003 D004 D071
A-4 A-4 B-4 A-4 A-1
IC051
A-1
Q001 Q002
A-3 A-3
1 2 3
A
(ON/STANDBY)
11
B
(11)
1
05
2
3
4
FR-147 : 1-672-266FR-150 : 1-672-239-
SW-315 : 1-672-251SW-316 : 1-672-256-
– DVP-S725D –
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
FR-148/149 BOARD(SIDE
A)
12 (12) FR-148 : 1-672-250FR-149 : 1-672-25505
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
FR-148/149 BOARD(SIDE
B)
1 2 3
FR-148/149 BOARD (SIDE B)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
CN001 CN002 CN003
B-3 A-5 A-2
D001 D002 D003 D004 D071
A-4 A-4 B-4 A-4 A-1
IC051
A-1
Q001 Q002
4-97
A-3 A-3
A
(ON/STANDBY)
12
B 05
(12)
1
2
SURROUND SWITCH, IR/POWER SWITCH SW-314/315/316/317, FR-147/148/149/150
4-98
3
4
FR-148 : 1-672-250FR-149 : 1-672-255-
DVP-S325/S525D/S725D
SW-314/315/316/317 (SURROUND SWITCH), FR-147/148/149/150 (IR/POWER SWITCH) SCHEMATIC DIAGRAM – Ref. No.: SW-314/315/316/317 board and FR-147/148/149/150 board; 4,000 series –
– DVP-S525D/S725D –
4-100
SURROUND SWITCH, IR/POWER SWITCH 4-99
SW-314/315/316/317, FR-147/148/149/150
DVP-S325/S525D/S725D
HP-108/109/110/111 (HEADPHONE) PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAM – Ref. No.: HP-108/109/110/111 board; 2,000 series – There are few cases that the part isn't mounted in this model is printed on this diagram.
– DVP-S525D/S725D – – DVP-S525D –
HP-108/111 BOARD
K
K
A
11
K A
(11)
K
HP-108 : 1-672-268HP-111 : 1-672-241-
05
LEVEL PHONES
MIN
MAX
– DVP-S725D –
HP-109/110 BOARD(SIDE
HP-109/110 BOARD(SIDE
A)
B)
K
K A
12
K A
(12)
K
05
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-109 : 1-672-252HP-110 : 1-672-257-
12 (12) HP-109 : 1-672-252HP-110 : 1-672-257-
05
LEVEL PHONES
MIN
MAX
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
HEADPHONE
HP-108/109/110/111
4-101
4-102
DVP-S325/S525D/S725D
RY-12 (RELAY) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM – Ref. No.: RY-12 board; 2,000 series – There are few cases that the part isn't mounted in this model is printed on this diagram.
RY-12 BOARD
– DVP-S725D –
– DVP-S725D –
1
2
3
1
11 05
1-672-888-
Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
(11)
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
4-103
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
RELAY 4-104
RY-12
DVP-S325/S525D/S725D
HS-030SH (SWITCHING REGULATOR) PRINTED WIRING BOARD – Ref. No.: 030SH board; 6,000 series – There are few cases that the part isn't mounted in this model is printed on this diagram. HS-030SH BOARD CN101 CN102 CN201 CN202 CN203
A-3 C-4 A-1 B-1 B-1
D101 D102 D104 D105 D131 D132 D133 D135 D182 D183 D184 D185 D211 D212 D311 D401 D402 D511 D611
C-4 A-3 A-3 A-2 A-2 A-2 A-3 A-3 C-2 C-2 C-2 C-3 B-1 B-2 A-2 C-1 C-1 B-2 B-2
IC301 IC401
A-2 C-1
Q101 Q102 Q103 Q131 Q181 Q182 Q183
B-3 A-3 B-3 A-2 C-2 C-3 C-2
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
SWITCHING REGULATOR HS-030SH
4-105
4-106
DVP-S325/S525D/S725D
HS-030SH (SWITCHING REGULATOR) SCHEMATIC DIAGRAM – Ref. No.: HS-030SH board; 6,000 series –
1
2
3
4
5
HS-030SH BOARD C112 0.047uF 630V
R152 0.22 R133 D131 1k 1SS270A
R131 R135 2.2k 2.7k
314 3.1
C131 + 10uF 50V
+
Q102 2SC3377 SWITCH
D132 1SS270A
0
R112 4.7k
R114 2.2k
R113 680
R301 68
R110 3.9k D105 1SS270A
C115 0.033uF
+ C186 1uF 400V R187 180k 1/2W
!
! C101 0.1µF 250V
AC IN
314 S
R188 180k 1/2W
C182 0.0033uF
R182 330 1/2W
!
CN102 2P
3
GND
4
+12V
B-
5
GND
6
-12V
7
E+5V
8
GND
C313 47uF 35V
+
R211 10 2W
C613 47uF 35V
+ L511 10uH
C512 47uF 35V
D182 RD2.7ESB2 R184 3.3k
R183 2.2k
B-
R304 1.5k
C102 0.1µF 250V
IC301
7
+3.3V
6
+3.3V
5
+5V
4
GND
3
GND
2
M+12V
1
A+12V
MB-82/85 BOARD CN001 (SEE PAGE 4-39)
CN203 6P 1
P-CONT
2
E+5V
3
+5V
4
GND
5
-12V
6
GND
FR-147/148/149/150 BOARD CN001 (SEE PAGE 4-99)
R305 (SHORT)
SHUNT REG R306 1.5k
B+
D183 1SS270A
R185 5.6k
R401 68
R402 1k
PC102 TLP721F
D101 S1WBAO60
!
CN202 7P
!
P511 750mA 60V
AU-209 BOARD B301 :S325/S525D:EXCEPT AUS (SEE PAGE 4-45) AU-210 BOARD CN404 :S725D:AUS (SEE PAGE 4-53) AU-211 BOARD CN404 :S725D:EXCEPT AUS (SEE PAGE 4-61) AU-212 BOARD B301 :S525:AUS (SEE PAGE 4-67)
C401 + 100uF D402 35V RD7.5ESB1
!
IC401
2
C103 330pF 250V
+
D401 11EQS04
SHUNT REG
E
2.5
R189 15k
D185 Q182 RD18 2SC3377 FB2 1.2 SWITCH -0.3
D184 D1N60
+
4
C301 1uF 50V
C185 0.01uF
L182 RS204
L102 ! 18mH
R101 1M 1/2W
L611 39uH
D212 RD24FB2
R303 1k
IC301 AN1431T
C184 0.0047uF
L101 ! 18mH
C311 330uF 35V
B-
! T102
C181 2200pF 1kV 314
448
R181 27k
D
+
!
1.2 S
C611 560uF 35V
R713 1k
Q183 2SK2663 SWITCH
1.6A 250V
B+
! 1.5AP61160V
! 2.0AP31160V
PC103 TLP721F
C
Q181 2SK2663 SWITCH
B+
B-
D511 S2L20U
!
C183 0.0022uF
C213 + 47uF 35V
C511 + 1000uF 25V
PC101 TLP721F
1
+5V
-0.1
R186 (SHORT)
314
B+
D611 D3S4M
R116 220 1/2W
Q131 2SC3377 POWER CONTROL
!
+3.3V
2
D104 2.4V
9.0 D102 RD18FB2
C116 0.01uF 50V
R134 10k
F101
1
3.1
D135 1SS270A D133 RD2.7ESB2
R115 27k
CN101 2P
CN201 8P
L311 10uH
C132 + 1uF 50V
R132 22k
S C117 0.0033uF
B
C211 + 330uF 35V D311 21DQ04
L150 45
314 S
Q101 2SK2333 SWITCH
B+
P211 500mA 60V
B+
C113 47pF 2kV
R104 3.3M 1/2W
!
L211 10uH
B+
8
B+ Q103 2SK2333 SWITCH 314
435
C110 + 56uF 400V
D211 S2L20U
7
B+
A
! T101
6
3.9 IC401 AN1431T
C402 + 1uF 2.5 50V
R403 1.2k
R404 270
R405 1.5k
!
!
C107 330pF 250V
C104 330pF 250V
1 RY-12 BOARD CN101 (SEE PAGE 4-104) 2
Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
05
SWITCHING REGULATOR 4-107
4-108 E
HS-030SH
Pin name
PB5
PB6 PB7
VCC3 CLK
CS5 CS4
CS3 CS2
CS1 CS0
NMI HST
RST GND MD0
MD1 MD2
RDY P81
P82 RD
WR0 WR1
D16-D23 D24-D30
GND D31
A00 VCC5
A01-A21 GND
P66 P67
Pin No.
1
2 3
4 5
6 7
8 9
10 11
12 13
14 15 16
17 18
19 20
5-1 E
21 22
23 24
25-32 33-39
40 41
42 43
44-64 65
66 67
O I
O -
O -
I/O
I/O I/O
O O
I O
I I
I I
I I
I I
O O
O O
O O
O
O O
O
I/O
PLL IC control output “H”: DOUBLE DIAG mode signal input “L”: DIAG
Address bus A1-A21 Ground
Address bus A0 Power supply
Ground Data bus D15 (16 bit), D7 (8 bit)
Data bus D0-D7 (16 bit) Data bus D8-D14 (16 bit), D0-D6 (8 bit)
High byte write enable signal output (16 bit and 8 bit) Low byte write enable signal output (16 bit only)
Test terminal (fixed at “L”) Read enable signal output
Wait signal input Test terminal (fixed at “H”)
Input of mode select 1 (fixed at “0”) Input of mode select 2 (fixed at “0”)
Reset signal input from IF CON Ground Input of mode select 0 (fixed at “1”)
Not used (fixed at “H”) Not used (fixed at “H”)
Chip select signal for external SRAM Chip select signal for external FLASH ROM
Chip select signal for SDRAM and AV DEC Chip select signal for REG and AV DEC
Not used Chip select signal for ARP, SERVO DSP and HGA
Power supply CPU clock out (25 MHz)
VES gain control “H”: VES Rear CH boost control “H”: rear boost
Analog filter gain control
Function
5-1. SYSTEM CONTROL PIN FUNCTION (MB-82/85 BOARD IC202)
100
98 99
96 97
94 95
92 93
90 91
88 89
86 87
84 85
81 82 83
79 80
77 78
75 76
73 74
71 72
69 70
Pin No. 68
PB4
PB2 PB3
PB0 PB1
INT1 INT0
X0 VCC5
GND X1
INT3 SC1
DREQ1 DREQ0
DACK1 DACK0
SI2 SO2 PF7
SI1 SO1
SO0 SC0
AN3 SI0
AN1 AN2
AGND AN0
AVCC AVRH
Pin name EOP0
O
O O
I O
I I
I -
O
I O
I I
O O
I O O
I O
O O
I I
I I
I
-
I/O I
DVD/CD select (“H”: 44.1kHz “L”: 48kHz)
Chip select signal to DAC (Lt and Rt) Chip select signal to DAC (L and R)
Rear panel lime input select (“H”: DISC “L”: EXT) Chip select signal to IF CON
Input of interrupt ARP and SERVO DSP Input of interrupt from AV DEC
Clock input (12.5MHz) Power supply
Ground Clock output (12.5MHz)
Input of interrupt from HGA Serial clock output
Input of DMA-REQ 0 from AV DEC Input of DMA-REQ 1 from AV DEC
Output of DMA-ACK 0 to AV DEC Output of DMA-ACK 1 to AV DEC
Serial bus 2 (for data input) Serial bus 2 (for data output) Reset signal output
Serial bus 1 (for data input) Serial bus 1 (for data output)
Serial data output to IF CON and EEPROM Serial clock output to IF CON and EEPROM
Set of mode 3 (fixed at “H”) Serial data input from IF CON and EEPROM
Set of mode 1 Set of mode 2
Ground Set of mode 0
Power supply Reference power supply (+3.3V)
Function Not used
DVP-S325/S525D/S725D SECTION 5 IC PIN FUNCTION DESCRIPTION
DVP-S325/S525D/S725D SECTION 6 TEST MODE 6-1.
GENERAL DESCRIPTION
### Syscon Diagnosis ### Diag All Check No. 2 Version
The Test Mode allows you to make diagnosis and adjustment easily using the remote commander and monitor TV. The instructions, diagnostic results, etc. are given on the on-screen display (OSD).
6-2.
2-3. ROM Check Sum Check Sum = xxxx
STARTING TEST MODE
Press [TITLE], [CLEAR], [POWER] buttons on the remote commander in this order with the power of main unit in OFF status, and the Test Mode starts, then the menu shown below will be displayed on the TV screen. At the bottom of menu screen, the model name and revision number are displayed. To execute each function, select the desired menu and press its number on the remote commander. To exit from the Test Mode, press the POWER button.
Press NEXT Key to Continue Press PREV Key to Repeat _
For the ROM Check, the check sum calculated by the Syscon is output, and therefore you must compare it with the specified value for confirmation. Following the message, press [NEXT] key to go to the next item, or [PREV] key to repeat the same check again. To quit the diagnosis and return to the Check Menu screen, press [STOP] or [ENTER] key. If an error occurred, the diagnosis is suspended and the error code is displayed as shown below.
Test Mode Menu 0. Syscon Diagnosis 1. Drive Auto Adjustment 2. Drive Manual Operation 3. Mecha Aging 4. Emergency History 5. Version Information 6. Video Level Adjustment Exit: Power Key _ Model : DPX12xxxx Revision: 1.xxxx
6-3.
### Syscon Diagnosis ###
3-3. EEPROM Check Error 03: EEPROM Write/Reed N Address : 00000001 Write Data : 2492 Read Data : 2490 Press NEXT Key to Continue Press PREV Key to Repeat _
SYSCON DIAGNOSIS
The same contents as board detail check by serial interface can be checked from the remote commander. On the Test Mode Menu screen, press [0] key on the remote commander, and the following check menu will be displayed.
0. 1. 2. 3. 4. 5. 6. 7. 8. _
Press [STOP] key to quit the diagnosis, or [PREV] key to repeat the same item where an error occurred, or [NEXT] key to continue the check from the item next to faulty item.
### Syscon Diagnosis ### Check Menu Quit All Version Peripheral Servo Supply AV Decoder Video Audio
Subnemu Selecting 2 and subsequent items calls the submenu screen of each item. For example, if “5. Supply” is selected, the following submenu will be displayed.
0. 1. 2. 3. 4. 5. _
0. Quit Quit the Syscon Diagnosis and return to the Test Mode Menu.
### Syscon Diagnosis ### Check Menu No. 5 Supply Quit All ARP Register Check ARP to RAM Data Bus ARP to RAM Address Bus ARP RAM Check
1. All All items continuous check This menu checks all diagnostic items continuously. Normally, all items are checked successively one after another automatically unless an error is found, but at a certain item that requires judgment through a visual check to the result, the following screen is displayed for the key entry.
0. Quit Quit the submenu and return to the main menu.
1. All All submenu items continuous check This menu checks 2 and subsequent items successively. At the item where visual check is required for judgment or an error occurred, the checking is suspended and the message is output for key entry. Normally, all items are checked successively one after another au-
6-1
tomatically unless an error is found. Selecting 2 and subsequent items executes respective menus and outputs the results. For the contents of each submenu, see “Check Items List”.
(3-4) NAND Flash Check Data clear → write → read, and accord check This check is conducted to the DVP-S725D only. Error 04: Clear error 05: Write error 06: Read data discord 21: Faulty blocks exceed 10 The data clear, write, read, and check are executed to the block 0 of Flash memory (IC602). In case of a faulty block, its address is displayed. An error is output if faulty blocks exceed 10.
General Description of Checking Method
2. Version (2-2) Revision ROM revision number is displayed. Error: Not detected. The revision number defined in the source file of ROM (IC205 or IC206) is displayed with four digits.
4. Servo (4-2) Servo DSP Check Data write → read, and accord check Error 12: Read data discord Data 0x9249, 0x2942, 0x4294 are written to the address 0x602 of RAM in the Servo DSP (IC701), then read and checked.
(2-3) ROM Check Sum Check sum is calculated. Error: Not detected. The 8-bit data are added at addresses 0x000F0000 ~ 0x002EFFFF of ROM (IC205 or IC206) and the result is displayed with 4-digit hexadecimal number. Error is not detected. Compare the result with the specified value.
(4-3) DSP Driver Test Test signal data → DSP Driver Error: Not detected.
(2-4) Model Type Model code is displayed. Error: Not detected. The model code read from EEPROM (IC201) is displayed with 2-digit hexadecimal number.
Caution: Do not conduct this test with a mechanical deck connected. The maximum voltage is applied to the Servo Driver IC (IC801, IC802). If mechanical deck is connected, the motor and optics could be damaged. Disconnect mechanical deck following the output message, then enter specified 4or 5-digit number from the remote commander, and press the [ENTER]. The test is conducted only when the input data accord. Check the output level, then press the [NEXT] to finish the test. This test is skipped if “All” is selected.
Model Type DVP-S325 (EXCEPT Russian)
0
1
DVP-S325 (Russian)
0
2
DVP-S525D (EXCEPT Russian, Australian)
2
3
DVP-S525D (Russian)
2
4
DVP-S525D (Australian)
2
5
4
3
DVP-S725D (EXCEPT Russian, Australian, E12B) DVP-S725D (Russian)
4
4
DVP-S725D (Australian)
4
5
DVP-S725D (E12B)
4
6
Supplement: How to disconnect mechanical deck Disconnect flat cables connected to the CN002 and CN003 of MB-82/85 board. Also, disconnect harness from the CN011.
5. Supply
• Abbreviation E12B : Black type in E model E12S : Silver type in E model
Caution: Do not conduct this check with a mechanical deck connected. An access is made to the stream supply and servo control IC (IC303) and external RAM (IC304) using check data. If mechanical deck is connected, the motor and optics could be damaged. This check is also executed by the “All” menu item.
(2-5) Region Region code is displayed. Error: Not detected. The region code determined from the model code is displayed.
Supplement: How to disconnect mechanical deck Disconnect flat cables connected to the CN002 and CN003 of MB-82/85 board. Also, disconnect harness from the CN011.
3. Peripheral (3-2) Gate Array Check Data write → read, and accord check Error 02: Gate array write/read discord Data 0x00~0xFF are written to the address 0xF of GA (IC601), then read and checked if they accord.
(5-2) ARP Register Check Data write → read, and accord check Error 08: ARP register write, and read data discord Data 0x00 to 0xFF are written to the TMAX register (address 0xC6) in ARP (IC303), then they are read and checked.
(3-3) EEPROM Check Data write → read, and accord check Error 03: EEPROM write/read discord Data 0x9249, 0x2942, 0x4294 are written to addresses 0x00~0xFF of EEPROM (IC201), then read and checked. Before writing, the data are saved, then after checking, they are written to restore the contents of EEPROM.
6-2
6. AV Decoder
(5-3) ARP to RAM Data Bus Data write → read, and accord check Error 09: ARP ←→ RAM data bus error Data 0x0001 to 0x8000 where one bit each is set to 1 are written to the address 0 of RAM (IC304) connected to the ARP (IC303) through the bus, then they are read and checked. In case of discord, written bit pattern and read data are displayed. If data where multiple bits are 1 are read, the bits concerned may touch each other. Further, if data where certain bit is always 1 or 0 regardless of written data, the line could be disconnected or shorted.
(6-2) 1930 RAM Data write → read, and accord check Error 13: AVD RAM read data discord The program code data stored in ROM (IC205 or IC206) are copied to all areas of RAM (IC402, IC403) connected to the AVD (IC401) through the bus, then they are read and checked if they accord. Further, the same test is conducted once again with the data where all bits are inverted between 1 and 0. If discord is detected, faulty address, written data, and read data are displayed following the error code 13, and the test is suspended.
(5-4) ARP to RAM Address Bus Data write → other address read discord check Error 10: ARP → RAM address bus error Caution: Address and data display in case of an error is different from the display of other diagnosis (described later). Before starting the test, all addresses of RAM (IC304) are cleared to 0x0000. First, 0xA55A is written to the address 0x00000, and the address data are read and checked from addresses 0x00001 to 0x80000 while shifting 1 bit each. Next, the data at that address is cleared, and it is written to the address 0x00001, and read and checked in the same manner. This check is repeated up to the address 0x80000 while shifting the address data by 1 bit each. If data other than 0 is read at the addresses except written address, an error is given because all addresses were already cleared to 0. In this check, the error display pattern is different from that of other diagnosis; read data, written address, and read address are displayed in this order. However, the message uses same template, and accordingly exchange Address and Data when reading. The following display, for example,
(6-3) 1930 SP ROM → AVD RAM → Video OUT Error: Not detected. The data including sub picture streams in ROM (IC205 or IC206) are transferred to the RAM (IC402, IC403) in AVD (IC401), and output as video signals from the AVD (IC401). They are output from all video terminals (Composite, Y/C, Component) except EURO AV terminal.
7. Video (7-2) Color Bar AVD color bar command write → Video OUT Error: Not detected. The command is transferred to the AVD, and the color bar signals are output from video terminals. They are output from all video terminals (Composite, Y/C, Component) except EURO AV terminal. (7-3) Composite Out EURO-AV Composite video output check This check is executed only for European models DVPS325/DVP-S525D (except for Australian model)/DVPS725D (except for Australian model). AVD color bar command write → Video (EURO-AV Composite) OUT Error: Not detected. With the Component of video output turned off, the color bar signals are output from the EURO-AV terminal.
### Syscon Diagnosis ###
5-4. ARP to RAM Address Bus Error 10: ARP - RAM Address B Address : 0000A55A Write Data : 00000000 Read Data : 00080000 Press NEXT Key to Continue Press PREV Key to Repeat _
(7-4) Y/C Out EURO-AV Y/C video output check This check is executed only for European models DVPS325/DVP-S525D (except for Australian model)/DVPS725D (except for Australian model). AVD color bar command write → Video (EURO-AV Y/C) OUT Error: Not detected. With the Y/C of video output turned on, the color bar signals are output from the EURO-AV terminal.
shows the data 0xA55A was read from address 0x00080000 though it was written to the address 0x00000000. This implies that these addresses are in the form of shadow. Also, if the read data is not 0xA55A, another error will be present.
(7-5) RGB Out EURO-AV RGB video output check This check is executed only for European models DVPS325/DVP-S525D (except for Australian model)/DVPS725D (except for Australian model). AVD color bar command write → Video (EURO-AV RGB) OUT Error: Not detected. With the RGB of video output turned on, the color bar signals are output from the EURO-AV terminal.
(5-5) ARP RAM Check Data write → read, and accord check Error 11: ARP RAM read data discord The program code data stored in ROM are copied to all areas of RAM (IC304) connected to the ARP (IC303) through the bus, then they are read and checked if they accord. If the detail check was selected initially, the data are written to all areas and read, then the same test is conducted once again with the data where all bits are inverted between 1 and 0. If discord is detected, faulty address, written data, and read data are displayed following the error code 11, and the test is suspended.
6-3
(7-6) Component Out EURO-AV Component video output check This check is executed only for European models DVPS325/DVP-S525D (except for Australian model)/DVPS725D (except for Australian model). AVD color bar command write → Video (EURO-AV Component) OUT Error: Not detected. With the Component of video output turned on, the color bar signals are output from the EURO-AV terminal.
6) AV Decoder (6-2) 1930 RAM (6-3) 1930 SP 7) Video (7-2) Color Bar (7-3) Composite Out (DVP-S325/DVP-S525D (except for Australian model)/DVP-S725D (except for Australian model)) (7-4) Y/C Out (DVP-S325/DVP-S525D (except for Australian model)/DVP-S725D (except for Australian model)) (7-5) RGB Out (DVP-S325/DVP-S525D (except for Australian model)/DVP-S725D (except for Australian model)) (7-6) Component Out (DVP-S325/DVP-S525D (except for Australian model)/DVP-S725D (except for Australian model))
(7-7) Euro AV Through Euro-AV2 input check. This check is executed only for European models DVPS325/DVP-S525 (except for Australian model) /DVPS725D (except for Australian model). Check video and audio signal pass through from Euro-AV2 to Euro-AV1. Error: Not detected.
8) Audio (8-2) ARP → 1930 (8-3) Test Tone Error Codes List 00: Error not detected 01: RAM write/read data discord 02: Gate array NG 03: EEPROM NG 04: Flash memory clear error 05: Flash memory write error 06: Flash memory read data discord 08: ARP register read data discord 09: ARP ←→ RAM data bus error 10: ARP ←→ RAM address bus error 11: ARP RAM read data discord 12: Servo DSP NG 13: 1930 SDRAM NG 14: ARP → 1930 video NG 15: ARP → 1930 audio NG 16: 1910 UCODE download NG 17: System call error (function not supported) 18: System call error (parameter error) 19: System call error (illegal ID number) 20: System call error (time out) 21: NAND Flash faulty blocks exceed 10 90: Error occurred 91: User verification NG 92: Diagnosis cancelled
8. Audio (8-2) ARP → 1930 Error 14 : ARP → 1930 video NG 15 : ARP → 1930 audio NG (8-3) Test Tone A pink noise signal is output from the AVD (IC401) through optical coaxial digital terminal and analog audio terminal. Error: Not detected. For DVP-S330 (2ch models): All channels → 2ch Left → 2ch Right are checked in this order. For DVP-S525D/DVP-S725D (DD models): All channels → 2ch Left → 2ch Right → Front Left → Front Right → Rear Left → Rear Right → Center → Sub Woofer are checked in this order. Caution: Sub Woofer is checked only for low-frequency components, and no sound will be heard unless a proper super woofer is connected. Check Items List 2) Version (2-2) Revision (2-3) ROM Check Sum (2-4) Model Type (2-5) Region 3) Peripheral (3-2) Gate Array Check (3-3) EEPROM Check (3-4) NAND Flash Check (DVP-S725D) 4) Servo (4-2) Servo DSP Check (4-3) DSP Driver Test 5) Supply (5-2) ARP Register Check (5-3) ARP to RAM Data Bus (5-4) ARP to RAM Address Bus (5-5) ARP RAM Check
6-4
6-4.
1. DVD-SL (single layer) Select [1], insert DVD single layer disc, and press [ENTER] key, and the adjustment will be made through the following steps, then adjusted values will be written to the EEPROM.
DRIVE AUTO ADJUSTMENT
On the Test Mode Menu screen, press [1] key on the remote commander, and the drive auto adjustment menu will be displayed.
DVD Single Layer Disc Adjustment Steps 1. SLED TILT Reset 2. Disc Check Memory SL 3. Wait 300 msec 4. Set Disc Type SL 5. LD ON 6. Spdl Start 7. Wait 1 sec 8. Focus Servo ON 0 9. Auto Track Offset Adjust 10. CLVA ON 11. Wait 500 msec 12. Tracking ON 13. Wait 1 sec 14. Sled ON 15. Check CLV Lock 16. Auto LFO Adjust 17. Auto Focus Offset Adjust 18. Auto Tilt Position Adjust 19. Auto Focus Gain Adjust 20. Auto Focus Offset Adjust 21. EQ Boost Adjust 22. Auto LFO Adjust 23. Auto Track Gain Adjust Search Check 24. 32Tj Fwd 25. 32Tj Rev 26. 500Tj Fwd 27. 500Tj Rev
## Drive Auto Adjustment ## Adjustment Menu 0. 1. 2. 3. 4.
ALL DVD-SL CD DVD-DL SACD
Exit: RETURN
Normally, [0] is selected to adjust DVD (single layer), CD, DVD (dual layer), and SACD in this order. But, individual items can be adjusted for the case where adjustment is suspended due to an error. In this mode, the adjustment can be made easily through the operation following the message displayed on the screen. The disc used for adjustment must be the one specified for adjustment. However, for SACD disc, use the player with initial data if the disc is not available. 0. ALL Select [0] and press [ENTER] key, and the servo set data in EEPROM will be initialized. Then, 1. DVD-SL disc, 2. CD disc, 3. DVD-DL disc, and 4. SACD disc are adjusted in this order. Each time one disc was adjusted, it is ejected. Replace it with the specified disc following the message. Though the message to confirm whether discs other than SACD disc are adjusted is not displayed, you can finish the adjustment if pressing the [STOP] button. During adjustment of each disc, the measurement for disc type judgment is made. As automatic adjustment does not judge the disc type unlike conventional models, take care not to insert wrong type discs. Also, do not give a shock during adjustment.
28. All Servo Stop 29. Eep Copy Loop Filter Offset
6-5
2. CD Select [2], insert CD disc, and press [ENTER] key, and the adjustment will be made through the following steps, then adjusted values will be written to the EEPROM.
3. DVD-DL (dual layer) Select [3], insert DVD dual layer disc, and press [ENTER] key, and the adjustment will be made through the following steps, then adjusted values will be written to the EEPROM.
CD Adjustment Steps 1. Sled Tilt Rest 2. Disc Check Memory CD 3. Wait 500 msec 4. Set Disc Type CD 5. LD ON 6. Spdl Start 7. Wait 500 msec 8. Focus Servo ON 0 9. Auto Track Offset Adjust
DVD Dual Layer Disc Adjustment Steps 1. Sled Tilt Reset 2. Disc Check Memory DL 3. Wait 500 msec 4. Set Disc Type DL 5. LD ON 6. Spdl Start 7. Wait 1 sec Layer 1 Adjust 8. Focus Servo ON 1 9. Auto Track Offset Adjust
10. CLVA ON 11. Wait 500 msec 12. Tracking ON 13. (TC Display Start) 14. Wait 1 sec 15. Jitter Display Start 16. Sled ON 17. Check CLV ON 18. Auto LFO Adjust 19. Auto Focus Offset Adjust 20. 21. Auto Focus Gain Adjust 22. Auto Focus Offset Adjust 23. Eq Boost Adjust 24. Auto LFO Adjust 25. Auto Track Gain Adjust Search Check 26. 32Tj Fwd 27. 32Tj Rev 28. 500Tj Fwd 29. 500Tj Rev
10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28.
Clva ON Wait 500 msec Tracking ON Wait 500 msec Sled ON Check CLV Lock Auto Loop Filter Offset Auto Focus Adjust Auto Focus Gain Adjust Auto Focus Offset Adjust Eq Boost Adjust Auto Loop Filter Offset Auto Track Gain Adjust Search Check 32Tj Fwd 32Tj Rev 500Tj Fwd 500Tj Rev Layer 0 Adjust Fj (L1 → L0) Auto Track Offset Adjust L0
30. All Servo Stop 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48.
Clva ON Wait 500 msec Tracking ON Wait 500 msec Sled ON Check CLV Lock Auto Focus Filter Offset Auto Focus Adjust Auto Focus Gain Adjust Auto Focus Offset Adjust Eq Boost Adjust Auto Loop Filter Offset Auto Track Gain Adjust Search Check 32Tj Fwd 32Tj Rev 500Tj fwd 500Tj Rev Layer Jump Check Lj (L0 → L1) Lj (L1 → L0)
49. All Servo Stop
6-6
4. SACD Select [4], insert SACD disc, and press [ENTER] key, and the adjustment will be made through the following steps, then adjusted values will be written to the EEPROM. However, if SACD disc is not available, use the player with initial data, skipping the SACD adjustment. In this case, you can finish the adjustment if pressing the [STOP] button.
6-5.
On the Test Mode Menu screen, select [2], and the manual operation menu will be displayed. For the manual operation, each servo on/off control and adjustment can be executed manually. ## Drive Manual Operation ##
SACD Adjustment Steps 1. Sled Tilt Reset 2. Set Disc Type CD 3. LD ON 4. Spdl Start 5. Wait 500 msec 6. Focus Servo ON 0 7. Auto track Offset Adjust 8. 9. CLVA ON 10. Wait 500 msec 11. Tracking ON 12. Wait 1 sec 13. Sled ON 14. Check CLV ON 15. Auto Focus Offset Adjust 17. 18. Auto Focus Gain Adjust 19. Auto Focus Offset Adjust 20. Eq Boost Adjust 21. Auto LFO Adjust 22. Auto Track Gain Adjust 23. 24. 25. 26.
DRIVE MANUAL OPERATION
1. 2. 3. 4. 5. 6.
Operation Menu Disc type Servo Control Track/Layer Jump Manual Adjustment Auto Adjustment Memory Check
0. Disc Check Memory Exit: Return
In using the manual operation menu, take care of the following points. These commands do not provide protection, thus requiring correct operation. The sector address or time code field is displayed when a disc is loaded. 1. Set correctly the disc type to be used on the Disc Type screen. The disc type must be set after a disc was loaded. The set disc type is cleared when the tray is opened. 2. After power ON, if the Drive Manual Operation was selected, first perform “Reset SLED TILT” by opening 1. Disc Type screen. 3. In case of an alarm, immediately press the [STOP] button to stop the servo operation, and turn the power OFF.
32Tj Fwd 32Tj Rev 500Tj Fwd 500Tj Rev
Basic operation (controllable from front panel or remote commander)
27. All Servo Stop
[POWER] [STOP] [OPEN/CLOSE] [RETURN] [NEXT], [PREV] [1] to [9], [0] Cursor UP/DOWN
6-7
Power OFF Servo stop Stop+Eject/Loading Return to Operation Menu or Test Mode Menu Transition between sub modes of menu Selection of menu items Increase/Decrease in manually adjusted value
0. Disc Check Memory
Disc Type Disc Type Auto Check DVD SL 12 cm DVD DL 12 cm CD 12cm SACD 12 cm DVD SL 8 cm DVD DL 8 cm CD 8 cm SACD 8 cm Reset SLED TILT TC. : : EMG. 00 CD 12 cm 1. 2. 3. 4. 5. 6. 7. 8. 9. 0.
Disc Check
1. SL Disc Check 2. CD Disc Check 3. DL Disc Check
0. Reset SLED TILT
Display when CD 12cm disc was selected On this screen, the mirror time is measured to judge the disc and it is written to the EEPROM. First load DVD SL disc and press [1], next load CD disc and press [2], and finally load DVD DL disc and press [3]. The adjustment must be executed more than once after default data were written. External vibration or shock to the player must not be given. Reference value for DVD is from 10 to 20, and for CD, from 28 to 4F. Check that the value of CD is larger than that of DVD. When those values are beyond a range perform this adjustment again. From this screen, you can go to another mode by pressing [NEXT] or [PREV] key, but you cannot enter this mode from another mode. You can enter this mode from the Operation Menu screen only.
[0] Reset SLED TILT
Reset the Sled and Tilt to initial position.
[1] Disk Type Check
Judge automatically the loaded disc. As the judged result is displayed at the bottom of screen, make sure that it is correct. If Disc Check Memory menu has not been executed after EEPROM default setting, the disc type cannot be judged. In this case, return to the initial menu and make a check for three types of discs (SL, DL, CD).
[2] to [9]
Select the loaded disc. The adjusted value is written to the address of selected disc. No further entry is necessary if [1] was selected.
1. Disc Type 1. 2. 3. 4. 5. 6. 7. 8. 9. 0.
Disc Type Disc Type Auto Check DVD SL 12 cm DVD DL 12 cm CD 12cm SACD 12 cm DVD SL 8 cm DVD DL 8 cm CD 8 cm SACD 8 cm Reset SLED TILT
2. Servo Control 1. 2. 3. 4. 5. 6. 7.
EMG. 00
On this screen, select the disc type. To select the disc type, press the number of the loaded disc. The selected disc type is displayed at the bottom. Selecting [1] automatically selects and displays the disc type. In case of wrong display, retry “Disc Check Memory”. Also, opening the tray causes the set disc type to be cleared. In this case, set the disc type again after loading. In performing manual operation, the disc type must be set. Once the disc type has been selected, the sector address or time code display field will appear as shown below. These values are displayed when PLL is locked.
Servo Control LD Off R.Sled FWD SP Off L.Sled REV Focus Off TRK. Off Sled Off CLVA Off FCS. Srch Off
0. Reset SLED TILT SA. SI. DVD SL 12 cm
EMG. 00
On this screen, the servo on/off control necessary for replay is executed. Normally, turn on each servo from 1 sequentially and when CLVA is turned on, the usual trace mode becomes active. In the trace mode, DVD sector address or CD time code is displayed. This is not displayed where the spindle is not locked. The spindle could run overriding the control if the spindle system is faulty or RF is not present. In such a case, do not operate CLVA.
Disc Type Disc Type Auto Check DVD SL 12 cm DVD DL 12 cm CD 12cm SACD 12 cm DVD SL 8 cm DVD DL 8 cm CD 8 cm SACD 8 cm Reset SLED TILT SA. SI. EMG. 00 DVD SL 12 cm 1. 2. 3. 4. 5. 6. 7. 8. 9. 0.
Display when DVD SL 12cm disc was selected
6-8
[0] Reset SLED TILT
Reset the Sled and Tilt to initial position.
[1] LD
Turn ON/OFF the laser.
[2] SP
Turn ON/OFF the spindle.
[3] Focus
Search the focus and turn on the focus.
[4] TRK
Turn ON/OFF the tracking servo.
[5] Sled
Turn ON/OFF the sled servo.
[6] CLVA
Turn ON/OFF normal servo of spindle servo.
[7] FCS. Srch
Apply same voltage as that of focus search to the focus drive to check the focus drive system.
→ Sled FWD
Move the sled outward. Perform this operation with the tracking servo turned off.
← Sled REV
Move the sled inward. Perform this operation with the tracking servo turned off.
6-6.
MECHA AGING ### Mecha Aging ###
↑ Tilt UP
Move the tilt upward.
↓ Tilt DOWN
Move the tilt downward.
Press OPEN key
Abort: STOP key
On the Test Mode Menu screen, selecting [3] executes the aging of mechanism. First, open the tray and load a disc. Press the [PLAY] key, and the aging will start. When the tray is closed, the disc type and size are judged and displayed. During aging, the repeat cycle is displayed. Aging can be aborted at any time by pressing the [STOP] key. After the operation has stopped, unload the disc and press again the [STOP] key or the [RETURN] key to return to the Test Mode Menu.
6-7.
EMERGENCY HISTORY ### MEG. History ###
Laser Hours
CD DVD
xxxxxxxh xxxxxxxh
1. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
The following menus are normally not used. 2. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3. Track/Layer Jump 4. Manual Adjustment 5. Auto Adjustment
Select: 1 – 9 Scroll: UP/DOWN (1: Last EMG.) Exit: Return
On the Test Mode Menu screen, selecting [4] displays the information such as servo emergency history. The history information from last 1 up to 10 can be scrolled with ↑ key or ↓ key. Also, specific information can be displayed by directly entering that number with ten keys.
The persons who do not know well about these menus should not use them.
6. Memory Check EEPROM DATA CD ID No. 00 SACD Focus Gain xx xx TRK. Gain xx xx Focus Offset xx xx TRK. Offset xx xx L. F. Offset xx xx EQ Boost xx xx Jitter xx xx Mirror Time xx xx _ CLEAR: Default Set
– SL xx xx xx xx xx xx xx xx
DVD L0 xx xx xx xx xx xx xx xx
– L1 xx xx xx xx xx xx xx xx
The upper two lines display the laser ON total hours. Data below minutes are omitted. Clearing History Information Clearing laser hours Press [DISPLAY] and [CLEAR] keys in this order. Both CD and DVD data are cleared. Clearing emergency history Press [TITLE] and [CLEAR] keys in this order. Initializing set up data Press [DVD] and [CLEAR] keys in this order. The data have been initialized when “Set Up Initialized” message is displayed. The EMG. History screen will be restored soon.
This screen displays current servo adjusted data stored in the EEPROM. Though adjusted data can be initialized with the [CLEAR] key, they cannot be restored after initialization. So, before clearing, make a note of the adjusted data. For reference, the drive has been designed so that the gain center value is 20 and offset value is 80. Other values will be in a range of 10 to 80. If extreme value such as 00 or FF is set, adjustment will be faulty. In such a case, check for disc scratch or cable disconnection, then perform adjustment again.
6-9
How to see Emergency History 3
6-8.
1
VERSION INFORMATION
2 ## Version Information ##
1.
IF con.
Ver. x. xxx (xxxx) Group 00
SYScon.
Ver. x. xxx (xxxx) Model xx Region 0x SW1 ?? SW2 ??
2
1: Emergency Code 2: Don't Care These codes are used for verification of software designing. 3: Historical order 1 to 9
Exit: RETURN
Emergency Codes List 10: Communication to IC001 (TK-51/54 board) failed. 11: Each servo for focus, tracking, and spindle is unlocked. 12: Communication to EEPROM, IC201 (MB-82/85 board) failed. 13: Writing of hours meter data to EEPROM, IC201 (MB-82/85 board) failed. 14: Communication to Servo DSP IC701 (MB-82/85 board) failed, or Servo DSP is faulty. 20: Initialization of tilt servo and sled servo failed. They are not placed in the initial position. 21: Tilt servo operation error 22: Syscon made a request to move the tilt servo to wrong position. 23: Sled servo operation error 24: Syscon made a request to move the sled servo to wrong position. 30: Tracking balance adjustment error 31: Tracking gain adjustment error 32: Focus balance adjustment error 33: Focus bias adjustment error 34: Focus gain adjustment error 35: Tilt servo adjustment error 36: RF equalizer adjustment error 37: RF group delay adjustment error 38: Jitter value after adaptive servo operation is too large. 40: Focus servo does not operate. 41: With a dual layer (DL) disc, focus jump failed.50: CLV (spindle) servo does not operate. 51: Spindle does not stop. 60: With a DVD disc, Syscon made a request to seek nonexistent address. 61: With a CD disc, Syscon made a request to seek nonexistent address. 62: With a CD disc, Syscon made a request to seek nonexistent track No. and index No. 63: With a DVD disc, seeking of target address failed. 64: With a CD disc, seeking of target address failed. 65: With a CD disc, seeking of target index failed. 70: With a DVD disc, physical information data could not be read. 71: With a CD disc, TOC data could not be read. 80: Disc type judgment failed. 81: As disc type judgment failed, retry was repeated. 82: As disc type judgment failed, a measurement error occurred. 83: Disc type could not be judged within the specified time. 84: Illegal command code was received from Syscon. 85: Illegal command was received from Syscon.
On the Test Mode Menu screen, selecting [5] displays the ROM version and region code. The parenthesized hexadecimal number in version field is checksum value of ROM.
6-9.
VIDEO LEVEL ADJUSTMENT
On the Test Mode Menu screen, selecting [6] displays color bars for video level adjustment. During display of color bars, OSD disappears but the menu screen will be restored if pressing any key. Measurement point
: LINE OUT VIDEO (75 Ω terminating resistance) Measuring instrument : Oscilloscope Adjustment device : RV401 on MB-82/85 board Specified value : 1.0 ± 0.02 Vpp
6-10 6-10E
1.0 ± 0.02 Vp-p
DVP-S325/S525D/S725D SECTION 7 ELECTRICAL ADJUSTMENT 7-1. POWER SUPPLY ADJUSTMENT
In making adjustment, refer to 7-3. Adjustment Related Parts Arrangement.
1. HS-030SH Board Note: During diagnostic check, the characters and color bars can be seen only with the NTSC monitor. Therefore, for diagnostic check, use the monitor that supports both NTSC and PAL modes. Use the reference disc for PAL for check, and use the reference disc for NTSC for adjustment.
Mode
E-E
Instrument
Digital voltmeter
+5 V Check Test point
CN202 pin 5
Specification
5.0 ± 0.2 Vdc
This section describes procedures and instructions necessary for adjusting electrical circuits in this set.
+3.3 V Check Test point
CN202 pin 7
Instruments required: 1) Color monitor TV 2) Oscilloscope 1 or 2 phenomena, band width over 100 MHz, with delay mode 3) Frequency counter (over 8 digits) 4) Digital voltmeter 5) Standard commander (RMT-D108O/D108P/D109P/D111O/ D111P) 6) DVD reference disc HLX-501 (J-6090-071-A) (dual layer) (NTSC) HLX-503 (J-6090-069-A) (single layer) (NTSC) HLX-504 (J-6090-088-A) (single layer) (NTSC) HLX-505 (J-6090-089-A) (dual layer) (NTSC) HLX-506 (J-6090-077-A) (single layer) (PAL) HLX-507 (J-6090-078-A)(dual layer) (PAL) 7) SACD reference disc HLXA-509 (J-6090-090-A)
Specification
3.3 ± 0.2 Vdc
EVER+5 V Check Test point
CN203 pin 2
Specification
5.0 ± 0.2 Vdc
P_CONT Check Test point
CN203 pin 1
Specification
4V – 5 Vdc
A +12 V Check Test point
CN202 pin 1
Specification
9.5 –0.5 Vdc
+1.5
–12 V Check Test point
CN203 pin 5
Specification
–12.0 ± 1.0 Vdc
M +12 V Check Test point
CN202 pin 2
Specification
12.0 ± 1.0 Vdc
Checking method: 1) Confirm that each voltage satisfies the specification.
7-1
3. Checking Component Video Output B-Y (MB-82/85 BOARD) (DVP-S525D: Australian/S725D) This checks component video output B-Y. If it is incorrect, correct colors will not be displayed when connected to, for instance, projector.
7-2. ADJUSTMENT OF VIDEO SYSTEM 1. Video Level Adjustment (MB-82/85 BOARD) This adjustment is made to satisfy the NTSC standard, and if not adjusted correctly, the brightness will be too large or small. Video level adjustment in test mode
Mode
Video level adjustment in test mode
Signal
Color bars
Signal
Color bars
Test point
LINE OUT (VIDEO) connector (75 Ω terminated)
Test point
COMPONENT VIDEO OUT (B-Y) connector (75 Ω terminated)
Instrument
Oscilloscope
Instrument
Oscilloscope
Adjusting element
RV401
Specification
700 ± 70 mVp-p
Specification
1.0 ± 0.02 Vp-p
Mode
Checking method: 1) Confirm that the B-Y level is 700 ± 70 mVp-p.
Adjusting method: 1) In the test mode initial menu “6” Video Level Adjustment, set so that color bars are generated. 2) Adjust the RV401 to attain 1.0 ± 0.02 Vp-p.
700 ± 70 mVp-p
1.0 ± 0.02 Vp-p
Figure 7-3 4. Checking Component Video Output R-Y (MB-82/85 BOARD) (DVP-S525D: Australian/S725D) This checks component video output R-Y. If it is incorrect, correct colors will not be displayed when connected to, for instance, projector.
Figure 7-1 2. S-terminal Output Check (MB-82/85 BOARD) Check S-terminal video output. If it is incorrect, pictures will not be displayed correctly in spite of connection to the TV with a Sterminal cable. Mode
Mode
Video level adjustment in test mode
Video level adjustment in test mode
Signal
Color bars
Signal
Color bars
Test point
Test point
S VIDEO OUT (S-Y) connector (75 Ω terminated)
COMPONENT VIDEO OUT (R-Y) connector (75 Ω terminated)
Instrument
Oscilloscope
Instrument
Oscilloscope
Specification
700 ± 70 mVp-p
Specification
1.0 ± 0.1 Vp-p Checking method: 1) Confirm that the R-Y level is 700 ± 70 mVp-p.
Checking method: 1) In the test mode initial menu “6” Video Level Adjustment, set so that color bars are generated. 2) Confirm that the S-Y level is 1.0 ± 0.1 Vp-p.
700 ± 70 mVp-p
1.0 ± 0.1 Vp-p
Figure 7-4 Figure 7-2
7-2
5. Checking Component Video Output Y (MB-82/85 BOARD) (DVP-S525D: Australian/S725D) This checks component video output Y. If it is incorrect, correct brightness will not be attained when connected to, for instance, projector. Mode
Video level adjustment in test mode
Signal
Color bars
Test point
COMPONENT VIDEO OUT (Y) connector (75 Ω terminated)
Instrument
Oscilloscope
Specification
1.0 ± 0.1 Vp-p
7. Checking RGB Output G (MB-85 BOARD) (EXCEPT Australian model) This checks RGB output G. If it is incorrect, pictures will not be displayed correctly in spite of connection to the TV with an EURO AV connecting cord.
Mode
Checking method: 1) Confirm that the Y level is 1.0 ± 0.1 Vp-p.
In test mode, Push [0] for Syscon Diagnosis and push [7] for Video and push [5] for RGB out
Signal
Color bars
Test point
EURO AV 1 (RGB)-TV connector pin !¡ (75 Ω terminated)
Instrument
Oscilloscope
Specification
700 ± 70 mVp-p
Checking method: 1) Confirm that the G level is 700 ± 70 mVp-p. 1.0 ± 0.1 Vp-p
700 ± 70 mVp-p
Figure 7-5
Figure 7-7
6. Checking RGB Output R (MB-85 BOARD) (EXCEPT Australian model) This checks RGB output R. If it is incorrect, pictures will not be displayed correctly in spite of connection to the TV with an EURO AV connecting cord.
Mode
In test mode, Push [0] for Syscon Diagnosis and push [7] for Video and push [5] for RGB out
Signal
Color bars
Test point
EURO AV 1 (RGB)-TV connector pin !∞ (75 Ω terminated)
Instrument
Oscilloscope
Specification
700 ± 70 mVp-p
8. Checking RGB Output B (MB-85 BOARD) (EXCEPT Australian model) This checks RGB output B. If it is incorrect, pictures will not be displayed correctly in spite of connection to the TV with an EURO AV connecting cord.
Checking method: 1) Confirm that the R level is 700 ± 70 mVp-p.
Mode
In test mode, Push [0] for Syscon Diagnosis and push [7] for Video and push [5] for RGB out
Signal
Color bars
Test point
EURO AV 1 (RGB)-TV connector pin 7 (75 Ω terminated)
Instrument
Oscilloscope
Specification
700 ± 70 mVp-p
Checking method: 1) Confirm that the B level is 700 ± 70 mVp-p. 700 ± 70 mVp-p
700 ± 70 mVp-p
Figure 7-6
Figure 7-8
7-3
9. Checking S Video Output S-C (MB-82/85 BOARD) This checks whether the S-C satisfies the NTSC Standard. If it is not correct, the colors will be too dark or light. Mode
Video level adjustment in test mode
Signal
Color bars
Test point
S VIDEO OUT (S-C) connector (75 Ω terminated)
Instrument
Oscilloscope
Specification
286 ± 50 mVp-p (NTSC) 300 ± 100 mVp-p (PAL)
Checking method: 1) In the test mode initial menu “6” Video Level Adjustment, set so that color bars are generated. 2) Confirm that the S-C burst is 300 ± 100 mVp-p.
300 ± 100 mVp-p
Figure 7-9
7-4
7-3. ADJUSTMENT RELATED PARTS ARRANGEMENT MB-82/85 BOARD (SIDE A)
CN005 28 27
2
1
RV401 VIDEO LEVEL ADJ
HS-030SH BOARD (SIDE A) 1 6 1 CN203
7 CN202
7-6 E
DVP-S325/S525D/S725D SECTION 8 REPAIR PARTS LIST 8-1.
EXPLODED VIEWS
NOTE: • -XX and -X mean standardized parts, so they may have some difference from the original one. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • Abbreviation E12B : Black type in E model E12S : Silver type in E model
• The mechanical parts with no reference number in the exploded views are not supplied. • Hardware (# mark) list and accessories and packing materials are given in the last of the electrical parts list.
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
8-1-1. CASE ASSEMBLY (S325/S525D)
5 4 4
7 4
8
3 3
2
1
6 Front panel section
Ref. No.
Part No.
Description
1 2 3 4 5
3-975-726-41 3-053-498-01 3-970-608-01 3-710-901-41 3-053-510-01
EMBLEM, DVD COVER (BK), TRAY SUMITITE (B3), +BV SCREW, TAPPING (BLACK) CASE, TOP
6
3-973-973-01 FOOT (S)
Remark
Ref. No. 7 7 7 8
8-1
Part No.
Description
Remark
1-418-320-31 COMMANDER, STANDARD (RMT-D108P) (S525D: EXCEPT Australian) 1-418-320-71 COMMANDER, STANDARD (RMT-D109P) (S325) 1-418-320-81 COMMANDER, STANDARD (RMT-D108O) (S525D: Australian) 3-053-633-01 COVER, BATTERY (for RMT-D108O/D108P/D109P)
8-1-2. CASE ASSEMBLY (S725D)
56 55 57
59 55
60 54 54
61
58
53
52
58
51 #1
Front panel section
Ref. No.
Remark
#1
Part No.
Description
Ref. No.
51 52 52 53 53
3-053-493-01 3-053-492-11 3-053-492-21 3-975-726-31 3-975-726-41
ORNAMENT (M), TRAY ORNAMENT (AL), TRAY (BLACK) ORNAMENT (AL), TRAY (SILVER) EMBLEM, DVD (SILVER) EMBLEM, DVD (BLACK)
57 58 59
54 55 55 56 56
3-970-608-01 3-710-901-41 3-710-901-51 X-3949-707-1 X-3949-708-1
SUMITITE (B3), +BV SCREW, TAPPING (BLACK) SCREW, TAPPING (SILVER) CASE ASSY, TOP (BLACK) CASE ASSY, TOP (SILVER)
60
3-053-984-01 SCREW (+BV/CU) X-3945-872-1 FOOT ASSY 1-418-321-31 COMMANDER, STANDARD (RMT-D111P) (EXCEPT Australian) 1-418-321-81 COMMANDER, STANDARD (RMT-D111O) (Australian) 3-055-539-01 COVER, BATTERY (for RMT-D111O/D111P)
61 61
X-3949-298-1 COVER ASSY, TRAY (SILVER) X-3949-299-1 COVER ASSY, TRAY (BLACK)
59
8-2
Part No.
Description
Remark
8-1-3. FRONT PANEL ASSEMBLY 125
Ref. No.
116
124
not supplied
116
S525D/S725D 116 not supplied
121
116
122 127 119
120
104
105
116
116
123
109
115
128
108
126
116 114 102
101
111 110
115
117 104
105
106
Ref. No. * 122
103 103 104 104 104
3-974-997-31 3-974-997-51 4-942-568-01 4-942-568-61 4-963-404-21
WINDOW, REMOTE CONTROL (BLACK) WINDOW, REMOTE CONTROL (SILVER) EMBLEM (NO.5), SONY (BLACK) (S725D) EMBLEM (NO.5), SONY (SILVER) (S725D) EMBLEM (5-A), SONY (S325/S525D)
* 122
105 106 106 107 107
3-988-030-51 X-3949-309-1 X-3949-311-1 3-053-479-01 3-053-479-21
BUTTON, POWER BUTTON (VES) ASSY (BLACK) BUTTON (VES) ASSY (SILVER) BUTTON (PROG) (BLACK) BUTTON (PROG) (SILVER)
108 108 109 109 110
3-053-517-01 3-053-517-21 3-053-480-01 3-053-480-21 3-053-504-01
BUTTON (OPEN) (BLACK) BUTTON (OPEN) (SILVER) BUTTON (PLAY) (BLACK) BUTTON (PLAY) (SILVER) CUSHION
111 112 112 113 113
4-981-435-11 X-3949-294-1 X-3949-313-1 3-053-482-01 3-053-482-41
RING (DIA. 50), ORNAMENTAL RING ASSY, SHUTTLE (BLACK) RING ASSY, SHUTTLE (SILVER) KNOB (ACS) (BLACK) KNOB (ACS) (SILVER)
* 124
114 114 115 116 117
3-988-016-01 3-988-016-61 1-418-097-11 4-951-620-01 1-771-564-11
STICK, CURSOR (BLACK) STICK, CURSOR (SILVER) ENCODER, ROTARY SCREW (2.6X8), +BVTP SWITCH, TACTILE
127 * 128
118 119 119 120 * 121
3-053-496-31 3-945-284-51 3-945-284-81 2-118-268-01 3-684-436-01
STICK (L), CURSOR KNOB, VOLUME (BLACK) KNOB, VOLUME (SILVER) NUT (M9), HEXAGON PLATE, MOUNT
* 122 * 122
* 123
* 123 * 123
* 124
* 124
* 124 125 126
107 114
116 103
103
111 110
* 128 * 128
108
108
116
* 128
* 128
102 109
109 102
101
101
111
113
110 118
Remark
Part No.
Description
Remark
A-6065-229-A HP-108 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-252-A HP-110 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-257-A HP-109 BOARD, COMPLETE (S725D: Australian) A-6065-234-A HP-111 BOARD, COMPLETE (S525D: Australian) A-6065-230-A SW-314 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-243-A SW-315 BOARD, COMPLETE (S725D: Australian) A-6065-221-A SW-317 BOARD, COMPLETE (S525D: Australian) A-6065-253-A SW-316 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-228-A FR-147 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-241-A FR-148 BOARD, COMPLETE (S725D: Australian) A-6065-218-A FR-150 BOARD, COMPLETE (S525D: Australian) A-6065-251-A FR-149 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-268-A FR-147 BOARD, COMPLETE (S325) 3-054-216-01 PLATE (SL), GROUND 3-053-512-01 PLATE (S), GROUND
S525D
112
104
PANEL ASSY, FRONT (S525D) PANEL ASSY, FRONT (S325) PANEL ASSY, FRONT (BLACK) (S725D) PANEL ASSY, FRONT (SILVER) (S725D) WINDOW (FL)
* 124
103 111 110
Description
X-3949-303-3 X-3949-305-1 X-3949-308-3 X-3949-511-3 3-053-483-01
* 123
S525D/S725D
106 107
Part No.
101 101 101 101 102
S725D
112
S325
8-3
8-4
1-790-167-11 CABLE, FLEXIBLE FLAT (FMF-35) A-6065-227-A FL-98 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-240-A FL-99 BOARD, COMPLETE (S725D: Australian) A-6065-223-A FL-101 BOARD, COMPLETE (S525D: Australian) A-6065-250-A FL-100 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-267-A FL-98 BOARD, COMPLETE (S325)
8-1-4. CHASSIS ASSEMBLY 160 S725D
152 not supplied 152 152
163
Ref. No.
Part No.
