Power Supplies Full Uk_final1904

Power Supplies 2006

UK

www.arrowne.com/power_supplies

Welcome

Thank you for taking the time to look through the Arrow Power Supply brochure. The following pages are designed to provide an overview of our capabilities, and details of the power supply and conversion products that are available, through Arrow, from some of the world’s leading manufacturers. At Arrow we understand that sourcing the best power supply and conversion products is a critical aspect of modern electronic equipment design and manufacture. Leaving power supply considerations until the end of the design process is simply not an option – careful consideration of power requirements and selection of the most appropriate components and solutions must start as early as possible in the development process. And with the wealth of power products currently available, selection and design-in of the optimum solution can be an increasingly complex and time-consuming task. Fortunately, as this brochure illustrates, Arrow provides a cost-effective, dependable solution for every power requirement, from the smallest Point-Of-Load (POL) DC/DC converter to the highest power AC/DC supply, and from standard ‘off the shelf’ products to modified or fully custom systems and solutions. We also offer comprehensive technical support, from initial design through to final manufacture, as well as a range of sophisticated logistics solutions to ensure a smooth, seamless and highly reliable supply chain. With more than 60 years of industry expertise, Arrow is one of the world’s largest distributors of electronic components and computer products. Add to that a vast range of power supply products, along with all the technical help and value-added services you may require, and we are perfectly positioned to act as a single source for your entire electronic product requirements. It’s easy to see why our product range, capabilities and services make us the supplier of choice for countless satisfied customers.

Steve Sessions Marketing Manager Power Supplies UK & Ireland

2

Powering the Supply Chain

Arrow Power Supplies 2006 Standard and custom AC/DC and DC/DC solutions from Arrow Electronics

Arrow’s Power Supply Capabilities

4

From Concept to Production – Solutions to Match Every Requirement Whether it’s an off-the-shelf part, a modified standard product or a fully custom solution, Arrow has the products, expertise, experience and capabilities to turn a specification into a deliverable on time and within budget.

Artesyn Technologies

6

Versatile Distributed Power Architecture Solutions from POLA Founder Member • Low Power AC/DC PSUs • Medical Power Supplies • Single-Output External Power Supplies • Non-Isolated DC/DC Converters • Isolated DC/DC Converters Astec Power

8

AC/DC and DC/DC Solutions from 6W to 18kW • Low Power AC/DC Power Supplies • iMP Digitally Controlled AC/DC Power Supplies • Industrial DC/DC Converters • Industry standard ‘Brick Format’ DC/DC Converters • Non-Isolated Converters • Bus Converters C&D Technologies

10

Full Range of Power Conversion Products Meets Requirements ‘from AC to IC’ • Standard AC/DC Supplies (700W to 2000W) • 600W AC/48VDC Front-End Module for DPAs • cPCI™ and PCI™ AC/DC and DC/DC Power Supplies • Rugged Power Supplies • Isolated DC/DC Converters • Non-Isolated POL Converters Tyco Electronics

12

Modular Power Architectures for Industrial Applications • EIPS Series Single Output AC/DC Power Supplies • High Power Front-End Power Supplies • Isolated DC/DC Converters • Non-Isolated DC/DC Converters And Power is Just the Start… From memory to micros, capacitors to connectors and sensors to switches, Arrow’s broad linecard offers a wide range of products to complement and support power supply design and implementation.

www.arrowne.com/power_supplies

3

Arrow’s Power Supply Capabilities From Concept to Production – Solutions to Match Every Requirement

At Arrow we understand the complex challenges of successfully selecting and designing in power supply solutions - and seeing these designs through to production and beyond. That’s why we have built an organisation that can meet the specific needs of our customers across the broadest variety of applications, markets and geographic locations. And to ensure the highest levels of quality we handle the vast majority of activity in-house. Modification and customisation work at our manufacturing facility, for example, involves no third party involvement – all processes, from design and manufacturing through testing and shipping to aftersales support, are owned and performed by experienced and qualified Arrow personnel. Whether it’s an off-the-shelf part, a modified standard product or a fully custom solution, Arrow has the products, expertise, experience and capabilities to turn a specification into a deliverable on time and within budget.

