March Mini 8-07

Chevy Small & BIg Block Serpentine Conversion Kits Replace your low performance V-belts, pulleys and brackets while retaining your standard rotation water pump. Kits are available with performance pulleys which increase horsepower by approximately 12 h.p. depending on accessories driven or high water flow ratios for increased cooling. Spectacular looking new machine finish with perfect fit and extra high strength. “No Polishing” maintenance-free clear powdercoating. Complete with stainless steel tensioning rod, chrome moly rod ends and necessary mounting hardware.

Application:

These kits fit most mid and full size cars from the early 1950’s and newer. Kit also fits 1969 and later Camaros and Nova’s. Other cars check water pump nose to radiator clearance. Long water pumps extend out 8" from the engine block, plus clearance for mechanical or electric fans.

Kit Includes: Alternator bracket Crank pulley Water pump pulley with nose cover ● Alternator pulley with alternator fan and nose cover ● Power steering kit includes power steering brackets and pulley ● Air conditioning kit includes A/C bracket, idler and A/C nose cover ● Grade 8 mounting hardware ● ● ●

Shown with our Billet Alternator & Power Steering Pump

“Standard Mount” with Drivers Side A/C

Performance Kits (Increases Horsepower) Big Block Kits for 9.8 deck height blocks Kit #

22010 Small 22020 Small 22030 Small 22035 Small 23010 Big 23020 Big 23025* Big 23030 Big Type of Accessories

Alternator

A/C

Saginaw Keyway P/S Pump

Water Pump

yes yes yes yes yes yes yes yes

yes yes yes yes yes yes yes yes

Sanden GM 6-12 o’clock 505 or 508 mounting 7" diamserpentine eter alternator A/C

Saginaw Press Fit P/S Pump

Saginaw Metric P/S Pump

Remote Reservoir P/S

Alternator Belt Size

41" 41" 41" 41" 42.5" 42.5" 42.5" 42.5"

yes yes yes yes yes yes

Long water pump standard rotation

1966-74 keyway Saginaw pump with canister

1975-78 press fit Saginaw pump with canister

1978-87 press fit Saginaw metric pump

1987 Sunbird P/S pump

Dayco 6 rib

P/S Belt Size

33.5" 33.5" 33.5" 38" 39" 38" Dayco 5 rib

High Water Flow Kits (Increases Cooling) Big Block Kits for 9.8 deck height blocks Kit # Small

Alternator

22040 Small 22050 Small 22060 Small 22065 Small 22070 Small 22080 Small 22085 Small 23040 Big 23050 Big 23055* Big 23060 Big 23070 Big 23080 Big 23090* Big

yes yes yes yes yes yes yes yes yes yes yes yes yes yes

Type of Accessories

GM 6-12 o’clock mounting 6" or 7" diameter alternator

A/C

Water Pump

yes yes yes yes yes yes yes yes yes yes yes yes yes yes

yes yes yes

yes yes yes Sanden 505 or 508 serpentine A/C

Long water pump standard rotation

* All Chevelles, Monte Carlos and 70 and newer Camaros

Saginaw Keyway P/S Pump

Saginaw Press Fit P/S Pump

Saginaw Metric P/S Pump

Remote Reservoir P/S

yes yes yes yes yes yes yes yes yes yes yes yes 1966-74 keyway Saginaw pump with canister

1975-78 press fit Saginaw pump with canister

1978-87 press fit 1987 Sunbird Saginaw metric P/S pump pump

Alternator P/S Belt P/S & A/C Belt Size Size Belt Size

42.5" 42.5" 42.5" 42.5" 42.5" 42.5" 42.5" 44.5" 44.5" 44.5" 44.5" 47" 47" 47" Dayco 6 rib

35" 35" 35" 56" 56" 56" 39" 40" 39" 59.5" 59.5" 61" Dayco 6 rib

Dayco 6 rib

1

Chevy LS-1 Serpentine Kits “Outward Mount” Alternator and A/C

Precision CNC machined from solid billet 6061-T6 aluminum to fit perfectly and handle high torque and vibration. This bracket kit comes complete with stainless steel tensioning rods and chrome moly rod ends for high performance operation. All necessary hardware included. All pulleys and brackets are powdercoated to eliminate polishing in those hard to reach places. We go as far as hard coating the high wear areas on our pulleys!

Application:

These kits fit most 1955 and newer Chevys. Requires F-body crank pulley/dampner

Kit Includes: Water pump pulley cover Alternator pulley with alternator fan and cover ● Outward mount alternator and A/C brackets ● Tension relocation arm ● Stainless tensioning rod and rod ends ● Idler brackets, double bearing idlers with covers ● A/C clutch cover ● Power steering kit includes bracket and pulley ● Remote reservoir power steering setup includes bracket pulley and idler ● Grade 8 mounting hardware ● ●

Crank Cover Not Included

See Our Web Site for a NEW LS-1 Serpentine Kit Designed for Street Rods

Optional Matching Billet Accessories: ●

#450 billet aluminum remote power steering reservoir canister

Chevy LS-1 Engine Kit #Drives 20101 20102 20103 20104

Alternator YES YES YES YES

Type of Accessories

A/C

Remote Power Steering

YES

Belt Size 78.5" 95.5" 100" 115"

1987 Sunbird remote reservoir pump

Dayco 6 rib

YES

GM 6 & 12 o'clock 7" Alternator

YES YES Sanden 505 or 508 serpentine A/C

Chevy Small Block Serpentine Conversion Kits Deluxe & Custom Standard Mount Kits Standard Rotation Lower Cost Deluxe: Replace your low performance V-belts, pulleys and brackets while retaining your standard rotation water pump. Eliminates belt throwing. Kits are available with performance pulleys for increase horsepower or high water flow ratios for increased cooling.

Low Cost Custom: Same reliable CNC machined aluminum as our Deluxe series

but with a protective silver powdercoat. A great kit at an excellent price. Complete with pulley and brackets and mounting hardwear. .

Application: These kits fit most mid and full size cars from the early 1950’s and newer. Kit also fits 1969 and later Camaros and Nova’s. Other cars check water pump nose to radiator clearance. Long water pumps extend out 8” from the engine block, plus clearance for mechanical or electric fans.

Kit Includes: Crank pulley Water pump pulley ● Alternator pulley ● Alternator pulley nose cover (Deluxe Kit Only) ● ●

Power steering kit includes power steering brackets and pulley Air conditioning kit includes A/C bracket, idler ● Superior grade 8 mounting hardware ●

●

High Water Flow Kits (Increases Cooling) Kit #Drives

Alternator

A/C

Water Pump

22041

YES

YES

22051

YES

YES

22061

YES

YES

22066

YES

YES

22071

YES

YES

YES

22081

YES

YES

YES

22086

YES

YES

YES

GM 6-12 o’clock mounting 6" or 7” diameter alternator

Sanden 505 or 508 serpentine A/C

Long water pump standard rotation

Type of Accessories

Saginaw Keyway P/S Pump

Saginaw Press Fit P/S Pump

Saginaw Metric P/S Pump

Alternator Belt Size

P/S Belt Size

P/S & A/C Belt Size

42.5” YES YES YES YES

1975-78 press fit Saginaw pump with canister

35”

42.5”

35”

42.5”

35”

42.5”

56”

42.5”

56”

YES

42.5”

56”

1978-87 press fit Saginaw metric pump

Dayco 6 rib

YES 1966-74 keyway Saginaw pump with canister

42.5”

Dayco 6 rib

Dayco 6 rib

2

Chevy Small & Big Block Serpentine Conversion Ultra Style Long Water Pump Standard Rotation

Compact Mid Mount Passenger Side A/C This ingeniously designed mid mount serpentine kit incorporates a combination bracket that provides a compact and strong mounting for the alternator and air conditioner. The addition of an idler provides excellent belt wrap around the alternator and A/C compressor pulleys for “No Slip” operation. Simple to bolt on! Eliminates belt throwing. Kit comes complete with stainless steel tensioning rod, chrome moly rod ends and necessary mounting hardware.

Application: These kits fit most mid and full size cars from the early 1950’s and newer. Kit also fits 1969 and later Camaros and Nova’s. Other cars check water pump nose to radiator clearance. Long water pumps extend out 8” from the engine block, plus clearance for mechanical or electric fans.

Ultra Kits Includes: Alternator/Air Conditioner brackets and idler A/C nose cover ● Crank pulley ● Water pump pulley with nose cover ● Alternator pulley with alternator fan and nose cover ● Power steering kit includes power steering brackets and pulley ● Grade 8 mounting hardware ●

●

Big Block

See Page 9 High Water Flow Kits (Increases Cooling) Big Block Kits for 9.8 deck height blocks Kit Number

Alternator

A/C

Water Pump

22045 Small Block

yes

yes

yes

22072 Small Block

yes

yes

yes

22082 Small Block

yes

yes

yes

22087 Small Block

yes

yes

yes

23045 Big Block

yes

yes

yes

23072 Big Block

yes

yes

yes

23082 Big Block

yes

yes

yes

23092 Big Block

yes

yes

yes

Type of Accessories

GM 6-12 o’clock mounting 6" or 7” diameter alt.