* 151
A-6065-231-A MB-85 BOARD, COMPLETE (S525D: EXCEPT Russian, Australian) A-6065-232-A MB-85 BOARD, COMPLETE (S525D: Russian) A-6065-246-A MB-85 BOARD, COMPLETE (S725D: Russian) A-6065-247-A MB-82 BOARD, COMPLETE (S725D: Australian) A-6065-235-A MB-82 BOARD, COMPLETE (S525D: Australian)
* 151
T901 * 151
163 * 151 * 151
164
163
160 163
152
152
* 151
Mechanism deck S525D: Australian
* 151 * 151 * 151
160 163
162
152
S725D: EXCEPT Australian
S725D
161
not supplied
163
163 160
163
156
* 158
(S525D)
not supplied
152 153 154 155
* 157 * 158
163
159 157
* 151
163
not supplied
S725D: Australian
163
152
163
* 158
Description
Remark
Ref. No. * 158 * 158 * 159 160 160 160
A-6065-254-A MB-85 BOARD, COMPLETE (S725D: EXCEPT E, Russian, Australian) A-6065-269-A MB-85 BOARD, COMPLETE (S325: EXCEPT Russian) A-6065-270-A MB-85 BOARD, COMPLETE (S325: Russian) A-6065-324-A MB-85 BOARD, COMPLETE (S725D: E12B) A-6065-387-A MB-85 BOARD, COMPLETE (S725D: E12S) SUMITITE (B3), +BV CABLE, FLEXIBLE FLAT (FMT-25) CABLE, FLEXIBLE FLAT (FMA-7) CABLE, FLEXIBLE FLAT (FMA-8) (S525D/S725D) 1-790-165-11 CABLE, FLEXIBLE FLAT (FMA-9) (S525D/S725D)
169 ! T901
158 163 S325/S525D: EXCEPT Australian
156 155
S725D
S525D/S725D S525D/S725D
168
not supplied
154
B
153
A
167
not supplied
167
152
151 167
166 165
A
156
B
not supplied
EXCEPT Australian
8-5
BUSHING (FBS001), CORD SUMITITE (B3), +BV RY-12 BOARD, COMPLETE (S725D) ER-4 BOARD, COMPLETE (S325/S525D: EXCEPT Australian) A-6065-249-A ER-5 BOARD, COMPLETE (S725D: EXCEPT Australian) 1-790-168-11 CABLE, FLEXIBLE FLAT (FEA-4) (S725D: EXCEPT Australian) 1-790-408-11 CABLE, FLEXIBLE FLAT (FME-4) (S325/S525D: EXCEPT Australian) 3-055-791-01 SUMITITE (B3), (RING), +BV (S725D) 3-970-608-01 SUMITITE (B3), +BV (S325/S525D) 3-055-418-01 COVER, EJECT 3-054-650-01 SPRING, EMC 1-431-175-21 TRANSFORMER, POWER (S725D)
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
not supplied
not supplied
4-966-267-11 3-970-608-51 A-6065-255-A A-6065-226-A
167 167 168
163
157
162 163 * 164 * 165
166
152
Remark
160 160 ! 161 ! 161
166
3-669-610-00 SPACER A-6065-225-A AU-209 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-248-A AU-211 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-261-A AU-210 BOARD, COMPLETE (S725D: Australian)
Description
A-6065-233-A AU-212 BOARD, COMPLETE (S525D: Australian) A-6065-266-A AU-209 BOARD, COMPLETE (S325) 1-468-359-11 POWER BLOCK (HS-030SH) 3-053-507-21 PANEL, REAR (S525D: EXCEPT Australian) 3-053-507-71 PANEL, REAR (S325) X-3949-703-1 PANEL ASSY, REAR (S725D: EXCEPT Australian) X-3949-711-1 PANEL ASSY, REAR (S725D: Australian) 3-053-507-91 PANEL, REAR (S525D: Australian) 1-769-744-91 CORD, POWER (EXCEPT Australian) 1-790-588-11 CORD, POWER (Australian)
* 165
3-970-608-01 1-790-166-11 1-790-163-11 1-790-164-11
Part No.
167 169
8-6
8-1-5. MECHANISM DECK ASSEMBLY 219
220
219
218 219 218 218
217 #3
216
210
211 207 209 205
215
208
204
206 214
#2
203
M001
212
213 222
221
201
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
202 Ref. No.
Part No.
Description
* 201 * 201 202 203 204
A-6065-214-A TK-51 BOARD, COMPLETE (Australian) A-6065-256-A TK-54 BOARD, COMPLETE (EXCEPT Australian) A-6062-120-A LOADING ASSY 3-053-837-01 TRAY 3-053-841-01 PULLEY GEAR
205 206 207 208 209
3-053-840-01 3-053-839-01 4-974-711-01 3-053-842-01 3-053-849-01
210 211
3-053-838-01 CHUCK CAM 3-053-836-01 BASE UNIT HOLDER
CAM DRIVING GEAR TRAY DRIVING GEAR SCREW (2X5) (P TYIGHT), (+) PTTWH BELT SPRING, TENSION
Remark
Ref. No.
Part No.
Description
212 * 213 214 215 216
3-053-835-01 A-6066-012-A 3-053-845-01 3-053-844-01 3-053-848-01
BASE, LOADING MS-29 BOARD, COMPLETE CHUCK PLATE YOKE CHUCK HOLDER
217 218 219 ! 220 221
3-053-846-01 3-053-847-01 4-981-923-01 8-820-081-03 3-053-843-01
YOKE HOLDER INSULATOR SCREW (M), STEP OPTICAL PICK-UP KHM-220AAA/J1RP MOTOR PULLEY
222 M001
8-7
3-055-097-01 SEAL,DUST TRAY 1-541-632-11 MOTOR, DC (LOADING)
Remark
AU-209
AU-212
8-2. ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. • -XX and -X mean standardized parts, so they may have some difference from the original one. • RESISTORS All resistors are in ohms. METAL: Metal-film resistor. METAL OXIDE: Metal oxide-film resistor. F: nonflammable • Not all of the parts for POWER BLOCK (HS030SH) are listed. • Abbreviation E12B : Black type in E model E12S : Silver type in E model Ref. No.
Part No.
*
A-6065-225-A AU-209 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-266-A AU-209 BOARD, COMPLETE (S325) A-6065-233-A AU-212 BOARD, COMPLETE (S525D: Australian) ********************** (Ref. No. 2,000 Series)
* *
Description
Remark
Ref. No.
1-126-926-11 1-163-021-91 1-163-021-91 1-163-239-11 1-163-239-11
ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
1000uF 0.01uF 0.01uF 33PF 33PF
C307 C308 C309
1-163-239-11 CERAMIC CHIP 1-163-251-11 CERAMIC CHIP 1-163-251-11 CERAMIC CHIP
33PF 100PF 100PF
C310 C311
1-163-251-11 CERAMIC CHIP 1-163-251-11 CERAMIC CHIP
100PF 100PF
C312
1-163-239-11 CERAMIC CHIP
33PF
C313
1-163-239-11 CERAMIC CHIP
33PF
C314
1-163-239-11 CERAMIC CHIP
33PF
C315
1-126-935-11 ELECT
470uF
C316
1-104-665-11 ELECT
100uF
C317
1-126-935-11 ELECT
470uF
C318
1-104-665-11 ELECT
100uF
C319
1-126-935-11 ELECT
470uF
C320
1-104-665-11 ELECT
100uF
C321
1-104-665-11 ELECT
100uF
C322 C323 C324 C325 C326
1-104-665-11 1-164-004-11 1-126-935-11 1-126-935-11 1-104-664-11
100uF 0.1uF 470uF 470uF 47uF
ELECT CERAMIC CHIP ELECT ELECT ELECT
Part No.
When indicating parts by reference number, please include the board.
Description
Remark
C327 C328
1-163-021-91 CERAMIC CHIP 1-104-664-11 ELECT
C329
1-163-021-91 CERAMIC CHIP
C343 C344
1-163-259-91 CERAMIC CHIP 1-126-960-11 ELECT
10% 50V 20% 16V (S525D: Australian) 0.01uF 10% 50V (S525D: Australian) 220PF 5% 50V 1uF 20% 50V
C345 C350
1-163-021-91 CERAMIC CHIP 1-163-233-11 CERAMIC CHIP
0.01uF 18PF
C351 C352 C353
1-163-233-11 CERAMIC CHIP 1-163-233-11 CERAMIC CHIP 1-163-233-11 CERAMIC CHIP
18PF 18PF 18PF
5% 50V 5% 50V 5% 50V (S525D: Australian) 5% 50V 5% 50V (S525D: Australian)
C354
1-163-233-11 CERAMIC CHIP
18PF
C355
1-163-233-11 CERAMIC CHIP
18PF
C401
1-104-665-11 ELECT
100uF
C404
1-104-665-11 ELECT
100uF
5% 50V (S525D: Australian) 5% 50V (S525D: Australian) 5% 50V (S525D: Australian) 20% 6.3V (S525D: Australian) 20% 10V (S525D: Australian)
C431
1-104-664-11 ELECT
47uF
C432 C433 C434 C435 C436
1-104-664-11 1-104-665-11 1-163-021-91 1-104-665-11 1-163-131-00
ELECT ELECT CERAMIC CHIP ELECT CERAMIC CHIP
47uF 100uF 0.01uF 100uF 390PF
20% 20% 10% 20% 5%
16V 10V 50V 10V 50V
C437 C438 C439 C440 C442
1-163-021-91 1-163-131-00 1-163-133-00 1-163-021-91 1-163-133-00
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 390PF 470PF 0.01uF 470PF
10% 5% 5% 10% 5%
50V 50V 50V 50V 50V
C443 C447 C448 C449 C450
1-163-021-91 1-136-850-11 1-104-664-11 1-104-664-11 1-136-850-11
CERAMIC CHIP FILM ELECT ELECT FILM
0.01uF 0.1uF 47uF 47uF 0.1uF
10% 5% 20% 20% 5%
50V 63V 16V 16V 63V
C501
1-104-664-11 ELECT
47uF
20%
C502
1-104-664-11 ELECT
47uF
20%
C503
1-163-021-91 CERAMIC CHIP
0.01uF
10%
16V (S525D) 16V (S525D) 50V (S525D)
< CAPACITOR > C302 C303 C304 C305 C306
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
• Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • SEMICONDUCTORS In each case, u: µ, for example: uA. . : µA. . uPA. . : µPA. . uPB. . : µPB. . uPC. . : µPC. . uPD. . : µPD. . • CAPACITORS uF: µF • COILS uH: µH
20% 10% 10% 5% 5%
10V 50V 50V 50V 50V
20% 6.3V (S525D: Australian) 20% 10V (S525D: Australian) 20% 6.3V (S525D: Australian) 20% 10V (S525D: Australian) 20% 10V 20% 10% 20% 20% 20%
10V 25V 6.3V 6.3V 16V
8-8
0.01uF 47uF
10% 50V 5% 50V (S525D: Australian) 5% 50V 5% 50V 5% 50V (S525D: Australian) 5% 50V (S525D: Australian) 5% 50V (S525D: Australian) 20% 10V (S525D) 20% 10V (S525D) 20% 16V
AU-209 Ref. No.
Part No.
Description
Remark
C504
1-163-131-00 CERAMIC CHIP
390PF
5%
C505
1-163-131-00 CERAMIC CHIP
390PF
5%
C506
1-163-021-91 CERAMIC CHIP
0.01uF
10%
C507
1-163-133-00 CERAMIC CHIP
470PF
5%
C508
1-163-133-00 CERAMIC CHIP
470PF
5%
C509
1-136-850-11 FILM
0.1uF
5%
C512
1-136-850-11 FILM
0.1uF
5%
C513
1-104-664-11 ELECT
47uF
20%
C514
1-104-664-11 ELECT
47uF
20%
C521
1-163-251-11 CERAMIC CHIP
100PF
5%
C522
1-163-251-11 CERAMIC CHIP
100PF
5%
C523
1-163-251-11 CERAMIC CHIP
100PF
5%
C524
1-163-251-11 CERAMIC CHIP
100PF
5%
C525
1-163-251-11 CERAMIC CHIP
100PF
5%
C526
1-163-251-11 CERAMIC CHIP
100PF
5%
C541
1-104-664-11 ELECT
47uF
20%
C542
1-104-664-11 ELECT
47uF
20%
C543
1-163-130-00 CERAMIC CHIP
360PF
5%
C544
1-163-275-11 CERAMIC CHIP
0.001uF
5%
C545
1-163-021-91 CERAMIC CHIP
0.01uF
10%
C546
1-163-130-00 CERAMIC CHIP
360PF
5%
C547
1-163-275-11 CERAMIC CHIP
0.001uF
5%
C548
1-163-021-91 CERAMIC CHIP
0.01uF
10%
C549
1-104-664-11 ELECT
47uF
20%
C550
1-104-664-11 ELECT
47uF
20%
C571
1-104-664-11 ELECT
47uF
20%
C572
1-104-664-11 ELECT
47uF
20%
C573
1-163-130-00 CERAMIC CHIP
360PF
5%
C574
1-163-020-00 CERAMIC CHIP
0.0082uF 10%
C575
1-163-021-91 CERAMIC CHIP
0.01uF
C576
1-163-145-00 CERAMIC CHIP
0.0015uF 5%
C577
1-163-275-11 CERAMIC CHIP
0.001uF
10%
5%
Ref. No.
50V (S525D) 50V (S525D) 50V (S525D) 50V (S525D) 50V (S525D) 63V (S525D) 63V (S525D)
Description
Remark
C578
1-163-021-91 CERAMIC CHIP
C579
1-104-664-11
C580
1-104-664-11
C590
1-164-004-11
C591
1-163-233-11
0.01uF
10%
50V (S525D) ELECT 47uF 20% 16V (S525D) ELECT 47uF 20% 16V (S525D) CERAMIC CHIP 0.1uF 10% 25V (S325/S525D: EXCEPT Australian) CERAMIC CHIP 18PF 5% 50V (S325/S525D: EXCEPT Australian) < CONNECTOR >
CN301 CN302 CN303 CN305
16V (S525D) 16V (S525D) 50V (S525D) 50V (S525D) 50V (S525D)
CN401
1-785-698-11 1-785-695-11 1-785-694-11 1-785-697-11
CONNECTOR, FFC/FPC 28P CONNECTOR, FFC/FPC 13P (S525D) CONNECTOR, FFC/FPC 7P(S525D: Australian) CONNECTOR, FFC/FPC 18P (S325/S525D: EXCEPT Australian) 1-564-002-11 PIN, CONNECTOR 3P (S525D) < DIODE >
50V (S525D) 50V (S525D) 50V (S525D) 16V (S525D) 16V (S525D) 50V (S525D) 50V (S525D) 50V (S525D) 50V (S525D) 50V (S525D)
Part No.
AU-212
D301 D304 D305 D306 D307
8-719-988-61 8-719-071-15 8-719-071-15 8-719-071-15 8-719-071-15
DIODE DIODE DIODE DIODE DIODE
1SS355TE-17 HZM6.8ZWA1TL HZM6.8ZWA1TL (S525D: Australian) HZM6.8ZWA1TL HZM6.8ZWA1TL (S525D: Australian)
D308 D431 D432 D525 D526
8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61
DIODE DIODE DIODE DIODE DIODE
1SS355TE-17 1SS355TE-17 1SS355TE-17 1SS355TE-17 (S525D) 1SS355TE-17 (S525D)
D551 D552 D591 D592
8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61
DIODE DIODE DIODE DIODE
1SS355TE-17 (S525D) 1SS355TE-17 (S525D) 1SS355TE-17 (S525D) 1SS355TE-17 (S525D)
< EARTH TERMINAL > * ET301 * ET302 * ET303
50V (S525D) 16V (S525D) 16V (S525D) 16V (S525D) 16V (S525D) 50V (S525D) 50V (S525D) 50V (S525D) 50V (S525D) 50V (S525D)
8-9
1-537-738-21 TERMINAL, EARTH 1-537-738-21 TERMINAL, EARTH 1-537-738-21 TERMINAL, EARTH < FERRITE BEAD >
FB305 FB306 FB307 FB308 FB309
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH (S525D: Australian) 0uH 0uH 0uH 0uH (S325/S525D: EXCEPT Australian)
FB310 FB311 FB312 FB313 FB314
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH (S525D: Australian) 0uH
FB315 FB316 FB317 FB318 FB319
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH (S525D: Australian) 0uH 0uH (S525D: Australian) 0uH (S525D: Australian) 0uH (S525D: Australian)
FB320 FB321 FB322 FB323
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE
FB341
1-414-135-11 FERRITE
0uH (S525D: Australian) 0uH 0uH 0uH (S325/S525D: EXCEPT Australian) 0uH
AU-209 Ref. No.
AU-212
Part No.
Description
FB342 FB401 FB402 FB403 FB404
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH (S525D) 0uH (S525D) 0uH (S525D) 0uH (S525D)
Remark
FB405 FB406 FB407 FB408 FB409
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH (S525D) 0uH (S525D) 0uH (S525D) 0uH (S525D) 0uH (S525D)
Ref. No.
< IC > IC301 IC302 IC303 IC321 IC401
8-759-701-58 8-759-982-54 8-759-563-79 8-759-563-79 8-759-909-71
IC IC IC IC IC
NJM78M08FA RC79M09FA BA7660F-E2 (S525D: Australian) BA7660F-E2 BA4558F (S525D)
IC431 IC502 IC505 IC541 IC571
8-759-909-71 8-759-909-71 8-749-921-12 8-759-909-71 8-759-909-71
IC IC IC IC IC
BA4558F BA4558F (S525D) GP1F32T BA4558F (S525D) BA4558F (S525D)
Part No.
Description
JR414 JR415 JR415
1-216-296-91 SHORT 1-216-295-91 SHORT 1-216-296-91 SHORT
JR416 JR417
1-216-296-91 SHORT 1-216-295-91 SHORT
JR418
1-216-295-91 SHORT
JR418 JR419 JR420 JR420
1-216-296-91 1-216-296-91 1-216-295-91 1-216-296-91
JR421
1-216-295-91 SHORT
JR421 JR422 JR423 JR424
1-216-296-91 1-216-296-91 1-216-295-91 1-216-296-91
SHORT SHORT SHORT SHORT
JR425 JR426 JR427 JR427
1-216-295-91 1-216-295-91 1-216-295-91 1-216-296-91
SHORT SHORT SHORT SHORT
JR428
1-216-295-91 SHORT
JR428
1-216-296-91 SHORT
JR429 JR430 JR431 JR432
1-216-296-91 1-216-296-91 1-216-295-91 1-216-295-91
JR433 JR433
1-216-295-91 SHORT 1-216-296-91 SHORT
JR434 JR434
1-216-295-91 SHORT 1-216-296-91 SHORT
JR435
1-216-296-91 SHORT
JR436
1-216-295-91 SHORT
JR437
1-216-295-91 SHORT
JR438
1-216-296-91 SHORT
JR439
1-216-296-91 SHORT
JR446
1-216-295-91 SHORT
JR447
1-216-295-91 SHORT
SHORT SHORT SHORT SHORT
< JACK > J303 J502 J505 J506 J507
J508
1-784-675-21 JACK, PIN 3P (COMPONENT VIDEO OUT) (S525D: Australian) 1-779-382-11 JACK, PIN 1P (COAXIAL) 1-785-535-11 JACK BLOCK, PIN (LINE OUT/S VIDEO OUT) (S525D: Australian) 1-785-537-11 JACK, PIN (3P) (LINE OUT) (S325/S525D: EXCEPT Australian) 1-537-943-11 TERMINAL, S (S VIDEO OUT) (S325/S525D: EXCEPT Australian)
SHORT SHORT SHORT SHORT
1-785-536-11 JACK, PIN (6P) (5.1CH OUTPUT) (S525D) < JUMPER RESISTOR >
JR400 JR401 JR401
1-216-295-91 SHORT 1-216-295-91 SHORT 1-216-296-91 SHORT
0 (S525D: Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian)
JR402 JR402
1-216-295-91 SHORT 1-216-296-91 SHORT
JR403 JR404 JR405 JR406 JR406
1-216-295-91 1-216-295-91 1-216-296-91 1-216-295-91 1-216-296-91
SHORT SHORT SHORT SHORT SHORT
0 0 0 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian)
JR407 JR408 JR409 JR409
1-216-296-91 1-216-295-91 1-216-295-91 1-216-296-91
SHORT SHORT SHORT SHORT
JR410
1-216-296-91 SHORT
0 0 (S525D: Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0
JR411
1-216-295-91 SHORT
JR411 JR412
1-216-296-91 SHORT 1-216-295-91 SHORT
JR412 JR413
1-216-296-91 SHORT 1-216-296-91 SHORT
0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0
8-10
Remark 0 (S525D: Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0 0 (S525D: Australian) 0 0 0 (S525D: Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 0 (S525D: Australian) 0 (S525D: Australian) 0 (S525D: Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian)
< COIL > L301 L302 L303 L304 L305
1-412-953-11 1-412-953-11 1-412-953-11 1-412-953-11 1-412-953-11
INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR
L306 L307 L321
1-412-953-11 INDUCTOR 1-412-963-11 INDUCTOR 1-412-963-11 INDUCTOR
15uH 15uH 15uH 15uH (S525D: Australian) 15uH (S525D: Australian) 15uH (S525D: Australian) 100uH (S525D: Australian) 100uH
AU-209 Ref. No.
Part No.
Description
Remark
Ref. No.
< TRANSISTOR >
R310 R311
Q301 Q303 Q304 Q305 Q306
8-729-424-08 8-729-216-22 8-729-421-19 8-729-424-08 8-729-424-08
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2111 2SA1162 UN2213 UN2111 UN2111 (S525D)
Q307 Q308 Q309 Q310 Q311
8-729-424-08 8-729-424-08 8-729-424-08 8-729-424-08 8-729-424-08
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2111 (S525D) UN2111 (S525D) UN2111 (S525D) UN2111 (S525D) UN2111 (S525D)
Q314 Q315 Q321 Q322 Q341
8-729-424-08 8-729-421-19 8-729-421-19 8-729-424-08 8-729-120-28
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2111 (S525D) UN2213 (S525D) UN2213 UN2111 2SC1623-L5L6
Q401
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q402
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q431
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q432
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q435
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q436 Q503
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO 8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q504
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q543
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Part No.
Description
Remark
1-216-042-00 METAL CHIP
510
R312
1-216-042-00 METAL CHIP
510
R313
1-216-097-91 RES, CHIP
100K
R314
1-216-097-91 RES, CHIP
100K
R315
1-216-097-91 RES, CHIP
100K
R316
1-216-097-91 RES, CHIP
100K
R317
1-216-073-00 METAL CHIP
10K
(S525D)
R318 R319
1-216-097-91 RES, CHIP 1-216-097-91 RES, CHIP
100K 100K
(S525D)
R320
1-216-097-91 RES, CHIP
100K
(S525D)
R321
1-216-073-00 METAL CHIP
10K
(S525D)
R322 R323 R324 R325
1-216-073-00 1-216-021-00 1-216-021-00 1-216-021-00
10K 68 68 68
(S525D)
R325
1-216-295-91 SHORT
R326 R327 R328 R330 R333
1-216-021-00 1-216-021-00 1-216-021-00 1-216-073-00 1-216-049-91
R334
R311
AU-212
5% 1/10W (S525D: Australian) 1-216-042-00 METAL CHIP 510 5% 1/10W (S525D: Australian) 1-216-097-91 RES, CHIP 100K 5% 1/10W (S325/S525D: EXCEPT Australian)
METAL CHIP METAL CHIP METAL CHIP METAL CHIP
5% 1/10W (S525D: Australian) 5% 1/10W (S525D) 5% 1/10W (S525D) 5% 1/10W (S525D) 5% 1/10W (S525D) 5% 1/10W (S525D: Australian) 5% 1/10W 5% 1/10W (S525D) 5% 1/10W (S525D) 5% 1/10W 5% 1/10W 5% 1/10W 5% 1/10W 5% 1/10W (S525D: Australian)
0 (S325/S525D: EXCEPT Australian)
(S525D) (S525D) Q544
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO (S525D)
Q573
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q574
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP
68 68 68 10K 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W (S525D)
1-216-097-91 RES, CHIP
100K
5%
R341 R342 R343 R344
1-216-057-00 1-216-063-91 1-216-055-00 1-216-033-00
METAL CHIP RES, CHIP METAL CHIP METAL CHIP
2.2K 3.9K 1.8K 220
5% 5% 5% 5%
1/10W (S525D) 1/10W 1/10W 1/10W 1/10W
R345 R346 R347 R348 R401
1-216-021-00 1-216-025-91 1-216-295-91 1-216-097-91 1-216-085-00
METAL CHIP RES, CHIP SHORT RES, CHIP METAL CHIP
68 100 0 100K 33K
5% 5%
1/10W 1/10W
5% 5%
1/10W 1/10W
R402
1-216-085-00 METAL CHIP
33K
5%
1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
(S525D) (S525D) < RESISTOR > R301
1-216-042-00 METAL CHIP
R302
1-216-042-00
R303 R304
1-216-042-00 1-216-021-00
R304
1-216-042-00
510
5% 1/10W (S525D: Australian) METAL CHIP 510 5% 1/10W (S525D: Australian) METAL CHIP 510 5% 1/10W METAL CHIP 68 5% 1/10W (S525D: Australian) METAL CHIP 510 5% 1/10W (S325/S525D: EXCEPT Australian)
R305
1-216-042-00 METAL CHIP
R403
1-216-085-00 METAL CHIP
33K
5%
R305
1-216-073-00
R404
1-216-085-00 METAL CHIP
33K
5%
R306
1-216-021-00
R405
1-216-085-00 METAL CHIP
33K
5%
R307 R308
1-216-073-00 1-216-021-00
R406
1-216-077-00 METAL CHIP
15K
5%
R407
1-216-077-00 METAL CHIP
15K
5%
R309
1-216-073-00 METAL CHIP
R408
1-216-085-00 METAL CHIP
33K
5%
R309
1-216-097-91 RES, CHIP
R409
1-216-025-91 RES, CHIP
100
5%
510 5% 1/10W (S325/S525D: EXCEPT Australian) METAL CHIP 10K 5% 1/10W (S525D: Australian) METAL CHIP 68 5% 1/10W (S525D: Australian) METAL CHIP 10K 5% 1/10W METAL CHIP 68 5% 1/10W (S525D: Australian) 10K 5% 1/10W (S325/S525D: EXCEPT Australian) 100K 5% 1/10W (S525D: Australian)
8-11
1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
AU-209 Ref. No.
AU-212
Part No.
Description
Remark
Ref. No.
R410
1-216-025-91 RES, CHIP
100
5%
1/10W (S525D) 1/10W (S525D)
R411
1-216-049-91 RES, CHIP
1K
5%
R412
1-216-049-91 RES, CHIP
1K
5%
R431 R432 R433 R434
1-216-109-00 1-216-069-00 1-216-069-00 1-216-109-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP
330K 6.8K 6.8K 330K
5% 5% 5% 5%
1/10W (S525D) 1/10W 1/10W 1/10W 1/10W
R435 R436 R439 R440 R441
1-216-069-00 1-216-069-00 1-216-069-00 1-216-295-91 1-216-069-00
METAL CHIP METAL CHIP METAL CHIP SHORT METAL CHIP
6.8K 6.8K 6.8K 0 (S525D) 6.8K
5% 5% 5%
1/10W 1/10W 1/10W
5%
1/10W
R443 R444 R445
1-216-057-00 METAL CHIP 1-216-057-00 METAL CHIP 1-216-049-91 RES, CHIP
2.2K 2.2K 1K
5% 5% 5%
R446
1-216-047-91 RES, CHIP
820
5%
R447
1-216-049-91 RES, CHIP
1K
5%
1/10W 1/10W 1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
R448
1-216-047-91 RES, CHIP
820
5%
R449 R450 R451 R452
1-216-109-00 1-216-109-00 1-216-041-00 1-216-041-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP
330K 330K 470 470
5% 5% 5% 5%
R455 R456 R457 R458 R459
1-216-097-91 1-216-049-91 1-216-049-91 1-216-041-00 1-216-041-00
RES, CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
100K 1K 1K 470 470
1/10W (S525D) 1/10W 1/10W 1/10W 1/10W
5% 1/10W 5% 1/10W 5% 1/10W 5% 1/10W 5% 1/10W (S525D: Australian)
1K 5% 1/10W (S325/S525D: EXCEPT Australian) METAL CHIP 470 5% 1/10W METAL CHIP 470 5% 1/10W (S525D: Australian) RES, CHIP 1K 5% 1/10W (S325/S525D: EXCEPT Australian) METAL CHIP 330K 5% 1/10W (S525D)
Part No.
Description
Remark
R522
1-216-109-00 METAL CHIP
330K
5%
R523
1-216-041-00 METAL CHIP
470
5%
R524
1-216-041-00 METAL CHIP
470
5%
R525
1-216-049-91 RES, CHIP
1K
5%
R526
1-216-025-91 RES, CHIP
100
5%
R527
1-216-025-91 RES, CHIP
100
5%
R528
1-216-049-91 RES, CHIP
1K
5%
R541
1-216-109-00 METAL CHIP
330K
5%
R542
1-216-069-00 METAL CHIP
6.8K
5%
R543
1-216-109-00 METAL CHIP
330K
5%
R544
1-216-069-00 METAL CHIP
6.8K
5%
R545
1-216-069-00 METAL CHIP
6.8K
5%
R546
1-216-069-00 METAL CHIP
6.8K
5%
R547
1-216-069-00 METAL CHIP
6.8K
5%
R548
1-216-069-00 METAL CHIP
6.8K
5%
R549
1-216-057-00 METAL CHIP
2.2K
5%
R553
1-216-057-00 METAL CHIP
2.2K
5%
R555
1-216-109-00 METAL CHIP
330K
5%
R556
1-216-109-00 METAL CHIP
330K
5%
R459
1-216-049-91 RES, CHIP
R557
1-216-041-00 METAL CHIP
470
5%
R460 R461
1-216-041-00 1-216-041-00
R558
1-216-041-00 METAL CHIP
470
5%
R461
1-216-049-91
R559
1-216-049-91 RES, CHIP
1K
5%
R501
1-216-109-00
R560
1-216-025-91 RES, CHIP
100
5%
R561
1-216-025-91 RES, CHIP
100
5%
R502
1-216-069-00 METAL CHIP
6.8K
5%
R562
1-216-049-91 RES, CHIP
1K
5%
R503
1-216-109-00 METAL CHIP
330K
5%
R504
1-216-069-00 METAL CHIP
6.8K
5%
R510
1-216-069-00 METAL CHIP
6.8K
5%
R564 R569 R571
1-216-295-91 SHORT 1-216-295-91 SHORT 1-216-109-00 METAL CHIP
0 (S525D) 0 (S525D) 330K 5%
R511
1-216-069-00 METAL CHIP
6.8K
5%
R572
1-216-109-00 METAL CHIP
330K
5%
R573
1-216-069-00 METAL CHIP
6.8K
5%
R513
1-216-069-00 METAL CHIP
6.8K
5%
R517
1-216-057-00 METAL CHIP
2.2K
5%
R574
1-216-077-00 METAL CHIP
15K
5%
R519
1-216-057-00 METAL CHIP
2.2K
5%
R575
1-216-069-00 METAL CHIP
6.8K
5%
R520
1-216-069-00 METAL CHIP
6.8K
5%
R576
1-216-077-00 METAL CHIP
15K
5%
R521
1-216-109-00 METAL CHIP
330K
5%
R577
1-216-057-00 METAL CHIP
2.2K
5%
1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
8-12
1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
AU-209 Ref. No.
Part No.
Description
Remark
Ref. No.
AU-211
Part No.
Description
1-104-664-11 1-164-004-11 1-126-967-11 1-164-346-11 1-164-346-11
ELECT CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP
47uF 0.1uF 47uF 1uF 1uF
C363 C364 C365 C366 C367
1-164-346-11 1-164-346-11 1-164-346-11 1-164-346-11 1-164-346-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
1uF 1uF 1uF 1uF 1uF
C368 C401 C402 C403 C404
1-164-346-11 1-163-021-91 1-126-926-11 1-128-204-11 1-128-204-11
CERAMIC CHIP CERAMIC CHIP ELECT ELECT ELECT
1uF 0.01uF 1000uF 470uF 470uF
10% 20% 20% 20%
16V 50V 10V 63V 63V
C405 C406 C407 C408 C409
1-163-239-11 1-163-239-11 1-163-239-11 1-163-239-11 1-163-239-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
33PF 33PF 33PF 33PF 33PF
5% 5% 5% 5% 5%
50V 50V 50V 50V 50V
C410 C411 C412 C413 C414
1-163-239-11 1-119-828-31 1-119-828-31 1-126-967-11 1-126-967-11
CERAMIC CHIP ELECT ELECT ELECT ELECT
33PF 100uF 100uF 47uF 47uF
5% 20% 20% 20% 20%
50V 50V 50V 25V 25V
C415 C416 C417 C418 C419
1-126-967-11 1-126-967-11 1-126-967-11 1-126-967-11 1-136-811-11
ELECT ELECT ELECT ELECT FILM
47uF 47uF 47uF 47uF 330PF
20% 20% 20% 20% 5%
25V 25V 25V 25V 100V
C420 C421 C422 C423 C424
1-117-793-11 1-117-793-11 1-106-343-00 1-136-811-11 1-117-793-11
MYLAR MYLAR MYLAR FILM MYLAR
330PF 330PF 1000PF 330PF 330PF
5% 5% 5% 5% 5%
50V 50V 200V 100V 50V
C425 C426 C427 C428 C429
1-117-793-11 1-117-793-11 1-127-713-21 1-130-483-00 1-130-484-00
MYLAR MYLAR FILM MYLAR MYLAR
330PF 330PF 10000PF 0.01uF 0.012uF
5% 5% 5% 5% 5%
50V 50V 50V 50V 50V
C430 C431 C432 C433 C434
1-136-850-11 1-127-713-21 1-113-577-11 1-113-577-11 1-130-483-00
FILM FILM ELECT ELECT MYLAR
0.1uF 10000PF 47uF 47uF 0.01uF
5% 5% 20% 20% 5%
63V 50V 16V 16V 50V
C435
1-136-850-11 FILM
20% 10V 20% 10V 20% 10V 5% 50V (S725D: Australian) 5% 50V (S725D: Australian)
C436
1-136-850-11 FILM
C437 C438
1-130-484-00 MYLAR 1-136-850-11 FILM
C439
1-136-850-11 FILM
20% 6.3V 20% 6.3V 20% 6.3V 5% 50V (S725D: Australian) 5% 50V (S725D: Australian)
C440 C441
1-130-484-00 MYLAR 1-136-850-11 FILM
C442
1-136-850-11 FILM
C443 C444
1-125-853-21 FILM 1-130-467-00 MYLAR
1-216-061-00 METAL CHIP
3.3K
5%
1/10W (S525D)
R579
1-216-069-00 METAL CHIP
6.8K
5%
R580
1-216-079-00 METAL CHIP
18K
5%
R585
1-216-109-00 METAL CHIP
330K
5%
R586
1-216-109-00 METAL CHIP
330K
5%
R587
1-216-041-00 METAL CHIP
470
5%
1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
R588
1-216-041-00 METAL CHIP
470
5%
R589
1-216-049-91 RES, CHIP
1K
5%
R590
1-216-025-91 RES, CHIP
100
5%
R591
1-216-025-91 RES, CHIP
100
5%
R592
1-216-049-91 RES, CHIP
1K
5%
R593 R598
1-216-295-91 SHORT 1-216-295-91 SHORT
0 (S525D) 0 (S525D)
1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
A-6065-261-A AU-210 BOARD, COMPLETE (S725D: Australian) A-6065-248-A AU-211 BOARD, COMPLETE (S725D: EXCEPT Australian) ********************** (Ref. No. 3,000 Series)
*
AU-210
C328 C330 C331 C361 C362
R578
*
AU-212
< CAPACITOR > C302 C303 C304 C305 C306
1-104-665-11 1-104-665-11 1-164-004-11 1-126-935-11 1-126-935-11
ELECT ELECT CERAMIC CHIP ELECT ELECT
100uF 100uF 0.1uF 470uF 470uF
20% 20% 10% 20% 20%
10V 10V 25V 6.3V 6.3V
C307 C309 C310 C311 C312
1-104-664-11 1-164-004-11 1-163-259-91 1-163-259-91 1-163-259-91
ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
47uF 0.1uF 220PF 220PF 220PF
20% 10% 5% 5% 5%
25V 25V 50V 50V 50V
C313 C314 C315 C316 C317
1-163-259-91 1-163-259-91 1-163-259-91 1-126-960-11 1-163-259-91
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP
220PF 220PF 220PF 1uF 220PF
5% 5% 5% 20% 5%
50V 50V 50V 50V 50V
C318 C319 C320 C321
1-104-665-11 1-104-665-11 1-104-665-11 1-163-259-91
ELECT ELECT ELECT CERAMIC CHIP
100uF 100uF 100uF 220PF
C322
1-163-259-91 CERAMIC CHIP
220PF
C323 C324 C325 C326
1-126-935-11 1-126-935-11 1-126-935-11 1-163-259-91
ELECT ELECT ELECT CERAMIC CHIP
470uF 470uF 470uF 220PF
C327
1-163-259-91 CERAMIC CHIP
220PF
8-13
Remark 20% 10% 20%
16V 25V 25V 16V 16V 16V 16V 16V 16V 16V
0.1uF 5% 63V (S725D: EXCEPT Australian) 0.1uF 5% 63V (S725D: EXCEPT Australian) 0.012uF 5% 50V 0.1uF 5% 63V (S725D: EXCEPT Australian) 0.1uF 5% 63V (S725D: EXCEPT Australian) 0.012uF 5% 50V 0.1uF 5% 63V (S725D: EXCEPT Australian) 0.1uF 5% 63V (S725D: EXCEPT Australian) 470PF 5% 50V 470PF 5% 50V
AU-210 Ref. No.
AU-211
Part No.
Description
C445 C446 C447 C448 C449
1-106-343-00 1-130-483-00 1-125-853-21 1-130-467-00 1-106-343-00
MYLAR MYLAR FILM MYLAR MYLAR
1000PF 0.01uF 470PF 470PF 1000PF
5% 5% 5% 5% 5%
200V 50V 50V 50V 200V
Remark
Ref. No.
C450 C451 C452 C453 C454
1-106-343-00 1-119-828-31 1-136-850-11 1-136-850-11 1-119-828-31
MYLAR ELECT FILM FILM ELECT
1000PF 100uF 0.1uF 0.1uF 100uF
5% 20% 5% 5% 20%
200V 50V 63V 63V 50V
C455 C456 C457 C458 C459
1-124-673-11 1-124-673-11 1-124-673-11 1-124-673-11 1-124-673-11
ELECT ELECT ELECT ELECT ELECT
100uF 100uF 100uF 100uF 100uF
20% 20% 20% 20% 20%
10V 10V 10V 10V 10V
C460 C461 C464 C465 C466
1-124-673-11 1-104-665-11 1-104-665-11 1-128-200-11 1-163-009-11
ELECT ELECT ELECT ELECT CERAMIC CHIP
100uF 100uF 100uF 47uF 0.001uF
20% 20% 20% 20% 10%
10V 25V 25V 63V 50V
C467 C468 C469 C470 C471
1-128-200-11 1-136-850-11 1-126-967-11 1-136-850-11 1-136-850-11
ELECT FILM ELECT FILM FILM
47uF 0.1uF 47uF 0.1uF 0.1uF
20% 5% 20% 5% 5%
63V 63V 25V 63V 63V
C472 C473 C474 C475 C478
1-136-850-11 1-164-004-11 1-136-850-11 1-136-850-11 1-104-664-11
FILM CERAMIC CHIP FILM FILM ELECT
0.1uF 5% 63V 0.1uF 10% 25V 0.1uF 5% 63V 0.1uF 5% 63V 47uF 20% 25V (S725D: EXCEPT Australian)
C479
1-163-021-91 CERAMIC CHIP
C480
1-163-021-91 CERAMIC CHIP
C485 C486 C487
1-163-233-11 CERAMIC CHIP 1-163-233-11 CERAMIC CHIP 1-163-233-11 CERAMIC CHIP
0.01uF 10% 50V (S725D: EXCEPT Australian) 0.01uF 10% 50V (S725D: EXCEPT Australian) 18PF 5% 50V 18PF 5% 50V 18PF 5% 50V
C488 C489 C490
1-163-233-11 CERAMIC CHIP 1-163-233-11 CERAMIC CHIP 1-164-004-11 CERAMIC CHIP
* CN401 CN402 CN403 CN404 CN405 CN406 * CN407
Description
D402 D403 D404 D405 D406
8-719-210-21 8-719-210-21 8-719-210-21 8-719-988-61 8-719-988-61
DIODE DIODE DIODE DIODE DIODE
11EQS04 11EQS04 11EQS04 1SS355TE-17 1SS355TE-17
D407 D408 D409 D410 D411
8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61 8-719-115-87
DIODE DIODE DIODE DIODE DIODE
1SS355TE-17 1SS355TE-17 1SS355TE-17 1SS355TE-17 RD9.1JS-T4AB2
D421 D422 D423 D424 D425
8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61
DIODE DIODE DIODE DIODE DIODE
1SS355TE-17 1SS355TE-17 1SS355TE-17 1SS355TE-17 1SS355TE-17
D426
8-719-988-61 DIODE 1SS355TE-17 (S725D: EXCEPT Australian) 8-719-988-61 DIODE 1SS355TE-17 (S725D: EXCEPT Australian)
D427
Remark
< EARTH TERMINAL > * ET401 * ET402 * ET403
18PF 5% 50V 18PF 5% 50V 0.1uF 10% 25V (S725D: EXCEPT Australian)
< CONNECTOR > CN301 CN302
Part No.
1-564-002-11 PIN, CONNECTOR 3P 1-785-697-11 CONNECTOR, FFC/FPC 18P (S725D: EXCEPT Australian) 1-564-241-11 PIN, CONNECTOR (B4P-VH) 4P 1-785-698-11 CONNECTOR, FFC/FPC 28P 1-785-695-11 CONNECTOR, FFC/FPC 13P 1-506-473-11 PIN, CONNECTOR 8P 1-785-694-11 CONNECTOR, FFC/FPC 7P 1-785-694-11 CONNECTOR, FFC/FPC 7P (S725D: EXCEPT Australian) 1-564-001-11 PIN, CONNECTOR 2P
1-537-738-21 TERMINAL, EARTH 1-537-738-21 TERMINAL, EARTH 1-537-738-21 TERMINAL, EARTH < FERRITE BEAD >
FB301 FB302 FB303 FB304 FB305
1-414-135-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH 0uH
FB306 FB307 FB308 FB309 FB310
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH 0uH (S725D: Australian)
FB311 FB312 FB313 FB314 FB315
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH 0uH
FB316 FB317 FB318 FB319 FB320
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH (S725D: Australian) 0uH 0uH
FB321 FB322 FB323 FB324 FB401
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH (S725D: EXCEPT Australian) 0uH (S725D: EXCEPT Australian) 0uH (S725D: EXCEPT Australian) 0uH
FB402
1-414-553-11 FERRITE
0uH
< IC > < DIODE > D301 D302 D303 D304 D401
8-719-071-15 8-719-071-15 8-719-071-15 8-719-071-15 8-719-210-21
DIODE DIODE DIODE DIODE DIODE
IC301 IC302 IC303 IC401 IC403
HZM6.8ZWA1TL HZM6.8ZWA1TL (S725D: Australian) HZM6.8ZWA1TL HZM6.8ZWA1TL (S725D: Australian) 11EQS04
8-14
8-759-563-79 8-759-563-79 8-749-921-12 8-759-008-67 8-759-059-79
IC IC IC IC IC
BA7660F-E2 BA7660F-E2 GP1F32T MC14066BF BA15532
AU-210 Ref. No.
Part No.
Description
IC404 IC405 IC406 IC407 IC408
8-759-059-79 8-759-634-51 8-759-634-51 8-759-971-80 8-759-710-59
IC IC IC IC IC
BA15532 M5218AP M5218AP AD712JN NJM4580D-D
Remark
IC409 IC410 IC411 IC412 IC415
8-759-710-59 8-759-710-59 8-759-711-85 8-759-711-85 8-759-604-35
IC IC IC IC IC
NJM4580D-D NJM4580D-D NJM4580E-D NJM4580E-D M5F78M05
Ref. No. Q423 Q424 Q425 Q426
Q427
< JACK > J301 J302 J303 J304 J305
J306 J307 J308 J309
1-779-382-21 1-784-675-11 1-785-489-11 1-778-064-11
JACK, PIN 1P (COAXIAL) JACK, PIN 3P (COMPONENT VIDEO OUT) JACK, PIN 6P (5.1CH OUTPUT) JACK, PIN 4P (AUDIO OUT) (S725D: Australian) 1-785-538-11 JACK, PIN (2P) (VIDEO OUT) (S725D: Australian) 1-694-484-11 TERMINAL, S (2P.V) (S VIDEO OUT) (S725D: Australian) 1-774-727-11 JACK, PIN 2P (AUDIO OUT) (S725D: EXCEPT Australian) 1-779-800-11 TERMINAL, S (S VIDEO OUT) (S725D: EXCEPT Australian) 1-779-795-11 JACK, PIN 1P (VIDEO OUT) (S725D: EXCEPT Australian) < COIL >
L301 L303 L401 L402 L403
1-412-963-11 1-412-963-11 1-412-953-11 1-412-953-11 1-412-953-11
INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR
100uH 100uH 15uH 15uH 15uH
L404 L405 L406 L407
1-412-953-11 1-412-953-11 1-412-953-11 1-412-963-11
INDUCTOR INDUCTOR INDUCTOR INDUCTOR
15uH 15uH 15uH 100uH (S725D: EXCEPT Australian)
< TRANSISTOR > Q301 Q302 Q303 Q401 Q402
8-729-421-19 8-729-424-08 8-729-120-28 8-729-424-08 8-729-424-08
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2213 UN2111 2SC1623-L5L6 UN2111 UN2111
Q403 Q404 Q405 Q410 Q411
8-729-424-08 8-729-424-08 8-729-216-22 8-729-046-97 8-729-046-97
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2111 UN2111 2SA1162 2SD1938 (F)-T (TX).SO 2SD1938 (F)-T (TX).SO
Q412 Q413 Q414 Q415 Q416
8-729-046-97 8-729-046-97 8-729-046-97 8-729-046-97 8-729-046-97
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
2SD1938 (F)-T (TX).SO 2SD1938 (F)-T (TX).SO 2SD1938 (F)-T (TX).SO 2SD1938 (F)-T (TX).SO 2SD1938 (F)-T (TX).SO
Q417 Q418 Q419 Q420 Q421
8-729-046-97 8-729-046-97 8-729-046-97 8-729-141-10 8-729-141-58
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
2SD1938 (F)-T (TX).SO 2SD1938 (F)-T (TX).SO 2SD1938 (F)-T (TX).SO 2SA985A 2SC2275A-QP
Q422
8-729-224-62 TRANSISTOR 2SK246-GR
8-15
Part No.
AU-211
Description
Remark
8-729-421-19 TRANSISTOR UN2213 8-729-421-19 TRANSISTOR UN2213 8-729-422-03 TRANSISTOR XN1B301-TX (S725D: EXCEPT Australian) 8-729-422-03 TRANSISTOR XN1B301-TX (S725D: EXCEPT Australian)
Q431 Q432 Q433 Q434
8-729-422-03 TRANSISTOR XN1B301-TX (S725D: EXCEPT Australian) 8-729-424-08 TRANSISTOR UN2111 8-729-424-08 TRANSISTOR UN2111 8-729-424-08 TRANSISTOR UN2111 8-729-424-08 TRANSISTOR UN2111
Q435 Q437 Q438 Q439
8-729-421-19 8-729-424-08 8-729-421-19 8-729-424-08
Q440
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2213 UN2111 UN2213 UN2111 (S725D: EXCEPT Australian) 8-729-421-19 TRANSISTOR UN2213 (S725D: EXCEPT Australian) < RESISTOR >
R301 R302 R303 R304 R305
1-216-057-00 1-216-073-00 1-216-073-00 1-216-063-91 1-216-055-00
METAL CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP
2.2K 10K 10K 3.9K 1.8K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R306 R307 R308
1-216-021-00 METAL CHIP 1-216-021-00 METAL CHIP 1-216-021-00 METAL CHIP
68 68 68
R308
1-216-295-91 SHORT
R309
1-216-021-00 METAL CHIP
0 (S725D: EXCEPT Australian) 68 5% 1/10W
R310 R311 R312 R313 R314
1-216-021-00 1-216-021-00 1-216-033-00 1-216-021-00 1-216-025-91
METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP
68 68 220 68 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R315 R316 R317 R320 R348
1-216-021-00 1-216-021-00 1-216-021-00 1-216-073-00 1-216-097-91
METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP
68 68 68 10K 100K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R350
1-216-295-91 SHORT
R400
1-216-065-91 RES, CHIP
R401 R402
1-216-037-00 METAL CHIP 1-216-042-00 METAL CHIP
R402
1-216-047-91 RES, CHIP
R403 R404
1-216-042-00 METAL CHIP 1-216-042-00 METAL CHIP
R404
1-216-047-91 RES, CHIP
R405 R406
1-216-042-00 METAL CHIP 1-216-042-00 METAL CHIP
R406
1-216-047-91 RES, CHIP
R407
1-216-042-00 METAL CHIP
5% 1/10W 5% 1/10W 5% 1/10W (S725D: Australian)
0 (S725D: EXCEPT Australian) 4.7K 5% 1/10W (S725D: EXCEPT Australian) 330 5% 1/10W 510 5% 1/10W (S725D: Australian) 820 5% 1/10W (S725D: EXCEPT Australian) 510 510
5% 1/10W 5% 1/10W (S725D: Australian) 820 5% 1/10W (S725D: EXCEPT Australian) 510 5% 1/10W 510 5% 1/10W (S725D: Australian) 820 5% 1/10W (S725D: EXCEPT Australian) 510 5% 1/10W
AU-210 Ref. No.
AU-211
Part No.
Description
Remark 5% 5% 5%
Ref. No.
R408 R409 R410
1-216-073-00 METAL CHIP 1-216-097-91 RES, CHIP 1-216-097-91 RES, CHIP
10K 100K 100K
1/10W 1/10W 1/10W
R411 R412 R413 R414 R415
1-216-097-91 1-216-097-91 1-216-073-00 1-216-097-91 1-216-061-00
100K 5% 1/10W 100K 5% 1/10W 10K 5% 1/10W 100K 5% 1/10W 3.3K 5% 1/10W (S725D: EXCEPT Australian)
R415 R416
1-216-295-91 SHORT 1-216-065-91 RES, CHIP
R417
1-216-061-00 METAL CHIP
R418
1-216-065-91 RES, CHIP
R419
1-216-061-00 METAL CHIP
R420 R423 R425 R426 R428
1-216-063-91 1-216-109-00 1-216-109-00 1-216-109-00 1-216-109-00
RES, CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
3.9K 330K 330K 330K 330K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R429 R430 R431 R432 R433
1-216-109-00 1-216-066-00 1-216-109-00 1-216-109-00 1-216-066-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
330K 5.1K 330K 330K 5.1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R434 R435
1-216-109-00 METAL CHIP 1-216-049-91 RES, CHIP
R437 R438 R439
Part No.
Description
Remark
R467 R468 R469
1-216-055-00 METAL CHIP 1-216-045-00 METAL CHIP 1-216-061-00 METAL CHIP
1.8K 680 3.3K
5% 5% 5%
1/10W 1/10W 1/10W
R470 R471 R472 R473 R474
1-216-075-00 1-216-109-00 1-216-109-00 1-216-109-00 1-216-109-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
12K 330K 330K 330K 330K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R475 R476 R477 R478 R479
1-216-109-00 1-216-109-00 1-216-109-00 1-216-109-00 1-259-412-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP CARBON
330K 330K 330K 330K 220
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/6W
R480 R481 R482 R483 R484
1-216-041-00 1-216-041-00 1-216-041-00 1-216-085-00 1-216-085-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
470 470 470 33K 33K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R485 R486 R487 R488 R489
1-259-412-11 1-216-041-00 1-216-041-00 1-216-041-00 1-216-049-91
CARBON METAL CHIP METAL CHIP METAL CHIP RES, CHIP
220 470 470 470 1K
5% 5% 5% 5% 5%
1/6W 1/10W 1/10W 1/10W 1/10W
R490 R491 R492 R493 R494
1-216-049-91 1-216-049-91 1-216-025-91 1-216-025-91 1-216-049-91
RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
1K 1K 100 100 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
1-216-066-00 METAL CHIP 1-216-067-00 METAL CHIP 1-259-452-11 CARBON
330K 5% 1/10W 1K 5% 1/10W (S725D: EXCEPT Australian) 5.1K 5% 1/10W 5.6K 5% 1/10W 10K 5% 1/6W
R495 R496 R497 R498 R499
1-216-049-91 1-216-025-91 1-216-025-91 1-216-049-91 1-216-049-91
RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
1K 100 100 1K 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R440 R441 R442 R443 R444
1-216-073-00 1-216-073-00 1-216-075-00 1-259-452-11 1-216-073-00
METAL CHIP METAL CHIP METAL CHIP CARBON METAL CHIP
10K 10K 12K 10K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/6W 1/10W
R500 R501 R502 R504 R505
1-216-025-91 1-216-025-91 1-216-049-91 1-216-085-00 1-216-085-00
RES, CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
100 100 1K 33K 33K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R445 R446 R447 R448 R449
1-216-073-00 1-216-073-00 1-259-426-11 1-216-047-91 1-216-047-91
METAL CHIP METAL CHIP CARBON RES, CHIP RES, CHIP
10K 10K 820 820 820
5% 5% 5% 5% 5%
1/10W 1/10W 1/6W 1/10W 1/10W
R506 R507 R508 R509 R510
1-259-420-11 1-259-420-11 1-259-420-11 1-259-420-11 1-216-085-00
CARBON CARBON CARBON CARBON METAL CHIP
470 470 470 470 33K
5% 5% 5% 5% 5%
1/6W 1/6W 1/6W 1/6W 1/10W
R450 R451 R452 R453 R454
1-216-063-91 1-259-426-11 1-216-047-91 1-216-047-91 1-216-047-91
RES, CHIP CARBON RES, CHIP RES, CHIP RES, CHIP
3.9K 820 820 820 820
5% 5% 5% 5% 5%
1/10W 1/6W 1/10W 1/10W 1/10W
R511 R512 R513 R514 R515
1-216-077-00 1-216-077-00 1-216-085-00 1-216-025-91 1-216-025-91
METAL CHIP METAL CHIP METAL CHIP RES, CHIP RES, CHIP
15K 15K 33K 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R455 R456 R457 R458 R459
1-259-434-11 1-259-424-11 1-259-424-11 1-259-434-11 1-216-055-00
CARBON CARBON CARBON CARBON METAL CHIP
1.8K 680 680 1.8K 1.8K
5% 5% 5% 5% 5%
1/6W 1/6W 1/6W 1/6W 1/10W
R516 R517 R519 R520 R521
1-216-049-91 1-216-049-91 1-259-440-11 1-259-404-11 1-259-440-11
RES, CHIP RES, CHIP CARBON CARBON CARBON
1K 1K 3.3K 100 3.3K
5% 5% 5% 5% 5%
1/10W 1/10W 1/6W 1/6W 1/6W
R460 R461 R462 R463 R464
1-216-045-00 1-216-045-00 1-216-055-00 1-216-055-00 1-216-045-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
680 680 1.8K 1.8K 680
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R523 R524 R525 R526 R531
1-259-404-11 1-259-466-11 1-259-404-11 1-216-081-00 1-216-097-91
CARBON CARBON CARBON METAL CHIP RES, CHIP
100 39K 100 22K 100K
5% 5% 5% 5% 5%
1/6W 1/6W 1/6W 1/10W 1/10W
R465 R466
1-216-045-00 METAL CHIP 1-216-055-00 METAL CHIP
680 1.8K
5% 5%
1/10W 1/10W
R532 R533
1-216-097-91 RES, CHIP 1-216-097-91 RES, CHIP
100K 100K
5% 5%
1/10W 1/10W
RES, CHIP RES, CHIP METAL CHIP RES, CHIP METAL CHIP
0 (S725D: Australian) 4.7K 5% 1/10W (S725D: EXCEPT Australian) 3.3K 5% 1/10W (S725D: EXCEPT Australian) 4.7K 5% 1/10W (S725D: EXCEPT Australian) 3.3K 5% 1/10W (S725D: EXCEPT Australian)
8-16
AU-210 Ref. No.
Part No.
Description
Remark
R534 R536 R538
1-216-097-91 RES, CHIP 1-216-295-91 SHORT 1-216-295-91 SHORT
100K 0 0
5%
R539 R540 R542 R543 R544
1-216-295-91 1-216-295-91 1-259-445-11 1-259-445-11 1-216-063-91
SHORT SHORT CARBON CARBON RES, CHIP
0 0 5.1K 5.1K 3.9K
5% 5% 5%
1/6W 1/6W 1/10W
R545 R546 R547 R548 R549
1-216-059-00 1-216-085-00 1-216-059-00 1-259-445-11 1-259-445-11
METAL CHIP METAL CHIP METAL CHIP CARBON CARBON
2.7K 33K 2.7K 5.1K 5.1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/6W 1/6W
R550 R552 R553 R556 R557 R557
1-216-081-00 1-216-066-00 1-216-066-00 1-216-066-00 1-216-066-00 1-216-066-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
22K 5.1K 5.1K 5.1K 5.1K 5.1K
5% 5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W 1/10W
Ref. No.
1/10W
*
1-104-664-11 1-163-021-91 1-104-664-11 1-163-021-91 1-104-664-11
ELECT CERAMIC CHIP ELECT CERAMIC CHIP ELECT
47uF 0.01uF 47uF 0.01uF 47uF
20% 10% 20% 10% 20%
16V 50V 16V 50V 16V
C906 C907 C908 C909 C910
1-163-021-91 1-104-664-11 1-128-551-11 1-128-551-11 1-128-551-11
CERAMIC CHIP ELECT ELECT ELECT ELECT
0.01uF 47uF 22uF 22uF 22uF
10% 20% 20% 20% 20%
50V 16V 25V 25V 25V
C911 C912 C913 C914 C915
1-163-021-91 1-128-551-11 1-163-021-91 1-126-935-11 1-128-551-11
CERAMIC CHIP ELECT CERAMIC CHIP ELECT ELECT
0.01uF 22uF 0.01uF 470uF 22uF
10% 20% 10% 20% 20%
50V 25V 50V 6.3V 25V
C916 C917 C918 C919 C920
1-126-935-11 1-128-551-11 1-126-935-11 1-128-551-11 1-163-021-91
ELECT ELECT ELECT ELECT CERAMIC CHIP
470uF 22uF 470uF 22uF 0.01uF
20% 20% 20% 20% 10%
6.3V 25V 6.3V 25V 50V
C921 C922 C923 C924 C926
1-128-551-11 1-128-551-11 1-163-021-91 1-126-935-11 1-104-664-11
ELECT ELECT CERAMIC CHIP ELECT ELECT
22uF 22uF 0.01uF 470uF 47uF
20% 20% 10% 20% 20%
25V 25V 50V 6.3V 16V
C927 C938 C939 C940 C941
1-163-021-91 1-163-133-00 1-163-133-00 1-163-133-00 1-163-133-00
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 470PF 470PF 470PF 470PF
10% 5% 5% 5% 5%
50V 50V 50V 50V 50V
C942 C943 C944 C945
1-163-133-00 1-163-133-00 1-163-133-00 1-163-133-00
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
470PF 470PF 470PF 470PF
5% 5% 5% 5%
50V 50V 50V 50V
Description
ER-5 Remark
C950
1-163-251-11 CERAMIC CHIP
100PF
5%
50V
C951 C962 C963 C972 C973
1-163-251-11 1-163-251-11 1-163-251-11 1-163-021-91 1-163-239-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
100PF 100PF 100PF 0.01uF 33PF
5% 5% 5% 10% 5%
50V 50V 50V 50V 50V
C974 C975 C976 C977 C978
1-163-239-11 1-163-239-11 1-163-233-11 1-163-233-11 1-163-233-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
33PF 33PF 18PF 18PF 18PF
5% 5% 5% 5% 5%
50V 50V 50V 50V 50V
CN901 CN902 CN903 CN904
1-785-729-21 1-785-732-21 1-251-780-11 1-251-780-11
CONNECTOR, FFC/FPC 7P CONNECTOR, FFC/FPC 18P SOCKET, PIN (21P) SOCKET, PIN (21P) < DIODE >
< CAPACITOR > C901 C902 C903 C904 C905
ER-4
< CONNECTOR >
A-6065-226-A ER-4 BOARD, COMPLETE (S325/S525D: EXCEPT Australian) A-6065-249-A ER-5 BOARD, COMPLETE (S725D: EXCEPT Australian) ******************** (Ref. No. 2,000 Series)
*
Part No.