Off-the-Shelf Power Supply Solutions As the following pages illustrate, Arrow offers an extensive linecard of power conversion solutions from some of the world’s leading power manufacturers, including Astec, Artesyn, C&D Technologies and Tyco Electronics. The company also offers a range of standard power supply products from Power One. From sub-1W DC/DC converters to high power AC/DC supplies, the Arrow linecard caters for the broadest possible range of AC/DC and DC/DC conversion requirements. AC/DC power supplies cover power ratings from 16W to 18kW, and include units designed for specific applications such as medical equipment or DIN rail mounting. Configurable, modular supplies with high levels of built in monitoring and control functionality further simplify the specification of implementation of optimised solutions. DC/DC converters comprise isolated and non-isolated Point-Of-Load (POL) devices, cover many standard form factors, and include POLA™ and other power delivery solutions for the latest processor and memory technologies. Value Added Solutions Of course we recognise that, even with a linecard as broad as Arrow’s, there will always be some power conversion applications where a non-standard solution is required. This is where Arrow’s services for providing modified and fully customised power supply services can offer real benefits. Modification and customisation services include everything from the ‘fine tuning’ of existing products to the design, development and delivery of a fully customised supply. In addition, Arrow’s services also provide for the configuration of ‘modular’ supplies, such as those from Astec and Power One, to meet specific requirements in terms of outputs, power ratings, performance and control and monitoring functionality. Arrow’s customisation and configuration services are performed by in-house design engineers based at the company’s UL-approved manufacturing facility in Fremont, California. This facility, which is the largest of its kind in North America, has been operating for over thirty years and has helped make Arrow the leading power supply distributor in the US. Comprehensive customisation services include • Testing • Inspection • Burn-in • Build-to-print • Custom sheet metal and PCBs • Configuration of modular power supplies • Cable assembly design • Kitting • Product documentation

4

• Installation of accessories including: – Fans – Heatsinks – LEDs – Mounting hardware – Power-entry modules – Relays – Switches

Powering the Supply Chain

Arrow’s Power Supply Capabilities From Concept to Production – Solutions to Match Every Requirement

Technical Support Whether its advice and guidance on product selection, the troubleshooting of a specific design issue, or the identification of the external components needed to optimise a power conversion design, Arrow’s comprehensive in-house technical support capabilities can help to simplify and speed the design and implementation of a wide variety of power applications. Arrow’s technical specialists receive continuous training from our supplier partners and can provide support from project inception through to production. Combining many years experience of delivering value-added, ‘design-formanufacture’ solutions with a broad understanding of all available technologies, these teams have a key role to play in helping customers to optimise power designs while reducing development time and cost. Value-Added Services Dealing with Arrow opens the door to a whole range of value added services designed to help you create the most cost-effective solutions with minimum time-to-market. These include • Electronic Interface Services – including EDI solutions and online information regarding backlog, forecasts and dispatch advice • Logistics Services – Including systems for stock replenishment and automatic solutions that eliminate the need for order change notices • Manufacturing Services – Including barcode labelling and shipment consolidation

www.arrowne.com/power_supplies

5

Artesyn Technologies Versatile Distributed Power Architecture Solutions from POLA Founder Member

Artesyn power conversion solutions provide products for the rapid implementation of optimal power supplies, including distributed power architectures leveraging the advantages of intermediate bus or POLA-compliance, as well as proprietary and general-purpose architectures.

Low Power AC/DC PSUs Artesyn’s range of low-power AC/DC PSUs comprises 79 models delivering outputs from 20W to 250W and 3.3V to 48V, and includes single-, dual-, triple- and quad-output variants. Models above 40W also feature harmonic current correction to EN61000-3-2. All of the models in the range are compact, high-efficiency switch-mode designs with a universal input – suitable for use anywhere in the world. • Single-, dual-, triple- and quad-output power supplies • Popular footprints – 4.00” x 2.00” – 4.25” x 2.50” – 5.00” x 3.00” – 6.50” x 3.00” – 6.80” x 3.80” – 7.00” x 4.00” – 7.00” x 4.25” – 7.80” x 3.80”

• Low-cost models for general power applications • Specialised models, such as low-voltage highcurrent for logic-intensive applications