Sanden 7176 or March P411 compressor

Long water pump standard rotation

Saginaw Keyway P/S Pump

Saginaw Press Fit P/S Pump

Saginaw Metric P/S Pump

Remote Reservoir Pump

Belt size

62" Alt/A/C yes

62" Alt/A/C - 35" P/S yes

62" Alt/A/C - 35" P/S yes

62" Alt/A/C - 35" P/S 62" Alt/A/C

yes

62" Alt/A/C - 38" P/S yes

1966-74 keyway Saginaw pump with canister

1975-78 press fit Saginaw pump with canister

62" Alt/A/C - 38" P/S

1978-87 press fit Saginaw metric pump

yes

62" Alt/A/C - 38" P/S

87 Sunbird P/S Pump

Dayco 6 rib

3

Chevy Small & Big Block Serpentine Conversion Standard Rotation “Mid Mount” Alt & P/S Kit Simple yet exceptionally styled this new “Mid Mount” Alternator and Power Steering serpentine kit from March Performance offers an exciting new look, these brackets are even machined on the engine facing side for a great appearance from all sides. Looks wonderful with our new billet power steering pump case (as pictured). A new higher mounted power steering pump bracket helps clear the steering gear box in some vehicles. Retains your standard rotation water pump. Available with performance pulleys which increase horsepower or high water flow ratios pulleys for increased cooling. CNC machined from solid billet 6061-T6 aluminum for a spectacular looking machine finish with perfect fit and extra high strength. All our billet pulleys and brackets have a “No Polishing” maintenance-free clear powdercoating. Kit comes complete with stainless steel tensioning rod, chrome moly rod ends and necessary mounting hardware.

Big Block

Application: These kits fit most mid and full size cars from the early 1950’s and newer. Kit also fits 1969 and later Camaros and Nova’s. Other cars check water pump nose to radiator clearance. Long water pump kit extends out 8” from the engine block with nose cover in place, plus clearance for mechanical or electric fans. On big blocks, 9.8" deck height block

Big Block P/S extra high mounting to clear gear box (Camaros, Chevelles and Novas)

Ultra Kits Includes: Crank pulley Water pump pulley with nose cover Alternator pulley with alternator fan and nose cover ● Alternator Bracket with relocation arm and adjustment rod ● Power steering kit includes power steering brackets and pulley with (Nose cover on Big Block) ●

Shown with March's own optional billet power steering pump, Part# 9600 Billet reservoir with Keyway pump. Part# 452 Billet Case only (use internals from your old pump).

● ●

SHOWN WITH OPTIONAL FUTURA STYLE AIR CLEANER

Small Block

Optional Accessories: ●

Air conditioning kit (small block only), includes A/C bracket, idler and A/C nose cover

Small Block Drivers Side A/C Kit Available

Small Block Kits Performance Kits (Increases Horsepower) Kit # Drives

Alt.

Water Pump

22013 22023 22033 22038

Yes Yes Yes Yes

Yes Yes Yes Yes

Saginaw Keyway P/S Pump

Saginaw Press Fit P/S Pump

Saginaw Metric P/S Pump

Alt. Belt Size

P/S Belt Size

Yes

42.5" 42.5" 42.5" 42.5"

33.5” 5 rib 33.5” 5 rib 33.5” 5 rib

Yes

42.5" 42.5" 42.5" 42.5"

35" 6 rib 35" 6 rib 35" 6 rib

Yes Yes

High Water Flow Kits (Increases Cooling) 22043 22053 22063 22068 Type of Accessories

Yes Yes Yes Yes

Yes Yes Yes Yes

GM 6-12 o’clock mounting 7” diameter alternator

Long water pump standard rotation

Yes Yes 1966-74 keyway Saginaw pump with canister

1978-87 press fit Saginaw pump with canister

1978-87 press fit Saginaw metric pump

Dayco 6 rib

Dayco

Big Block Kits Performance Kits (Increases Horsepower) Kit # Drives

Alt.

Water Pump

23013 23023 23033

Yes Yes Yes

Yes Yes Yes

Saginaw Keyway P/S Pump

Saginaw Press Fit P/S Pump

Alt. Belt Size

P/S Belt Size

Yes

41.5" 41.5" 41.5"

39.5" 39.5"

Yes

42.5" 42.5" 42.5"

39.5" 39.5"

Dayco 6 rib

Dayco 5 rib

Yes

High Water Flow Kits (Increases Cooling) 23043 23053 23063 Type of Accessories

Yes Yes Yes GM 6-12 o’clock mounting 7” diameter alternator

Yes Yes Yes

Yes

Long water pump standard rotation

1966-74 keyway Saginaw pump with canister

1978-87 press fit Saginaw pump with canister

4

Chevy Small & Big Block Serpentine Kits “Ultra Drive Front Mount” Compact Design Short Water Pump, Reverse Rotation This new system has been designed for mounting accessories below the valve covers and in between the width of the heads. Precision CNC machined from 6061-T6 aluminum for strength and perfect fit. Hardcoated on high wear areas. Clear coated to eliminate polishing in those hard to reach places. Carbon Fiber kits incorporate hints of high tech materials for a fresh new look.

Application: Kit is designed to fit Ram Jet, Tuneports, Single and multi carb engines

3 Ways to Choose Great Kit 1. Ultra: Styling from All Angles As pictured Includes: Polished Sanden A/C compressor 134A Polished Custom March Alternator ● Aluminum reverse rotation water pump ● GM Type 2 power steering pump ● OEM tensioner with cover ● A/C bracket & nose cover ● Alternator bracket ● P/S bracket and housing cover ● Crank pulley ● Water pump pulley with fairing and nose cover ● Alternator pulley with machined fan and nose cover ● Wing emblem ● Polished A/C Fittings ● Superior grade 8 mounting hardware ● ●

Kits do not come with power steering reservoir or lines. Plumbing available separately

Kit 2. Deluxe:

Ideal for cars with minimal engine to radiator clearance, see dimensional diagrams. Includes: All above mentioned parts, minus- A/C nose cover - Alternator pulley nose cover - Water pump pulley nose cover - Tensioner pulley nose cover - Power Steering pulley cover

Kit 3. Custom:

A low cost system that gives up nothing in performance. Uses nonpolished A/C compressor, Water pump and alternator with standard steel alt fan. Includes: All above Deluxe Kit parts, minus- All nose covers - Power steering housing cover - Tensioner housing cover

Balancer Face to Front of Block Small Block

Big Block

Crank pulley

3.200"

3.500"

Water pump pulley

3.625"

3.700"

Water pump w/cover

4.425"

4.400"

A/C unit

3.750"

4.000"

A/C w/nose cover

4.500"

4.750"

ALT pulley

3.250"

3.550"

ALT w/nose cover

4.000"

4.300"

Power Steering

3.450"

3.750"

Chevy Small & Big Block Kits Kit Type

Ultra Carbon Fiber New! Ultra Carbon Fiber New! Ultra New Pulley Vents Ultra New Pulley Vents Deluxe New Pulley Vents Deluxe New Pulley Vents Custom New Pulley Vents Custom New Pulley Vents

Small Block Kit # Drives

Big Block Kit # Drives

Alternator

A/C

20265 20266 20250 20260 20270 20280 20275 20285

20365 20366 20350 20360 20370 20380 20375 20385

yes yes yes yes yes yes yes yes

yes yes yes yes yes yes yes yes

Power Steering

yes yes yes yes

Belt Size

61"SB - 62.3"BB 62"SB - 66"BB 61"SB - 62.3"BB 62"SB - 66"BB 61"SB - 62.3"BB 62"SB - 66"BB 61"SB - 62.3"BB 62"SB - 66"BB

5

Chevy Small Block Serpentine Drive Outward Mount Alternator and Air Conditioning Optional Power Steering

Bolts to the front of any 1969 or later small block Chevy heads. All necessary hardware included. Matching serpentine pulleys are precision CNC machined from 6061-T6 aluminum. This is the same material we use for NASCAR pulleys! These pulleys will not fracture like common cast pulleys. High tensile strength means much longer wear. We go as far as hard coating the high wear areas on our pulleys! Our street rod ratio increase water flow and fan speed. This helps at critical low speed driving.