AU-211
D901 D902 D903 D904 D905
8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61
D906 D907
D915
8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 (S725D: EXCEPT Australian) 8-719-071-15 DIODE HZM6.8ZWA1TL 8-719-988-61 DIODE 1SS355TE-17 (S725D: EXCEPT Australian) 8-719-071-15 DIODE HZM6.8ZWA1TL
D917 D918 D919 D920 D921
8-719-071-15 8-719-071-15 8-719-071-15 8-719-071-15 8-719-071-15
DIODE DIODE DIODE DIODE DIODE
HZM6.8ZWA1TL HZM6.8ZWA1TL HZM6.8ZWA1TL HZM6.8ZWA1TL HZM6.8ZWA1TL
D922 D923 D924 D926 D927
8-719-071-15 8-719-071-15 8-719-071-15 8-719-056-82 8-719-977-40
DIODE DIODE DIODE DIODE DIODE
HZM6.8ZWA1TL HZM6.8ZWA1TL HZM6.8ZWA1TL UDZ-TE-17-6.2B UDZ-TE-17-13B
D929 D930
8-719-056-82 DIODE UDZ-TE-17-6.2B 8-719-977-40 DIODE UDZ-TE-17-13B
D908 D910
DIODE DIODE DIODE DIODE DIODE
1SS355TE-17 1SS355TE-17 1SS355TE-17 1SS355TE-17 1SS355TE-17
< EARTH TERMINAL > * ET901
1-537-738-21 TERMINAL, EARTH < FERRITE BEAD >
8-17
FB901 FB902 FB903 FB904 FB905
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH 0uH
FB906 FB907 FB908 FB909 FB910
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH 0uH
FB911 FB912
1-414-553-11 FERRITE 1-414-553-11 FERRITE
0uH 0uH
ER-4 Ref. No.
ER-5 Part No.
Description
Remark
FB913 FB914 FB915
1-414-553-11 FERRITE 1-414-553-11 FERRITE 1-414-553-11 FERRITE
0uH 0uH 0uH
FB916 FB917 FB918
1-414-553-11 FERRITE 1-414-553-11 FERRITE 1-414-553-11 FERRITE
0uH 0uH 0uH
Ref. No.
Part No.
Description
JR925
1-216-296-91 SHORT
JR926
1-216-296-91 SHORT
JR927
1-216-295-91 SHORT
JR928
1-216-296-91 SHORT
JR929
1-216-296-91 SHORT
JR930
1-216-296-91 SHORT
JR932
1-216-296-91 SHORT
JR933
1-216-296-91 SHORT
JR934
1-216-296-91 SHORT
JR935
1-216-296-91 SHORT
JR936
1-216-295-91 SHORT
JR937
1-216-295-91 SHORT
< IC > IC901 IC901 IC902 IC903
8-759-563-79 IC BA7660F-E2 (S325/S525D: EXCEPT Australian) 8-759-522-11 IC BA7660FS-E2 (S725D: EXCEPT Australian) 8-759-432-78 IC MM1111XFBE 8-759-567-33 IC MM1225XFBE < JUMPER RESISTOR >
JR900
1-216-296-91 SHORT
JR901
1-216-296-91 SHORT
JR902
1-216-295-91 SHORT
JR903
1-216-296-91 SHORT
JR904
1-216-296-91 SHORT
JR905
1-216-295-91 SHORT
JR906
1-216-295-91 SHORT
JR907
1-216-296-91 SHORT
JR908
1-216-296-91 SHORT
JR909
1-216-296-91 SHORT
JR910
1-216-295-91 SHORT
JR911
1-216-296-91 SHORT
JR912
1-216-296-91 SHORT
JR913
1-216-295-91 SHORT
JR914
1-216-296-91 SHORT
JR915
1-216-296-91 SHORT
JR916
1-216-296-91 SHORT
JR917
1-216-295-91 SHORT
JR918
1-216-296-91 SHORT
JR919
1-216-296-91 SHORT
JR920
1-216-296-91 SHORT
JR921
1-216-295-91 SHORT
JR922
1-216-295-91 SHORT
JR923
1-216-296-91 SHORT
JR924
1-216-295-91 SHORT
0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian)
Remark 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian)
< COIL > 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian)
L901 L902 L903 L904 L905
1-412-064-11 1-412-064-11 1-412-058-11 1-412-064-11 1-412-953-11
INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR
L906 L907
1-412-953-11 INDUCTOR 1-412-953-11 INDUCTOR
100uH 100uH 10uH 100uH 15uH 15uH 15uH
< TRANSISTOR > 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian)
Q901 Q902 Q903 Q904 Q905
8-729-421-19 8-729-422-27 8-729-424-08 8-729-421-19 8-729-422-27
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2213 2SD601A-Q UN2111 UN2213 2SD601A-Q
Q906 Q907 Q908 Q909 Q910
8-729-421-19 8-729-424-08 8-729-421-22 8-729-421-19 8-729-424-08
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2213 UN2111 UN2211 UN2213 UN2111
Q912 Q913 Q914 Q915 Q916
8-729-422-27 8-729-422-27 8-729-422-27 8-729-422-27 8-729-422-27
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
2SD601A-Q 2SD601A-Q 2SD601A-Q 2SD601A-Q 2SD601A-Q
Q917
8-729-421-19 TRANSISTOR UN2213 (S725D: EXCEPT Australian) 8-729-421-19 TRANSISTOR UN2213 (S725D: EXCEPT Australian)
Q918 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian)
8-18
< RESISTOR > R901 R902 R903 R904 R905
1-216-113-00 1-216-095-00 1-216-113-00 1-216-095-00 1-216-113-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
470K 82K 470K 82K 470K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
ER-4 Ref. No.
ER-5
FL-98
FL-99
FL-100
FL-101
Part No.
Description
Remark
Ref. No.
Part No.
R906 R907 R908 R909 R910
1-216-095-00 1-216-089-91 1-216-105-91 1-216-039-00 1-216-039-00
METAL CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
82K 47K 220K 390 390
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
*
R911 R912 R913 R914 R915
1-216-039-00 1-216-039-00 1-216-057-00 1-216-057-00 1-216-045-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
390 390 2.2K 2.2K 680
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
*
A-6065-227-A FL-98 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-267-A FL-98 BOARD, COMPLETE (S325) A-6065-240-A FL-99 BOARD, COMPLETE (S725D: Australian) A-6065-250-A FL-100 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-223-A FL-101 BOARD, COMPLETE (S525D: Australian) ********************** (Ref. No. 2,000 Series)
R916 R917 R918 R920 R922
1-216-057-00 1-216-057-00 1-216-021-00 1-216-049-91 1-216-021-00
METAL CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP
2.2K 2.2K 68 1K 68
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R923 R924 R925 R926 R927
1-216-049-91 1-216-049-91 1-216-049-91 1-216-049-91 1-216-020-00
RES, CHIP RES, CHIP RES, CHIP RES, CHIP METAL CHIP
1K 1K 1K 1K 62
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R928 R929 R930 R931 R932
1-216-021-00 1-216-021-00 1-216-065-91 1-216-065-91 1-216-065-91
METAL CHIP METAL CHIP RES, CHIP RES, CHIP RES, CHIP
68 68 4.7K 4.7K 4.7K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R933 R934 R938 R939 R940
1-216-065-91 1-216-065-91 1-216-025-91 1-216-017-91 1-216-042-00
RES, CHIP RES, CHIP RES, CHIP RES, CHIP METAL CHIP
R940
1-216-047-91 RES, CHIP
R941
1-216-042-00
R941
1-216-047-91
R942
1-216-042-00
R942
1-216-047-91
R943 R944 R945
1-216-073-00 METAL CHIP 1-216-073-00 METAL CHIP 1-216-081-00 METAL CHIP
R946
1-216-065-91 RES, CHIP
R948
1-216-022-00 METAL CHIP
* * *
Description
Remark
3-053-487-01 HOLDER, FL TUBE < CAPACITOR >
4.7K 5% 1/10W 4.7K 5% 1/10W 100 5% 1/10W 47 5% 1/10W 510 5% 1/10W (S325/S525D: EXCEPT Australian)
820 5% 1/10W (S725D: EXCEPT Australian) METAL CHIP 510 5% 1/10W (S325/S525D: EXCEPT Australian) RES, CHIP 820 5% 1/10W (S725D: EXCEPT Australian) METAL CHIP 510 5% 1/10W (S325/S525D: EXCEPT Australian) RES, CHIP 820 5% 1/10W (S725D: EXCEPT Australian) 10K 5% 1/10W 10K 5% 1/10W 22K 5% 1/10W (S725D: EXCEPT Australian) 4.7K 5% 1/10W (S725D: EXCEPT Australian) 75 5% 1/10W
C201 C203 C205 C209
1-124-259-11 1-164-004-11 1-164-004-11 1-163-021-91
ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
4.7uF 0.1uF 0.1uF 0.01uF
20% 10% 10% 10%
C210
1-163-021-91 CERAMIC CHIP
0.01uF
10%
C211 C212
1-164-004-11 CERAMIC CHIP 1-163-021-91 CERAMIC CHIP
0.1uF 0.01uF
C213
1-163-021-91 CERAMIC CHIP
0.01uF
C214
1-163-021-91 CERAMIC CHIP
0.01uF
C215
1-163-021-91 CERAMIC CHIP
0.01uF
10% 25V 10% 50V (S525D/S725D) 10% 50V (S525D/S725D) 10% 50V (S525D/S725D) 10% 50V
C216 C219 C220 C221 C222
1-163-021-91 1-115-339-11 1-115-339-11 1-164-004-11 1-164-004-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.1uF 0.1uF 0.1uF 0.1uF
10% 10% 10% 10% 10%
50V 50V 50V 25V 25V
C223 C235 C236 C237 C238
1-128-131-11 1-163-259-91 1-163-259-91 1-163-259-91 1-163-259-91
ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
22uF 220PF 220PF 220PF 220PF
20% 5% 5% 5% 5%
50V 50V 50V 50V 50V
C239 C240 C241 C242 C243
1-163-259-91 1-163-259-91 1-163-259-91 1-163-259-91 1-163-259-91
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
220PF 220PF 220PF 220PF 220PF
5% 5% 5% 5% 5%
50V 50V 50V 50V 50V
< CONNECTOR > CN201 CN202 CN203
< RELAY > RY901 RY902 RY903 RY904 RY905
1-755-041-11 1-755-041-11 1-755-041-11 1-755-041-11 1-755-041-11
16V 25V 25V 50V (S725D) 50V (S725D)
1-568-666-21 CONNECTOR, BOARD TO BOARD 12P 1-785-731-21 CONNECTOR, FFC/FPC 17P 1-785-730-21 CONNECTOR, FFC/FPC 9P < DIODE >
RELAY RELAY RELAY RELAY RELAY
D202 D203 D204 D206 D207
8-719-988-61 DIODE 1SS355TE-17 8-719-069-45 DIODE SELU5E23C-TP15 (MULTI CHANNEL) (S525D/S725D) 8-719-056-06 DIODE SLR-342DCT31 (JOG) (S525D/S725D) 8-719-018-12 DIODE MA8330-L-TX 8-719-422-67 DIODE MA8062-H-TX < EARTH TERMINAL >
* ET201
1-537-738-21 TERMINAL, EARTH (S725D) < FERRITE BEAD >
FB201
8-19
1-414-135-11 FERRITE
0uH
FL-98 Ref. No.
FL-99
Part No.
FL-100
FL-101
Description
Remark
Ref. No.
< IC > IC201 IC202
8-759-574-86 IC M38B57MCH-E206FP 8-759-326-78 IC PST9140NL < JUMPER RESISTOR >
Part No.
Description
Remark
R214 R215 R216
1-216-059-00 METAL CHIP 1-216-061-00 METAL CHIP 1-216-065-91 RES, CHIP
2.7K 3.3K 4.7K
5% 5% 5%
1/10W 1/10W 1/10W
R217 R218 R221 R222
1-216-071-00 1-216-077-00 1-208-806-11 1-216-053-00
METAL CHIP METAL CHIP RES, CHIP METAL CHIP
8.2K 15K 10K 1.5K
R223
1-216-055-00 METAL CHIP
1.8K
5% 1/10W 5% 1/10W 0.50% 1/10W 5% 1/10W (S525D/S725D) 5% 1/10W (S525D/S725D)
R224
1-216-059-00 METAL CHIP
2.7K
JR201 JR202 JR203 JR204 JR205
1-216-295-91 1-216-295-91 1-216-295-91 1-216-295-91 1-216-296-91
SHORT SHORT SHORT SHORT SHORT
0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D)
JR206 JR207 JR208 JR209 JR210
1-216-295-91 1-216-296-91 1-216-295-91 1-216-296-91 1-216-296-91
SHORT SHORT SHORT SHORT SHORT
0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D)
R225
1-216-061-00 METAL CHIP
3.3K
R226
1-216-025-91 RES, CHIP
100
R227
1-216-025-91 RES, CHIP
100
JR211 JR212 JR214 JR216 JR217
1-216-295-91 1-216-296-91 1-216-296-91 1-216-296-91 1-216-296-91
SHORT SHORT SHORT SHORT SHORT
0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D)
R229
1-216-063-91 RES, CHIP
3.9K
5% 1/10W (S525D/S725D) 5% 1/10W (S525D/S725D) 5% 1/10W (S525D/S725D) 5% 1/10W (S525D/S725D) 5% 1/10W
JR218 JR219 JR220 JR224 JR226
1-216-295-91 1-216-295-91 1-216-295-91 1-216-296-91 1-216-295-91
SHORT SHORT SHORT SHORT SHORT
0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D)
R230 R231 R232 R241 R243
1-216-073-00 1-216-025-91 1-216-025-91 1-216-073-00 1-216-073-00
METAL CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
10K 100 100 10K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
JR229 JR230 JR231 JR233 JR234
1-216-296-91 1-216-296-91 1-216-295-91 1-216-296-91 1-216-295-91
SHORT SHORT SHORT SHORT SHORT
0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D)
R244 R247 R248 R249 R250
1-216-073-00 1-216-073-00 1-216-073-00 1-216-073-00 1-216-073-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 10K 10K 10K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
JR235 JR236 JR237 JR238 JR244
1-216-295-91 1-216-295-91 1-216-295-91 1-216-296-91 1-216-295-91
SHORT SHORT SHORT SHORT SHORT
0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D)
R251 R252 R253 R254 R255
1-216-049-91 1-216-049-91 1-216-073-00 1-216-073-00 1-216-073-00
RES, CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP
1K 1K 10K 10K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
JR249
1-216-296-91 SHORT
0 (S325/S525D)
R256 R257 R258 R259 R260
1-216-073-00 1-216-025-91 1-216-025-91 1-216-025-91 1-216-025-91
METAL CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
10K 100 100 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R261 R262 R263
1-216-025-91 RES, CHIP 1-216-025-91 RES, CHIP 1-216-073-00 METAL CHIP
100 100 10K
R264 R266
1-216-073-00 METAL CHIP 1-216-057-00 METAL CHIP
10K 2.2K
5% 1/10W 5% 1/10W 5% 1/10W (S525D/S725D) 5% 1/10W 5% 1/10W (S725D)
R266
1-216-073-00 METAL CHIP
10K
5%
R267 R268 R270 R271
1-216-049-91 1-216-089-91 1-216-073-00 1-216-073-00
RES, CHIP RES, CHIP METAL CHIP METAL CHIP
1K 47K 10K 10K
5% 5% 5% 5%
1/10W (S325) 1/10W 1/10W 1/10W 1/10W
R272 R273 R274 R275 R276
1-216-065-91 1-216-025-91 1-216-097-91 1-216-073-00 1-216-073-00
RES, CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
4.7K 100 100K 10K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R277 R278 R279 R280
1-216-073-00 1-216-073-00 1-216-073-00 1-216-073-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 10K 10K 10K
5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W (S325)
< FLUORESCENT INDICATOR > ND201
1-517-836-11 INDICATOR TUBE, FLUORESCENT < TRANSISTOR >
Q201
8-729-804-41 TRANSISTOR 2SB1122-S < RESISTOR >
R201 R202 R203 R204 R205
1-208-806-11 1-216-053-00 1-216-055-00 1-216-059-00 1-216-061-00
RES, CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 1.5K 1.8K 2.7K 3.3K
0.50% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R206 R207 R208
1-216-065-91 RES, CHIP 1-216-071-00 METAL CHIP 1-216-077-00 METAL CHIP
4.7K 8.2K 15K
R209
1-216-091-00 METAL CHIP
56K
R211
1-208-806-11 RES, CHIP
10K
5% 1/10W 5% 1/10W 5% 1/10W (S525D/S725D) 5% 1/10W (S725D) 0.50% 1/10W
R212 R213
1-216-053-00 METAL CHIP 1-216-055-00 METAL CHIP
1.5K 1.8K
5% 5%
1/10W 1/10W
8-20
FL-98
Ref. No.
Part No.
FL-99
FL-100
Description
FL-101
Remark
FR-147
FR-148
FR-149
FR-150
HP-108
HP-109
HP-110
HP-111
Ref. No.
R284
1-216-073-00 METAL CHIP
10K
5%
R285
1-216-045-00 METAL CHIP
680
R286 R287
1-216-073-00 METAL CHIP 1-216-037-00 METAL CHIP
10K 330
R288 R289
1-216-073-00 METAL CHIP 1-216-073-00 METAL CHIP
10K 10K
5% 1/10W (S525D/S725D) 5% 1/10W 5% 1/10W (S525D/S725D) 5% 1/10W 5% 1/10W
R298
1-216-025-91 RES, CHIP
100
5%
R299
1-216-025-91 RES, CHIP
100
5%
Part No.
1/10W
1-771-349-21 1-771-349-21 1-771-349-21 1-771-349-21 1-771-349-21
S214 S215 S216 S217
1-771-349-21 1-771-349-21 1-771-349-21 1-771-349-21
S217
Remark
< CONNECTOR > CN001 CN002 CN003
1-506-485-11 PIN, CONNECTOR 6P 1-568-672-11 CONNECTOR, BOARD TO BOARD 12P 1-785-712-11 CONNECTOR, BOARD TO BOARD 4P (S525D/S725D) < DIODE >
D001 D002 D003 D004 D071
1/10W (S725D) 1/10W (S725D)
8-719-041-97 8-719-041-97 8-719-041-97 8-719-041-97 8-719-064-11
< SWITCH > S201 S202 S208 S212 S213
Description
DIODE DIODE DIODE DIODE DIODE
MA113-(TX) MA113-(TX) MA113-(TX) MA113-(TX) SPR-325MVW (ON/STANDBY)
< FERRITE BEAD >
SWITCH, KEYBOARD (p) SWITCH, KEYBOARD (P) SWITCH, KEYBOARD (JOG) (S525D/S725D) SWITCH, KEYBOARD (OPEN/CLOSE §) SWITCH, KEYBOARD (()
FB001 FB002 FB004
1-414-135-11 FERRITE 1-414-135-11 FERRITE 1-469-324-21 FERRITE
0uH 0uH 0uH
< IC >
SWITCH, KEYBOARD (TITLE) SWITCH, KEYBOARD (DVD MENU) SWITCH, KEYBOARD (RETURN) SWITCH, KEYBOARD (PREV =) (S325/S525D) 1-771-349-21 SWITCH, KEYBOARD (0 SEARCH) (S725D)
IC051
8-749-011-22 IC GP1U27X < COIL >
L001
1-408-978-21 INDUCTOR
47uH
< TRANSISTOR > S218 S218 S221 S222 S223
S224 S230
1-771-349-21 SWITCH, KEYBOARD (+ NEXT) (S325/S525D) 1-771-349-21 SWITCH, KEYBOARD (SEARCH )) (S725D) 1-771-349-21 SWITCH, KEYBOARD (REREAT) (S525D/S725D) 1-771-349-21 SWITCH, KEYBOARD (CLEAR) (S525D/S725D) 1-771-349-21 SWITCH, KEYBOARD (PROGRAM) (S525D/S725D)
Q001 Q002
8-729-808-41 TRANSISTOR 2SD1624-S 8-729-808-41 TRANSISTOR 2SD1624-S < RESISTOR >
R002 R003 R071 R072
1-771-349-21 SWITCH, KEYBOARD (SHUFFLE) (S525D/S725D) 1-475-235-21 ENCODER, ROTARY (PREV = + NEXT) (S725D)
1-216-073-00 1-216-073-00 1-216-047-91 1-216-037-00
METAL CHIP METAL CHIP RES, CHIP METAL CHIP
10K 10K 820 330
5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W
< SWITCH > S071
1-771-349-21 SWITCH, KEYBOARD (I/u )
< VIBRATOR > < TRANSFORMER > X201
1-577-358-21 VIBRATOR, CERAMIC (4MHz) T001 A-6065-228-A FR-147 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-268-A FR-147 BOARD, COMPLETE (S325) A-6065-241-A FR-148 BOARD, COMPLETE (S725D: Australian) A-6065-251-A FR-149 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-218-A FR-150 BOARD, COMPLETE (S525D: Australian) ********************** (Ref. No. 4,000 Series)
* * * * *
A-6065-229-A HP-108 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-257-A HP-109 BOARD, COMPLETE (S725D: Australian) A-6065-252-A HP-110 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-234-A HP-111 BOARD, COMPLETE (S525D: Australian) ********************** (Ref. No. 2,000 Series)
* * * *
< CAPACITOR > C001 C002 C003 C004 C005
1-124-234-00 1-137-150-11 1-115-339-11 1-115-339-11 1-128-131-11
ELECT FILM CERAMIC CHIP CERAMIC CHIP ELECT
C051
1-164-004-11 CERAMIC CHIP
1-433-748-11 TRANSFORMER, DC-DC CONVERTER
< CAPACITOR > 22uF 0.01uF 0.1uF 0.1uF 22uF
20% 5% 10% 10% 20%
16V 100V 50V 50V 50V
C701
1-163-011-11 CERAMIC CHIP
0.0015uF 10%
C701
1-164-161-11 CERAMIC CHIP
0.0022uF 10%
C702
1-163-011-11 CERAMIC CHIP
0.0015uF 10%
0.1uF
10%
25V
C702
1-164-161-11 CERAMIC CHIP
0.0022uF 10%
8-21
50V (S725D) 100V (S525D) 50V (S725D) 100V (S525D)
HP-108 Ref. No.
HP-109
Part No.
HP-110
HP-111
Description
MB-82
Remark
Ref. No.
< CONNECTOR > * CN701
10%
25V
C206 C209 C210 C211 C212
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 25V 25V
C213 C304 C307 C309 C310
1-162-970-11 1-110-563-11 1-125-822-11 1-107-826-91 1-162-970-11
CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.068uF 10uF 0.1uF 0.01uF
10% 10% 20% 10% 10%
25V 16V 10V 16V 25V
C312 C313 C314 C315 C316
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 25V 25V
C317 C318 C319 C320 C321
1-162-970-11 1-162-970-11 1-125-822-11 1-162-970-11 1-126-206-11
CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP ELECT CHIP
0.01uF 0.01uF 10uF 0.01uF 100uF
10% 10% 20% 10% 20%
25V 25V 10V 25V 6.3V
(S525D: Australian)
C322 C323 C324 C325 C327
1-162-970-11 1-162-970-11 1-162-970-11 1-107-826-91 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.1uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 16V 25V
(S725D: Australian) A-6065-231-A MB-85 BOARD, COMPLETE (S525D: EXCEPT Russian, Australian) A-6065-232-A MB-85 BOARD, COMPLETE (S525D: Russian) A-6065-246-A MB-85 BOARD, COMPLETE (S725D: Russian)
C328 C329 C331 C333 C334
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 25V 25V
A-6065-254-A MB-85 BOARD, COMPLETE (S725D: EXCEPT E, Russian, Australian) A-6065-269-A MB-85 BOARD, COMPLETE (S325: EXCEPT Russian) A-6065-270-A MB-85 BOARD, COMPLETE (S325: Russian) A-6065-324-A MB-85 BOARD, COMPLETE (S725D: E12B) A-6065-387-A MB-85 BOARD, COMPLETE (S725D: E12S) ********************* (Ref. No. 1,000 Series)
C337 C338 C339 C341 C343
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 25V 25V
C344 C401 C402 C403 C404
1-162-927-11 1-125-822-11 1-126-209-11 1-107-826-91 1-107-826-91
CERAMIC CHIP TANTAL. CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP
100PF 10uF 100uF 0.1uF 0.1uF
5% 20% 20% 10% 10%
50V 10V 4V 16V 16V
1-564-013-11 PIN, CONNECTOR 3P
8-719-071-15 DIODE HZM6.8ZWA1TL 8-719-071-15 DIODE HZM6.8ZWA1TL
1-414-135-11 FERRITE 1-414-135-11 FERRITE 1-414-135-11 FERRITE
0uH 0uH 0uH
1-785-505-41 JACK, LARGE TYPE (PHONES) (S725D) 1-785-505-31 JACK, LARGE TYPE (PHONES) (S525D) < JUMPER RESISTOR >
JR701
1-216-295-91 SHORT
0 (S525D)
< VARIABLE RESISTOR > RV701
1-225-738-11 RES, VAR, CARBON 500/500 (LEVEL)
*
A-6065-235-A MB-82 BOARD, COMPLETE
*
A-6065-247-A MB-82 BOARD, COMPLETE
* * * * * * * *
Remark 0.01uF
< JACK > J701 J701
Description
1-162-970-11 CERAMIC CHIP
< FERRITE BEAD > FB701 FB702 FB703
Part No.
C204
< DIODE > D701 D702
MB-85
< CAPACITOR > C001 C002 C003 C004 C005
1-162-970-11 1-164-227-11 1-126-246-11 1-126-204-11 1-126-206-11
CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP ELECT CHIP
0.01uF 0.022uF 220uF 47uF 100uF
10% 10% 20% 20% 20%
25V 25V 4V 16V 6.3V
C405 C406 C408 C410 C411
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 25V 25V
C007 C008 C010 C011 C012
1-162-970-11 1-162-970-11 1-162-970-11 1-125-822-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 10uF 0.01uF
10% 10% 10% 20% 10%
25V 25V 25V 10V 25V
C413 C414 C415 C416 C418
1-162-970-11 1-125-822-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 10uF 0.01uF 0.01uF 0.01uF
10% 20% 10% 10% 10%
25V 10V 25V 25V 25V
C013 C015 C016 C017 C018
1-162-970-11 1-126-246-11 1-125-822-11 1-162-970-11 1-125-822-11
CERAMIC CHIP ELECT CHIP TANTAL. CHIP CERAMIC CHIP TANTAL. CHIP
0.01uF 220uF 10uF 0.01uF 10uF
10% 20% 20% 10% 20%
25V 4V 10V 25V 10V
C420 C422 C425 C426 C428
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 25V 25V
C019 C201 C202 C203
1-162-970-11 1-162-919-11 1-162-919-11 1-125-822-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP
0.01uF 22PF 22PF 10uF
10% 5% 5% 20%
25V 50V 50V 10V
C431 C432 C433 C434
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10%
25V 25V 25V 25V
8-22
MB-82 Ref. No.
Part No.
Description
Remark
Ref. No.
MB-85
Part No.
Description
C812 C813 C814 C815 C816
1-162-967-11 1-162-967-11 1-165-176-11 1-110-666-11 1-104-601-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP
0.0033uF 0.0033uF 0.047uF 22uF 10uF
10% 10% 10% 20% 20%
50V 50V 16V 6.3V 10V
C817 C818 C819 C820 C821
1-115-467-11 1-107-826-91 1-107-826-91 1-164-230-11 1-164-230-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.22uF 0.1uF 0.1uF 220PF 220PF
10% 10% 10% 5% 5%
10V 16V 16V 50V 50V
C822 C823 C824 C825 C830
1-126-204-11 1-162-970-11 1-162-970-11 1-162-970-11 1-107-826-91
ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
47uF 0.01uF 0.01uF 0.01uF 0.1uF
20% 10% 10% 10% 10%
16V 25V 25V 25V 16V
C831 C832 C833 C834 C835
1-107-826-91 1-107-826-91 1-164-677-11 1-164-677-11 1-107-826-91
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 0.033uF 0.033uF 0.1uF
10% 10% 10% 10% 10%
16V 16V 16V 16V 16V
C836 C837 C904
1-115-467-11 CERAMIC CHIP 1-115-467-11 CERAMIC CHIP 1-163-021-91 CERAMIC CHIP
0.22uF 0.22uF 0.01uF
C905 C906
1-163-021-91 CERAMIC CHIP 1-127-950-21 FILM CHIP
0.01uF 0.01uF
10% 10V 10% 10V 10% 50V (S525D/S725D) 10% 50V 5% 16.5V (S725D)
C906
1-164-004-11 CERAMIC CHIP
0.1uF
C907 C908
1-125-822-11 TANTAL. CHIP 1-128-391-11 ELECT CHIP
10uF 330uF
C909
1-127-950-21 FILM CHIP
0.01uF
C909
1-164-004-11 CERAMIC CHIP
0.1uF
C910 C911
1-125-822-11 TANTAL. CHIP 1-127-950-21 FILM CHIP
10uF 0.01uF
C911
1-163-021-91 CERAMIC CHIP
0.01uF
C912
1-127-516-11 ELECT
220uF
C913
1-127-950-21 FILM CHIP
0.01uF
C913
1-164-004-11 CERAMIC CHIP
0.1uF
50V 50V 50V 50V 25V
C914
1-125-822-11 TANTAL. CHIP
10uF
C916
1-127-950-21 FILM CHIP
0.01uF
C916
1-163-021-91 CERAMIC CHIP
0.01uF
20% 10% 10% 5% 5%
16V 16V 16V 50V 50V
C922
1-127-950-21 FILM CHIP
0.01uF
C922
1-164-004-11 CERAMIC CHIP
0.1uF
5% 5% 10% 10% 10%
50V 50V 16V 16V 16V
C923 C924
1-107-826-91 CERAMIC CHIP 1-125-822-11 TANTAL. CHIP
0.1uF 10uF
C925
1-162-970-11 CERAMIC CHIP
0.01uF
C436
1-162-970-11 CERAMIC CHIP
0.01uF
10%
25V
C438 C439 C440 C441 C443
1-162-970-11 1-125-822-11 1-125-822-11 1-126-209-11 1-162-970-11
CERAMIC CHIP TANTAL. CHIP TANTAL. CHIP ELECT CHIP CERAMIC CHIP
0.01uF 10uF 10uF 100uF 0.01uF
10% 20% 20% 20% 10%
25V 10V 10V 4V 25V
C502
1-162-970-11 CERAMIC CHIP
0.01uF
10%
C505
1-162-970-11 CERAMIC CHIP
0.01uF
C506
1-162-970-11 CERAMIC CHIP
0.01uF
C508
1-162-970-11 CERAMIC CHIP
0.01uF
C510
1-162-970-11 CERAMIC CHIP
0.01uF
C512
1-162-970-11 CERAMIC CHIP
0.01uF
C513
1-162-970-11 CERAMIC CHIP
0.01uF
C514
1-162-970-11 CERAMIC CHIP
0.01uF
C515
1-162-970-11 CERAMIC CHIP
0.01uF
C516
1-162-970-11 CERAMIC CHIP
0.01uF
C517
1-162-970-11 CERAMIC CHIP
0.01uF
10%
C601 C602 C603 C604
1-125-822-11 1-162-970-11 1-162-970-11 1-162-970-11
TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
10uF 0.01uF 0.01uF 0.01uF
20% 10% 10% 10%
25V (S725D) 10V 25V 25V 25V
C605 C606 C607 C608 C701
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 25V 25V
C702 C703 C704 C705 C706
1-162-970-11 1-107-826-91 1-107-826-91 1-165-176-11 1-165-176-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.1uF 0.1uF 0.047uF 0.047uF
10% 10% 10% 10% 10%
25V 16V 16V 16V 16V
C707 C708 C709 C710 C711
1-162-970-11 1-107-826-91 1-115-467-11 1-162-970-11 1-107-826-91
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.1uF 0.22uF 0.01uF 0.1uF
10% 10% 10% 10% 10%
25V 16V 10V 25V 16V
C712 C713 C714 C715 C717
1-162-968-11 1-162-968-11 1-162-968-11 1-162-968-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.0047uF 0.0047uF 0.0047uF 0.0047uF 0.01uF
10% 10% 10% 10% 10%
C801 C802 C803 C805 C806
1-126-204-11 1-107-826-91 1-107-826-91 1-162-923-11 1-162-923-11
ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
47uF 0.1uF 0.1uF 47PF 47PF
C807 C808 C809 C810 C811
1-162-927-11 1-162-927-11 1-110-563-11 1-110-563-11 1-165-176-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
100PF 100PF 0.068uF 0.068uF 0.047uF
25V (S725D) 10% 25V (S525D/S725D) 10% 25V (S525D/S725D) 10% 25V (S525D/S725D) 10% 25V (S525D/S725D) 10% 25V (S525D/S725D) 10% 25V (S725D) 10% 25V (S725D) 10% 25V (S725D) 10% 25V (S725D)
8-23
Remark
10% 25V (S325/S525D) 20% 10V 20% 6.3V (S325/S525D) 5% 16.5V (S725D) 10% 25V (S325/S525D) 20% 5%
10V 16.5V (S725D) 10% 50V (S325/S525D) 20% 10V (S725D) 5% 16.5V (S725D) 10%
25V (S525D) 20% 10V (S525D/S725D) 5% 16.5V (S725D) 10% 50V (S525D) 5% 16.5V (S725D) 10%
25V (S525D) 10% 16V 20% 10V (S525D/S725D) 10% 25V (S525D/S725D)
MB-82 Ref. No.
MB-85
Part No.
Description
Remark
Ref. No.
C926
1-107-826-91 CERAMIC CHIP
0.1uF
10% 16V (S525D/S725D)
C927
1-125-822-11 TANTAL. CHIP
10uF
C928
1-128-391-11 ELECT CHIP
330uF
C929
1-162-970-11 CERAMIC CHIP
0.01uF
C931
1-107-826-91 CERAMIC CHIP
0.1uF
C932
1-125-822-11 TANTAL. CHIP
10uF
20% 10V (S525D/S725D) 20% 6.3V (S525D/S725D) 10% 25V (S525D/S725D) 10% 16V (S525D/S725D) 20% 10V (S525D/S725D)
C933
1-162-970-11 CERAMIC CHIP
0.01uF
C934
1-107-826-91 CERAMIC CHIP
0.1uF
C935
1-125-822-11 TANTAL. CHIP
10uF
C937
1-162-970-11 CERAMIC CHIP
0.01uF
C939
1-107-826-91 CERAMIC CHIP
0.1uF
C940
1-125-822-11 TANTAL. CHIP
10uF
10% 25V (S525D/S725D) 10% 16V (S525D/S725D) 20% 10V (S525D/S725D) 10% 25V (S525D/S725D) 10% 16V (S525D/S725D) 20% 10V (S525D/S725D)
< CONNECTOR > CN001 CN002 CN003 CN004 CN005
1-785-728-21 1-779-936-11 1-779-936-11 1-778-772-11 1-784-327-11
PIN (PC BOARD), CONNECTOR 7P CONNECTOR, FFC/FPC 18P CONNECTOR, FFC/FPC 18P CONNECTOR, FFC/FPC 7P CONNECTOR, FFC/FPC 28P
CN006 CN007 CN010 CN011 * CN012
1-774-768-11 1-778-274-11 1-573-806-21 1-573-806-21 1-573-768-21
CONNECTOR, FFC/FPC 17P CONNECTOR, FFC/FPC 13P (S525D/S725D) PIN, CONNECTOR (1.5mm) (SMD) 6P PIN, CONNECTOR (1.5mm) (SMD) 6P PIN, CONNECTOR (1.5mm) (SMD) 5P < DIODE >
D701 D801 D802 D803 D804
8-719-988-61 8-719-941-09 8-719-988-61 8-719-941-09 8-719-941-86
DIODE DIODE DIODE DIODE DIODE
1SS355TE-17 DAP202U 1SS355TE-17 DAP202U DAN202U
D805 D806 D807
8-719-941-86 DIODE DAN202U 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17
Part No.
Description
Remark
FB015
1-469-116-21 FERRITE
0uH
FB016 FB017 FB018 FB019 FB020
1-216-801-11 1-469-116-21 1-469-116-21 1-469-116-21 1-469-116-21
METAL CHIP FERRITE FERRITE FERRITE FERRITE
22 0uH 0uH 0uH 0uH
FB021 FB022 FB024 FB026 FB028
1-469-116-21 1-216-829-11 1-469-116-21 1-216-829-11 1-469-116-21
FERRITE METAL CHIP FERRITE METAL CHIP FERRITE
0uH 4.7K 0uH 4.7K 0uH
FB029 FB030 FB031 FB032 FB033
1-469-324-21 1-469-116-21 1-469-116-21 1-469-116-21 1-469-116-21
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH 0uH
FB035 FB037 FB040 FB043 FB047
1-216-829-11 1-216-829-11 1-469-116-21 1-500-283-11 1-469-116-21
METAL CHIP METAL CHIP FERRITE INDUCTOR CHIP FERRITE
4.7K 4.7K 0uH 0uH 0uH
FB049 FB051 FB053 FB054 FB055
1-469-116-21 1-469-116-21 1-500-283-11 1-500-283-11 1-500-283-11
FERRITE FERRITE INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP
0uH 0uH 0uH 0uH 0uH
FB056 FB058 FB060 FB061 FB063
1-500-283-11 1-500-283-11 1-500-283-11 1-469-116-21 1-216-829-11
INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP FERRITE METAL CHIP
0uH 0uH 0uH 0uH (S525D/S725D) 4.7K 5% 1/16W (S525D/S725D)
FB065 FB067
1-469-116-21 FERRITE 1-216-829-11 METAL CHIP
FB069 FB071
1-469-116-21 FERRITE 1-216-829-11 METAL CHIP
FB073
1-469-116-21 FERRITE
0uH (S525D/S725D) 4.7K 5% 1/16W (S525D/S725D) 0uH (S525D/S725D) 4.7K 5% 1/16W (S525D/S725D) 0uH (S525D/S725D)
FB075
1-216-829-11 METAL CHIP
4.7K
FB077 FB078
1-469-116-21 FERRITE 1-216-801-11 METAL CHIP
FB080 FB081
1-216-801-11 METAL CHIP 1-216-801-11 METAL CHIP
5% 1/16W (S525D/S725D) 0uH (S525D/S725D) 22 5% 1/16W (S525D/S725D) 22 5% 1/16W 22 5% 1/16W
FB083 FB084 FB085 FB086
1-216-801-11 1-216-801-11 1-216-801-11 1-216-801-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP
22 22 22 22
5% 5% 5% 5%
FB087
1-216-801-11 METAL CHIP
22
5%
FB088
1-216-801-11 METAL CHIP
22
5% 1/16W (S525D/S725D)
FB105 FB106
1-469-324-21 FERRITE 1-469-324-21 FERRITE
0uH 0uH
5%
1/16W
5%
1/16W
5%
1/16W
5% 5%
1/16W 1/16W
< FERRITE BEAD > FB001 FB002 FB003 FB004 FB005
1-469-324-21 1-469-324-21 1-469-324-21 1-469-324-21 1-469-324-21
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH 0uH
FB006 FB007 FB008 FB009 FB010
1-469-324-21 1-469-324-21 1-469-324-21 1-469-116-21 1-469-116-21
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH (EXCEPT Australian) 0uH
FB011 FB012 FB013 FB014
1-469-116-21 1-469-116-21 1-469-116-21 1-469-116-21
FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH (EXCEPT Australian) 0uH
< FILTER > FL001 FL002 FL003
8-24
1-234-177-21 FILTER, CHIP EMI 1-234-177-21 FILTER, CHIP EMI 1-233-893-21 FILTER, CHIP EMI
1/16W 1/16W 1/16W 1/16W (S725D) 1/16W
MB-82 Ref. No.
Part No.
Description
FL004 FL005
1-233-893-21 FILTER, CHIP EMI 1-234-177-21 FILTER, CHIP EMI
FL006 FL008 FL009 FL010 FL014
1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21
FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI
FL015 FL016 FL202 FL203 FL204
1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21
FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI
FL205 FL301 FL302 FL303 FL401
1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21
FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI
FL402 FL403 FL404 FL405 FL501
1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21
FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI (S725D)
FL502 FL503 FL601 FL602 FL701
1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21
FILTER, CHIP EMI (S525D/S725D) FILTER, CHIP EMI (S725D) FILTER, CHIP EMI FILTER, CHIP EMI (S725D) FILTER, CHIP EMI
FL904
1-234-177-21 FILTER, CHIP EMI (S525D/S725D)
Remark
Ref. No. IC902 IC904 IC905 IC906 IC907
Part No.
Description
8-759-572-26 8-759-052-52 8-759-572-26 8-759-572-26 8-759-572-26
IC IC IC IC IC
MB-85 Remark
CXD8799N-T2 L78M05T-FA CXD8799N-T2 (S525D/S725D) CXD8799N-T2 (S525D/S725D) CXD8799N-T2 (S525D/S725D)
< COIL > L001 L402
1-414-754-11 INDUCTOR 1-414-754-11 INDUCTOR
10uH 10uH
< TRANSISTOR > Q801 Q802 Q803
8-729-015-74 TRANSISTOR UN5111-TX 8-729-230-63 TRANSISTOR 2SC4116-YG 8-729-230-63 TRANSISTOR 2SC4116-YG < RESISTOR >
< IC >
R001 R002 R003 R004 R005
1-216-833-11 1-216-833-11 1-216-833-11 1-216-821-11 1-216-821-11
RES, CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
10K 10K 10K 1K 1K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R006 R007 R009 R010 R014
1-216-821-11 1-216-864-11 1-216-864-11 1-216-801-11 1-216-801-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
1K 0 0 22 22
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R036 R037 R040
1-216-821-11 METAL CHIP 1-216-825-11 METAL CHIP 1-216-864-11 METAL CHIP
1K 2.2K 0
5% 5% 5%
R044 R045
1-216-829-11 METAL CHIP 1-216-833-11 RES, CHIP
4.7K 10K
5% 5%
1/16W 1/16W 1/16W (Australian) 1/16W 1/16W
R053 R202 R203 R204 R205
1-216-833-11 1-216-801-11 1-216-833-11 1-216-833-11 1-216-845-11
RES, CHIP METAL CHIP RES, CHIP RES, CHIP METAL CHIP
10K 22 10K 10K 100K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R206 R207 R212 R213 R217
1-216-845-11 1-216-833-11 1-216-813-11 1-216-801-11 1-216-833-11
METAL CHIP RES, CHIP METAL CHIP METAL CHIP RES, CHIP
100K 10K 220 22 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
IC001 IC003 IC004 IC005 IC201
8-759-567-31 8-759-531-92 8-759-531-92 8-759-486-55 8-759-469-25
IC IC IC IC IC
PLL1700E/2K TC7WH04FU (TE12R) TC7WH04FU (TE12R) NJM2370U33-TE2 AK6440AF-E2
IC202 IC203 IC204 IC205 IC205
8-759-599-39 8-759-580-60 8-759-573-65 8-759-593-83 8-759-594-03
IC IC IC IC IC
MB91101APFV-G-BND SN74AHCT08PWR IDT71V016S20PHAU-TL MBM29LV160B-210B-20 (S325) MBM29LV160B-230B-20 (S525D)
IC206 IC206 IC207 IC302 IC303
8-759-640-51 IC MR27V1602D-18MAZ060 (S725D: E) 8-759-644-24 IC MR27V1602D-24MAZ060 (S725D: EXCEPT E) 8-759-427-92 IC PST9126NL 8-759-486-55 IC NJM2370U33-TE2 8-759-567-27 IC CXD8784R
R222 R223 R225 R226 R227
1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11 1-216-813-11
RES, CHIP RES, CHIP RES, CHIP RES, CHIP METAL CHIP
10K 10K 10K 10K 220
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
IC304 IC401 IC402 IC403 IC404
8-759-567-35 8-752-398-60 8-759-567-34 8-759-567-34 8-759-486-55
IC IC IC IC IC
KM416V1200CT-L6T CXD1930BQ KM416S1020CT-G10T KM416S1020CT-G10T NJM2370U33-TE2
R228 R229 R230 R231 R232
1-216-813-11 1-216-813-11 1-216-813-11 1-216-813-11 1-216-813-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
220 220 220 220 220
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
IC501 IC502 IC601 IC602 IC701
8-752-400-43 8-752-390-12 8-759-567-30 8-759-567-55 8-759-598-87
IC IC IC IC IC
CXD1901AR (S525D/S725D) CXD1857Q (S725D) CXD8788Q KM29V16000AT-T (S725D) CXD8791AQ
R235 R237
1-216-864-11 METAL CHIP 1-216-216-00 RES, CHIP
0 5.6K
5% 5%
IC702 IC801 IC802 IC803
8-759-337-40 8-759-522-13 8-759-567-26 8-759-338-78
IC IC IC IC
NJM2904V (TE2) BA5981FP-E2 BA5983FP-E2 BA10324AFV-E2
R237 R237 R237
8-25
1/16W 1/8W (E12B) 1-216-220-00 RES, CHIP 8.2K 5% 1/8W (Australian) 1-216-224-91 RES, CHIP 12K 5% 1/8W (S525D: Russian/S725D: Russian) 1-216-230-00 RES, CHIP 22K 5% 1/8W (S525D: EXCEPT Russian, Australian/ S725D: EXCEPT Russian, Australian, E12B)
MB-82 Ref. No.
MB-85
Part No.
Description
Remark
Ref. No.
R237
1-216-238-91 RES, CHIP
R237
1-216-246-00 RES, CHIP
R238
1-216-224-91 RES, CHIP
R238
1-216-238-91 RES, CHIP
R239
1-216-224-91 RES, CHIP
R239
1-216-230-00 RES, CHIP
R239
1-216-246-00 RES, CHIP
R240
1-216-216-00 RES, CHIP
R240
1-216-220-00 RES, CHIP
R240
1-216-224-91 RES, CHIP
R240
1-216-230-00 RES, CHIP 22K 5% 1/8W (S525D: EXCEPT Russian, Auatralian/ S725D: EXCEPT Russian, Auatralian, E12B) 1-216-238-91 RES, CHIP 47K 5% 1/8W (S325: Russian) 1-216-246-00 RES, CHIP 100K 5% 1/8W (S325: EXCEPT Russian) 1-216-224-91 RES, CHIP 12K 5% 1/8W (S725D) 1-216-238-91 RES, CHIP 47K 5% 1/8W (S525D)
R240 R240 R241 R241
47K
5% 1/8W (S325: Russian) 100K 5% 1/8W (S325: EXCEPT Russian) 12K 5% 1/8W (S725D) 47K 5% 1/8W (S525D) 12K 5% 1/8W (Russian, E12B) 22K
5%
1/8W (Australian) 100K 5% 1/8W (EXCEPT Russian, Australian, E12B) 5.6K 5% 1/8W (E12B) 8.2K 5% 1/8W (Australian) 12K 5% 1/8W (S525D: Russian/S725D: Russian)
Part No.
Description
R403 R404 R405 R406
1-216-833-11 1-216-864-11 1-216-827-11 1-216-822-11
RES, CHIP METAL CHIP METAL CHIP METAL CHIP
10K 0 3.3K 1.2K
5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W
Remark
R407 R409 R410 R411 R412
1-216-833-11 1-216-864-11 1-216-821-11 1-216-833-11 1-216-809-11
RES, CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP
10K 0 1K 10K 100
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R426 R427 R428 R429 R430
1-216-813-11 1-216-813-11 1-216-813-11 1-216-813-11 1-216-813-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
220 220 220 220 220
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R431 R501
1-216-813-11 METAL CHIP 1-216-809-11 METAL CHIP
220 100
5% 5%
R502
1-216-806-11 RES, CHIP
56
R519
1-216-809-11 METAL CHIP
100
R520
1-216-833-11 RES, CHIP
10K
R521
1-216-833-11 RES, CHIP
10K
R522
1-216-833-11 RES, CHIP
10K
R527 R528 R529
1-216-833-11 RES, CHIP 1-216-833-11 RES, CHIP 1-216-864-11 METAL CHIP
10K 10K 0
R530
1-216-864-11 METAL CHIP
0
R536
1-216-864-11 METAL CHIP
0
R537
1-216-806-11 RES, CHIP
56
R538
1-216-864-11 METAL CHIP
0
R539
1-216-864-11 METAL CHIP
0
1/16W 1/16W (S725D) 5% 1/16W (S325) 5% 1/16W (S525D/S725D) 5% 1/16W (S525D/S725D) 5% 1/16W (S525D/S725D) 5% 1/16W (S525D/S725D) 5% 1/16W 5% 1/16W 5% 1/16W (S325)
R305 R306 R307 R308 R309
1-218-879-11 1-218-831-11 1-218-883-11 1-216-825-11 1-216-838-11
RES, CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
22K 220 33K 2.2K 27K
0.50% 0.50% 0.50% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R310 R313 R314 R315 R316
1-216-825-11 1-216-833-11 1-216-833-11 1-216-833-11 1-218-855-11
METAL CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
2.2K 10K 10K 10K 2.2K
5% 5% 5% 5% 0.50%
1/16W 1/16W 1/16W 1/16W 1/16W
R317 R318 R319 R320 R321
1-218-871-11 1-216-849-11 1-216-831-11 1-218-853-11 1-218-847-11
RES, CHIP METAL CHIP METAL CHIP RES, CHIP RES, CHIP
10K 220K 6.8K 1.8K 1K
0.50% 5% 5% 0.50% 0.50%
1/16W 1/16W 1/16W 1/16W 1/16W
R540
1-216-864-11 METAL CHIP
0
R541
1-216-864-11 METAL CHIP
0
R543
1-216-864-11 METAL CHIP
0
R322 R323 R324 R325 R326
1-218-871-11 1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11
RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
10K 10K 10K 10K 10K
0.50% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R544
1-216-864-11 METAL CHIP
0
R604
1-216-833-11 RES, CHIP
10K
R327 R328 R329 R330 R331
1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11
RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
10K 10K 10K 10K 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R605 R606 R630 R631 R632
1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11
RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
10K 10K 10K 10K 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R332 R337 R338 R339 R340
1-216-833-11 1-216-809-11 1-216-833-11 1-216-833-11 1-216-833-11
RES, CHIP METAL CHIP RES, CHIP RES, CHIP RES, CHIP
10K 100 10K 10K 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R633 R634 R635 R636 R637
1-216-833-11 1-216-833-11 1-216-833-11 1-216-815-11 1-216-809-11
RES, CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
10K 10K 10K 330 100
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R341
1-216-809-11 METAL CHIP
100
5%
1/16W
R638 R639
1-216-809-11 METAL CHIP 1-216-809-11 METAL CHIP
100 100
5% 5%
1/16W 1/16W
8-26
5% 1/16W (S525D/S725D) 5% 1/16W (S325) 5% 1/16W (S525D/S725D) 5% 1/16W (S325) 5% 1/16W (S525D/S725D) 5% 1/16W (S525D/S725D) 5% 1/16W (S525D/S725D) 5% 1/16W (S525D/S725D) 5% 1/16W (S525D/S725D) 5% 1/16W (S725D)
MB-82 Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
MB-85
MS-29
Description
Remark
R640 R641 R642
1-216-809-11 METAL CHIP 1-216-809-11 METAL CHIP 1-216-809-11 METAL CHIP
100 100 100
5% 5% 5%
1/16W 1/16W 1/16W
R837 R838 R839
1-216-844-11 METAL CHIP 1-216-848-11 METAL CHIP 1-216-848-11 METAL CHIP
82K 180K 180K
5% 5% 5%
1/16W 1/16W 1/16W
R643 R647 R701 R702 R703
1-216-815-11 1-216-833-11 1-216-805-11 1-216-817-11 1-216-817-11
METAL CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP
330 10K 47 470 470
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R840 R841 R842 R843 R844
1-216-848-11 1-216-843-11 1-216-844-11 1-216-844-11 1-216-843-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
180K 68K 82K 82K 68K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R704 R705 R706 R707 R708
1-216-817-11 1-216-817-11 1-216-821-11 1-216-844-11 1-216-844-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
470 470 1K 82K 82K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R845 R846 R847 R851 R852
1-216-843-11 1-216-841-11 1-216-296-91 1-216-833-11 1-216-833-11
METAL CHIP METAL CHIP SHORT RES, CHIP RES, CHIP
68K 47K 0 10K 10K
5% 5%
1/16W 1/16W
5% 5%
1/16W 1/16W
R709 R710 R711 R712 R720
1-216-844-11 1-216-844-11 1-216-833-11 1-216-839-11 1-216-821-11
METAL CHIP METAL CHIP RES, CHIP METAL CHIP METAL CHIP
82K 82K 10K 33K 1K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R853 R854 R855 R856 R857
1-216-833-11 1-216-833-11 1-216-834-11 1-216-836-11 1-218-899-11
RES, CHIP RES, CHIP METAL CHIP METAL CHIP RES, CHIP
10K 10K 12K 18K 150K
5% 5% 5% 5% 0.50%
1/16W 1/16W 1/16W 1/16W 1/16W
R721 R722 R748 R751 R752
1-216-821-11 1-216-801-11 1-216-833-11 1-216-821-11 1-216-821-11
METAL CHIP METAL CHIP RES, CHIP METAL CHIP METAL CHIP
1K 22 10K 1K 1K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R858 R859 R860 R861 R864
1-218-899-11 1-218-889-11 1-218-889-11 1-216-296-91 1-216-138-00
RES, CHIP RES, CHIP RES, CHIP SHORT METAL CHIP
150K 56K 56K 0 3.3
0.50% 1/16W 0.50% 1/16W 0.50% 1/16W 5%
1/8W
R755 R757 R758 R801 R802
1-216-830-11 1-216-864-11 1-216-864-11 1-216-841-11 1-216-841-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
5.6K 0 0 47K 47K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R865 R866 R867 R868 R869
1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11
RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
10K 10K 10K 10K 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R803 R804 R805 R806 R807
1-216-841-11 1-216-841-11 1-216-840-11 1-216-840-11 1-216-835-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
47K 47K 39K 39K 15K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R870 R871 R872 R873 R909
1-216-815-11 1-216-817-11 1-216-815-11 1-216-821-11 1-216-809-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
330 470 330 1K 100
5% 1/16W 5% 1/16W 5% 1/16W 5% 1/16W 5% 1/16W (S525D/S725D)
R808 R809 R810 R811 R812
1-216-835-11 1-216-844-11 1-216-844-11 1-218-907-11 1-218-895-11
METAL CHIP METAL CHIP METAL CHIP RES, CHIP RES, CHIP
15K 82K 82K 330K 100K
5% 5% 5% 0.50% 0.50%
1/16W 1/16W 1/16W 1/16W 1/16W
R912
1-216-809-11 METAL CHIP
100
R915 R918
1-216-809-11 METAL CHIP 1-216-809-11 METAL CHIP
100 100
5% 1/16W (S525D/S725D) 5% 1/16W 5% 1/16W (S525D/S725D)
R813 R814 R815 R816 R817
1-218-895-11 1-218-907-11 1-216-836-11 1-216-845-11 1-216-852-11
RES, CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP
100K 330K 18K 100K 390K
0.50% 0.50% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R818 R819 R820 R821 R822
1-216-852-11 1-216-849-11 1-216-851-11 1-216-840-11 1-216-845-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
390K 220K 330K 39K 100K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R823 R824 R825 R826 R827
1-216-833-11 1-216-833-11 1-216-830-11 1-216-830-11 1-216-851-11
RES, CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP
10K 10K 5.6K 5.6K 330K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R828 R829 R831 R832 R834
1-216-837-11 1-216-837-11 1-216-833-11 1-216-833-11 1-216-847-11
METAL CHIP METAL CHIP RES, CHIP RES, CHIP METAL CHIP
22K 22K 10K 10K 150K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R835 R836
1-216-847-11 METAL CHIP 1-216-847-11 METAL CHIP
150K 150K
5% 5%
1/16W 1/16W
< COMPOSITION CIRCUIT BLOCK > * * * * *
RB201 RB202 RB203 RB204 RB601
1-233-270-11 1-233-270-11 1-233-270-11 1-233-270-11 1-233-270-11
NETWORK, RES (8 GANG) 10K NETWORK, RES (8 GANG) 10K NETWORK, RES (8 GANG) 10K NETWORK, RES (8 GANG) 10K NETWORK, RES (8 GANG) 10K < VARIABLE RESISTOR >
RV401
1-223-583-11 RES, ADJ, CARBON 1K < VIBRATOR >
X001 X201
1-781-188-21 OSCILLATOR, CRYSTAL (27MHz) 1-781-185-21 VIBRATOR, CERAMIC (12.5MHz)
A-6066-012-A MS-29 BOARD, COMPLETE ********************** (Ref. No. 3,000 Series)
*
< CONNECTOR > CN001
8-27
1-564-722-11 PIN, CONNECTOR (SMALL TYPE) 6P
MB-29 Ref. No.
POWER BLOCK
Part No.
RY-12
Description
SW-314 Remark
< SWITCH > S001 S002
SW-316
Ref. No.
Part No.