Medical Power Supplies Artesyn produces a growing range of AC/DC power supplies certified for use in medical equipment requiring lower safety ground leakage and higher isolation. These supplies are high-efficiency switch mode designs with full approval to international medical safety standards. Suitable for free air or forced air cooling applications, available models are capable of delivering 50W to 250W full-rated power, making them suitable for a wide range of medical equipment, from monitoring equipment and instrumentation to infusion pump controls or dialysis machines. • Single-, dual-, triple- and quad-output power supplies • 50W - 250W

• Full medical safety approvals: – UL60601-1 – C22.2 No. 601.1-M90 – VDE0750 – IEC60601-1 – EN60601-1

Single-Output External Power Supplies Artesyn’s external AC/DC power supplies provide low-cost, pre-approved solutions for low power portable and desktop applications. • Case dimensions 4.65” x 2.4” x 1.08” • 20W or 40W output power

6

• 12VDC, 15VDC, 18VDC, 24VDC, 48VDC outputs • 20W/5VDC model also available

Powering the Supply Chain

Artesyn Technologies Versatile Distributed Power Architecture Solutions from POLA Founder Member

Non-Isolated DC/DC Converters Artyesyn offers a range of non-isolated POL converters, optimised for cost, performance, transient response or sourcing flexibility. C Class for Economy • C-series POLs up to 200W output power • Output voltages down to 0.59V • Support for redundant current sharing

• Optimised for cost-sensitive applications from 6A to 40A

E Class for Performance • Compact modules deliver power to 99W • Current densities to 140A/in3

• Current ratings to 30A

F Class for Fast Transient Response and Current Density • Highly integrated 12A and 15A Typhoon™ modules • Current densities in excess of 72A/in3 • Low output voltages, trimmable from 1.0V to 2.6V • Minimise board space and external capacitor count and 1.8V to 3.6V • Fast, 300A/µs transient response POLA POL Converters • POLA-compliant modules from 6A to 60A • Modules for bus termination in DDR and QDR memory applications

• General-purpose options with AutoTrack™ power sequencing

Digital Class for Intelligent Power Management • PMbus™-compliant digitally programmable power conversion products

• Includes 20A POL supporting remote configuration, monitoring and diagnostics

Special Purpose POLs Special-purpose modules serve DDR memory and VRM processor POL applications. • 20A and dual 25A/8A memory power converters for SRAM, DRAM and DDR-SDRAM

• VRM processor power modules with outputs from 60A to 105A

Isolated DC/DC Converters Artesyn isolated DC/DC converters meet almost every common design requirement. The range includes standard brick outlines and other common form factors, telecom or industrial input voltages, through-hole or surface-mount, enclosed or open-frame, and dedicated Intermediate Bus Converter (IBC) solutions. Format

Power

Output Voltage Options

Output Current

Full Brick Single Output (RF applications)

500W - 700W

16.8V - 29.4V

17.9A - 25A

1/2 Brick Single Output (RF applications)

300W - 350W

16.8V - 29.4V and 7.2V - 13.2V

11A - 29.2A

1/2 Brick Dual Output

30W - 75W

3.3V/2.5V, 5V/3.3V, 3.3V/1.8V

6A/6A - 15A/15A

1/2 Brick Single Output

16W - 165W

1.2V, 1.5V, 1.8V, 2V, 2.5V, 3.3V, 5V, 12V, 15V

2.5A - 60A

1/4 Brick Dual Output

40W - 116W

1.2V/3.3V, 1.5V/3.3V, 1.8V/3.3V, 2.5V/3.3V, 3.3V/5V

10A/15A - 20A/20A

1/4 Brick Single Output

36W - 200W

1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V, 12V

8.3A - 100A

1/4 Brick Single Output (IBC)

168W - 450W

12V

14A - 37.5A

1/8 Brick Single Output

30W - 100W

1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V

10A - 50A

1/8 Brick Single Output (IBC)

200W - 300W

12V

17A - 25A

General Purpose Isolated Converters General purpose isolated converters provide board-mounted power ratings from 2W to 40W in open frame format and surface mount or through-hole technology. • 12V industrial and 24V/48V telecom inputs • 1.8VDC to 15VDC output voltages

• Single-, dual- and triple-outputs • Negative rail options

www.arrowne.com/power_supplies

7

Astec Power AC/DC and DC/DC Solutions from 6W to 18kW

Astec Power, an Emerson Network Power company, produces standard, modified standard, and custom AC/DC power supplies and DC/DC converters with power ratings from 6W to 18kW.

