Senko Passive Devices Catalogue

passive devices CATALOGUE

090301_Passive Device.indd 1

11-03-2009 15:10:48

As a global partner of optical components, SENKO provides both standard and customized passive device products to the market. Our commitment to the stringent management of our supply chain and manufacturing partners enables us to consistently deliver the highest quality, lowest cost products to our customers.

090301_Passive Device.indd 2

SENKO offers an extensive range of product lines, including Fused Coupler, Filter-based WDM, Outside Plant use WDM, Polarization Maintaining Components, Switching and Routing, and other customized products are also available upon request.

SENKO works closely with the industry to constantly develop new products and techniques and makes customer satisfaction their top priority.

11-03-2009 15:10:50

Passive Device index pg. 04/09

Fused Products • Single Mode Fiber Coupler - 1×2 (All wavelength 50/50) • Single Mode Fiber Coupler - 1×2 (All coupling ratio) • Single Mode Fiber Coupler - 1×3

• Single Mode Fiber Coupler - 1×4 • Fused WDM - 1310/1550 • Fused WDM - 980/1550

pg. 10/14

PLC Group • 1×N PLC Splitter • 2×N PLC Splitter • PLC Splitter Module 900µm Type

• PLC Splitter Module 2mm/3mm Type • Mini Splitter Module

WDM Products • CWDM Single Device • CWDM 2CH/4CH/8CH/16CH Module • CWDM 2CH/4CH/8CH/16CH +1310ch Module • Mini Low Loss 4CH/8CH CWDM

pg. 15/22 • DWDM 100G/200G 4ch /8ch Module • FTTX FWDM – 1310~1490/1550 • Filter Based FWDM 1310/1550 with High Isolation • Grating DWDM Module

pg. 23/27

Switch/ Routing and Attenuator • 1x1 / 1x2/2X2/2X4 switch Series • 1x4/1x8 switch Module • Circulator • Isolator

• Manual VOA

pg. 28/33

PM products • PM Polarization Combiner/Splitter • PM Isolator • PM filter coupler

• PM Circulator • PM WDM • In-line Polarizer

Sub components /Special components

pg. 34

• Splice Protection Sleeve

090301_Passive Device.indd 3

11-03-2009 15:10:50

Fused Products

Single Mode Fiber Coupler 1X2 (50/50)

applications • Telecommunications • Network Monitoring • FTTX

FEATURES • • • •

High Stable & Reliable Perfect Performance Compact Package RoHS Compliant

Fused Products

SENKO’s Single Mode Fiber Couplers are highly stable for multi-port optical signal splitting with low insertion loss. All devices are tested according to industry standard test procedures and have the compact package size. Parameters

VALUES

Type Coupling Ratio Insertion loss Max.1,2 Uniformity Max. Return loss Min.2 Directivity Min. PDL Max. WDL Max.3 TDL at -5~70c Max.

1x2 50/50 See below Table See below Table 55 55 See below Table See below Table 0.15 250µm fiber 3.0 (Ф) x 54 (L) 900µm tube 3.0 (Ф) x 54 (L) 2mm/3mm tube, ABS Box: 90(L)x14(W)x8.5(H) 1.0m or specified SMF-28e 250µm bare fiber -40 ~ +85 -40 ~+85

Housing dimension Fiber length Min. Fiber Type 4 Operating temperature Storage temperature

UNIT

dB dB

dB mm

°C °C

Note: 1. The performance are not including the Connectors. 2. IL are worst case including PDL, TDL, and WDL. 3. WDL means IL change over Single wavelength band. Only for each window band, not including water peak band. 4. Other special fiber is available such as SMF28e XB.

4 Wind Wavelength Band (1260~1620 nm) 3 Wavelength Band (1310/ 1550 ±40 and 1490 ±10 nm) Dual Wavelength Band (1310/1550 ± 40 nm) Single Wavelength Band (1310±40 or 1550 ±40 nm)

CODE 1 2

PORT 1X2 2X2

PD-FC-SM

ORDER CODE example:

090301_Passive Device.indd 4

31 55 DU TR FU

WAVELENGTH 1310 1550 1310/1550 1310/1490/1550 full

IL (dB) Typ. / Max. 3.8 / 4.5 3.4 / 3.7 3.3 / 3.6 3.2 / 3.4

COUPLING RATIO 50 50/50

b 9 2 3

PDL (dB) Max. 0.3 0.2 0.15 0.15

FIBER TYPE 250µm 900µm 2mm 3mm

Uniformity (dB) Max. 1.2 0.8 0.7 0.6

0 1 2 3 4 5 6 7

CONNECTOR None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

WDL(dB) Max. NA 0.5 0.3 0.2

FIBER LENGTH 10 1.0m 15 1.5m

PD-FC-SM-1-31-55-9-1-10

11-03-2009 15:10:50

Fused Products

Single Mode Fiber Coupler 1X2 (ALL COUPLING RATIO)

applications • Telecommunications • Network Monitoring • FTTX

FEATURES • • • •

High Stable & Reliable Perfect Performance Compact Package RoHS Compliant

SENKO’s Single Mode Fiber Couplers are highly stable for multi-port optical signal splitting with low insertion loss. All devices are tested according to industry standard test procedures and have the compact package size. VALUES

Type Operating Wavelength band 1 Operating Wavelength band 2 Operating Wavelength band 3 Insertion loss Max.1,2 Return loss Min.1 Directivity Min. PDL Max. TDL at -5~70c Max.

1x2 Single Window—1310 or 1550±40 Dual Windows—1310 and 1550±40 Triple Windows—1310 and 1550±40 and 1490±10 See below Table 55 55 See below Table 0.15 250µm fiber 3.0 (Ф) x 54 (L) 900µm tube 3.0 (Ф) x 54 (L) 2mm/3mm tube, ABS Box: 90(L)x14(W)x8.5(H) 1.0m or specified SMF-28e 250µm bare fiber -40~ +85 -40 ~+85

Housing dimension Fiber length Min. Fiber Type 3 Operating temperature Storage temperature

Single Window

Coupling Ratio

IL (dB) ≤21.8/0.20 ≤19.0/0.25 ≤16.7/0.30 ≤14.5/0.45 ≤11.2/0.65 ≤7.80/1.25 ≤5.80/1.9 ≤4.50/2.60

1/99 2/98 3/97 5/95 10/90 20/80 30/70 40/60 CODE 1 2

PORT 1X2 2X2

PD-FC-SM

ORDER CODE example:

090301_Passive Device.indd 5

UNIT

31 55 DU TR

PDL (dB) ≤0.20/≤0.05 ≤0.20/≤0.05 ≤0.20/≤0.05 ≤0.20/≤0.10 ≤0.15/≤0.10 ≤0.15/≤0.15 ≤0.15/≤0.15 ≤0.15/≤0.15

WAVELENGTH 1310 1550 1310/1550 1310/1490/1550

nm nm nm dB dB dB mm

°C °C

Dual window IL (dB) ≤23.0/0.25 ≤19.0/0.30 ≤18.2/0.35 ≤15.0/0.45 ≤11.3/0.65 ≤7.85/1.25 ≤6.00/2.00 ≤4.70/2.70

COUPLING RATIO 1 1/99 2 2/98 3 3/97 5 5/95 10 10/90 20 20/80 30 30/70 40 40/60

b 9 2 3

Triple Window

PDL (dB) ≤0.20/≤0.05 ≤0.20/≤0.05 ≤0.20/≤0.05 ≤0.20/≤0.10 ≤0.15/≤0.10 ≤0.15/≤0.15 ≤0.15/≤0.15 ≤0.15/≤0.15

FIBER TYPE 250µm 900µm 2mm 3mm

Note: 1. The performance are not including the Connectors. 2. IL are worst case including PDL, TDL, and WDL. 3. Other special fiber is available such as SMF28e XB.

Fused Products

Parameters

0 1 2 3 4 5 6 7

IL (dB) ≤23.5/0.25 ≤19.2/0.35 ≤18.4/0.40 ≤15.2/0.50 ≤11.5/0.75 ≤7.95/1.50 ≤6.20/2.10 ≤4.90/2.80 CONNECTOR None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

PDL (dB) ≤0.20/≤0.05 ≤0.20/≤0.05 ≤0.20/≤0.05 ≤0.20/≤0.10 ≤0.15/≤0.10 ≤0.15/≤0.15 ≤0.15/≤0.15 ≤0.15/≤0.15

5

FIBER LENGTH 10 1.0m 15 1.5m

PD-FC-SM-1-55-1-2-1-15

11-03-2009 15:10:50

Fused Products

Single Mode Fiber Coupler 1X3

applications • Telecommunications • Network Monitoring • FTTX

FEATURES • • • • •

Single Fusion High Stable & Reliable Perfect Performance Compact Package RoHS Compliant

Fused Products

SENKO’s Single Mode Fiber Couplers are highly stable for multi-port optical signal splitting with low insertion loss. All devices are tested according to industry standard test procedures and have the compact package size. Parameters

VALUES

Type Coupling Ratio Insertion loss Max.1,2 Uniformity Max. Return loss Min.1 Directivity Min. PDL Max. WDL Max.3 TDL at -5~70c Max.