! P511 ! P611
1-533-589-11 IC LINK 750mA 9-884-090-01 IC LINK 1.5A
SW-317
Description
Remark
< PHOTO COUPLER >
1-771-562-11 SWITCH, LEVER (TRAY SENSOR) 1-762-386-11 SWITCH, PUSH (CHUCK SENSOR)
1-468-359-11 POWER BLOCK (HS-030SH) ********************** (Ref.No. 6,000 Series)
*
SW-315
! PC101 ! PC102 ! PC103
< TRANSISTOR >
< CAPACITOR > C110 C131 C132 C186 C211
9-884-088-01 1-126-964-11 1-126-960-11 1-107-967-11 1-111-087-11
ELECT ELECT ELECT ELECT ELECT
56uF 10uF 1uF 1uF 330uF
400V 50V 50V 400V 35V
C213 C301 C311 C313 C401
1-126-947-11 1-126-960-11 1-111-087-11 1-126-947-11 1-126-948-11
ELECT ELECT ELECT ELECT ELECT
47uF 1uF 330uF 47uF 100uF
35V 50V 35V 35V 35V
C402 C511 C512 C611 C613
1-126-960-11 1-126-942-11 1-126-947-11 1-111-090-11 1-126-947-11
ELECT ELECT ELECT ELECT ELECT
1uF 1000uF 47uF 560uF 47uF
50V 25V 35V 35V 35V
8-749-010-59 PHOTO COUPLER TLP721F 8-749-010-59 PHOTO COUPLER TLP721F 8-749-010-59 PHOTO COUPLER TLP721F
Q101 Q102 Q103 Q131 Q181
9-880-450-01 8-729-023-98 9-880-450-01 8-729-023-98 8-729-046-40
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
2SK2333 2SC3377 2SK2333 2SC3377 2SK2663
Q182 Q183
8-729-023-98 TRANSISTOR 2SC3377 8-729-046-40 TRANSISTOR 2SK2663 < RESISTOR >
R152
1-219-121-21 FUSIBLE
0.22
1/4W F
< TRANSFORMER > ! T101 ! T102
9-884-091-01 TRANSFORMER OM-98024 9-884-092-01 TRANSFORMER OM-98060
*
A-6065-255-A RY-12 BOARD, COMPLETE (S725D) ********************* (Ref. No. 2,000 Series)
< DIODE > D101 D102 D104 D105 D131
9-884-089-01 8-719-160-68 8-719-109-57 9-980-073-01 9-980-073-01
DIODE DIODE DIODE DIODE DIODE
S1WBA60 RD18FB2 RD2.4ESB2 1SS270A 1SS270A
D132 D133 D135 D182 D183
9-980-073-01 8-719-109-60 9-980-073-01 8-719-109-60 9-980-073-01
DIODE DIODE DIODE DIODE DIODE
1SS270A RD2.7ESB2 1SS270A RD2.7ESB2 1SS270A
D184 D185 D211 D212 D311
9-880-435-01 8-719-160-68 8-719-027-43 8-719-160-78 8-719-200-59
DIODE DIODE DIODE DIODE DIODE
D1N60 RD18FB2 S2L20U RD24FB2 21DQ04
D401 D402 D511 D611
8-719-210-21 8-719-110-02 8-719-027-43 8-719-500-50
DIODE DIODE DIODE DIODE
11EQS04 RD7.5ESB1 S2L20U D3S4M
< CONNECTOR > * CN101 * CN201 * CN202
1-580-230-21 PIN, CONNECTOR (PC BOARD) 2P 1-691-960-11 PIN, CONNECTOR (PC BOARD) 3P 1-564-001-11 PIN, CONNECTOR 2P < DIODE >
D101
8-719-911-19 DIODE 1SS119 < RELAY >
! RY101
1-755-318-11 RELAY, POWER
*
A-6065-230-A SW-314 BOARD, COMPLETE (S525D: EXCEPT Auatralian) A-6065-243-A SW-315 BOARD, COMPLETE (S725D: Australian) A-6065-253-A SW-316 BOARD, COMPLETE (S725D: EXCEPT Auatralian) A-6065-221-A SW-317 BOARD, COMPLETE (S525D: Australian) ********************** (Ref. No. 4,000 Series)
* * *
< FUSE > ! F101
1-532-503-31 FUSE (1.6A/250V) < IC >
IC301 IC401
< CONNECTOR >
8-759-420-19 IC AN1431T 8-759-420-19 IC AN1431T
CN099
1-785-539-21 CONNECTOR, BOARD TO BOARD 4P < DIODE >
< IC LINK > ! P211 ! P311
D098 D098
1-533-588-11 IC LINK 500mA 1-533-593-11 IC LINK 2A
8-28
8-719-056-06 DIODE SLR-342DCT31 (VES) (S525D) 8-719-056-06 DIODE SLR-342DCT31 (VIRTUAL 3D SURROUND) (S725D) The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
SW-314 Ref. No.
Part No.
Description
SW-315 Remark
SW-316
Ref. No.
Part No.
SW-317
TK-51
TK-54
Description
Remark
< CONNECTOR > < TRANSISTOR > Q098
CN001 CN002 CN003 CN004
8-729-421-22 TRANSISTOR UN2211 < RESISTOR >
R098
1-216-041-00 METAL CHIP
470
5%
CONNECTOR, FFC/FPC (ZIF) 23P CONNECTOR, FPC (ZIF) 13P CONNECTOR, FFC/FPC 18P CONNECTOR, FFC/FPC 18P < DIODE >
1/10W D003
< SWITCH > S098 S098
1-785-700-21 1-566-529-11 1-785-699-21 1-785-699-21
8-719-988-61 DIODE 1SS355TE-17 < IC >
1-771-349-21 SWITCH, KEYBOARD (VES) (S525D) 1-771-349-21 SWITCH, KEYBOARD (VIRTUAL 3D SURROUND) (S725D)
IC001
8-759-567-24 IC SSI33P3722 < COIL >
A-6065-214-A TK-51 BOARD, COMPLETE (Australian) A-6065-256-A TK-54 BOARD, COMPLETE (EXCEPT Australian) ********************* (Ref. No. 2,000 Series)
* *
L001
< TRANSISTOR > Q001 Q002
< CAPACITOR > C004 C005 C006 C007 C008
1-107-826-91 1-162-966-11 1-124-779-00 1-162-966-11 1-162-966-11
CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.0022uF 10uF 0.0022uF 0.0022uF
10% 10% 20% 10% 10%
16V 50V 16V 50V 50V
C009 C010 C011 C012 C013
1-162-966-11 1-107-826-91 1-162-919-11 1-124-779-00 1-162-919-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP
0.0022uF 0.1uF 22PF 10uF 22PF
10% 10% 5% 20% 5%
50V 16V 50V 16V 50V
C014 C015 C016 C017 C018
1-162-919-11 1-162-919-11 1-162-970-11 1-164-172-11 1-164-739-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
22PF 22PF 0.01uF 0.0056uF 560PF
5% 5% 10% 10% 5%
50V 50V 25V 25V 50V
C019 C020 C021 C022 C023
1-164-172-11 1-107-826-91 1-107-826-91 1-107-826-91 1-165-176-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.0056uF 0.1uF 0.1uF 0.1uF 0.047uF
10% 10% 10% 10% 10%
25V 16V 16V 16V 16V
C024 C025 C026 C027 C028
1-164-730-11 1-165-176-11 1-162-964-11 1-164-217-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.0012uF 0.047uF 0.001uF 150PF 0.01uF
10% 10% 10% 5% 10%
50V 16V 50V 50V 25V
C029 C030 C031 C032 C033
1-107-826-91 1-107-826-91 1-124-779-00 1-107-826-91 1-107-826-91
CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 10uF 0.1uF 0.1uF
10% 10% 20% 10% 10%
16V 16V 16V 16V 16V
C034 C035 C036 C037 C038
1-107-826-91 1-107-826-91 1-165-176-11 1-164-739-11 1-107-826-91
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 0.047uF 560PF 0.1uF
10% 10% 10% 5% 10%
16V 16V 16V 50V 16V
C039 C040 C041
1-107-826-91 CERAMIC CHIP 1-162-969-11 CERAMIC CHIP 1-162-966-11 CERAMIC CHIP
0.1uF 10% 0.0068uF 10% 0.0022uF 10%
16V 25V 50V
1-412-031-11 INDUCTOR CHIP 47uH
8-729-903-46 TRANSISTOR 2SB1132-T100-QR 8-729-015-76 TRANSISTOR UN5211-TX < RESISTOR >
R001 R002 R003 R004 R005
1-216-815-11 1-216-809-11 1-216-809-11 1-216-837-11 1-216-013-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
330 100 100 22K 33
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/10W
R006 R007 R008 R009 R010
1-216-013-00 1-216-841-11 1-216-797-11 1-216-834-11 1-216-833-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP
33 47K 10 12K 10K
5% 5% 5% 5% 5%
1/10W 1/16W 1/16W 1/16W 1/16W
R012 R014 R015 R016 R017
1-216-864-11 1-216-864-11 1-216-833-11 1-216-833-11 1-216-829-11
METAL CHIP METAL CHIP RES, CHIP RES, CHIP METAL CHIP
0 0 10K 10K 4.7K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R018 R022 R023 R025 R026
1-216-833-11 1-216-811-11 1-216-820-11 1-216-813-11 1-216-864-11
RES, CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 150 820 220 0
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R029
1-216-861-11 METAL CHIP
2.2M
5%
1/16W
MISCELLANEOUS ************** 115 117 127 153 154
1-418-097-11 1-771-564-11 1-790-167-11 1-790-166-11 1-790-163-11
155
1-790-164-11 CABLE, FLEXIBLE FLAT (FMA-8) (S525D/S725D) 1-790-165-11 CABLE, FLEXIBLE FLAT (FMA-9) (S525D/S725D) 1-769-744-91 CORD, POWER (EXCEPT Auatralian) 1-790-588-11 CORD, POWER (Australian)
156 !161 ! 161
8-29
ENCODER, ROTARY (S525D/S725D) SWITCH, TACTILE (S325) CABLE, FLEXIBLE FLAT (FMF-35) CABLE, FLEXIBLE FLAT (FMT-25) CABLE, FLEXIBLE FLAT (FMA-7)
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
Ref. No.
Part No.
Description
Remark
166
1-790-168-11 CABLE, FLEXIBLE FLAT (FEA-4) (S725D: EXCEPT Auatralian)
166
1-790-408-11 CABLE, FLEXIBLE FLAT (FME-4) (S325/S525D: EXCEPT Auatralian) 8-820-081-03 OPTICAL PICK-UP KHM-220AAA/J1RP 1-541-632-11 MOTOR, DC (LOADING) 1-431-175-21 TRANSFORMER, POWER (S725D)
! 220 M001 ! T901
Ref. No.
************** HARDWARE LIST ************** #1 #2 #3
7-685-885-09 SCREW +BVTT 4X16 (S) (S725D) 7-621-775-10 SCREW +B 2.6X4 7-685-136-19 SCREW +BTP 2.6X12 TYPE2 N-S
ACCESSORIES & PACKING MATERIALS ******************************** 1-418-320-31 COMMANDER, STANDARD (RMT-D108P) (S525D: EXCEPT Australian) 1-418-320-71 COMMANDER, STANDARD (RMT-D109P) (S325) 1-418-320-81 COMMANDER, STANDARD (RMT-D108O) (S525D: Australian) 1-418-321-31 COMMANDER, STANDARD (RMT-D111P) (S725D: EXCEPT Australian) 1-418-321-81 COMMANDER, STANDARD (RMT-D111O) (S725D: Australian)
!
1-575-334-11 CORD, CONNECTION (STEREO AV CABLE 1.5m) (S325/S525D) 1-575-334-41 CORD, CONNECTION (STEREO AV CABLE 1.5m) (S725D) 1-575-335-21 CORD, CONNECTION (S-VIDEO CABLE 1.5m) (S325/S525D) 1-770-019-11 ADAPTOR, CONVERSION PLUG 3P (EXCEPT Russian, Australian) 1-776-078-31 CORD, CONNECTION (S-VIDEO CABLE 1.5m) (S725D)
Part No.
Description
Remark
3-866-153-11 MANUAL, INSTRUCTION (ARABIC) (S725D: E12S) 3-866-153-23 MANUAL, INSTRUCTION (ENGLISH) (S725D: EXCEPT E12S, Russian, Australian) 3-866-153-31 MANUAL, INSTRUCTION (FRENCH, GERMAN) (S725D: EXCEPT E12S, Russian, Australian) 3-866-153-41 MANUAL, INSTRUCTION (ITALIAN, DUTCH) (S725D: EXCEPT Russian, Australian) 3-866-153-51 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) (S725D: EXCEPT Russian, Australian) 3-866-153-61 MANUAL, INSTRUCTION (DANISH, FINNISH) (S725D: EXCEPT Russian, Australian) 3-866-153-71 MANUAL, INSTRUCTION (SWEDISH, NORWEGIAN) (S725D: EXCEPT Russian, Australian) 3-866-153-81 MANUAL, INSTRUCTION (ENGLISH, RUSSIAN) (S725D: Russian) 3-866-153-91 MANUAL, INSTRUCTION (ENGLISH) (S725D: Australian) 3-866-504-31 MANUAL, INSTRUCTION (ENGLISH) (S325: EXCEPT Russian) 3-866-504-41 MANUAL, INSTRUCTION (FRENCH, GERMAN) (S325: EXCEPT Russian) 3-866-504-51 MANUAL, INSTRUCTION (ITALIAN, DUTCH) (S325: EXCEPT Russian) 3-866-504-61 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) (S325: AEP) 3-866-504-71 MANUAL, INSTRUCTION (DANISH, FINNISH) (S325: EXCEPT Russian) 3-866-504-81 MANUAL, INSTRUCTION (SWEDISH, NORWEGIAN) (S325: EXCEPT Russian) 3-866-504-91 MANUAL, INSTRUCTION (ENGLISH, RUSSIAN) (S325: Russian)
3-053-633-01 COVER, BATTERY (for RMT-D108O/D108P/ D109P) (S325/S525D) 3-055-539-01 COVER, BATTERY (for RMT-D111O/D111P) (S725D) 3-865-642-41 MANUAL, INSTRUCTION (ENGLISH) (S525D: EXCEPT Russian, Australian) 3-865-642-51 MANUAL, INSTRUCTION (FRENCH, GERMAN) (S525D: EXCEPT Russian, Australian) 3-865-642-61 MANUAL, INSTRUCTION (ITALIAN, DUTCH) (S525D: EXCEPT Russian, Australian) 3-865-642-71 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) (S525D: EXCEPT Russian, Australian) 3-865-642-81 MANUAL, INSTRUCTION (DANISH, FINNISH) (S525D: EXCEPT Russian, Australian) 3-865-642-91 MANUAL, INSTRUCTION (SWEDISH, NORWEGIAN) (S525D: EXCEPT Russian, Australian) 3-865-643-11 MANUAL, INSTRUCTION (ENGLISH, RUSSIAN) (S525: Russian) 3-865-643-21 MANUAL, INSTRUCTION (ENGLISH) (S525: Australian)
8-30 8-30E
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
DVP-S325/S525D/S725D
Sony Corporation 9-921-718-12
Home Video Company
– 212 –
99G05026-1D Printed in Japan © 1999. 7 Published by Quality Assurance Dept.
SERVICE MANUAL
AEP Model DVP-S325/S525D/S725D
East European Model North European Model DVP-S325/S525D/S725D
Russian Model DVP-S325/S525D/S725D
Australian Model DVP-S525D/S725D
E Model DVP-S725D Photo: DVP-S725D
SPECIFICATIONS CD/DVD player Laser Signal format system
Semiconductor laser PAL/(NTSC)
Audio characteristics Frequency response
Signal-to-noise ratio
Harmonic distortion Dynamic range Wow and flutter
DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1 dB)* (S325/S525D) DVD (PCM 96 kHz): 2 Hz to 44 kHz (±0.5 dB)* (S725D) DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB) CD: 2 Hz to 20 kHz (±0.5 dB) More than 110 dB (LINE OUT (AUDIO) connectors only) (S325/S525D) More than 110 dB (AUDIO OUT connector only) (S725D) Less than 0.0025% More than 100 dB (DVD) More than 98 dB (CD) Less than detected value (±0.001% W PEAK)
Outputs and inputs
LINE OUT (AUDIO) (S325/S525D) AUIO OUT (S725D) DIGITAL OUT (OPTICAL) DIGITAL OUT (COAXIAL) LINE OUT (VIDEO) (S325/S525D)
VIDEO OUT (1, 2) (S725D) S VIDEO OUT (S325/S525D) S VIDEO OUT (1, 2) (S725D)
COMPONENT VIDEO OUT (Y, CB/B-Y, CR/R-Y) (S725D) PHONES (EXCEPT S325) 5.1CH OUTPUT (EXCEPT S325)
Phono 1.0 Vp-p jacks 4-pin Y: 1.0 Vp-p mini DIN C: 0.3 Vp-p (PAL) C: 0.286 Vp-p (NTSC) phono Y: 1.0 Vp-p jacks CB/B-Y, CR/R-Y: 0.7 Vp-p Phone 12 mW jack Phono 2 Vrms jacks (at 50 kilohms)
75 ohms, sync negative 75 ohms, sync negative 75 ohms terminated
75 ohms, sync negative 75 ohms 32 ohms Over 10 kilohms
General
Jack type Phono jacks
Output level 2 Vrms (at 50 kilohms)
Load impedance
Power requirements Power consumption
Over 10 kilohms
Dimensions (approx.)
Phono jacks Optical output connector Phono jack Phono jacks
2 Vrms (at 50 kilohms) –18 dBm
Over 10 kilohms Wave length: 660 nm
0.5 Vp-p
75 ohms terminated
1.0 Vp-p
75 ohms, sync negative
Mass (approx.) Operating temperature
220 – 240 V AC, 50/60 Hz 16 W (S325) 17 W (S525D) 22 W (S725D) 430 × 95 × 305 mm (w/h/d) incl. projecting parts 3.3 kg (S325) 3.4 kg (S525D) 4.0 kg (S725D) 5°C to 35°C – Continued on next page –
CD/DVD PLAYER MICROFILM
Operating humidity
5% to 90%
Supplied accessories • Audio/Video connecting cord (1) • S video cable (1) • Remote commander (remote) RMT-D108O (1) (S525D: Australian) • Remote commander (remote) RMT-D108P (1) (S525D: EXCEPT Australian) • Remote commander (remote) RMT-D109P (1) (S325) • Remote commander (remote) RMT-D111O (1) (S725D: Australian) • Remote commander (remote) RMT-D111P (1) (S725D: EXCEPT Asutralian) • Size AA (R6) batteries (2) DVP-S325/S525D: * The signals from LINE OUT (AUDIO) connectors and 5.1 ch L, R connectors (S525D only) are measured. When you play the PCM sound tracks with 96 kHz sampling frequency, the output signals from the DIGITAL OUT (OPTICAL, COAXIAL) are converted to 48 kHz (sampling frequency). DVP-S725D: * The signals from AUDIO OUT connectors and 5.1 ch L, R connectors are measured. When you play the PCM sound tracks with 96 kHz sampling frequency, the output signals from the DIGITAL OUT (OPTICAL, COAXIAL) are converted to 48 kHz (sampling frequency). Design and specifications are subject to change without notice.
WARNING!!
CLASS 3B LASER LUOKAN 3B LASER LASERKLASS 3B
WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 25 cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK. CAUTION: The use of optical instrument with this product will increase eye hazard. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges.
4. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.
2. Check the interboard wiring to ensure that no wires are “pinched” or contact high-wattage resistors.
5. Check the B+ voltage to see it is at the values specified.
3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
–2–
TABLE OF CONTENTS Section
Title
Page
Section
GENERAL Getting Started .............................................................. Playing Discs ................................................................. Using Various Functions with the Control Menu ........... Settings and Adjustments .............................................
2.
Case Removal ............................................................... MB-82/85 Board Removal ............................................. Power Block Removal ................................................... ER-4/5 Board Removal (EXCEPT Australian) .............. AU-209/212 Board Removal (S325/S525D) ................. AU-210/211 Board Removal (S725D) ........................... Tray Cover Removal ..................................................... Front Panel Removal .................................................... Mechanism Deck Removal ........................................... Tray Removal ................................................................ Optical Pick-up Removal ............................................... Belt, Loading Motor (M001), MS-29/TK-51/54 Board Removal .................................. 2-13. Internal Views ................................................................ 2-14. Circuit Boards Location .................................................
3.
BLOCK DIAGRAMS
3-1. 3-2. 3-3. 3-4. 3-5. 3-6. 3-7. 3-8. 3-9. 3-10.
Overall Block Diagram .................................................. RF/Servo Block Diagram .............................................. Signal Process Block Diagram ..................................... Video Block Diagram ..................................................... System Control Block Diagram ..................................... Audio (1) Block Diagram ............................................... Audio (2) Block Diagram ............................................... Audio (3) Block Diagram ............................................... Interface Control Block Diagram ................................... Power Block Diagram ....................................................
4.
PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
4-1.
Frame Schematic Diagrams .......................................... FRAME (1) Schematic Diagram .................................... FRAME (2) Schematic Diagram .................................... FRAME (3) Schematic Diagram .................................... Printed Wiring Boards and Schematic Diagrams ......... TK-51/54 Printed Wiring Board ..................................... TK-51/54 Schematic Diagram ....................................... MS-29 Printed Wiring Board and Schematic Diagram ....................................................... MB-82/85 Printed Wiring Board .................................... MB-82/85 (AV DECODER) Schematic Diagram ........... MB-82/85 (SDRAM) Schematic Diagram ..................... MB-82/85 (SERVO DSP) Schematic Diagram ............. MB-82/85 (DRIVE) Schematic Diagram ....................... MB-82/85 (ARP) Schematic Diagram ........................... MB-82/85 (SYSTEM CONTROL) Schematic Diagram ....................................................... MB-82/85 (HGA) Schematic Diagram ........................... MB-82/85 (CLOCK GENERATOR, AUDIO DSP, V EQ/NR) Schematic Diagram ...................................... MB-82/85 (DAC) Schematic Diagram ........................... MB-82/85 (BIAS) Schematic Diagram .......................... AU-209 Printed Wiring Board ....................................... AU-209 (AUDIO) Schematic Diagram .......................... AU-209 (VIDEO BUFFER) Schematic Diagram ........... AU-210 Printed Wiring Board ....................................... AU-210 (AUDIO) Schematic Diagram .......................... AU-210 (VIDEO BUFFER) Schematic Diagram ...........
4-2.
1-1 1-4 1-6 1-12
DISASSEMBLY
2-1. 2-2. 2-3. 2-4. 2-5. 2-6. 2-7. 2-8. 2-9. 2-10. 2-11. 2-12.
Page
AU-211 Printed Wiring Board ........................................ 4-57 AU-211 (AUDIO) Schematic Diagram ........................... 4-61 AU-211 (VIDEO BUFFER) Schematic Diagram ........... 4-63 AU-212 Printed Wiring Board ....................................... 4-65 AU-212 (AUDIO) Schematic Diagram .......................... 4-67 AU-212 (VIDEO BUFFER) Schematic Diagram ........... 4-69 ER-4 Printed Wiring Board ............................................ 4-71 ER-4 (EURO AV1) Schematic Diagram ........................ 4-73 ER-4 (EURO AV2) Schematic Diagram ........................ 4-75 ER-5 Printed Wiring Board ............................................ 4-77 ER-5 (EURO AV1) Schematic Diagram ........................ 4-81 ER-5 (EURO AV2) Schematic Diagram ........................ 4-83 FL-98/101 Printed Wiring Board ................................... 4-87 FL-99/100 Printed Wiring Board ................................... 4-89 FL-98/99/100/101 (FUNCTION SWITCH) Schematic Diagram ....................................................... 4-93 FL-98/99/100/101 (IF CON) Schematic Diagram ......... 4-95 SW-314/315/316/317, FR-147/148/149/150 Printed Wiring Boards ................................................... 4-97 SW-314/315/316/317, FR-147/148/149/150 Schematic Diagram ....................................................... 4-99 HP-108/109/110/111 Printed Wiring Boards and Schematic Diagram ..................................................... 4-101 RY-12 Printed Wiring Board and Schematic Diagram ..................................................... 4-103 HS-030SH Printed Wiring Board ................................ 4-105 HS-030SH Schematic Diagram .................................. 4-107
Service Note ............................................................................ 4
1.
Title
2-1 2-1 2-1 2-1 2-2 2-2 2-2 2-2 2-3 2-3 2-3 2-3 2-4 2-5
3-1 3-3 3-5 3-7 3-9 3-11 3-13 3-15 3-17 3-19
4-3 4-3 4-5 4-7 4-9 4-9 4-13 4-15 4-17 4-21 4-23 4-25 4-27 4-29 4-31 4-33 4-35 4-37 4-39 4-43 4-45 4-47 4-49 4-53 4-55
5.
IC PIN FUNCTION DESCRIPTION
5-1.
System Control Pin Function (MB-82/85 Board IC202) ............................................... 5-1
6.
TEST MODE
6-1. 6-2. 6-3. 6-4. 6-5. 6-6. 6-7. 6-8. 6-9.
General Description ...................................................... 6-1 Starting Test Mode ........................................................ 6-1 Syscon Diagnosis .......................................................... 6-1 Drive Auto Adjustment .................................................. 6-5 Drive Manual Operation ................................................ 6-7 Mecha Aging ................................................................. 6-9 Emergency History ........................................................ 6-9 Version Information ....................................................... 6-10 Video Level Adjustment ................................................ 6-10
7.
ELECTRICAL ADJUSTMENT
7-1. 1. 7-2. 1. 2. 3. 4. 5. 6. 7. 8. 9. 7-3.
Power Supply Adjustment ............................................. HS030SH Board ............................................................ Adjustment of Video System ......................................... Video Level Adjustment ................................................. S-terminal Output Check ............................................... Checking Component Video Output B-Y ...................... Checking Component Video Output R-Y ...................... Checking Component Video Output Y .......................... Checking RGB Output R ............................................... Checking RGB Output G ............................................... Checking RGB Output B ............................................... Checking S Video output S-C ....................................... Adjustment Related Parts Arrangement .......................
8.
REPAIR PARTS LIST
7-1 7-1 7-2 7-2 7-2 7-2 7-2 7-3 7-3 7-3 7-3 7-4 7-6
8-1. Exploded Views ............................................................. 8-1 8-1-1. Case Assembly (S325/S525D) ................................ 8-1 8-1-2. Case Assembly (S725D) .......................................... 8-2 8-1-3. Front Panel Assembly .............................................. 8-3 8-1-4. Chassis Assembly .................................................... 8-5 8-1-5. Mechanism Deck Assembly ..................................... 8-7 8-2. Electrical Parts List ........................................................ 8-8
–3–
SERVICE NOTE 1. DISASSEMBLY • This set can be disassembled in the order shown below.
Set
Case (Page 2-1)
Tray Cover (Page 2-2)
MB-82/85 Board (Page 2-1)
ER-4/5 Board (EXCEPT Australian) (Page 2-1)
Front Panel (Page 2-2)
Mechanism Deck (Page 2-3)
AU-209/211 Board (EXCEPT Australian) (Page 2-2)
AU-210/212 Board (Australian) (Page 2-2)
Tray (Page 2-3)
Optical Pick-up (Page 2-3)
TK-51/54 Board (Page 2-3)
Belt (Page 2-3)
Loading Motor (M001), MS-29 Board (Page 2-3)
–4–
Power Block (Page 2-1)
2. NOTE ON REMOVE THE CASE
4.
1) Remove seven screws. (See Fig. 1) 2) Open the side of case. (See Fig. 1) 3) Remove the case as lift straight. (See Fig. 1)
1) Remove the case from the set. (Refer to 2-1) 2) Remove the MB-82/85 board. (Refer to 2-2) 3) Set the MB-82/85 board as shown in Fig. 3. Note: Do not disconnect wiring, except FMA-7/8/9.
HOW TO SERVICE MB-82/85BOARD
Case Two screws Three screws
MB-82/85 board Two screws grooves
Fig. 1 Fig. 3
3. DISC REMOVAL PROCEDURE (at POWER OFF) 1) Insert a tapering driver into the aperture of the unit bottom, and move the lever of chuck cam in the direction of the arrow A. (See Fig. 2) 2) Draw out the tray in the direction of the arrow B, and remove a disc. (See Fig. 2)
Lever of chuck cam Aperture
B A Tray
Fig. 2
–5–
DVP-S325/S525D/S725D SECTION 1 GENERAL
1-1
This section is extracted from DVP-S725D instruction manual (3-866-153-21).
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-9
1-10
1-11
1-12
1-13
1-14
1-15
1-16
1-17 1-17E
DVP-S325/S525D/S725D SECTION 2 DISASSEMBLY Note: Follow the disassembly procedure in the numerical order given.
2-1. CASE REMOVAL
2-3. POWER BLOCK REMOVAL
4 Case
2 Connector 3 Three connectors (CN101) (CN201, 202, 203) 1 Connector (CN102) (S725D)
2 Two screws
1 Three screws
4 Four screws (B3)
3 Two screws 5 Power block
2-4. ER-4/5 BOARD REMOVAL (EXCEPT Australian)
2-2. MB-82/85 BOARD REMOVAL
4 Two flat cables 5 Flat cable (CN004, 007) (CN005) (S525D/S725D) 2 Two flat cables (CN002, 003)
3 Connector (CN001)
1 Two flat cables (CN901, 902) 3 ER-4 board (S325/S525D) ER-5 board (S725D)
7 Four screws (B3)
2 Four screws (B3)
1 Connector (CN011)
6 Flat cable (CN006) 8 MB-82 board (Australian) MB-85 board (EXCEPT Australian)
2-1
2-5. AU-209/212 BOARD REMOVAL (S325/S525D)
2-7. TRAY COVER REMOVAL
3 Flat cable 4 Flat cable !º AU-209 board (CN302) (CN303) (S325/S525D: EXCEPT Australiran) (S525D: Australian) AU-212 board 9 Three screws (S525D: Australian) (B3) 5 Flat cable 2 Connector (CN301) (CN401)
4 Tray cover
6 Screws (B3) (S525D: Australian)
3 Two claws
B
7 Five screws (B3)
2 Pull the tray in the direction of the arrow B.
A
1 Insert a tapering driver into the aperture of the unit bottom, and move the lever of chuck cam in the direction of the arrow A.
1 Connector (CN201)
8 Two screws (B3) (S525D)
2-6. AU-210/211 BOARD REMOVAL (S725D)
2-8. FRONT PANEL REMOVAL 4 Screw (B3) (S525D/S725D)
3 Two connectors 6 Three screws (CN301, 404) (B3) 2 Connector 4 Three flat cables (CN401) (CN402, 403, 405)
2 Connector (CN701) (S525D/S725D)
7 AU-210 board (Australian) AU-211 board (EXCEPT Australian)
5 Two screws (B3)
6 Boss
1 Connector (CN203) 7 Boss
5 Nine screws (B3)
9 Claw
!º Front panel
8 Claw
1 Connector (CN407)
2-2
3 Flat cable (CN006)
2-9. MECHANISM DECK REMOVAL
2-11. OPTICAL PICK-UP REMOVAL
3 Screw (B3)
4 Mechanism deck
5 Optical pick-up
4 Three step screws
2 Two flat cables (CN003, 004)
3 Remove the base unit holder in the direction of the arrow A.
A
1 Connector (CN001)
1 Two flexible board (CN001, 002)
2-10. TRAY REMOVAL
2 Chuck ass’y
2-12. BELT, LOADING MOTOR (M001), MS-29/TK-51/54 BOARD REMOVAL 1 Two screws (BTP2.6 × 12)
1 Belt 2 Two screws (B2.6 × 4)
9 TK-51/54 board B
4 Remove the tray in the direction of the arrow B.
2 Two claws
8 Claw
5 Flexible board (CN002) A
3 Move the lever of chuck cam in the direction of the arrow A. 3 Three claws 4 Loading motor (M001), MS-29 board
2-3
6 Flexible board (CN001) 7 Claw
2-13. INTERNAL VIEWS
DC motor (loading) 1-541-632-11
Optical pick-up (KHM-220AAA/J1RP) 8-820-081-03
2-4
2-14. CIRCUIT BOARDS LOCATION
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
2-5 2-5E
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
DVP-S325/S525D/S725D SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM MB-82/85 BOARD
AU-209/210/211/212 BOARD
S725D
(SEE PAGE 4-45,47,53,55,61,63,67,69)
(SEE PAGE 4-21~39)
BASE UNIT
TK-51/54 BOARD
KHM-220AAA
(SEE PAGE 4-13)
IC502
16M SDRAM
V EQ/NR
PDO 0-7
16M DRAM
S525D/725D
IC402, 403
VIDEO Y, VIDEO B-Y, VIDEO R-Y
VIDEO V, VIDEO Y, VIDEO C
OPTICAL DEVICE SD 0-7 IC001 DVD/CD PDIC
RF
DVD/CD RF AMP DIGITAL SERVO
DVD RF, CD RF
VIDEO BUFFER
PDI 0-7
IC304
IC303 ARP2
AV DECODER
S325/ S525D: EXCEPT Australian S725D: EXCEPT Australian
SPDIF, ACH12, ACH34, ACH56, BCK, LRCK
CDDOUT, CDDATA, CDBCK, CDLRCK
VIDEO
VIDEO BUFFER
S VIDEO
S525D/S725D
IC401
COMPONENT VIDEO
IC501 AUDIO DSP
IC901-903 RY901-903
VIDEO R, VIDEO G, VIDEO B
EURO AV1 (RGB)-TV
SW, BUFFER
RY904,905 Parallel BUS
FOCUS COIL
EURO AV2
SW
ER-4/5 BOARD (SEE PAGE 4-73,75,81,83)
IC801 TRACKING COIL
FOCUS COIL/ TRACKING COIL/ TILT MOTOR DRIVE
IC202 IC701
TILT MOTOR
IC205 : S325/S525D
SYSTEM CONTROL
IC601
SERVO DSP
M
IC204 1M SRAM
DIGITAL OUT
SPDIF
IC206 : S725D
HGA
16M FLASH IC902 IC201
AUDIO LT, AUDIO RT
AUDIO 2CH DAC
LPF, GAIN CONTROL
AUDIO OUT
4K EEP ROM
SPINDLE MOTOR
Serial BUS
M
HP-108/109/ 110/111 BOARD
S725D
(SEE PAGE 4-102) SLED MOTOR
M001 LOADING MOTOR
M
IC802
IC602
SPINDLE/SLED/ LOADING MOTOR DRIVE
16M NAND-F
HEADPHONE AMP
PHONES
S525D/S725D
IC905-907
M
AUDIO L, R AUDIO LS, RS AUDIO C, LFE
LPF
5.1CH OUTPUT
AUDIO 5.1CH DAC ND201
IC201
MS-29 BOARD
+3.3V +5V A+12V M+12V
IF CON
(SEE PAGE 4-16)
05
FL-98/99/100/101 BOARD
+3.3V +5V +12V –12V EVER5V
S725D AC10V
SWITCH
(SEE PAGE 4-93,95) T901 JOG UNIT
RY-12 BOARD
FR-147/148/149/150 BOARD
S525D/S725D
(SEE PAGE 4-104)
(SEE PAGE 4-99)
SWITCH
HS-030SH BOARD
SWITCH
(SEE PAGE 4-107)
SW-314/315/316/317 BOARD (SEE PAGE 4-99)
3-1
–12V EVER5V
SW REG
3-2
DVP-S325/S525D/S725D 3-2. RF/SERVO BLOCK DIAGRAM TK-51/54 BOARD
BASE UNIT
MB-82/85 BOARD(1/7)
IC001%¢(DVD play) 500mV/DIV 100ns/DIV
(SEE PAGE 4-13)
KHM-220AAA
(SEE PAGE 4-25,27)
IC0011(DVD play) 200mV/DIV 100ns/DIV
IC001$º(DVD play) 100mV/DIV 50ms/DIV
IC001$º(CD play) 500mV/DIV 50ms/DIV
180mVp-p
860mVp-p
IC701^•(DVD play) 100mV/DIV 5ms/DIV
IC701^ª(DVD play) 500mV/DIV 50ms/DIV
1.5Vp-p IC001%¢(CD play) 500mV/DIV 500ns/DIV
536mVp-p IC0011(CD play) 500mV/DIV 500ns/DIV
DVD/CD RF AMP DIGITAL SERVO
OPTICAL DEVICE CN001 RF
7
1
RF IP
IC001#ª(DVD play) 500mV/DIV 50ms/DIV
IC001#ª(CD play) 500mV/DIV 200ms/DIV
1.3Vp-p
1.7Vp-p
1.5Vp-p
IC001 880mVp-p
CN003
CN002 17
SIGO 54
RF+
1.4Vp-p
180mVp-p
IC701^ª(CD play) 500mV/DIV 200ms/DIV
IC701^•(CD play) 500mV/DIV 50ms/DIV
1.7Vp-p
860mVp-p
DVD RF
2
CD RF FE 40
A-D
DVD/CD PDIC
E-H
VC
PD DVD/CD LD MODULE
LD VR
9 10 16 17
9 ı A-D 12 5 ı A2-D2 8 13 ı E-H 16
8 11 15 18
Q001 LD DRIVE
2
8
PI 29
7
TE PI
SIGNAL PROCESS 11
69 ADC0
MDS0
12
67 ADC2
MDP0
(SEE PAGE 3-5)
IC701 MIRR 26
3
TZC 32
5
VCI 33
6
5
TZC 2VC
SSCK, SSWD, 11 SSRD, SSCS ı 14
SCLK SWD 43 ı SRD 46 SDEN
20 LD
MIRR
21 TRIN
16
SERVO DSP
20 TRREF
14
+3.3V
23 FGIN 74 81 VRBA, 84 DAB 0-3 93 96
2VC
13 5 ı 8
41 ı 44
4
38 GIO 11
15
28 DFCTI
GIO 5-8
IC702 (2/2) 7
5
Q002
FDCHG 27
15
HOLD2 42
4
SSDFCT SSDFCTI
DFT 31
CN004 FCS
LOCK
68 ADC1
IC801
FOCUS COIL
FG REF 22
10
65 ADC4
19 PD
4
TE 39
FE
66 ADC3
17 VC
13
9
FCD
80 85
TRD
92 97
CN003
19 20
6 7
FCS
13 14
12 13
FOCUS COIL DRIVE
2 3
FCD
GIO 10 39
FCSON
HINT 128
XSDPIT
DAB 2,3
DAB 0, 1
Q801
HRD
1
XSDPRD
HWR
2
XSDPWR
HCS
3
XSDPCS
4 5
HA0, 1
9 21 22
4 5 IC001@ª(DVD play) 200mV/DIV 500ms/DIV
TRK
11 12
14 15
IC001@ª(CD play) 200mV/DIV 20ms/DIV
TRACKING COIL DRIVE
5 6
TRD
7
CN002 TILT MOTOR
M
592mVp-p
TIA, TIB 10 ı 13
3
1
15 ı 18
TIA, TIB
15 ı 18
1 ı 4
TILT MOTOR DRIVE
EA 0, 1
SLDA, SLDB, 7 STVC ı 9
PWM 0-2
117 ı HD 0-7 120 122 125
TILT MUTE
20
448mVp-p
GIO 1, 2
IC702 (1/2)
FGMODE 23 26
TLTA, TLTB
X2/CLKIN
TRK
RS
TRACKING COIL
TLTA,TLTB 48 49
26
108
46 GIO 4 50 GIO 0
IC803 (1/2) INLIMIT SENSOR
INLIM
2
8
INLIM
12 13
11
HD8-15
N27MSDP
14
XSDPRST
SYSTEM CONTROL
X3VRST
(SEE PAGE 3-9,10)
IC802
SPINDLE MOTOR
M
SPM
8 9
13 14
SPM
15 16
5 6
SPINDLE MOTOR DRIVE
Q802, 803 GAIN CONTROL
26
SPDLSTOP
20
SPGAIN SLED MOTOR
M
SLA, SLB 4 ı 7
9 ı 12
SLA, SLB
11 ı 14
7 ı 10
SLED MOTOR DRIVE
MS-29 BOARD
2 3 5 6
SLDA, SLDB, STVC
XDRVMUTE
9
LDMM/DMM
(SEE PAGE 4-16)
LDMP/DMP CN011
CN001 M001 LOADING MOTOR
M
1 2
S001 TRAY SENSOR
4 6
S002 CHUCK SENSOR
3
LDM
OCSW 1, 2
CKSW1
17 18
1 2
4 6
3
+3.3V
OCSW 1, 2
CKSW1
LOADING MOTOR DRIVE
+5V
OCSW1
23
OCSW2
IC803 (2/2)
CKSW1 5
7
2.5VC
10
8
2VC
3
1
1.6VC
05
3-3
3-4
DVP-S325/S525D/S725D 3-3. SIGNAL PROCESS BLOCK DIAGRAM S725D
MB-82/85 BOARD(2/7) (SEE PAGE 4-21,23,29,35)
IC502
91 SDCK, SDEF, 47 93 XSHD, XSAK, XSRQ ı ı 51 96
IC303 ARP2
DFCT
55 DFCT
NORF
56 NORF
LOCK
58 LOCK
FWON
59 FWON
MD2
113 MD2
MUTE
111 MUTE
XARPWR
60 XWR
XARPRD
61 XRD
XARPIT
83 XINT
XARPCS
84 XCS
XARPWT
86 XWAT
SDI
HSYNC
FLD
SENO
SDOUT
FLDO
HSYNCO
YO 0-7
NR-SENO
FLDO
HSYNCON
IC401%¶(RGB output model)
728mVp-p(H)
S525D/ S725D
816mVp-p(H)
RSTIN
D 0-7
VIDEO R/B-Y
B/R-Y OUT
57
VIDEO B/R-Y
COMP OUT
65
VIDEO V
Y OUT
61
VIDEO Y
C OUT
62
VIDEO C
1.1Vp-p(H) IC401^™
ACLKIN
A 0-7
63-68 70 71
SCKI
XRST
MCKI
73-76 79-82
54
1.2Vp-p(H)
166 167 193 194 196 198 ı 202
87 121 123
R/B-Y OUT
IC401 AV DECODER IC401^¡
XWRH
VIDEO G/Y
103 19 36 160 163
168-170 172-178 180-187 189-192
2-5 7-10 12-15 205-208
S325
ACH12O
21
ACH34O
22
ACH56O
23
LRCKO
25
BCKO
26
DO
27
70
X57RST
27M30
DREQ1
33M30
DACK1
DREQ0
33MARP
(SEE PAGE 3-9,10)
256FS30
VIDEO LEVEL ADJ
DACK0 XAVDRST
RV401
XAVDWT XARPRST
XAVDIT
SYSTEM CONTROL
XARPRST XAVDRST CDDOUT, CDDATA, CDBCK, CDLRCK
X57RST S725D 33MARP
ACH12 S525D/S725D
256FS30
ACH34 LRCK
HD 8-15
HA 0-7
HD 0-15
ACH56
27M30
HA 0-21
33M30 27M57 S725D
S325
BCK
AUDIO 1
SPDIF1
(SEE PAGE 3-11)
CDDOUT CDDATA CDBCK CDLRCK
HA 0-21
S525D/S725D
HD 0-15
05
3-5
VIDEO (SEE PAGE 3-7)
CDDOUT, CDDATA, 107 CDBCK, CDLRCK 29 ı ı 110 32
XRD
58
728mVp-p(H) IC401^∞
XCS2 XCS3
IC401%¶
G/Y OUT
27M57
LOCK
720mVp-p(H)
VREFI
52 MDP0
1.0Vp-p(H) IC401%•
75-78 80-83 72 73 98 99
HD 0-15
49 MDS0
MDP0
DT 0-7 I
720mVp-p(H) IC401%¢
1.0Vp-p(H)
86-89 91-94
120-123 125 127 129-132
HAD 0-21 I
MDS0
38 ı 43 45 46
IC401%• (RGB output model)
NR-SDOUT
RF, SERVO
SD 0-7
135 138 141 144 147 150 153 156
IC401%¢ (RGB output model)
93
97 98 31 29
PDI 0-7
97 98 SD 0-7 100 ı 105
134 137 140 143 146 149 152 155
SCLKIN
19 RFIN2
105-108 110-113 115-118
CLKI
17 RFIN1
CD RF
148 150-152
154-157 159-162 164-167 169-172
CRPCLKIN
DVD RF
136-139 141-144 146 147
60-67
PDO 0-7
1.6Vp-p
11-18
PDI 0-7
CLK, CKE, DQML, DQMU, CS, WE, CAS, RAS
DDT 0-15
DAD 0-11
XMWR, XCAS, XRAS, XOE
MD 00-15
MA 0-9
IC303!ª(CD play) 500mV/DIV 200ns/DIV
YI 0-7
IC402, 403 16M SDRAM
RST
PDO 0-7
IC304 16M DRAM 1.6Vp-p
(SEE PAGE 3-4)
CLK 100
V EQ/NR
CS
IC303!¶(DVD play) 500mV/DIV 100ns/DIV
3-6
DVP-S325/S525D/S725D 3-4. VIDEO BLOCK DIAGRAM MB-82/85 BOARD(3/7)
AU-209/210/211/212 BOARD(1/2)
(SEE PAGE 4-21,37)
(SEE PAGE 4-45,47,53,55,61,63,67,69)
S525D: Australian/ S725D
IC302 :S725D IC303 :S525D: Australian CN405 :S725D CN303 :S525D: Australian
CN004
SIGNAL PROCESS (SEE PAGE 3-6)
VIDEO G/Y
4
VIDEO R/B-Y
2
VIDEO B/R-Y
6
VIDEO G/Y VIDEO R/B-Y VIDEO B/R-Y
4
2
15
6
4
13
CB/B-Y
2
7
10
CR/R-Y
Y
7
VIDEO C
1
RGB EURO V/Y
EURO V/Y YUV VIDEO B VIDEO R VIDEO G
1
Q439,440 RGB/YUV SW
1 7
IC301,321!£
Q301, 302 BUFFER
1
3 5
VIDEO V VIDEO Y VIDEO C
6
1.2Vp-p(H)
VIDEO OUT2
2 4
J305 :S725D: Australian
S725D: EXCEPT Australian
CN406
IC301 :S725D IC321 :S325/S525D Y
VIDEO BUFFER
28
4
13
26
2
15
24
7
10
S VIDEO OUT1
C
J308 :S725D: EXCPET Australian J507 :S325/S525D: EXCEPT Australian Y S VIDEO OUT2
C V MUTE
8
V MUTE
21
1
23
Q301, 302 :S725D Q321, 322 :S325/S525D DC ON/OFF
(SEE PAGE 3-18)
(SEE PAGE 3-9,10)
J309 :S725D: EXCEPT Australian J506 :S325/S525D: EXCEPT Australian
VIDEO OUT1
2.4 Vp-p(H)
IC301,3212 1.1Vp-p(H)
1
J505 :S525D :Australian
IC301,3214
7
CN005
SYSTEM CONTROL
COMPONENT VIDEO OUT
VIDEO V VIDEO Y
INTERFACE CONTROL
J302 :S725D J303 :S525D: Australian
VIDEO BUFFER
J306 :S725D: Australian VS
6
DISC/EXT RGB EURO V/Y
18
VS DISC/EXT
11
CN402 :S725D CN301 :S325/S525DIC301,3217
CN902 17
VIDEO V
9
17
IC301,3210
13
860mVp-p(H)
3
IC301,321!∞
4 6 CN302 :S725D: EXCEPT Australian CN305 :S325/S525D: EXCEPT Australian
2.0Vp-p(H)
VIDEO Y VIDEO C V MUTE VS DISC/EXT
15
7
1
VIDEO B
4
15
R/C OUT
11
G OUT
2
IC903 3
7
B OUT
8
AV CONT OUT
16
I OUT
20
V IN
19
V OUT
15
R IN
11
G IN
CN904
3
2
13
1
SWITCH
4 Q914 RELAY DRIVE
6 IC902 SWITCH
VIDEO G
V/Y OUT
EURO AV1 (RGB)-TV
IC901 VIDEO BUFFER
2
RY901
1
CN901 VIDEO R
19
8
7
3
1.8mVp-p(H)
V/Y IN
RY903
15
S325/ S525D: EXCEPT Australian S725D: EXCEPT Australian
20
2
15
7
4
4
13
4
6
7
10
7
3
2
8 3 9
2
1
1 MUTE Q917 EURO V/Y YUV
1
Q918 MUTE CONT
7
S725D: EXCEPT Australian
Q909,910 RELAY DRIVE CONT
CN903
Q912 RELAY DRIVE
EURO AV2
AUDIO 2 :S325/S525D (SEE PAGE 3-14)
AUDIO 3 :S725D
4
3 2
Q901-903 I SIG GEN
(SEE PAGE 4-73,75,81,83)
S325/S525D: EXCEPT Australian/S725D: EXCEPT Australian
3-8
Q904,905 I SIG SW
I IN
8
AV CONT IN
1
Q913 RELAY DRIVE
3-7
16
8
7 Q906-908 AV CONT GEN
05
B IN
9
(SEE PAGE 3-16)
ER-4/5 BOARD(1/2)
7 RY902
RELAY DRIVE CONT
DVP-S325/S525D/S725D 3-5. SYSTEM CONTROL BLOCK DIAGRAM S325/S525D
S725D
MB-82/85 BOARD(4/7)
POWER ON RESET
RST
CS0L
5 SC0 SO0 CE
CS0 11
SI0
4 SK
23 XECS
5 DI
WC 8
24 XEWC
6 DO
R/B 1
25 XEBSY
(SEE PAGE 3-15)
HD 0-15
HA 1-20
4 WE, RY/BY, UB, LB, OE 112 113 124 125
SYSTEM CONTROL
AUDIO 3 :S725D
HD 8-15 126-133
CS
10
141 CS1
CS4
7
142 CS4
RD
22
145 HRD
WR0
23
WR1
24
144 HWRH 143 HWRL
RDY
19
INT1 INT3
CS1
GAIN2
IC001!¢(DVD play)
CKSEL
CS0H/PB2
DW0/PB3
A22/P66
RAS1/PB4 6
XT1
LDMP/DMP 92
LDMP/DMP LDMM/DMM
NORF
102 NORF
OCSW1 64
OCSW1
DFCT
103 DFCT
OCSW2 63
OCSW2
FWON
104 FWON
CKSW1 88
CKSW1
LOCK
105 LOCK
XCS3
INT0 95
XAVDIT
DACK1 84
DACK1
DACK0 85
DACK0
DREQ1 86
DREQ1
DREQ0 87
DREQ0
SIGNAL PROCESS (SEE PAGE 3-5)
SIGNAL PROCESS (SEE PAGE 3-5)
XARPRST
106 ARPRST
XARPIT
107 ARPINT 108 ARPWT
XARPWT
VIDEO DISC/EXT (SEE PAGE 3-7) S325/ S525D: EXCEPT Australian S725D: EXCEPT Australian
01IT0 29
S525D/S725D X01INT0
XARPRD
109 ARPWR 110 ARPRD
01IT1 30
X01INT1
XARPCS
111 ARPCS
01CS 28
X01CS
XAVDWT XAVDRST X57RST S725D
XDACS0 XDACS1 1
7
384FSDA
3
5
384FS01
IC003
XDRVMUTE
LDMM/DMM 91
8
VIDEO (SEE PAGE 3-7)
AUDIO 1 (SEE PAGE 3-11)
VS RGB EURO V/Y S325/ S525D: EXCEPT Australian S725D: EXCEPT Australian
72 AVDWT 71 AVDRST 27 57RST
XDACS2 96
XDACS2
97
XDACS3
01RST 31
X01RST
6
IFSC0
SO0
1 1A
1Y
3
IFSO0
INTERFACE CONTROL
IFSI0
(SEE PAGE 3-18)
SI0
DACRST 26
XDACRST
MA MUTE 49
MA MUTE
256FS30
SCKO1 12
33MARP 33M30 IC004
52 RGB SEL 51 EURO V/Y
5
6
2
1
7
SIGNAL PROCESS
27M30 N27MHGA IC0042,5,7
N27MSDP
AUDIO 2 :S325/S525D (SEE PAGE 3-13) (SEE PAGE 3-15)
S725D 27M57
4.6Vp-p(33.8MHz)
(SEE PAGE 3-11)
AUDIO 3 :S725D
59 MCK
(SEE PAGE 3-5)
3
AUDIO 1
53 VS
27M01 S525D/S725D
SCKO2 14
RF, SERVO (SEE PAGE 3-4)
4.2Vp-p(26.9MHz)
05
3-9
XVIFCS
2Y
(SEE PAGE 3-4)
XDRVMUTE 93 99 MD2
DVD:6.2Vp-p(37.0MHz) CD:5Vp-p(33.6MHz)
SCKO3 17
IC001!™
4Y 11
4 2A
RF, SERVO
98 MUTE
CS3
IC0016
4.2Vp-p(27.0MHz)
12 4A
SC0
SPGAIN
MD2
XARPWR
DVD/CD
ML
CS0L
SPDLSTOP
MUTE
XCS2
IC0035,7
SPGAIN 94
3-10
(SEE PAGE 3-11)
S525D/S725D
IC203
XSDPIT
XWRH 9
RAS0/PB0 85
SPDLSTOP 57
AUDIO 1
BUFFER
XSDPRST
XSDPCS
3 RST 135 CPUCK
S525D/S725D
1
SDPIT 115
XSDPRD
CS2
PLL
19 MD
SI1
FCSON
SDPCS 118
XRD
IC001
FCSON 54 SDPRST 114
XSDPWR
5
4Vp-p(25.3MHz)
DVD:5.8Vp-p(36.5MHz) CD:5.1Vp-p
X001 27MHz
SO1
SI1
XFRRST XIFINT
SDPRD 117
99 98
IC001!¶
SC1
SO1
XFRRST
155 XINT3
CLK
IC001!¢(CDplay)
4.7Vp-p(22.5MHz)
2 ı 5 40 ı 43
88 83
4.2Vp-p(25.3MHz)
66 100
HGA
5 ı 11 56
TEST, CLE, ALE, XWE, XWP, XCE, XRE, R/B
SDPWR 116
PF7/OCPA0/ATG
IC202(™
2.4Vp-p(12.5MHz)
IC601
FD 0-7
94
91 X1 92 X0
12 ı 19
157 WAIT 156 XINT1
IC2025
X201 12.5MHz
NFD 0-7
18 ı 21 24 I/O 0-7 ı 27
SC1
XIFINT 22
3 PB7/DW1
GAIN2
IC602
WE
IC202
(SEE PAGE 3-13)
HA 0-5, 17-19 CS 3
S725D
16M NAND-F
146-154
4K EEPROM
X3VRST
AUDIO 2 :S525D
WE, OE, CE
HD 0-15
HA 1-20
IC201
14 97
SC1
SO1
SI1
SI0
SC0
HD 8-15
D 16-31
(SEE PAGE 3-4)
A 01-15
RF, SERVO
76 77 78 79 80 89
25-39 41
SO0
42 44-64
HD 0-15
CS0L
SC1
SI1
SO1
SC0
SIO
SO0
4
HA 0, 1
+3.3V
IC207
HA 0-5, 17-19
HD 0-15
XFRRST
(SEE PAGE 3-5)
HD 0-15
HA 0-21
HA 0-21
SIGNAL PROCESS
WE, RY/BY, OE, CE
IC205 16M FLASH
CS, WE, OE, UB, LB
IC206 16M FLASH
HA 1-16
IC204 1M SRAM
HD 0-7
(SEE PAGE 4-31,33,35)
DVP-S325/S525D/S725D 3-6. AUDIO (1) BLOCK DIAGRAM MB-82/85 BOARD(5/7) (SEE PAGE 4-35,37)
S325 R502
SPDIF1
SPDIF
R536
BCK
R538
LRCK
R529
ACH12 S525D/S725D
IC902 AUDIO 2CH DAC
DO 16
SIGNAL PROCESS BCKO 9
3 BCLKIN
V OUT L 16
AUDIOLT
LRCKO 10
1 LRCIN
V OUT R 13
AUDIORT
52 CH12I
CH78O 11
2 D IN
ACH34
51 CH34I
CH12O 15
ACH56
50 CH56I
CH34O 14
SC1
CH56O 12
CS0
CDDOUT
25 CDDOBYP
CDDATA
26 CDSOBYP
CDBCK
27 CDBKCKI
CDLRCK
28 CDLRCKI
X01INT0
55 CPU INT0
IC501 AUDIO DSP
SO1
26 MD 27 MC 28 ML
ZERO 21
ZFLT
ZEROR 17
ZFRT
XTI
49 LRCKI
RSTB
47 BCKI
(SEE PAGE 3-6)
22 5
S525D/S725D IC905 FRONT L/R DAC
56 CPU INT1
3 BCLKIN
V OUT L 16
AUDIOL
61 SI
1 LRCIN
V OUT R 13
AUDIOR
CH12O
62 CS 63 SO 66 SCK
SC1 RST
SC1
CLK
SI1
2 D IN SO1
ACKI
X01CS
CS1
26 MD 27 MC 28 ML
ZEROR 17
ZFR
SO1
SO1
SC1
SC1
XDACS0
CS0
AUDIO 2 :S325/S525D (SEE PAGE 3-13) AUDIO 3 :S725D (SEE PAGE 3-15)
XDACS1
CS1
3 BCLKIN
V OUT L 16
AUDIOLS
XDACS2
CS2
1 LRCIN
V OUT R 13
AUDIORS
XDACS3
CS3
IC906 REAR L/R DAC
CH34O
2 D IN SC1 CS2
26 MD 27 MC 28 ML
X01RST
ZERO 21
ZFLS
ZEROR 17
ZFRS
XTI
SO1
RSTB
(SEE PAGE 3-9,10)
ZFL
22 5
33 7 68
SYSTEM CONTROL
ZERO 21
XTI
SO1
RSTB
X01INT1
22 5
XDACRST
384FS01
IC907
27M01
CENTER/WOOFER DAC
384FSDA
CH56O
3 BCLKIN
V OUT L 16
AUDIOC
1 LRCIN
V OUT R 13
AUDIOLFE
2 D IN SC1
27 MC 28 ML
CS3
ZEROR 17
ZFC ZFLFE
XTI
26 MD RSTB
SO1
ZERO 21
22 5
05
3-11
3-12
DVP-S325/S525D/S725D 3-7. AUDIO (2) BLOCK DIAGRAM – DVP-S325/S525D – AU-209/212 BOARD(2/2)
MB-82/85 BOARD(6/7) INTERFACE CONTROL
J502
(SEE PAGE 4-45,47,67,69)
(SEE PAGE 4-37)
Q341 BUFFER
COAXIAL DIGITAL OUT
IC505 A MUTE 1 D IN
(SEE PAGE 3-18)
OPTICAL
MA MUTE J506 : S325/S525D: EXCEPT Australian
SYSTEM CONTROL (SEE PAGE 3-9,10)
GAIN2
L
S325 CN005
CN301
SPDIF
15
AUDIOLT
11
AUDIORT
13
ZFLT
10
ZFRT
19 9 7
SPDIF AUDIOLT AUDIORT ZFLT ZFRT A MUTE MA MUTE
AUDIO OUT1
IC431 LPF +6dB
14
R
S525D
18
3
1
16
5
7
J505 : S525D: Australian Q431,432 GAIN CONTROL
L
Q435, 436 MUTE
AUDIO OUT2 R S525D
Q301 19
Q305
10
HP-108/111 BOARD (SEE PAGE 4-102)
IC401 HEAD PHONE AMP
20 22 3
1
5
7
Q401, 402 MUTE IC502
Q314, 315 LEVEL SHIFT AUDIOL
21
AUDIOR
23
ZFL ZFR
20
AUDIOL AUDIOR
27
ZFL ZFR
1
HPR
3
PHONES
3 RV701
J508
LPF +6dB
8
3
1
6
5
7
LEVEL L
Q503, 504 MUTE
AUDIO 1 (SEE PAGE 3-12)
HPL
1
S525D
J701
CN701
CN401
FRONT R
Q306
9
Q307
2
IC541 1 3
AUDIOLS
5
AUDIORS ZFLS
2
ZFRS
13
GAIN2 AUDIOLS AUDIORS ZFLS ZFRS
LPF +12dB
13 3
11
1
L
Q543, 544 MUTE 5
9
REAR
7
R
Q311 12
Q308
1
IC571 LPF +12dB, +16dB AUDIOC
7 9
AUDIOLFE
6
ZFC ZFLFE
12 CN007
AUDIOC AUDIOLFE ZFC ZFLFE
3
7
CENTER
1 Q573, 574 MUTE
5
5
WOOFER
7
Q310
8
Q309
2 CN302
Q303, 304 MUTE CONTROL
ER-4 BOARD (2/2) (SEE PAGE 4-73,75)
9
ERAUDIOR
S325/S525D: EXCEPT Australian
7
ERAUDIOL
CN305 05
7
9
CN902
RY904 4 2 7 9
3
3
A (L) OUT
8
6
A (L) IN
1
VIDEO (SEE PAGE 3-7)
Q915 RELAY DRIVE
RELAY DRIVE CONT
RY905 4
3
2
1
A (R) OUT
2
A (R) IN
3
A (L) OUT
6
A (L) IN
CN903 EURO AV2
7
8
9 1
1
A (R) OUT
2
A (R) IN
Q916 RELAY DRIVE
3-13
CN904 EURO AV1 (RGB)-TV
3-14
5.1CH OUTPUT
DVP-S325/S525D/S725D 3-8. AUDIO (3) BLOCK DIAGRAM – DVP-S725D – AU-210/211 BOARD(2/2)
MB-82/85 BOARD(6/7) INTERFACE CONTROL
J301
(SEE PAGE 4-53,55,61,63)
(SEE PAGE 4-37)
Q303 BUFFER
COAXIAL DIGITAL OUT
IC303 A MUTE 1 D IN
(SEE PAGE 3-18)
OPTICAL
MA MUTE J307 :S725D: EXCEPT Australian
SYSTEM CONTROL (SEE PAGE 3-9,10)
L
GAIN2 CN005
CN402
SPDIF
15
AUDIOLT
11
AUDIORT
13
ZFLT
10
ZFRT
19 9 7
SPDIF AUDIOLT AUDIORT ZFLT ZFRT A MUTE MA MUTE
B401 (1/2)
14 18
6
16
4
B403 LT RT
3 1
IC401 GAIN CONTROL
AUDIOR
23
ZFL ZFR
20
AUDIOL AUDIOR
1
2
1
6
7
6
7
27
ZFL ZFR
L
Q410, 411 MUTE
AUDIO OUT2 R J304
Q401
10
HP-109/110 BOARD (SEE PAGE 4-102)
IC411 HEADPHONE AMP
20 22 3
1
5
7
IC404, 408
1
3
6
1
B404 L R
3
LPF +6dB
J701
CN701
CN301 Q418, 419 MUTE
8
AUDIO 1 (SEE PAGE 3-12)
S725D: Australian
2
Q431 19
B401 (2/2) 21
R
LPF +6dB
Q437, 438 LEVEL SHIFT
AUDIOL
AUDIO OUT1
IC403, 407
HPL
1
HPR
PHONES
3
RV701
J303
3
2
1
2
1
1
6
7
6
7
LEVEL L
Q412, 413 MUTE
FRONT R
Q402
9
Q403
2
IC405, 409 1 3
AUDIOLS
5
AUDIORS ZFLS
2
ZFRS
13
GAIN2 AUDIOLS AUDIORS ZFLS ZFRS
B402 (1/2)
13
6
11
4
9
LPF +12dB
B405 LS RS
3
2
1
2
1
L
Q414, 415 MUTE 1
6
7
6
REAR
7
5.1CH OUTPUT
R
Q404 12
Q432
1
IC406, 410 B402 (2/2) AUDIOC
7 9
AUDIOLFE
6
ZFC ZFLFE
12 CN007
AUDIOC AUDIOLFE ZFC ZFLFE
7
3
5
1
LPF +12dB, +16dB
B406 C W
3
2
1
2
CENTER
1 Q416, 417 MUTE
1
6
7
6
WOOFER
7
Q433
8
Q434
2 CN403
Q405, 435 MUTE CONTROL
S725D: EXCEPT Australian
ER-5 BOARD (2/2) (SEE PAGE 4-81,83)
ERAUDIOR
05
9 ERAUDIOL
CN302 7
7
9
CN902
RY904 4 2 7 9
3
3
A (L) OUT
8
6
A (L) IN
1
VIDEO (SEE PAGE 3-7)
Q915 RELAY DRIVE
RELAY DRIVE CONT
RY905 4
3
2
1
A (R) OUT
2
A (R) IN
3
A (L) OUT
6
A (L) IN
CN903 EURO AV2
7
8
9 1 Q916 RELAY DRIVE
3-15
CN904 EURO AV1 (RGB)-TV
3-16
1
A (R) OUT
2
A (R) IN
DVP-S325/S525D/S725D 3-9. INTERFACE CONTROL BLOCK DIAGRAM MB-82/85 BOARD(7/7)
FL-98/99/100/101 BOARD
(SEE PAGE 4-31)
(SEE PAGE 4-93,95)
FR-147/148/ 149/150 BOARD (SEE PAGE 4-99)
CN202 S525D/S725D
IC051 IC201
REMOTE COMMANDER RECEIVER
SW-314/315/ 316/317 BOARD (SEE PAGE 4-99)
OUT
VES
1
IR
4
POWER
6
:S525D
STBY
7
9
4
IR
6
31 L POWER
7
32 L STBY
:S725D
D071 CN099 Q098 LED DRIVE
CN003 3 2
LVES BT25
V OUT 4
10 RESET
ON/STANDBY
3
1
2
2
LVES BT25
1
27 L VES
2
4
SOUT1
71
4
SIN1
72
5
SBUSY1
76
3
SRDY1
78
2
P CHECK
77
15
FRRST
8
1
V MUTE
11
8
A MUTE
12
9
X IN
14
X OUT
15
L JOG
29
L MULTI
30
AN2
IC201!¢
S071
S098
S224
S223
S222
S221
SHUFFLE
PROGRAM
CLEAR
REPEAT
SC0 SI0
6
IFSC0
4
IFSI0
SO0 XIFCS
5
IFSO0
XIFBUSY +3.3V
3
+5V
2 15
XVIFCS
SYSTEM CONTROL (SEE PAGE 3-10)
XIFINT +3.3V
:S725D
BT11
3
3.9Vp-p(4MHz)
S525D/S725D 5
AN1
SEARCH
S217
S216
S215
S214
NEXT
PREV
RETURN
DVD MENU
TITLE
CN203
LEFT, RIGHT, UP, DOWN, ENTER 25 DCS CCW, 26 DCS CW
DCS CCW, DCS CW
PREV
NEXT
JOG
S525D/S725D
S525D/S725D
S230
D204
S212 OPEN/CLOSE
LEFT
4 6 I 9
D203 MULTI CHANNEL
17 JOG CCW, 18 JOG CW
DOWN
ENTER
S213
S325/S525D
JOG CCW, JOG CW
UP
1 2
ENTER
JOG UNIT
S218
S725D
ACS ENTER
6 AN0
PUSH
33 ı 37 41 ı 48 39 40 49 ı 56 58 ı 64
DIG1-13
SEG1-17
31 ı 38 49 ı 53 8 ı 14 19 ı 26 44 45
ND201 VACUUM FLUORECENT DISPLAY
S725D S208
S202
S201
JOG S525D/S725D 05
3-17
V MUTE A MUTE
1
XFRRST
8
V MUTE
9
A MUTE
VIDEO (SEE PAGE 3-7)
AUDIO 2 :S325/S525D (SEE PAGE 3-13) (SEE PAGE 3-15)
X201 4MHz
3 S725D S217, 218
XFRRST
AUDIO 3 :S725D
S525D/S725D
:S525D
RIGHT
VES
6
IC202 POWER-ON RESET
VIRTUAL 3D SURROUND
70
IF CON CN201
CN002
D098
VIRTUAL 3D SURROUND
CN006
SCLK1
3-18
DVP-S325/S525D/S725D 3-10. POWER BLOCK DIAGRAM S725D
1 2
Q101-103 SWITCH
P211
+5V
P311
+3.3V
P611
–12V
P511
4 2 1 6
T901 RCORE TRANS
AC10V
+12V
IC412, Q420, 421 +9V, –9V REG
1 4 CN407
+12V
1
IC415 +5V REG
+5V +3.3V –12V EVER5V
CN404
RY-12 BOARD
+12V
(SEE PAGE 4-104)
+5V
2
EVER5V
4 2
Q422-424 SWITCH
7
EVER5V
IC301 IC302
M+12V
1
A+12V
5
+5V
6 7
+3.3V
1
PCONT
3
+5V
5
–12V
2
EVER5V
EVER5V
AU-210/211 BOARD
CN203
PC102 PHOTO COUPLER
IC303
IC401 IC402 IC403 IC404 IC405 IC406 IC407 IC408 IC409 IC410 IC411 IC413 IC414
1
CN202
PC103, Q131 POWER CONTROL T102
CN401 D401-404 1 ACOUT L, N 3
CN202
CN201
PC101 PHOTO COUPLER
Q181-183 SWITCH
CN201
CN302
(SEE PAGE 4-53,55,61,63) 11 18 10 S325/S525D
+12V
L101, 102 LINE FILTER
+12V
RY101
1 3
EVER5V
T101
7
AU-209/212 BOARD
S725D: EXCEPT Australian
(SEE PAGE 4-45,47,67,69) –12V
+12V
+5V
B301
IC302 –9V REG
6
IC431
IC301 +9V REG
4
CN902
IC401 IC502 IC541 IC571
IC303
2
S325/S525D: EXCEPT Australian/S725D: EXCEPT Australian
+5V
S525D IC321 IC505
18
(SEE PAGE 4-99)
(SEE PAGE 4-93,95)
10 11 EVER5V
CN002
CN201 8
ND201
IC201
9
Q201 –30V REG
10 5
F1 F2
9
VEE
+3.3V Q001, 002 T001 DC-DC CONVERTER
8
CN001 5
EVER5V
1
+3.3V
EVER5V
2
+12V
+12V
ER-4/5 BOARD
+5V EVER5V
(SEE PAGE 4-73,81)
S325/S525D: EXCEPT Australian
TK-51/54 BOARD
+3.3V 1
(SEE PAGE 4-13)
CN001 +5V
12
PCONT
5 6 7
CN002 +5V +3.3V
9 IC203 IC702 IC803
IC302 +3.3 REG IC303
IC401
EVER5V
V3.3V
SW-314/315/ 316/317 BOARD
A+12V
1
A+12V
IC904 A+5V A+5V REG
IC201 IC202 IC204 IC207 IC304 IC402 IC403 IC601 IC701
IC502 IC602
IC501 S525D/S725D
IC001
(SEE PAGE 4-99)
IC902
CN099 EVER5V
IC005 +3.3 REG
IC205 S325/S525D
1 M+12V
S525D/S725D +3.3V
3-19
2
S12V CN006
15
+5V +3.3V
CN001
1
14
10
S725D IC404 +3.3 REG
15
CN003 18
1
CN202
05
EVER5V
18
(SEE PAGE 4-21~39)
EVER5V
CN003
+3.3V
11
+12V
MB-82/85 BOARD
5 IC051
PCONT
EVER5V
–12V
10
IC202
12
7
IC901 IC902 IC903
10
CN305
FR-147/148/149/150 BOARD
FL-98/99/100/101 BOARD
PCONT
1 2
D101
ACOUT L, N
+5V
(SEE PAGE 4-107)
CN101 F101
CN101
CN102
HS-030SH BOARD
IC801 IC802
IC905 IC906 IC907 S525D/S725D
IC003 IC004
IC206 S725D
3-20 E
IC001
VCC (5V)
OPTICAL DEVICE
DVP-S325/S525D/S725D SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary mote is printed in each block.)