AC/DC Power Supplies Astec Power’s full AC/DC power supply family delivers outputs from 6W to 18kW in many package styles including open frame, enclosed and DIN-rail mount. The company also manufactures a broad range of external power adaptors, as well as the industry’s first digitally controlled AC/DC switching power supplies. Astec Power AC/DC power supplies fall into the following categories • Bulk Power (350W - 3000W) • Low Power (25W - 350W) – 1U and 3U formats – Open frame/enclosed • DIN Rail (24V 60W - 480W) – 1-4 outputs – Standard DIN format with PFC – External adapters • Intelligent MP (iMP) Series (600W - 1500W) • Medium Power (400W - 1200W) – 1-21 outputs • High Power (1200W - 2500W) – 1-18 outputs Low Power AC/DC Power Supplies Combining wide input voltage ranges, up to four adjustable outputs and enclosed and open frame options, Astec’s Low Power (LP) AC/DC supplies allow designers to address a wide variety of applications with power requirements to 350W. LP models feature • Industry standard footprints • Universal AC input • Remote sense • Adjustable outputs for all common voltages – ±3.3V, ±5V, ±12V, ±15V, ±24V, ±48V • Power fail • Full power delivery to 50ºC • Derated operation to 70ºC • High MTBF Integrated overload and overvoltage protection • Built-in EMI filtering • Extensive safety approvals

Many models also feature • EN61000-3-2 compliance • Supervisory outputs (5V/12V) • Wide-adjust single output • Wide-adjust floating 4th output • Single wire current share • Medical approvals

iMP Digitally Controlled AC/DC Power Supplies The industry’s first digitally controlled AC/DC switching power supplies combine modular design with an onboard microprocessor for programmability and smart communications. Hardware modules give designers the ability to tailor solutions with single-, dual- and triple- outputs in power ratings from 600W to 1500W. Modules can be configured in a selection of four customisable cases accepting input voltages from 85VAC to 264VAC or 120VDC to 350VDC. Cases can accommodate up to seven individual modules with output options ranging from 2VDC to 60VDC. Using the iMP Series intelligent I2C control, designers can program key features on each output, including • Voltage The iMP series products meet worldwide safety and • Output enable/sequencing performance standards including listings from UL and • Module inhibit/enable polarity CE, as well as full medical compliance with EN60601. • DC OK thresholds • Output current limit set-point and type • Overtemperature threshold

8

Powering the Supply Chain

Astec Power AC/DC and DC/DC Solutions from 6W to 18kW

DC/DC Converters Astec Power’s high-efficiency, high-density DC/DC converter family includes isolated and non-isolated Point-Of-Load (POL) devices and spans power levels from 6W to 600W. The range includes low power isolated parts for industrial applications, along with industry-standard isolated solutions in full brick, half brick, ¼ brick, ¹⁄8 brick and ¹⁄16 brick formats. Isolated bus converters address the latest Intermediate Bus Architecture (IBA) designs. Non-isolated parts include POLA™ (Point-Of-Load Alliance) devices and parts dedicated to the requirements of processors and DDR memory. With a focus on reliability, products in the Astec Power DC/DC converter family offer typical MTBF ratings in excess of one million hours. Industrial DC/DC Converters • • • •

Power ratings: 6W - 30W Industry standard packages and pin-outs 1500V isolation 4:1 and 2:1 input voltage ranges

• • • •

Soft encapsulation Protection: OVP, OCP, LVP Remote on/off Operating ambient temperature range: –40ºC to +71ºC (no de-rating)

Industry Standard ‘Brick’ Format • Full range of isolated DC/DC converters in industry standard footprints • Full brick, ½ brick, ¹⁄8 brick, ¹⁄16 brick • 24V and 48V inputs • PFC front ends with family of 300V input high density modules

• Baseplate and openframe construction • Through hole and surface mount options • High reliability and >1 million hours calculated MTBF • High feature content – monitoring, protection, adjustment and control via I2C communications