1x3 33.3/ 33.3/ 33.3 See below Table See below Table 55 55 See below Table See below Table 0.3 250µm fiber:3.0(Ф)x54(L) 900µm fiber:4.0(Ф)x75(L) 1.0m or specified SMF-28e 250µm bare fiber or with 900µm loose tube or with 2/3mm cable -40~+85 -40~+85

Housing dimension Fiber length Min. Fiber Type 4 Operating temperature Storage temperature

6 Wind Wavelength Band (1260~1620 nm) 3 Wavelength Band (1310/ 1550 ±40 and 1490 ±10 nm) Dual Wavelength Band (1310/1550 ±40 nm) Single Wavelength Band (1310 ±40 or 1550 ±40 nm)

CODE

PORT 1X3

PD-FC-SM

3

ORDER CODE example:

090301_Passive Device.indd 6

31 55 DU TR

WAVELENGTH 1310 1550 1310/1550 1310/1490/1550

UNIT

IL (dB) Typ. / Max. 6.6 / 7.0 6 / 6.6 5.8 / 6.2 5.3 / 5.7

COUPLING RATIO 33 33/33/33

b 9 2 3

PDL (dB) Max. 0.3 0.3 0.25 0.15

FIBER TYPE 250µm 900µm 2mm 3mm

Uniformity (dB) Max. 1.6 1.4 1.2 1.0

0 1 2 3 4 5 6 7

CONNECTOR None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

dB dB

dB mm mm

°C °C

Note: 1. The performance are not including the Connectors. 2. IL are worst case including PDL, TDL, and WDL. 3. WDL means IL change over Single wavelength band, only for each window band, not including water peak band. 4. Other special fiber is available such as SMF28e XB.

WDL(dB) Max. NA 0.5 0.3 0.25

FIBER LENGTH 10 1.0m 15 1.5m

PD-FC-SM-3-31-33-9-1-15

11-03-2009 15:10:51

Fused Products

Single Mode Fiber Coupler 1X4

applications • Telecommunications • Network Monitoring • FTTX

FEATURES • Single Fusion Compact Package • High Stable & Reliable • Perfect Performance • RoHS Compliant

Parameters

VALUES

Type Coupling Ratio Insertion loss Max.1,2 Uniformity Max. Return loss Min.1 Directivity Min. PDL Max. WDL Max.3 TDL at -5~70c Max.

1x4 25/25/25/25 See below Table See below Table 55 55 See below Table See below Table 0.3 250µm fiber:3.0(Ф)x54(L) 900µm fiber:4.0(Ф)x75(L) 1.0m or specified SMF-28e 250µm bare fiber or with 900µm loose tube or with 2/3mm cable -40~+85 -40~+85

Housing dimension Fiber length Min. Fiber Type 4 Operating temperature Storage temperature

UNIT

dB dB

dB mm

°C °C

Note: 1. The performance are not including the Connectors. 2. IL are worst case including PDL, TDL, and WDL. 3. WDL means IL change over Single wavelength band, only for each window band, not including water peak band. 4. Other special fiber is available such as SMF28e XB.

Fused Products

SENKO’s Single Mode Fiber Couplers are highly stable for multi-port optical signal splitting with low insertion loss. All devices are tested according to industry standard test procedures and have the compact package size.

7 Wind Wavelength Band (1260~1620 nm) 3 Wavelength Band (1310/ 1550 ±40 and 1490 ±10 nm) Dual Wavelength Band (1310/1550 ±40 nm) Single Wavelength Band (1310 ±40 or 1550 ±40 nm)

CODE

PORT 1X4

PD-FC-SM

4

ORDER CODE example:

090301_Passive Device.indd 7

31 55 DU TR

WAVELENGTH 1310 1550 1310/1550 1310/1490/1550

IL (dB) Typ. / Max. 7.0 / 8.0 6.8 / 7.5 6.6 / 7.4 6.5 / 7.2

COUPLING RATIO 25 25/25/25/25

b 9 2 3

PDL (dB) Max. 0.35 0.30 0.25 0.15

FIBER TYPE 250µm 900µm 2mm 3mm

Uniformity (dB) Max. 1.8 1.7 1.6 1.4

0 1 2 3 4 5 6 7

CONNECTOR None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

WDL(dB) Max. NA 0.6 0.4 0.3

FIBER LENGTH 10 1.0m 15 1.5m

PD-FC-SM-4-DU-25-3-0-15

11-03-2009 15:10:51

Fused Products

Fused WDM - 1310/1550

applications • Telecommunications • Local Area Networls

FEATURES

Fused Products

SENKO’s 1310/1550nm fused single-mode wavelength division multiplexers are manufactured using the proven fused biconical taper technology, this device is ideal for combining or separating optical signals in the 1310 and 1550nm bands. Parameters

VALUES

Type Operating Wavelength Insertion loss Max. Isolation Min. Return loss Min, Directivity Min, PDL Max. WDL Max. TDL at -5~70c Max. Housing dimension Fiber length Min. Fiber Type Operating temperature Storage temperature Maximum Power Handling

1x2 1295~1325 / 1535~1565 0.3 17 50 55 0.1 0.15 0.15 3.0 (Ф) x 54 (L) 1.0 ± 0.1 SMF-28e 250μm bare fiber -40~ +85 -40~ +85 500

• • • •

High Isolation Low Loss High Reliability RoHS Compliant

UNIT nm dB dB dB dB dB dB dB mm m °C °C mW

8

CODE B 9 PD SWDW-35

ORDER CODE example:

090301_Passive Device.indd 8

FIBER TYPE 250µm 900µm

0 1 2 3 4 5 6 7

CONNECTOR None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

10 15

FIBER LENGTH 1.0m 1.5m

PD-SWDM-35-B-1-10

11-03-2009 15:10:52

Fused Products

Fused WDM - 980/1550

applications • Telecommunications • Amplification • Local Area Networks

FEATURES • • • •

High Isolation Low Loss High Reliable RoHS Compliant

SENKO’s 980/1550nm fused single-mode wavelength division multiplexers are manufactured using the proven fused biconical taper technology, this device is ideal for combining or separating optical signals in the 980 and 1550nm bands in optical fiber amplifiers.

VALUES 970 ~990 / 1535 ~1565 0.2 20 50 55 0.1 3.0 (Ф) x 54 (L) 1.0 ± 0.1 Corning Hi 1060 Flex, or OFS BF05635-02 bare fiber -40~ +85 -40~ +85 500

unti nm dB dB dB dB dB mm m °C °C mW

Fused Products

Parameters Operating Wavelength Insertion loss Max. Isolation Min. Return loss Min, Directivity Min, PDL Max. Housing dimension Fiber length Min. Fiber Type Operating temperature Storage temperature Maximum Power Handling

9

CODE B 9 PD SWDM-59

ORDER CODE example:

090301_Passive Device.indd 9

FIBER TYPE 250µm 900µm

1 2

FIBER CORE NAME HI 1060 Flex OFS BF05635-02fiBer

0 1 2 3 4 5 6 7

CONNECTOR None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

10 15

FIBER LENGTH 1.0m 1.5m

PD-SWDM-59-B-1-0-10

11-03-2009 15:10:52



PLC Group

1xN PLC Splitter

applications • Telecom, datacom • Local Area Networks (LANs) • Cable TV (CATV) • Local Convergence points (LCP) • FTTX

FEATURES • Low insertion loss; • High maximum power tolerance; • Excellent splitting uniformity; • Broadband Operating wavelength; • Compact design; • Low polarization independent

PLC group

SENKO’s 1x N Planar Light wave Circuit (PLC) Splitters are based on the Plasma Chemical Vapor Deposition (P-CVD) technology and its patented fabrication process for providing stable optical character. SENKO’s 1 x N PLC Splitter features guaranteed performance specifications and high reliability that surpass Telcordia requirements and is tailored for different applications and markets.