For schematic Diagram: • Caution when replacing chip parts. New parts must be attached after removal of chip. Be careful not to heat the minus side of tantalum capacitor, because it is damaged by the heat. • All resistors are in ohms, 1/4 W (Chip resistors : 1/10 W) unless otherwise specified. kΩ : 1000Ω, MΩ : 1000kΩ. • All capacitors are in µF unless otherwise noted. pF : µµF 50V or less are not indicated except for electrolytics and tantalums. • All variable and adjustable resistors have characteristic curve B, unless otherwise noted. • 2 : nonflammable resistor. • 5 : fusible resistor. • C : panel designation. • ¢ : internal component. • C : adjustment for repair. • U : B+ Line. • V : B– Line. • Circled numbers refer to waveforms. • Voltages are dc between measurement point. • Readings are taken with a color-bar signals on DVD reference disc and when playing CD reference disc. • Readings are taken with a digital multimeter (DC 10MΩ). • Voltage variations may be noted due to normal production tolerances.
For printed wiring boards: • X : indicates a lead wire mounted on the component side. • x : indicates a lead wire mounted on the printed side. • ® : Through hole. • b : Pattern from the side which enables seeing. (The other layers’ patterns are not indicated.) Caution: Pattern face side: (Side B) Parts face side: (Side A) •
Parts on the pattern face side seen from the pattern face are indicated. Parts on the parts face side seen from the parts face are indicated.
Abbreviation AUS : Australian
Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. When indicating parts by reference number, please include the board name. •
4-1
Abbreviation AUS : Australian RUS : Russian E12B : Black type in E model E12S : Silver type in E model
DVP-S325/S525D/S725D
4-1. FRAME SCHEMATIC DIAGRAMS FRAME (1) SCHEMATIC DIAGRAM
FRAME (1/3) 4-3
4-4
DVP-S325/S525D/S725D
FRAME (2) SCHEMATIC DIAGRAM – DVP-S325/S525D –
FRAME (2/3) 4-5
4-6
DVP-S325/S525D/S725D
FRAME (3) SCHEMATIC DIAGRAM – DVP-S725D –
FRAME (3/3) 4-7
4-8
DVP-S325/S525D/S725D
There are few cases that the part isn't mounted in this model is printed on this diagram.
4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
TK-51/54 BOARD(SIDE A)
TK-51/54 (RF/SERVO) PRINTED WIRING BOARD – Ref. No.: TK-51/54 board; 2,000 series –
TK-51/54 BOARD (SIDE A)
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
CN001 CN002 CN003 CN004
B-2 C-2 D-2 D-3
D003
B-2
IC001
C-1
Q001 Q002
A-2 D-1
A E C B
B
C MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH) C
E B
D 12
CN003
(12) 05
1
2
RF/SERVO TK-51/54
4-9
4-10
3 TK-51:1-672-677TK-54:1-673-437-
DVP-S325/S525D/S725D • Waveforms 1 IC001 1 (DVD play) 200 mV/DIV 100 ns/DIV
6 IC001 #ª (CD play) 500 mV/DIV 200 ms/DIV
TK-51/54 BOARD(SIDE B)
536 mVp-p 2 IC001 1 (CD play) 500 mV/DIV 500 ns/DIV
880 mVp-p 3 IC001 @ª (DVD play) 200 mV/DIV 500 ms/DIV
592 mVp-p 4 IC001 @ª (CD play) 200 mV/DIV 20 ms/DIV
448 mVp-p 5 IC001 #ª (DVD play) 500 mV/DIV 50 ms/DIV
1.7 Vp-p 7 IC001 $º (DVD play) 100 mV/DIV 50 ms/DIV
180 mVp-p 8 IC001 $º (CD play) 500 mV/DIV 50 ms/DIV
860 mVp-p 9 IC001 %¢ (DVD play) 500 mV/DIV 100 ns/DIV
1.5 Vp-p !º IC001 %¢ (CD play) 500 mV/DIV 500 ns/DIV
12 (12)
05
1.3 Vp-p
TK-51:1-672-677TK-54:1-673-4374-11
1.5 Vp-p
RF/SERVO 4-12
TK-51/54
DVP-S325/S525D/S725D
TK-51/54 (RF/SERVO) SCHEMATIC DIAGRAM – Ref. No.: TK-51/54 board; 2,000 series –
• See page 4-9 for printed wiring board and page 4-12 for waveforms.
Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
RF/SERVO TK-51/54
4-13
4-14
DVP-S325/S525D/S725D
MS-29 (LOADING) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM – Ref. No.: MS-29 board; 3,000 series –
There are few cases that the part isn't mounted in this model is printed on this diagram.
MS-29 BOARD S001 (TRAY SENSOR)
S001 CN001
LOADING MOTOR
(CHUCK SENSOR)
11 1-672-678-
05
(11)
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
LOADING 4-15
4-16
MS-29
DVP-S325/S525D/S725D
MB-82/85 (SIGNAL PROCESS/SERVO) PRINTED WIRING BOARD – Ref. No.: MB-82/85 board; 1,000 series –
MB-82/85 BOARD (SIDE A) CN001 CN002 CN003 CN004 CN005 CN006 CN007 CN010 CN011 CN012
D-2 D-4 D-5 C-1 B-1 C-7 C-1 B-6 D-6 D-6
D801 D802 D803 D804 D805 D807
C-6 C-6 C-6 C-6 C-5 C-5
IC001 IC003 IC004 IC202 IC205 IC206 IC302 IC303 IC401 IC501 IC601 IC701 IC904
A-2 A-3 B-3 A-5 A-6 A-6 D-3 C-4 C-2 A-2 A-4 C-5 A-1
Q801 Q802 Q803
C-5 C-6 C-6
There are few cases that the part isn't mounted in this model is printed on this diagram.
MB-82/85 BOARD(SIDE A)
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
MB-82:1-672-676MB-85:1-672-751-
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
SIGNAL PROCESS/SERVO MB-82/85
4-17
4-18
DVP-S325/S525D/S725D
MB82/85 BOARD(SIDE B) MB-82/85 BOARD (SIDE B) D701 D806
C-2 C-2
IC005 IC201 IC203 IC204 IC207 IC304 IC402 IC403 IC404 IC502 IC602 IC702 IC801 IC802 IC803 IC902 IC905 IC906 IC907
A-6 A-3 A-3 B-2 A-2 C-3 C-5 C-5 D-5 C-6 A-4 B-1 C-2 C-1 C-1 A-6 B-6 B-6 C-6
MB-82:1-672-676MB-85:1-672-751-
SIGNAL PROCESS/SERVO 4-19
4-20
MB-82/85
DVP-S325/S525D/S725D MB-82/85 (AV DECODER) SCHEMATIC DIAGRAM • See page 4-17 for printed wiring board. – Ref. No.: MB-82/85 board; 1,000 series –
AV DECODER MB-82/85 (1/10)
4-21
4-22
DVP-S325/S525D/S725D MB-82/85 (SDRAM) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board. • Waveforms 1 IC401 %¢
720 mVp-p (H) 1 IC401 %¢ (RGB output model)
720 mVp-p (H) 2 IC401 %¶
728 mVp-p (H) 2 IC401 %¶ (RGB output model)
728 mVp-p (H)
3 IC401 %• (RGB output model)
1.0 Vp-p (H) 4 IC401 ^¡
1.1 Vp-p (H) 5 IC401 ^™
816 mVp-p (H) 6 IC401 ^∞
1.2 Vp-p (H)
3 IC401 %•
1.0 Vp-p (H)
SDRAM
4-23
4-24
MB-82/85 (2/10)
DVP-S325/S525D/S725D
MB-82/85 (SERVO DSP) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board.
• Waveforms 1 IC701 ^ª (DVD play) 500 mV/DIV 50 ms/DIV
1.4 Vp-p 2 IC701 ^ª (CD play) 500 mV/DIV 200 mV/DIV
1.7 Vp-p 3 IC701 ^• (DVD play) 100 mV/DIV 5 ms/DIV
180 mVp-p 4 IC701 ^• (CD play) 500 mV/DIV 50 ms/DIV
860 mVp-p
SERVO DSP MB-82/85 (3/10)
4-25
4-26
DVP-S325/S525D/S725D MB-82/85 (DRIVE) SCHEMATIC DIAGRAM • See page 4-17 for printed wiring board. – Ref. No.: MB-82/85 board; 1,000 series –
DRIVE
4-27
4-28
MB-82/85 (4/10)
DVP-S325/S525D/S725D MB-82/85 (ARP) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board.
• Waveforms 1 IC303 !¶ (DVD play) 500 mV/DIV 100 ns/DIV
1.6 Vp-p 2 IC303 !ª (CD play) 500 mV/DIV 200 ns/DIV
1.6 Vp-p
ARP
MB-82/85 (5/10)
4-29
4-30
DVP-S325/S525D/S725D MB-82/85 (SYSTEM CONTROL) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board.
D
V
• Waveforms 1 IC202 (™
2 IC202 5
SYSTEM CONTROL 4-31
2.4 Vp-p (12.5 MHz)
4 Vp-p (25.3 MHz)
4-32
MB-82/85 (6/10)
DVP-S325/S525D/S725D MB-82/85 (HGA) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board.
HGA
MB-82/85 (7/10)
4-33
4-34
DVP-S325/S525D/S725D MB-82/85 (CLOCK GENERATOR, AUDIO DSP, V EQ/NR) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board and page 4-40 for waveforms.
4-36
CLOCK GENERATOR, AUDIO DSP, V EQ/NR 4-35
MB-82/85 (8/10)
DVP-S325/S525D/S725D
MB-82/85 (DAC) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board.
DAC
MB-82/85 (9/10)
4-37
4-38
DVP-S325/S525D/S725D
MB-82/85 (BIAS) SCHEMATIC DIAGRAM – Ref. No.: MB-82/85 board; 1,000 series –
• See page 4-17 for printed wiring board.
• Waveforms 1 IC004 2, 5, 7
4.2 Vp-p (26.9 MHz) 2 IC003 5, 7
DVD: 6.2 Vp-p (37.0 MHz) CD : 5 Vp-p (33.6 MHz)
6 IC001 !¢ (DVD play)
4.2 Vp-p (25.3 MHz) 7 IC001 !¢ (CD play)
4.7 Vp-p (22.5 MHz)
3 IC001 6
4.2 Vp-p (27.0 MHz) 4 IC001 !™
4.6 Vp-p (33.8 MHz) 5 IC001 !¶
DVD : 5.8 Vp-p (36.5 MHz) CD : 5.1 Vp-p (33.8 MHz)
BIAS
4-39
4-40
MB-82/85 (10/10)
DVP-S325/S525D/S725D
AU-209 (AUDIO, VIDEO BUFFER) PRINTED WIRING BOARD – Ref. No.: AU-209 board; 2,000 series –
There are few cases that the part isn't mounted in this model is printed on this diagram.
– DVP-S325/S525D:EXCEPT AUS – AU-209 BOARD CN301 CN302 CN305 CN401
B-2 B-3 B-6 C-7
D301 D304 D306 D308 D431 D432 D525 D526 D551 D552 D591 D592
A-11 A-5 A-5 B-6 A-8 A-8 A-9 A-8 A-10 A-9 A-11 A-11
IC301 IC302 IC321 IC401 IC431 IC502 IC505 IC541 IC571
C-11 A-11 B-3 A-6 B-7 B-8 A-1 B-9 B-10
Q301 Q303 Q304 Q305 Q306 Q307 Q308 Q309 Q310 Q311 Q314 Q315 Q321 Q322 Q341 Q401 Q402 Q431 Q432 Q435 Q436 Q503 Q504 Q543 Q544 Q573 Q574
B-5 A-11 B-6 C-3 C-9 C-7 C-10 C-10 C-10 C-10 B-2 B-3 B-4 B-4 A-1 A-6 A-6 B-7 B-7 C-6 A-8 B-9 A-8 B-10 A-9 B-11 A-10
AU-209 BOARD DIGITAL OUT OPTICAL
5.1 CH OUTPUT
LINE OUT COAXIAL
AUDIO R
FRONT
VIDEO
REAR
CENTER / WOOFER
S VIDEO OUT
L
1
A
2 3 K
K A
K
A
K
B
1 2 3
C
11 1-672-26405
1
2
3
4
5
6
7
8
9
10
11
(11)
12
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
AUDIO, VIDEO BUFFER 4-43
4-44
AU-209
DVP-S325/S525D/S725D
AU-209 (AUDIO) SCHEMATIC DIAGRAM – Ref. No.: AU-209 board; 2,000 series –
• See page 4-43 for printed wiring board.
– DVP-S325/S525D: EXCEPT AUS –
AUDIO AU-209
4-45
4-46
DVP-S325/S525D/S725D
AU-209 (VIDEO BUFFER) SCHEMATIC DIAGRAM • See page 4-43 for printed wiring board. – Ref. No.: AU-209 board; 2,000 series –
• Waveforms
– DVP-S325/S525D: EXCEPT AUS –
1 IC321 2
1.1 Vp-p (H)
6 IC321 !∞
2.0 Vp-p (H)
2 IC321 4
1.2 Vp-p (H) 3 IC321 7
860 mVp-p (H) 4 IC321 !º
1.8 Vp-p (H) 5 IC321 !£
2.4 Vp-p (H)
VIDEO BUFFER 4-47
4-48
AU-209
DVP-S325/S525D/S725D
AU-210 (AUDIO, VIDEO BUFFER) PRINTED WIRING BOARD – Ref. No.: AU-210 board; 3,000 series –
There are few cases that the part isn't mounted in this model is printed on this diagram.
– DVP-S725D: AUS –
AU-210 BOARD(SIDE
A)
11 1-672-248-
05
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
AUDIO, VIDEO BUFFER AU-210
4-49
4-50
(11)
DVP-S325/S525D/S725D
AU-210 BOARD(SIDE
B)
COMPONENT VIDEO OUT
DIGITAL OUT OPTICAL
AUDIO OUT
VIDEO OUT
COAXIAL
Y
CB/B-Y
CR/R-Y
1
5.1CH OUTPUT FRONT
2
REAR
CENTER/WOOFER
S VIDEO OUT
AU-210 BOARD (SIDE B)
K
K
A
A K
K A
A
A K
KK
K
B
1
27 1 2
7
28 1
13
2
C
4
1
12
11 1-672-24805
1
2
3
4
5
6
7
8
9
10
11
12
(11)
CN301 CN401 CN402 CN403 CN404 CN405 CN407
C-5 C-11 C-2 C-3 C-4 C-4 C-5
D301 D302 D303 D304 D401 D402 D403 D404 D405 D406 D407 D408 D409 D410 D411 D421 D422 D423 D424 D425
A-4 A-4 A-4 A-4 C-11 C-11 C-11 C-11 C-4 B-4 B-4 B-4 B-4 A-11 A-11 B-5 B-5 B-5 B-5 C-4
IC301 IC302 IC303 IC401 IC403 IC404 IC405 IC406 IC407 IC408 IC409 IC410 IC411 IC412 IC415
B-1 B-3 A-1 C-7 B-7 B-8 C-9 C-10 B-7 B-8 B-9 B-10 B-5 B-11 C-5
Q301 Q302 Q303 Q401 Q402 Q403 Q404 Q405 Q410 Q411 Q412 Q413 Q414 Q415 Q416 Q417 Q418 Q419 Q420 Q421 Q422 Q423 Q424 Q431 Q432 Q433 Q434 Q435 Q437 Q438
B-2 B-2 A-1 B-4 B-4 B-4 B-4 B-4 A-7 A-6 A-8 A-8 A-9 A-9 A-10 A-10 B-5 B-5 B-12 B-11 A-11 A-11 A-11 B-4 B-5 B-5 B-5 C-5 C-7 C-8
AUDIO, VIDEO BUFFER 4-51
4-52
AU-210
DVP-S325/S525D/S725D AU-210 (AUDIO) SCHEMATIC DIAGRAM – Ref. No.: AU-210 board; 3,000 series –
• See page 4-49 for printed wiring board.
– DVP-S725D: AUS –
AUDIO
AU-210 (1/2)
4-53
4-54
DVP-S325/S525D/S725D AU-210 (VIDEO BUFFER) SCHEMATIC DIAGRAM – Ref. No.: AU-210 board; 3,000 series –
• See page 4-49 for printed wiring board.
– DVP-S725D: AUS –
• Waveforms 1 IC301 2
1.1 Vp-p (H)
6 IC301 !∞
2.0 Vp-p (H)
2 IC301 4
1.2 Vp-p (H) 3 IC301 7
860 mVp-p (H) 4 IC301 !º
1.8 Vp-p (H) 5 IC301 !£
2.4 Vp-p (H)
VIDEO BUFFER 4-55
4-56
AU-210 (2/2)
DVP-S325/S525D/S725D
AU-211 (AUDIO, VIDEO BUFFER) PRINTED WIRING BOARD – Ref. No.: AU-211 board; 3,000 series – – DVP-S725D: EXCEPT AUS –
There are few cases that the part isn't mounted in this model is printed on this diagram.
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
AUDIO, VIDEO BUFFER AU-211
4-57
4-58
DVP-S325/S525D/S725D
AU-211 BOARD (SIDE B)
K K
K A
K A
1 2
1
27
2
7
1
1
7
17
28
18
13
1
4
2
1
12
4-59
4-60
CN301 CN302 CN401 CN402 CN403 CN404 CN405 CN406 CN407
C-5 B-4 C-11 C-2 C-3 C-4 C-3 B-3 C-5
D301 D303 D401 D402 D403 D404 D405 D406 D407 D408 D409 D410 D411 D421 D422 D423 D424 D425 D426 D427
A-4 A-4 C-11 C-11 C-11 C-11 C-4 B-4 B-4 B-4 B-4 A-11 A-11 B-5 B-5 B-5 B-5 C-4 B-2 B-2
IC301 IC302 IC303 IC401 IC403 IC404 IC405 IC406 IC407 IC408 IC409 IC410 IC411 IC412 IC415
B-1 B-3 A-1 C-7 B-7 C-8 C-9 C-10 B-7 B-8 B-9 B-10 B-5 B-11 C-5
Q301 Q302 Q303 Q401 Q402 Q403 Q404 Q405 Q410 Q411 Q412 Q413 Q414 Q415 Q416 Q417 Q418 Q419 Q420 Q421 Q422 Q423 Q424 Q425 Q426 Q427 Q431 Q432 Q433 Q434 Q435 Q437 Q438 Q439 Q440
B-2 B-2 A-1 B-4 B-4 B-4 B-4 B-4 A-7 A-6 A-8 A-8 A-9 A-9 A-10 A-10 B-5 B-5 B-12 B-11 A-11 A-11 A-11 B-3 B-3 B-3 B-4 B-5 B-5 B-5 C-5 C-7 C-8 B-3 B-3
AUDIO, VIDEO BUFFER AU-211
DVP-S325/S525D/S725D AU-211 (AUDIO) SCHEMATIC DIAGRAM – Ref. No.: AU-211 board; 3,000 series –
• See page 4-57 for printed wiring board.
– DVP-S725D: EXCEPT AUS –
AUDIO
AU-211 (1/2)
4-61
4-62
DVP-S325/S525D/S725D
AU-211 (VIDEO BUFFER) SCHEMATIC DIAGRAM – Ref. No.: AU-211 board; 3,000 series –
• See page 4-57 for printed wiring board.
• Waveforms 1 IC301 2
– DVP-S725D: EXCEPT AUS –
1.1 Vp-p (H)
6 IC301 !∞
2.0 Vp-p (H)
2 IC301 4
1.2 Vp-p (H) 3 IC301 7
860 mVp-p (H) 4 IC301 !º
1.8 Vp-p (H) 5 IC301 !£
2.4 Vp-p (H)
VIDEO BUFFER 4-63
4-64
AU-211 (2/2)
DVP-S325/S525D/S725D AU-212 (AUDIO, VIDEO BUFFER) PRINTED WIRING BOARD – Ref. No.: AU-212 board; 2,000 series – – DVP-S525D: AUS – There are few cases that the part isn't mounted in this model is printed on this diagram.
AU-212 BOARD DIGITAL OUT OPTICAL
COMPONENT VIDEO OUT
LINE OUT COAXIAL
AUDIO R
CB / B-Y
Y
VIDEO
5.1 CH OUTPUT CR / R-Y
FRONT
REAR
CENTER/WOOFER
S VIDEO OUT
L
AU-212 BOARD CN301 CN302 CN303 CN401
B-2 B-3 B-3 C-7
D301 D304 D305 D306 D307 D308 D431 D432 D525 D526 D551 D552 D591 D592
A-11 A-5 A-5 A-5 A-5 B-2 A-8 A-8 A-9 A-8 A-10 A-9 A-11 A-11
IC301 IC302 IC303 IC321 IC401 IC431 IC502 IC505 IC541 IC571
C-11 A-11 B-6 B-3 B-5 B-7 B-8 A-1 B-9 B-10
Q301 Q303 Q304 Q305 Q306 Q307 Q308 Q309 Q310 Q311 Q314 Q315 Q321 Q322 Q341 Q401 Q402 Q431 Q432 Q435 Q436 Q503 Q504 Q543 Q544 Q573 Q574
B-4 A-11 C-2 C-6 C-9 C-7 C-9 C-10 C-10 C-10 B-3 B-3 B-3 B-7 A-1 B-6 B-6 B-7 C-7 C-6 A-8 B-9 A-8 A-10 A-9 B-10 A-10
A
A
K
1
K
2 A K K
K A
K
K
3
A
K
K
K A
B
1 2 3
C
11 1-672-23705
1
2
3
4
5
6
7
8
9
10
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
AUDIO, VIDEO BUFFER AU-212
4-65
4-66
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
11
12
(11)
DVP-S325/S525D/S725D AU-212 (AUDIO) SCHEMATIC DIAGRAM – Ref. No.: AU-212 board; 2,000 series – – DVP-S525D: AUS –
AUDIO
4-67
4-68
AU-212 (1/2)
DVP-S325/S525D/S725D
AU-212 (VIDEO BUFFER) SCHEMATIC DIAGRAM – Ref. No.: AU-212 board; 2,000 series –
• See page 4-65 for printed wiring board.
• Waveforms 1 IC321 2
– DVP-S525D: AUS –
1.1 Vp-p (H) 2 IC321 4
1.2 Vp-p (H) 3 IC321 7
860 mVp-p (H) 4 IC321 !º
1.8 Vp-p (H) 5 IC321 !£
2.4 Vp-p (H)
VIDEO BUFFER AU-212 (2/2)
4-69
4-70
6 IC321 !∞
2.0 Vp-p (H)
DVP-S325/S525D/S725D
ER-4 (EURO AV) PRINTED WIRING BOARD – Ref. No.: ER-4 board; 2,000 series –
There are few cases that the part isn't mounted in this model is printed on this diagram.
– DVP-S325/S525D: EXCEPT AUS – ER-4 BOARD
ER-4 BOARD
EURO AV2
EURO AV1 (RGB) - TV
K
K A
K
K
A
A K
A K
A K
K
A KK
A
A KK
KK
K
A
A
K
K
K
K A
K
1
CN901 CN902 CN903 CN904
C-3 B-6 A-5 A-2
D901 D902 D903 D904 D905 D906 D908 D915 D917 D918 D919 D920 D921 D922 D923 D924 D926 D927 D929 D930
B-5 A-1 B-2 B-3 B-4 B-5 A-4 A-5 A-1 A-2 A-2 A-2 A-2 A-2 A-3 A-3 A-4 A-3 A-1 A-1
IC901 IC902 IC903
C-2 B-2 B-4
Q901 Q902 Q903 Q904 Q905 Q906 Q907 Q908 Q909 Q910 Q912 Q913 Q914 Q915 Q916
C-4 C-4 B-5 C-5 B-5 C-5 C-5 B-5 B-5 B-4 A-1 B-2 B-3 A-4 B-5
2
B 17 18
11
C 05
(11)
1-672-269-
1
2
3
4
5
6
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
4-71
4-72
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
EURO AV ER-4
DVP-S325/S525D/S725D ER-4 (EURO AV1) SCHEMATIC DIAGRAM – Ref. No.: ER-4 board; 2,000 series –
• See page 4-71 for printed wiring board.
– DVP-S325/S525D: EXCEPT AUS –
EURO AV1 ER-4 (1/2)
4-73
4-74
DVP-S325/S525D/S725D ER-4 (EURO AV2) SCHEMATIC DIAGRAM – Ref. No.: ER-4 board; 2,000 series –
• See page 4-71 for printed wiring board.
– DVP-S325/S525D: EXCEPT AUS –
EURO AV1 4-75
4-76
ER-4 (2/2)
DVP-S325/S525D/S725D
ER-5 (EURO AV) PRINTED WIRING BOARD – Ref. No.: ER-5 board; 2,000 series – – DVP-S725D: EXCEPT AUS – There are few cases that the part isn't mounted in this model is printed on this diagram.
ER-5 BOARD(SIDE A)
12 1-672-258-
05
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
EURO AV ER-5
4-77
4-78
(12)
DVP-S325/S525D/S725D
ER-5 BOARD(SIDE B)
EURO AV2
EURO AV1 (RGB) - TV
ER-5 BOARD (SIDE B)
K
K
A
A
A K
KK
A
A K
K
KK
A
A KK
KK
K
A
K
K
A
A
K
K
K
K A
1 2
B 17 18
C 05
7
12
1
(12)
1-672-258-
1
2
3
4
5
6
CN901 CN902 CN903 CN904
C-3 B-6 A-5 A-2
D901 D902 D903 D904 D905 D906 D907 D908 D910 D915 D917 D918 D919 D920 D921 D922 D923 D924 D926 D927 D929 D930
B-4 A-1 B-2 B-3 B-4 B-5 B-4 A-4 B-3 A-5 A-1 A-2 A-2 A-2 A-2 A-2 A-3 A-3 A-4 A-3 A-1 A-1
IC901 IC902 IC903
C-2 B-2 B-4
Q901 Q902 Q903 Q904 Q905 Q906 Q907 Q908 Q909 Q910 Q912 Q913 Q914 Q915 Q916 Q917 Q918
C-4 C-4 C-4 C-5 B-5 C-5 C-5 B-5 B-5 B-4 A-1 B-2 B-3 A-4 B-5 B-3 B-3
EURO AV 4-79
4-80
ER-5
DVP-S325/S525D/S725D ER-5 (EURO AV1) SCHEMATIC DIAGRAM – Ref. No.: ER-5 board; 2,000 series –
• See page 4-77 for printed wiring board.
– DVP-S725D: EXCEPT AUS –
EURO AV1 ER-5 (1/2)
4-81
4-82
ER-5 (EURO AV2) SCHEMATIC DIAGRAM – Ref. No.: ER-5 board; 2,000 series –
DVP-S325/S525D/S725D
• See page 4-77 for printed wiring board.
– DVP-S725D: EXCEPT AUS –
EURO AV2 4-83
4-84
ER-5 (2/2)
DVP-S325/S525D/S725D
FL-98/101 (FUNCTION SWITCH, IF CON) PRINTED WIRING BOARD – Ref. No.: FL-98/101 board; 2,000 series –
There are few cases that the part isn't mounted in this model is printed on this diagram.
– DVP-S325/S525D –
FL-98/101 BOARD FL-98/101 BOARD CN201 CN202 CN203
C-1 C-10 C-12
D202 D203 D204 D206 D207
A-10 C-1 C-13 B-1 B-1
IC201 IC202
B-9 A-10
PROGRAM
CLEAR
TITLE
A
RETURN
DVD MENU
FLUORESCENT INDICATOR TUBE
SHUFFLE
3
1
4
5
REPEAT NEXT
PREV
Q201
B-1
B D204,S208 JOG
9
1
OPEN/CLOSE
D203
C
MULTI CANNEL
17
1
11 FL-98 : 1-672-265FL-101 : 1-672-23805
1
2
3
4
5
6
7
8
9
10
11
12
(11)
13
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
FUNCTION SWITCH, IF CON 4-87
4-88
FL-98/101
DVP-S325/S525D/S725D
FL-99/100 (FUNCTION SWITCH, IF CON) PRINTED WIRING BOARD – Ref. No.: FL-99/100 board; 2,000 series –
There are few cases that the part isn't mounted in this model is printed on this diagram.
– DVP-S725D –
FL-99/100 BOARD(SIDE
A)
05
12 (12) FL-99 : 1-672-249FL-100 : 1-672-254-
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
FUNCTION SWITCH, IF CON FL-99/100
4-89
4-90
DVP-S325/S525D/S725D
FL-99 /100 BOARD
FL-99/100 BOARD(SIDE
B)
PROGRAM
CLEAR
TITLE
A
3
1
4
5
C-1 C-10 C-12
D202 D203 D204 D206 D207
A-10 C-1 C-13 B-1 B-1
IC201 IC202
B-9 A-10
Q201
B-1
RETURN
DVD MENU
FLUORESCENT INDICATOR TUBE
SHUFFLE
CN201 CN202 CN203
REPEAT
SEARCH SEARCH
B D204,S208 JOG
9
1
OPEN/CLOSE
D203
C
MULTI CANNEL
1
17
12 (12)
S230
FL-99 : 1-672-249FL-100 : 1-672-254-
NEXT
PREV PUSH
05
1
2
3
4
5
6
7
8
9
10
11
12
13
FUNCTION SWITCH, IF CON 4-91
4-92
FL-99/100
DVP-S325/S525D/S725D
FL-98/99/100/101 (FUNCTION SWITCH) SCHEMATIC DIAGRAM • See pages 4-87 and 4-89 for printed wiring board. – Ref. No.: FL-98/99/100/101 board; 2,000 series –
FUNCTION SWITCH FL-98/99/100/101 (1/2)
4-93
4-94
DVP-S325/S525D/S725D
FL-98/99/100/101 (IF CON) SCHEMATIC DIAGRAM • See pages 4-87 and 4-89 for printed wiring board. – Ref. No.: FL-98/99/100/101 board; 2,000 series –
• Waveform 1 IC201 !¢
3.9 Vp-p (4 MHz)
IF CON
4-95
4-96
FL-98/99/100/101 (2/2)
DVP-S325/S525D/S725D
SW-314/315/316/317 (SURROUND SWITCH), FR-147/148/149/150 (IR/POWER SWITCH) PRINTED WIRING BOARDS – Ref. No.: SW-314/315/316/317 board and FR-147/148/149/150 board; 4,000 series –
– DVP-S725D –
– DVP-S525D –
There are few cases that the part isn't mounted in this model is printed on this diagram.
SW-315/316 BOARD SW-315/316 BOARD
SW-314/317 BOARD
11
12
12
(11)
(12)
(12)
05
05
SW-315 : 1-672-251SW-316 : 1-672-256-
SW-314 : 1-672-267SW-317 : 1-672-240-
FR-147/150 BOARD
FR-147/150 BOARD
D098,S098 VIRTUAL 3D SURROUND
D098,S098 VES
05
– DVP-S525D –
(SIDE B)
(SIDE A)
CN001 CN002 CN003
B-3 A-5 A-2
D001 D002 D003 D004 D071
A-4 A-4 B-4 A-4 A-1
IC051
A-1
Q001 Q002
A-3 A-3
1 2 3
A
(ON/STANDBY)
11
B
(11)
1
05
2
3
4
FR-147 : 1-672-266FR-150 : 1-672-239-
SW-315 : 1-672-251SW-316 : 1-672-256-
– DVP-S725D –
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
FR-148/149 BOARD(SIDE
A)
12 (12) FR-148 : 1-672-250FR-149 : 1-672-25505
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
FR-148/149 BOARD(SIDE
B)
1 2 3
FR-148/149 BOARD (SIDE B)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
CN001 CN002 CN003
B-3 A-5 A-2
D001 D002 D003 D004 D071
A-4 A-4 B-4 A-4 A-1
IC051
A-1
Q001 Q002
4-97
A-3 A-3
A
(ON/STANDBY)
12
B 05
(12)
1
2
SURROUND SWITCH, IR/POWER SWITCH SW-314/315/316/317, FR-147/148/149/150
4-98
3
4
FR-148 : 1-672-250FR-149 : 1-672-255-
DVP-S325/S525D/S725D
SW-314/315/316/317 (SURROUND SWITCH), FR-147/148/149/150 (IR/POWER SWITCH) SCHEMATIC DIAGRAM – Ref. No.: SW-314/315/316/317 board and FR-147/148/149/150 board; 4,000 series –
– DVP-S525D/S725D –
4-100
SURROUND SWITCH, IR/POWER SWITCH 4-99
SW-314/315/316/317, FR-147/148/149/150
DVP-S325/S525D/S725D
HP-108/109/110/111 (HEADPHONE) PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAM – Ref. No.: HP-108/109/110/111 board; 2,000 series – There are few cases that the part isn't mounted in this model is printed on this diagram.
– DVP-S525D/S725D – – DVP-S525D –
HP-108/111 BOARD
K
K
A
11
K A
(11)
K
HP-108 : 1-672-268HP-111 : 1-672-241-
05
LEVEL PHONES
MIN
MAX
– DVP-S725D –
HP-109/110 BOARD(SIDE
HP-109/110 BOARD(SIDE
A)
B)
K
K A
12
K A
(12)
K
05
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-109 : 1-672-252HP-110 : 1-672-257-
12 (12) HP-109 : 1-672-252HP-110 : 1-672-257-
05
LEVEL PHONES
MIN
MAX
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
HEADPHONE
HP-108/109/110/111
4-101
4-102
DVP-S325/S525D/S725D
RY-12 (RELAY) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM – Ref. No.: RY-12 board; 2,000 series – There are few cases that the part isn't mounted in this model is printed on this diagram.
RY-12 BOARD
– DVP-S725D –
– DVP-S725D –
1
2
3
1
11 05
1-672-888-
Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
(11)
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
4-103
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
RELAY 4-104
RY-12
DVP-S325/S525D/S725D
HS-030SH (SWITCHING REGULATOR) PRINTED WIRING BOARD – Ref. No.: 030SH board; 6,000 series – There are few cases that the part isn't mounted in this model is printed on this diagram. HS-030SH BOARD CN101 CN102 CN201 CN202 CN203
A-3 C-4 A-1 B-1 B-1
D101 D102 D104 D105 D131 D132 D133 D135 D182 D183 D184 D185 D211 D212 D311 D401 D402 D511 D611
C-4 A-3 A-3 A-2 A-2 A-2 A-3 A-3 C-2 C-2 C-2 C-3 B-1 B-2 A-2 C-1 C-1 B-2 B-2
IC301 IC401
A-2 C-1
Q101 Q102 Q103 Q131 Q181 Q182 Q183
B-3 A-3 B-3 A-2 C-2 C-3 C-2
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/POWER SWITCH) (AUDIO) (Australian) TK-54 (EXCEPT Australian) (RF/SERVO) Power Block (HS-030SH) (SWITCHING REGULATOR) ER-4 RY-12 (S725D) (S325/S525D: EXCEPT Australian) (RELAY) ER-5 (S725D: EXCEPT Australian) (EURO AV)
HP-108 (S525D: EXCEPT Australian) HP-109 (S725D: Australian) HP-110 (S725D: EXCEPT Australian) HP-111 (S525D: Australian) (HEADPHONE)
MS-29 (LOADING)
SW-314 (S525D: EXCEPT Australian) SW-315 (S725D: Australian) SW-316 (S725D: EXCEPT Australian) SW-317 (S525D: Australian) (SURROUND SWITCH)
MB-82 (Australian) MB-85 (EXCEPT Australian) (SIGNAL PROCESS/SERVO) FL-98 (S325/S525D: EXCEPT Australian) FL-99 (S725D: Australian) FL-100 (S725D: EXCEPT Australian) FL-101 (S525D: Australian) (FUNCTION SWITCH)
SWITCHING REGULATOR HS-030SH
4-105
4-106
DVP-S325/S525D/S725D
HS-030SH (SWITCHING REGULATOR) SCHEMATIC DIAGRAM – Ref. No.: HS-030SH board; 6,000 series –
1
2
3
4
5
HS-030SH BOARD C112 0.047uF 630V
R152 0.22 R133 D131 1k 1SS270A
R131 R135 2.2k 2.7k
314 3.1
C131 + 10uF 50V
+
Q102 2SC3377 SWITCH
D132 1SS270A
0
R112 4.7k
R114 2.2k
R113 680
R301 68
R110 3.9k D105 1SS270A
C115 0.033uF
+ C186 1uF 400V R187 180k 1/2W
!
! C101 0.1µF 250V
AC IN
314 S
R188 180k 1/2W
C182 0.0033uF
R182 330 1/2W
!
CN102 2P
3
GND
4
+12V
B-
5
GND
6
-12V
7
E+5V
8
GND
C313 47uF 35V
+
R211 10 2W
C613 47uF 35V
+ L511 10uH
C512 47uF 35V
D182 RD2.7ESB2 R184 3.3k
R183 2.2k
B-
R304 1.5k
C102 0.1µF 250V
IC301
7
+3.3V
6
+3.3V
5
+5V
4
GND
3
GND
2
M+12V
1
A+12V
MB-82/85 BOARD CN001 (SEE PAGE 4-39)
CN203 6P 1
P-CONT
2
E+5V
3
+5V
4
GND
5
-12V
6
GND
FR-147/148/149/150 BOARD CN001 (SEE PAGE 4-99)
R305 (SHORT)
SHUNT REG R306 1.5k
B+
D183 1SS270A
R185 5.6k
R401 68
R402 1k
PC102 TLP721F
D101 S1WBAO60
!
CN202 7P
!
P511 750mA 60V
AU-209 BOARD B301 :S325/S525D:EXCEPT AUS (SEE PAGE 4-45) AU-210 BOARD CN404 :S725D:AUS (SEE PAGE 4-53) AU-211 BOARD CN404 :S725D:EXCEPT AUS (SEE PAGE 4-61) AU-212 BOARD B301 :S525:AUS (SEE PAGE 4-67)
C401 + 100uF D402 35V RD7.5ESB1
!
IC401
2
C103 330pF 250V
+
D401 11EQS04
SHUNT REG
E
2.5
R189 15k
D185 Q182 RD18 2SC3377 FB2 1.2 SWITCH -0.3
D184 D1N60
+
4
C301 1uF 50V
C185 0.01uF
L182 RS204
L102 ! 18mH
R101 1M 1/2W
L611 39uH
D212 RD24FB2
R303 1k
IC301 AN1431T
C184 0.0047uF
L101 ! 18mH
C311 330uF 35V
B-
! T102
C181 2200pF 1kV 314
448
R181 27k
D
+
!
1.2 S
C611 560uF 35V
R713 1k
Q183 2SK2663 SWITCH
1.6A 250V
B+
! 1.5AP61160V
! 2.0AP31160V
PC103 TLP721F
C
Q181 2SK2663 SWITCH
B+
B-
D511 S2L20U
!
C183 0.0022uF
C213 + 47uF 35V
C511 + 1000uF 25V
PC101 TLP721F
1
+5V
-0.1
R186 (SHORT)
314
B+
D611 D3S4M
R116 220 1/2W
Q131 2SC3377 POWER CONTROL
!
+3.3V
2
D104 2.4V
9.0 D102 RD18FB2
C116 0.01uF 50V
R134 10k
F101
1
3.1
D135 1SS270A D133 RD2.7ESB2
R115 27k
CN101 2P
CN201 8P
L311 10uH
C132 + 1uF 50V
R132 22k
S C117 0.0033uF
B
C211 + 330uF 35V D311 21DQ04
L150 45
314 S
Q101 2SK2333 SWITCH
B+
P211 500mA 60V
B+
C113 47pF 2kV
R104 3.3M 1/2W
!
L211 10uH
B+
8
B+ Q103 2SK2333 SWITCH 314
435
C110 + 56uF 400V
D211 S2L20U
7
B+
A
! T101
6
3.9 IC401 AN1431T
C402 + 1uF 2.5 50V
R403 1.2k
R404 270
R405 1.5k
!
!
C107 330pF 250V
C104 330pF 250V
1 RY-12 BOARD CN101 (SEE PAGE 4-104) 2
Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
05
SWITCHING REGULATOR 4-107
4-108 E
HS-030SH
Pin name
PB5
PB6 PB7
VCC3 CLK
CS5 CS4
CS3 CS2
CS1 CS0
NMI HST
RST GND MD0
MD1 MD2
RDY P81
P82 RD
WR0 WR1
D16-D23 D24-D30
GND D31
A00 VCC5
A01-A21 GND
P66 P67
Pin No.
1
2 3
4 5
6 7
8 9
10 11
12 13
14 15 16
17 18
19 20
5-1 E
21 22
23 24
25-32 33-39
40 41
42 43
44-64 65
66 67
O I
O -
O -
I/O
I/O I/O
O O
I O
I I
I I
I I
I I
O O
O O
O O
O
O O
O
I/O
PLL IC control output “H”: DOUBLE DIAG mode signal input “L”: DIAG
Address bus A1-A21 Ground
Address bus A0 Power supply
Ground Data bus D15 (16 bit), D7 (8 bit)
Data bus D0-D7 (16 bit) Data bus D8-D14 (16 bit), D0-D6 (8 bit)
High byte write enable signal output (16 bit and 8 bit) Low byte write enable signal output (16 bit only)
Test terminal (fixed at “L”) Read enable signal output
Wait signal input Test terminal (fixed at “H”)
Input of mode select 1 (fixed at “0”) Input of mode select 2 (fixed at “0”)
Reset signal input from IF CON Ground Input of mode select 0 (fixed at “1”)
Not used (fixed at “H”) Not used (fixed at “H”)
Chip select signal for external SRAM Chip select signal for external FLASH ROM
Chip select signal for SDRAM and AV DEC Chip select signal for REG and AV DEC
Not used Chip select signal for ARP, SERVO DSP and HGA
Power supply CPU clock out (25 MHz)
VES gain control “H”: VES Rear CH boost control “H”: rear boost
Analog filter gain control
Function
5-1. SYSTEM CONTROL PIN FUNCTION (MB-82/85 BOARD IC202)
100
98 99
96 97
94 95
92 93
90 91
88 89
86 87
84 85
81 82 83
79 80
77 78
75 76
73 74
71 72
69 70
Pin No. 68
PB4
PB2 PB3
PB0 PB1
INT1 INT0
X0 VCC5
GND X1
INT3 SC1
DREQ1 DREQ0
DACK1 DACK0
SI2 SO2 PF7
SI1 SO1
SO0 SC0
AN3 SI0
AN1 AN2
AGND AN0
AVCC AVRH
Pin name EOP0
O
O O
I O
I I
I -
O
I O
I I
O O
I O O
I O
O O
I I
I I
I
-
I/O I
DVD/CD select (“H”: 44.1kHz “L”: 48kHz)
Chip select signal to DAC (Lt and Rt) Chip select signal to DAC (L and R)
Rear panel lime input select (“H”: DISC “L”: EXT) Chip select signal to IF CON
Input of interrupt ARP and SERVO DSP Input of interrupt from AV DEC
Clock input (12.5MHz) Power supply
Ground Clock output (12.5MHz)
Input of interrupt from HGA Serial clock output
Input of DMA-REQ 0 from AV DEC Input of DMA-REQ 1 from AV DEC
Output of DMA-ACK 0 to AV DEC Output of DMA-ACK 1 to AV DEC
Serial bus 2 (for data input) Serial bus 2 (for data output) Reset signal output
Serial bus 1 (for data input) Serial bus 1 (for data output)
Serial data output to IF CON and EEPROM Serial clock output to IF CON and EEPROM
Set of mode 3 (fixed at “H”) Serial data input from IF CON and EEPROM
Set of mode 1 Set of mode 2
Ground Set of mode 0
Power supply Reference power supply (+3.3V)
Function Not used
DVP-S325/S525D/S725D SECTION 5 IC PIN FUNCTION DESCRIPTION
DVP-S325/S525D/S725D SECTION 6 TEST MODE 6-1.
GENERAL DESCRIPTION
### Syscon Diagnosis ### Diag All Check No. 2 Version
The Test Mode allows you to make diagnosis and adjustment easily using the remote commander and monitor TV. The instructions, diagnostic results, etc. are given on the on-screen display (OSD).
6-2.
2-3. ROM Check Sum Check Sum = xxxx
STARTING TEST MODE
Press [TITLE], [CLEAR], [POWER] buttons on the remote commander in this order with the power of main unit in OFF status, and the Test Mode starts, then the menu shown below will be displayed on the TV screen. At the bottom of menu screen, the model name and revision number are displayed. To execute each function, select the desired menu and press its number on the remote commander. To exit from the Test Mode, press the POWER button.
Press NEXT Key to Continue Press PREV Key to Repeat _
For the ROM Check, the check sum calculated by the Syscon is output, and therefore you must compare it with the specified value for confirmation. Following the message, press [NEXT] key to go to the next item, or [PREV] key to repeat the same check again. To quit the diagnosis and return to the Check Menu screen, press [STOP] or [ENTER] key. If an error occurred, the diagnosis is suspended and the error code is displayed as shown below.
Test Mode Menu 0. Syscon Diagnosis 1. Drive Auto Adjustment 2. Drive Manual Operation 3. Mecha Aging 4. Emergency History 5. Version Information 6. Video Level Adjustment Exit: Power Key _ Model : DPX12xxxx Revision: 1.xxxx
6-3.
### Syscon Diagnosis ###
3-3. EEPROM Check Error 03: EEPROM Write/Reed N Address : 00000001 Write Data : 2492 Read Data : 2490 Press NEXT Key to Continue Press PREV Key to Repeat _
SYSCON DIAGNOSIS
The same contents as board detail check by serial interface can be checked from the remote commander. On the Test Mode Menu screen, press [0] key on the remote commander, and the following check menu will be displayed.
0. 1. 2. 3. 4. 5. 6. 7. 8. _
Press [STOP] key to quit the diagnosis, or [PREV] key to repeat the same item where an error occurred, or [NEXT] key to continue the check from the item next to faulty item.
### Syscon Diagnosis ### Check Menu Quit All Version Peripheral Servo Supply AV Decoder Video Audio
Subnemu Selecting 2 and subsequent items calls the submenu screen of each item. For example, if “5. Supply” is selected, the following submenu will be displayed.
