R4u-20a Rugged 4u Rackmount Computer W/ Shock Isolated Drives

R4U-20A

RUGGED ENTERPRISE CLASS

COTS Plus 4U ENCLOSURE Optimized for High Shock / Vibration Environments

C6CHASSIS

SYSTEMS ENGINEERED TO PERFORM®

The R4U-20A is designed to survive! Aircraft grade aluminum construction, shock mounted unibody drive support, self locking stainless hardware, solid construction designed and manufactured in the USA. These system are ideal for high shock / high vibration environments such as vehicular or aircraft mount or transit case installation. The short depth of 20 inches allows it to fit virtually all transit cases. The rugged construction and enhanced features will assure its reliable operation in that challenging environment. FEATURES  Compact 4U x 20-inch (508mm) design  Aircraft grade 5052-H32 aluminum construction  Milled 1/4 inch solid aluminum front panel  Stainless steel self locking hardware  Shock mounted Unibody front sub panel w/ drives  Three 5-1/4 inch drives—shock isolated  Two internal 3-1/2 inch drives—shock isolated  Fits ATX motherboard  Two 92mm 60CFM fans—High Reliability Series  Front panel air filter in door—full width  Front panel USB connectors (behind front door) SUPPORT  Superior pre- and post-sales technical support  All products carry a two year limited warranty CUSTOMIZATION  Custom paint and logo available  Custom chassis features to fit customer requirements  Turnkey configured systems to customer spec

The Original Industrial Computer Source®

Chassis Plans · 8295 Aero Place · San Diego · CA · 92123 Phone (858) 571-4330 · Fax (858) 571-6146 [email protected] www.chassisplans.com © 2009 Chassis Plans

NEXT GENERATION SOLUTION

R4U-20A RUGGED COTS Plus 4U ENCLOSURE Primary construction is from high strength aircraft grade .090-inch 5052-H32 aluminum alloy. The front panel is milled from a single piece of .250-inch aluminum. A formed and welded aluminum door covers the drives and supports the air filter. An integrated system is very light at only 3035 lbs depending on installed components. At only 20-inches deep, this makes the R4U-20A perfect for transit case installations.

The system is provided with three front accessible 5-1/4 inch drive bays (shock isolated) and two internal 3-1/2 inch drives (shock isolated). A variety of hot swap drive carriers are available. Provision for 2-1/2 inch or solid state drives can be made for extreme environments or extended temperature requirements.

For environmental and emissions protection, the front panel provides an embedded EMI/environmental gasket and multiple captive fasteners on the door to secure the system from contamination. The lid is secured with fourteen captive screws and is provided with an EMI/environmental gasket. A key feature for system survivability is the front sub panel Unibody structure in which the drives are mounted is secured using heavy duty shock mounts. This Unibody drive support is the optimum method for protecting drives versus shock mounting individual drives. The overall effect is a very robust enclosure to protect the system in any foreseeable environmental environment. Cooling is provided by two Sanyo-Denki aluminum body High Reliability Series (>100K hrs MTBF) 92mm fans providing 60CFM each of high pressure air flow. The front door is provided with an easily serviced and washable air filter with various classes available. A chassis over- temperature alarm and fan failure circuit monitors chassis conditions. Optional higher velocity fans, rear fans and fan speed control is available.

The Original Industrial Computer Source®

Page 2

System controls are mounted behind the front door and include power control, system reset, and alarm reset. Mounted in the front panel is the Power-on LED, HDD Access, Fan Failure and Overtemp LEDs. Two USB ports are also provided behind the front door. Custom control and indicator configurations are easily accommodated. The R4U-20A provides for mounting an ATX motherboard. This configuration fits the mission requirements for access to the latest processing technology and lower cost. A hold-down bar provides for securing installed cards for any adverse shock and vibration environment. A standard 4U PS/2 style power supply can be mounted including redundant supplies and DC input. A Mil Std 704 or 1275 compliant supply is available for military airborne or ground installations. The chassis provides a rear mounted ground stud and low smoke / zero halogen wiring is available for military compliance. All fasteners are stainless steel and either self locking or are secured with Loc-Tite during assembly. Chassis Plans products are designed and being tested to meet MIL-STDs 810G, 167-1, 461F, and 901D requirements. On-site, next day and extended warranties are available. Configuration Management and long life product availability is also available.

NEXT GENERATION SOLUTION

R4U-20A RUGGED COTS Plus 4U ENCLOSURE Survivability Built to survive high shock and vibration environments:  Shock isolated front Unibody sub panel shock mounts drives  Multiple mounting points for mother board and CPU heat sinks  Dual card hold downs  Self locking fasteners or Locktited  All cables securely dressed and tied down Dimensions (W x H x D) 17 x 6.95 (4U) x 20.0-inch (508 x 176.5 x 483mm) Weight 30-35 lbs typical configured system

Drive Capacity Three 5.25-inch front drive bays Two internal 3.5-inch hard drives Drives mounted on heavy duty shock mounted Unibody front sub panel Multiple options for hot swap drives Front Panel Indicators Power LED HDD Access LED Fan Failure LED Chassis Over-Temperature LED

Construction Front panel .250 milled 5052-H32 aluminum Chassis, lid, front door, misc. parts .090 5052-H32 Aluminum alloy Rear slot panel 18ga CRS Finish Aluminum—Chem Film per Mil-C5541E Class 3 Clear Steel Parts—Zinc Plated Hardware Self locking stainless steel Loctite where appropriate

Front Panel Controls/Connections Power on/off switch System reset switch Alarm Reset Switch Two USB connectors (Controls & USB behind front door) Custom control & indicator layouts available Cooling Fans Two high speed 92mm inch fans 60CFM free air rating each Sanyo-Denki High Reliability Series >100K hrs MTBF Cooling system alarm board Air filter—1/4” Thick 30PPI Alternate filter material available Optional very high velocity fans available Optional 2x 50mm rear fans

Color Black powder coat Medium texture Exterior front panel & door finished Front Door Aluminum—formed and welded Secured with 4 captive fasteners EMI/Environmental gasket provided Locking latch optionally available Supports 30ppi washable foam filter (other filter classes optionally available) Lid Aluminum Secured with 14 captive fasteners EMI/Environmental gasket provided

The Original Industrial Computer Source®

Rear Slot Panel 7 I/O slots 18GA CRS, zinc plated 10-32 Ground Stud 2x optional 50mm fans

Motherboard Mounting Fits ATX motherboard (9.6 x 12-inches) Card Hold Down Tailored to individual installed card height Environment Operating and storage temperature, shock and humidity is dependant on installed components Power Supply PS/2 form factor Single and N+1 redundant supplies available AC, DC and Mil-Std-704/1275 configurations

Page 3

USB ALARM RESET POWER SYSTEM RESET

The Original Industrial Computer Source®

Page 4

The Original Industrial Computer Source®

Page 5