10

PARAMETERS1 Operating Wavelength Insertion Loss, Max. Uniformity PDL, Max. Return Loss, Min. Operating Temp. Dimensions

CODE

PD-SAC

102 104 108 116 132

ORDER CODE example:

090301_Passive Device.indd 10

1X2

1x4

1x8

4.0 0.6 0.2

7.4 0.6 0.2

10.7 0.8 0.3

4 (W)x4 (H)x40(L)

PORT 1X2 1X4 1X8 1X16 1X32

F B

1x16

1x32

1260 ~1650 13.7 16.9 1.2 1.7 0.3 0.3 55 -40 ~ +85 7 (W)x4 (H)x50(L)

FIBER TYPE 250µm individual bare fiber 250µm bare ribbon

0

CONNECTOR None

1x 64

UNIT

21 2.5 0.4

12(W)x4(H) x60 (L)

10 12 15

nm dB dB dB dB °C mm

Options • They are available in 1x4, 8, 16, 32 and 64 configurations, with various connector options. • Custom packaging is also available

Note: 1. Value of parameters shows at room temperature, 1310 and 1550 nm. 2. Custom specification is also available.

FIBER LENGTH 1.0m 1.2m 1.5m

PD-SAC-116-B-0-10

11-03-2009 15:10:53



PLC Group

2xN PLC Splitter

applications • Telecom, datacom • Local Area Networks (LANs) • Cable TV (CATV) • Local Convergence points (LCP) • FTTX

FEATURES • Low insertion loss; • High maximum power tolerance; • Excellent splitting uniformity; • Broadband Operating wavelength • Compact design; • Low polarization independent

PARAMETERS1 Operating Wavelength Insertion Loss, Max. Uniformity PDL, Max. Return Loss, Min. Operating Temp. Dimensions

CODE

PD-SAC

202 204 208 216 232

ORDER CODE example:

090301_Passive Device.indd 11

2X2

2x4

4.4 0.8 0.2

7.8 1.5 0.2

2x8 1260~1650 11.4 1.5 0.4 55 -40~ +85

2x16

2x32

14.9 2.0 0.4

18.0 2.5 0.4

4 (W)x4 (H)x50 (L)

PORT 2X2 2X4 2X8 2X16 2X32

F B

FIBER TYPE 250µm individual bare fiber 250µm bare ribbon

7 (W)x4 (H)x60 (L)

0

CONNECTOR None

10 12 15

unit nm dB dB dB dB °C mm

Options They are available in 2x4, 8, 16, and 32 configurations, with various connector options. Custom packaging is also available

Note: 1. Value of parameters shows at room temperature,1310 and 1550nm. 2. Custom specification is also available.

PLC group

SENKO’s 2x N Planar Light wave Circuit (PLC) Splitters are based on the Plasma Chemical Vapor Deposition (P-CVD) technology and its patented fabrication process for providing stable optical character. SENKO’s 1 x N PLC Splitter features guaranteed performance specifications and high reliability that surpass Telcordia requirements and is tailored for different applications and markets.

11

FIBER LENGTH 1.0m 1.2m 1.5m

PD-SAC-216-B-0-10

11-03-2009 15:10:53



PLC Group

PLC Splitter Module 900µm Type (Compact)

applications • Telecom, datacom • Local Area Networks (LANs) • Cable TV (CATV) • Local Convergence points (LCP) • FTTX

FEATURES • Compact package • Stable optical character • Broadband operating wavelength • Low insertion loss • Low back reflection • Excellent output uniformity

PLC group

Options

12

SENKO’s Planar Light wave Circuit (PLC) Splitter Modules allows system equipment manufacturers to reduce costs and shorten time to market. High quality, reliable components are assembled at a dedicated custom module manufacturing facility. PARAMETERS 2,3

1x4

Optical Fiber Operating Wavelength Insertion Loss, Max.1 Uniformity, Max. PDL, Max. Return Loss, Min.1 Fiber Type Operating Temp.4 Dimensions

CODE

PD-SAC

104 108 116 132 204 208 216 232

ORDER CODE example:

090301_Passive Device.indd 12

1x8

8.0 0.9 0.2

PORT 1X4 1X8 1X16 1X32 2X4 2X8 2X16 2X32

1x16

SMF – 28 equivalent 1260 ~1650 11.3 14.3 1.1 1.5 0.3 0.3 UPC:50, APC: 55 Input/output: 900µm loose tube -40~+85 40 (W) x 14 (H) x 90 (L)

9

FIBER TYPE 900µm loose tube

0 1 2 3 4 5 6 7

CONNECTOR None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

1x32

unit

17.6 2.0 0.3

nm dB dB dB dB °C mm

10 15

They are available in 1x4, 8, 16, and 32 configurations, with various connector options. 2 x N series is available upon request. Custom packaging is also available

Note: 1. IL and RL are included connector’s performance. 2. Value of specification shows at room temperature, 1310 and 1550nm. 3. Custom specification is also available. 4. Operating temperature is guaranteed up to 1m 900um loose tube long.

FIBER LENGTH 1.0m 1.5m

PD-SAC-132-9-1-10

11-03-2009 15:10:54



PLC Group

PLC Splitter Module 2mm/3mm Type (Compact)

applications • Telecom, datacom • Local Area Networks (LANs) • Cable TV (CATV) • Local Convergence points (LCP) • FTTX

FEATURES • Compact package • Stable optical character • Broadband operating wavelength • Low insertion loss • Low back reflection • Excellent output uniformity

PARAMETERS 2,3

1x4

Optical Fiber Operating Wavelength Insertion Loss, Max.1 Uniformity, Max. PDL, Max. Return Loss, Min.1 Cable Type Operating Temp.4 Dimensions

CODE

PD-SAC

104 108 116 132 204 208 216 232

ORDER CODE example:

090301_Passive Device.indd 13

1x8

8.0 dB 0.9 dB 0.2 dB

PORT 1X4 1X8 1X16 1X32 2X4 2X8 2X16 2X32

1x16

SMF – 28 equivalent 1260 nm ~1650 11.3 dB ≤14.3 dB 1.1 dB ≤1.5 dB 0.3 dB ≤0.3 dB UPC: 50, APC:55 Input/output:2mm/3mm Cable -40~+85 65mm (W) x 10mm (H) x 100 mm (L)

2 3

FIBER TYPE 2mm cable 3mm cable

0 1 2 3 4 5 6 7

CONNECTOR None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

1x32

UNIT

≤17.6 ≤2.0 dB ≤0.3 dB

nm dB dB dB dB °C

10 15

FIBER LENGTH 1.0m 1.5m

OPTIONS • They are available in 1x4 , 8.16 and 32 configurations with various connector options • 2xN Series is available upon request • Custom packaging is also available Broadband operating wavelength • Low insertion loss • Low back reflection • Excellent output uniformity

PLC group

SENKO’s Planar Light wave Circuit (PLC) Splitter Modules allows system equipment manufacturers to reduce costs and shorten time to market. High quality, reliable components are assembled at a dedicated custom module manufacturing facility.

13

Note: 1. IL and RL are included connector’s performance. 2. Value of specification shows at room temperature, 1310 and 1550nm. 3. Custom specification is also available. 4. Operating temperature is guaranteed up to 1m cable length.

PD-SAC-132-2-2-15

11-03-2009 15:10:56



PLC Group

PLC Splitter Module 900µm Type (Micro)

applications • Telecom, datacom • Local Area Networks (LANs) • Cable TV (CATV) • Local Convergence points (LCP) • FTTX

FEATURES

PLC group

• Super Compact package • Stable optical character • Broadband operating wavelength • Low insertion loss • Low back reflection • Excellent output uniformity

14

SENKO’s Mini Planar Light wave Circuit (PLC) Splitter Modules allows system equipment manufacturers to reduce costs and shorten time to market. The super compact package size saves a lot of plate space for customer, and high quality, reliable components are assembled at a dedicated custom module manufacturing facility. PARAMETERS2,3

1x4

Optical Fiber Operating Wavelength Insertion Loss, Max.1 Uniformity, Max. PDL, Max. Return Loss, Min.1 Fiber Type 5 Operating Temp.4

1x8

SMF – 28 equivalent 1260 ~1650 11.3 14.3 1.1 1.5 0.3 0.3 UPC: 50, APC: 55 Input/output: 900µm loose tube -20~+85 1x4/1x8:10(W)x6(H)X60(L) 1X16:10(W)X8(H)X60(L) 1X32:14(W)X8(H)X70(L)

8.0 0.9 0.2

Dimensions

CODE

PD-SAC-M

104 108 116 132 204 208 216 232

ORDER CODE example:

090301_Passive Device.indd 14

PORT 1X4 1X8 1X16 1X32 2X4 2X8 2X16 2X32

1x16

9 2 3

FIBER TYPE 900µm loose tube 2mm cable 3mm cable

0 1 2 3 4 5 6 7

CONNECTOR None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

1x32

unit

17.6 2.0 0.3

nm dB dB dB dB °C mm

10 15

FIBER LENGTH 1.0m 1.5m

Note: 1. IL and RL are included connector’s performance. 2. Value of specification shows at room temperature, 1310 and 1550nm. 3. Custom specification is also available. 4. Operating temperature is guaranteed up to 1m tube/cable length. 5. 2mm/3mm cable is also available, please confirm with Senko sales representative.