0. 1. 2. 3. 4. 5. _
0. Quit Quit the Syscon Diagnosis and return to the Test Mode Menu.
### Syscon Diagnosis ### Check Menu No. 5 Supply Quit All ARP Register Check ARP to RAM Data Bus ARP to RAM Address Bus ARP RAM Check
1. All All items continuous check This menu checks all diagnostic items continuously. Normally, all items are checked successively one after another automatically unless an error is found, but at a certain item that requires judgment through a visual check to the result, the following screen is displayed for the key entry.
0. Quit Quit the submenu and return to the main menu.
1. All All submenu items continuous check This menu checks 2 and subsequent items successively. At the item where visual check is required for judgment or an error occurred, the checking is suspended and the message is output for key entry. Normally, all items are checked successively one after another au-
6-1
tomatically unless an error is found. Selecting 2 and subsequent items executes respective menus and outputs the results. For the contents of each submenu, see “Check Items List”.
(3-4) NAND Flash Check Data clear → write → read, and accord check This check is conducted to the DVP-S725D only. Error 04: Clear error 05: Write error 06: Read data discord 21: Faulty blocks exceed 10 The data clear, write, read, and check are executed to the block 0 of Flash memory (IC602). In case of a faulty block, its address is displayed. An error is output if faulty blocks exceed 10.
General Description of Checking Method
2. Version (2-2) Revision ROM revision number is displayed. Error: Not detected. The revision number defined in the source file of ROM (IC205 or IC206) is displayed with four digits.
4. Servo (4-2) Servo DSP Check Data write → read, and accord check Error 12: Read data discord Data 0x9249, 0x2942, 0x4294 are written to the address 0x602 of RAM in the Servo DSP (IC701), then read and checked.
(2-3) ROM Check Sum Check sum is calculated. Error: Not detected. The 8-bit data are added at addresses 0x000F0000 ~ 0x002EFFFF of ROM (IC205 or IC206) and the result is displayed with 4-digit hexadecimal number. Error is not detected. Compare the result with the specified value.
(4-3) DSP Driver Test Test signal data → DSP Driver Error: Not detected.
(2-4) Model Type Model code is displayed. Error: Not detected. The model code read from EEPROM (IC201) is displayed with 2-digit hexadecimal number.
Caution: Do not conduct this test with a mechanical deck connected. The maximum voltage is applied to the Servo Driver IC (IC801, IC802). If mechanical deck is connected, the motor and optics could be damaged. Disconnect mechanical deck following the output message, then enter specified 4or 5-digit number from the remote commander, and press the [ENTER]. The test is conducted only when the input data accord. Check the output level, then press the [NEXT] to finish the test. This test is skipped if “All” is selected.
Model Type DVP-S325 (EXCEPT Russian)
0
1
DVP-S325 (Russian)
0
2
DVP-S525D (EXCEPT Russian, Australian)
2
3
DVP-S525D (Russian)
2
4
DVP-S525D (Australian)
2
5
4
3
DVP-S725D (EXCEPT Russian, Australian, E12B) DVP-S725D (Russian)
4
4
DVP-S725D (Australian)
4
5
DVP-S725D (E12B)
4
6
Supplement: How to disconnect mechanical deck Disconnect flat cables connected to the CN002 and CN003 of MB-82/85 board. Also, disconnect harness from the CN011.
5. Supply
• Abbreviation E12B : Black type in E model E12S : Silver type in E model
Caution: Do not conduct this check with a mechanical deck connected. An access is made to the stream supply and servo control IC (IC303) and external RAM (IC304) using check data. If mechanical deck is connected, the motor and optics could be damaged. This check is also executed by the “All” menu item.
(2-5) Region Region code is displayed. Error: Not detected. The region code determined from the model code is displayed.
Supplement: How to disconnect mechanical deck Disconnect flat cables connected to the CN002 and CN003 of MB-82/85 board. Also, disconnect harness from the CN011.
3. Peripheral (3-2) Gate Array Check Data write → read, and accord check Error 02: Gate array write/read discord Data 0x00~0xFF are written to the address 0xF of GA (IC601), then read and checked if they accord.
(5-2) ARP Register Check Data write → read, and accord check Error 08: ARP register write, and read data discord Data 0x00 to 0xFF are written to the TMAX register (address 0xC6) in ARP (IC303), then they are read and checked.
(3-3) EEPROM Check Data write → read, and accord check Error 03: EEPROM write/read discord Data 0x9249, 0x2942, 0x4294 are written to addresses 0x00~0xFF of EEPROM (IC201), then read and checked. Before writing, the data are saved, then after checking, they are written to restore the contents of EEPROM.
6-2
6. AV Decoder
(5-3) ARP to RAM Data Bus Data write → read, and accord check Error 09: ARP ←→ RAM data bus error Data 0x0001 to 0x8000 where one bit each is set to 1 are written to the address 0 of RAM (IC304) connected to the ARP (IC303) through the bus, then they are read and checked. In case of discord, written bit pattern and read data are displayed. If data where multiple bits are 1 are read, the bits concerned may touch each other. Further, if data where certain bit is always 1 or 0 regardless of written data, the line could be disconnected or shorted.
(6-2) 1930 RAM Data write → read, and accord check Error 13: AVD RAM read data discord The program code data stored in ROM (IC205 or IC206) are copied to all areas of RAM (IC402, IC403) connected to the AVD (IC401) through the bus, then they are read and checked if they accord. Further, the same test is conducted once again with the data where all bits are inverted between 1 and 0. If discord is detected, faulty address, written data, and read data are displayed following the error code 13, and the test is suspended.
(5-4) ARP to RAM Address Bus Data write → other address read discord check Error 10: ARP → RAM address bus error Caution: Address and data display in case of an error is different from the display of other diagnosis (described later). Before starting the test, all addresses of RAM (IC304) are cleared to 0x0000. First, 0xA55A is written to the address 0x00000, and the address data are read and checked from addresses 0x00001 to 0x80000 while shifting 1 bit each. Next, the data at that address is cleared, and it is written to the address 0x00001, and read and checked in the same manner. This check is repeated up to the address 0x80000 while shifting the address data by 1 bit each. If data other than 0 is read at the addresses except written address, an error is given because all addresses were already cleared to 0. In this check, the error display pattern is different from that of other diagnosis; read data, written address, and read address are displayed in this order. However, the message uses same template, and accordingly exchange Address and Data when reading. The following display, for example,
(6-3) 1930 SP ROM → AVD RAM → Video OUT Error: Not detected. The data including sub picture streams in ROM (IC205 or IC206) are transferred to the RAM (IC402, IC403) in AVD (IC401), and output as video signals from the AVD (IC401). They are output from all video terminals (Composite, Y/C, Component) except EURO AV terminal.
7. Video (7-2) Color Bar AVD color bar command write → Video OUT Error: Not detected. The command is transferred to the AVD, and the color bar signals are output from video terminals. They are output from all video terminals (Composite, Y/C, Component) except EURO AV terminal. (7-3) Composite Out EURO-AV Composite video output check This check is executed only for European models DVPS325/DVP-S525D (except for Australian model)/DVPS725D (except for Australian model). AVD color bar command write → Video (EURO-AV Composite) OUT Error: Not detected. With the Component of video output turned off, the color bar signals are output from the EURO-AV terminal.
### Syscon Diagnosis ###
5-4. ARP to RAM Address Bus Error 10: ARP - RAM Address B Address : 0000A55A Write Data : 00000000 Read Data : 00080000 Press NEXT Key to Continue Press PREV Key to Repeat _
(7-4) Y/C Out EURO-AV Y/C video output check This check is executed only for European models DVPS325/DVP-S525D (except for Australian model)/DVPS725D (except for Australian model). AVD color bar command write → Video (EURO-AV Y/C) OUT Error: Not detected. With the Y/C of video output turned on, the color bar signals are output from the EURO-AV terminal.
shows the data 0xA55A was read from address 0x00080000 though it was written to the address 0x00000000. This implies that these addresses are in the form of shadow. Also, if the read data is not 0xA55A, another error will be present.
(7-5) RGB Out EURO-AV RGB video output check This check is executed only for European models DVPS325/DVP-S525D (except for Australian model)/DVPS725D (except for Australian model). AVD color bar command write → Video (EURO-AV RGB) OUT Error: Not detected. With the RGB of video output turned on, the color bar signals are output from the EURO-AV terminal.
(5-5) ARP RAM Check Data write → read, and accord check Error 11: ARP RAM read data discord The program code data stored in ROM are copied to all areas of RAM (IC304) connected to the ARP (IC303) through the bus, then they are read and checked if they accord. If the detail check was selected initially, the data are written to all areas and read, then the same test is conducted once again with the data where all bits are inverted between 1 and 0. If discord is detected, faulty address, written data, and read data are displayed following the error code 11, and the test is suspended.
6-3
(7-6) Component Out EURO-AV Component video output check This check is executed only for European models DVPS325/DVP-S525D (except for Australian model)/DVPS725D (except for Australian model). AVD color bar command write → Video (EURO-AV Component) OUT Error: Not detected. With the Component of video output turned on, the color bar signals are output from the EURO-AV terminal.
6) AV Decoder (6-2) 1930 RAM (6-3) 1930 SP 7) Video (7-2) Color Bar (7-3) Composite Out (DVP-S325/DVP-S525D (except for Australian model)/DVP-S725D (except for Australian model)) (7-4) Y/C Out (DVP-S325/DVP-S525D (except for Australian model)/DVP-S725D (except for Australian model)) (7-5) RGB Out (DVP-S325/DVP-S525D (except for Australian model)/DVP-S725D (except for Australian model)) (7-6) Component Out (DVP-S325/DVP-S525D (except for Australian model)/DVP-S725D (except for Australian model))
(7-7) Euro AV Through Euro-AV2 input check. This check is executed only for European models DVPS325/DVP-S525 (except for Australian model) /DVPS725D (except for Australian model). Check video and audio signal pass through from Euro-AV2 to Euro-AV1. Error: Not detected.
8) Audio (8-2) ARP → 1930 (8-3) Test Tone Error Codes List 00: Error not detected 01: RAM write/read data discord 02: Gate array NG 03: EEPROM NG 04: Flash memory clear error 05: Flash memory write error 06: Flash memory read data discord 08: ARP register read data discord 09: ARP ←→ RAM data bus error 10: ARP ←→ RAM address bus error 11: ARP RAM read data discord 12: Servo DSP NG 13: 1930 SDRAM NG 14: ARP → 1930 video NG 15: ARP → 1930 audio NG 16: 1910 UCODE download NG 17: System call error (function not supported) 18: System call error (parameter error) 19: System call error (illegal ID number) 20: System call error (time out) 21: NAND Flash faulty blocks exceed 10 90: Error occurred 91: User verification NG 92: Diagnosis cancelled
8. Audio (8-2) ARP → 1930 Error 14 : ARP → 1930 video NG 15 : ARP → 1930 audio NG (8-3) Test Tone A pink noise signal is output from the AVD (IC401) through optical coaxial digital terminal and analog audio terminal. Error: Not detected. For DVP-S330 (2ch models): All channels → 2ch Left → 2ch Right are checked in this order. For DVP-S525D/DVP-S725D (DD models): All channels → 2ch Left → 2ch Right → Front Left → Front Right → Rear Left → Rear Right → Center → Sub Woofer are checked in this order. Caution: Sub Woofer is checked only for low-frequency components, and no sound will be heard unless a proper super woofer is connected. Check Items List 2) Version (2-2) Revision (2-3) ROM Check Sum (2-4) Model Type (2-5) Region 3) Peripheral (3-2) Gate Array Check (3-3) EEPROM Check (3-4) NAND Flash Check (DVP-S725D) 4) Servo (4-2) Servo DSP Check (4-3) DSP Driver Test 5) Supply (5-2) ARP Register Check (5-3) ARP to RAM Data Bus (5-4) ARP to RAM Address Bus (5-5) ARP RAM Check
6-4
6-4.
1. DVD-SL (single layer) Select [1], insert DVD single layer disc, and press [ENTER] key, and the adjustment will be made through the following steps, then adjusted values will be written to the EEPROM.
DRIVE AUTO ADJUSTMENT
On the Test Mode Menu screen, press [1] key on the remote commander, and the drive auto adjustment menu will be displayed.
DVD Single Layer Disc Adjustment Steps 1. SLED TILT Reset 2. Disc Check Memory SL 3. Wait 300 msec 4. Set Disc Type SL 5. LD ON 6. Spdl Start 7. Wait 1 sec 8. Focus Servo ON 0 9. Auto Track Offset Adjust 10. CLVA ON 11. Wait 500 msec 12. Tracking ON 13. Wait 1 sec 14. Sled ON 15. Check CLV Lock 16. Auto LFO Adjust 17. Auto Focus Offset Adjust 18. Auto Tilt Position Adjust 19. Auto Focus Gain Adjust 20. Auto Focus Offset Adjust 21. EQ Boost Adjust 22. Auto LFO Adjust 23. Auto Track Gain Adjust Search Check 24. 32Tj Fwd 25. 32Tj Rev 26. 500Tj Fwd 27. 500Tj Rev
## Drive Auto Adjustment ## Adjustment Menu 0. 1. 2. 3. 4.
ALL DVD-SL CD DVD-DL SACD
Exit: RETURN
Normally, [0] is selected to adjust DVD (single layer), CD, DVD (dual layer), and SACD in this order. But, individual items can be adjusted for the case where adjustment is suspended due to an error. In this mode, the adjustment can be made easily through the operation following the message displayed on the screen. The disc used for adjustment must be the one specified for adjustment. However, for SACD disc, use the player with initial data if the disc is not available. 0. ALL Select [0] and press [ENTER] key, and the servo set data in EEPROM will be initialized. Then, 1. DVD-SL disc, 2. CD disc, 3. DVD-DL disc, and 4. SACD disc are adjusted in this order. Each time one disc was adjusted, it is ejected. Replace it with the specified disc following the message. Though the message to confirm whether discs other than SACD disc are adjusted is not displayed, you can finish the adjustment if pressing the [STOP] button. During adjustment of each disc, the measurement for disc type judgment is made. As automatic adjustment does not judge the disc type unlike conventional models, take care not to insert wrong type discs. Also, do not give a shock during adjustment.
28. All Servo Stop 29. Eep Copy Loop Filter Offset
6-5
2. CD Select [2], insert CD disc, and press [ENTER] key, and the adjustment will be made through the following steps, then adjusted values will be written to the EEPROM.
3. DVD-DL (dual layer) Select [3], insert DVD dual layer disc, and press [ENTER] key, and the adjustment will be made through the following steps, then adjusted values will be written to the EEPROM.
CD Adjustment Steps 1. Sled Tilt Rest 2. Disc Check Memory CD 3. Wait 500 msec 4. Set Disc Type CD 5. LD ON 6. Spdl Start 7. Wait 500 msec 8. Focus Servo ON 0 9. Auto Track Offset Adjust
DVD Dual Layer Disc Adjustment Steps 1. Sled Tilt Reset 2. Disc Check Memory DL 3. Wait 500 msec 4. Set Disc Type DL 5. LD ON 6. Spdl Start 7. Wait 1 sec Layer 1 Adjust 8. Focus Servo ON 1 9. Auto Track Offset Adjust
10. CLVA ON 11. Wait 500 msec 12. Tracking ON 13. (TC Display Start) 14. Wait 1 sec 15. Jitter Display Start 16. Sled ON 17. Check CLV ON 18. Auto LFO Adjust 19. Auto Focus Offset Adjust 20. 21. Auto Focus Gain Adjust 22. Auto Focus Offset Adjust 23. Eq Boost Adjust 24. Auto LFO Adjust 25. Auto Track Gain Adjust Search Check 26. 32Tj Fwd 27. 32Tj Rev 28. 500Tj Fwd 29. 500Tj Rev
10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28.
Clva ON Wait 500 msec Tracking ON Wait 500 msec Sled ON Check CLV Lock Auto Loop Filter Offset Auto Focus Adjust Auto Focus Gain Adjust Auto Focus Offset Adjust Eq Boost Adjust Auto Loop Filter Offset Auto Track Gain Adjust Search Check 32Tj Fwd 32Tj Rev 500Tj Fwd 500Tj Rev Layer 0 Adjust Fj (L1 → L0) Auto Track Offset Adjust L0
30. All Servo Stop 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48.
Clva ON Wait 500 msec Tracking ON Wait 500 msec Sled ON Check CLV Lock Auto Focus Filter Offset Auto Focus Adjust Auto Focus Gain Adjust Auto Focus Offset Adjust Eq Boost Adjust Auto Loop Filter Offset Auto Track Gain Adjust Search Check 32Tj Fwd 32Tj Rev 500Tj fwd 500Tj Rev Layer Jump Check Lj (L0 → L1) Lj (L1 → L0)
49. All Servo Stop
6-6
4. SACD Select [4], insert SACD disc, and press [ENTER] key, and the adjustment will be made through the following steps, then adjusted values will be written to the EEPROM. However, if SACD disc is not available, use the player with initial data, skipping the SACD adjustment. In this case, you can finish the adjustment if pressing the [STOP] button.
6-5.
On the Test Mode Menu screen, select [2], and the manual operation menu will be displayed. For the manual operation, each servo on/off control and adjustment can be executed manually. ## Drive Manual Operation ##
SACD Adjustment Steps 1. Sled Tilt Reset 2. Set Disc Type CD 3. LD ON 4. Spdl Start 5. Wait 500 msec 6. Focus Servo ON 0 7. Auto track Offset Adjust 8. 9. CLVA ON 10. Wait 500 msec 11. Tracking ON 12. Wait 1 sec 13. Sled ON 14. Check CLV ON 15. Auto Focus Offset Adjust 17. 18. Auto Focus Gain Adjust 19. Auto Focus Offset Adjust 20. Eq Boost Adjust 21. Auto LFO Adjust 22. Auto Track Gain Adjust 23. 24. 25. 26.
DRIVE MANUAL OPERATION
1. 2. 3. 4. 5. 6.
Operation Menu Disc type Servo Control Track/Layer Jump Manual Adjustment Auto Adjustment Memory Check
0. Disc Check Memory Exit: Return
In using the manual operation menu, take care of the following points. These commands do not provide protection, thus requiring correct operation. The sector address or time code field is displayed when a disc is loaded. 1. Set correctly the disc type to be used on the Disc Type screen. The disc type must be set after a disc was loaded. The set disc type is cleared when the tray is opened. 2. After power ON, if the Drive Manual Operation was selected, first perform “Reset SLED TILT” by opening 1. Disc Type screen. 3. In case of an alarm, immediately press the [STOP] button to stop the servo operation, and turn the power OFF.
32Tj Fwd 32Tj Rev 500Tj Fwd 500Tj Rev
Basic operation (controllable from front panel or remote commander)
27. All Servo Stop
[POWER] [STOP] [OPEN/CLOSE] [RETURN] [NEXT], [PREV] [1] to [9], [0] Cursor UP/DOWN
6-7
Power OFF Servo stop Stop+Eject/Loading Return to Operation Menu or Test Mode Menu Transition between sub modes of menu Selection of menu items Increase/Decrease in manually adjusted value
0. Disc Check Memory
Disc Type Disc Type Auto Check DVD SL 12 cm DVD DL 12 cm CD 12cm SACD 12 cm DVD SL 8 cm DVD DL 8 cm CD 8 cm SACD 8 cm Reset SLED TILT TC. : : EMG. 00 CD 12 cm 1. 2. 3. 4. 5. 6. 7. 8. 9. 0.
Disc Check
1. SL Disc Check 2. CD Disc Check 3. DL Disc Check
0. Reset SLED TILT
Display when CD 12cm disc was selected On this screen, the mirror time is measured to judge the disc and it is written to the EEPROM. First load DVD SL disc and press [1], next load CD disc and press [2], and finally load DVD DL disc and press [3]. The adjustment must be executed more than once after default data were written. External vibration or shock to the player must not be given. Reference value for DVD is from 10 to 20, and for CD, from 28 to 4F. Check that the value of CD is larger than that of DVD. When those values are beyond a range perform this adjustment again. From this screen, you can go to another mode by pressing [NEXT] or [PREV] key, but you cannot enter this mode from another mode. You can enter this mode from the Operation Menu screen only.
[0] Reset SLED TILT
Reset the Sled and Tilt to initial position.
[1] Disk Type Check
Judge automatically the loaded disc. As the judged result is displayed at the bottom of screen, make sure that it is correct. If Disc Check Memory menu has not been executed after EEPROM default setting, the disc type cannot be judged. In this case, return to the initial menu and make a check for three types of discs (SL, DL, CD).
[2] to [9]
Select the loaded disc. The adjusted value is written to the address of selected disc. No further entry is necessary if [1] was selected.
1. Disc Type 1. 2. 3. 4. 5. 6. 7. 8. 9. 0.
Disc Type Disc Type Auto Check DVD SL 12 cm DVD DL 12 cm CD 12cm SACD 12 cm DVD SL 8 cm DVD DL 8 cm CD 8 cm SACD 8 cm Reset SLED TILT
2. Servo Control 1. 2. 3. 4. 5. 6. 7.
EMG. 00
On this screen, select the disc type. To select the disc type, press the number of the loaded disc. The selected disc type is displayed at the bottom. Selecting [1] automatically selects and displays the disc type. In case of wrong display, retry “Disc Check Memory”. Also, opening the tray causes the set disc type to be cleared. In this case, set the disc type again after loading. In performing manual operation, the disc type must be set. Once the disc type has been selected, the sector address or time code display field will appear as shown below. These values are displayed when PLL is locked.
Servo Control LD Off R.Sled FWD SP Off L.Sled REV Focus Off TRK. Off Sled Off CLVA Off FCS. Srch Off
0. Reset SLED TILT SA. SI. DVD SL 12 cm
EMG. 00
On this screen, the servo on/off control necessary for replay is executed. Normally, turn on each servo from 1 sequentially and when CLVA is turned on, the usual trace mode becomes active. In the trace mode, DVD sector address or CD time code is displayed. This is not displayed where the spindle is not locked. The spindle could run overriding the control if the spindle system is faulty or RF is not present. In such a case, do not operate CLVA.
Disc Type Disc Type Auto Check DVD SL 12 cm DVD DL 12 cm CD 12cm SACD 12 cm DVD SL 8 cm DVD DL 8 cm CD 8 cm SACD 8 cm Reset SLED TILT SA. SI. EMG. 00 DVD SL 12 cm 1. 2. 3. 4. 5. 6. 7. 8. 9. 0.
Display when DVD SL 12cm disc was selected
6-8
[0] Reset SLED TILT
Reset the Sled and Tilt to initial position.
[1] LD
Turn ON/OFF the laser.
[2] SP
Turn ON/OFF the spindle.
[3] Focus
Search the focus and turn on the focus.
[4] TRK
Turn ON/OFF the tracking servo.
[5] Sled
Turn ON/OFF the sled servo.
[6] CLVA
Turn ON/OFF normal servo of spindle servo.
[7] FCS. Srch
Apply same voltage as that of focus search to the focus drive to check the focus drive system.
→ Sled FWD
Move the sled outward. Perform this operation with the tracking servo turned off.
← Sled REV
Move the sled inward. Perform this operation with the tracking servo turned off.
6-6.
MECHA AGING ### Mecha Aging ###
↑ Tilt UP
Move the tilt upward.
↓ Tilt DOWN
Move the tilt downward.
Press OPEN key
Abort: STOP key
On the Test Mode Menu screen, selecting [3] executes the aging of mechanism. First, open the tray and load a disc. Press the [PLAY] key, and the aging will start. When the tray is closed, the disc type and size are judged and displayed. During aging, the repeat cycle is displayed. Aging can be aborted at any time by pressing the [STOP] key. After the operation has stopped, unload the disc and press again the [STOP] key or the [RETURN] key to return to the Test Mode Menu.
6-7.
EMERGENCY HISTORY ### MEG. History ###
Laser Hours
CD DVD
xxxxxxxh xxxxxxxh
1. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
The following menus are normally not used. 2. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3. Track/Layer Jump 4. Manual Adjustment 5. Auto Adjustment
Select: 1 – 9 Scroll: UP/DOWN (1: Last EMG.) Exit: Return
On the Test Mode Menu screen, selecting [4] displays the information such as servo emergency history. The history information from last 1 up to 10 can be scrolled with ↑ key or ↓ key. Also, specific information can be displayed by directly entering that number with ten keys.
The persons who do not know well about these menus should not use them.
6. Memory Check EEPROM DATA CD ID No. 00 SACD Focus Gain xx xx TRK. Gain xx xx Focus Offset xx xx TRK. Offset xx xx L. F. Offset xx xx EQ Boost xx xx Jitter xx xx Mirror Time xx xx _ CLEAR: Default Set
– SL xx xx xx xx xx xx xx xx
DVD L0 xx xx xx xx xx xx xx xx
– L1 xx xx xx xx xx xx xx xx
The upper two lines display the laser ON total hours. Data below minutes are omitted. Clearing History Information Clearing laser hours Press [DISPLAY] and [CLEAR] keys in this order. Both CD and DVD data are cleared. Clearing emergency history Press [TITLE] and [CLEAR] keys in this order. Initializing set up data Press [DVD] and [CLEAR] keys in this order. The data have been initialized when “Set Up Initialized” message is displayed. The EMG. History screen will be restored soon.
This screen displays current servo adjusted data stored in the EEPROM. Though adjusted data can be initialized with the [CLEAR] key, they cannot be restored after initialization. So, before clearing, make a note of the adjusted data. For reference, the drive has been designed so that the gain center value is 20 and offset value is 80. Other values will be in a range of 10 to 80. If extreme value such as 00 or FF is set, adjustment will be faulty. In such a case, check for disc scratch or cable disconnection, then perform adjustment again.
6-9
How to see Emergency History 3
6-8.
1
VERSION INFORMATION
2 ## Version Information ##
1.
IF con.
Ver. x. xxx (xxxx) Group 00
SYScon.
Ver. x. xxx (xxxx) Model xx Region 0x SW1 ?? SW2 ??
2
1: Emergency Code 2: Don't Care These codes are used for verification of software designing. 3: Historical order 1 to 9
Exit: RETURN
Emergency Codes List 10: Communication to IC001 (TK-51/54 board) failed. 11: Each servo for focus, tracking, and spindle is unlocked. 12: Communication to EEPROM, IC201 (MB-82/85 board) failed. 13: Writing of hours meter data to EEPROM, IC201 (MB-82/85 board) failed. 14: Communication to Servo DSP IC701 (MB-82/85 board) failed, or Servo DSP is faulty. 20: Initialization of tilt servo and sled servo failed. They are not placed in the initial position. 21: Tilt servo operation error 22: Syscon made a request to move the tilt servo to wrong position. 23: Sled servo operation error 24: Syscon made a request to move the sled servo to wrong position. 30: Tracking balance adjustment error 31: Tracking gain adjustment error 32: Focus balance adjustment error 33: Focus bias adjustment error 34: Focus gain adjustment error 35: Tilt servo adjustment error 36: RF equalizer adjustment error 37: RF group delay adjustment error 38: Jitter value after adaptive servo operation is too large. 40: Focus servo does not operate. 41: With a dual layer (DL) disc, focus jump failed.50: CLV (spindle) servo does not operate. 51: Spindle does not stop. 60: With a DVD disc, Syscon made a request to seek nonexistent address. 61: With a CD disc, Syscon made a request to seek nonexistent address. 62: With a CD disc, Syscon made a request to seek nonexistent track No. and index No. 63: With a DVD disc, seeking of target address failed. 64: With a CD disc, seeking of target address failed. 65: With a CD disc, seeking of target index failed. 70: With a DVD disc, physical information data could not be read. 71: With a CD disc, TOC data could not be read. 80: Disc type judgment failed. 81: As disc type judgment failed, retry was repeated. 82: As disc type judgment failed, a measurement error occurred. 83: Disc type could not be judged within the specified time. 84: Illegal command code was received from Syscon. 85: Illegal command was received from Syscon.
On the Test Mode Menu screen, selecting [5] displays the ROM version and region code. The parenthesized hexadecimal number in version field is checksum value of ROM.
6-9.
VIDEO LEVEL ADJUSTMENT
On the Test Mode Menu screen, selecting [6] displays color bars for video level adjustment. During display of color bars, OSD disappears but the menu screen will be restored if pressing any key. Measurement point
: LINE OUT VIDEO (75 Ω terminating resistance) Measuring instrument : Oscilloscope Adjustment device : RV401 on MB-82/85 board Specified value : 1.0 ± 0.02 Vpp
6-10 6-10E
1.0 ± 0.02 Vp-p
DVP-S325/S525D/S725D SECTION 7 ELECTRICAL ADJUSTMENT 7-1. POWER SUPPLY ADJUSTMENT
In making adjustment, refer to 7-3. Adjustment Related Parts Arrangement.
1. HS-030SH Board Note: During diagnostic check, the characters and color bars can be seen only with the NTSC monitor. Therefore, for diagnostic check, use the monitor that supports both NTSC and PAL modes. Use the reference disc for PAL for check, and use the reference disc for NTSC for adjustment.
Mode
E-E
Instrument
Digital voltmeter
+5 V Check Test point
CN202 pin 5
Specification
5.0 ± 0.2 Vdc
This section describes procedures and instructions necessary for adjusting electrical circuits in this set.
+3.3 V Check Test point
CN202 pin 7
Instruments required: 1) Color monitor TV 2) Oscilloscope 1 or 2 phenomena, band width over 100 MHz, with delay mode 3) Frequency counter (over 8 digits) 4) Digital voltmeter 5) Standard commander (RMT-D108O/D108P/D109P/D111O/ D111P) 6) DVD reference disc HLX-501 (J-6090-071-A) (dual layer) (NTSC) HLX-503 (J-6090-069-A) (single layer) (NTSC) HLX-504 (J-6090-088-A) (single layer) (NTSC) HLX-505 (J-6090-089-A) (dual layer) (NTSC) HLX-506 (J-6090-077-A) (single layer) (PAL) HLX-507 (J-6090-078-A)(dual layer) (PAL) 7) SACD reference disc HLXA-509 (J-6090-090-A)
Specification
3.3 ± 0.2 Vdc
EVER+5 V Check Test point
CN203 pin 2
Specification
5.0 ± 0.2 Vdc
P_CONT Check Test point
CN203 pin 1
Specification
4V – 5 Vdc
A +12 V Check Test point
CN202 pin 1
Specification
9.5 –0.5 Vdc
+1.5
–12 V Check Test point
CN203 pin 5
Specification
–12.0 ± 1.0 Vdc
M +12 V Check Test point
CN202 pin 2
Specification
12.0 ± 1.0 Vdc
Checking method: 1) Confirm that each voltage satisfies the specification.
7-1
3. Checking Component Video Output B-Y (MB-82/85 BOARD) (DVP-S525D: Australian/S725D)
7-2. ADJUSTMENT OF VIDEO SYSTEM 1. Video Level Adjustment (MB-82/85 BOARD)
Mode
Video level adjustment in test mode
Signal
Color bars
Signal
Color bars
Test point
LINE OUT (VIDEO) connector (75 Ω terminated)
Test point
COMPONENT VIDEO OUT (B-Y) connector (75 Ω terminated)
Instrument
Oscilloscope
Instrument
Oscilloscope
Adjusting element
RV401
Specification
700 ± 70 mVp-p
Specification
1.0 ± 0.02 Vp-p
Mode
Checking method: 1) Confirm that the B-Y level is 700 ± 70 mVp-p.
Adjusting method: 1) In the test mode initial menu “6” Video Level Adjustment, set so that color bars are generated. 2) Adjust the RV401 to attain 1.0 ± 0.02 Vp-p.
700 ± 70 mVp-p
1.0 ± 0.02 Vp-p
Figure 7-3 4. Checking Component Video Output R-Y (MB-82/85 BOARD) (DVP-S525D: Australian/S725D)
Figure 7-1 2. S-terminal Output Check (MB-82/85 BOARD)
Mode
Video level adjustment in test mode
Video level adjustment in test mode
Signal
Color bars
Signal
Color bars
Test point
Test point
S VIDEO OUT (S-Y) connector (75 Ω terminated)
COMPONENT VIDEO OUT (R-Y) connector (75 Ω terminated)
Instrument
Oscilloscope
Instrument
Oscilloscope
Specification
700 ± 70 mVp-p
Specification
1.0 ± 0.1 Vp-p Checking method: 1) Confirm that the R-Y level is 700 ± 70 mVp-p.
Checking method: 1) In the test mode initial menu “6” Video Level Adjustment, set so that color bars are generated. 2) Confirm that the S-Y level is 1.0 ± 0.1 Vp-p.
700 ± 70 mVp-p
1.0 ± 0.1 Vp-p
Figure 7-4 Figure 7-2
7-2
5. Checking Component Video Output Y (MB-82/85 BOARD) (DVP-S525D: Australian/S725D)
Video level adjustment in test mode
Signal
Color bars
Test point
COMPONENT VIDEO OUT (Y) connector (75 Ω terminated)
Instrument
Oscilloscope
Specification
1.0 ± 0.1 Vp-p
7. Checking RGB Output G (MB-85 BOARD) (EXCEPT Australian model)
Mode
Checking method: 1) Confirm that the Y level is 1.0 ± 0.1 Vp-p.
In test mode, Push [0] for Syscon Diagnosis and push [7] for Video and push [5] for RGB out
Signal
Color bars
Test point
EURO AV 1 (RGB)-TV connector pin !¡ (75 Ω terminated)
Instrument
Oscilloscope
Specification
700 ± 70 mVp-p
Checking method: 1) Confirm that the G level is 700 ± 70 mVp-p. 1.0 ± 0.1 Vp-p
700 ± 70 mVp-p
Figure 7-5
Figure 7-7
6. Checking RGB Output R (MB-85 BOARD) (EXCEPT Australian model)
Mode
In test mode, Push [0] for Syscon Diagnosis and push [7] for Video and push [5] for RGB out
Signal
Color bars
Test point
EURO AV 1 (RGB)-TV connector pin !∞ (75 Ω terminated)
Instrument
Oscilloscope
Specification
700 ± 70 mVp-p
8. Checking RGB Output B (MB-85 BOARD) (EXCEPT Australian model)
Checking method: 1) Confirm that the R level is 700 ± 70 mVp-p.
Mode
In test mode, Push [0] for Syscon Diagnosis and push [7] for Video and push [5] for RGB out
Signal
Color bars
Test point
EURO AV 1 (RGB)-TV connector pin 7 (75 Ω terminated)
Instrument
Oscilloscope
Specification
700 ± 70 mVp-p
Checking method: 1) Confirm that the B level is 700 ± 70 mVp-p. 700 ± 70 mVp-p
700 ± 70 mVp-p
Figure 7-6
Figure 7-8
7-3
9. Checking S Video Output S-C (MB-82/85 BOARD)
Video level adjustment in test mode
Signal
Color bars
Test point
S VIDEO OUT (S-C) connector (75 Ω terminated)
Instrument
Oscilloscope
Specification
286 ± 50 mVp-p (NTSC) 300 ± 100 mVp-p (PAL)
Checking method: 1) In the test mode initial menu “6” Video Level Adjustment, set so that color bars are generated. 2) Confirm that the S-C burst is 300 ± 100 mVp-p.
300 ± 100 mVp-p
Figure 7-9
7-4
7-3. ADJUSTMENT RELATED PARTS ARRANGEMENT MB-82/85 BOARD (SIDE A)
CN005 28 27
2
1
RV401 VIDEO LEVEL ADJ
HS-030SH BOARD (SIDE A) 1 6 1 CN203
7 CN202
7-6 E
DVP-S325/S525D/S725D SECTION 8 REPAIR PARTS LIST 8-1.
EXPLODED VIEWS
NOTE: • -XX and -X mean standardized parts, so they may have some difference from the original one. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • Abbreviation E12B : Black type in E model E12S : Silver type in E model
• The mechanical parts with no reference number in the exploded views are not supplied. • Hardware (# mark) list and accessories and packing materials are given in the last of the electrical parts list.
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
8-1-1. CASE ASSEMBLY (S325/S525D)
5 4 4
7 4
8
3 3
2
1
6 Front panel section
Ref. No.
Part No.
Description
1 2 3 4 5
3-975-726-41 3-053-498-01 3-970-608-01 3-710-901-41 3-053-510-01
EMBLEM, DVD COVER (BK), TRAY SUMITITE (B3), +BV SCREW, TAPPING (BLACK) CASE, TOP
6
3-973-973-01 FOOT (S)
Remark
Ref. No. 7 7 7 8
8-1
Part No.
Description
Remark
1-418-320-31 COMMANDER, STANDARD (RMT-D108P) (S525D: EXCEPT Australian) 1-418-320-71 COMMANDER, STANDARD (RMT-D109P) (S325) 1-418-320-81 COMMANDER, STANDARD (RMT-D108O) (S525D: Australian) 3-053-633-01 COVER, BATTERY (for RMT-D108O/D108P/D109P)
8-1-2. CASE ASSEMBLY (S725D)
56 55 57
59 55
60 54 54
61
58
53
52
58
51 #1
Front panel section
Ref. No.
Remark
#1
Part No.
Description
Ref. No.
51 52 52 53 53
3-053-493-01 3-053-492-11 3-053-492-21 3-975-726-31 3-975-726-41
ORNAMENT (M), TRAY ORNAMENT (AL), TRAY (BLACK) ORNAMENT (AL), TRAY (SILVER) EMBLEM, DVD (SILVER) EMBLEM, DVD (BLACK)
57 58 59
54 55 55 56 56
3-970-608-01 3-710-901-41 3-710-901-51 X-3949-707-1 X-3949-708-1
SUMITITE (B3), +BV SCREW, TAPPING (BLACK) SCREW, TAPPING (SILVER) CASE ASSY, TOP (BLACK) CASE ASSY, TOP (SILVER)
60
3-053-984-01 SCREW (+BV/CU) X-3945-872-1 FOOT ASSY 1-418-321-31 COMMANDER, STANDARD (RMT-D111P) (EXCEPT Australian) 1-418-321-81 COMMANDER, STANDARD (RMT-D111O) (Australian) 3-055-539-01 COVER, BATTERY (for RMT-D111O/D111P)
61 61
X-3949-298-1 COVER ASSY, TRAY (SILVER) X-3949-299-1 COVER ASSY, TRAY (BLACK)
59
8-2
Part No.
Description
Remark
8-1-3. FRONT PANEL ASSEMBLY 125
Ref. No.
116
124
not supplied
116
S525D/S725D 116 not supplied
121
116
122 127 119
120
104
105
116
116
123
109
115
128
108
126
116 114 102
101
111 110
115
117 104
105
106
Ref. No. * 122
103 103 104 104 104
3-974-997-31 3-974-997-51 4-942-568-01 4-942-568-61 4-963-404-21
WINDOW, REMOTE CONTROL (BLACK) WINDOW, REMOTE CONTROL (SILVER) EMBLEM (NO.5), SONY (BLACK) (S725D) EMBLEM (NO.5), SONY (SILVER) (S725D) EMBLEM (5-A), SONY (S325/S525D)
* 122
105 106 106 107 107
3-988-030-51 X-3949-309-1 X-3949-311-1 3-053-479-01 3-053-479-21
BUTTON, POWER BUTTON (VES) ASSY (BLACK) BUTTON (VES) ASSY (SILVER) BUTTON (PROG) (BLACK) BUTTON (PROG) (SILVER)
108 108 109 109 110
3-053-517-01 3-053-517-21 3-053-480-01 3-053-480-21 3-053-504-01
BUTTON (OPEN) (BLACK) BUTTON (OPEN) (SILVER) BUTTON (PLAY) (BLACK) BUTTON (PLAY) (SILVER) CUSHION
111 112 112 113 113
4-981-435-11 X-3949-294-1 X-3949-313-1 3-053-482-01 3-053-482-41
RING (DIA. 50), ORNAMENTAL RING ASSY, SHUTTLE (BLACK) RING ASSY, SHUTTLE (SILVER) KNOB (ACS) (BLACK) KNOB (ACS) (SILVER)
* 124
114 114 115 116 117
3-988-016-01 3-988-016-61 1-418-097-11 4-951-620-01 1-771-564-11
STICK, CURSOR (BLACK) STICK, CURSOR (SILVER) ENCODER, ROTARY SCREW (2.6X8), +BVTP SWITCH, TACTILE
127 * 128
118 119 119 120 * 121
3-053-496-31 3-945-284-51 3-945-284-81 2-118-268-01 3-684-436-01
STICK (L), CURSOR KNOB, VOLUME (BLACK) KNOB, VOLUME (SILVER) NUT (M9), HEXAGON PLATE, MOUNT
* 122 * 122
* 123
* 123 * 123
* 124
* 124
* 124 125 126
107 114
116 103
103
111 110
* 128 * 128
108
108
116
* 128
* 128
102 109
109 102
101
101
111
113
110 118
Remark
Part No.
Description
Remark
A-6065-229-A HP-108 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-252-A HP-110 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-257-A HP-109 BOARD, COMPLETE (S725D: Australian) A-6065-234-A HP-111 BOARD, COMPLETE (S525D: Australian) A-6065-230-A SW-314 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-243-A SW-315 BOARD, COMPLETE (S725D: Australian) A-6065-221-A SW-317 BOARD, COMPLETE (S525D: Australian) A-6065-253-A SW-316 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-228-A FR-147 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-241-A FR-148 BOARD, COMPLETE (S725D: Australian) A-6065-218-A FR-150 BOARD, COMPLETE (S525D: Australian) A-6065-251-A FR-149 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-268-A FR-147 BOARD, COMPLETE (S325) 3-054-216-01 PLATE (SL), GROUND 3-053-512-01 PLATE (S), GROUND
S525D
112
104
PANEL ASSY, FRONT (S525D) PANEL ASSY, FRONT (S325) PANEL ASSY, FRONT (BLACK) (S725D) PANEL ASSY, FRONT (SILVER) (S725D) WINDOW (FL)
* 124
103 111 110
Description
X-3949-303-3 X-3949-305-1 X-3949-308-3 X-3949-511-3 3-053-483-01
* 123
S525D/S725D
106 107
Part No.
101 101 101 101 102
S725D
112
S325
8-3
8-4
1-790-167-11 CABLE, FLEXIBLE FLAT (FMF-35) A-6065-227-A FL-98 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-240-A FL-99 BOARD, COMPLETE (S725D: Australian) A-6065-223-A FL-101 BOARD, COMPLETE (S525D: Australian) A-6065-250-A FL-100 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-267-A FL-98 BOARD, COMPLETE (S325)
8-1-4. CHASSIS ASSEMBLY 160 S725D
152 not supplied 152 152
163
Ref. No.
Part No.
* 151
A-6065-231-A MB-85 BOARD, COMPLETE (S525D: EXCEPT Russian, Australian) A-6065-232-A MB-85 BOARD, COMPLETE (S525D: Russian) A-6065-246-A MB-85 BOARD, COMPLETE (S725D: Russian) A-6065-247-A MB-82 BOARD, COMPLETE (S725D: Australian) A-6065-235-A MB-82 BOARD, COMPLETE (S525D: Australian)
* 151
T901 * 151
163 * 151 * 151
164
163
160 163
152
152
* 151
Mechanism deck S525D: Australian
* 151 * 151 * 151
160 163
162
152
S725D: EXCEPT Australian
S725D
161
not supplied
163
163 160
163
156
* 158
(S525D)
not supplied
152 153 154 155
* 157 * 158
163
159 157
* 151
163
not supplied
S725D: Australian
163
152
163
* 158
Description
Remark
Ref. No. * 158 * 158 * 159 160 160 160
A-6065-254-A MB-85 BOARD, COMPLETE (S725D: EXCEPT E, Russian, Australian) A-6065-269-A MB-85 BOARD, COMPLETE (S325: EXCEPT Russian) A-6065-270-A MB-85 BOARD, COMPLETE (S325: Russian) A-6065-324-A MB-85 BOARD, COMPLETE (S725D: E12B) A-6065-387-A MB-85 BOARD, COMPLETE (S725D: E12S) SUMITITE (B3), +BV CABLE, FLEXIBLE FLAT (FMT-25) CABLE, FLEXIBLE FLAT (FMA-7) CABLE, FLEXIBLE FLAT (FMA-8) (S525D/S725D) 1-790-165-11 CABLE, FLEXIBLE FLAT (FMA-9) (S525D/S725D)
169 ! T901
158 163 S325/S525D: EXCEPT Australian
156 155
S725D
S525D/S725D S525D/S725D
168
not supplied
154
B
153
A
167
not supplied
167
152
151 167
166 165
A
156
B
not supplied
EXCEPT Australian
8-5
BUSHING (FBS001), CORD SUMITITE (B3), +BV RY-12 BOARD, COMPLETE (S725D) ER-4 BOARD, COMPLETE (S325/S525D: EXCEPT Australian) A-6065-249-A ER-5 BOARD, COMPLETE (S725D: EXCEPT Australian) 1-790-168-11 CABLE, FLEXIBLE FLAT (FEA-4) (S725D: EXCEPT Australian) 1-790-408-11 CABLE, FLEXIBLE FLAT (FME-4) (S325/S525D: EXCEPT Australian) 3-055-791-01 SUMITITE (B3), (RING), +BV (S725D) 3-970-608-01 SUMITITE (B3), +BV (S325/S525D) 3-055-418-01 COVER, EJECT 3-054-650-01 SPRING, EMC 1-431-175-21 TRANSFORMER, POWER (S725D)
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
not supplied
not supplied
4-966-267-11 3-970-608-51 A-6065-255-A A-6065-226-A
167 167 168
163
157
162 163 * 164 * 165
166
152
Remark
160 160 ! 161 ! 161
166
3-669-610-00 SPACER A-6065-225-A AU-209 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-248-A AU-211 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-261-A AU-210 BOARD, COMPLETE (S725D: Australian)
Description
A-6065-233-A AU-212 BOARD, COMPLETE (S525D: Australian) A-6065-266-A AU-209 BOARD, COMPLETE (S325) 1-468-359-11 POWER BLOCK (HS-030SH) 3-053-507-21 PANEL, REAR (S525D: EXCEPT Australian) 3-053-507-71 PANEL, REAR (S325) X-3949-703-1 PANEL ASSY, REAR (S725D: EXCEPT Australian) X-3949-711-1 PANEL ASSY, REAR (S725D: Australian) 3-053-507-91 PANEL, REAR (S525D: Australian) 1-769-744-91 CORD, POWER (EXCEPT Australian) 1-790-588-11 CORD, POWER (Australian)
* 165
3-970-608-01 1-790-166-11 1-790-163-11 1-790-164-11
Part No.
167 169
8-6
8-1-5. MECHANISM DECK ASSEMBLY 219
220
219
218 219 218 218
217 #3
216
210
211 207 209 205
215
208
204
206 214
#2
203
M001
212
213 222
221
201
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
202 Ref. No.
Part No.
Description
* 201 * 201 202 203 204
A-6065-214-A TK-51 BOARD, COMPLETE (Australian) A-6065-256-A TK-54 BOARD, COMPLETE (EXCEPT Australian) A-6062-120-A LOADING ASSY 3-053-837-01 TRAY 3-053-841-01 PULLEY GEAR
205 206 207 208 209
3-053-840-01 3-053-839-01 4-974-711-01 3-053-842-01 3-053-849-01
210 211
3-053-838-01 CHUCK CAM 3-053-836-01 BASE UNIT HOLDER
CAM DRIVING GEAR TRAY DRIVING GEAR SCREW (2X5) (P TYIGHT), (+) PTTWH BELT SPRING, TENSION
Remark
Ref. No.
Part No.
Description
212 * 213 214 215 216
3-053-835-01 A-6066-012-A 3-053-845-01 3-053-844-01 3-053-848-01
BASE, LOADING MS-29 BOARD, COMPLETE CHUCK PLATE YOKE CHUCK HOLDER
217 218 219 ! 220 221
3-053-846-01 3-053-847-01 4-981-923-01 8-820-081-03 3-053-843-01
YOKE HOLDER INSULATOR SCREW (M), STEP OPTICAL PICK-UP KHM-220AAA/J1RP MOTOR PULLEY
222 M001
8-7
3-055-097-01 SEAL,DUST TRAY 1-541-632-11 MOTOR, DC (LOADING)
Remark
AU-209
AU-212
8-2. ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. • -XX and -X mean standardized parts, so they may have some difference from the original one. • RESISTORS All resistors are in ohms. METAL: Metal-film resistor. METAL OXIDE: Metal oxide-film resistor. F: nonflammable • Not all of the parts for POWER BLOCK (HS030SH) are listed. • Abbreviation E12B : Black type in E model E12S : Silver type in E model Ref. No.
Part No.
*
A-6065-225-A AU-209 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-266-A AU-209 BOARD, COMPLETE (S325) A-6065-233-A AU-212 BOARD, COMPLETE (S525D: Australian) ********************** (Ref. No. 2,000 Series)
* *
Description
Remark
Ref. No.
1-126-926-11 1-163-021-91 1-163-021-91 1-163-239-11 1-163-239-11
ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
1000uF 0.01uF 0.01uF 33PF 33PF
C307 C308 C309
1-163-239-11 CERAMIC CHIP 1-163-251-11 CERAMIC CHIP 1-163-251-11 CERAMIC CHIP
33PF 100PF 100PF
C310 C311
1-163-251-11 CERAMIC CHIP 1-163-251-11 CERAMIC CHIP
100PF 100PF
C312
1-163-239-11 CERAMIC CHIP
33PF
C313
1-163-239-11 CERAMIC CHIP
33PF
C314
1-163-239-11 CERAMIC CHIP
33PF
C315
1-126-935-11 ELECT
470uF
C316
1-104-665-11 ELECT
100uF
C317
1-126-935-11 ELECT
470uF
C318
1-104-665-11 ELECT
100uF
C319
1-126-935-11 ELECT
470uF
C320
1-104-665-11 ELECT
100uF
C321
1-104-665-11 ELECT
100uF
C322 C323 C324 C325 C326
1-104-665-11 1-164-004-11 1-126-935-11 1-126-935-11 1-104-664-11
100uF 0.1uF 470uF 470uF 47uF
ELECT CERAMIC CHIP ELECT ELECT ELECT
Part No.
When indicating parts by reference number, please include the board.
Description
Remark
C327 C328
1-163-021-91 CERAMIC CHIP 1-104-664-11 ELECT
C329
1-163-021-91 CERAMIC CHIP
C343 C344
1-163-259-91 CERAMIC CHIP 1-126-960-11 ELECT
10% 50V 20% 16V (S525D: Australian) 0.01uF 10% 50V (S525D: Australian) 220PF 5% 50V 1uF 20% 50V
C345 C350
1-163-021-91 CERAMIC CHIP 1-163-233-11 CERAMIC CHIP
0.01uF 18PF
C351 C352 C353
1-163-233-11 CERAMIC CHIP 1-163-233-11 CERAMIC CHIP 1-163-233-11 CERAMIC CHIP
18PF 18PF 18PF
5% 50V 5% 50V 5% 50V (S525D: Australian) 5% 50V 5% 50V (S525D: Australian)
C354
1-163-233-11 CERAMIC CHIP
18PF
C355
1-163-233-11 CERAMIC CHIP
18PF
C401
1-104-665-11 ELECT
100uF
C404
1-104-665-11 ELECT
100uF
5% 50V (S525D: Australian) 5% 50V (S525D: Australian) 5% 50V (S525D: Australian) 20% 6.3V (S525D: Australian) 20% 10V (S525D: Australian)
C431
1-104-664-11 ELECT
47uF
C432 C433 C434 C435 C436
1-104-664-11 1-104-665-11 1-163-021-91 1-104-665-11 1-163-131-00
ELECT ELECT CERAMIC CHIP ELECT CERAMIC CHIP
47uF 100uF 0.01uF 100uF 390PF
20% 20% 10% 20% 5%
16V 10V 50V 10V 50V
C437 C438 C439 C440 C442
1-163-021-91 1-163-131-00 1-163-133-00 1-163-021-91 1-163-133-00
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 390PF 470PF 0.01uF 470PF
10% 5% 5% 10% 5%
50V 50V 50V 50V 50V
C443 C447 C448 C449 C450
1-163-021-91 1-136-850-11 1-104-664-11 1-104-664-11 1-136-850-11
CERAMIC CHIP FILM ELECT ELECT FILM
0.01uF 0.1uF 47uF 47uF 0.1uF
10% 5% 20% 20% 5%
50V 63V 16V 16V 63V
C501
1-104-664-11 ELECT
47uF
20%
C502
1-104-664-11 ELECT
47uF
20%
C503
1-163-021-91 CERAMIC CHIP
0.01uF
10%
16V (S525D) 16V (S525D) 50V (S525D)
< CAPACITOR > C302 C303 C304 C305 C306
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
• Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • SEMICONDUCTORS In each case, u: µ, for example: uA. . : µA. . uPA. . : µPA. . uPB. . : µPB. . uPC. . : µPC. . uPD. . : µPD. . • CAPACITORS uF: µF • COILS uH: µH
20% 10% 10% 5% 5%
10V 50V 50V 50V 50V
20% 6.3V (S525D: Australian) 20% 10V (S525D: Australian) 20% 6.3V (S525D: Australian) 20% 10V (S525D: Australian) 20% 10V 20% 10% 20% 20% 20%
10V 25V 6.3V 6.3V 16V
8-8
0.01uF 47uF
10% 50V 5% 50V (S525D: Australian) 5% 50V 5% 50V 5% 50V (S525D: Australian) 5% 50V (S525D: Australian) 5% 50V (S525D: Australian) 20% 10V (S525D) 20% 10V (S525D) 20% 16V
AU-209 Ref. No.
Part No.
Description
Remark
C504
1-163-131-00 CERAMIC CHIP
390PF
5%
C505
1-163-131-00 CERAMIC CHIP
390PF
5%
C506
1-163-021-91 CERAMIC CHIP
0.01uF
10%
C507
1-163-133-00 CERAMIC CHIP
470PF
5%
C508
1-163-133-00 CERAMIC CHIP
470PF
5%
C509
1-136-850-11 FILM
0.1uF
5%
C512
1-136-850-11 FILM
0.1uF
5%
C513
1-104-664-11 ELECT
47uF
20%
C514
1-104-664-11 ELECT
47uF
20%
C521
1-163-251-11 CERAMIC CHIP
100PF
5%
C522
1-163-251-11 CERAMIC CHIP
100PF
5%
C523
1-163-251-11 CERAMIC CHIP
100PF
5%
C524
1-163-251-11 CERAMIC CHIP
100PF
5%
C525
1-163-251-11 CERAMIC CHIP
100PF
5%
C526
1-163-251-11 CERAMIC CHIP
100PF
5%
C541
1-104-664-11 ELECT
47uF
20%
C542
1-104-664-11 ELECT
47uF
20%
C543
1-163-130-00 CERAMIC CHIP
360PF
5%
C544
1-163-275-11 CERAMIC CHIP
0.001uF
5%
C545
1-163-021-91 CERAMIC CHIP
0.01uF
10%
C546
1-163-130-00 CERAMIC CHIP
360PF
5%
C547
1-163-275-11 CERAMIC CHIP
0.001uF
5%
C548
1-163-021-91 CERAMIC CHIP
0.01uF
10%
C549
1-104-664-11 ELECT
47uF
20%
C550
1-104-664-11 ELECT
47uF
20%
C571
1-104-664-11 ELECT
47uF
20%
C572
1-104-664-11 ELECT
47uF
20%
C573
1-163-130-00 CERAMIC CHIP
360PF
5%
C574
1-163-020-00 CERAMIC CHIP
0.0082uF 10%
C575
1-163-021-91 CERAMIC CHIP
0.01uF
C576
1-163-145-00 CERAMIC CHIP
0.0015uF 5%
C577
1-163-275-11 CERAMIC CHIP
0.001uF
10%
5%
Ref. No.
50V (S525D) 50V (S525D) 50V (S525D) 50V (S525D) 50V (S525D) 63V (S525D) 63V (S525D)
Description
Remark
C578
1-163-021-91 CERAMIC CHIP
C579
1-104-664-11
C580
1-104-664-11
C590
1-164-004-11
C591
1-163-233-11
0.01uF
10%
50V (S525D) ELECT 47uF 20% 16V (S525D) ELECT 47uF 20% 16V (S525D) CERAMIC CHIP 0.1uF 10% 25V (S325/S525D: EXCEPT Australian) CERAMIC CHIP 18PF 5% 50V (S325/S525D: EXCEPT Australian) < CONNECTOR >
CN301 CN302 CN303 CN305
16V (S525D) 16V (S525D) 50V (S525D) 50V (S525D) 50V (S525D)
CN401
1-785-698-11 1-785-695-11 1-785-694-11 1-785-697-11
CONNECTOR, FFC/FPC 28P CONNECTOR, FFC/FPC 13P (S525D) CONNECTOR, FFC/FPC 7P(S525D: Australian) CONNECTOR, FFC/FPC 18P (S325/S525D: EXCEPT Australian) 1-564-002-11 PIN, CONNECTOR 3P (S525D) < DIODE >
50V (S525D) 50V (S525D) 50V (S525D) 16V (S525D) 16V (S525D) 50V (S525D) 50V (S525D) 50V (S525D) 50V (S525D) 50V (S525D)
Part No.
AU-212
D301 D304 D305 D306 D307
8-719-988-61 8-719-071-15 8-719-071-15 8-719-071-15 8-719-071-15
DIODE DIODE DIODE DIODE DIODE
1SS355TE-17 HZM6.8ZWA1TL HZM6.8ZWA1TL (S525D: Australian) HZM6.8ZWA1TL HZM6.8ZWA1TL (S525D: Australian)
D308 D431 D432 D525 D526
8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61
DIODE DIODE DIODE DIODE DIODE
1SS355TE-17 1SS355TE-17 1SS355TE-17 1SS355TE-17 (S525D) 1SS355TE-17 (S525D)
D551 D552 D591 D592
8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61
DIODE DIODE DIODE DIODE
1SS355TE-17 (S525D) 1SS355TE-17 (S525D) 1SS355TE-17 (S525D) 1SS355TE-17 (S525D)
< EARTH TERMINAL > * ET301 * ET302 * ET303
50V (S525D) 16V (S525D) 16V (S525D) 16V (S525D) 16V (S525D) 50V (S525D) 50V (S525D) 50V (S525D) 50V (S525D) 50V (S525D)
8-9
1-537-738-21 TERMINAL, EARTH 1-537-738-21 TERMINAL, EARTH 1-537-738-21 TERMINAL, EARTH < FERRITE BEAD >
FB305 FB306 FB307 FB308 FB309
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH (S525D: Australian) 0uH 0uH 0uH 0uH (S325/S525D: EXCEPT Australian)
FB310 FB311 FB312 FB313 FB314
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH (S525D: Australian) 0uH
FB315 FB316 FB317 FB318 FB319
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH (S525D: Australian) 0uH 0uH (S525D: Australian) 0uH (S525D: Australian) 0uH (S525D: Australian)
FB320 FB321 FB322 FB323
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE
FB341
1-414-135-11 FERRITE
0uH (S525D: Australian) 0uH 0uH 0uH (S325/S525D: EXCEPT Australian) 0uH
AU-209 Ref. No.