Non-Isolated Converters Designed to offer customers pin-compatible footprints that provide the same functionality and form factors, members of the POLA alliance manufacture products with the same electrical designs to ensure full interoperability and true second sourcing. Astec Power’s ATH series of industry standard, non-isolated POLA converters are high efficiency devices offering • Input/output voltage options – 3.3V/0.8V - 2.5V – 5.0V/0.8V - 3.6V – 12.0V/1.2V - 5.5V • Output currents: 6A, 8A, 10A, 15A, 18A, 22A, 30A • Auto-Track™ sequencing Bus Converters Astec’s bus converters are specialised industry standard bricks for Distributed Power Architecture (DPA) front ends. Optimised for driving POL regulators, these products operate across a wide temperature range of -40ºC to +100ºC (baseplate) and -40ºC to +85ºC ambient (openframe) and integrate a variety of features including OVP, OTP and on/off enable. • 9V and 12V output versions • Output current range: 10A - 30A

www.arrowne.com/power_supplies

9

C&D Technologies Full Range of Power Conversion Products Meets Requirements ‘from AC to IC’

The C&D Technologies Power Electronics Division has a long history in producing high quality power conversion products, from the smallest SMT DC/DC converters to standard and application-specific AC/DC power supplies.

Power Supplies Products range from standard supplies and front-end modules for Distributed Power Architectures (DPAs) through modular products to cPCI and PCI solutions, as well as application-specific parts for military systems and rugged CATV and telecoms designs. Standard AC/DC Supplies (700W to 2000W) C&D’s standard AC/DC supplies offer power rating options from 700W to 2000W and single- or dual-output options catering for all common voltages. Features include • Power ratings: 700W, 900W, 1000W, 1200W, 1600W, 2000W • Output voltages: 2.5V, 3.3V, 5V, 12V, 15V, 18V, 24V, 28V, 36V, 48V • Universal input voltage range: 90V - 264V • Efficiencies to 92%

• • • • • •

PFC EMI Class A Current sharing Hot plug options I2C options Variety of integrated protection functions

600W AC/48VDC Front-End Module for DPAs The PF600-1 is a high power density 48V AC/DC converter with active PFC that requires very few additional components to implement a full front-end solution for 48V DPAs. • Wide input voltage range: 85VAC - 264VAC • Safety isolated 48VDC output • Small package size: 2.55” x 5.0” x 0.56”

• Active PFC to EN61000-3-2 • Aux (standby) output • DC OK signal

cPCI™ and PCI™ AC/DC and DC/DC Power Supplies The C&D Technologies range of products for CompactPCI applications comprises high reliability, high power density modules including, with a width of just one card slot, the industry’s narrowest 200W units. • AC/DC and DC/DC power supplies – cPCI: 200W, 325W, 350W, 420W, 500W – PCI: 500W • Quad output: 3.3V, 5V, +12V, -12V • Optional IPMI on selected models enables active management through SMbus

• PFC on selected models • Active current sharing functions • Hot swap capable

Rugged Power Supplies Through its Celab range of products, C&D Technologies offers rugged power supply solutions that address the high availability and harsh environment requirements of defence, aerospace, CATV and telecoms applications. Features and options include • Multi-output for high and low voltage • DC and AC inputs • PFC (single- and three-phase) • Safety to IEC 60950 • High density and lightweight

10

• • • • •

EMC to MIL STD 461 MTBF to MIL STD 217 Environmental to MIL STD 810 Rad hard Comprehensive integrated protection functionality

Powering the Supply Chain

C&D Technologies Full Range of Power Conversion Products Meets Requirements ‘from AC to IC’

DC/DC Converters With the addition of Datel branded Point-Of-Load (POL), brick, and bus converters, C&D Technologies now offers the largest range of DC/DC converters from a single manufacturer. Combining reliability, efficiency and cost effectiveness, C&D’s DC/DC converter range covers power ratings from just 0.25W up to 460W and offers every possible solution for delivering power ‘from AC to IC’. The range features isolated and non-isolated (POL) products, single- and multiple-output options, open frame, encapsulated, DIP, SIP and brick style packages, and products designed to deliver high-performance processor and memory support. Output voltages range from 0.8V to 72V and output currents up to 150A are available. Isolated DC/DC Converters C&D’s isolated converter portfolio offers power ratings to 460W, output voltages from 1.0V to 72V, and features single-, dual-, triple- and quad-output models. Datel branded products have significantly enhanced C&D’s selection of high power ¹⁄8, ¼ and ½ brick models. High efficiencies enable full power operation to high ambient temperatures. Low power encapsulated products (mini SIPs, DIPs and SMDs) are among the smallest available, with many using contemporary ceramic substrate and copper leadframe technologies to achieve their small size. • • • • •