PD-SAC-M-104-2-1-15

11-03-2009 15:11:01

WDM Products

CWDM Single Device

applications • WDM system • Metro Network • Local Network

FEATURES • • • •

High Isolation Low Loss High Reliability RoHS Compliant

SENKO’s Coarse Wavelength Division Multiplexer Device (CWDM) is based on Thin-Film-Filter and Micro-Optics to achieve wide passband, low insertion loss, high channel isolation and excellent environmental stability. Operating Wavelength

1

Signal CWDM Center Wavelength, λc Channel Spacing for CWDM Channel Bandwidth Insertion Loss Isolation PDL Ripple in channel passband PMD Optical Power Directivity Return Loss Operating Temperature Storage Temperature Operating RH Storage RH Fiber Length Fiber Type Connectors (All Ports) Dimensions CHANNEL NUMBERS 1 1ch

PD-CWDM

CODE

ORDER CODE example:

090301_Passive Device.indd 15

@ −0.5 dB @ Pass Port @ Reflection Port Adjacent Channel Non-adjacent Channel Reflection Port @λc±6.5

Inside Box

START WAVELENGTH 47 1470 49 1490 51 1510 53 1530 55 1550 57 1570 59 1590

B 9

VALUE

UNIT

1260 ~1620 Ch1: 1470; Ch2: 1490; Ch3: 1510; Ch4: 1530; Ch5: 1550; Ch6: 1570; Ch7: 1590; Ch8: 1610; Channel number can be decided when ordering 20 ≥13 0.6 0.5 30 40 13 0.2 0.4 0.1 500 50 50 -5~+70 -40~+85 5%~95% 5%~100% 1± 0.1 SMF-28e, 250 μm Bare Fiber None 5.5(Ф)X34(L)

nm

FIBER TYPE 250um bare fiber 900µm

0 1 2 3 4 5 6 7

CONNECTOR None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

nm nm nm dB dB dB dB dB dB dB ps mW dB dB °C °C

Note: 1. Reflection wavelength involves OSC-1310 channel, also it can be upgraded to 16ch.

WDM PRODUCTS

Parameters

15

m

mm

10 15

FIBER LENGTH 1.0m 1.5m

PD-CWDM-1-47-3-1-10

11-03-2009 15:11:01

WDM Products

CWDM 2ch/4ch/8ch/16ch Module

applications • WDM system • Metro Network • Local Network

FEATURES • • • •

High Isolation Low Loss High Reliability RoHS Compliant

SENKO’s Coarse Wavelength Division Multiplexer (CWDM) Module is based on Thin-Film-Filter and Micro-Optics, Note: this product features wide passband, low insertion loss and high channel isolation, high stability and reliability. 1. The tested performances Parameters 1 Operation Wavelength Center Wavelength, λc Channel Numbers Channel Spacing Passband Bandwidth @-0.5dB 2CH 4CH 8CH 16CH

WDM PRODUCTS

IL @ Pass Band

16

Pass Band Ripple Adjacent Channel Non-Adjacent Channel

Isolation(Demux) Return Loss Directivity PMD PDL Fiber Type Fiber Length Connector Package Dimension Operating Temperature 2 Storage Temperature

PD-CWDM

CODE

CHANNEL NUMBERS 2 4 8 16

2ch 4ch 8ch 16ch

ORDER CODE example:

090301_Passive Device.indd 16

START WAVELENGTH 27 ... 51 53 55 57 59 61

1270 ... 1510 1530 1550 1570 1590 1610

VALUE

UNIT

1260 ~1620 1270, 1290... 1470, 1490... 1570, 1590, 1610 or specified channel 2, 4 or 8, 16 or specified 20 λc ± 6.5 ≤1.0 ≤1.5 ≤3.0 ≤4.5 ≤0.5 ≥30 ≥40 ≥50 ≥50 ≤0.2 ≤0.2 SMF 28e 250μm fiber with 900μm loose tube 1 ± 0.1 None or specified Metal Box:60 (W)× 12(H) × 80 (L) ABS Plastic Box1:80 (W)× 10(H) × 100(L) ABS Plastic Box2: 96 (W)× 14.5(H) × 125(L) 0~+ 70 -40~+85

nm nm

END WAVELENGTH 27 ... 51 53 55 57 59 61

1270 ... 1510 1530 1550 1570 1590 1610

FIBER TYPE

CONNECTOR

9 2 3

0 1 2 3 4 5 6 7

900μm 2mm 3mm

None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

nm nm dB dB dB dB dB dB dB dB dB ps dB m mm °C °C

FIBER LENGTH 10 15

1.0m 1.5m

do no include connectors. 2. Operating temperature is guaranteed up to 1m tube/cable length.

BOX 1 2 3

Metal Box ABS box1 ABS box2

PD-CWDM-4-47-53-9-1-10-2

11-03-2009 15:11:04

WDM Products

CWDM 2ch/4ch/8ch/16ch + 1310ch Module

applications • WDM system • Metro Network • Local Network

FEATURES

SENKO’s Coarse Wavelength Division Multiplexer Module (CWDM) with 1310ch(OSC) is based on Thin-Film-Filter and MicroOptics, this product features wide passband, low insertion loss and high channel isolation, high stability and reliability. Parameters 1 Operation Wavelength Center Wavelength, λc Osc channel Channel Numbers Channel Spacing Passband Bandwidth @-0.5dB IL (Com-1310ch) 2CH 4CH 8CH

IL (Com- CWDM@ Pass Band) Pass Band Ripple

Adjacent Channel Non-Adjacent Channel

Isolation(Demux) Return Loss Directivity PMD PDL Fiber Type Fiber Length Connector Package Dimension 2 Operating Temperature Storage Temperature

PD-CWDM3

CODE

CHANNEL NUMBERS 2 4 8

2ch 4ch 8ch

ORDER CODE example:

090301_Passive Device.indd 17

START WAVELENGTH 47 49 51 53 55 57 59 61

1470 1490 1510 1530 1550 1570 1590 1610

VALUE

unit

1260 ~1620 1470, 1490, 1510, 1530, 1550,1570, 1590, 1610 or specified channel 1260~1360 2, 4 or 8 or specified 20 λc ± 6.5 ≤0.8 ≤1.3 ≤1.8 ≤3.3 ≤0.5 ≥30 ≥40 ≥50 ≥50 ≤0.2 ≤0.2 SMF 28e 250μm fiber with 900μm loose tube 1 ± 0.1 None or specified Metal Box:60 (W)× 12(H) × 80 (L) ABS Plastic Box1:80 (W)× 10(H) × 100(L) ABS Plastic Box2: 96 (W)× 14.5(H) × 125(L) -40~+85 -40~+85

nm nm nm

END WAVELENGTH 47 49 51 53 55 57 59 61

1470 1490 1510 1530 1550 1570 1590 1610

FIBER TYPE

CONNECTOR

9 2 3

0 1 2 3 4 5 6 7

900μm 2mm 3mm

None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

nm nm dB dB dB dB dB dB dB dB dB ps dB

1.0m 1.5m

Note: 1. The tested performances do no include connectors. 2. Customized Smaller packaging box is available to use bend insensitive fiber. 3. Operating temperature is guaranteed up to 1m tube/cable length.

17

m mm °C °C

FIBER LENGTH 10 15

High Isolation Low Loss High Reliability RoHS Compliant

WDM PRODUCTS

• • • •

BOX 1 2

Metal Box ABS box

PD-CWDM3-4-47-53-9-15-1

11-03-2009 15:11:05

WDM Products

Mini Low Loss 4CH/8CH CWDM

applications • WDM system • Metro Network • Local Network

FEATURES • • • •

Small Form Ultra Low Loss High Reliability RoHS Compliant

SENKO’s Mini Low Loss Coarse Wavelength Division Multiplexer (CWDM) is based on Thin-Film-Filter and Micro-Optics, this product features small form, ultra low loss and high channel isolation. This technology is a lead-free packaging platform with high reliability.

