Report Equipment Design .docx

UNIVERSITI KUALA LUMPUR MALAYSIAN INSTITUTE OF CHEMICAL AND BIOENGINEERING TECHNOLOGY STUDENT’S NAME

EQUIPMENT DESIGN MARKING SHEET DESIGN PROJECT 2 (CPB 30803) Jan 2018 STUDENT’S ID NO.

1. 2. 3. 4. 5. PROJECT TITLE GROUP Chapter 1. Introduction

2. Details calculation

3. HAZOP

4. Mechanical drawing

5. Specification datasheet

6. Report Format

SUPERVISOR Items assessed/expected contents Weightage Design intention, operating conditions, input and output stream composition (mass balance) and other information related with the x4 equipment design consideration are concisely introduced. 0 1 2 3 4 5 All of the calculation related with the design (e.g. determination of plate number, reflux ratio, diameter, length etc.). The assumption taken for the calculation must be stated clearly. Supporting data must include in the appendix. Utilization of process system engineering x3 software e.g. Aspen, HYSYS, Chemcad, Pro II and other online calculation tools. 0 1 2 3 4 5 HAZOP study for equipment Nodes choice, usage of proper guide words, identify the deviation, 3 causes and consequences. Suggest action plan. 0 1 2 3 4 Clear drawing, completed with dimension and legend. All of the components of the equipment are drawn properly. The scale of the x4 drawing is proportional. Usage of software for drawing. 0 1 2 3 4 5 Equipment ID, type of equipment, purpose. Material of construction, dimension, internal design (trays, weir, downcomer, packing type and support, demister pads, rotors, blade, baffle, etc.) Valves, x4 fittings, manhole etc. 0 1 2 3 4 5 Readability of report, quality of language, reference style. x2 0 1 2 3 4 5

Score 20

15

15

20

20

10

TOTAL SCORE

/100

TOTAL MARKS (TOTAL SCORE/100) x 20%

1

COMMENTS:

Evaluated by:

_______________________________________ Date:

2