Application:

This kit is designed to fit 1955 or later Chevys and 1963-1982 Corvettes. It requires 1984-1991 Corvette reverse rotation short water pump. GM A Body, 1970 and newer F Body, and G Body Vehicles require remote reservoir power steering kits.

Kit Includes:

Alternator and A/C brackets Tensioning rods and adjustable rod ends ● Alternator relocation arm ● Idler bracket with dual idlers ● Heater hose extension fitting ● Crank pulley, Water pump pulley with nose cover and alternator pulley with fan and nose cover ● A/C clutch cover ● Grade 8 Mounting hardware ● Power steering kit includes power steering bracket and pulley ● ●

SHOWN WITH OPTIONAL FUTURA STYLE AIR CLEANER AND VALVE COVERS

Optional Matching Billet Aluminum Accessories: ● ● ●

#400 crank pulley nose cover (high water flow kits only) #450 billet remote power steering reservoir canister A/C compressors, alternators, power steering pumps and hose kits listed on accessories pages

84-91 Vette Small Block Rev. Rotation Water Pump

Check Bolt Pattern A A = 4 3/16" Kits for Engines with 1969 - Later Cast Iron Heads & Aftermarket Aluminum Heads Kit #Drives 20405 20406 20407 20408

Alternator

A/C

Water Pump

YES YES YES YES

YES YES YES YES

YES YES YES YES

Saginaw Keyway P/S Pump

Saginaw Press Fit P/S Pump

Remote Power Steering

Belt Size

YES

95.5" 107.5" 107.5" 102.5"

YES

94" 106.5" 106.5" 100”

YES YES

A = 3 9/32" Kits for Engines with L98 & ZZ4 Aluminum Heads 20415 20416 20417 20418 Type of Accessories

YES YES YES YES GM 6-12 o’clock mounting 6" or 7" diameter alternator

YES YES YES YES

YES YES YES YES

Sanden 505 or 508 serpentine A/C

1984-91 Corvette reverse rotation water pump

YES YES 1966-74 keyway Saginaw pump with canister

1975-78 press fit Saginaw pump with canister

1987 Sunbird small remote reservoir pump

Dayco 6 rib

Performance Kits (Increases Horsepower) Kit #Drives 20420 20440 20445 20460 20475

Alternator

Water Pump

YES YES YES YES YES

YES YES YES YES (electric) YES

Saginaw Keyway P/S Pump

Saginaw Press Fit P/S Pump

Remote Power Steering

YES YES YES

Belt Size 53.8" 54.8" 54.8" 54.8" 49"

High Water Flow Kits (Increases Cooling) 20430 20450 20455 20470 Type of Accessories

YES YES YES YES GM 6-12 o’clock mounting 6" or 7" diameter alternator

YES YES YES YES

YES YES

Short water pump standard rotation

Got a Big Block?

1966-74 keyway Saginaw pump with canister

1975-78 press fit Saginaw pump with canister

1987 Sunbird small remote reservoir pump

53.8" 54.8" 54.8" 56” Dayco 6 rib

Call or see our web site for a BB version of this popular kit. 6

Chevy Small & Big Block

Serpentine Kits for Alternator & Power Steering Electric Water Pump Bracket Kits for Chevy Small and Big Block are designed to solve the problem of how to mount accessories to engines with the popular electric water pumps. Comes complete with stainless steel tensioning rods chrome moly rod ends for high performance operation. Matching serpentine pulleys are precision CNC machined from 6061-T6 aluminum and powder coated. Big Block kits fit Meziere and CSI pumps. Small block kits require adapter kits to fit Meziere, CSI/CSR, Aerospace Components and Proform pumps.

Kits Include:

Crank Pulley Alternator bracket Alternator pulley with alternator fan and cover. ● Tensioning relocation arm. ● Stainless tensioning rod and rod ends. ● Power steering kit includes bracket and pulley with cover. ● All mounting hardware and bolts ● Water pump adapters to fit Meziere and CSI/CSR electric pumps (big block kit only, small block must order adapters, see below) ● ● ●

Chevy Small Block Bracket & Pulley Kits Adapter kits required (see next column) Part# 22005 Part# 22006 Part# 22007 Part# 22005-09 Part# 22006-09 Part# 22007-09

ULTRA Alternator Only ULTRA Alternator, Power Steering (Saginaw keyway) ULTRA Alternator, Power Steering (Saginaw press fit) CUSTOM Alternator Only, Lower cost Custom with silver finish CUSTOM Alternator, Power Steering (Saginaw keyway) Lower Cost Custom with silver finish CUSTOM Alternator, Power Steering (Saginaw press fit) Lower Cost Custom with silver finish

Big block kit shown, see our web site for small block photos. Also shown with March's own optional billet power steering pump, Part# 9600 Billet reservoir with Keyway pump. Part# 452 Billet Case only (use internals from your old pump).

Chevy Small Block Water Pump Adapter Kits Required to match your brand of electric water pump to March brackets Part #22091 Meziere Alternator Part #22096 Meziere power steering Part #22092 CSI/CSR Alternator Part #22097 CSI/CSR power steering Part #22093 Aerospace Components Alternator Part #22098 Aerospace Components power steering Part #22094 Proform Alternator Part #22099 Proform power steering

Chevy Big Block Bracket & Pulley Kits

Adapter kits for Meziere and CSI/CSR included Big Block Kits

for 9.8 deck height blocks Part # 23005 Part # 23006 Part # 23007

Alternator Only Alternator, Power Steering (Saginaw keyway) Alternator, Power Steering (Saginaw press fit)

Chevy LS-1 S.F.I. Fluid Dampened Performance Pulley

“Low Mount”

Short Water Pump Alternator Bracket

S.F.I. Approved

Part# 20215......Small Block Fits short water pump Chevys Part# 20315......Big Block Fits short water pump Chevys (Requires alternator with 6&12 o’clock mounting position) Center of crank to outside of alternator 12.5"

Fluid dampened design will not cause spark sensors to retard timing with resultant loss in power unlike some poorer designed pulleys. Dyno tested at 12H.P. gain. S.F.I. Approved. Part# 4521 Camaro/Firbird dampener crank pulley. Part# 4505 Camaro/Firbird dampener crank pulley and power and amp alt pulley

A/C Compressor Sanden 508 with Serpentine Pulley

Part #P410 Sanden 508 polished newer style HFC-134 refrigerant, with serpentine pulley (new).

#P410

#P475

Part #P411 Sanden 7176 polished Compact style HFC-134 refrigerant, with serpentine pulley (new). Part #P475 Serpentine pulley and clutch for Sanden 508 compressor (perfect for converting your compressor from V-belt to serpentine)

#P411

7

Chevy Small & Big Block Brackets Long Water Pump, Serpentine or V-belt

“Mid Mount”

Alternator Bracket Chevy Small and Big block Alternator bracket fits serpentine and V-belt applications. Comes complete tensioning rod with with chrome moly rod ends for perfect belt tension and all and mounting hardware. Powder coated to eliminate polishing. Part# 20124 Ultra Small Block Fits long water pump Chevys Part# 20127 Ultra Big Block Fits long water pump Chevys Big Blocks with 9.8 deck height blocks

Part# 20127 Big Block Ultra

“Mid Mount”

Power Steering Bracket Exceptionally styled Chevy Small and Big Block power steering bracket fits serpentine applications. Comes complete with all mounting hardware. Powder coated to eliminate polishing. Saginaw 1966-78 pumps Part# 20160 Ultra Small Block Fits long water pump Chevys Part# 20151 Ultra Big Block Fits long water pump Chevys Part# 20151 Big Block Ultra Shown with optional Billet P/S Pump Case, see page 9 Higher mounting of power steering pump to clear steering gear box

“High Performance Standard Mount”

Alternator Brackets

Our new Performance Series 6061-T6 Powdercoated billet aluminum brackets are precision CNC machined for perfect fit and alignment. To maintain perfect tension we supply you with high strength stainless steel tensioning rods and chrome moly rod ends. Part# 20120 Ultra Small Block long water pump engine. Clear powder coated Part# 20121 Deluxe Small Block Clear powdercoated. NEW LOW PRICE Part# 20123 NEW LOW COST CUSTOM Small Block Silver Powder Coated. Part# 20125 Ultra Big Block long water pump engine. with 9.8 deck height blocks Fits 3⁄8 and 7⁄16 tapped holes in passenger side cylinder head Part# 20125-09 NEW LOW COST CUSTOM Big Block with 9.8 deck height blocks Optional Part# 20122 Rear support bracket or mounting #20120 bracket kit to heads that do not have threaded mounting holes on face of heads.