WDM PRODUCTS

Parameters

18

Operation Wavelength Center Wavelength, λc Channel Numbers Channel Spacing Passband Bandwidth @-0.5dB 1310ch Bandwidth 4CH CWDM 8CH CWDM 1310CH 2

IL @ Pass Band Pass Band Ripple

Adjacent Channel Non-Adjacent Channel Com-1310 @ CWDM CH

Isolation Return Loss Directivity PMD PDL Fiber Type Fiber Length Connector Package Dimension Operating Temperature Storage Temperature

PD-MLLC

CODE

ChanneL 4 8 5 9

4ch 8ch 4ch CWDM+1310ch 8ch CWDM+1310ch

ORDER CODE example:

090301_Passive Device.indd 18

VALUE

unit

1260 ~1620 1470, 1490, 1510, 1530, 1550,1570, 1590, 1610 4 or 8 20 λc ± 6.5 1310 ± 50 ≤1.0 ≤1.5 ≤1.0 ≤0.5 ≥30 ≥40 ≥30 ≥50 ≥50 ≤0.2 ≤0.2 SMF 28e 250µm fiber with 900µm loose tube 1 ± 0.1 None or Specified 30(W)× 9.6(H) × 58(L) 0~+70 -40~+85

nm nm

FIBER TYPE B 9

250μm Bare fiber 900μm

CONNECTOR 0 1

None SC/UPC

nm nm nm dB dB dB dB dB dB dB dB dB ps dB

Note: 1. The tested performances do no include connectors. 2. 1310ch is also available packaged into the module.

m mm °C °C

FIBER LENGTH 10 15

1.0m 1.5m

PD-MLLC-8-B-1-10

11-03-2009 15:11:07

WDM Products

DWDM 100g/200g 4ch/8ch Module

applications • WDM system • Metro Network • Local Network

FEATURES • • • •

High Isolation Low Loss High Reliability RoHS Compliant

SENKO’s 4/8CH Dense Wavelength Division Multiplexer (DWDM) is based on Thin-Film-Filter and Micro-Optics, this product features wide passband, low insertion loss and high channel isolation, high stability and reliability. VALUE

Type Operating Wavelength

Center Wavelength, λc

Passband Bandwidth @-0.5dB (100G) Passband Bandwidth @-0.5dB (200G) Insertion Loss (4CH) Insertion Loss (8CH) Isolation (Demux) Passband Ripple PDL Return Loss Directivity Operating Temperature Storage Temperature Fiber Type Fiber Length

Com – Channels Com – Upgrade Com – Channels Com – Upgrade Adjacent Channel Non-Adjacent Channel Com – Upgrade

CHANNEL NUMBERS

START WAVELENGTH

End WAVELENGTH

1 2

2 4 8 16

C21 H21 C22 …

C21 H21 C22 …

PD-DWDM

Channel Spacing 100G 200G

ORDER CODE example:

090301_Passive Device.indd 19

2ch 4ch 8ch 16ch

ITU C21 ITU H21 ITU C22 …

ITU C21 ITU H21 ITU C22 …

nm

nm

nm nm dB dB dB dB dB

40

FIBER TYPE

CONNECTOR

9 2 3

0 1 2 3 4 5 6 7

900um 2mm 3mm

Note: 1. The parameters are not including connector performance. 2. Customized Smaller packaging box is available to use bend insensitive fiber.

dB

12 dB 0.5 dB 0.15 dB 45 dB 50 dB 0~+70 °C -40~+85 °C Corning SMF-28e 250um bare fiber, 900um loose tube 1±0.1 m Metal box: (L)80 × (W)60 × (H)12 mm ABS box: (L)100 × (W)80 × (H)10

Package Dimension 2

CODE

Unit

100G/200G DWDM 1521~1564 4ch ITU Options in C band: CH20: 1561.42 CH21: 1560.61 … CH59: 1530.33 CH60: 1529.55 Ch number will be specified when ordering λc ± 0.11 λc ± 0.25 1.8 1.6 3.3 3.0 28

WDM PRODUCTS

Parameters 1

None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

FIBER LENGTH 10 15

1.0m 1.5m

19

BOX 1 2

Metal Box ABS Box

PD-DWDM-1-8-C21-C28-9-1-10-1

11-03-2009 15:11:09

WDM Products

FTTX FWDM -1310~1490/1550

applications • WDM system • For Metro Market • FTTX

FEATURES • • • •

Low Insertion Loss High Channel Iso Lation Highly Stable & Reliate Rohs Compliant

SENKO’s 1310/1490/1550 FTTX MWDM is based on filter based platform for optical device. This multiplexer features ultra low loss, high isolation, and high reliability.

WDM PRODUCTS

Parameters

20

Pass Channel Wavelength Range, λP Reflection Channel Wavelength Range, λR Com-Pass Insertion Loss Com-Reflection Com-Pass @λR Isolation Com-Reflection @λP Return Loss Directivity PDL Fiber Type Fiber Length Fiber Color Connector Package Dimension Operating Temperature Storage Temperature

CODE

PD-FWDM-FTTX

ORDER CODE example:

090301_Passive Device.indd 20

B 9 2 3

FIBER TYPE 250μm 900μm 2mm 3mm

VALUE

unit

1550 ~1560 1260 ~1360 and 1480 ~1500 ≤1.0 ≤1.0 ≥40 ≥30 ≥50 ≥50 ≤0.2 SMF-28e, 250μm bare fiber 1 ± 0.1 Com port: Black; Pass port: Nature ; Ref. port: Nature None 5.5mm(φ) x 34(L) -40~+85 -40~+85

nm nm dB dB dB dB dB dB dB

0 1 2 3 4 5 6 7

CONNECTOR None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

10 15

m

mm °C °C

FIBER LENGTH 1.0m 1.5m

PD-FWDM-FTTX-B-1-10

11-03-2009 15:11:09

WDM Products

Filter Based FWDM 1310/1550

applications • Bi-Directional WDM system • Metro Network • CATV • FTTX

FEATURES

Parameters Pass Channel Wavelength Range, λP Reflection Channel Wavelength Range, λR Com-Pass Insertion Loss Com-Reflection Com-Pass @ λR Isolation (STD) Com-Reflection @λP Com-Pass @ λR Isolation (High Isolation) Com-Reflection @ λP Return Loss Directivity PDL WDL Fiber Type Fiber Length Package Dimension Operating Temperature Storage Temperature CODE S H

ISOLATION LEVEL standard High Isolation

PD-FWDM-35

ORDER CODE example:

090301_Passive Device.indd 21

B 9 2 3

FIBER TYPE 250um bare fire 900μm 2mm 3mm

VALUE

UNIT

1535~1565 1295~1325 ≤0.8 ≤0.8 ≥30 ≥20 ≥45 ≥45 ≥50 ≥50 ≤0.15 ≤0.3 SMF-28e, 250µm bare fiber 1± 0.1 5.5 mm(φ) x (L) 34 -40~+85 -40~+85

nm nm dB dB dB dB dB dB dB dB dB dB

0 1 2 3 4 5 6 7

CONNECTOR None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

WDM PRODUCTS

SENKO’s Wavelength Division Multiplexer (WDM) is based on thin-film filter technology, and has two types of standard isolation and high isolation. This component us used to combine or separate 1310 and 1550nm band signal. This product is ideal for high-power Optical Amplification Systems and WDM Network applications.

• Wide Operating Wavelength Range • Low Insertion Loss • High Channel Isolation • Highly Stable & Reliable • RoHS Compliant

21

m mm °C °C

10 15

FIBER LENGTH 1.0m 1.5m

PD-FWDM-35-H-B-0-10

11-03-2009 15:11:10

WDM Products

Greating DWDM Module

applications • MSO/CATV • DWDM systems

FEATURES • Athermal/Passive • Low Insertion Loss • Good Temperature Stability

SENKO’s Grating Multi-channel DWDM features low insertion loss, flat filter profile, good channel uniformity, and wide temperature stability(-40~85°C). Parameters 1

VALUE

Type Operating Wavelength

WDM PRODUCTS

Center Wavelength, λc

Passband Bandwidth @-0.5dB (100G) Passband Bandwidth @-0.5dB (200G)

22

Channel IL Uniformity PDL Return Loss Directivity Operating Temperature Storage Temperature Fiber Type Fiber Length

Insertion Loss (20CH) Insertion Loss (40CH) Isolation (Demux)

100G 200G

Connectors

PD-DWDM-G

CODE

Typical max Typical max Adjacent Channle Non-Adjacent Channel

CHANNEL Spacing CHANNEL NUMBERS START WAVELENGTH 1 100G 8 8ch C21 ITU C21 2 200G 16 16ch H21 ITU H21 40 40ch C22 ITU C22 … …

ORDER CODE example:

090301_Passive Device.indd 22

Unit

100G/200G DWDM 1521~1564 ITU Options in C band: CH20: 1561.42 CH21: 1560.61 … CH59: 1530.33 CH60: 1529.55 Ch number will be specified when ordering λc ± 0.11 λc ± 0.25 3.0 4.0 3.0 4.0 25 37 1.0 0.4 40 50 -40~+85 -40~+85 Corning SMF-28e 250um bare fiber, 900um loose tube 1±0.1 200.32(L)X106.7(W)X20.4(H) 200.32(L)X96.52(W)X43.18(H) None or Specified

FIBER TYPE 9 900μm 2 2mm 3 3mm

0 1 2 3 4 5 6 7

CONNECTOR None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

nm

Note: 1. The parameters are not including connector performance.

