Masterseal® 930 (formerly Known As Masterflex® 3000)

MasterSeal® 930 (Formerly known as Masterflex

®

3000)

Thermoplastic Joint Tape for Expansion and Construction Joints

DESCRIPTION OF PRODUCT

Roofs and terraces Expansion joints together with sealant application ● Watertightness of dynamic cracks on the structures ● ●

MasterSeal® 930, TPE based joint tape desinged for watertightness of expansion and construction joints. MasterSeal® 930 is highly elastic, rootproof and chemically resistant.

FEATURES AND BENEFITS WRAS Approval - “Suitable for use in contact with Potable Water”. BS 6920 : 2000

Easy to apply. User friendly, heat welding. ● Long lasting elasticity and service life. ● Keeps elasticity even in low temperatures. ● Resistant to tear, wear and abrassion. ● Root resistant. (FLL certified) ● Resistant to bacteria and the deformation of chemicals attacks. ● Resistant to ozone and UV rays. ● ●

FIELDS OF APPLICATION Above and below ground applications Foundations and curtain walls ● Pools ● Treatment plants ● Tunnels ● Balconies and parapet joints ● ●

MasterSeal® 930 (Formerly known as Masterflex

®

3000)

Thermoplastic Joint Tape for Expansion and Construction Joints

APPLICATION PROCEDURE

MasterSeal® 930 MasterBrace® ADH 1406

MasterBrace® ADH 1406

Surface Preparation Substrates must be sound and free of dust, dirt, laitance, paints, oils, grease, curing compounds, or any other contaminants. Verify substrate has properly cured. Concrete should obtain 80% of design strength, typically achieved within 3-14 days. Irregularities on the substrate must be repaired with MasterBrace ® ADH 1406. MasterSeal® CR 170/171, polysulphide sealant application in the expansion joints is recommended prior to MasterSeal ® 930 application. APPLICATION Mix MasterBrace ® ADH 1406 adhesive thoroughly, following the guidelines. Apply the well-mixed MasterBrace® ADH 1406 on both sides along the joint or crack on the prepared substrate, preferably with a notched trowel or spatula. Layer thickness should be about 1-2 mm. When sealing cracks, or narrow joints the MasterSeal® 930 should not be fully bonded on the joint. Centre line of the tape must be kept clean for elongation, expansion and contraction.

MasterSeal® 930 MasterBrace® ADH 1406

MasterBrace® ADH 1406

MasterSeal® CR 170/171

MasterSeal® 930 MasterBrace® ADH 1406

MasterBrace® ADH 1406

MasterSeal® 930 MasterBrace® ADH 1406

MasterBrace® ADH 1406

WATCH POINTS line of MasterSeal® 930 must be kept clean for elongation. ■ It is recommended to apply sealant (MasterSeal® CR 170/171) in expansion joints prior to MasterSeal® 930 application. ■ Liquid applied waterproofing coatings must be applied over MasterBrace® ADH 1406 for proper watertighness. ■ Center

MasterBrace® ADH 1406 MasterSeal® 930

MasterSeal® 930 (Formerly known as Masterflex

®

3000)

Thermoplastic Joint Tape for Expansion and Construction Joints

CLEANING OF TOOLS See MasterBrace® ADH 1406 technical data sheet.

the product is used other than advised and/or out of instructions regarding the place and the method of use. This technical form is valid only till a new version is implemented and nullifies the old ones.

PACKAGING

Contact Information

20 mt rolls

BASF Türk Kimya San. ve Tic. Ltd. Şti. Yapı Kimyasalları Bölümü Tel: 0216 570 34 00 Fax: 0216 570 37 79 Mail: [email protected] www.master-builders-solutions.basf.com.tr

STORAGE Store in a cool and dry warehouse away from direct sunlight. SHELF LIFE No shelf life limitation under appropriate storing conditions. Health and Safety Precautions Avoid contact to eyes and mouth during storing and application. Consult a physician urgently if such a contact occurs. Food and drink must be kept outside the application areas. Must be stored away from children. Please look at the Material Safety Data Sheet for detailed information. DISCLAIMER The technical information given in this publication is based on the present state of our best scientific and practical knowledge. BASF Türk Kimya Sanayi ve Tic. Ltd. Şti. is only responsible for the quality of the product. BASF Türk Kimya Sanayi ve Tic. Ltd. Şti. is not responsible for results that may occur because

® = Registered trademark of the BASF-Group in many countries of the world MasterSeal 930 Technical Data Sheet - Issue Date: 02/2016