AU-212
Part No.
Description
FB342 FB401 FB402 FB403 FB404
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH (S525D) 0uH (S525D) 0uH (S525D) 0uH (S525D)
Remark
FB405 FB406 FB407 FB408 FB409
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH (S525D) 0uH (S525D) 0uH (S525D) 0uH (S525D) 0uH (S525D)
Ref. No.
< IC > IC301 IC302 IC303 IC321 IC401
8-759-701-58 8-759-982-54 8-759-563-79 8-759-563-79 8-759-909-71
IC IC IC IC IC
NJM78M08FA RC79M09FA BA7660F-E2 (S525D: Australian) BA7660F-E2 BA4558F (S525D)
IC431 IC502 IC505 IC541 IC571
8-759-909-71 8-759-909-71 8-749-921-12 8-759-909-71 8-759-909-71
IC IC IC IC IC
BA4558F BA4558F (S525D) GP1F32T BA4558F (S525D) BA4558F (S525D)
Part No.
Description
JR414 JR415 JR415
1-216-296-91 SHORT 1-216-295-91 SHORT 1-216-296-91 SHORT
JR416 JR417
1-216-296-91 SHORT 1-216-295-91 SHORT
JR418
1-216-295-91 SHORT
JR418 JR419 JR420 JR420
1-216-296-91 1-216-296-91 1-216-295-91 1-216-296-91
JR421
1-216-295-91 SHORT
JR421 JR422 JR423 JR424
1-216-296-91 1-216-296-91 1-216-295-91 1-216-296-91
SHORT SHORT SHORT SHORT
JR425 JR426 JR427 JR427
1-216-295-91 1-216-295-91 1-216-295-91 1-216-296-91
SHORT SHORT SHORT SHORT
JR428
1-216-295-91 SHORT
JR428
1-216-296-91 SHORT
JR429 JR430 JR431 JR432
1-216-296-91 1-216-296-91 1-216-295-91 1-216-295-91
JR433 JR433
1-216-295-91 SHORT 1-216-296-91 SHORT
JR434 JR434
1-216-295-91 SHORT 1-216-296-91 SHORT
JR435
1-216-296-91 SHORT
JR436
1-216-295-91 SHORT
JR437
1-216-295-91 SHORT
JR438
1-216-296-91 SHORT
JR439
1-216-296-91 SHORT
JR446
1-216-295-91 SHORT
JR447
1-216-295-91 SHORT
SHORT SHORT SHORT SHORT
< JACK > J303 J502 J505 J506 J507
J508
1-784-675-21 JACK, PIN 3P (COMPONENT VIDEO OUT) (S525D: Australian) 1-779-382-11 JACK, PIN 1P (COAXIAL) 1-785-535-11 JACK BLOCK, PIN (LINE OUT/S VIDEO OUT) (S525D: Australian) 1-785-537-11 JACK, PIN (3P) (LINE OUT) (S325/S525D: EXCEPT Australian) 1-537-943-11 TERMINAL, S (S VIDEO OUT) (S325/S525D: EXCEPT Australian)
SHORT SHORT SHORT SHORT
1-785-536-11 JACK, PIN (6P) (5.1CH OUTPUT) (S525D) < JUMPER RESISTOR >
JR400 JR401 JR401
1-216-295-91 SHORT 1-216-295-91 SHORT 1-216-296-91 SHORT
0 (S525D: Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian)
JR402 JR402
1-216-295-91 SHORT 1-216-296-91 SHORT
JR403 JR404 JR405 JR406 JR406
1-216-295-91 1-216-295-91 1-216-296-91 1-216-295-91 1-216-296-91
SHORT SHORT SHORT SHORT SHORT
0 0 0 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian)
JR407 JR408 JR409 JR409
1-216-296-91 1-216-295-91 1-216-295-91 1-216-296-91
SHORT SHORT SHORT SHORT
JR410
1-216-296-91 SHORT
0 0 (S525D: Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0
JR411
1-216-295-91 SHORT
JR411 JR412
1-216-296-91 SHORT 1-216-295-91 SHORT
JR412 JR413
1-216-296-91 SHORT 1-216-296-91 SHORT
0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0
8-10
Remark 0 (S525D: Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0 0 (S525D: Australian) 0 0 0 (S525D: Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 0 (S525D: Australian) 0 (S525D: Australian) 0 (S525D: Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S525D: Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian)
< COIL > L301 L302 L303 L304 L305
1-412-953-11 1-412-953-11 1-412-953-11 1-412-953-11 1-412-953-11
INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR
L306 L307 L321
1-412-953-11 INDUCTOR 1-412-963-11 INDUCTOR 1-412-963-11 INDUCTOR
15uH 15uH 15uH 15uH (S525D: Australian) 15uH (S525D: Australian) 15uH (S525D: Australian) 100uH (S525D: Australian) 100uH
AU-209 Ref. No.
Part No.
Description
Remark
Ref. No.
< TRANSISTOR >
R310 R311
Q301 Q303 Q304 Q305 Q306
8-729-424-08 8-729-216-22 8-729-421-19 8-729-424-08 8-729-424-08
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2111 2SA1162 UN2213 UN2111 UN2111 (S525D)
Q307 Q308 Q309 Q310 Q311
8-729-424-08 8-729-424-08 8-729-424-08 8-729-424-08 8-729-424-08
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2111 (S525D) UN2111 (S525D) UN2111 (S525D) UN2111 (S525D) UN2111 (S525D)
Q314 Q315 Q321 Q322 Q341
8-729-424-08 8-729-421-19 8-729-421-19 8-729-424-08 8-729-120-28
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2111 (S525D) UN2213 (S525D) UN2213 UN2111 2SC1623-L5L6
Q401
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q402
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q431
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q432
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q435
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q436 Q503
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO 8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q504
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q543
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Part No.
Description
Remark
1-216-042-00 METAL CHIP
510
R312
1-216-042-00 METAL CHIP
510
R313
1-216-097-91 RES, CHIP
100K
R314
1-216-097-91 RES, CHIP
100K
R315
1-216-097-91 RES, CHIP
100K
R316
1-216-097-91 RES, CHIP
100K
R317
1-216-073-00 METAL CHIP
10K
(S525D)
R318 R319
1-216-097-91 RES, CHIP 1-216-097-91 RES, CHIP
100K 100K
(S525D)
R320
1-216-097-91 RES, CHIP
100K
(S525D)
R321
1-216-073-00 METAL CHIP
10K
(S525D)
R322 R323 R324 R325
1-216-073-00 1-216-021-00 1-216-021-00 1-216-021-00
10K 68 68 68
(S525D)
R325
1-216-295-91 SHORT
R326 R327 R328 R330 R333
1-216-021-00 1-216-021-00 1-216-021-00 1-216-073-00 1-216-049-91
R334
R311
AU-212
5% 1/10W (S525D: Australian) 1-216-042-00 METAL CHIP 510 5% 1/10W (S525D: Australian) 1-216-097-91 RES, CHIP 100K 5% 1/10W (S325/S525D: EXCEPT Australian)
METAL CHIP METAL CHIP METAL CHIP METAL CHIP
5% 1/10W (S525D: Australian) 5% 1/10W (S525D) 5% 1/10W (S525D) 5% 1/10W (S525D) 5% 1/10W (S525D) 5% 1/10W (S525D: Australian) 5% 1/10W 5% 1/10W (S525D) 5% 1/10W (S525D) 5% 1/10W 5% 1/10W 5% 1/10W 5% 1/10W 5% 1/10W (S525D: Australian)
0 (S325/S525D: EXCEPT Australian)
(S525D) (S525D) Q544
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO (S525D)
Q573
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
Q574
8-729-046-97 TRANSISTOR 2SD1938 (F)-T (TX).SO
METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP
68 68 68 10K 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W (S525D)
1-216-097-91 RES, CHIP
100K
5%
R341 R342 R343 R344
1-216-057-00 1-216-063-91 1-216-055-00 1-216-033-00
METAL CHIP RES, CHIP METAL CHIP METAL CHIP
2.2K 3.9K 1.8K 220
5% 5% 5% 5%
1/10W (S525D) 1/10W 1/10W 1/10W 1/10W
R345 R346 R347 R348 R401
1-216-021-00 1-216-025-91 1-216-295-91 1-216-097-91 1-216-085-00
METAL CHIP RES, CHIP SHORT RES, CHIP METAL CHIP
68 100 0 100K 33K
5% 5%
1/10W 1/10W
5% 5%
1/10W 1/10W
R402
1-216-085-00 METAL CHIP
33K
5%
1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
(S525D) (S525D) < RESISTOR > R301
1-216-042-00 METAL CHIP
R302
1-216-042-00
R303 R304
1-216-042-00 1-216-021-00
R304
1-216-042-00
510
5% 1/10W (S525D: Australian) METAL CHIP 510 5% 1/10W (S525D: Australian) METAL CHIP 510 5% 1/10W METAL CHIP 68 5% 1/10W (S525D: Australian) METAL CHIP 510 5% 1/10W (S325/S525D: EXCEPT Australian)
R305
1-216-042-00 METAL CHIP
R403
1-216-085-00 METAL CHIP
33K
5%
R305
1-216-073-00
R404
1-216-085-00 METAL CHIP
33K
5%
R306
1-216-021-00
R405
1-216-085-00 METAL CHIP
33K
5%
R307 R308
1-216-073-00 1-216-021-00
R406
1-216-077-00 METAL CHIP
15K
5%
R407
1-216-077-00 METAL CHIP
15K
5%
R309
1-216-073-00 METAL CHIP
R408
1-216-085-00 METAL CHIP
33K
5%
R309
1-216-097-91 RES, CHIP
R409
1-216-025-91 RES, CHIP
100
5%
510 5% 1/10W (S325/S525D: EXCEPT Australian) METAL CHIP 10K 5% 1/10W (S525D: Australian) METAL CHIP 68 5% 1/10W (S525D: Australian) METAL CHIP 10K 5% 1/10W METAL CHIP 68 5% 1/10W (S525D: Australian) 10K 5% 1/10W (S325/S525D: EXCEPT Australian) 100K 5% 1/10W (S525D: Australian)
8-11
1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
AU-209 Ref. No.
AU-212
Part No.
Description
Remark
Ref. No.
R410
1-216-025-91 RES, CHIP
100
5%
1/10W (S525D) 1/10W (S525D)
R411
1-216-049-91 RES, CHIP
1K
5%
R412
1-216-049-91 RES, CHIP
1K
5%
R431 R432 R433 R434
1-216-109-00 1-216-069-00 1-216-069-00 1-216-109-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP
330K 6.8K 6.8K 330K
5% 5% 5% 5%
1/10W (S525D) 1/10W 1/10W 1/10W 1/10W
R435 R436 R439 R440 R441
1-216-069-00 1-216-069-00 1-216-069-00 1-216-295-91 1-216-069-00
METAL CHIP METAL CHIP METAL CHIP SHORT METAL CHIP
6.8K 6.8K 6.8K 0 (S525D) 6.8K
5% 5% 5%
1/10W 1/10W 1/10W
5%
1/10W
R443 R444 R445
1-216-057-00 METAL CHIP 1-216-057-00 METAL CHIP 1-216-049-91 RES, CHIP
2.2K 2.2K 1K
5% 5% 5%
R446
1-216-047-91 RES, CHIP
820
5%
R447
1-216-049-91 RES, CHIP
1K
5%
1/10W 1/10W 1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
R448
1-216-047-91 RES, CHIP
820
5%
R449 R450 R451 R452
1-216-109-00 1-216-109-00 1-216-041-00 1-216-041-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP
330K 330K 470 470
5% 5% 5% 5%
R455 R456 R457 R458 R459
1-216-097-91 1-216-049-91 1-216-049-91 1-216-041-00 1-216-041-00
RES, CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
100K 1K 1K 470 470
1/10W (S525D) 1/10W 1/10W 1/10W 1/10W
5% 1/10W 5% 1/10W 5% 1/10W 5% 1/10W 5% 1/10W (S525D: Australian)
1K 5% 1/10W (S325/S525D: EXCEPT Australian) METAL CHIP 470 5% 1/10W METAL CHIP 470 5% 1/10W (S525D: Australian) RES, CHIP 1K 5% 1/10W (S325/S525D: EXCEPT Australian) METAL CHIP 330K 5% 1/10W (S525D)
Part No.
Description
Remark
R522
1-216-109-00 METAL CHIP
330K
5%
R523
1-216-041-00 METAL CHIP
470
5%
R524
1-216-041-00 METAL CHIP
470
5%
R525
1-216-049-91 RES, CHIP
1K
5%
R526
1-216-025-91 RES, CHIP
100
5%
R527
1-216-025-91 RES, CHIP
100
5%
R528
1-216-049-91 RES, CHIP
1K
5%
R541
1-216-109-00 METAL CHIP
330K
5%
R542
1-216-069-00 METAL CHIP
6.8K
5%
R543
1-216-109-00 METAL CHIP
330K
5%
R544
1-216-069-00 METAL CHIP
6.8K
5%
R545
1-216-069-00 METAL CHIP
6.8K
5%
R546
1-216-069-00 METAL CHIP
6.8K
5%
R547
1-216-069-00 METAL CHIP
6.8K
5%
R548
1-216-069-00 METAL CHIP
6.8K
5%
R549
1-216-057-00 METAL CHIP
2.2K
5%
R553
1-216-057-00 METAL CHIP
2.2K
5%
R555
1-216-109-00 METAL CHIP
330K
5%
R556
1-216-109-00 METAL CHIP
330K
5%
R459
1-216-049-91 RES, CHIP
R557
1-216-041-00 METAL CHIP
470
5%
R460 R461
1-216-041-00 1-216-041-00
R558
1-216-041-00 METAL CHIP
470
5%
R461
1-216-049-91
R559
1-216-049-91 RES, CHIP
1K
5%
R501
1-216-109-00
R560
1-216-025-91 RES, CHIP
100
5%
R561
1-216-025-91 RES, CHIP
100
5%
R502
1-216-069-00 METAL CHIP
6.8K
5%
R562
1-216-049-91 RES, CHIP
1K
5%
R503
1-216-109-00 METAL CHIP
330K
5%
R504
1-216-069-00 METAL CHIP
6.8K
5%
R510
1-216-069-00 METAL CHIP
6.8K
5%
R564 R569 R571
1-216-295-91 SHORT 1-216-295-91 SHORT 1-216-109-00 METAL CHIP
0 (S525D) 0 (S525D) 330K 5%
R511
1-216-069-00 METAL CHIP
6.8K
5%
R572
1-216-109-00 METAL CHIP
330K
5%
R573
1-216-069-00 METAL CHIP
6.8K
5%
R513
1-216-069-00 METAL CHIP
6.8K
5%
R517
1-216-057-00 METAL CHIP
2.2K
5%
R574
1-216-077-00 METAL CHIP
15K
5%
R519
1-216-057-00 METAL CHIP
2.2K
5%
R575
1-216-069-00 METAL CHIP
6.8K
5%
R520
1-216-069-00 METAL CHIP
6.8K
5%
R576
1-216-077-00 METAL CHIP
15K
5%
R521
1-216-109-00 METAL CHIP
330K
5%
R577
1-216-057-00 METAL CHIP
2.2K
5%
1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
8-12
1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
AU-209 Ref. No.
Part No.
Description
Remark
Ref. No.
AU-211
Part No.
Description
1-104-664-11 1-164-004-11 1-126-967-11 1-164-346-11 1-164-346-11
ELECT CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP
47uF 0.1uF 47uF 1uF 1uF
C363 C364 C365 C366 C367
1-164-346-11 1-164-346-11 1-164-346-11 1-164-346-11 1-164-346-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
1uF 1uF 1uF 1uF 1uF
C368 C401 C402 C403 C404
1-164-346-11 1-163-021-91 1-126-926-11 1-128-204-11 1-128-204-11
CERAMIC CHIP CERAMIC CHIP ELECT ELECT ELECT
1uF 0.01uF 1000uF 470uF 470uF
10% 20% 20% 20%
16V 50V 10V 63V 63V
C405 C406 C407 C408 C409
1-163-239-11 1-163-239-11 1-163-239-11 1-163-239-11 1-163-239-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
33PF 33PF 33PF 33PF 33PF
5% 5% 5% 5% 5%
50V 50V 50V 50V 50V
C410 C411 C412 C413 C414
1-163-239-11 1-119-828-31 1-119-828-31 1-126-967-11 1-126-967-11
CERAMIC CHIP ELECT ELECT ELECT ELECT
33PF 100uF 100uF 47uF 47uF
5% 20% 20% 20% 20%
50V 50V 50V 25V 25V
C415 C416 C417 C418 C419
1-126-967-11 1-126-967-11 1-126-967-11 1-126-967-11 1-136-811-11
ELECT ELECT ELECT ELECT FILM
47uF 47uF 47uF 47uF 330PF
20% 20% 20% 20% 5%
25V 25V 25V 25V 100V
C420 C421 C422 C423 C424
1-117-793-11 1-117-793-11 1-106-343-00 1-136-811-11 1-117-793-11
MYLAR MYLAR MYLAR FILM MYLAR
330PF 330PF 1000PF 330PF 330PF
5% 5% 5% 5% 5%
50V 50V 200V 100V 50V
C425 C426 C427 C428 C429
1-117-793-11 1-117-793-11 1-127-713-21 1-130-483-00 1-130-484-00
MYLAR MYLAR FILM MYLAR MYLAR
330PF 330PF 10000PF 0.01uF 0.012uF
5% 5% 5% 5% 5%
50V 50V 50V 50V 50V
C430 C431 C432 C433 C434
1-136-850-11 1-127-713-21 1-113-577-11 1-113-577-11 1-130-483-00
FILM FILM ELECT ELECT MYLAR
0.1uF 10000PF 47uF 47uF 0.01uF
5% 5% 20% 20% 5%
63V 50V 16V 16V 50V
C435
1-136-850-11 FILM
20% 10V 20% 10V 20% 10V 5% 50V (S725D: Australian) 5% 50V (S725D: Australian)
C436
1-136-850-11 FILM
C437 C438
1-130-484-00 MYLAR 1-136-850-11 FILM
C439
1-136-850-11 FILM
20% 6.3V 20% 6.3V 20% 6.3V 5% 50V (S725D: Australian) 5% 50V (S725D: Australian)
C440 C441
1-130-484-00 MYLAR 1-136-850-11 FILM
C442
1-136-850-11 FILM
C443 C444
1-125-853-21 FILM 1-130-467-00 MYLAR
1-216-061-00 METAL CHIP
3.3K
5%
1/10W (S525D)
R579
1-216-069-00 METAL CHIP
6.8K
5%
R580
1-216-079-00 METAL CHIP
18K
5%
R585
1-216-109-00 METAL CHIP
330K
5%
R586
1-216-109-00 METAL CHIP
330K
5%
R587
1-216-041-00 METAL CHIP
470
5%
1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
R588
1-216-041-00 METAL CHIP
470
5%
R589
1-216-049-91 RES, CHIP
1K
5%
R590
1-216-025-91 RES, CHIP
100
5%
R591
1-216-025-91 RES, CHIP
100
5%
R592
1-216-049-91 RES, CHIP
1K
5%
R593 R598
1-216-295-91 SHORT 1-216-295-91 SHORT
0 (S525D) 0 (S525D)
1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D) 1/10W (S525D)
A-6065-261-A AU-210 BOARD, COMPLETE (S725D: Australian) A-6065-248-A AU-211 BOARD, COMPLETE (S725D: EXCEPT Australian) ********************** (Ref. No. 3,000 Series)
*
AU-210
C328 C330 C331 C361 C362
R578
*
AU-212
< CAPACITOR > C302 C303 C304 C305 C306
1-104-665-11 1-104-665-11 1-164-004-11 1-126-935-11 1-126-935-11
ELECT ELECT CERAMIC CHIP ELECT ELECT
100uF 100uF 0.1uF 470uF 470uF
20% 20% 10% 20% 20%
10V 10V 25V 6.3V 6.3V
C307 C309 C310 C311 C312
1-104-664-11 1-164-004-11 1-163-259-91 1-163-259-91 1-163-259-91
ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
47uF 0.1uF 220PF 220PF 220PF
20% 10% 5% 5% 5%
25V 25V 50V 50V 50V
C313 C314 C315 C316 C317
1-163-259-91 1-163-259-91 1-163-259-91 1-126-960-11 1-163-259-91
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP
220PF 220PF 220PF 1uF 220PF
5% 5% 5% 20% 5%
50V 50V 50V 50V 50V
C318 C319 C320 C321
1-104-665-11 1-104-665-11 1-104-665-11 1-163-259-91
ELECT ELECT ELECT CERAMIC CHIP
100uF 100uF 100uF 220PF
C322
1-163-259-91 CERAMIC CHIP
220PF
C323 C324 C325 C326
1-126-935-11 1-126-935-11 1-126-935-11 1-163-259-91
ELECT ELECT ELECT CERAMIC CHIP
470uF 470uF 470uF 220PF
C327
1-163-259-91 CERAMIC CHIP
220PF
8-13
Remark 20% 10% 20%
16V 25V 25V 16V 16V 16V 16V 16V 16V 16V
0.1uF 5% 63V (S725D: EXCEPT Australian) 0.1uF 5% 63V (S725D: EXCEPT Australian) 0.012uF 5% 50V 0.1uF 5% 63V (S725D: EXCEPT Australian) 0.1uF 5% 63V (S725D: EXCEPT Australian) 0.012uF 5% 50V 0.1uF 5% 63V (S725D: EXCEPT Australian) 0.1uF 5% 63V (S725D: EXCEPT Australian) 470PF 5% 50V 470PF 5% 50V
AU-210 Ref. No.
AU-211
Part No.
Description
C445 C446 C447 C448 C449
1-106-343-00 1-130-483-00 1-125-853-21 1-130-467-00 1-106-343-00
MYLAR MYLAR FILM MYLAR MYLAR
1000PF 0.01uF 470PF 470PF 1000PF
5% 5% 5% 5% 5%
200V 50V 50V 50V 200V
Remark
Ref. No.
C450 C451 C452 C453 C454
1-106-343-00 1-119-828-31 1-136-850-11 1-136-850-11 1-119-828-31
MYLAR ELECT FILM FILM ELECT
1000PF 100uF 0.1uF 0.1uF 100uF
5% 20% 5% 5% 20%
200V 50V 63V 63V 50V
C455 C456 C457 C458 C459
1-124-673-11 1-124-673-11 1-124-673-11 1-124-673-11 1-124-673-11
ELECT ELECT ELECT ELECT ELECT
100uF 100uF 100uF 100uF 100uF
20% 20% 20% 20% 20%
10V 10V 10V 10V 10V
C460 C461 C464 C465 C466
1-124-673-11 1-104-665-11 1-104-665-11 1-128-200-11 1-163-009-11
ELECT ELECT ELECT ELECT CERAMIC CHIP
100uF 100uF 100uF 47uF 0.001uF
20% 20% 20% 20% 10%
10V 25V 25V 63V 50V
C467 C468 C469 C470 C471
1-128-200-11 1-136-850-11 1-126-967-11 1-136-850-11 1-136-850-11
ELECT FILM ELECT FILM FILM
47uF 0.1uF 47uF 0.1uF 0.1uF
20% 5% 20% 5% 5%
63V 63V 25V 63V 63V
C472 C473 C474 C475 C478
1-136-850-11 1-164-004-11 1-136-850-11 1-136-850-11 1-104-664-11
FILM CERAMIC CHIP FILM FILM ELECT
0.1uF 5% 63V 0.1uF 10% 25V 0.1uF 5% 63V 0.1uF 5% 63V 47uF 20% 25V (S725D: EXCEPT Australian)
C479
1-163-021-91 CERAMIC CHIP
C480
1-163-021-91 CERAMIC CHIP
C485 C486 C487
1-163-233-11 CERAMIC CHIP 1-163-233-11 CERAMIC CHIP 1-163-233-11 CERAMIC CHIP
0.01uF 10% 50V (S725D: EXCEPT Australian) 0.01uF 10% 50V (S725D: EXCEPT Australian) 18PF 5% 50V 18PF 5% 50V 18PF 5% 50V
C488 C489 C490
1-163-233-11 CERAMIC CHIP 1-163-233-11 CERAMIC CHIP 1-164-004-11 CERAMIC CHIP
* CN401 CN402 CN403 CN404 CN405 CN406 * CN407
Description
D402 D403 D404 D405 D406
8-719-210-21 8-719-210-21 8-719-210-21 8-719-988-61 8-719-988-61
DIODE DIODE DIODE DIODE DIODE
11EQS04 11EQS04 11EQS04 1SS355TE-17 1SS355TE-17
D407 D408 D409 D410 D411
8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61 8-719-115-87
DIODE DIODE DIODE DIODE DIODE
1SS355TE-17 1SS355TE-17 1SS355TE-17 1SS355TE-17 RD9.1JS-T4AB2
D421 D422 D423 D424 D425
8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61
DIODE DIODE DIODE DIODE DIODE
1SS355TE-17 1SS355TE-17 1SS355TE-17 1SS355TE-17 1SS355TE-17
D426
8-719-988-61 DIODE 1SS355TE-17 (S725D: EXCEPT Australian) 8-719-988-61 DIODE 1SS355TE-17 (S725D: EXCEPT Australian)
D427
Remark
< EARTH TERMINAL > * ET401 * ET402 * ET403
18PF 5% 50V 18PF 5% 50V 0.1uF 10% 25V (S725D: EXCEPT Australian)
< CONNECTOR > CN301 CN302
Part No.
1-564-002-11 PIN, CONNECTOR 3P 1-785-697-11 CONNECTOR, FFC/FPC 18P (S725D: EXCEPT Australian) 1-564-241-11 PIN, CONNECTOR (B4P-VH) 4P 1-785-698-11 CONNECTOR, FFC/FPC 28P 1-785-695-11 CONNECTOR, FFC/FPC 13P 1-506-473-11 PIN, CONNECTOR 8P 1-785-694-11 CONNECTOR, FFC/FPC 7P 1-785-694-11 CONNECTOR, FFC/FPC 7P (S725D: EXCEPT Australian) 1-564-001-11 PIN, CONNECTOR 2P
1-537-738-21 TERMINAL, EARTH 1-537-738-21 TERMINAL, EARTH 1-537-738-21 TERMINAL, EARTH < FERRITE BEAD >
FB301 FB302 FB303 FB304 FB305
1-414-135-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH 0uH
FB306 FB307 FB308 FB309 FB310
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH 0uH (S725D: Australian)
FB311 FB312 FB313 FB314 FB315
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH 0uH
FB316 FB317 FB318 FB319 FB320
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH (S725D: Australian) 0uH 0uH
FB321 FB322 FB323 FB324 FB401
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH (S725D: EXCEPT Australian) 0uH (S725D: EXCEPT Australian) 0uH (S725D: EXCEPT Australian) 0uH
FB402
1-414-553-11 FERRITE
0uH
< IC > < DIODE > D301 D302 D303 D304 D401
8-719-071-15 8-719-071-15 8-719-071-15 8-719-071-15 8-719-210-21
DIODE DIODE DIODE DIODE DIODE
IC301 IC302 IC303 IC401 IC403
HZM6.8ZWA1TL HZM6.8ZWA1TL (S725D: Australian) HZM6.8ZWA1TL HZM6.8ZWA1TL (S725D: Australian) 11EQS04
8-14
8-759-563-79 8-759-563-79 8-749-921-12 8-759-008-67 8-759-059-79
IC IC IC IC IC
BA7660F-E2 BA7660F-E2 GP1F32T MC14066BF BA15532
AU-210 Ref. No.
Part No.
Description
IC404 IC405 IC406 IC407 IC408
8-759-059-79 8-759-634-51 8-759-634-51 8-759-971-80 8-759-710-59
IC IC IC IC IC
BA15532 M5218AP M5218AP AD712JN NJM4580D-D
Remark
IC409 IC410 IC411 IC412 IC415
8-759-710-59 8-759-710-59 8-759-711-85 8-759-711-85 8-759-604-35
IC IC IC IC IC
NJM4580D-D NJM4580D-D NJM4580E-D NJM4580E-D M5F78M05
Ref. No. Q423 Q424 Q425 Q426
Q427
< JACK > J301 J302 J303 J304 J305
J306 J307 J308 J309
1-779-382-21 1-784-675-11 1-785-489-11 1-778-064-11
JACK, PIN 1P (COAXIAL) JACK, PIN 3P (COMPONENT VIDEO OUT) JACK, PIN 6P (5.1CH OUTPUT) JACK, PIN 4P (AUDIO OUT) (S725D: Australian) 1-785-538-11 JACK, PIN (2P) (VIDEO OUT) (S725D: Australian) 1-694-484-11 TERMINAL, S (2P.V) (S VIDEO OUT) (S725D: Australian) 1-774-727-11 JACK, PIN 2P (AUDIO OUT) (S725D: EXCEPT Australian) 1-779-800-11 TERMINAL, S (S VIDEO OUT) (S725D: EXCEPT Australian) 1-779-795-11 JACK, PIN 1P (VIDEO OUT) (S725D: EXCEPT Australian) < COIL >
L301 L303 L401 L402 L403
1-412-963-11 1-412-963-11 1-412-953-11 1-412-953-11 1-412-953-11
INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR
100uH 100uH 15uH 15uH 15uH
L404 L405 L406 L407
1-412-953-11 1-412-953-11 1-412-953-11 1-412-963-11
INDUCTOR INDUCTOR INDUCTOR INDUCTOR
15uH 15uH 15uH 100uH (S725D: EXCEPT Australian)
< TRANSISTOR > Q301 Q302 Q303 Q401 Q402
8-729-421-19 8-729-424-08 8-729-120-28 8-729-424-08 8-729-424-08
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2213 UN2111 2SC1623-L5L6 UN2111 UN2111
Q403 Q404 Q405 Q410 Q411
8-729-424-08 8-729-424-08 8-729-216-22 8-729-046-97 8-729-046-97
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2111 UN2111 2SA1162 2SD1938 (F)-T (TX).SO 2SD1938 (F)-T (TX).SO
Q412 Q413 Q414 Q415 Q416
8-729-046-97 8-729-046-97 8-729-046-97 8-729-046-97 8-729-046-97
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
2SD1938 (F)-T (TX).SO 2SD1938 (F)-T (TX).SO 2SD1938 (F)-T (TX).SO 2SD1938 (F)-T (TX).SO 2SD1938 (F)-T (TX).SO
Q417 Q418 Q419 Q420 Q421
8-729-046-97 8-729-046-97 8-729-046-97 8-729-141-10 8-729-141-58
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
2SD1938 (F)-T (TX).SO 2SD1938 (F)-T (TX).SO 2SD1938 (F)-T (TX).SO 2SA985A 2SC2275A-QP
Q422
8-729-224-62 TRANSISTOR 2SK246-GR
8-15
Part No.
AU-211
Description
Remark
8-729-421-19 TRANSISTOR UN2213 8-729-421-19 TRANSISTOR UN2213 8-729-422-03 TRANSISTOR XN1B301-TX (S725D: EXCEPT Australian) 8-729-422-03 TRANSISTOR XN1B301-TX (S725D: EXCEPT Australian)
Q431 Q432 Q433 Q434
8-729-422-03 TRANSISTOR XN1B301-TX (S725D: EXCEPT Australian) 8-729-424-08 TRANSISTOR UN2111 8-729-424-08 TRANSISTOR UN2111 8-729-424-08 TRANSISTOR UN2111 8-729-424-08 TRANSISTOR UN2111
Q435 Q437 Q438 Q439
8-729-421-19 8-729-424-08 8-729-421-19 8-729-424-08
Q440
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2213 UN2111 UN2213 UN2111 (S725D: EXCEPT Australian) 8-729-421-19 TRANSISTOR UN2213 (S725D: EXCEPT Australian) < RESISTOR >
R301 R302 R303 R304 R305
1-216-057-00 1-216-073-00 1-216-073-00 1-216-063-91 1-216-055-00
METAL CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP
2.2K 10K 10K 3.9K 1.8K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R306 R307 R308
1-216-021-00 METAL CHIP 1-216-021-00 METAL CHIP 1-216-021-00 METAL CHIP
68 68 68
R308
1-216-295-91 SHORT
R309
1-216-021-00 METAL CHIP
0 (S725D: EXCEPT Australian) 68 5% 1/10W
R310 R311 R312 R313 R314
1-216-021-00 1-216-021-00 1-216-033-00 1-216-021-00 1-216-025-91
METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP
68 68 220 68 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R315 R316 R317 R320 R348
1-216-021-00 1-216-021-00 1-216-021-00 1-216-073-00 1-216-097-91
METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP
68 68 68 10K 100K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R350
1-216-295-91 SHORT
R400
1-216-065-91 RES, CHIP
R401 R402
1-216-037-00 METAL CHIP 1-216-042-00 METAL CHIP
R402
1-216-047-91 RES, CHIP
R403 R404
1-216-042-00 METAL CHIP 1-216-042-00 METAL CHIP
R404
1-216-047-91 RES, CHIP
R405 R406
1-216-042-00 METAL CHIP 1-216-042-00 METAL CHIP
R406
1-216-047-91 RES, CHIP
R407
1-216-042-00 METAL CHIP
5% 1/10W 5% 1/10W 5% 1/10W (S725D: Australian)
0 (S725D: EXCEPT Australian) 4.7K 5% 1/10W (S725D: EXCEPT Australian) 330 5% 1/10W 510 5% 1/10W (S725D: Australian) 820 5% 1/10W (S725D: EXCEPT Australian) 510 510
5% 1/10W 5% 1/10W (S725D: Australian) 820 5% 1/10W (S725D: EXCEPT Australian) 510 5% 1/10W 510 5% 1/10W (S725D: Australian) 820 5% 1/10W (S725D: EXCEPT Australian) 510 5% 1/10W
AU-210 Ref. No.
AU-211
Part No.
Description
Remark 5% 5% 5%
Ref. No.
R408 R409 R410
1-216-073-00 METAL CHIP 1-216-097-91 RES, CHIP 1-216-097-91 RES, CHIP
10K 100K 100K
1/10W 1/10W 1/10W
R411 R412 R413 R414 R415
1-216-097-91 1-216-097-91 1-216-073-00 1-216-097-91 1-216-061-00
100K 5% 1/10W 100K 5% 1/10W 10K 5% 1/10W 100K 5% 1/10W 3.3K 5% 1/10W (S725D: EXCEPT Australian)
R415 R416
1-216-295-91 SHORT 1-216-065-91 RES, CHIP
R417
1-216-061-00 METAL CHIP
R418
1-216-065-91 RES, CHIP
R419
1-216-061-00 METAL CHIP
R420 R423 R425 R426 R428
1-216-063-91 1-216-109-00 1-216-109-00 1-216-109-00 1-216-109-00
RES, CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
3.9K 330K 330K 330K 330K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R429 R430 R431 R432 R433
1-216-109-00 1-216-066-00 1-216-109-00 1-216-109-00 1-216-066-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
330K 5.1K 330K 330K 5.1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R434 R435
1-216-109-00 METAL CHIP 1-216-049-91 RES, CHIP
R437 R438 R439
Part No.
Description
Remark
R467 R468 R469
1-216-055-00 METAL CHIP 1-216-045-00 METAL CHIP 1-216-061-00 METAL CHIP
1.8K 680 3.3K
5% 5% 5%
1/10W 1/10W 1/10W
R470 R471 R472 R473 R474
1-216-075-00 1-216-109-00 1-216-109-00 1-216-109-00 1-216-109-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
12K 330K 330K 330K 330K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R475 R476 R477 R478 R479
1-216-109-00 1-216-109-00 1-216-109-00 1-216-109-00 1-259-412-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP CARBON
330K 330K 330K 330K 220
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/6W
R480 R481 R482 R483 R484
1-216-041-00 1-216-041-00 1-216-041-00 1-216-085-00 1-216-085-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
470 470 470 33K 33K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R485 R486 R487 R488 R489
1-259-412-11 1-216-041-00 1-216-041-00 1-216-041-00 1-216-049-91
CARBON METAL CHIP METAL CHIP METAL CHIP RES, CHIP
220 470 470 470 1K
5% 5% 5% 5% 5%
1/6W 1/10W 1/10W 1/10W 1/10W
R490 R491 R492 R493 R494
1-216-049-91 1-216-049-91 1-216-025-91 1-216-025-91 1-216-049-91
RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
1K 1K 100 100 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
1-216-066-00 METAL CHIP 1-216-067-00 METAL CHIP 1-259-452-11 CARBON
330K 5% 1/10W 1K 5% 1/10W (S725D: EXCEPT Australian) 5.1K 5% 1/10W 5.6K 5% 1/10W 10K 5% 1/6W
R495 R496 R497 R498 R499
1-216-049-91 1-216-025-91 1-216-025-91 1-216-049-91 1-216-049-91
RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
1K 100 100 1K 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R440 R441 R442 R443 R444
1-216-073-00 1-216-073-00 1-216-075-00 1-259-452-11 1-216-073-00
METAL CHIP METAL CHIP METAL CHIP CARBON METAL CHIP
10K 10K 12K 10K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/6W 1/10W
R500 R501 R502 R504 R505
1-216-025-91 1-216-025-91 1-216-049-91 1-216-085-00 1-216-085-00
RES, CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
100 100 1K 33K 33K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R445 R446 R447 R448 R449
1-216-073-00 1-216-073-00 1-259-426-11 1-216-047-91 1-216-047-91
METAL CHIP METAL CHIP CARBON RES, CHIP RES, CHIP
10K 10K 820 820 820
5% 5% 5% 5% 5%
1/10W 1/10W 1/6W 1/10W 1/10W
R506 R507 R508 R509 R510
1-259-420-11 1-259-420-11 1-259-420-11 1-259-420-11 1-216-085-00
CARBON CARBON CARBON CARBON METAL CHIP
470 470 470 470 33K
5% 5% 5% 5% 5%
1/6W 1/6W 1/6W 1/6W 1/10W
R450 R451 R452 R453 R454
1-216-063-91 1-259-426-11 1-216-047-91 1-216-047-91 1-216-047-91
RES, CHIP CARBON RES, CHIP RES, CHIP RES, CHIP
3.9K 820 820 820 820
5% 5% 5% 5% 5%
1/10W 1/6W 1/10W 1/10W 1/10W
R511 R512 R513 R514 R515
1-216-077-00 1-216-077-00 1-216-085-00 1-216-025-91 1-216-025-91
METAL CHIP METAL CHIP METAL CHIP RES, CHIP RES, CHIP
15K 15K 33K 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R455 R456 R457 R458 R459
1-259-434-11 1-259-424-11 1-259-424-11 1-259-434-11 1-216-055-00
CARBON CARBON CARBON CARBON METAL CHIP
1.8K 680 680 1.8K 1.8K
5% 5% 5% 5% 5%
1/6W 1/6W 1/6W 1/6W 1/10W
R516 R517 R519 R520 R521
1-216-049-91 1-216-049-91 1-259-440-11 1-259-404-11 1-259-440-11
RES, CHIP RES, CHIP CARBON CARBON CARBON
1K 1K 3.3K 100 3.3K
5% 5% 5% 5% 5%
1/10W 1/10W 1/6W 1/6W 1/6W
R460 R461 R462 R463 R464
1-216-045-00 1-216-045-00 1-216-055-00 1-216-055-00 1-216-045-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
680 680 1.8K 1.8K 680
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R523 R524 R525 R526 R531
1-259-404-11 1-259-466-11 1-259-404-11 1-216-081-00 1-216-097-91
CARBON CARBON CARBON METAL CHIP RES, CHIP
100 39K 100 22K 100K
5% 5% 5% 5% 5%
1/6W 1/6W 1/6W 1/10W 1/10W
R465 R466
1-216-045-00 METAL CHIP 1-216-055-00 METAL CHIP
680 1.8K
5% 5%
1/10W 1/10W
R532 R533
1-216-097-91 RES, CHIP 1-216-097-91 RES, CHIP
100K 100K
5% 5%
1/10W 1/10W
RES, CHIP RES, CHIP METAL CHIP RES, CHIP METAL CHIP
0 (S725D: Australian) 4.7K 5% 1/10W (S725D: EXCEPT Australian) 3.3K 5% 1/10W (S725D: EXCEPT Australian) 4.7K 5% 1/10W (S725D: EXCEPT Australian) 3.3K 5% 1/10W (S725D: EXCEPT Australian)
8-16
AU-210 Ref. No.
Part No.
Description
Remark
R534 R536 R538
1-216-097-91 RES, CHIP 1-216-295-91 SHORT 1-216-295-91 SHORT
100K 0 0
5%
R539 R540 R542 R543 R544
1-216-295-91 1-216-295-91 1-259-445-11 1-259-445-11 1-216-063-91
SHORT SHORT CARBON CARBON RES, CHIP
0 0 5.1K 5.1K 3.9K
5% 5% 5%
1/6W 1/6W 1/10W
R545 R546 R547 R548 R549
1-216-059-00 1-216-085-00 1-216-059-00 1-259-445-11 1-259-445-11
METAL CHIP METAL CHIP METAL CHIP CARBON CARBON
2.7K 33K 2.7K 5.1K 5.1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/6W 1/6W
R550 R552 R553 R556 R557 R557
1-216-081-00 1-216-066-00 1-216-066-00 1-216-066-00 1-216-066-00 1-216-066-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
22K 5.1K 5.1K 5.1K 5.1K 5.1K
5% 5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W 1/10W
Ref. No.
1/10W
*
1-104-664-11 1-163-021-91 1-104-664-11 1-163-021-91 1-104-664-11
ELECT CERAMIC CHIP ELECT CERAMIC CHIP ELECT
47uF 0.01uF 47uF 0.01uF 47uF
20% 10% 20% 10% 20%
16V 50V 16V 50V 16V
C906 C907 C908 C909 C910
1-163-021-91 1-104-664-11 1-128-551-11 1-128-551-11 1-128-551-11
CERAMIC CHIP ELECT ELECT ELECT ELECT
0.01uF 47uF 22uF 22uF 22uF
10% 20% 20% 20% 20%
50V 16V 25V 25V 25V
C911 C912 C913 C914 C915
1-163-021-91 1-128-551-11 1-163-021-91 1-126-935-11 1-128-551-11
CERAMIC CHIP ELECT CERAMIC CHIP ELECT ELECT
0.01uF 22uF 0.01uF 470uF 22uF
10% 20% 10% 20% 20%
50V 25V 50V 6.3V 25V
C916 C917 C918 C919 C920
1-126-935-11 1-128-551-11 1-126-935-11 1-128-551-11 1-163-021-91
ELECT ELECT ELECT ELECT CERAMIC CHIP
470uF 22uF 470uF 22uF 0.01uF
20% 20% 20% 20% 10%
6.3V 25V 6.3V 25V 50V
C921 C922 C923 C924 C926
1-128-551-11 1-128-551-11 1-163-021-91 1-126-935-11 1-104-664-11
ELECT ELECT CERAMIC CHIP ELECT ELECT
22uF 22uF 0.01uF 470uF 47uF
20% 20% 10% 20% 20%
25V 25V 50V 6.3V 16V
C927 C938 C939 C940 C941
1-163-021-91 1-163-133-00 1-163-133-00 1-163-133-00 1-163-133-00
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 470PF 470PF 470PF 470PF
10% 5% 5% 5% 5%
50V 50V 50V 50V 50V
C942 C943 C944 C945
1-163-133-00 1-163-133-00 1-163-133-00 1-163-133-00
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
470PF 470PF 470PF 470PF
5% 5% 5% 5%
50V 50V 50V 50V
Description
ER-5 Remark
C950
1-163-251-11 CERAMIC CHIP
100PF
5%
50V
C951 C962 C963 C972 C973
1-163-251-11 1-163-251-11 1-163-251-11 1-163-021-91 1-163-239-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
100PF 100PF 100PF 0.01uF 33PF
5% 5% 5% 10% 5%
50V 50V 50V 50V 50V
C974 C975 C976 C977 C978
1-163-239-11 1-163-239-11 1-163-233-11 1-163-233-11 1-163-233-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
33PF 33PF 18PF 18PF 18PF
5% 5% 5% 5% 5%
50V 50V 50V 50V 50V
CN901 CN902 CN903 CN904
1-785-729-21 1-785-732-21 1-251-780-11 1-251-780-11
CONNECTOR, FFC/FPC 7P CONNECTOR, FFC/FPC 18P SOCKET, PIN (21P) SOCKET, PIN (21P) < DIODE >
< CAPACITOR > C901 C902 C903 C904 C905
ER-4
< CONNECTOR >
A-6065-226-A ER-4 BOARD, COMPLETE (S325/S525D: EXCEPT Australian) A-6065-249-A ER-5 BOARD, COMPLETE (S725D: EXCEPT Australian) ******************** (Ref. No. 2,000 Series)
*
Part No.
AU-211
D901 D902 D903 D904 D905
8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61 8-719-988-61
D906 D907
D915
8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 (S725D: EXCEPT Australian) 8-719-071-15 DIODE HZM6.8ZWA1TL 8-719-988-61 DIODE 1SS355TE-17 (S725D: EXCEPT Australian) 8-719-071-15 DIODE HZM6.8ZWA1TL
D917 D918 D919 D920 D921
8-719-071-15 8-719-071-15 8-719-071-15 8-719-071-15 8-719-071-15
DIODE DIODE DIODE DIODE DIODE
HZM6.8ZWA1TL HZM6.8ZWA1TL HZM6.8ZWA1TL HZM6.8ZWA1TL HZM6.8ZWA1TL
D922 D923 D924 D926 D927
8-719-071-15 8-719-071-15 8-719-071-15 8-719-056-82 8-719-977-40
DIODE DIODE DIODE DIODE DIODE
HZM6.8ZWA1TL HZM6.8ZWA1TL HZM6.8ZWA1TL UDZ-TE-17-6.2B UDZ-TE-17-13B
D929 D930
8-719-056-82 DIODE UDZ-TE-17-6.2B 8-719-977-40 DIODE UDZ-TE-17-13B
D908 D910
DIODE DIODE DIODE DIODE DIODE
1SS355TE-17 1SS355TE-17 1SS355TE-17 1SS355TE-17 1SS355TE-17
< EARTH TERMINAL > * ET901
1-537-738-21 TERMINAL, EARTH < FERRITE BEAD >
8-17
FB901 FB902 FB903 FB904 FB905
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH 0uH
FB906 FB907 FB908 FB909 FB910
1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11 1-414-553-11
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH 0uH
FB911 FB912
1-414-553-11 FERRITE 1-414-553-11 FERRITE
0uH 0uH
ER-4 Ref. No.
ER-5 Part No.
Description
Remark
FB913 FB914 FB915
1-414-553-11 FERRITE 1-414-553-11 FERRITE 1-414-553-11 FERRITE
0uH 0uH 0uH
FB916 FB917 FB918
1-414-553-11 FERRITE 1-414-553-11 FERRITE 1-414-553-11 FERRITE
0uH 0uH 0uH
Ref. No.
Part No.
Description
JR925
1-216-296-91 SHORT
JR926
1-216-296-91 SHORT
JR927
1-216-295-91 SHORT
JR928
1-216-296-91 SHORT
JR929
1-216-296-91 SHORT
JR930
1-216-296-91 SHORT
JR932
1-216-296-91 SHORT
JR933
1-216-296-91 SHORT
JR934
1-216-296-91 SHORT
JR935
1-216-296-91 SHORT
JR936
1-216-295-91 SHORT
JR937
1-216-295-91 SHORT
< IC > IC901 IC901 IC902 IC903
8-759-563-79 IC BA7660F-E2 (S325/S525D: EXCEPT Australian) 8-759-522-11 IC BA7660FS-E2 (S725D: EXCEPT Australian) 8-759-432-78 IC MM1111XFBE 8-759-567-33 IC MM1225XFBE < JUMPER RESISTOR >
JR900
1-216-296-91 SHORT
JR901
1-216-296-91 SHORT
JR902
1-216-295-91 SHORT
JR903
1-216-296-91 SHORT
JR904
1-216-296-91 SHORT
JR905
1-216-295-91 SHORT
JR906
1-216-295-91 SHORT
JR907
1-216-296-91 SHORT
JR908
1-216-296-91 SHORT
JR909
1-216-296-91 SHORT
JR910
1-216-295-91 SHORT
JR911
1-216-296-91 SHORT
JR912
1-216-296-91 SHORT
JR913
1-216-295-91 SHORT
JR914
1-216-296-91 SHORT
JR915
1-216-296-91 SHORT
JR916
1-216-296-91 SHORT
JR917
1-216-295-91 SHORT
JR918
1-216-296-91 SHORT
JR919
1-216-296-91 SHORT
JR920
1-216-296-91 SHORT
JR921
1-216-295-91 SHORT
JR922
1-216-295-91 SHORT
JR923
1-216-296-91 SHORT
JR924
1-216-295-91 SHORT
0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian)
Remark 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian)
< COIL > 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian)
L901 L902 L903 L904 L905
1-412-064-11 1-412-064-11 1-412-058-11 1-412-064-11 1-412-953-11
INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR
L906 L907
1-412-953-11 INDUCTOR 1-412-953-11 INDUCTOR
100uH 100uH 10uH 100uH 15uH 15uH 15uH
< TRANSISTOR > 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian)
Q901 Q902 Q903 Q904 Q905
8-729-421-19 8-729-422-27 8-729-424-08 8-729-421-19 8-729-422-27
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2213 2SD601A-Q UN2111 UN2213 2SD601A-Q
Q906 Q907 Q908 Q909 Q910
8-729-421-19 8-729-424-08 8-729-421-22 8-729-421-19 8-729-424-08
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
UN2213 UN2111 UN2211 UN2213 UN2111
Q912 Q913 Q914 Q915 Q916
8-729-422-27 8-729-422-27 8-729-422-27 8-729-422-27 8-729-422-27
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
2SD601A-Q 2SD601A-Q 2SD601A-Q 2SD601A-Q 2SD601A-Q
Q917
8-729-421-19 TRANSISTOR UN2213 (S725D: EXCEPT Australian) 8-729-421-19 TRANSISTOR UN2213 (S725D: EXCEPT Australian)
Q918 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian) 0 (S325/S525D: EXCEPT Australian)
8-18
< RESISTOR > R901 R902 R903 R904 R905
1-216-113-00 1-216-095-00 1-216-113-00 1-216-095-00 1-216-113-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
470K 82K 470K 82K 470K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
ER-4 Ref. No.
ER-5
FL-98
FL-99
FL-100
FL-101
Part No.
Description
Remark
Ref. No.
Part No.
R906 R907 R908 R909 R910
1-216-095-00 1-216-089-91 1-216-105-91 1-216-039-00 1-216-039-00
METAL CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
82K 47K 220K 390 390
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
*
R911 R912 R913 R914 R915
1-216-039-00 1-216-039-00 1-216-057-00 1-216-057-00 1-216-045-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
390 390 2.2K 2.2K 680
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
*
A-6065-227-A FL-98 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-267-A FL-98 BOARD, COMPLETE (S325) A-6065-240-A FL-99 BOARD, COMPLETE (S725D: Australian) A-6065-250-A FL-100 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-223-A FL-101 BOARD, COMPLETE (S525D: Australian) ********************** (Ref. No. 2,000 Series)
R916 R917 R918 R920 R922
1-216-057-00 1-216-057-00 1-216-021-00 1-216-049-91 1-216-021-00
METAL CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP
2.2K 2.2K 68 1K 68
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R923 R924 R925 R926 R927
1-216-049-91 1-216-049-91 1-216-049-91 1-216-049-91 1-216-020-00
RES, CHIP RES, CHIP RES, CHIP RES, CHIP METAL CHIP
1K 1K 1K 1K 62
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R928 R929 R930 R931 R932
1-216-021-00 1-216-021-00 1-216-065-91 1-216-065-91 1-216-065-91
METAL CHIP METAL CHIP RES, CHIP RES, CHIP RES, CHIP
68 68 4.7K 4.7K 4.7K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R933 R934 R938 R939 R940
1-216-065-91 1-216-065-91 1-216-025-91 1-216-017-91 1-216-042-00
RES, CHIP RES, CHIP RES, CHIP RES, CHIP METAL CHIP
R940
1-216-047-91 RES, CHIP
R941
1-216-042-00
R941
1-216-047-91
R942
1-216-042-00
R942
1-216-047-91
R943 R944 R945
1-216-073-00 METAL CHIP 1-216-073-00 METAL CHIP 1-216-081-00 METAL CHIP
R946
1-216-065-91 RES, CHIP
R948
1-216-022-00 METAL CHIP
* * *
Description
Remark
3-053-487-01 HOLDER, FL TUBE < CAPACITOR >
4.7K 5% 1/10W 4.7K 5% 1/10W 100 5% 1/10W 47 5% 1/10W 510 5% 1/10W (S325/S525D: EXCEPT Australian)
820 5% 1/10W (S725D: EXCEPT Australian) METAL CHIP 510 5% 1/10W (S325/S525D: EXCEPT Australian) RES, CHIP 820 5% 1/10W (S725D: EXCEPT Australian) METAL CHIP 510 5% 1/10W (S325/S525D: EXCEPT Australian) RES, CHIP 820 5% 1/10W (S725D: EXCEPT Australian) 10K 5% 1/10W 10K 5% 1/10W 22K 5% 1/10W (S725D: EXCEPT Australian) 4.7K 5% 1/10W (S725D: EXCEPT Australian) 75 5% 1/10W
C201 C203 C205 C209
1-124-259-11 1-164-004-11 1-164-004-11 1-163-021-91
ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
4.7uF 0.1uF 0.1uF 0.01uF
20% 10% 10% 10%
C210
1-163-021-91 CERAMIC CHIP
0.01uF
10%
C211 C212
1-164-004-11 CERAMIC CHIP 1-163-021-91 CERAMIC CHIP
0.1uF 0.01uF
C213
1-163-021-91 CERAMIC CHIP
0.01uF
C214
1-163-021-91 CERAMIC CHIP
0.01uF
C215
1-163-021-91 CERAMIC CHIP
0.01uF
10% 25V 10% 50V (S525D/S725D) 10% 50V (S525D/S725D) 10% 50V (S525D/S725D) 10% 50V
C216 C219 C220 C221 C222
1-163-021-91 1-115-339-11 1-115-339-11 1-164-004-11 1-164-004-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.1uF 0.1uF 0.1uF 0.1uF
10% 10% 10% 10% 10%
50V 50V 50V 25V 25V
C223 C235 C236 C237 C238
1-128-131-11 1-163-259-91 1-163-259-91 1-163-259-91 1-163-259-91
ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
22uF 220PF 220PF 220PF 220PF
20% 5% 5% 5% 5%
50V 50V 50V 50V 50V
C239 C240 C241 C242 C243
1-163-259-91 1-163-259-91 1-163-259-91 1-163-259-91 1-163-259-91
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
220PF 220PF 220PF 220PF 220PF
5% 5% 5% 5% 5%
50V 50V 50V 50V 50V
< CONNECTOR > CN201 CN202 CN203
< RELAY > RY901 RY902 RY903 RY904 RY905
1-755-041-11 1-755-041-11 1-755-041-11 1-755-041-11 1-755-041-11
16V 25V 25V 50V (S725D) 50V (S725D)
1-568-666-21 CONNECTOR, BOARD TO BOARD 12P 1-785-731-21 CONNECTOR, FFC/FPC 17P 1-785-730-21 CONNECTOR, FFC/FPC 9P < DIODE >
RELAY RELAY RELAY RELAY RELAY
D202 D203 D204 D206 D207
8-719-988-61 DIODE 1SS355TE-17 8-719-069-45 DIODE SELU5E23C-TP15 (MULTI CHANNEL) (S525D/S725D) 8-719-056-06 DIODE SLR-342DCT31 (JOG) (S525D/S725D) 8-719-018-12 DIODE MA8330-L-TX 8-719-422-67 DIODE MA8062-H-TX < EARTH TERMINAL >
* ET201
1-537-738-21 TERMINAL, EARTH (S725D) < FERRITE BEAD >
FB201
8-19
1-414-135-11 FERRITE
0uH
FL-98 Ref. No.
FL-99
Part No.
FL-100
FL-101
Description
Remark
Ref. No.
< IC > IC201 IC202
8-759-574-86 IC M38B57MCH-E206FP 8-759-326-78 IC PST9140NL < JUMPER RESISTOR >
Part No.