nm

nm nm dB dB dB dB dB dB dB dB dB dB °C °C m

FIBER LENGTH 10 1.0m 15 1.5m

PD-DWDM-G-1-8-C21-9-0-10

11-03-2009 15:11:11

Switch/Routing and Attenuator 1x1/1x2/2x2/2x4 series

applications • Optical Network Protection and Storage • Network Switching • Reconfigurable Add/ Drop Multiplexers • Instrumentation and Testing, Measurement

FEATURES

Senko’s Optical Switch 1x1/1x2/2x2/2x4 series are based on Opto-mechanical technology with high reliable quality. These switches are designed for optical Multiplexers, cross-connect and network switching for fault/ protection applications. Value

Types

1x1 / 1x2 / 2x2 /2x4(Dual 1x2) 1260~1360 or/and 1500~1600 Single Window Dual Windows 1x1, 1x2 2x2, 2x4 1x1, 1x2 2x2, 2x4 <0.6 <0.7 <0.8 <0.8 <0.8 <1.0 <1.0 <1.0 <0.15 <0.2 <0.2 <0.3 <0.2 <0.1 <±0.05 >60 >45 <5 >300 107 4.5~5.5 0.2 1x1, 1x2—8.8x11x30 Mini 1x1, 1x2—7x11x22.6 2x2—8.9x18x39.5 2x4—8.2x11x30 Latch or Non-latch is optional SMF-28e 250μm fiber or 0.9mm loose tube MM fiber is also optional 0~+70

Wavelength Switch type Insertion Loss Typical Insertion Loss Max. Wavelength Dependent Loss (each window) Temperature Dependent Loss PDL Repeatability Cross Talk Return Loss Switching Time Optical Power Handing Durability (Cycles) Operating Voltage range Power Consumption Typ. Dimension (H x W x L) Switch Status Option Fiber Type Operating temperature Fiber Mode

TYPE

WAVELENGTH

S

SM

11

1x1

3

1310 nm

L

latch

M

MM

12 M1 M2 22 24

1x2 Mini 1x2 Mini 1x2 2x2 2x4

5 D

1550 nm Dual Windows

N

Non-latch

PD-FOSW

CODE

ORDER CODE example:

090301_Passive Device.indd 23

Unit

FIBER TYPE 250μm B Bare fiber 9 900μm 2 2mm 3 3mm

Note: 1. The parameters are not including connector performance.

nm

dB dB dB dB dB dB dB dB ms mW V mW

Switch / routing And attenuator

Parameters 1

• Compact Size • Low Insertion Loss • Fully compliant with Telcordia GR-1221 and GR-1073 • RoHs Compliance

23

mm

°C

CONNECTOR

FIBER LENGTH

0

None

10

1.0m

1 2 3 4 5 6 7

SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

15

1.5m

PD-FOSW-S-11-5-N-2-0-10

11-03-2009 15:11:12

Switch/Routing and Attenuator 1 x4/1x8 switch Module

applications • Optical Network Protection and Storage • Network Switching • Instrumentation and Testing, Measurement

FEATURES

Switch / routing And attenuator

• Low Insertion Loss • Fully compliant with Telcordia GR-1221 and GR-1073 • RoHs Compliance

24

Senko’s 1X4/1x8 Optical Switch series are based on Opto-mechanical technology with high reliable quality. These switches are designed for optical Multiplexers, cross-connect and network switching for fault/protection applications. Parameters 1

Value

Types Wavelength

SW

Insertion Loss Typical Insertion Loss Wavelength Dependent Loss (each window) Temperature Dependent Loss PDL Repeatability Cross Talk Return Loss Switching Time Optical Power Handing Durability (Cycles) Dimension Weight

<1.2 <1.5

TYPE

WAVELENGTH

SM

18

1x8

3

1310

L

latch

M

MM

14

1x4

5 D

1550 Dual Windows

N

Non-latch

PD-FOSW

S

ORDER CODE example:

090301_Passive Device.indd 24

1X8

DW

nm dB dB dB dB dB dB dB dB ms mW

<1.6 <2.0

<0.35 <0.3 <0.2 <±0.1 >60 >45 <10 >300 107 18x100x100 <400 SMF-28e 250μm fiber or 0.9mm loose tube MM fiber is also optional 0~+70

Operating temperature Fiber Mode

DW SW 1260~1360 or/and 1500~1600 <1.3 <1.5 <1.6 <1.8

<0.3

Fiber Type

CODE

1X4/1x8

1X4

Unit

FIBER TYPE 250μm B bare fiber 9 900μm 2 2mm 3 3mm

Note: 1. The parameters are not including connector performance.

mm g °C

CONNECTOR

FIBER LENGTH

0

None

10

1.0M

1 2 3 4 5 6 7

SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

15

1.5M

PD -FOSW-M-18-3-L-2-0-15

11-03-2009 15:11:14

Switch/Routing and Attenuator

Circulator

applications • Optical Amplifiers • FBG Applications • Dispersion Compensation • Fiber Sensors

FEATURES

Parameters

VALUE

Operating Wavelength Insertion Loss (1310, or C-band) 1 Insertion Loss (C+L band) 1 Isolation (2°1,3°2) - for (1310, or C-band) Isolation (2°1,3°2) - for (C+L band) Directivity (1°3) Return Loss PDL (1310, or C-band) PDL (C+L band) Operating Temperature Storage Temperature Fiber Type Fiber Length Package Dimension Connectors

CODE 3 5

WAVELENGTH 1310 1550

PD-FOCI

ORDER CODE example:

090301_Passive Device.indd 25

Unit

1310 band: 1290~1330 or C-band: 1525~1565 or C+L band: 1525~1610 0.5~0.8 0.7~0.9 38~45 32~40 > 50 > 45 < 0.1 < 0.2 0~+70 -40~+85 Corning SMF-28e 250μm bare fiber or 900μm loose tube 1±0.1 (OD)5.5 x (L)38 None

B 9

FIBER TYPE 250μm Bare fiber 900μm

0 1 2 3 4 5 6 7

CONNECTOR None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

nm dB dB dB dB dB dB dB dB °C °C m mm

Note: 1. Insertion loss values include WDL, TDL.

Switch / routing And attenuator

Senko’s Mini Fiber Optical Circulator features compact size, high performance over wide wavelength band, which the component can transmits the incoming signal from port1 to port2, and another incoming signal from port2 to port3. It’s widely used in combination with fiber gratings and other reflective components in DWDM systems, and bi-directional communication systems.

• Low Insertion Loss & PDL • High Channel Isolation • Optical Path Epoxy Free • Telcordia Compliant

25

10 15

FIBER LENGTH 1.0M 1.5M

PD-FOCI-3-B-0-15

11-03-2009 15:11:15

Switch/Routing and Attenuator

Isolator

applications • Fiber Optic Lasers • Optical Transmitters & Transceivers • Fiber Amplifiers • Fiber Sensors

FEATURES

Switch / routing And attenuator

• High Isolation • Low Insertion Loss • Large Aperture Features

26

Senko Polarization Insensitive Isolator is a compact, high performance component with low insertion, high isolation. It’s ideal for amplifiers, fiber laser, and other fiber optic communication equipments to suppress back reflection and back scattering. Parameters 1

Value

Stage Center Wavelength (λc) Operating Wavelength Range Typ. Peak Isolation Min. Isolation at 23°C Typ. Insertion Loss at 23°C Max. Insertion Loss at -5°C -70°C Min. Return Loss (Input/Output) Max. PDL Max. Optical Power (CW) Max. Tensile Load Fiber Type Operating Temperature Storage Temperature Pacbage Pimenion

PD-FOIS

CODE WAVELENGTH 31 48 55 SS

1310 1480 1550 Specify

ORDER CODE example:

090301_Passive Device.indd 26

Stage S D

Single Stage Dual Stage

Single Stage

Unit Dual Stage

1310, 1480 or 1550 ±20 40 28 0.4 0.6 55/55 0.05

nm nm dB dB dB dB dB dB mW N

55 45 0.5 0.8 55/55 0.1 500 5 SMF-28e, 250um bare fiber -5 ~+70 -40 ~ +85 5.5(Ф)x34(L)

Connector Type on Port 1 & 2

FIBER Jacket on port 1&2

1 2 3 4 5 6 7 N S

B D L S

FC/UPC FC/APC SC/UPC SC/APC LC/UPC LC/APC MU/UPC None Specify

250μm Fiber 400μm Fiber 900um Loose Tube Specify

Note: 1. Above specifications are for device without connector. For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower.

