Parts Of Motherboard

PARTS OF MOTHERBOARD

MOTHERBOARD

THE TWO BLACK CONNECTORS are old ISA slots, now becoming obsolete, that can be useful to connect some old boards, i.e. a LAN board that we keep in the "old but useful devices" drawer.

THE FOUR WHITE CONNECTORS are the PCI slots (numbered from 1 to 4 from left to right). Most of the present boards but the graphics ones, have this kind of connection. The PCI4 is normally only used if the second ISA is not occupied (although electrically both can be used).

THIS IS THE AGP SLOT. it is only used for graphics boards (where the monitor is plugged). Nowadays, graphics boards are manufactured almost exclusively with this kind of connection

THIS IS THE POWER SUPPLY CONNECTOR.

THIS IS THE CPU SOCKET that in this motherboard has to be Intel socket 370 type (PPGA or FCPGA). AMD processors need another kind of motherboard; they are not interchangeable (in this motherboard one cannot even plug Pentium III slot-1)

the RAM sockets or connectors: the part that is guilty (when short) that computers move as turtles. The three in the photograph at the left are DIMM (black with little white levers at the ends).

DIMM slots and four empty slots (white) of SIMM memory. When purchasing memories to increase the size (upgrade), one has to report which kind of slot, base speed of CPU clock (for instance, 66, 100 ó 133 Megahertz), and, if possible, show the motherboard's handbook.

THIS IS THE BIOS THAT KEEPS THE CODE PROGRAM, WHICH STARTS THE PC BEFORE THE OPERATING SYSTEM LOADS.

THE BATTERY. That helps keep the BIOS configuration, clock, when the computer is off. Under the battery, in the long black connector, we connect the internal loudspeaker, reset, LED's ...