Description
Remark
R214 R215 R216
1-216-059-00 METAL CHIP 1-216-061-00 METAL CHIP 1-216-065-91 RES, CHIP
2.7K 3.3K 4.7K
5% 5% 5%
1/10W 1/10W 1/10W
R217 R218 R221 R222
1-216-071-00 1-216-077-00 1-208-806-11 1-216-053-00
METAL CHIP METAL CHIP RES, CHIP METAL CHIP
8.2K 15K 10K 1.5K
R223
1-216-055-00 METAL CHIP
1.8K
5% 1/10W 5% 1/10W 0.50% 1/10W 5% 1/10W (S525D/S725D) 5% 1/10W (S525D/S725D)
R224
1-216-059-00 METAL CHIP
2.7K
JR201 JR202 JR203 JR204 JR205
1-216-295-91 1-216-295-91 1-216-295-91 1-216-295-91 1-216-296-91
SHORT SHORT SHORT SHORT SHORT
0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D)
JR206 JR207 JR208 JR209 JR210
1-216-295-91 1-216-296-91 1-216-295-91 1-216-296-91 1-216-296-91
SHORT SHORT SHORT SHORT SHORT
0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D)
R225
1-216-061-00 METAL CHIP
3.3K
R226
1-216-025-91 RES, CHIP
100
R227
1-216-025-91 RES, CHIP
100
JR211 JR212 JR214 JR216 JR217
1-216-295-91 1-216-296-91 1-216-296-91 1-216-296-91 1-216-296-91
SHORT SHORT SHORT SHORT SHORT
0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D)
R229
1-216-063-91 RES, CHIP
3.9K
5% 1/10W (S525D/S725D) 5% 1/10W (S525D/S725D) 5% 1/10W (S525D/S725D) 5% 1/10W (S525D/S725D) 5% 1/10W
JR218 JR219 JR220 JR224 JR226
1-216-295-91 1-216-295-91 1-216-295-91 1-216-296-91 1-216-295-91
SHORT SHORT SHORT SHORT SHORT
0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D)
R230 R231 R232 R241 R243
1-216-073-00 1-216-025-91 1-216-025-91 1-216-073-00 1-216-073-00
METAL CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
10K 100 100 10K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
JR229 JR230 JR231 JR233 JR234
1-216-296-91 1-216-296-91 1-216-295-91 1-216-296-91 1-216-295-91
SHORT SHORT SHORT SHORT SHORT
0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D)
R244 R247 R248 R249 R250
1-216-073-00 1-216-073-00 1-216-073-00 1-216-073-00 1-216-073-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 10K 10K 10K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
JR235 JR236 JR237 JR238 JR244
1-216-295-91 1-216-295-91 1-216-295-91 1-216-296-91 1-216-295-91
SHORT SHORT SHORT SHORT SHORT
0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D) 0 (S325/S525D)
R251 R252 R253 R254 R255
1-216-049-91 1-216-049-91 1-216-073-00 1-216-073-00 1-216-073-00
RES, CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP
1K 1K 10K 10K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
JR249
1-216-296-91 SHORT
0 (S325/S525D)
R256 R257 R258 R259 R260
1-216-073-00 1-216-025-91 1-216-025-91 1-216-025-91 1-216-025-91
METAL CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
10K 100 100 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R261 R262 R263
1-216-025-91 RES, CHIP 1-216-025-91 RES, CHIP 1-216-073-00 METAL CHIP
100 100 10K
R264 R266
1-216-073-00 METAL CHIP 1-216-057-00 METAL CHIP
10K 2.2K
5% 1/10W 5% 1/10W 5% 1/10W (S525D/S725D) 5% 1/10W 5% 1/10W (S725D)
R266
1-216-073-00 METAL CHIP
10K
5%
R267 R268 R270 R271
1-216-049-91 1-216-089-91 1-216-073-00 1-216-073-00
RES, CHIP RES, CHIP METAL CHIP METAL CHIP
1K 47K 10K 10K
5% 5% 5% 5%
1/10W (S325) 1/10W 1/10W 1/10W 1/10W
R272 R273 R274 R275 R276
1-216-065-91 1-216-025-91 1-216-097-91 1-216-073-00 1-216-073-00
RES, CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
4.7K 100 100K 10K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R277 R278 R279 R280
1-216-073-00 1-216-073-00 1-216-073-00 1-216-073-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 10K 10K 10K
5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W (S325)
< FLUORESCENT INDICATOR > ND201
1-517-836-11 INDICATOR TUBE, FLUORESCENT < TRANSISTOR >
Q201
8-729-804-41 TRANSISTOR 2SB1122-S < RESISTOR >
R201 R202 R203 R204 R205
1-208-806-11 1-216-053-00 1-216-055-00 1-216-059-00 1-216-061-00
RES, CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 1.5K 1.8K 2.7K 3.3K
0.50% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R206 R207 R208
1-216-065-91 RES, CHIP 1-216-071-00 METAL CHIP 1-216-077-00 METAL CHIP
4.7K 8.2K 15K
R209
1-216-091-00 METAL CHIP
56K
R211
1-208-806-11 RES, CHIP
10K
5% 1/10W 5% 1/10W 5% 1/10W (S525D/S725D) 5% 1/10W (S725D) 0.50% 1/10W
R212 R213
1-216-053-00 METAL CHIP 1-216-055-00 METAL CHIP
1.5K 1.8K
5% 5%
1/10W 1/10W
8-20
FL-98
Ref. No.
Part No.
FL-99
FL-100
Description
FL-101
Remark
FR-147
FR-148
FR-149
FR-150
HP-108
HP-109
HP-110
HP-111
Ref. No.
R284
1-216-073-00 METAL CHIP
10K
5%
R285
1-216-045-00 METAL CHIP
680
R286 R287
1-216-073-00 METAL CHIP 1-216-037-00 METAL CHIP
10K 330
R288 R289
1-216-073-00 METAL CHIP 1-216-073-00 METAL CHIP
10K 10K
5% 1/10W (S525D/S725D) 5% 1/10W 5% 1/10W (S525D/S725D) 5% 1/10W 5% 1/10W
R298
1-216-025-91 RES, CHIP
100
5%
R299
1-216-025-91 RES, CHIP
100
5%
Part No.
1/10W
1-771-349-21 1-771-349-21 1-771-349-21 1-771-349-21 1-771-349-21
S214 S215 S216 S217
1-771-349-21 1-771-349-21 1-771-349-21 1-771-349-21
S217
Remark
< CONNECTOR > CN001 CN002 CN003
1-506-485-11 PIN, CONNECTOR 6P 1-568-672-11 CONNECTOR, BOARD TO BOARD 12P 1-785-712-11 CONNECTOR, BOARD TO BOARD 4P (S525D/S725D) < DIODE >
D001 D002 D003 D004 D071
1/10W (S725D) 1/10W (S725D)
8-719-041-97 8-719-041-97 8-719-041-97 8-719-041-97 8-719-064-11
< SWITCH > S201 S202 S208 S212 S213
Description
DIODE DIODE DIODE DIODE DIODE
MA113-(TX) MA113-(TX) MA113-(TX) MA113-(TX) SPR-325MVW (ON/STANDBY)
< FERRITE BEAD >
SWITCH, KEYBOARD (p) SWITCH, KEYBOARD (P) SWITCH, KEYBOARD (JOG) (S525D/S725D) SWITCH, KEYBOARD (OPEN/CLOSE §) SWITCH, KEYBOARD (()
FB001 FB002 FB004
1-414-135-11 FERRITE 1-414-135-11 FERRITE 1-469-324-21 FERRITE
0uH 0uH 0uH
< IC >
SWITCH, KEYBOARD (TITLE) SWITCH, KEYBOARD (DVD MENU) SWITCH, KEYBOARD (RETURN) SWITCH, KEYBOARD (PREV =) (S325/S525D) 1-771-349-21 SWITCH, KEYBOARD (0 SEARCH) (S725D)
IC051
8-749-011-22 IC GP1U27X < COIL >
L001
1-408-978-21 INDUCTOR
47uH
< TRANSISTOR > S218 S218 S221 S222 S223
S224 S230
1-771-349-21 SWITCH, KEYBOARD (+ NEXT) (S325/S525D) 1-771-349-21 SWITCH, KEYBOARD (SEARCH )) (S725D) 1-771-349-21 SWITCH, KEYBOARD (REREAT) (S525D/S725D) 1-771-349-21 SWITCH, KEYBOARD (CLEAR) (S525D/S725D) 1-771-349-21 SWITCH, KEYBOARD (PROGRAM) (S525D/S725D)
Q001 Q002
8-729-808-41 TRANSISTOR 2SD1624-S 8-729-808-41 TRANSISTOR 2SD1624-S < RESISTOR >
R002 R003 R071 R072
1-771-349-21 SWITCH, KEYBOARD (SHUFFLE) (S525D/S725D) 1-475-235-21 ENCODER, ROTARY (PREV = + NEXT) (S725D)
1-216-073-00 1-216-073-00 1-216-047-91 1-216-037-00
METAL CHIP METAL CHIP RES, CHIP METAL CHIP
10K 10K 820 330
5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W
< SWITCH > S071
1-771-349-21 SWITCH, KEYBOARD (I/u )
< VIBRATOR > < TRANSFORMER > X201
1-577-358-21 VIBRATOR, CERAMIC (4MHz) T001 A-6065-228-A FR-147 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-268-A FR-147 BOARD, COMPLETE (S325) A-6065-241-A FR-148 BOARD, COMPLETE (S725D: Australian) A-6065-251-A FR-149 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-218-A FR-150 BOARD, COMPLETE (S525D: Australian) ********************** (Ref. No. 4,000 Series)
* * * * *
A-6065-229-A HP-108 BOARD, COMPLETE (S525D: EXCEPT Australian) A-6065-257-A HP-109 BOARD, COMPLETE (S725D: Australian) A-6065-252-A HP-110 BOARD, COMPLETE (S725D: EXCEPT Australian) A-6065-234-A HP-111 BOARD, COMPLETE (S525D: Australian) ********************** (Ref. No. 2,000 Series)
* * * *
< CAPACITOR > C001 C002 C003 C004 C005
1-124-234-00 1-137-150-11 1-115-339-11 1-115-339-11 1-128-131-11
ELECT FILM CERAMIC CHIP CERAMIC CHIP ELECT
C051
1-164-004-11 CERAMIC CHIP
1-433-748-11 TRANSFORMER, DC-DC CONVERTER
< CAPACITOR > 22uF 0.01uF 0.1uF 0.1uF 22uF
20% 5% 10% 10% 20%
16V 100V 50V 50V 50V
C701
1-163-011-11 CERAMIC CHIP
0.0015uF 10%
C701
1-164-161-11 CERAMIC CHIP
0.0022uF 10%
C702
1-163-011-11 CERAMIC CHIP
0.0015uF 10%
0.1uF
10%
25V
C702
1-164-161-11 CERAMIC CHIP
0.0022uF 10%
8-21
50V (S725D) 100V (S525D) 50V (S725D) 100V (S525D)
HP-108 Ref. No.
HP-109
Part No.
HP-110
HP-111
Description
MB-82
Remark
Ref. No.
< CONNECTOR > * CN701
10%
25V
C206 C209 C210 C211 C212
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 25V 25V
C213 C304 C307 C309 C310
1-162-970-11 1-110-563-11 1-125-822-11 1-107-826-91 1-162-970-11
CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.068uF 10uF 0.1uF 0.01uF
10% 10% 20% 10% 10%
25V 16V 10V 16V 25V
C312 C313 C314 C315 C316
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 25V 25V
C317 C318 C319 C320 C321
1-162-970-11 1-162-970-11 1-125-822-11 1-162-970-11 1-126-206-11
CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP ELECT CHIP
0.01uF 0.01uF 10uF 0.01uF 100uF
10% 10% 20% 10% 20%
25V 25V 10V 25V 6.3V
(S525D: Australian)
C322 C323 C324 C325 C327
1-162-970-11 1-162-970-11 1-162-970-11 1-107-826-91 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.1uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 16V 25V
(S725D: Australian) A-6065-231-A MB-85 BOARD, COMPLETE (S525D: EXCEPT Russian, Australian) A-6065-232-A MB-85 BOARD, COMPLETE (S525D: Russian) A-6065-246-A MB-85 BOARD, COMPLETE (S725D: Russian)
C328 C329 C331 C333 C334
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 25V 25V
A-6065-254-A MB-85 BOARD, COMPLETE (S725D: EXCEPT E, Russian, Australian) A-6065-269-A MB-85 BOARD, COMPLETE (S325: EXCEPT Russian) A-6065-270-A MB-85 BOARD, COMPLETE (S325: Russian) A-6065-324-A MB-85 BOARD, COMPLETE (S725D: E12B) A-6065-387-A MB-85 BOARD, COMPLETE (S725D: E12S) ********************* (Ref. No. 1,000 Series)
C337 C338 C339 C341 C343
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 25V 25V
C344 C401 C402 C403 C404
1-162-927-11 1-125-822-11 1-126-209-11 1-107-826-91 1-107-826-91
CERAMIC CHIP TANTAL. CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP
100PF 10uF 100uF 0.1uF 0.1uF
5% 20% 20% 10% 10%
50V 10V 4V 16V 16V
1-564-013-11 PIN, CONNECTOR 3P
8-719-071-15 DIODE HZM6.8ZWA1TL 8-719-071-15 DIODE HZM6.8ZWA1TL
1-414-135-11 FERRITE 1-414-135-11 FERRITE 1-414-135-11 FERRITE
0uH 0uH 0uH
1-785-505-41 JACK, LARGE TYPE (PHONES) (S725D) 1-785-505-31 JACK, LARGE TYPE (PHONES) (S525D) < JUMPER RESISTOR >
JR701
1-216-295-91 SHORT
0 (S525D)
< VARIABLE RESISTOR > RV701
1-225-738-11 RES, VAR, CARBON 500/500 (LEVEL)
*
A-6065-235-A MB-82 BOARD, COMPLETE
*
A-6065-247-A MB-82 BOARD, COMPLETE
* * * * * * * *
Remark 0.01uF
< JACK > J701 J701
Description
1-162-970-11 CERAMIC CHIP
< FERRITE BEAD > FB701 FB702 FB703
Part No.
C204
< DIODE > D701 D702
MB-85
< CAPACITOR > C001 C002 C003 C004 C005
1-162-970-11 1-164-227-11 1-126-246-11 1-126-204-11 1-126-206-11
CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP ELECT CHIP
0.01uF 0.022uF 220uF 47uF 100uF
10% 10% 20% 20% 20%
25V 25V 4V 16V 6.3V
C405 C406 C408 C410 C411
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 25V 25V
C007 C008 C010 C011 C012
1-162-970-11 1-162-970-11 1-162-970-11 1-125-822-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 10uF 0.01uF
10% 10% 10% 20% 10%
25V 25V 25V 10V 25V
C413 C414 C415 C416 C418
1-162-970-11 1-125-822-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 10uF 0.01uF 0.01uF 0.01uF
10% 20% 10% 10% 10%
25V 10V 25V 25V 25V
C013 C015 C016 C017 C018
1-162-970-11 1-126-246-11 1-125-822-11 1-162-970-11 1-125-822-11
CERAMIC CHIP ELECT CHIP TANTAL. CHIP CERAMIC CHIP TANTAL. CHIP
0.01uF 220uF 10uF 0.01uF 10uF
10% 20% 20% 10% 20%
25V 4V 10V 25V 10V
C420 C422 C425 C426 C428
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 25V 25V
C019 C201 C202 C203
1-162-970-11 1-162-919-11 1-162-919-11 1-125-822-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP
0.01uF 22PF 22PF 10uF
10% 5% 5% 20%
25V 50V 50V 10V
C431 C432 C433 C434
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10%
25V 25V 25V 25V
8-22
MB-82 Ref. No.
Part No.
Description
Remark
Ref. No.
MB-85
Part No.
Description
C812 C813 C814 C815 C816
1-162-967-11 1-162-967-11 1-165-176-11 1-110-666-11 1-104-601-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP
0.0033uF 0.0033uF 0.047uF 22uF 10uF
10% 10% 10% 20% 20%
50V 50V 16V 6.3V 10V
C817 C818 C819 C820 C821
1-115-467-11 1-107-826-91 1-107-826-91 1-164-230-11 1-164-230-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.22uF 0.1uF 0.1uF 220PF 220PF
10% 10% 10% 5% 5%
10V 16V 16V 50V 50V
C822 C823 C824 C825 C830
1-126-204-11 1-162-970-11 1-162-970-11 1-162-970-11 1-107-826-91
ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
47uF 0.01uF 0.01uF 0.01uF 0.1uF
20% 10% 10% 10% 10%
16V 25V 25V 25V 16V
C831 C832 C833 C834 C835
1-107-826-91 1-107-826-91 1-164-677-11 1-164-677-11 1-107-826-91
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 0.033uF 0.033uF 0.1uF
10% 10% 10% 10% 10%
16V 16V 16V 16V 16V
C836 C837 C904
1-115-467-11 CERAMIC CHIP 1-115-467-11 CERAMIC CHIP 1-163-021-91 CERAMIC CHIP
0.22uF 0.22uF 0.01uF
C905 C906
1-163-021-91 CERAMIC CHIP 1-127-950-21 FILM CHIP
0.01uF 0.01uF
10% 10V 10% 10V 10% 50V (S525D/S725D) 10% 50V 5% 16.5V (S725D)
C906
1-164-004-11 CERAMIC CHIP
0.1uF
C907 C908
1-125-822-11 TANTAL. CHIP 1-128-391-11 ELECT CHIP
10uF 330uF
C909
1-127-950-21 FILM CHIP
0.01uF
C909
1-164-004-11 CERAMIC CHIP
0.1uF
C910 C911
1-125-822-11 TANTAL. CHIP 1-127-950-21 FILM CHIP
10uF 0.01uF
C911
1-163-021-91 CERAMIC CHIP
0.01uF
C912
1-127-516-11 ELECT
220uF
C913
1-127-950-21 FILM CHIP
0.01uF
C913
1-164-004-11 CERAMIC CHIP
0.1uF
50V 50V 50V 50V 25V
C914
1-125-822-11 TANTAL. CHIP
10uF
C916
1-127-950-21 FILM CHIP
0.01uF
C916
1-163-021-91 CERAMIC CHIP
0.01uF
20% 10% 10% 5% 5%
16V 16V 16V 50V 50V
C922
1-127-950-21 FILM CHIP
0.01uF
C922
1-164-004-11 CERAMIC CHIP
0.1uF
5% 5% 10% 10% 10%
50V 50V 16V 16V 16V
C923 C924
1-107-826-91 CERAMIC CHIP 1-125-822-11 TANTAL. CHIP
0.1uF 10uF
C925
1-162-970-11 CERAMIC CHIP
0.01uF
C436
1-162-970-11 CERAMIC CHIP
0.01uF
10%
25V
C438 C439 C440 C441 C443
1-162-970-11 1-125-822-11 1-125-822-11 1-126-209-11 1-162-970-11
CERAMIC CHIP TANTAL. CHIP TANTAL. CHIP ELECT CHIP CERAMIC CHIP
0.01uF 10uF 10uF 100uF 0.01uF
10% 20% 20% 20% 10%
25V 10V 10V 4V 25V
C502
1-162-970-11 CERAMIC CHIP
0.01uF
10%
C505
1-162-970-11 CERAMIC CHIP
0.01uF
C506
1-162-970-11 CERAMIC CHIP
0.01uF
C508
1-162-970-11 CERAMIC CHIP
0.01uF
C510
1-162-970-11 CERAMIC CHIP
0.01uF
C512
1-162-970-11 CERAMIC CHIP
0.01uF
C513
1-162-970-11 CERAMIC CHIP
0.01uF
C514
1-162-970-11 CERAMIC CHIP
0.01uF
C515
1-162-970-11 CERAMIC CHIP
0.01uF
C516
1-162-970-11 CERAMIC CHIP
0.01uF
C517
1-162-970-11 CERAMIC CHIP
0.01uF
10%
C601 C602 C603 C604
1-125-822-11 1-162-970-11 1-162-970-11 1-162-970-11
TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
10uF 0.01uF 0.01uF 0.01uF
20% 10% 10% 10%
25V (S725D) 10V 25V 25V 25V
C605 C606 C607 C608 C701
1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.01uF 0.01uF
10% 10% 10% 10% 10%
25V 25V 25V 25V 25V
C702 C703 C704 C705 C706
1-162-970-11 1-107-826-91 1-107-826-91 1-165-176-11 1-165-176-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.1uF 0.1uF 0.047uF 0.047uF
10% 10% 10% 10% 10%
25V 16V 16V 16V 16V
C707 C708 C709 C710 C711
1-162-970-11 1-107-826-91 1-115-467-11 1-162-970-11 1-107-826-91
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.1uF 0.22uF 0.01uF 0.1uF
10% 10% 10% 10% 10%
25V 16V 10V 25V 16V
C712 C713 C714 C715 C717
1-162-968-11 1-162-968-11 1-162-968-11 1-162-968-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.0047uF 0.0047uF 0.0047uF 0.0047uF 0.01uF
10% 10% 10% 10% 10%
C801 C802 C803 C805 C806
1-126-204-11 1-107-826-91 1-107-826-91 1-162-923-11 1-162-923-11
ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
47uF 0.1uF 0.1uF 47PF 47PF
C807 C808 C809 C810 C811
1-162-927-11 1-162-927-11 1-110-563-11 1-110-563-11 1-165-176-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
100PF 100PF 0.068uF 0.068uF 0.047uF
25V (S725D) 10% 25V (S525D/S725D) 10% 25V (S525D/S725D) 10% 25V (S525D/S725D) 10% 25V (S525D/S725D) 10% 25V (S525D/S725D) 10% 25V (S725D) 10% 25V (S725D) 10% 25V (S725D) 10% 25V (S725D)
8-23
Remark
10% 25V (S325/S525D) 20% 10V 20% 6.3V (S325/S525D) 5% 16.5V (S725D) 10% 25V (S325/S525D) 20% 5%
10V 16.5V (S725D) 10% 50V (S325/S525D) 20% 10V (S725D) 5% 16.5V (S725D) 10%
25V (S525D) 20% 10V (S525D/S725D) 5% 16.5V (S725D) 10% 50V (S525D) 5% 16.5V (S725D) 10%
25V (S525D) 10% 16V 20% 10V (S525D/S725D) 10% 25V (S525D/S725D)
MB-82 Ref. No.
MB-85
Part No.
Description
Remark
Ref. No.
C926
1-107-826-91 CERAMIC CHIP
0.1uF
10% 16V (S525D/S725D)
C927
1-125-822-11 TANTAL. CHIP
10uF
C928
1-128-391-11 ELECT CHIP
330uF
C929
1-162-970-11 CERAMIC CHIP
0.01uF
C931
1-107-826-91 CERAMIC CHIP
0.1uF
C932
1-125-822-11 TANTAL. CHIP
10uF
20% 10V (S525D/S725D) 20% 6.3V (S525D/S725D) 10% 25V (S525D/S725D) 10% 16V (S525D/S725D) 20% 10V (S525D/S725D)
C933
1-162-970-11 CERAMIC CHIP
0.01uF
C934
1-107-826-91 CERAMIC CHIP
0.1uF
C935
1-125-822-11 TANTAL. CHIP
10uF
C937
1-162-970-11 CERAMIC CHIP
0.01uF
C939
1-107-826-91 CERAMIC CHIP
0.1uF
C940
1-125-822-11 TANTAL. CHIP
10uF
10% 25V (S525D/S725D) 10% 16V (S525D/S725D) 20% 10V (S525D/S725D) 10% 25V (S525D/S725D) 10% 16V (S525D/S725D) 20% 10V (S525D/S725D)
< CONNECTOR > CN001 CN002 CN003 CN004 CN005
1-785-728-21 1-779-936-11 1-779-936-11 1-778-772-11 1-784-327-11
PIN (PC BOARD), CONNECTOR 7P CONNECTOR, FFC/FPC 18P CONNECTOR, FFC/FPC 18P CONNECTOR, FFC/FPC 7P CONNECTOR, FFC/FPC 28P
CN006 CN007 CN010 CN011 * CN012
1-774-768-11 1-778-274-11 1-573-806-21 1-573-806-21 1-573-768-21
CONNECTOR, FFC/FPC 17P CONNECTOR, FFC/FPC 13P (S525D/S725D) PIN, CONNECTOR (1.5mm) (SMD) 6P PIN, CONNECTOR (1.5mm) (SMD) 6P PIN, CONNECTOR (1.5mm) (SMD) 5P < DIODE >
D701 D801 D802 D803 D804
8-719-988-61 8-719-941-09 8-719-988-61 8-719-941-09 8-719-941-86
DIODE DIODE DIODE DIODE DIODE
1SS355TE-17 DAP202U 1SS355TE-17 DAP202U DAN202U
D805 D806 D807
8-719-941-86 DIODE DAN202U 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17
Part No.
Description
Remark
FB015
1-469-116-21 FERRITE
0uH
FB016 FB017 FB018 FB019 FB020
1-216-801-11 1-469-116-21 1-469-116-21 1-469-116-21 1-469-116-21
METAL CHIP FERRITE FERRITE FERRITE FERRITE
22 0uH 0uH 0uH 0uH
FB021 FB022 FB024 FB026 FB028
1-469-116-21 1-216-829-11 1-469-116-21 1-216-829-11 1-469-116-21
FERRITE METAL CHIP FERRITE METAL CHIP FERRITE
0uH 4.7K 0uH 4.7K 0uH
FB029 FB030 FB031 FB032 FB033
1-469-324-21 1-469-116-21 1-469-116-21 1-469-116-21 1-469-116-21
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH 0uH
FB035 FB037 FB040 FB043 FB047
1-216-829-11 1-216-829-11 1-469-116-21 1-500-283-11 1-469-116-21
METAL CHIP METAL CHIP FERRITE INDUCTOR CHIP FERRITE
4.7K 4.7K 0uH 0uH 0uH
FB049 FB051 FB053 FB054 FB055
1-469-116-21 1-469-116-21 1-500-283-11 1-500-283-11 1-500-283-11
FERRITE FERRITE INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP
0uH 0uH 0uH 0uH 0uH
FB056 FB058 FB060 FB061 FB063
1-500-283-11 1-500-283-11 1-500-283-11 1-469-116-21 1-216-829-11
INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP FERRITE METAL CHIP
0uH 0uH 0uH 0uH (S525D/S725D) 4.7K 5% 1/16W (S525D/S725D)
FB065 FB067
1-469-116-21 FERRITE 1-216-829-11 METAL CHIP
FB069 FB071
1-469-116-21 FERRITE 1-216-829-11 METAL CHIP
FB073
1-469-116-21 FERRITE
0uH (S525D/S725D) 4.7K 5% 1/16W (S525D/S725D) 0uH (S525D/S725D) 4.7K 5% 1/16W (S525D/S725D) 0uH (S525D/S725D)
FB075
1-216-829-11 METAL CHIP
4.7K
FB077 FB078
1-469-116-21 FERRITE 1-216-801-11 METAL CHIP
FB080 FB081
1-216-801-11 METAL CHIP 1-216-801-11 METAL CHIP
5% 1/16W (S525D/S725D) 0uH (S525D/S725D) 22 5% 1/16W (S525D/S725D) 22 5% 1/16W 22 5% 1/16W
FB083 FB084 FB085 FB086
1-216-801-11 1-216-801-11 1-216-801-11 1-216-801-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP
22 22 22 22
5% 5% 5% 5%
FB087
1-216-801-11 METAL CHIP
22
5%
FB088
1-216-801-11 METAL CHIP
22
5% 1/16W (S525D/S725D)
FB105 FB106
1-469-324-21 FERRITE 1-469-324-21 FERRITE
0uH 0uH
5%
1/16W
5%
1/16W
5%
1/16W
5% 5%
1/16W 1/16W
< FERRITE BEAD > FB001 FB002 FB003 FB004 FB005
1-469-324-21 1-469-324-21 1-469-324-21 1-469-324-21 1-469-324-21
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH 0uH
FB006 FB007 FB008 FB009 FB010
1-469-324-21 1-469-324-21 1-469-324-21 1-469-116-21 1-469-116-21
FERRITE FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH 0uH (EXCEPT Australian) 0uH
FB011 FB012 FB013 FB014
1-469-116-21 1-469-116-21 1-469-116-21 1-469-116-21
FERRITE FERRITE FERRITE FERRITE
0uH 0uH 0uH (EXCEPT Australian) 0uH
< FILTER > FL001 FL002 FL003
8-24
1-234-177-21 FILTER, CHIP EMI 1-234-177-21 FILTER, CHIP EMI 1-233-893-21 FILTER, CHIP EMI
1/16W 1/16W 1/16W 1/16W (S725D) 1/16W
MB-82 Ref. No.
Part No.
Description
FL004 FL005
1-233-893-21 FILTER, CHIP EMI 1-234-177-21 FILTER, CHIP EMI
FL006 FL008 FL009 FL010 FL014
1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21
FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI
FL015 FL016 FL202 FL203 FL204
1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21
FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI
FL205 FL301 FL302 FL303 FL401
1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21
FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI
FL402 FL403 FL404 FL405 FL501
1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21
FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI (S725D)
FL502 FL503 FL601 FL602 FL701
1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21 1-234-177-21
FILTER, CHIP EMI (S525D/S725D) FILTER, CHIP EMI (S725D) FILTER, CHIP EMI FILTER, CHIP EMI (S725D) FILTER, CHIP EMI
FL904
1-234-177-21 FILTER, CHIP EMI (S525D/S725D)
Remark
Ref. No. IC902 IC904 IC905 IC906 IC907
Part No.
Description
8-759-572-26 8-759-052-52 8-759-572-26 8-759-572-26 8-759-572-26
IC IC IC IC IC
MB-85 Remark
CXD8799N-T2 L78M05T-FA CXD8799N-T2 (S525D/S725D) CXD8799N-T2 (S525D/S725D) CXD8799N-T2 (S525D/S725D)
< COIL > L001 L402
1-414-754-11 INDUCTOR 1-414-754-11 INDUCTOR
10uH 10uH
< TRANSISTOR > Q801 Q802 Q803
8-729-015-74 TRANSISTOR UN5111-TX 8-729-230-63 TRANSISTOR 2SC4116-YG 8-729-230-63 TRANSISTOR 2SC4116-YG < RESISTOR >
< IC >
R001 R002 R003 R004 R005
1-216-833-11 1-216-833-11 1-216-833-11 1-216-821-11 1-216-821-11
RES, CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
10K 10K 10K 1K 1K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R006 R007 R009 R010 R014
1-216-821-11 1-216-864-11 1-216-864-11 1-216-801-11 1-216-801-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
1K 0 0 22 22
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R036 R037 R040
1-216-821-11 METAL CHIP 1-216-825-11 METAL CHIP 1-216-864-11 METAL CHIP
1K 2.2K 0
5% 5% 5%
R044 R045
1-216-829-11 METAL CHIP 1-216-833-11 RES, CHIP
4.7K 10K
5% 5%
1/16W 1/16W 1/16W (Australian) 1/16W 1/16W
R053 R202 R203 R204 R205
1-216-833-11 1-216-801-11 1-216-833-11 1-216-833-11 1-216-845-11
RES, CHIP METAL CHIP RES, CHIP RES, CHIP METAL CHIP
10K 22 10K 10K 100K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R206 R207 R212 R213 R217
1-216-845-11 1-216-833-11 1-216-813-11 1-216-801-11 1-216-833-11
METAL CHIP RES, CHIP METAL CHIP METAL CHIP RES, CHIP
100K 10K 220 22 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
IC001 IC003 IC004 IC005 IC201
8-759-567-31 8-759-531-92 8-759-531-92 8-759-486-55 8-759-469-25
IC IC IC IC IC
PLL1700E/2K TC7WH04FU (TE12R) TC7WH04FU (TE12R) NJM2370U33-TE2 AK6440AF-E2
IC202 IC203 IC204 IC205 IC205
8-759-599-39 8-759-580-60 8-759-573-65 8-759-593-83 8-759-594-03
IC IC IC IC IC
MB91101APFV-G-BND SN74AHCT08PWR IDT71V016S20PHAU-TL MBM29LV160B-210B-20 (S325) MBM29LV160B-230B-20 (S525D)
IC206 IC206 IC207 IC302 IC303
8-759-640-51 IC MR27V1602D-18MAZ060 (S725D: E) 8-759-644-24 IC MR27V1602D-24MAZ060 (S725D: EXCEPT E) 8-759-427-92 IC PST9126NL 8-759-486-55 IC NJM2370U33-TE2 8-759-567-27 IC CXD8784R
R222 R223 R225 R226 R227
1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11 1-216-813-11
RES, CHIP RES, CHIP RES, CHIP RES, CHIP METAL CHIP
10K 10K 10K 10K 220
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
IC304 IC401 IC402 IC403 IC404
8-759-567-35 8-752-398-60 8-759-567-34 8-759-567-34 8-759-486-55
IC IC IC IC IC
KM416V1200CT-L6T CXD1930BQ KM416S1020CT-G10T KM416S1020CT-G10T NJM2370U33-TE2
R228 R229 R230 R231 R232
1-216-813-11 1-216-813-11 1-216-813-11 1-216-813-11 1-216-813-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
220 220 220 220 220
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
IC501 IC502 IC601 IC602 IC701
8-752-400-43 8-752-390-12 8-759-567-30 8-759-567-55 8-759-598-87
IC IC IC IC IC
CXD1901AR (S525D/S725D) CXD1857Q (S725D) CXD8788Q KM29V16000AT-T (S725D) CXD8791AQ
R235 R237
1-216-864-11 METAL CHIP 1-216-216-00 RES, CHIP
0 5.6K
5% 5%
IC702 IC801 IC802 IC803
8-759-337-40 8-759-522-13 8-759-567-26 8-759-338-78
IC IC IC IC
NJM2904V (TE2) BA5981FP-E2 BA5983FP-E2 BA10324AFV-E2
R237 R237 R237
8-25
1/16W 1/8W (E12B) 1-216-220-00 RES, CHIP 8.2K 5% 1/8W (Australian) 1-216-224-91 RES, CHIP 12K 5% 1/8W (S525D: Russian/S725D: Russian) 1-216-230-00 RES, CHIP 22K 5% 1/8W (S525D: EXCEPT Russian, Australian/ S725D: EXCEPT Russian, Australian, E12B)
MB-82 Ref. No.
MB-85
Part No.
Description
Remark
Ref. No.
R237
1-216-238-91 RES, CHIP
R237
1-216-246-00 RES, CHIP
R238
1-216-224-91 RES, CHIP
R238
1-216-238-91 RES, CHIP
R239
1-216-224-91 RES, CHIP
R239
1-216-230-00 RES, CHIP
R239
1-216-246-00 RES, CHIP
R240
1-216-216-00 RES, CHIP
R240
1-216-220-00 RES, CHIP
R240
1-216-224-91 RES, CHIP
R240
1-216-230-00 RES, CHIP 22K 5% 1/8W (S525D: EXCEPT Russian, Auatralian/ S725D: EXCEPT Russian, Auatralian, E12B) 1-216-238-91 RES, CHIP 47K 5% 1/8W (S325: Russian) 1-216-246-00 RES, CHIP 100K 5% 1/8W (S325: EXCEPT Russian) 1-216-224-91 RES, CHIP 12K 5% 1/8W (S725D) 1-216-238-91 RES, CHIP 47K 5% 1/8W (S525D)
R240 R240 R241 R241
47K
5% 1/8W (S325: Russian) 100K 5% 1/8W (S325: EXCEPT Russian) 12K 5% 1/8W (S725D) 47K 5% 1/8W (S525D) 12K 5% 1/8W (Russian, E12B) 22K
5%
1/8W (Australian) 100K 5% 1/8W (EXCEPT Russian, Australian, E12B) 5.6K 5% 1/8W (E12B) 8.2K 5% 1/8W (Australian) 12K 5% 1/8W (S525D: Russian/S725D: Russian)
Part No.
Description
R403 R404 R405 R406
1-216-833-11 1-216-864-11 1-216-827-11 1-216-822-11
RES, CHIP METAL CHIP METAL CHIP METAL CHIP
10K 0 3.3K 1.2K
5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W
Remark
R407 R409 R410 R411 R412
1-216-833-11 1-216-864-11 1-216-821-11 1-216-833-11 1-216-809-11
RES, CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP
10K 0 1K 10K 100
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R426 R427 R428 R429 R430
1-216-813-11 1-216-813-11 1-216-813-11 1-216-813-11 1-216-813-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
220 220 220 220 220
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R431 R501
1-216-813-11 METAL CHIP 1-216-809-11 METAL CHIP
220 100
5% 5%
R502
1-216-806-11 RES, CHIP
56
R519
1-216-809-11 METAL CHIP
100
R520
1-216-833-11 RES, CHIP
10K
R521
1-216-833-11 RES, CHIP
10K
R522
1-216-833-11 RES, CHIP
10K
R527 R528 R529
1-216-833-11 RES, CHIP 1-216-833-11 RES, CHIP 1-216-864-11 METAL CHIP
10K 10K 0
R530
1-216-864-11 METAL CHIP
0
R536
1-216-864-11 METAL CHIP
0
R537
1-216-806-11 RES, CHIP
56
R538
1-216-864-11 METAL CHIP
0
R539
1-216-864-11 METAL CHIP
0
1/16W 1/16W (S725D) 5% 1/16W (S325) 5% 1/16W (S525D/S725D) 5% 1/16W (S525D/S725D) 5% 1/16W (S525D/S725D) 5% 1/16W (S525D/S725D) 5% 1/16W 5% 1/16W 5% 1/16W (S325)
R305 R306 R307 R308 R309
1-218-879-11 1-218-831-11 1-218-883-11 1-216-825-11 1-216-838-11
RES, CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
22K 220 33K 2.2K 27K
0.50% 0.50% 0.50% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R310 R313 R314 R315 R316
1-216-825-11 1-216-833-11 1-216-833-11 1-216-833-11 1-218-855-11
METAL CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
2.2K 10K 10K 10K 2.2K
5% 5% 5% 5% 0.50%
1/16W 1/16W 1/16W 1/16W 1/16W
R317 R318 R319 R320 R321
1-218-871-11 1-216-849-11 1-216-831-11 1-218-853-11 1-218-847-11
RES, CHIP METAL CHIP METAL CHIP RES, CHIP RES, CHIP
10K 220K 6.8K 1.8K 1K
0.50% 5% 5% 0.50% 0.50%
1/16W 1/16W 1/16W 1/16W 1/16W
R540
1-216-864-11 METAL CHIP
0
R541
1-216-864-11 METAL CHIP
0
R543
1-216-864-11 METAL CHIP
0
R322 R323 R324 R325 R326
1-218-871-11 1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11
RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
10K 10K 10K 10K 10K
0.50% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R544
1-216-864-11 METAL CHIP
0
R604
1-216-833-11 RES, CHIP
10K
R327 R328 R329 R330 R331
1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11
RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
10K 10K 10K 10K 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R605 R606 R630 R631 R632
1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11
RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
10K 10K 10K 10K 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R332 R337 R338 R339 R340
1-216-833-11 1-216-809-11 1-216-833-11 1-216-833-11 1-216-833-11
RES, CHIP METAL CHIP RES, CHIP RES, CHIP RES, CHIP
10K 100 10K 10K 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R633 R634 R635 R636 R637
1-216-833-11 1-216-833-11 1-216-833-11 1-216-815-11 1-216-809-11
RES, CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP
10K 10K 10K 330 100
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R341
1-216-809-11 METAL CHIP
100
5%
1/16W
R638 R639
1-216-809-11 METAL CHIP 1-216-809-11 METAL CHIP
100 100
5% 5%
1/16W 1/16W
8-26
5% 1/16W (S525D/S725D) 5% 1/16W (S325) 5% 1/16W (S525D/S725D) 5% 1/16W (S325) 5% 1/16W (S525D/S725D) 5% 1/16W (S525D/S725D) 5% 1/16W (S525D/S725D) 5% 1/16W (S525D/S725D) 5% 1/16W (S525D/S725D) 5% 1/16W (S725D)
MB-82 Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
MB-85
MS-29
Description
Remark
R640 R641 R642
1-216-809-11 METAL CHIP 1-216-809-11 METAL CHIP 1-216-809-11 METAL CHIP
100 100 100
5% 5% 5%
1/16W 1/16W 1/16W
R837 R838 R839
1-216-844-11 METAL CHIP 1-216-848-11 METAL CHIP 1-216-848-11 METAL CHIP
82K 180K 180K
5% 5% 5%
1/16W 1/16W 1/16W
R643 R647 R701 R702 R703
1-216-815-11 1-216-833-11 1-216-805-11 1-216-817-11 1-216-817-11
METAL CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP
330 10K 47 470 470
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R840 R841 R842 R843 R844
1-216-848-11 1-216-843-11 1-216-844-11 1-216-844-11 1-216-843-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
180K 68K 82K 82K 68K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R704 R705 R706 R707 R708
1-216-817-11 1-216-817-11 1-216-821-11 1-216-844-11 1-216-844-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
470 470 1K 82K 82K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R845 R846 R847 R851 R852
1-216-843-11 1-216-841-11 1-216-296-91 1-216-833-11 1-216-833-11
METAL CHIP METAL CHIP SHORT RES, CHIP RES, CHIP
68K 47K 0 10K 10K
5% 5%
1/16W 1/16W
5% 5%
1/16W 1/16W
R709 R710 R711 R712 R720
1-216-844-11 1-216-844-11 1-216-833-11 1-216-839-11 1-216-821-11
METAL CHIP METAL CHIP RES, CHIP METAL CHIP METAL CHIP
82K 82K 10K 33K 1K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R853 R854 R855 R856 R857
1-216-833-11 1-216-833-11 1-216-834-11 1-216-836-11 1-218-899-11
RES, CHIP RES, CHIP METAL CHIP METAL CHIP RES, CHIP
10K 10K 12K 18K 150K
5% 5% 5% 5% 0.50%
1/16W 1/16W 1/16W 1/16W 1/16W
R721 R722 R748 R751 R752
1-216-821-11 1-216-801-11 1-216-833-11 1-216-821-11 1-216-821-11
METAL CHIP METAL CHIP RES, CHIP METAL CHIP METAL CHIP
1K 22 10K 1K 1K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R858 R859 R860 R861 R864
1-218-899-11 1-218-889-11 1-218-889-11 1-216-296-91 1-216-138-00
RES, CHIP RES, CHIP RES, CHIP SHORT METAL CHIP
150K 56K 56K 0 3.3
0.50% 1/16W 0.50% 1/16W 0.50% 1/16W 5%
1/8W
R755 R757 R758 R801 R802
1-216-830-11 1-216-864-11 1-216-864-11 1-216-841-11 1-216-841-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
5.6K 0 0 47K 47K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R865 R866 R867 R868 R869
1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11
RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP
10K 10K 10K 10K 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R803 R804 R805 R806 R807
1-216-841-11 1-216-841-11 1-216-840-11 1-216-840-11 1-216-835-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
47K 47K 39K 39K 15K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R870 R871 R872 R873 R909
1-216-815-11 1-216-817-11 1-216-815-11 1-216-821-11 1-216-809-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
330 470 330 1K 100
5% 1/16W 5% 1/16W 5% 1/16W 5% 1/16W 5% 1/16W (S525D/S725D)
R808 R809 R810 R811 R812
1-216-835-11 1-216-844-11 1-216-844-11 1-218-907-11 1-218-895-11
METAL CHIP METAL CHIP METAL CHIP RES, CHIP RES, CHIP
15K 82K 82K 330K 100K
5% 5% 5% 0.50% 0.50%
1/16W 1/16W 1/16W 1/16W 1/16W
R912
1-216-809-11 METAL CHIP
100
R915 R918
1-216-809-11 METAL CHIP 1-216-809-11 METAL CHIP
100 100
5% 1/16W (S525D/S725D) 5% 1/16W 5% 1/16W (S525D/S725D)
R813 R814 R815 R816 R817
1-218-895-11 1-218-907-11 1-216-836-11 1-216-845-11 1-216-852-11
RES, CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP
100K 330K 18K 100K 390K
0.50% 0.50% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R818 R819 R820 R821 R822
1-216-852-11 1-216-849-11 1-216-851-11 1-216-840-11 1-216-845-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
390K 220K 330K 39K 100K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R823 R824 R825 R826 R827
1-216-833-11 1-216-833-11 1-216-830-11 1-216-830-11 1-216-851-11
RES, CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP
10K 10K 5.6K 5.6K 330K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R828 R829 R831 R832 R834
1-216-837-11 1-216-837-11 1-216-833-11 1-216-833-11 1-216-847-11
METAL CHIP METAL CHIP RES, CHIP RES, CHIP METAL CHIP
22K 22K 10K 10K 150K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R835 R836
1-216-847-11 METAL CHIP 1-216-847-11 METAL CHIP
150K 150K
5% 5%
1/16W 1/16W
< COMPOSITION CIRCUIT BLOCK > * * * * *
RB201 RB202 RB203 RB204 RB601
1-233-270-11 1-233-270-11 1-233-270-11 1-233-270-11 1-233-270-11
NETWORK, RES (8 GANG) 10K NETWORK, RES (8 GANG) 10K NETWORK, RES (8 GANG) 10K NETWORK, RES (8 GANG) 10K NETWORK, RES (8 GANG) 10K < VARIABLE RESISTOR >
RV401
1-223-583-11 RES, ADJ, CARBON 1K < VIBRATOR >
X001 X201
1-781-188-21 OSCILLATOR, CRYSTAL (27MHz) 1-781-185-21 VIBRATOR, CERAMIC (12.5MHz)
A-6066-012-A MS-29 BOARD, COMPLETE ********************** (Ref. No. 3,000 Series)
*
< CONNECTOR > CN001
8-27
1-564-722-11 PIN, CONNECTOR (SMALL TYPE) 6P
MB-29 Ref. No.
POWER BLOCK
Part No.
RY-12
Description
SW-314 Remark
< SWITCH > S001 S002
SW-316
Ref. No.
Part No.
! P511 ! P611
1-533-589-11 IC LINK 750mA 9-884-090-01 IC LINK 1.5A
SW-317
Description
Remark
< PHOTO COUPLER >
1-771-562-11 SWITCH, LEVER (TRAY SENSOR) 1-762-386-11 SWITCH, PUSH (CHUCK SENSOR)
1-468-359-11 POWER BLOCK (HS-030SH) ********************** (Ref.No. 6,000 Series)
*
SW-315
! PC101 ! PC102 ! PC103
< TRANSISTOR >
< CAPACITOR > C110 C131 C132 C186 C211
9-884-088-01 1-126-964-11 1-126-960-11 1-107-967-11 1-111-087-11
ELECT ELECT ELECT ELECT ELECT
56uF 10uF 1uF 1uF 330uF
400V 50V 50V 400V 35V
C213 C301 C311 C313 C401
1-126-947-11 1-126-960-11 1-111-087-11 1-126-947-11 1-126-948-11
ELECT ELECT ELECT ELECT ELECT
47uF 1uF 330uF 47uF 100uF
35V 50V 35V 35V 35V
C402 C511 C512 C611 C613
1-126-960-11 1-126-942-11 1-126-947-11 1-111-090-11 1-126-947-11
ELECT ELECT ELECT ELECT ELECT
1uF 1000uF 47uF 560uF 47uF
50V 25V 35V 35V 35V
8-749-010-59 PHOTO COUPLER TLP721F 8-749-010-59 PHOTO COUPLER TLP721F 8-749-010-59 PHOTO COUPLER TLP721F
Q101 Q102 Q103 Q131 Q181
9-880-450-01 8-729-023-98 9-880-450-01 8-729-023-98 8-729-046-40
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
2SK2333 2SC3377 2SK2333 2SC3377 2SK2663
Q182 Q183
8-729-023-98 TRANSISTOR 2SC3377 8-729-046-40 TRANSISTOR 2SK2663 < RESISTOR >
R152
1-219-121-21 FUSIBLE
0.22
1/4W F
< TRANSFORMER > ! T101 ! T102
9-884-091-01 TRANSFORMER OM-98024 9-884-092-01 TRANSFORMER OM-98060
*
A-6065-255-A RY-12 BOARD, COMPLETE (S725D) ********************* (Ref. No. 2,000 Series)
< DIODE > D101 D102 D104 D105 D131
9-884-089-01 8-719-160-68 8-719-109-57 9-980-073-01 9-980-073-01
DIODE DIODE DIODE DIODE DIODE
S1WBA60 RD18FB2 RD2.4ESB2 1SS270A 1SS270A
D132 D133 D135 D182 D183
9-980-073-01 8-719-109-60 9-980-073-01 8-719-109-60 9-980-073-01
DIODE DIODE DIODE DIODE DIODE
1SS270A RD2.7ESB2 1SS270A RD2.7ESB2 1SS270A
D184 D185 D211 D212 D311
9-880-435-01 8-719-160-68 8-719-027-43 8-719-160-78 8-719-200-59
DIODE DIODE DIODE DIODE DIODE
D1N60 RD18FB2 S2L20U RD24FB2 21DQ04
D401 D402 D511 D611
8-719-210-21 8-719-110-02 8-719-027-43 8-719-500-50
DIODE DIODE DIODE DIODE
11EQS04 RD7.5ESB1 S2L20U D3S4M
< CONNECTOR > * CN101 * CN201 * CN202
1-580-230-21 PIN, CONNECTOR (PC BOARD) 2P 1-691-960-11 PIN, CONNECTOR (PC BOARD) 3P 1-564-001-11 PIN, CONNECTOR 2P < DIODE >
D101
8-719-911-19 DIODE 1SS119 < RELAY >
! RY101
1-755-318-11 RELAY, POWER
*
A-6065-230-A SW-314 BOARD, COMPLETE (S525D: EXCEPT Auatralian) A-6065-243-A SW-315 BOARD, COMPLETE (S725D: Australian) A-6065-253-A SW-316 BOARD, COMPLETE (S725D: EXCEPT Auatralian) A-6065-221-A SW-317 BOARD, COMPLETE (S525D: Australian) ********************** (Ref. No. 4,000 Series)
* * *
< FUSE > ! F101
1-532-503-31 FUSE (1.6A/250V) < IC >
IC301 IC401
< CONNECTOR >
8-759-420-19 IC AN1431T 8-759-420-19 IC AN1431T
CN099
1-785-539-21 CONNECTOR, BOARD TO BOARD 4P < DIODE >
< IC LINK > ! P211 ! P311
D098 D098
1-533-588-11 IC LINK 500mA 1-533-593-11 IC LINK 2A
8-28
8-719-056-06 DIODE SLR-342DCT31 (VES) (S525D) 8-719-056-06 DIODE SLR-342DCT31 (VIRTUAL 3D SURROUND) (S725D) The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
SW-314 Ref. No.
Part No.
Description
SW-315 Remark
SW-316
Ref. No.
Part No.
SW-317
TK-51
TK-54
Description
Remark
< CONNECTOR > < TRANSISTOR > Q098
CN001 CN002 CN003 CN004
8-729-421-22 TRANSISTOR UN2211 < RESISTOR >
R098
1-216-041-00 METAL CHIP
470
5%
CONNECTOR, FFC/FPC (ZIF) 23P CONNECTOR, FPC (ZIF) 13P CONNECTOR, FFC/FPC 18P CONNECTOR, FFC/FPC 18P < DIODE >
1/10W D003
< SWITCH > S098 S098
1-785-700-21 1-566-529-11 1-785-699-21 1-785-699-21
8-719-988-61 DIODE 1SS355TE-17 < IC >
1-771-349-21 SWITCH, KEYBOARD (VES) (S525D) 1-771-349-21 SWITCH, KEYBOARD (VIRTUAL 3D SURROUND) (S725D)
IC001
8-759-567-24 IC SSI33P3722 < COIL >
A-6065-214-A TK-51 BOARD, COMPLETE (Australian) A-6065-256-A TK-54 BOARD, COMPLETE (EXCEPT Australian) ********************* (Ref. No. 2,000 Series)
* *
L001
< TRANSISTOR > Q001 Q002
< CAPACITOR > C004 C005 C006 C007 C008
1-107-826-91 1-162-966-11 1-124-779-00 1-162-966-11 1-162-966-11
CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.0022uF 10uF 0.0022uF 0.0022uF
10% 10% 20% 10% 10%
16V 50V 16V 50V 50V
C009 C010 C011 C012 C013
1-162-966-11 1-107-826-91 1-162-919-11 1-124-779-00 1-162-919-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP
0.0022uF 0.1uF 22PF 10uF 22PF
10% 10% 5% 20% 5%
50V 16V 50V 16V 50V
C014 C015 C016 C017 C018
1-162-919-11 1-162-919-11 1-162-970-11 1-164-172-11 1-164-739-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
22PF 22PF 0.01uF 0.0056uF 560PF
5% 5% 10% 10% 5%
50V 50V 25V 25V 50V
C019 C020 C021 C022 C023
1-164-172-11 1-107-826-91 1-107-826-91 1-107-826-91 1-165-176-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.0056uF 0.1uF 0.1uF 0.1uF 0.047uF
10% 10% 10% 10% 10%
25V 16V 16V 16V 16V
C024 C025 C026 C027 C028
1-164-730-11 1-165-176-11 1-162-964-11 1-164-217-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.0012uF 0.047uF 0.001uF 150PF 0.01uF
10% 10% 10% 5% 10%
50V 16V 50V 50V 25V
C029 C030 C031 C032 C033
1-107-826-91 1-107-826-91 1-124-779-00 1-107-826-91 1-107-826-91
CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 10uF 0.1uF 0.1uF
10% 10% 20% 10% 10%
16V 16V 16V 16V 16V
C034 C035 C036 C037 C038
1-107-826-91 1-107-826-91 1-165-176-11 1-164-739-11 1-107-826-91
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 0.047uF 560PF 0.1uF
10% 10% 10% 5% 10%
16V 16V 16V 50V 16V
C039 C040 C041
1-107-826-91 CERAMIC CHIP 1-162-969-11 CERAMIC CHIP 1-162-966-11 CERAMIC CHIP
0.1uF 10% 0.0068uF 10% 0.0022uF 10%
16V 25V 50V
1-412-031-11 INDUCTOR CHIP 47uH
8-729-903-46 TRANSISTOR 2SB1132-T100-QR 8-729-015-76 TRANSISTOR UN5211-TX < RESISTOR >
R001 R002 R003 R004 R005
1-216-815-11 1-216-809-11 1-216-809-11 1-216-837-11 1-216-013-00
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
330 100 100 22K 33
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/10W
R006 R007 R008 R009 R010
1-216-013-00 1-216-841-11 1-216-797-11 1-216-834-11 1-216-833-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP
33 47K 10 12K 10K
5% 5% 5% 5% 5%
1/10W 1/16W 1/16W 1/16W 1/16W
R012 R014 R015 R016 R017
1-216-864-11 1-216-864-11 1-216-833-11 1-216-833-11 1-216-829-11
METAL CHIP METAL CHIP RES, CHIP RES, CHIP METAL CHIP
0 0 10K 10K 4.7K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R018 R022 R023 R025 R026
1-216-833-11 1-216-811-11 1-216-820-11 1-216-813-11 1-216-864-11
RES, CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 150 820 220 0
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R029
1-216-861-11 METAL CHIP
2.2M
5%
1/16W
MISCELLANEOUS ************** 115 117 127 153 154
1-418-097-11 1-771-564-11 1-790-167-11 1-790-166-11 1-790-163-11
155
1-790-164-11 CABLE, FLEXIBLE FLAT (FMA-8) (S525D/S725D) 1-790-165-11 CABLE, FLEXIBLE FLAT (FMA-9) (S525D/S725D) 1-769-744-91 CORD, POWER (EXCEPT Auatralian) 1-790-588-11 CORD, POWER (Australian)
156 !161 ! 161
8-29
ENCODER, ROTARY (S525D/S725D) SWITCH, TACTILE (S325) CABLE, FLEXIBLE FLAT (FMF-35) CABLE, FLEXIBLE FLAT (FMT-25) CABLE, FLEXIBLE FLAT (FMA-7)
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
Ref. No.
Part No.
Description
Remark
166
1-790-168-11 CABLE, FLEXIBLE FLAT (FEA-4) (S725D: EXCEPT Auatralian)
166
1-790-408-11 CABLE, FLEXIBLE FLAT (FME-4) (S325/S525D: EXCEPT Auatralian) 8-820-081-03 OPTICAL PICK-UP KHM-220AAA/J1RP 1-541-632-11 MOTOR, DC (LOADING) 1-431-175-21 TRANSFORMER, POWER (S725D)
! 220 M001 ! T901
Ref. No.
************** HARDWARE LIST ************** #1 #2 #3
7-685-885-09 SCREW +BVTT 4X16 (S) (S725D) 7-621-775-10 SCREW +B 2.6X4 7-685-136-19 SCREW +BTP 2.6X12 TYPE2 N-S
ACCESSORIES & PACKING MATERIALS ******************************** 1-418-320-31 COMMANDER, STANDARD (RMT-D108P) (S525D: EXCEPT Australian) 1-418-320-71 COMMANDER, STANDARD (RMT-D109P) (S325) 1-418-320-81 COMMANDER, STANDARD (RMT-D108O) (S525D: Australian) 1-418-321-31 COMMANDER, STANDARD (RMT-D111P) (S725D: EXCEPT Australian) 1-418-321-81 COMMANDER, STANDARD (RMT-D111O) (S725D: Australian)
!
1-575-334-11 CORD, CONNECTION (STEREO AV CABLE 1.5m) (S325/S525D) 1-575-334-41 CORD, CONNECTION (STEREO AV CABLE 1.5m) (S725D) 1-575-335-21 CORD, CONNECTION (S-VIDEO CABLE 1.5m) (S325/S525D) 1-770-019-11 ADAPTOR, CONVERSION PLUG 3P (EXCEPT Russian, Australian) 1-776-078-31 CORD, CONNECTION (S-VIDEO CABLE 1.5m) (S725D)
Part No.
Description
Remark
3-866-153-11 MANUAL, INSTRUCTION (ARABIC) (S725D: E12S) 3-866-153-23 MANUAL, INSTRUCTION (ENGLISH) (S725D: EXCEPT E12S, Russian, Australian) 3-866-153-31 MANUAL, INSTRUCTION (FRENCH, GERMAN) (S725D: EXCEPT E12S, Russian, Australian) 3-866-153-41 MANUAL, INSTRUCTION (ITALIAN, DUTCH) (S725D: EXCEPT Russian, Australian) 3-866-153-51 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) (S725D: EXCEPT Russian, Australian) 3-866-153-61 MANUAL, INSTRUCTION (DANISH, FINNISH) (S725D: EXCEPT Russian, Australian) 3-866-153-71 MANUAL, INSTRUCTION (SWEDISH, NORWEGIAN) (S725D: EXCEPT Russian, Australian) 3-866-153-81 MANUAL, INSTRUCTION (ENGLISH, RUSSIAN) (S725D: Russian) 3-866-153-91 MANUAL, INSTRUCTION (ENGLISH) (S725D: Australian) 3-866-504-31 MANUAL, INSTRUCTION (ENGLISH) (S325: EXCEPT Russian) 3-866-504-41 MANUAL, INSTRUCTION (FRENCH, GERMAN) (S325: EXCEPT Russian) 3-866-504-51 MANUAL, INSTRUCTION (ITALIAN, DUTCH) (S325: EXCEPT Russian) 3-866-504-61 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) (S325: AEP) 3-866-504-71 MANUAL, INSTRUCTION (DANISH, FINNISH) (S325: EXCEPT Russian) 3-866-504-81 MANUAL, INSTRUCTION (SWEDISH, NORWEGIAN) (S325: EXCEPT Russian) 3-866-504-91 MANUAL, INSTRUCTION (ENGLISH, RUSSIAN) (S325: Russian)
3-053-633-01 COVER, BATTERY (for RMT-D108O/D108P/ D109P) (S325/S525D) 3-055-539-01 COVER, BATTERY (for RMT-D111O/D111P) (S725D) 3-865-642-41 MANUAL, INSTRUCTION (ENGLISH) (S525D: EXCEPT Russian, Australian) 3-865-642-51 MANUAL, INSTRUCTION (FRENCH, GERMAN) (S525D: EXCEPT Russian, Australian) 3-865-642-61 MANUAL, INSTRUCTION (ITALIAN, DUTCH) (S525D: EXCEPT Russian, Australian) 3-865-642-71 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) (S525D: EXCEPT Russian, Australian) 3-865-642-81 MANUAL, INSTRUCTION (DANISH, FINNISH) (S525D: EXCEPT Russian, Australian) 3-865-642-91 MANUAL, INSTRUCTION (SWEDISH, NORWEGIAN) (S525D: EXCEPT Russian, Australian) 3-865-643-11 MANUAL, INSTRUCTION (ENGLISH, RUSSIAN) (S525: Russian) 3-865-643-21 MANUAL, INSTRUCTION (ENGLISH) (S525: Australian)
8-30 8-30E
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
DVP-S325/S525D/S725D
Sony Corporation 9-921-718-12
Home Video Company
– 212 –
99G05026-1D Printed in Japan © 1999. 7 Published by Quality Assurance Dept.
Related Documents
Sony
November 2019 37
Sony
November 2019 43
Sony
May 2020 27
Sony
May 2020 31
Sony Australia
May 2020 12