(Cisco ID: CSCO11253350) Mohd. Abdullah Siddiqui
Email:
[email protected] Mob: (+966)-533609433
Career Objective To obtain high level of excellence in Implementing & designing of Computer networks using Cisco products and to utilize myself as a resource to handle all kind of challenging jobs by constantly upgrading my knowledge and skills.
Key Technical Specification Listed below are my areas of Technical expertise -:
Routing & Switching Install, configure, and operate simple routed LAN, routed WAN, Switched LAN networks. Designing IP addressing scheme – using subnet Configuring Routers (IOS based), Switches (Set and IOS based) Configuring Static, Default Routing & dynamic Routing Protocols like RIP, IGRP, EIGRP NAT (Network Address Translation). Upgrading Cisco Switches and Routers IOS Password recovery for Cisco Switches and routers. Implementing Gateway Redundancy Protocols Like HSRP Implementing VTP & VLANS Implementing Trunk using Dot1q and ISL STP, RPVST+, Additional STP features such as Root Guard, Loop Guard, BPDU Guard, Port-Fast, Backbone-Fast, Uplink-fast, BPDU Filter Implementing UDLD Implementing Port-channeling Implementing Inter-Vlan-Routing Implementation of CiscoWorks for network management Documentation: Microsoft Visio PRTG & MRTG Network Monitor enables us to monitor network computers and devices including routers, switch. TFTP Server, FTP Server IOS : Version 12.2(18)SXF7 , cat4500-entservices-mz.122-31.SGA9 , c2950-i6q4l2-mz.12122.EA1, c3750-ipbase-mz.122-35.SE5. etc. Implementation of Stacking Cisco Switches Implementation of DHCP Snooping Troubleshoot Campus Network
Wireless Cisco Unified wireless communication Infrastructure Cisco Aironet Access-Points in LWAPP & Autonomous mode Integrating wireless network with LDAP, Active directory and Cisco Secure ACS Experience on Cisco wireless controller 4402/4404, Location appliance, Cisco WCS
Video conference Tandberg Border controller, Tandberg h.323 gatekeeper and Tandberg Endpoints
Network Security Implementing security features on Cisco ASA 5540 Tacacs+ configuration on Cisco Secure Access Server
Technical Qualification CCNA (Cisco Certified Network Associate) CCNP (Cisco Certified Network Professional) Cisco ID: CSCO11253350
Professional Qualification Bachelor of Technology in Computer Science & Engineering, 1st Div, 2000 Institute Of Engineering & Technology, Luck now, U.P, India.
Work Experience Total Years of Experience: 9 years Current Location: King Faisal University, Al-Ahsa (K.S.A)
Summary of Skills and Experience
1. June, 2008 – Till now (International Turnkey System, Riyadh, K.S.A) At present, I am working for King Faisal University, Al-Ahsa through International Turnkey System, Riyadh, K.S.A as a Network Engineer. My responsibilities included here identify issues and risks and propose priorities of problem resolution and also included managing small enhancements in Campus Network. Work with team to escalate and/or resolve/troubleshoot technical issues. Actively participate in requirement gathering for all future enhancements for Campus Network, functional specifications & participate in the technical specification documentation process. Verifying technical specification and preparing the reports accordingly of new projects implemented by different companies (BT Al-Saudia, Al-Rumaih etc.) for King Faisal University. Technologies using:
Cisco Router: Routers 3700,3600, 2600 Cisco Switches: Catalyst 6513,6509,4506,4503, 3550,3560, 3570 , 2960, 2950, 2940
Layer 2 technologies: PVSTP, RPVSTP, VLAN, VTP , Dot1q, Port-Channel, Trunking, BPDU Guard, Root Guard, Loop Guard, PortFast, BackboneFast, BPDU Filter, UDLD.
Layer 3 Technologies : Inter-vlan Routing, HSRP, StaticRouting, Access-list, EIGRP
Remote Access Technologies: PRI(Primary Rate Interface), WIRELESS, Security : Cisco ASA 5540 , Cisco Secure Access Server Wireless : Wireless controller(4400), Wireless Control System(WCS),Wireless Location appliance, Aironet Access points
Video Conference: Tandberg End Points, Tandberg Management suite and Gatekeeper
2. Oct, 2004 – May, 2008 (National Development International, K.S.A) I was working as a Cisco Product Engineer, in National Development International, K.S.A. Here mine responsibility was related to provide technical support to salesmen as well as company’s customers Providing Solution related to Cisco Products Trouble shooting & monitoring for Router in RIP (Routing Information Protocol), IGRP (Interior Gateway Routing Protocol), and EIGRP (Enhanced Interior Gateway Routing Protocol) Trouble shooting & Monitoring for Router in EIGRP, HSRP (Hot Standby Redundancy Protocol). Designing, Implementing, Trouble shooting and Managing Virtual Local Area Network.
Install, configure, and operate simple routed LAN, routed WAN, Switched LAN Networks.
3. Nov, 2000 – Aug, 2004 (Shah Computech, Mumbai, India) Job profile:
Configuring Router w/Cisco routing protocols RIP, IGRP, and Static Routes. Trouble shooting & Monitoring for Router in, RIP, IGRP, Static Routes, environment Configuring & Trouble shooting basic Frame Relay, ISDN. setting Setting access-list and passwords in Cisco routing environment Working with TCP, IP, UDP, ARP, RARP, and Sub netting Basic configuration of Cisco routers for remote access Responsible for Installation & maintenance of LAN/ WAN Network Client side troubleshooting and maintenance of NOC. Actively participated in all phases of networking projects viz. need /requirement analysis, network design, product selection and evaluation, technical and commercial negotiations, network implementation and management. Trouble shooting in WAN And LAN problems Technologies used:
Cisco Router: Routers 2500, 2600 ,3700 Cisco Switches: Catalyst 1900 & 2950,3550,3750 Remote Access technologies: PRI, WIRELESS. Routing Protocols: Static routes, rip Layer 2 Protocols : STP, RSTP, dot1q,ISL,PAGP
Personal Information:
Date of birth : 15-FEB-1975 Father’s Name : Mr. Mohd Asif Siddiqui Sex : Male Marital Status : Married Nationality : Indian Education : Bachelor of Technology Languages Known : English, Urdu and Hindi Address : 4/1166 New Sir Syed Nagar, Aligarh, U.P, India
The above-mentioned information is correct to the best of my knowledge.
Mohd. Abdullah Siddiqui