Network Settings

Dear Yunna, Below is the Network settings for the CP650 (2.3.4.4) and ST100. Please verify that all the Network settings as below:

1) The CP650 Network settings:

2) ST100 IP Address is set to: 192.168.1.200

3) ST100 Subnet is set to: 255.255.255.128

4) ST100 Gateway is set to: 192.168.1.129

5) ST100's CP650 Address is set to: 192.168.1.132

6) Once all the network settings are set like above and the GX520 computer is rebooted, all the changes made will become permanent in the ST100. And when a film is played that's been loaded on the GX520, you should see the CP650 and ST100 as connected below:

Best regards, Norman J. Cerda Customer Support Engineer, Cinema Dolby Laboratories, Inc. 100 Potrero Ave. San Francisco, CA 94103, USA T 415-645-5220 F 415-645-5000 www.dolby.com | [email protected]