Includes Datel-branded product range 0.25W to 460W Single-, dual-, triple- and quad-output 1.0V to 72V SIP, DIP, SMD, ¹⁄8, ¼ and ½ brick formats

Non-Isolated POL Converters C&D’s non-isolated POL products include Datel branded products and technology and expertise gained through C&D’s acquisition of CPS, the former Power Systems Division of Celestica, Inc. Current ratings range from 0.5A to 150A with output voltages from sub-1V to 12V. Input voltages are centred around traditional 3.3V, 5V and 12V rails, with some devices operating from 7.5V to 36V. Standard packages include SMDs, SIPs and ¹⁄8 and ¼ brick formats. Ideal for Intermediate Bus Architectures (IBAs) or as cost-effective conversion solutions in cases where isolation is not required, the C&D POL portfolio includes products dedicated to meeting the power requirements of the latest 32-bit and 64-bit processors and memory ICs. • • • • • •

0.5A to 150A Sub-1V to 12V outputs SMD, SIP, ¹⁄8 and ¼ brick formats 32-bit and 64-bit processor solutions High performance DDR1/DDR2 memory support Z-Series digital power products

www.arrowne.com/power_supplies

11

Tyco Electronics Modular Power Architectures for Industrial Applications

Tyco Electronics power conversion solutions from Arrow provide all of the modules and components needed to rapidly implement the widest possible variety of distributed power architectures (DPAs), including those based on increasingly popular Intermediate Bus Architecture (IBA) configurations. IBA solutions use a ‘single-output’ power supply to generate an electrically secure separate DC voltage, which can then be distributed with low losses, even in systems with large physical dimensions. Tyco products range from AC rectifier and front-end power supplies, to isolated, regulated DC/DC converters, intermediate bus converters (IBCs), and Point-Of-Load (POL) DC/DC converters.

Conventional DPA Architecture

IBA Architecture

EIPS Series, Single Output AC/DC Power Supplies Tyco Electronics’ competitive and reliable EIPS family of RoHS-compliant AC/DC single-output power supplies offers output power from 38W to 150W and generates output voltages of 24V, 12V, or 5V. • • • • • •

Universal AC input (85VAC - 264VAC) Power ratings: 35W, 50W, 100W and 150W 24V, 12V or 5V output voltages Output current from 2.5A to 30A High operating efficiency High reliability

• • • •

International safety approvals EN55022 Class B compliant EN61000-3-2 compliant Cost efficient, compact rack-mountable package with screw terminal connections

High Power Front End Power Supplies Tyco’s range of high power front-end power supplies provides power ratings from 500W to 10kW, allowing designers to address a broad range of industrial, telecommunication and other power system requirements. The range includes rectifiers and modular power supplies, all of which are approved to relevant international safety standards. Key products in the range include • AC3000: 1.5RU tall rectifier providing 3000W at 48V when operating with a nominal 200VAC-240VAC input • CP1800: Compact 1 RU power supply providing 1800W with a nominal 200VAC-240VAC input

12

• 595 rectifier series – 48V outputs and currents to 220A • 596 rectifier series – 24V and 48V outputs and currents from 55A to 137A

Powering the Supply Chain

Tyco Electronics Modular Power Architectures for Industrial Applications

DC/DC Converters Tyco’s DC/DC converter family includes isolated DC/DC converters in a variety of popular formats, intermediate bus converters (IBCs), and POL devices. As a founder member of the Distributed-power Open Standards Alliance (DOSA), Tyco is committed to ensuring compatibility and standardisation in the increasingly fragmented power converter market. Isolated DC/DC Converters Suitable for conventional DPAs and new and emerging IBAs, the Tyco modular power conversion family includes a range of isolated DC/DC converters in sizes ranging from 1” x 1” to half brick formats. Included in the range are a number of 1/8 brick and 1/4 brick format IBCs designed to deliver 9V and 12V intermediate bus voltages. Format

