Owls Integrated Sensor Holder - Sh-0812

OWLS 120 SH-0812

Version: 1.0 Dated: 01/2007

SH-0812 INTEGRATED SENSOR HOLDER Grating

Handle (Stainless Steel)

2

Cuvette body

"O" ring

Screw

(PEEK)

OW Sensor Chip Cuvette stage (stainles steel)

1

3

All dimension in [mm]

Integrated sensor holder with flow through cuvette made from PEEK with Kalrez O ring

Model: SH-0812

Description:

The glass sensor chip (size 8mm x 12 mm) is placed on the sensor holder and tightened to its sealing O-ring. The sensor holder forms a cuvette above the glass sensor . The sensor holder is made from biocompatible PEEK material, the O ring is made from Kalrez and the tubings are made from Teflon. The glass sensor chip and the sensor holder form an integrated unit, which is placed in the OWLS instrument during measurement. Integrated sensor holders with different cuvette volumes are available.

1 2 3

Type SH-0812-01 SH-0812-03 SH-0812-08

Depth [mm] 0.1 0.3 0.8

MicroVacuum Ltd. H-1147, Kerékgyártó u. 10. Budapest, Hungary Web: http://www.owls-sensors.com/

E-mail: [email protected]

Volume [µl] 1.5 4.5 12

Area [mm2] 15.1

Phone: + 36 1 252 1991; +36 1 467 0108

Fax: +36 1 221 7996

Copyright @ Microvacuum, 2006