Pi_cassida Fm Compound Sg 720.pdf

CASSIDA FM COMPOUND SG 720 High performance extreme pressure grease for food and beverage processing equipment

Plain Bearings

Extreme Pressure

Slideways

NSF registered

Description CASSIDA FM COMPOUND SG 720 is a fully formulated high performance, semi synthetic, viscous lubricant specifically developed to meet the demands of heavily loaded journal bearings in sugar mills. It is registered by NSF (Class H1) for use where there is potential for incidental food contact.

Certifications and Specifications ▪ NSF H1

Performance Features ▪ Outstanding extreme pressure and antiwear properties. ▪ Excellent corrosion protection ▪ Low pourpoint ▪ Resist water and juice washout due to high viscosity and tackiness ▪ Solvent and asphalt free

Applications ▪ Designed for heavily loaded journal bearings in sugar mills operating in extreme conditions under heavy loads and continuous operation.

Handling and storage All food grade lubricants should be stored separately from other lubricants, chemical substances and foodstuffs and out of direct sunlight or other heat sources. Store at room temperature. Provided that the CASSIDA FM COMPOUND SG 720 | CASSIDA US | 2017-08-5, page 1/2 Fuchs Lubricants Co. FUCHS LUBRITECH Division

17050 Lathrop Ave Harvey, IL 60426 Tel. +1 (0) 708 333-8900

[email protected] www.fuchs.com/us +49 (0) 6301 3206-0

product has been stored under these conditions we recommend that the product be used within 3 years from the date of manufacture. Upon opening a pack, the product must be used within 2 years (or within 3 years of the date of manufacture, whichever is sooner).

Typical characteristics Property

CASSIDA FM COMPOUND SG 720

Unit

Test Method

Colour

Off White

Density

0.87

Kg/l

ASTM D 4052

Pour Point

-10 (14)

°C (°F)

ASTM D 97

Flash Point

250 (482)

°C (°F)

ASTM D 92

4-Ball Weld

800

Kgf

ASTM D 2783

4-Ball Scar Diameter

0.4

mm

ASTM D 4172

4-Ball LWI

154

Kgf

ASTM D 2783

Rust Test, Distilled Water

PASS

ASTM D 665

Copper Corrosion

1b

ASTM D 130

As far as we know above information reflect the current state of knowledge and our research. The above infromation cannot, however, be taken as an assurance about the properties nor as a guarantee of the suitability of the product for the individual case in point. Before using our products the purchaser must, therefore, check the suitability and be satisfied that the output will be satisfactory. Our products are continually being up-dated. We reserve the right, therefore, to alter the information of this product information at any time and without prior announcement. We are specialized in developing products for extreme tribological problems in cooperation with end users. FUCHS LUBRITECH provides service and individual advice. Please contact us! E-Mail: [email protected]

CASSIDA FM COMPOUND SG 720 | CASSIDA US | 2017-08-5, page 2/2 Fuchs Lubricants Co. FUCHS LUBRITECH Division

17050 Lathrop Ave Harvey, IL 60426 Tel. +1 (0) 708 333-8900

[email protected] www.fuchs.com/us +49 (0) 6301 3206-0