Product Guide

ASPIRATING SMOKE DETECTION

VESDA® When Performance Counts

Product Guide 2000

Effective July 2000

STANDARD (VLP) Detector Configurations A standard set of product configurations are described below. Model numbers and positions are pre-configured for easy ordering. Adjustable sensitivity range is .005-20%/m Obs Part Number and Description LaserPLUS “Detector only” enclosure with three blank plates. VLP-000

LaserPLUS “Detector only” enclosure with three blank plates. The plate in the far left position includes Fire 1 Alarm and OK (FOK) LED’s. VLP-400

LaserPLUS Detector with two blank plates and with all the features of a standard Display module. The Display module is mounted in the far right position. VLP-002

LaserPLUS Detector with a centrally mounted LCD Programmer module and a Standard Display. VLP-012

Notes: 1. All detectors include a head termination card with 7 relays (HTC7) and a VESDAnet socket. socket 2. The blank plate in the far left position includes the VESDA logo. logo

2

SCANNER (VLS) Detector Configurations A standard set of product configurations are described below. Model numbers and positions are pre-configured for easy ordering. Adjustable sensitivity range is .005-20%/m Obs Part Number and Description LaserPLUS Scanner “Detector only” enclosure with three blank plates. VLS-200

7 Relay Version

VLS-300

12 Relay Version

LaserPLUS Scanner “Detector only” enclosure with three blank plates. The plate in the far left position includes Fire 1 Alarm (for any sector) and OK (FOK) LED’s. VLS-600

7 Relay Version

VLS-700

12 Relay Version

LaserPLUS Scanner Detector with two blank plates and Scanner Display module. The Display module is mounted in the far right position. VLS-204

7 Relay Version

VLS-304

12 Relay Version

LaserPLUS Scanner Detector with a centrally mounted LCD Programmer module and a Scanner Display module. VLS-214

7 Relay Version

VLS-314

12 Relay Version

Notes: 1. All detectors include a head termination card with either 7 or 12 relays and a VESDAnet socket. socket 2. The blank plate in the far left position includes the VESDA logo. logo 3. Scanner Detectors are almost identical to the look of the Standard VLP. However, the Scanner Display includes an extra LED and the scan option. option

COMPACT Detector Configurations

Part Number and Description VESDA LaserCOMPACT (VN), VESDAnet Version plus relay output, compatible with the entire family of VESDA Laser products (VLP, VLS, VSM-3, etc...). Adjustable sensitivity range is .005-20%/m Obs, Optional Remote Display and 7 Relays, 3 Levels of Alarm provided. Requires Separate Power. Programming: Programming: The VN Version utilizes VESDA Laser Programmers, Version 2.25 or later. Programmer configurations include: Hand Held, Remote Mount, Rack Mount versions, or PC Link HLI. VLC-505

VESDA LaserCOMPACT (RO) Relay Only Version, 3 Levels of Alarm provided, Adjustable Sensitivity Range .005-20%/m Obs, Directly Programmable with V-Config Software, V. 3.07 or later. Remote LED output/option. Requires Separate Power. Programming: Programming: The RO Version requires V-Config PRO Software, Version 3.07 or later, and RO-Cable, P/N VSP-509 Cable. See Spares and Accessories for Cable information. VLC-500

4

Remote Mount Configuration (Single Box) Part Number and Description

Programmer, Programmer includes remote termination card. No relays. VRT-100

Display, Standard Version with a remote termination card. VRT-200 VRT-600

With 7 Relays Without Relays

Display, Scanner Version with a remote termination card. VRT-400 VRT-700 VRT-800

With 7 Relays Without Relays With 12 Relays

Display, Compact Version VRT-K00 VRT-J00

Without Relays With 7 Relays

VESDAnet Socket VRT-300

Remote Termination and Relay Processor Card with blank plate, in remote mounting box. The 7 Relay version can also be used with VESDA Laser Compact. VRT-500 VRT-900

With 7 Relays With 12 Relays

Note: All configurations include this remote mounting box.

5

Sub Rack Configurations The VESDA Sub Rack can be configured thousands of different ways. For ease of configuration, this guide includes a configuration worksheet. It can be printed and used as required. NOTE: You are required to choose a module for each of these four positions. The modules will be assembled in the configuration you specify - from left to right. Position 1 is the far left position, while Position 4 is the far right.

VSR-0000 Position

Position

Position

Position

1

2

3

4

IMPORTANT: • The Sub-Rack mounts on any standard 19” rack . Sub-Rack Enclosures are also available. • Front and Back Modules are preconfigured on the following pages. However, if you purchase spare modules it is important to note: a. All programmers and displays require remote termination cards. b. Every relay termination card requires a display or relay processor board. c. If you are using the sub rack for remote relays only, you must have a relay processor board in each position that has a relay!