(Requires alternator with 6&12 o’clock mounting position)

Part# 20121 Deluxe

Part# 20120 Ultra

“Front Mounted”

Power Steering Brackets Chevy Small and Big Block Long Water Pump Engines March Performance’s NEW front mount power steering bracket eliminates the need or the search for all the wrap-around and header mounting brackets required for belt tensioning. For early 1966 - 1978 Saginaw power steering pumps. Cannot be used with 2v power steering pulleys

* Part# 20160 Ultra Small Block Upper and Lower Bracket Kit 1966-1978 Saginaw pumps *Part# 20161 Deluxe Small Block LOW PRICE *Part# 20161-09 NEW LOW COST CUSTOM Small Block *Part# 20165 Ultra Small Block 1978 and newer with metric threads with O-rings and NO 6’oclock rear threaded hole, upper and lower bracket kit.

* Part# 20150

Ultra Big Block Long water pump engines, Kit includes upper and lower brackets. Fits 1966-1978 Saginaw power steering pumps.

* Part# 20150-09

NEW LOW COST CUSTOM Big Block NEW LOWEST PRICE Long water pump engines, Kit includes upper and lower brackets. Fits 1966-1978 Saginaw power steering pumps.

*NOTE: Must use 1 groove v-belt or serpentine pulley only

Part# 20160 Ultra

Part# 20161 Deluxe

8

Chevy Small Block Brackets Short Water Pump, Serpentine or V-belt

“Outward Mount"

Short Water Pump Alternator Brackets Our new Performance Series 6061-T6 Powdercoated billet aluminum brackets are precision CNC machined for perfect fit and alignment. To get belt tension perfect we supply you with high strength stainless steel tensioning rods and chrome moly rod ends. (Requires heads with accessory holes and alternator with 6&12 o’clock mounting position) Part# 20130....Small Block Short Water Pump Part# 20131....NEW DELUXE Drivers Side Mount Part# 20132....NEW DELUXE Passenger Side Mount

Lower Cost Part# 20130

“Outward Mount”

A/C Bracket

A/C bracket fits serpentine and V-belt applications. Comes with tensioning rod and mounting hardware. Powder coated.

Part# 20131 DELUXE

Part# 20171....NEW DELUXE Small Block Passenger Side Mount (Requires Sanden 505 or 508 compressor) NOTE: See kits if you want to run serpentine belt on short water pump engines

“High Performance”

Chevy Big Block Short Water Pump Alternator Bracket Our new Performance Series 6061-T6 Powdercoated billet aluminum brackets are precision CNC machined for perfect fit and alignment. To get belt tension perfect we supply you with high strength stainless steel tensioning rods and chrome moly rod ends and alternator adapter. Part# 20135....... Big Block Bracket fits Short Water Pump Engine NOTE: See Kits if you want to run serpentine belts (Requires heads with accessory holes and alternator with 6&12 o’clock mounting position)

March Billet Accessories March Billet Alternator for GM and Ford Stylish Billet aluminum alternator replaces your ugly OEM alternator with a March Billet alt. (Does not include pulley or fan) Part #9650 GM 140 amp 1 wire Billet alternator Part #9665 Ford 140 amp 1 wire Billet alternator

Billet Power Steering Pump Case Replace your ugly Saginaw power steering pump canister with a phenomenally styled aluminum billet reservoir. Perfect accompaniment to March's bracket kits. Part# 9600 Billet reservoir with Saginaw Keyway pump. Part# 452 Billet Case only (use internals from your old pump).

GM Ford Alternator Fans Works with any alternator pulley Precision CNC machined from solid billet 6061-T6 aluminum, covered with clear powdercoat.

Part #221 Part #222

Traditional Open Fan Pocketed Type Fan

Part# 221

Pulley not included, see web site or catalog for pulleys

Futura Billet Aluminum Air Cleaner

Part# 222

Exceptional styled add-on to our Futura style bracket kits. Air cleaner fits single 4 barrel carb applications. Air cleaner total hight is ..... 3 1⁄4 " With cover hold down ......... 3 3⁄4 " Part #9700

Billet aluminum air cleaner. Clear powder coat. Includes air filter and billet hold down.

Part #9725

Polished Billet aluminum air cleaner. Includes air filter and billet hold down.

Call for our Complete Line of Chevy Small Block V-belt & Serpentine Pulleys 9

Chevy V-belt Pulley Sets Precision CNC machined to run perfectly true. 6061-T6 aluminum for extra strength and wear. Finished with a “No Polishing” clear powdercoat.

Performance Series: Increases horsepower by reducing accessory drag. 12-15 h.p. at rear wheels typical. Eliminates belt throwing. Designed for daily street driving.

High Water Flow Series: Increases cooling by speeding up water flow and fan speed. This helps at critical low speed driving where most overheating occurs.

For individual pulley groove configuration and size see our consult our full size catalog.

Chevy Small Block V-belt Pulley Sets Performance Series, Long Water Pump Set#

Crank Pulley

Water Pump Pulley

Alt. Pulley with Nose Cover

Optional P/S Pulley Keyway

Optional P/S Pulley Press Fit

Optional Alt. Fan

6050 6070 6090 6095

1V 2V 3V 3V

1V 1V 2V 3V

1V 1V 1V 1V

1V #513 2V #521 2V #521

1V #531 2V #520 2V #520

221 221 221 221

6160 6170 6190

1V 2V 3V

1V 1V 2V

1V 1V 1V

1V #513 2V #521

1V #531 2V #520

221 221 221

6010 6015 6030 5090

1V 2V 2V 3V

1V 1V 2V 2V

1V 1V 1V 1V

1V #523 1V #523 1V #510

1V #515 1V #515 1V #511

221 221 221 221

6110 6120 6130 6140

1V 2V 2V 3V

1V 2V 1V 2V

1V 1V 1V 1V

1V #523 1V #523 1V #510

1V #515 1V #515 1V #511

221 221 221 221

High Water Flow Series, Long Water Pump Performance Series, Short Water Pump

High Water Flow Series, Short Water Pump

Chevy Big Block V-belt Pulley Sets Performance Series, Long Water Pump Crank pulley

Water pump pulley

Alt. pulley with nose cover

Optional Keyway P/S pulley

Optional press fit P/S pulley

Optional Alt. fan

7005 7015 7020 7040* 7050*

1V 2V 2V 3V 3V

1V 1V 2V 2V 1V

1V 1V 1V 1V 1V

1V #513 1V #513 2V #521 2V #521

1V #531 1V #531 2V #520 2V #520

221 221 221 221 221

7105 7115 7140* 7150*

1V 2V 3V 3V

1V 1V 2V 1V

1V 1V 1V 1V

1V #513 2V #521 2V #521

1V #531 2V #520 2V #520

221 221 221 221

7510 7530 7550

1V 2V 3V

1V 2V 2V

1V 1V 1V

See P/S page on our website See P/S page on our website

See P/S page on our website See P/S page on our website

221 221 221

7710 7730 7750

1V 2V 3V

1V 2V 2V

1V 1V 1V

See P/S page on our website See P/S page on our website

See P/S page on our website See P/S page on our website

221 221 221

Set #

High Water Flow Series, Long Water Pump

Performance Series, Short Water Pump High Water Flow Series, Short Water Pump

GM Power Steering Pulleys

A....Bore Size B....Face to center of first groove C....Face to center of second groove D....Diameter of stock pulley E.... Distance from crank p/s groove to back of p/s pulley shaft 5/8" Keyed F.....Same as E (second groove) Shaft

Measure this distance to find E & F on pulley chart. Crank Pulley power steering groove Use dimension E & F to find proper pulley if you have a keyway power steering pump mounted to the engine and no pulley

Chevy Small and Big Block Part # 510 511 512 513 515 516 520 521 523 522 530 531 540 610

Mfg. OEM Part # 38860457 346289AK 2477954 3770509CE 140231761 354325AC 3941107DE 14023173DB 14023172DA 3925537DC 14102096NL

Shaft Size Dim. A 5⁄8 3⁄4 5⁄8 5⁄8 3⁄4 5⁄8 3⁄4 5⁄8 5⁄8 3⁄4 5⁄8 3⁄4 5⁄8 3⁄4

Key Way Yes No Yes Yes No Yes No Yes Yes No Yes No Yes No

1st Groove Dim. B 0.913 1.15 1.36 1.05 1.95 0.42 1.55 1.07 1.69 1.35 .57 1.25 0.812 Serpentine

2nd Groove Dim C

2.175 1.69 1.96

O.D. Size Dim D 5 3⁄4 5 3⁄4 5 3⁄4 5 3⁄4 6 5 3⁄4 5 3⁄4 5 3⁄4 5 3⁄4 6 6 6

1st Groove Dim E -.163

2nd Groove Dim F

-.550 -.300 +.330 -.320 -.940

-.940

+.180 -.000

6 3⁄8

10

Ford 289-302 (5.0), 351 C.i. Windsor Serpentine Kits These bracket kits come complete with stainless steel tensioning rods and chrome moly rod ends for high performance operation. All necessary hardware included. Serpentine pulleys are precision CNC machined from 6061-T6 aluminum. This is the same material we use for NASCAR pulleys! These pulleys will not fracture like common cast pulleys. High tensile strength means much longer wear. We go as far as hard coating the high wear areas on our pulleys! All brackets and pulleys are powdercoated to eliminate polishing in those hard to reach places. Our street rod ratio increase water flow and fan speed. This helps at critical low speed driving.