°C °C mm

Fiber Length Q S

0.75m Specify

PD-FOIS-31-A-D-2-B-Q

11-03-2009 15:11:15

Switch/Routing and Attenuator

Manual VOA

applications • In-line Power Control • Transmitter Power Equalization

FEATURES

Senko’s Manual Variable Optical Attenuator features high resolution, and wide dynamic range with very convenient adjustment, also it has low insertion loss, low wavelength dependent loss, and low polarization dependent loss. Parameters

VALUE

Operating Wavelength Excess Insertion Loss 1 Attenuation Range Return Loss Resolution PDL Operating Temperature Storage Temperature Fiber Type Fiber Length Package Dimension Connectors

CODE 3 5 T

1310±40, 1490±10 and 1550±40 1.0 1.0~30 45 0.1 0.15 0~70 -40~+85 Corning SMF-28e 250um bare fiber, with 900um loose tube 1±0.1 60 (L) x 16(W) x 8(H) None or Specified

WAVELENGTH 1310 1550 Three Windows

PD-MVOA

ORDER CODE example:

090301_Passive Device.indd 27

Unit

B 9 2 3

FIBER TYPE 250μm Bare fiber 900μm 2mm 3mm

0 1 2 3 4 5 6 7

CONNECTOR None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

10 15

nm dB dB dB dB dB °C °C m mm

Note: 1. Insertion loss values include WDL, TDL, PDL.

Switch / routing And attenuator

• Low Insertion Loss • Wide Attenuation Range • High Resolution

27

FIBER LENGTH 1.0M 1.5M

PD-MVOA-5-2-0-10

11-03-2009 15:11:15

PM Products

PM Polarization Combiner/Splitter

applications • Polarization Mode Dispersion Compensator • EDFA & Raman Amplifier • Coherent Telecommunication Systems • Fiber Optic Sensor

Compact High Performance

Senko’s Polarization Beam Combiner/Splitter is a high performance component that combines two orthogonal polarization signals into one output fiber, The typical configuration uses two PM fibers for the input and the SM fiber for the output. The device can also be used as a beam splitter.

PM products

Parameter 1,2

Values

Grade Center Wavelength Operating Wavelength Range Typ. Insertion loss Max. Insertion loss Min. Return Loss Min. Extinction Ratio (for Splitter only) Min. Directivity Max. Optical Power (CW) Max. Tensile Load Fiber Type 3 Operating Temperature Storage Temperature Packaging Dimenfion

Unit

Grade P

Grade A 1310,1480 or 1550 ±40

0.4 0.6

nm nm dB dB dB dB dB mW N

0.5 0.7 50

22

20 50 500 5 PM Panda Fiber on Port 1 & 2 -5 to +70 -40 to +85 5.5(Ф)x35 (L)

°C °C mm

• Compact High Performance • High Extinction Ratio • Low Insertion Loss • High Directivity

Note: 1. Above specifications are for device without connector. 2. For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower. 3. The PM fiber and the connector key are aligned to the slow axis.

28

PD-PMBC PD-PMBS

CODE

WAVELENGTH

Grade

CONNECTOR Type on Port 1, 2 & 3

FIBER Jacket on PORT 1, 2 & 3

Fiber Type on Port3

31

1310

P

Premium

1

FC/UPC

B

250μm Fiber

1

48

1480

A

A Grade

2

FC/APC

D

400μm Fiber only for PM Fiber

2

55

1550

3

SC/UPC

L

900μm Loose Tube

3

SS

Specify

4 5 6 7 N

SC/APC LC/UPC LC/APC MU/UPC None

S

Specify

S

ORDER CODE example:

PD-PMBC-31-P-2-D-2-Q

ORDER CODE example:

PD-PMBS-48-P-1-D-2-S

090301_Passive Device.indd 28

SMF-28 FIBER PM Panda Fiber, Slow Axis align 45°to Port 1 PM Panda Fiber, Slow Axis align to Port 1 Specify

Fiber Length Q

0,75m

S

Specify

11-03-2009 15:11:16

PM Products

PM Isolator

applications • Fiber Optic Lasers • Optical Transmitters & Transceivers • Fiber Amplifiers • Fiber Sensors

FEATURES • High Isolation • Low Insertion Loss • Large Aperture Features

Parameter 1,2

Values

Stage Grade Center Wavelength (λc) Operating Wavelength Range Typ. Peak Isolation Min. Isolation at 23°C Typ. Insertion Loss at 23°C Max. Insertion Loss at -5°C-70°C Min. Return Loss (Input/Output) Min. Extinction Ratio(only for B tyep) Min. Extinction Ratio(only for F type) Max. Optical Power (CW) Max. Tensile Load Fiber Type 3 Operating Temperature Storage Temperature Package Dimension

PD-PMI

CODE

WAVELENGTH

Single Stage Grade P

Grade

Stage

31

1310

P

Premium Grade

S

48

1480

A

A Grade

D

55

1550

ORDER CODE example:

090301_Passive Device.indd 29

Single Stage Dual Stage

Dual Stage Grade A Grade P 1310, 1480 or 1550 ±20 40 58 26 48 0.5 0.5 0.65 0.65 55 55 18 20 23 25 500 5 PM Panda Fiber -5 to +70 -40 to +85 5.5(Ф)x35 (L)

42 28 0.4 0.55 55 20 25

Axis Alignment F B

Note: 1. Above specifications are for device without connector. 2. For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower. 3. The PM fiber and the connector key are aligned to the slow axis.

Unit

Fast Axis Blocked Both Axis Working

CONNECTOR Type on Port 1 & 2

Grade A

55 45 0.6 0.8 55 18 23

nm nm dB dB dB dB dB dB dB mW N °C °C mm

FIBER Jacket on PORT 1&2

0

None

B

1

SC/UPC

D

2

SC/APC

L

3

FC/UPC

T

4 5 6 7

FC/APC LC/UPC LC/APC MU/UPC

250μm Panda Bare Fiber 400μm Panda Bare Fiber 900μm Loose Tube with 400μm Panda fiber 900μm Loose Tube with 250μm Panda fiber

PM products

Senko Polarization Maintaining Isolator is characterized with low insertion, high isolation, and high extinction ratio. It’s ideal for PM fiber amplifier, fiber laser, high speed communication systems and instrumentation applications.

29

Fiber Length Q

0.75m

S

SPecify

PD-PMI-55-P-D-F-1-B-S

11-03-2009 15:11:16

PM Products

PM Filter Coupler

applications • • • •

Fiber Optic Instruments Fiber Amplifiers Fiber Lasers Fiber Sensors

Features • Low Insertion Loss • High Return Loss

Senko Polarization Maintaining Filter Coupler series is manufactured using advanced technology to allow the input signal to split into various ratio with high extinction ratio.

PM products

Parameter 1,2

30

Values

Port Type Center Wavelength Operating Wavelength Range Type Max. Excess Loss Max. Uniformity (only for 50/50) Tap Ratio (Port 2/4) Min. Return Loss Min. Extinction Ratio (only for F type) Min. Extinction Ratio (only for B type) Max. Optical Power (CW) Max. Tensile Load

1X2

WAVELENGTH

Port

Coupling Ratio

Axis Alignment

1310

1

1x2

01

1/99

F

55

1550

2

2x2

02

2/98

B

05

PD-PMFC

31

ORDER CODE example:

090301_Passive Device.indd 30

nm nm

1x2 2x2 0.7 1.0 0.5 0.7 1±0.2%, 2±0.4%, 5±1.0%, 10%, and 50% 50 22 22 20 18 500 (only for Splitter) 5 SMF-28e or PM Panda Fiber on Tap Port PM Panda Fiber on lnput & Output Port -5 to +70 -40 to +85 5.5(Ф)x35(L)

Operating Temperature Storage Temperature Package Pimension

CODE

2X2 1310 or 1550 ±40

Fiber Type 3

Fast Axis Blocked Both Axis Working

Note: 1. Above specifications are for devices without the connectors. 2. For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, and ER will be 2dB lower. 3. The PM fiber and the connector key are aligned to the slow axis. And for F type, fast axis is blocked.

Unit

CONNECTOR Type on Port 1, 2, 3 & 4

FIBER Jacket on PORT 1, 2, 3 & 4

0

None

B

1

SC/UPC

D

5/95

3

FC/UPC

L

10

10/90

4

FC/APC

T

40

50/50

7

MU/UPC

250μm Panda Bare Fiber 400μm Panda Bare Fiber 900μm Loose Tube with 400μm Panda fiber 900μm Loose Tube with 250μm Panda fiber

dB dB % dB dB dB mW N

°C °C mm

Fiber Length Q

0.75m

S

Specify

PD-PMFC-31-2-04-F-2-B-Q

11-03-2009 15:11:17

PM Products

PM Optical Circulator

applications • • • •

Fiber Optic Instruments Fiber Sensors Coherent Detecting Research

Features • Low Insertion Loss • High Return Loss

Parameter 1,2

Values

Type Center Wavelength Operating Wavelength Range Min. Isolation Typ. Isolation Peak Isolation Typ. Insertion Loss Max. Insertion Loss Min. Return Loss Min. Extinction Ratio Min. Cross Talk Max. Optical Power (CW) Max. Tensile Load Fiber Type 3 Operating Temperature Storage Temperature Package Dimension

Type A

Unit Type B

1310 or 1550 ± 30 40 46 52 0.7 0.9

55

22

nm nm dB dB dB dB dB dB dB dB mW N

± 20 20 30 40 0.6 0.8 20

50 500 5 PM Panda Fiber -5 to +70 -40 to +85 5.5(Ф)x35(L)

°C °C mm

NOTE: 1. Above specifications are for device without connector. 2. For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower. 3. The PM fiber and the connector key are aligned to the slow axis and fast axis is blocked.