6

Configure Your Sub Rack

How To Self-Configure Your 19” Sub Rack: Introduction: Sub Rack configurations include the options for both “Front” and “Back” Modules. A Front module is a display, programmer, or VESDAnet socket. Back modules are remote termination cards with a variety of relay options. To configure your Sub Rack, use the matrix that follows. To check some of your configurations, see the pre-configured samples. The “Empty” Sub Rack: VSR - 0000 is a 19” Sub-Rack without VLP Modules. Once modules are added, the part number will change as appropriate. VSR-0000 has four positions for modules. Choose a P/N Digit for each of these positions. Simply Follow These Steps: •

Start with the empty rack, Part Number, VSR-0000.

•

Choose the modules you want in positions 1 through 4.

•

Configure your Part Number by adding the appropriate P/N Digit after the prefix VSR. The P/N Digit is shown on the matrix. P/N Digits must be inserted for each of the four positions.

Pre-configured Examples:

VSR-2100: 19” Sub Rack with 1 Standard Display with 7relay remote termination card in position 1 and a Programmer in position 2. Blank plates are in position 3 and 4.

VSR-4423: 19” Sub Rack with: 2 Scanner Displays with 7relay remote termination cards in positions 1 and 2. A Standard Display with 7-relay remote termination card occupies position 3 and a VESDAnet Socket is in position 4.

7

Configuration Matrix Use this matrix to configure each sub rack. Choose four modules per subrack. Your finished part number will be VSR- XXXX (Replace X will the modules of choice below) P/N Digit

Description of P/N Digit

VSR -

Qty

XXXX 0

Blank Plate

1

Programmer with remote termination card - no relays

2

Standard display with 7 relay remote termination card

3

VESDAnet Socket

4

Scanner display with 7 relay remote termination card

5

(DRP) 7 relay remote termination card and relay processor

6

Standard display with remote termination card - no relays

7

Scanner display with remote termination card - no relays

8

Scanner display with 12 relay remote termination card

9

(DRP) 12 relay remote termination card and relay processor VLC

ADD

J

VLC VN Display with RTC7

K

VLC VN Display with RTC0 (no relays)

VSR-0000 SubRack

8

VESDA Laser Accessories

Part Number

Description The PC- Link High Level Interface (PC-Link HLI) connects a PC and VESDA LaserPLUS system. Each PC-Link HLI includes 2 cables (It does not include a PC.): - RS232 from HLI to PC Com port - RS485 from HLI to VESDAnet Socket

VHX-0200 PC-Link HLI, Sliding Windows, RS232 Interface. (For VSM3 and VConfig) VHX-0300 PC-Link HLI, Open Protocol Protocol, RS232 Interface. VHX-00090 PC-HLI, Modem Cable to connect PC-HLI directly to a modem. Note: This would be used in lieu of the RS232 serial cable.

Hand Held Programmer Hand Held Programmer, includes Lead. VHH-1000

9

Software

Part Number

Description VSW-007 VESDA System Management (VSM 3) Software Package, For Windows 95, 98 and NT. Requires HLI (P/N VHX-0200). For use with LaserPLUS, LaserSCANNER and LaserCOMPACT. Does not include PC. Requires: Pentium or higher processor, Min. 60 MHz, 16 MB of memory, Microsoft Windows 95 or higher, 1024 X 768 screen resolution/color display, High speed FIFO serial port (16550 serial chip, or compatible), Approx. 10 MB free disk space..

VSW-002 ASPIRE Pipe Modeling Software, Windows™ Based. Works with WIN 95, 98 and NT. Models LaserPLUS, LaserSCANNER and LaserCOMPACT. (Imperial and Metric Options) V-Config (VESDAnet Configuration Software), Windows™ Based. Works with WIN 95, 98 and NT. Requires PC Link HLI (P/N VHX-0200) if used on a VESDAnet System. Specify Software Version (Basic or Pro). Configures LaserPLUS, LaserSCANNER and LaserCOMPACT.

VSW-004 V-Config Basic: Includes Air Flow Status, and Relay Configuration. VSW-005 V-Config PRO Includes all the “Basic” plus Read Event Log Downloading capabilities and Smoke Trend representation.

Note: ASPIRE and V-Config Basic can be downloaded free at www.vesda.com. www.vesda.com.

