Msds Colacor The

Material Safety Data Sheet Cola®Cor THE Effective Date: 01-02-2008 Page 1 of 3 Emergency Telephone # 423/837-8800 Chemtrec 800/424-9300

Colonial Chemical, Inc. 225 Colonial Drive S.Pittsburg, TN 37380 Product Name: Prepared by: Direct Phone: Chemical Name:

SECTION I – PRODUCT INFORMATION Cola®Cor THE File: THE Scott Smith 423/837-8800 PROPRIETARY

THE CHEMTREC NUMBER IS TO BE CALLED ONLY IN THE EVENT OF CHEMICAL EMERGENCIES INVOLVING A SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT INVOLVING CHEMICALS. Emergency Overview: May cause eye and skin irritation. SECTION II – HAZARDOUS INGREDIENTS Ingredients CAS # NONE SECTION III – PHYSICAL DATA Boiling Point (°F): Vapor Density: Specific Gravity: Molecular Weight: pH Value: Appearance:

>200°F NA 0.917 pH (10% Aqueous, 50:50 IPA/H20) 8.0 Clear Liquid

SECTION IV – FIRE AND EXPLOSION HAZARD DATA Flash Point, F, >200°F Pensky-Martens Closed Cup ASTM D93 Explosive Range: N. AV Extinguishing Media Dry chemical, foam, or carbon dioxide. Special Procedures None SECTION V – REACTIVITY DATA Stability: Stable Hazardous Polymerization: Will not occur Incompatibility (Materials to Avoid): Avoid contact with strong oxidizing agents Decomposition Products: None known Conditions to Avoid: Extra high temperatures

Cola®Cor THE

Page 2 of 3

SECTION VI – HEALTH HAZARD DATA EMERGENCY OVERVIEW: May cause some eye and skin irritation like soap. Mist may irritate mucous membranes. Effects of Overexposure: EYES – Prolonged contact can cause irritation, redness, blurred vision. SKIN – Prolonged contact can cause irritation. FIRST AID: Eye Contact - Immediately flush with copious amounts of water for at least 15 Minutes. Consult physician Skin Contact- Immediately flush with copious amounts of soap and water for at least 5 minutes. If irritation persists, contact physician. Launder contaminated clothing before reuse. IngestionContact physician or poison control center. If victim is conscious and able to swallow, quickly give milk or water to dilute. Do not give sodium bicarbonate, vinegar, or fruit juice. Never give anything by mouth to an unconscious person. InhalationMove to fresh air. If necessary, give oxygen, artificial respiration. Contact physician. SECTION VII – SPECIAL PROTECTION INFORMATION OCCUPATIONAL EXPOSURE LIMITS: None Respiratory Protection: Not required Ventilation: Not required – misting operations may require adequate ventilation. Eye Protection: Wear safety glasses where no contact with the eye is anticipated. There is the possibility of splashing or other contact with the eyes. Protective Gloves: Impervious. Other Protection: Wear protective clothing to prevent skin contact. SECTION VIII – SPECIAL PRECAUTIONS ACCIDENTAL RELEASE MEASURES: For large spills – soak up with sand or sweeping compound and dispose as solid waste. For small spills – flush to industrial sewer. HANDLING & STORAGE – Handling – spilled material is quite slippery. Storage – Keep container closed when not in use. SECTION IX – REGULATORY INFORMATION TSCA: Listed in TSCA inventory. SARA TITLE III, Section 312, 313: None CERCLA RQ AMOUNT: None SECTION X – WASTE DISPOSAL Waste Disposal Method: In accordance with local, state and federal regulations.

Cola®Cor THE

Page 3 of 3 SECTION XI – TOXICOLOGICAL INFORMATION

NONE SECTION XII – ECOLOGICAL INFORMATION NONE SECTION XIII– TRANSPORTATION INFORMATION Proper Shipping Name: Liquid soap, N.O.S. DOT: DOT Hazard class: None

ID# None

Classification: None

ID# None

IATA: IMO: HM 181: Canada: TDG Class: None TDG Shipping Name: None

ID# None

SECTION XIV-OTHER INFORMATION HEALTH FLAMMABILITY REACTIVITY PERSONAL PROTECTION

1 1 0 B

REVISED: 9-22-2008 / JOE STAFFORD Section 2 was revised regarding hazardous chemicals The above data is for information purposes only and is accurate to the best of Colonial Chemical, Inc.’s knowledge. No guarantees or liabilities are expressed or implied. Colonial Chemical Inc. assigned HMIS ratings to this product based on the hazards of its ingredient(s). Because the customer is most aware of the application of the product, they must ensure that the proper personal protective equipment (PPE) is provided consistent with the information contained in the product MSDS. * * This information is intended solely for the use of individuals trained in the particular hazard rating system.