Signle Point Cutting Tool References.docx

Reference Reference books [1]HMT – “Production Technology”, Tata Mcgraw-Hill,1998. [2]P.N.Rao, ‘CAD/CAM Principles And Applications’,TATA Mc Craw Hill, 2007 [3]P.C. Sharma, “A Text Book of Production Engineering”,S. Chand And Co. Ltd, IV Edition, 1993. Reference Papers  Aknouche, A. Outahyon, C. Nouveau, R. Marchal, A. Zerizer, J.C. Butaud; “Tool wears effect on cuttingforces: In routing process of Aleppo pine wood; journalof materials processing technology,” 209, 2918 – 2922,2009.  M. Dogra*,a,V. S. Sharmab, J. Durejac; “Effect of toolgeometry variation on finish turning – A Review”, Journal of Engineering Science and Technology Review4 (1) (2011) 1-13, R eceived 4 October 2009; Revised 19 October 2010; Accepted 20 December 2010  H AOUICI1 MA YALLESE, A BELBAH MFAMEUR and M ELBAH ,“Experimentalinvestigation of cutting parameters influence on surface roughness and cutting forces in hard turning of X38CrMoV5-1 with CBN tool”, Sa ̄dhana ̄ Vol. 38,Part 3, June 2013, pp. 429–445._c Indian Academy of Sciences. 

Study Effect of HSS Single Point Cutting Tool Nose Radius on Cutting Edge Strength and Tool Wear inMachining of EN9Maheshwari Patil, Dr.R.J.Patil International Journal of Science and Research (IJSR)ISSN (Online): 2319-7064

 Effects of single point cutting tool materials on tool work interface and cutting performance using FEA- S Arun Prasath , Ankit Kumar , Hemanta Deka 2nd International conference on Advances in Mechanical Engineering (ICAME 2018) IOP Publishing IOP Conf. Series: Materials Science and Engineering 402 (2018) 012133  Experimental Observations of Cutting Forces on Single Point Cutting Tool with Different Rake Angle and Spindle Speed for Constant Depth of CutPradeep Kumar Patil - International Journal of Engineering Science Invention Research & Development; Vol. I Issue II August 2014

 T. Schermann, J. Marsolek 2006 Simulation Of A Cutting Process With Abaqus Including The Interaction Between The Cutting Process And The Dynamic Behavior Of The Machine Tool, CIRP International Workshop on Modeling of Machining Operation. 9, 163-170  Punit Kumar Rohilla 2017 Optimizing Machining Parameters Using Carbide Insert For Rough Mild Steel Surfaces, International Journal of Theoretical and Applied Mechanics. 12, 93-101  Ranganath. M. S, Vipin, Lalit Kumar and Jitender Kumar 2014 Surface Texture Analysis in Turning Of Mild Steel Using Carbide Inserts. International Journal of Advance Research and Innovation. 2, 601-606.  A. Poomari, B. Mohan and A. Rajadurai 2006 Machinability Of Ti-Al-N Coated Cermet Tool With The Ti[C, N] Mixed Alumina Ceramic Cutting Tool And The Uncoated Cermet Cutting  Tool While Machining Aisi D2 Steel. Journal of Metallurgical Engineering. 1, 63-75  X. Jiang, J. Philip and W. J. Zhanga 2003 Hardness and Young’s Modulus of High-Quality Cubic Boron Nitride Films Grown by Chemical Vapor Deposition, Journal of Applied Physics.  J. L. Andresen, L. De Chiffre 1993 Automatic Chip-Breaking Detection in Turning by Frequency Analysis of Cutting Force, CIRP Annals. 42, 45-48.  M. Aruna and V. Dhanalaksmi 1993 Design Optimization of Cutting Parameters When Turning Inconel 718 with Cermet Insert, International Journal of Mechanical and Mechatronics Engineering. 6, 278-281  Cornelius Johannes Pretorius 1997 Pcbn cutting tool components, Patent Number: 5,639,285.  Shunmugesh, Panneerselvam and Amal George 2014 Optimization of turning parameters with carbide tool for surface roughness analysis using response surface methodology, International Journal of Emerging Engineering Research and Technology. 3, 103-107