Sitescan-d70-ultrasonic-flaw-detector.pdf
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Sitescan-d70-ultrasonic-flaw-detector.pdf as PDF for free.
More details
- Words: 385
- Pages: 1
[email protected] www.ashtead-technology.com
Sonatest Sitescan D20+ - Ultrasonic Flaw Detector
Key features ●
●
●
●
●
Available for rental/hire, the Sonatest Sitescan D20+ Ultrasonic Flaw Detector. Suitable for a number of NDT applications such as corrosion testing and weld inspection , the D20+ has been built to deliver high performance and is packed with advanced features that guide the user through their applications, allowing for faster, accurate and more efficient inspections.
Navigation – using a scroll wheel, you’re able to single handily navigate through a variety of functions/settings and adjust them based on your requirements. Design - the Sitescan D20+ has been designed with the user in mind, it’s compact and light making it suitable for day long use. Display - with a high resolution TFT VGS colour display, the Sitescan D20+ provides high visibility at any light level. Durability – with an IP67 rating, the Sitescan D20+ is protected from dust and against the effects of immersion in water to depth (between 15 cm and 1 meter). Software – using SDMS Lite, the Windows based software lets you import your findings into Microsoft Word or Microsoft Excel, allowing you to create reports, application notes and analysis charts for B&C scans.
Applications ● ●
Corrosion Testing Weld Inspection
Technical specification Test Range
-5mm (0.2in) up to 5000 mm (200 in.) in steel. Variable in sequence 10mm or 1mm.
Velocity
1000 - 9999 m/s
Probe Zero
0 to 999.999 μs
Delay
0-5000m at steel velocity in 0.05 steps (0-200 in 0.002 in. steps)
Gain
0 to 110dB in 0.5, 1, 2, 6, 10, 14 and 20dB steps.
Test Modes
Pulse echo and transmit/receive
Gate
Start & Width adjustable over full range. Amplitude 0-100%, 0.5% steps visual and audible alarms. Positive triggering.
Measurement Modes Depth
Depth and amplitude of first signal in gate.
Echo-Echo
Echo-to-Echo distance measurement. (single gate)
Trig
Trigonometric display of beam path, depth and surface distance.Calculation of skip depth and curved surface compensation, Xoffset for transducer.
T-Min
Holds minimum thickness in depth mode.
Pulser Voltage
Spike - 200 Volt peak amplitude, rise/fall time <10ns into 50 ohm. Fixed 20nS spike width.
P.R.F
Selectable 35 to 500 Hz, in 5Hz steps.
Display
Colour Transflective TFT: Display area 111.4 x 83.5 mm (4.39 x 3.29 in). A-Scan Area 315 x 200 pixels max sunlight viewable.
Dimensions
Sonatest Sitescan D20+ - Ultrasonic Flaw Detector
Key features ●
●
●
●
●
Available for rental/hire, the Sonatest Sitescan D20+ Ultrasonic Flaw Detector. Suitable for a number of NDT applications such as corrosion testing and weld inspection , the D20+ has been built to deliver high performance and is packed with advanced features that guide the user through their applications, allowing for faster, accurate and more efficient inspections.
Navigation – using a scroll wheel, you’re able to single handily navigate through a variety of functions/settings and adjust them based on your requirements. Design - the Sitescan D20+ has been designed with the user in mind, it’s compact and light making it suitable for day long use. Display - with a high resolution TFT VGS colour display, the Sitescan D20+ provides high visibility at any light level. Durability – with an IP67 rating, the Sitescan D20+ is protected from dust and against the effects of immersion in water to depth (between 15 cm and 1 meter). Software – using SDMS Lite, the Windows based software lets you import your findings into Microsoft Word or Microsoft Excel, allowing you to create reports, application notes and analysis charts for B&C scans.
Applications ● ●
Corrosion Testing Weld Inspection
Technical specification Test Range
-5mm (0.2in) up to 5000 mm (200 in.) in steel. Variable in sequence 10mm or 1mm.
Velocity
1000 - 9999 m/s
Probe Zero
0 to 999.999 μs
Delay
0-5000m at steel velocity in 0.05 steps (0-200 in 0.002 in. steps)
Gain
0 to 110dB in 0.5, 1, 2, 6, 10, 14 and 20dB steps.
Test Modes
Pulse echo and transmit/receive
Gate
Start & Width adjustable over full range. Amplitude 0-100%, 0.5% steps visual and audible alarms. Positive triggering.
Measurement Modes Depth
Depth and amplitude of first signal in gate.
Echo-Echo
Echo-to-Echo distance measurement. (single gate)
Trig
Trigonometric display of beam path, depth and surface distance.Calculation of skip depth and curved surface compensation, Xoffset for transducer.
T-Min
Holds minimum thickness in depth mode.
Pulser Voltage
Spike - 200 Volt peak amplitude, rise/fall time <10ns into 50 ohm. Fixed 20nS spike width.
P.R.F
Selectable 35 to 500 Hz, in 5Hz steps.
Display
Colour Transflective TFT: Display area 111.4 x 83.5 mm (4.39 x 3.29 in). A-Scan Area 315 x 200 pixels max sunlight viewable.
Dimensions
More Documents from "JC Schwartz"
Sitescan-d70-ultrasonic-flaw-detector.pdf
November 2019 0