PM products

Senko Polarization Maintaining Optical Circulator is a compact high performance component transmits the incoming signal from port1 to port2.while transmitting another incoming signal from port2 to port3.

31

CODE

WAVELENGTH 1310 1550

PD-PMCIR

31 55

ORDER CODE example:

090301_Passive Device.indd 31

CONNECTOR Type on Port 1, 2 & 3

Type A B

Type A Type B

0 1 2 3 4 5 6 7

None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

FIBER Jacket on port 1, 2 & 3 B D L T

250μm Panda Bare Fiber 400μm Panda Bare Fiber 900μm Loose Tube with 400μm Panda fiber 900μm Loose Tube with 250μm Panda fiber

Fiber Length Q S

0.75m Specify

PD-PMCIR-31-B-1-B-S

11-03-2009 15:11:17

PM Products

PM Filter Wavelength Division Multiplexers

applications • • • •

Fiber Optic Instruments Raman Amplifiers EDFAs Fiber Sensors

Features • Low Insertion Loss • High Return Loss • High Isolation

Senko filter WDM series provide wavelength division multiplexing while maintaining signal polarization, which is ideal for high speed WDM network systems. Parameters 1,2

PM products

Pass Band

32

Reflection Band

Values Wavelength Range Typ. Insertion Loss Max. Insertion Loss Typ. Isolation Min. Isolation Wavelength Range Typ. Insertion Loss Max. Insertion Loss Typ. Isolation Min. Isolation

1270-1350(1530-1600) 0.4 0.6 30 25 1530-1600(1270-1350)

Min. Extinction Ratio Min. Return Loss Thermal Stability Max. Optical Power (CW) Max. Tensile Load Fiber Type 3 Operating Temperature Storage Temperature Package Dimension

PD-PMFWDM

CODE 3155 5531 4855 5548 5155 5551

1310nm Pass/1550nm Reflect 1550nm Pass / 1310nm Reflect 1480nm Pass / 1550nm Reflect 1550nm Pass / 1480nm Reflect 1510nm Pass / 1550nm Reflect 1550nm Pass / 1510nm Reflect

ORDER CODE example:

090301_Passive Device.indd 32

1450-1490(1530-1600) 0.4 0.6 30 25 1530-1600(1450-1490) 0.3 0.5 15 12 20 50 ≤0.005 500 5 PM Panda Fiber -5 to +70 -40 to +85 5.5 (Ф)x35(L)

Connector Type on Port 1, 2 & 3

WAVELENGTH

0 1 2 3 4 5 6 7

None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

Unit 1500-1520(1530-1570) 0.5 0.7 30 25 1530-1570(1500-1520)

nm dB dB dB dB nm dB dB dB dB dB dB dB/°C mW N °C °C mm

FIBER Jacket on PORT 1, 2 & 3 B D L T

250μm Panda Bare Fiber 400μm Panda Bare Fiber 900μm Loose Tube with 400μm Panda fiber 900μmLoose Tube with 250μm Panda fiber

Note: 1. Above specifications are for device without connector. 2. For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower. 3. The PM fiber and the key are aligned to the slow axis.

Fiber Length Q S

0.75m Specify

PD-PMFWDM-4855-1-B-S

11-03-2009 15:11:18

PM Products

In-line Polarizer

applications • • • •

Communication Systems Fiber Sensors Test Instrumentations Research

Features • High Extinction Ratio • Low Insertion Loss • High Return Loss

Parameter 1,2 Center Wavelength Operating Wavelength Range Typ. Insertion Loss at 23°C Max. Insertion Loss at 23°C Min. Return loss Typ. Extinction ratio at 23°C Min. Extinction ratio at 23°C Max. Optical Power (CW) Max. Tensile Load Fiber Type 3 Operating Temperature Storage Temperature Package Imension

Values

Unit

1310, 1480 or 1550 ±50 0.3 0.5 50 30 28 500 5 PM Panda Fiber or SMF-28e -5 to +70 -40 to +85 5.5(Ф)x35(L)

nm nm dB dB dB dB dB mW N °C °C mm

Note: 1. Above specifications are for devices without connectors. 2. For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower. 3. The PM fiber and the connector key are aligned to the slow axis.

PM products

The In-line Polarizer is designed to pass light with one specific polarization while blocking the other polarization with high extinction ratio. It can also be used to enhance the extinction ratio of signals with its excellent polarization properties.

33

CODE

PD-ILP

WAVELENGTH 31 48 55 SS

1310nm 1480nm 1550nm Specify

ORDER CODE example:

090301_Passive Device.indd 33

Connector Type on Port 1 & 2 0 1 2 3 4 5 6 7

None SC/UPC SC/APC FC/UPC FC/APC LC/UPC LC/APC MU/UPC

FIBER Jacket on PORT 1 & 2 B D L T

250μm Panda Bare Fiber 400μm Panda Bare Fiber 900μm Loose Tube with 400μm Panda fiber 900μm Loose Tube with 250μm Panda fiber

Fiber Type on Port 1 & 2 1 2

PM Panda Fiber SMF-28e Fiber

Fiber Length Q S

0.75m Specify

PD-ILP-48-2-B-2-Q

11-03-2009 15:11:18

Sub Components/Special Components Splice Protection Sleeve Senko offers high quality Splice Protection Sleeves, which are the industry standard for durable and lasting protection of single fiber splices or 4/8/12 fiber ribbon respectively.

applications • Single fiber splice • Ribbon fiber splice • Fiber optics

Features • Durable stability • No influence to splice loss • Strong protective ability • Wide operating temperature (-40~85°C)

Sub Components / special components

Specification a. FPT-01 series for single fiber up to 900um fiber.

Model

Sleeve Length1 (mm)

Strength member length (mm)

Inner /Outer tube material

Protective tube material

25 40 60

20 35 55

EVA / EVA EVA / EVA EVA / EVA

Stainless steel Stainless steel Stainless steel

FPT-01-25 FPT-01-40 FPT-01-60

Sleeve Dimension after shrink (Max, mm) (OD)3.2x(L)25 (OD)3.2x(L)40 (OD)3.2x(L)60

b. FPT-08 and FPT-12 series for ribbon fiber up to 12 fibers. (One protective tube 2)

Model

Fiber count

Sleeve Length* (mm)

FPT-08-30 FPT-08-45 FPT-08-60 FPT-12-30 FPT-12-45 FPT-12-60

Up to 8 Up to 8 Up to 8 Up to 12 Up to 12 Up to 12

30 45 60 30 45 60

Strength member length (mm) 25 40 55 25 40 55

Inner /Outer tube material EVA / EVA EVA / EVA EVA / EVA EVA / EVA EVA / EVA EVA / EVA

Strength member material Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic

Sleeve Dimension after shrink (Max, mm) (OD)4.0x(L)30 (OD)4.0x(L)45 (OD)4.0x(L)60 (OD)5.0x(L)30 (OD)5.0x(L)45 (OD)5.0x(L)60

NOTE: 1. Customized size is also available. 2. Dual protective tube is also available.

34

Order Information

Part Number FPT-01-25 FPT-01-40 FPT-01-60 FPT-08-30 FPT-08-45 FPT-08-60 FPT-12-30 FPT-12-45 FPT-12-60

ORDER CODE example:

090301_Passive Device.indd 34

Description Single fiber, 25mm length, single stainless steel. Single fiber, 40mm length, single stainless steel. Single fiber, 60mm length, single stainless steel. 8-Ribbon fiber, 30mm length, single ceramic tube. 8-Ribbon fiber, 45mm length, single ceramic tube. 8-Ribbon fiber, 60mm length, single ceramic tube. 12-Ribbon fiber, 30mm length, single ceramic tube. 12-Ribbon fiber, 45mm length, single ceramic tube. 12-Ribbon fiber, 60mm length, single ceramic tube.

FPT-01-25

11-03-2009 15:11:19

090301_Passive Device.indd 35

11-03-2009 15:11:20

090301_Passive Device.indd 36

11-03-2009 15:11:29