Output Voltage Options

Output Current

1/2 Brick

1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V, 12V, 28V, 52.5V

6A - 70A

1/4 Brick

1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V, 12V

10A - 60A

1/4 Brick IBC

9V, 12V

18A - 36A

1/8 Brick

1V, 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V, 12V

6A - 40A

1/8 Brick IBC

12V

12A - 22A

1/16 Brick

1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V

10A - 25A

1” x 2”

1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V

4A - 12A

1” x 1”

3.3V, 5V, 12V, 15V

1A - 3.5A

Non-Isolated DC/DC Converters Tyco’s Austin Lynx and Austin Lynx II Series of non-isolated DC-DC power modules are designed to deliver ‘big’ power from a small space. Providing output voltages from 3.3V to sub-1.8V, these devices are approved for global use in a wide variety of application categories, and address the low voltage, high current requirements of the latest silicon solutions. The devices are rapidly becoming an industry standard, and are already deployed at critical nodes in many distributed power architectures. Available with a wide range of input voltages, including the new 24V Austin Lynx series, these modules can be used in IBAs as well as conventional DPAs. A typical power architecture may, for example, combine the Tyco EIPS100 AC-DC converter, producing a stable 24VDC output, with individual 24V series Austin Lynx power modules supplying one or more required voltage rails down to 3.3V. When voltages below 3.3V are required, one 24V Austin Lynx module, in series with the AC/DC converter, can be used to convert the 24VDC rail to a lower voltage, such as 5V. This provides the input to further Austin Lynx converters downstream, generating the individual voltages including sub-3.3V rails as required. Austin Lynx Series Family

Input voltage range

Current/Power

Output Voltage

MiniLynx

8.3V - 14V and 2.4V - 5V

3A

0.75V - 5V and 0.75V - 3.3V

MicroLynx

10V - 14V and 3V - 5.5V

5A

0.75V - 5V and 0.75V - 3.3V

MicroLynx II

8.3V - 14V and 2.4V - 5.5V

6A

0.75V - 5V and 0.75V - 3.3V

Lynx

10V - 14V and 3V - 5.5V

10A

0.75V - 5V and 0.75V - 3.3V

Lynx II

8.3V - 14V and 2.4V - 5.5V

10A

0.75V - 5V and 0.75V - 3.3V

SuperLynx

10V - 14V and 3V - 5.5V

16A

0.75V - 5V and 0.75V - 3.3V

SuperLynx II

8.3V - 14V and 2.4V - 5.5V

16A

0.75V - 5V and 0.75V - 3.3V

MegaLynx II

4.5V - 5.5V and 6V - 14V

30A and 25/30A

0.8V - 3.6V and 0.8V - 5.5V

24-Volt Austin Lynx

18V - 30V

50W and 30W

5V - 15V and 3V - 6V

ATL Series

9V - 18V

10A

0.75V - 5V

www.arrowne.com/power_supplies

13

And Power is Just the Start… Industry’s Broadest Linecard Meets Every Need for On-Board and Off-Board Components

Specifying and selecting the right power product is just one element in a successful design. From memory to micros, capacitors to connectors and sensors to switches, there is a host of additional on-board and off-board components and products that the design engineer must source. And, thanks to the industry’s broadest linecard, they are all available from Arrow.

Featuring products from the industry’s leading manufacturers, Arrow’s linecard encompasses everything from the smallest resistor to the latest advanced display technology. This wide range of products, coupled with extensive in-house product knowledge and engineering expertise, allows us to act as a true single source for almost any application requirement. Semiconductors • Microcontrollers and Microprocessors • Memory • Logic • Power & Discrete • Analogue • Optoelectronics

Electromechanical and Sensors • Relays • Switches • Vibration, tilt and flow sensors Circuit Protection • Fuses • Varistors • Filters

Passives • Capacitors • Inductors • Resistors • Crystals

Displays • Colour STN • Colour TFT • Custom LCD panels • Character and graphic LCDs • Touch screens • OLEDs

