Plasti-fab, Inc. Composite And Fiberglass Product Brochure

Flow Control Products Slide Gates • Heavy Duty Titeseal™ Slide Gates • Wedging Titeseal™ Gates • Stop Gates • Downward Opening Weir Gates • Flap Gates • Stop Logs

Flow Measurement Products

Packaged Metering Manholes • Mag. Meter Manholes • Parshall Flumes • Palmer-Bowlus Flumes • Trapezoidal Flumes • H Flumes • Cutthroat Flumes • Montana Flumes • Nested Flumes • V-Notch Weirs

Flow Moderation Products

Diversion Manholes • Energy Absorbing Manholes • Storm Water Manholes • Scum Skimmers • Troughs and Launders • Weirs and Baffles

Premium Rugged Shelters

Rib Wall Shelters • Sampler Shelters • Instrument Shelters • Chlorinator Shelters • Flat Wall Shelters • Equipment Covers

Biofilter Odor Control Clean•Aire BIOSYSTEM™

Plasti-Fab products are fabricated from highly corrosion resistant composite fiberglass reinforced plastic (FRP). Plasti-Fab is recognized around the world as an experienced innovator, providing composite solutions in municipal and industrial applications for the water and wastewater industry.

Flow Control For over forty years, Plasti-Fab has been supplying composite FRP Gates for highly corrosive water environments. All Plasti-Fab Gates totally encapsulate the internal reinforcing structure. All composite Gates offer high corrosion resistance, low maintenance, and no need for wall thimbles due their reduced weight characteristics. In addition, they are non-conductive, non-magnetic, and non-binding. Composite FRP material is pound-for-pound much stronger than steel. Gates are engineered and built to order.

®

®

Heavy Duty Titeseal

Wedging Titeseal

• Exceeds AWWA C-563 leakage standard of 0.1 GPM per wetted foot. • Designed for head pressures in excess of 50 feet. • Adjustable Wedge allows maximum leakage reduction. • Seals are replaceable without dewatering channel.

• The best technology available for emergency shut-off and spill containment. • Maximum leakage of less than 0.03 GPM per wetted foot. • Seals are replaceable without dewatering channel. • A complete composite FRP unit.

Stop Logs

Flap Gates

• Maximum leakage of less than 0.2 GPM per wetted foot when installed in Plasti-Fab Guide Frames. • Engineered for new or existing guide structures. • Dual Neoprene seals on logs. • Two-point seals on Guide Frames.

• • • •

Minimal head loss. Rounded or rectangular styles available. Wall and Flange mounted options. Neoprene seals.

Stop, Slide, & Weir gates • Individually molded to exact specifications. • Rugged light-weight gates are ideal for stopping and controlling water flow. • Multiple options available, such as Neoprene seals, downward-opening, V-notches, and tandem stems. • FRP or Stainless Steel Guides are engineered for all applications, including Surface Mounting, Embedding, or In-Channel Mounting.

Flow Measurement As a leader in the flume fabrication revolution that began over forty years ago, Plasti-Fab has thousands of flumes installed in corrosive environments around the world. All flow measurement products integrate a premium grade marine gel coat providing a smooth, non-porous, surface for enhanced flow passage, and long-term UV protection.

Parshall Flumes

End Adapters for Easy Installation To Pipes

Plasti-Fab Parshall Flumes have a wide flow range, providing the ability to capture variable low and peak flow readings in a single location. They range from 1-inch to 15-foot throat sizes, and provide great resolution. Integral Gages are included. Fully customizable applications include Nested and Staged Flumes, Magic Bottoms, Inlet & Outlet Adapters, Wingwalls & Bulkheads, along with a full range of accessories.

Palmer-Bowlus Flumes Plasti-Fab Palmer-Bowlus Flumes have a wide-throat and shortlength, making them ideal for pipe hookups. They are economical and easy to install in manholes and pipelines. The sizes range from 4-inch to 72-inch throats, and they have a high submergence tolerance. Integral gages are included. Fully customizable applications include Nested Flumes, Insert Flumes, Integral Approaches, and Bulkheads, along with a full range of accessories.

Trapezoidal Flumes Plasti-Fab Trapezoidal Flumes are low profile, and provide excellent low-flow resolution. This provides the ability to obtain repeatable, accurate measurement in flows down to 1 GPM to meet stringent requirements. They fall into two groups, the 60* V, and the larger Trapezoidal Flumes. Integral gages are included. Fully customizable applications include Adapters with Pipe Stubs or Caulking Collars, and Access Boxes, along with a full range of accessories.

H-Flumes Plasti-Fab H Flumes have the widest flow range, and a high tolerance for velocity. This means that they have a useable range of more than 100:1, making them ideal for applications such as storm water measurement. They range in size from 0.4 to 4.5 feet in depth. Fully customizable applications include End Walls for Approach with Pipe Stub or Caulking Collar or staged to bolt to a vault wall, and Tranquilizing Racks, along with a full range of accessories.

For Our Complete Catalog Visit Us Online at www.plasti-fab.com

Flow Moderation Plasti-Fab has a variety of Flow Moderation Products designed for corrosive environments. Composite FRP products offer a low-cost, long-lasting alternative to metal and concrete products, are pound-forpound much stronger, and require less cleaning and maintenance.