10

Spares & Accessories for VESDA Laser Series

Part Number

Description

VRT-000 Remote Mounting Single Box with escutcheon only (Blank Plate and Termination Card not included) Rack with 4 Blank Plates (Modules and Termination Card not VSR-0000 Remote 19” Sub Rack, included) plate, with VESDA logo VSP-000 Blank plate VSP-300 Blank Plate, without VESDA logo VSP-001 Programmer Module VSP-002 Standard Display Module VSP-003 VESDAnet Socket Kit VSP-004 Scanner Display Module VSP-005 Filter Cartridge (recommend replacing every 2 - 5 years) VSP-006 Detector Chassis Assembly, includes Manifold VSP-007 “0” Relay Remote Termination Card VSP-008 Remote Termination Card (RTC7) VSP-009 Scanner Chassis Assembly, includes Scanning Manifold VSP-011 Recess Mounting Kit for VLP or VLS Detector VSP-012 Recess Mounting Kit for Remote Single Boxes VSP-013 Detector Cover Assembly with EMC Shields

11

Spares & Accessories for VESDA Laser Series, Cont’d Part Number

Description

VSP-014 7-Relay Head Termination Card (HTC7) VSP-015 Aspirator for LaserPLUS & SCANNER VSP-016 12 Relay Head Termination Card (HTC12) VSP-019 Filter Cover VSP-020 Cover Screws, 4 off. Adaptors, Kit of four VSP-021 Metric to Imperial Pipe Adaptors VSP-100 Blank Plate with FOK LED’s and Logo VSP-102 Relay Processor Module (DRP) VSP-200 Blank Plate, EMC Painted, without Logo VSP-208 12 Relay Remote Termination Card (RTC12) VSP-501 Aspirator, LaserCOMPACT VSP-502 Compact (VN) Remote Display Module VSP-509 RO-Cable for use with Laser COMPACT Relay Only (RO) version. This cable is required for Programming. V-Config Pro Software is also required. VSP-510 Compact (RO) Termination Card (CTC-RO) VSP-515 Compact (VN) Termination Card (CTC-VN)

12

Pipe and Point Labels

Part Number and Description PIPE & FITTINGS

SAMPLING POINT LABELS

For details of Pipe and Fittings available in your area please contact your nearest authorised VESDA Distributor Distributor,

Miniature Sampling Point Label, Label Round Style - 12 per sheet E700-SPLR E700-SPLG

(Red) (Grey)

Sampling Point Decal Wrap Around Style - 200 per roll Place center area over sampling point and wrap decal around diameter of pipe. E700-SP-DCL

13

Warranty

Warranty for VESDA Systems •Vision Systems warrants that new VESDA products (excluding consumable items) will conform to its published specifications and remain in good working order during the warranty period of 24 (twenty four) months. •Vision Systems also warrants that product serviced or repaired by its service department will remain in good working order for a warranty period of 24 (twenty four) months from the date of service. This service or repair warranty is only available on product less than 7 (seven) years old and only covers those component parts of the product serviced, repaired or replaced. •Except as provided above, should product under warranty (as described above) not be in good working order, Vision Systems will, at its option, either repair or replace the product or its component parts at no additional charge. •Spare parts and replacement product will be furnished on an exchange basis and will, at the option of Vision Systems either be new, equivalent to new or reconditioned. All replaced spare parts and products become the property of Vision Systems. •This warranty does not cover the repair of damage to the product resulting from negligence or improper use, improper storage or handling of the product, or from accident, disaster, or from use of non-Manufacturer modifications to the product other than in accordance with Vision Systems instructions, or attachment of features not approved by Vision Systems in writing, or services by persons not authorized by Vision Systems in writing to service the product. Warranty service may be obtained by: by •Notifying Vision Systems and giving full description of fault. •Vision Systems will first attempt to rectify fault by supplying replacement component parts. •If rectification is not achieved by component part replacement then distributor is to return faulty product to Vision Systems.

14

For further information please contact:-

Vision Systems - VESDA™ Asia Pacific Sales Australia/New Zealand/South Pacific & Republic of South Africa Phone: Facsimile:

+61 3 9211 7200 +61 3 9211 7202

e-mail:

[email protected]

Hong Kong/China Phone: Facsimile:

+852 9884 4999 +852 2430 3393

e-mail:

[email protected] [email protected]

Japan Phone: Facsimile:

+61 3 9211 7200 +61 3 9211 7202

e-mail:

tony.klerkx @products.vsl.com.au

Singapore Phone:

+65 9795 8111

e-mail:

[email protected]

Taiwan Phone: Facsimile:

+886 227 841 669 +886 227 841 679

e-mail:

[email protected]

www.vesda.com Vision Systems – VESDA Private Bag 215, 495 Blackburn Road Mount Waverley,VIC 3149 Australia Ph: +61 3 9211 7200 Fax: +61 3 9211 7201 Freecall: 1800 700 203

Part No. Product Guide Revision: 01, Dated: 9/00