Interconnect • Connectors • Sockets • Terminal blocks • Cable and Wire

Thermal Management • Fans • Heatsinks

And Even More Power… In addition to the franchises listed on previous pages, Arrow also offers the full range of Power-One products, including: AC/DC Power Supplies • Chassis mount – Single-, dual- triple- and quad-output – Modular including medical and high-power • CompactPCI • DIN rail • Power-over-Ethernet (PoE) • Rectifiers and DC energy systems

14

DC/DC Converters • Isolated DC/DC converters – Single-, dual-, triple- and quad-output – SMT and thru’-hole – IBA bus – PoE • Non-isolated POL converters • Z-One Digital IBA converters

Powering the Supply Chain

And Power is Just the Start… Industry’s Broadest Linecard Meets Every Need for On-Board and Off-Board Components

Power Supplies

AC rectifiers / Energy systems

•

•

•

•

•

Hot swap / Dual redundant front ends

•

•

•

•

•

Low Power AC/DC

•

•

•

•

Mid-power AC/DC

•

•

High power AC/DC

•

•

Configurable AC/DC

•

•

Medical AC/DC

•

•

External AC/DC

•

•

Brick AC/DC PFC modules

•

•

•

Brick DC/DC converters

•

•

•

•

•

Intermediate Bus Converters

•

•

•

•

•

Z-one digital IBA Products

•

Industrial DC/DC converters

•

•

POLA™ POL devices

•

•

•

•

DOSA POL devices

•

Silicon support (DRAM, Processors)

•

•

•

•

POL devices

•

•

•

•

•

•

•

•

•

•

•

•

•

Power over Ethernet CompactPCI hot swap PSU DIN Rail PSU EMI filters (on-board)

•

•

Customer specific solutions

•

•

www.arrowne.com/power_supplies

15

Return to: Arrow Northern Europe Edinburgh Way, Harlow Essex, CM20 2DF UK

Arrow Sales Offices BEDFORD Arrow Electronics (UK) Ltd St Martins Business Centre Cambridge Road Bedford MK42 0LF Tel: 01234 270027 Fax: 01234 791501 E-mail: [email protected]

MANCHESTER Arrow Electronics (UK) Ltd 6th Floor, St James Buildings Oxford Street Manchester M1 6EJ Tel: 0161 233 8500 Fax: 0161 233 8501 E-mail: [email protected]

BRISTOL Arrow Electronics (UK) Ltd Baleen House Whale Wharf Business Park Littleton upon Severn South Gloucestershire BS35 1NP Tel: 01454 280080 Fax: 01454 280081 E-mail: [email protected]

MIDLANDS Arrow Electronics (UK) Ltd First Floor, 6 Thorpe Way Grove Park Enderby, Leicester LE19 1SU Tel: 01162 456620 Fax 01162 456621 E-mail: [email protected]

CRAWLEY Arrow Electronics (UK) Ltd Building 5F Mill Court Spindle Way Crawley West Sussex RH10 1TT Tel: 01293 558900 Fax: 01293 558901 E-mail: [email protected]

READING Arrow Electronics (UK) Ltd Unit 3, Bennet Court Bennet Road Reading, Berks RG2 0QX Tel: 0118 9633800 Fax: 0118 9633801 E-mail: [email protected]

DUBLIN Arrow Electronics (Ireland) Ltd 10A Second Floor, Beckett Way, Park West Business Park Nangor Road Dublin 12 Tel: +353 (1) 6298700 Fax: +353 (1) 6298701 E-mail: [email protected] HARLOW Arrow Electronics (UK) Ltd Edinburgh Way Harlow Essex CM20 2DF Tel: 01279 626777 Fax: 01279 455777 E-mail: [email protected]

SCOTLAND Arrow Electronics (UK) Ltd Suite 1A, Willow House Kestrel Way The Strathclyde Business Park Bellshill, N Lanarkshire ML4 3PB Tel: 01698 464030 Fax: 01698 464031 E-mail: [email protected] SOUTHAMPTON Arrow Electronics (UK) Ltd Suite P Epsilon House Enterprise Road Chilworth Science Park Southampton, Hampshire SO16 7NS Tel: 0118 9633800 Fax: 0118 9633801 E-mail: [email protected]

www.arrowne.com/power_supplies