Air Conditioning Kits

Kit Includes: ●

Alternator bracket and tensioner

●

Crank pulley, water pump pulley, alternator pulley with fan and alternator nose cover

●

Crank pulley, water pump, pulley and nose cover

●

Alternator pulley with fan and nose cover

●

Reverse rotation alternator only kit includes idler bracket and idler pulley

●

Power steering kit includes bracket and pulley

Standard Rotation Aluminum Water Pump 289-302 (5.0) C.I. Kit Type

Kit # Drives

Alternator

Water Pump

Belt Size

Performance High Water Flow

30100 30105

yes yes

yes yes

40" 42.5"

Performance High Water Flow

30300 30305

yes yes

yes yes

41.5" 44.5"

Type of Accessories

1979-93 Mustang alternator 6-12 o’clock mounting

1985-87 Crown Victoria aluminum standard rotation water pump, driver side inlet

Dayco 6 rib

351 C.I. Windsor

Reverse Rotation Water Pump 302 (5.0) C.I. Kit Type

Performance Performance High Water Flow High Water Flow NEW! High Water Flow NEW! High Water Flow

Kit # Drives

Alternator

Water Pump

30115 30130 30120 30125 30135 30140

yes yes yes yes yes yes

yes yes yes yes yes yes

30310 30320 30315 30325 30330 30335

yes yes yes yes yes yes

yes yes yes yes yes yes

Type of Accessories

1979-93 Mustang alternator 6-12 o’clock mounting

1979-93 reverse rotation water pump, driver side inlet

Power Steering

Idler

A/C

Belt Size

yes yes

61" 67.5" 60" 70.5" 69" 76"

yes yes

59" 69.5" 65" 72.5" 77" 70.5"

Sanden #508 A/C Compressor

Dayco 6 rib

yes yes yes yes yes

351 C.I. Windsor Performance Performance High Water Flow High Water Flow High Water Flow High Water Flow

yes yes yes yes yes 1978-95 Ford Mustang P/S pump

With kit

All of these kits require a 90˚ angle thermostat housing. These kits also require the use of a water pump and radiator with a drivers side lower radiator hose. Some kits may require crank pulley spacers: 289/302/351W using OE 3 bolt balancer use #1432 - 289/302/351W engines using Fluidamper (28 oz.) use #1431 - 289/302/351W using Ford SVO, Summit balancers use #1433 - 1982-95 Mustang 5.0 engines using stock or Fluidamper (50 oz.) do NOT require spacers

Bracket Kits Only: (see pictures above)

Part# 30025 Ford 302 Alternator Bracket with Tensioner. Part# 30025-09 Low Cost Custom #30025 Part# 30035 Ford 302 Power Steering Bracket. Part# 30035-09 Low Cost Custom #30035 Part# 30040 Ford 302 Idler Bracket with Idler.

Part# 30055 Ford 351 Alternator Bracket with Tensioner. Part# 30055-09 Low Cost Custom #30055 Part# 30035 Ford 351 Power Steering Bracket. Part# 30040 Ford 351 Idler Bracket with Idler. LOW COST CUSTOM, Same quality pulleys with a economy silver powder coat!

Ford 5.0, 289-302 & 351 Windsor Brackets 5.0 Alt. & Power Steering Brackets

Part# 30028 ULTRA Standard Mount Alt. Bracket Part# 30037 ULTRA Power Steering Bracket for Saginaw Style Pumps Allows use of GM Saginaw pump on Ford motors, also March Performance own stylish Billet pump Part# 30038 ULTRA Power Steering Bracket for Ford Style Pumps

289-302 C.I. 1965-1969 Alt. Brackets

Part# 30351 Alt. Bracket: Requires passenger side lower radiator hose water pump.

289-302 Power Steering Brackets 71-76 Mustang

Part# 30352 P/S Bracket: Requires early Ford power steering pump. Matching P.S. pulley order part #504 passenger side radiator hose

302 C.I. 1969½ and Later

Part# 30355 Alternator Bracket. Requires drivers side lower radiator hose water pump. Part# 30356 P/S Bracket with matching pulley. Requires drivers side lower radiator hose water pump. requires 71-76 mustang power steering pump.

#30028 Alt Bracket

#30028 P/S Bracket, Shown with out billet pump

351 C.I. Windsor Alt. Brackets

Part# 30391 Alt. Bracket passenger side radiator hose water pump. Part# 30395 Alt. Bracket drivers side radiator hose water pump.

11

Ford 289-302 , 5.0 & 351w Serpentine Kits 5.0 & 351w Mid Mount A/C Serpentine Kits Fits both EFI or Carburetor Applications

This great looking new compact serpentine drive kit mounts the A/C unit low and under the alternator using a unique one piece bracket. Designed to fit both carb and fuel injection motors with reverse rotation water pumps. Two power steering brackets are available, one for mounting your standard Ford Mustang pump unit or you can get a bracket for mounting a Saginaw style pump Looks fantastic with March Performance own billet aluminum Saginaw style power steering pump and billet alternator.

Application:

Requires reverse rotation water pump on kits with P/S and A/C with 3.25” from balancer face to water pump mounting flange face.

Kit Includes:

• Combination Alternator/A/C bracket with idler,

Non-A/C Kits

tensioners and hardware Non A/C kits have alternator only bracket without idler

• Crank pulley, water pump pulley with nose cover • Alternator pulley with fan and nose cover • Power steering kit includes bracket kit for

5.0 Shown with our optional billet alternator #9665 and billet Saginaw type power steering pump #9600 see page 9

Ford or Saginaw pump unit and pulley

• Tensioning rod and rod ends • Grade 8 mounting hardware

Optional Billet Accessories: • #9665 March billet alternator • #9600 Saginaw style billet power

Standard Ford power steering pump

steering pump, for kits #30127 and #30168

Forward Dimension 3.75” from balancer flange to water pump nose cover

Ford 302, 5.0 Kit #Drives 30106 30126 30127 30167 30168

Alternator YES YES YES YES YES

A/C

Ford Power Steering

YES YES

Water Pump YES YES YES YES YES

YES YES YES

YES YES YES

YES YES YES

YES

Ford 6-12 o’clock mounting 6" or 7” diameter alternator

Sanden 7176 serpentine A/C Compressor or March P-411

Saginaw Power Steering

YES YES YES YES

Ford 351 Windsor 30387 30388 30389 Type of Accessories

YES

87-93 Mustang Reverse rotation water pump, or *stan- 1978-95 Mustang P/S pump dard rotation on kit 30106

1966-74 Saginaw keyway pump with canister or March Billet Saginaw Pump

5.0 & 351w Serpentine Kits 289-302 351 A/C Kits Standard Rotation Water Pump Kit Includes:

Now Available

• Alternator pulley with fan and

• Alternator bracket, tensioners and hardware nose cover • Power steering kit includes • Crank pulley, water pump pulley with bracket and pulley nose cover

1965-1969 289-302, 351 C.I. 3 bolt dampener, passenger side lower radiator hose water pump Engine Size 289-302 c.i. 289-302 c.i. 289-302 c.i. 289-302 c.i. 351 c.i. 351 c.i. 351 c.i. 351 c.i.

Kit #Drives 30160 30161 30165 30166 30360 30361 30365 30366

Alternator YES YES YES YES YES YES YES YES

A/C YES YES YES YES

Water Pump YES YES YES YES YES YES YES YES

Power Steering

YES YES YES YES

Belt Size 38" alt only 38"alt 50"a/c 38"alt 38"p.s. 38"alt 52"a/c&p.s. 40" 40"alt 52"a/c 40"alt 40"p.s. 40"alt 53.8"a/c&p.s.

19691⁄2 and later 302, 351C.I. into early 1965-69 cars 4 bolt dampener, earlier passenger side lower radiator hose water pump 289-302 c.i. 289-302 c.i. 289-302 c.i. 289-302 c.i. 351 c.i. 351 c.i. 351 c.i. 351 c.i.

30170 30171 30175 30176 30370 30371 30375 30376

YES YES YES YES YES YES YES YES

YES YES YES YES

YES YES YES YES YES YES YES YES

YES YES YES YES

38" 38"alt 50"a/c 38"alt 38"p.s. 38"alt 52"a/c&p.s 40" 40"alt 52"a/c 40"alt 40"p.s. 40"alt 53.8"a/c&p.s.