Diversion Manhole

Energy Absorbing

Integral Gates

The Manhole and composite Gates are fabricated into an integral unit at the Plasti-Fab factory for a fast and simple installation on site. Gates can be handpull or lift operated.

STORM Manhole

Plasti-Fab designed this unique system to trap incoming solids in removable baskets, and to separate oil and water. Baskets are removable, and easy to maintain. Manholes can be provided with baskets and oil/water separators individually, or together.

An energy absorbing plate calms the velocity of the incoming flow. The integral wing walls then funnel the lower velocity water into the exit pipe to continue on to a flume, or downstream system, at a slower velocity.

Skimmers

Plasti-Fab Design Includes an Adjustable Seal

Composite Scum Skimmers are available for existing and new basin applications. Plasti-Fab is experienced in designing systems for diverse installation criteria, and will provide that knowledge and expertise on every project.

Troughs & Weir Plates

Floating Decanters

Plasti-Fab fiberglass Launders and Backwash Troughs are designed for clarifiers and gravity filter systems in water and wastewater treatment plants. These long lasting Troughs are available in a wide range of sizes with flat or rounded bottoms. Weir Plates and Scum Baffles are available for FRP or concrete Troughs.

Plasti-Fab Floating Decanters offer a unique solution to control water levels. Our built-in baffle plate allows the water to draw off while leaving any surface debris. No need to determine the settled sludge level. A dependable hands-off operation.

Premium Rugged Shelters Plasti-Fab Shelters are the highest quality construction available, and are protected from UV Damage by a premium grade marine grade gel coat on all exposed surfaces. Engineered to meet all applicable codes. CUSTOMIZED FOR YOUR APPLICATION! All Plasti-Fab shelters are available with a full range of accessories, and a variety of configurations to meet all applications. All hardware is heavy-duty stainless steel.

Ribwall

Sampler

Flat Wall

Biofilter Odor Control Plasti-Fab Clean•Aire BIOSYSTEM™ odor control units use Bio•Reaction Industries Bio•AIRSPHERE™ media. These patented bio-oxidation systems achieve the highest removal efficiency of VOCs for any air phase biological treatment system in the world.

Clean•AIRE bioSystem™

• Small Footprint • Bio•AIRSPHERES™ Prevent Compaction • Uniform Airflow & Temperature Distribution • Modular, Flexible & Expandable Design • Automated Controls • Stable Microbial Community

PLASTI-FAB Inc. PO Box 100 Tualatin, Oregon 97062-0100 (503)692-5460 Fax:(503)692-1145 www.plasti-fab.com

No Costly Chemicals Long Media Life Sustainable Technology

Compact Footprint Low Maintenance Complete Breakdown Of Compounds

Plasti-Fab Odor Control unit uses the patented Bio•AIRSPHERE™ design to maximize surface area, prevent compacting and extend the service life of the Bio-media. Contact Your Local Plasti-Fab Representative http://www.plasti-fab.com./fiberglass-manufacturingrepresentatives

Broc. No. GP-1.04.09 - Copyright© - 2009 Plasti-Fab Inc. - Plasti-Fab® is a trademark of Plasti-Fab Inc.

Flow Measurement Plasti-Fab Manhole Barrels are watertight, one-piece construction, with an integral bottom. They weigh less than 10% of comparable concrete manholes, and are extremely resistant to chemicals, saltwater, corrosive soils, ground water, and electrolysis. Manhole bottoms are a dual-layer construction to prevent oil canning, and provide a flat installation surface. PMM tops may be designed for steel covers to meet H-20 highway loading, with hinged FRP lids and locking hasps, aluminum for water/gas tight applications, or customized. The Manhole interior is premium grade marine white gel coat that provides a smooth non-porous surface to resist bacteria for a cleaner workspace, and to allow for maximum illumination. All hardware is heavy-duty stainless steel. Anchor tabs are mechanically fastened to the barrel to ensure a secure installation. Pipe stubs are built to match the ID and OD of the mating pipe. Invert elevations can be adjusted to meet the changes in elevation of the pipe in the field. Manholes can be fully customized with a full range of accessories.

Packaged Metering Manholes Fiberglass Barrel is Watertight OnePiece Construction

Full Range of Integrated Flumes Available

Inlets and Outlets are Molded into the Package

Integral Flume Internal Ladder The Plasti-Fab Packaged Metering Manhole (PMM) was an industry first, and remains the most complete and easy-to-install flow measurement package on the market. The full range of flumes may be integrally molded into the PMM, along with inlet and outlet adapters, pipe stubs, and monitoring accessories for a complete package.

Mag Metering Manholes

Neoprene Boots Plasti-Fab Magnetic Flow Meter (Mag Meter) Manholes provide the same benefits as the PMMs using a Mag Meter instead of a Flume. Customer supplied Mag Meters are expertly installed at Plasti-Fab, making the field installation quicker and more convenient.

Discrete Appearance

Visit Us at www.plasti-fab.com to see our entire product catalog