Owls 120 Sis-03

OWLS 120 SIS-03 (OPTION)

Version: 1.0 Dated: 01/2007

SIS-03 SAMPLE INJECTION SYSTEM

Position LOAD Peristaltic Pump

Injection valve Waste

Selection Valve

Waste Sample Loop

Sample Syringe

Needle Port

Pump Control Unit

Out to OWLS Sensor Holder Buffers

Position INJECT Peristaltic Pump

Injection valve Six position selection valve

Waste Waste

Sample Syringe Sample

Needle Port

Loop

Pump Control Unit

Out to OWLS Sensor Holder Buffers

Model: OWLS SIS-03 (option)

Stand Alone Sample Injection System with Peristaltic Pump

Description: This subunit is supplying the buffer solution and/or the analyte to the flow-through cuvette. The required fluid flow rate is adjusted by the variable speed peristaltic pump [2] (REGLO-E Digital) using the front panel of the Pump Control Unit (REGLO-E MS/CA1-12). The displayed value is in ml/min (with the tube dimension used in our system). The detailed description of the pump panel control functions is given in the separate manual. Three bottles of buffers can be connected to the system and the actual buffer can be selected by the Selection Valve.

MicroVacuum Ltd. H-1147, Kerékgyártó u. 10., Budapest, Hungary Web: http://www.owls-sensors.com/;

Phone: + 36 1 252 1991; +36 1 467 0108

E-mail: [email protected]

Fax: +36 1 221 7996

Copyright @ Microvacuum, 2007