1969 ⁄ and later 302, 351C.I. 4 bolt dampener, drivers side lower radiator hose water pump 1 2

289-302 c.i. 289-302 c.i. 289-302 c.i. 289-302 c.i. 351 c.i. 351 c.i. 351 c.i.

30180 30181 30185 30186 30380 30381 30385

YES YES YES YES YES YES YES

351 c.i.

30386

YES

YES

YES

YES

Type of Accessories

Ford 6-12 o’clock mounting 6" or 7” diameter alternator

Sanden 505 or 508 serpentine A/C

standard rotation water pump

1971-76 Mustang P/S pump

YES YES YES

YES YES YES YES YES YES YES

YES YES YES

39" 39"alt 50"a/c 39"alt 38"p.s. 39"alt 52"a/c&p.s 41.5" 41.5"alt 52"a/c&p.s 41.5"alt 40"p.s. 41.5"alt 53.8"a/ c&p.s. Dayco 6 rib

12

Alt. & P/S with Mid Mount A/C This great looking new compact serpentine drive kit mounts the A/C unit low and under the alternator using a unique one piece bracket. Power steering brackets are available for mounting a Saginaw style pump Looks fantastic with March Performance own billet aluminum Saginaw style power steering pump and billet alternator. Comes complete with stainless steel tensioning rods and chrome moly rod ends for high performance operation.

Kit Includes:

• Combination Alt/A/C bracket with idler, tensioners and hardware Non A/C kits have alternator only bracket without idler

• Crank pulley, water pump pulley with nose cover • Alternator pulley with fan and nose cover • Power steering kit includes bracket kit for

Non A/C Kit

Saginaw pump unit and pulley • Tensioning rod and rod ends • Grade 8 mounting hardware

Shown with our optional billet alternator #9665 and billet Saginaw type power steering pump #9600

Optional Billet Accessories:

• #9665 March billet alternator • #9600 Saginaw style billet power steering pump. • #360 Power Steering Pump Pulley Nose Cover

Ford “FE” Kit #Drives

Alternator

19020

YES

19025

YES

19030

YES

Water Pump

Saginaw Power Steering

Belt Size

YES* YES YES

YES

YES

YES

YES

Ford 6-12 o’clock mounting 6" or 7” diameter alternator or March Billet alt.

Sanden 7176 serpentine A/C Compressor or March P-411

19035 Type of Accessories

A/C

Ford FE

YES YES 1966-74 Saginaw keyway pump with canister or March Billet Saginaw Pump

Dayco 6 rib

Ford 429-460 C.I. Serpentine Drive Kits This bracket kit comes complete with stainless steel tensioning rods and chrome moly rod ends for high performance operation. All necessary hardware included. Matching serpentine pulleys are precision CNC machined from 6061-T6 aluminum. These pulleys will not fracture like common cast pulleys. Our street rod ratio increase water flow and fan speed. This helps at critical low speed driving.

Kit Includes:

• Alternator bracket, tensioners and hardware • Crank pulley, water pump pulley with nose cover • Alternator pulley with fan and nose cover • Power steering kit includes bracket and pulley • A/C kit includes bracket, tensioner, idler pulley

Restyled for

2007

and clutch cover

• Grade 8 mounting hardware Requires 1970 and up water pump and timing cover and 4 bolt dampener. Power Steering Kits require Electric fuel pump

Ford 429-460 C.I. Serpentine Drive Kits Kit #Drives

30240 30245 30250 30255 30260 30265 Type of Accessories

Alternator

A/C

Water Pump

YES YES YES

YES YES YES YES YES YES

Sanden 505 or 508 serpentine A/C

1970 and newer Standard rotation water pump

YES YES YES YES YES YES Early Ford 6-12 o’clock mounting

351 C.I. Cleveland Brackets Billet aluminum, Clear powder coated complete with stainless steel adjusting rod.

Saginaw Keyway P/S Pump

Saginaw Press Fit P/S Pump

P/S A/C Belt Size

YES

46.5” 46.5” 46.5” 46.5” 46.5” 46.5”

40" 40" 53.8" 61.5" 61.5"

1975-78 press fit Saginaw pump with canister

Dayco 6 rib

Dayco 6 rib

YES YES YES 1966-74 keyway Saginaw pump with canister

Alternator Belt Size

Ford Billet Alternator Stylish Billet aluminum alternator replaces your ugly OEM alternator.

Part # 30400 Alternator V-Belt

(Does not include pulley or fan)

Part # 30405 Power Steering V-Belt. Requires Saginaw P/S pump. Keyway pumps use pully 510, pressfit use 511

Part #9665 Ford 140 amp 1 wire Billet alternator.

Shown with optional billet P/S pump,

Part# 9600 Billet reservoir with Keyway pump. Part# 452 Billet Case only (use internals from your old pump).

Inquire About Our New 351 Cleveland Kit, with A/C 13

5.0 Ford 1979 And Later Performance Serpentine Pulleys 12.5 h.p.. at 5000 rpm’s. 13.6 ft. lbs. of torque at 3900 rpm’s Super Ford Magazine May 1996 Performance Series: Increases horsepower by reducing accessory drag. 12.5 h.p. at rear wheels typical. Eliminates belt throwing. Designed for normal street driving.

Power & Amp Series:

Increases horsepower by reducing accessory drag. 11 h.p. at rear wheel. Design for vehicle with automatic transmission or high amperage need. EXCELLENT for heavy stop and go driving Steel Sets are precision machined to run perfectly true. Sets are machined from 6061-T6 billet aluminum for extra strength and wear.

2110 3 Piece Aluminum Set Clear Powdercoat

1979-1993 5.0 Mustangs/Trucks Performance Series Set #

1000 2010 2009 LOWER PRICE

Material

Crank Pulley

Water Pump Pulley

Alternator Pulley

3 pc. steel 3 pc. aluminum 3 pc. aluminum

43/8" 43/8" 43/8"

Non rib 51/2" Non rib 51/2" Non rib 51/2"

23/8"

Alternator Pulley Cover

23/8" 23/8" (No Cap)

Power and Amp Series (Recommended for Automatic Transmission Vehicles) 3 pc. steel 3 pc. aluminum

43/8"

3 pc. aluminum black 3 pc. aluminum polished

3" 3"

1 pc. aluminum black 1 pc. aluminum polished

3" 3"

1015 2015

43/8"

Non rib 51/2" Non rib 51/2"

111/16"

51/2"

23/8"

111/16"

Race Series 1030 1035

23/8"

51/2"

Race Cranks Only 1031 1032

6 rib 50% under drive 6 rib 50% under drive

1994-1995 5.0 Mustang Pulleys Performance Pulley Sets Set #

Material

Crank Pulley

Water Pump Pulley

Alternator Pulley

1100

Black Powdercoat aluminum

6 rib

non ribbed

6 rib

2110

Clear Powdercoat Aluminum

6 rib

non ribbed

Alternator Pulley w/Cover

6 rib

4.6 Mustang, GT and Cobra, 3.8 V6 Pulley Kits Performance Series Set #

LWP= Long Water Pump

SWP=Short Water Pump

Car & Year

Material

Crank Pulley

Water Pump Pulley

Alternator Pulley

yes yes yes yes yes

yes yes yes yes yes yes

1150 96-98 GT & 96-99 Cobra 3 pc. aluminum Black Powdercoat yes 1155 99-04 GT LWP 3 pc. aluminum Black Powdercoat yes 1170 01-04 GT & 01 Cobra SWP 3 pc. aluminum Black Powdercoat yes 1175 96-04 GT & 96-99 Cobra LWP 3 pc. aluminum Black Powdercoat SFI Dampner 1180 01-04 GT & 01 Cobra SWP 3 pc. aluminum Black Powdercoat SFI Dampner 2170 94-98 3.8 V6 2 pc. aluminum Black Powdercoat yes Optional: #116 - 4 inch Race Alternator Pulley #640 - 61/2" inch Race Power Steering Pulley

Check for Long or Short Water Pump

3 Piece Performance Pulley Kit

SWP Short Water Pump Pulley

LWP Long Water Pump Pulley

3 Piece Pulley Kit with SFI Dampener Pulley

Custom Style Ford Serpentine Pulley Sets

Our lower cost Custom series aluminum performance Sets are machined from the same high strength 6061-T6 billet aluminum as our Deluxe sets but have a machined aluminum finish with no powder coating. Unlike some of our competitors bargain pulleys we still hard coat the water pump pulley high wear area for reliability and the crank pulley seal area to prevent oil seal leakage.

Part# 2210 Part# 2215 Part# 2220 Part# 2250 Part# 2255 Part# 2270

79-93 5.0 Performance Series 79-93 5.0 Power and Amps Series 94-95 5.0 Performance Series 96-98 GT & 96-99 Cobra Performance Series 99-04 GT Performance Series LWP 01-04 GT & 01 Cobra Performance Series SWP

4.6 S.F.I. Fluid Dampened Performance Pulley New one piece design, does not require old dampener, Dyno tested at 12H.P. gain. Available as S.F.I. Approved or non-S.F.I. Approved. Part# 1158 96-2005 4.6 Mustang GT & 96-01Cobra. S.F.I. Approved. Note: Will not work on Mach 1

14

5.0-351W. A/C and Power Steering Eliminator Bracket Can eliminate up to 45 lbs. of front end weight thereby improving front to rear weight transfer for better traction. Mounts between water pump and power steering pump. All mounting hardware included. For 86-93 Mustang accessory drives Part# 1460 5.0 Part# 30080 351W. Requires 1986 - 1993 Mustang Tensioner.

Adjustable Alternator Bracket Kit

Complete with bracket, stainless steel adjusting rod, chrome moly rod end and mounting hardware for serpentine set ups. For 86-93 Mustang water pumps. #1435 Tensioner Cover kit Shown Part# 1465 5.0 Part# 30050 351W.

Serpentine Alt. Drive Kit For Electric WPs Backplate style CSI, Meziere, and Aerospace

Kit includes: Performance crank pulley (aluminum) Alternator bracket and tensioner rod Idler pulley Alternator pulley (aluminum). Will not work with 94-95 Mustang, 89-93 T-Bird and 96 and newer Explorer timing covers Shown with Opt. Part# 30065 5.0 (302c.i.) Part# 30060 351 Windsor Alternator fan #221

Ford V-belt Pulley Sets

Call for FE and 460’s

Performance Series:

Increases horsepower by reducing accessory drag. 12.5-15 h.p. at rear wheels typical. Eliminates belt throwing. Designed for normal street driving.

High Water Flow Series: Increases cooling by speeding up water flow and fan speed. This helps at critical low speed driving where most overheating occurs. For individual pulley groove configuration and size consult our full size catalog.

Ford 1965-1969 289-302-351 c.i.

Factory 3 bolt dampener, Passenger side lower radiator hose Note: Dampener face to water pump flange face 3-7/8"

Performance Series Set #

Crank Pulley

Water Pump Pulley

Alt. Pulley with nose cover

Optional P/S pulley 302 C.I.

Optional P/S pulley 351 C.I.

Optional alt. fan

1550 1560 1595

1V 2V 3V

1V 2V 2V

1V 1V 1V

1V #504 1V #504

1V #502 1V #502

221 221 221

1V 2V 2V

1V 1V 1V

1V #504 1V #504

1V #502 1V #502

221 221 221

High Water Flow Series 1555 1565 1585

1V 2V 3V

1969 1/2 & Later 302-351 c.i. Windsor & Cleveland

Factory 4 bolt dampener only Drivers side lower radiator hose Fluidamper use 1431 Spacer SVO / Summit Dampener use #1433 spacer Note: Dampener face to water pump flange face 3-1/4"

Performance Series Set #

1610 1625 1630 1650 1690

Crank Pulley

Water Pump Pulley

Alt. Pulley with nose cover

Optional P/S pulley 302 C.I.

Optional P/S pulley 351 C.I.

Optional Alt. fan

1V 2V 2V *3V 2.5" O.A.L. *3V 3" O.A.L.

1V 1V 2V 1V 1V

1V 1V 1V 1V 1V

1V #504 1V #504 1V #504 1V #504

1V #502 1V #502 1V #502 1V #502

221 221 221 221 221

1V 1V 2V 1V 1V

1V 1V 1V 1V 1V

1V #504 1V #504 1V #504 1V #504

1V #502 1V #502 1V #502 1V #502

221 221 221 221 221

High Water Flow Series 1647 1V 1657 2V 1667 2V 1655 *3V 2.5" O.A.L. 1685 *3V 3" O.A.L. *O.A.L. = Over All Length

Ford 302-351 Windsor

Factory 4 Bolt Dampener and Early Passenger Side Lower Radiator Hose Note: Dampener face to water pump flange face 3"

Performance Series Set #

Crank Pulley

Water Pump Pulley

Alt. Pulley with nose cover

Optional P/S pulley 302 C.I.

Optional P/S pulley 351 C.I.

Optional Alt. fan

1615 1635 1695

1V 2V 3V

1V 2V 2V

1V 1V 1V

1V #504 1V #504

1V #502 1V #502

221 221 221

1V 2V 2V

1V 1V 1V

1V #504 1V #504

1V #502 1V #502

221 221 221

High Water Flow Series 1617 1637 1697

1V 2V 3V

Ford Power Steering Pulleys

For individual pulley groove configuration and size see our web site at www.marchperf.com

Ford Power Steering Pulleys Part #

Notes P/S Style

500

Ford Pear Shape (Saginaw)

502

Ford Canister Fits Ford Big Block 351429-460 Ford Canister Fits Ford Small Block 289-302 Ford 5.0L Mustang

504

630

Shaft Size Dia. A

Key Way

1st Groove Dim. B.

3⁄4 11⁄16

No

1.33

2nd Groove Dim C.

O.D. Size Dim D. 6

No

1.336

5 1⁄2

11⁄16

No

0.87

5

11⁄16

No

Serpentine

5 1⁄2

1979-1993 Serpentine

15

Mustang Ram Air Kits 15 hp. increase by ramming denser cold air into your engine! This is the Best ram Air kit on the market. We use only the finest materials to manufacture these kits.

Part #1410

5.0 1986-1993

Part# 1410.... Kit includes: K+N Air filter

4.6 1996-2004, 5.0 1994-1995 3.8 1994-1998

Part #1420, and #1425

Part# 1420 for 4.6 Mustang GT Part# 1425 for 5.0 1994-1995 Mustang and 3.8 1994-1998 Kit includes: Massive Air Scoop, 5" Premium Air Duct, Mounting Coupler to Original Filter Box and Stainless Steel Hose Clamps (air filter not included) Requires trimming of lower valance

Mustang/Cobra 5.0, 4.6 & 3.8

We have combined our MARCH Performance Pulleys and Ram Air Kits into one great package

1986-93 5.0 Part# 1

Pulley’s #1000 and Ram Air System #1410 NEW Lower Price!

POWER PACK KIT #1

1996 - 1999 4.6 Cobra Part# 3

Pulley Kit #1150, Ram Air System #1440 (air filter not included)

1996-98 4.6 Part# 4

1999 - 2004 Mustang GT 4.6 Part# 6

1994-95 5.0 Part# 5

1994 - 1998 3.8 Mustang Part# 7

Pulley Kit #1150, Ram Air System #1420 (air filter not included Pulley Kit #1100, Ram Air System #1425 (air filter not included)

Pulley Kit #1155, Ram Air System #1420 (air filter not included) Pulley Kit #2170, Ram Air System #1425 (air filter not included)

Serpentine Conversion Kit

Shown with our optional Futura Air Cleaner

Now Oldsmobile owners can get March Performance Style and Reliability. This serpentine conversion kits replaces the troublesome V-belt accessory drive on big block Oldsmobile motors, to eliminate belt slippage and belt throwing. The Street Rod version of this kit allows rotation of the Alt. and A/C to a taller but narrower setup, (see our web site for pictures and info on this kit.) Pulley are standard ratio as OEM to preserve full electrical charging and engine cooling.

Application: 455ci Big block Oldsmobile, Pontiac Firebird.

Kit Includes:

• Combination Alternator power steering bracket with

idler, Alternator relocator arm, tensioners and hardware.

• Crank and water pump pulleys with nose cover • Alternator pulley with fan and nose cover • Remote power steering pump cover with pulley and pulley nose cover

• A/C kit includes A/C bracket with idler, compressor nose cover

• Wing accent • Tensioning rods and rod ends • Grade 8 mounting hardware

Optional Accessories:

Saginaw Power Steering Pump Kit.

• #P315 Remote power steering pump • #9665 March billet alternator • #16011 Wing Accent

Use your old pump and save the cost of remote power steering lines and reservoir

(included in 16070 kit)

Oldsmobile 455ci Kit #Drives

16070 16075 16090 16095 Type of Accessories

Alternator

A/C

Water Pump

YES YES YES YES

YES

YES YES YES YES

GM 6-12 o’clock mounting 6" or 7” diameter alt.

Sanden 505 or 508 serpentine A/C or March P-410

YES

Olds standard short water pump

Remote Reservoir Power Steering

Saginaw Power Steering

YES YES

Olds short forward rotation 1987 Sunbird remote water pump with reservoir pump 5.25” offset

YES YES 1966-74 Saginaw Keyway pump with canister or March Billet pump

Wing Accent

YES Optional YES Optional

Alt. W/P A/C belt size

Alt. W/P P/S belt size

65”

61.5” 65” 61.5” 65”

65”

6 Rib

6 Rib

16

Pontiac V-8 Serpentine Conversion 326, 350, 389, 400, 455 C.I.

This super trick one belt drive system runs off a standard rotation 1969 or later water pump. Using this new serpentine design will totally eliminate any belt throwing and enhance your engine compartment. Requires 1968 - newer balancer (balancer without v-groove)1969 - newer long water pump

Kit Includes: • Crank Pulley. • Water pump pulley and nose cover. • Alt. pulley with fan and nose cover. • Alt. bracket with stainless steel tensioner. • Power steering bracket and pulley. • Power steering front and rear brackets. • Idler pulley with cover.

• A/C clutch cover. • A/C front and rear brackets. • Stainless steel tensioning rod. • Dual Idlers with covers. • All necessary hardware.

Pontiac V-8 Serpentine Kits Kit Number

13100 13105 13110 13120 13125

Alternator

X X X X X

Type of Accessories

GM 6-12 o’clock mounting (P550) - (P555)

A/C

Water pump

X X

X X X X X

Sanden 505 or 508 serpentine A/C

1969 or later long water pump

Saginaw Keyway P/S

Saginaw Press fit P/S

P/S A/C Belt Size

X

49" 66" 66" 94.5" 94.5"

X X X 1971 Grand Prix or equivalent

1978 Firebird or equivalent

Dayco 6 rib

Chrysler Serpentine Kits

Convert from V-Belts to Performance Serpentine Pulleys while you keep your standard bracketry and water pump. System will run your alternator and power steering. March Performance is very “trick” looking 1" wide serpentine belt drive system that simply swaps out with your old low performance v-belt pulleys. Matching “high performance” brackets with stainless steel tensioning rods for perfect belt tensioning.

Kit Includes: • Alternator bracket and tensioning rod • Crank pulley, water pump pulley and nose cover • Alternator pulley with nose cover • Power steering kit includes bracket, tensioning rod and pulley • Air conditioning kit includes A/C bracket, tensioner and A/C nose cover

Small Block

Air Conditioning Kits Available

318-340-360 C.I. Engines Serpentine Kits Kit # Drives

Alternator

40400 40405 40410 40425 40415 40420

yes yes yes yes yes yes

40510 40520 40530 40540 40545

yes yes yes yes yes

40515 40525 40535 40550 40560

yes yes yes yes yes

A/C

Water Pump

yes yes yes

yes yes yes yes yes yes

yes yes

yes yes yes yes yes

yes yes

yes yes yes yes yes

Sanden 505 or 508 serpentine A/C

Standard rotation water pump

383-400 C.I. Engines Serpentine Kits

Big Block

Saginaw Keyway P/S Pump

Saginaw Press Fit P/S Pump

yes yes yes yes

yes yes yes yes

440 C.I. Engines and Mopar Crate Hemi Serpentine Kits

Type of Accessories

Early Chrysler mounting alternator

yes yes yes yes 1966-74 keyway Saginaw pump with canister

1975-78 press fit Saginaw pump with canister

Alternator Belt Size

P/S Belt Size

45" 45" 45" 45" 45" 45"

32.5" 32.5" 46" 50.5" 50.5"

42.5" 42.5" 42.5" 42.5" 42.5"

41" 41" 54.8" 54.8"

43.6" 43.6" 43.6" 43.6" 43.6"

41" 41" 54.8" 54.8"

Dayco 6 rib

Dayco 6 rib

Chrysler Alternator And Power Steering Brackets For V-belt And Serpentine Pulleys

Part# 40020 Big Block 383-400 Alt. Bracket Kit

Part# 40100

Part# 40020-09 NEW LOW COST CUSTOM Big Block 383-400 Alt. Bracket Kit Part# 40010 Big Block 426- 440 Alt. Bracket Kit Part#40010-09 NEW LOW COST CUSTOM Big Block 426 - 440 Alt. Bracket Kit Part# 40051 Small Block 318 -340-360 Alt. Bracket Kit Part# 40051-09 NEW LOW COST CUSTOM Small Block 318 -340-360 Alt. Bracket Kit Part# 40100 Big Block 383-440 Saginaw Power Steering Bracket Kit NOTE: 40100 Requires Saginaw Keyway P.S. pump & March P.S. pulley #540

Part# 40051

Part# 40061 Small Block 318 -340-360 Saginaw Power Steering Kit 1966 - 1977 Saginaw pumps. Part# 40061-09 NEW LOW COST CUSTOM Small Block All its 1966 - 1977 Saginaw pumps. NOTE: 40061 Requires March #513 Keyway or #531 Press Fit Pulley V-Belt.

Part# 40020

NEW LOW COST CUSTOM, Same quality brackets with a economy silver powder coat! 17

Chrysler V-Belts Pulleys Small & Big Block

Performance Series: Increases horsepower by reducing accessory drag. 12 h.p. at rear wheels typical. Eliminates belt throwing. Designed for normal street driving. Power & Amp Series: Increases horsepower by reducing accessory drag. 10 H.P. at rear wheel. Design for vehicle with high amperage needs. EXCELLENT for towing and heavy stop and go driving. Magnum engines only. High Water Flow Series: Increases cooling by speeding up water flow and fan speed. This helps at critical low speed driving where most overheating occurs. Precision CNC machined from billet 6061-T6 aluminum. Finished with a “No-Polishing” clear powdercoat. See color chart on back cover.

1970 LATER SMALL BLOCK 318-340-360 Performance Series Kit # Drives

10210 10250

Crank Pulley

Water Pump Pulley

Alternator Pulley with Nose Cover

Optional Saginaw Keyway P/S pulley

Optional Saginaw press fit P/S pulley

Optional Federal P/S pulley

1V 2V

1V 1V

1V 1V

#530 1V

#531 1V

#532 1V

1V 1V 1V

1V 1V 2V

#530 1V #530 1V

#531 1V #531 1V

#532 1V #532 1V

1V 1V

1V 1V

#530 1V

#531 1V

#532 1V

Power & Amp Series 10225 10265 10270

1V 2V 3V

High Water Flow Series 10350 10370

1V 2V

1967-1969 SMALL BLOCK (273-318-340) Performance Series Kit # Drives

10215 10255

Crank Pulley

Water Pump Pulley

Alternator Pulley with Nose Cover

Optional Saginaw Keyway P/S pulley

Optional Saginaw press fit P/S pulley

Optional Federal P/S pulley

1V 2V

1V 1V

1V 1V

#530 1V

#531 1V

#532 1V

1970 LATER BIG BLOCK 383-440, (HEMI'S CALL) Performance Series Kit # Drives

10010 10050*

Crank Pulley

Water Pump Pulley

Alternator Pulley with Nose Cover

Optional Saginaw Keyway P/S pulley

Optional Saginaw press fit P/S pulley

Optional Federal P/S pulley

1V 2V

1V 2V (replaces 1V)

1V 1V

#530 1V

#531 1V

#532 1V

1V 2V (replaces 1V) 1V

1V 1V 2V

#530 1V #530 1V

#531 1V #531 1V

#532 1V #532 1V

#530 1V

#531 1V

#532 1V

Street Rod Series 10015 10075 10070

1V 2V 4V

Performance Series for Fluidampr Brand Balancers with Flat Face 10150 10170

1V 2V

1V 2V (replaces 1V)

1V 1V

POWER STEERING PULLEYS Chrysler Power Steering Pulleys Part # 530 531 532 645 646

Mfg. OEM Part # 82668 1189 82668 2608

(For individual pulley groove configuration and size see our web site at www.marchperf.com )

Shaft Size Key Way Dim. A 5⁄8 Saginaw Keyway Yes 3⁄4 Saginaw Pressfit No 5⁄8 Federal Pressfit No Dodge Magnum Engine, 7-Rib Pulley matches kit 10510 Dodge Manum Engine, 6-Rib Pulley matches kit 10515 Notes P/S/Style

1st Groove Dim. B. 0.57 1.25 0.45

2nd Groove Dim C.

O.D. Size Dim D. 6 3⁄4 6 7

Serpentine Pulleys Sets

318, 340, 360, 383, 440, C.I. Mopar Performance Crate Hemi & Magnum Performance Series 318-340-360 C.I. Engines Set #

Crank Pulley

Water Pump Pulley

Alternator Pulley

10300 10305

6 rib 6 rib

6 rib 6 rib

6 rib 6 rib

Optional Saginaw Keyway P/S Pump

Optional Saginaw Press Fit P/S Pump

Optional Matching W/P Nose Cover

#533

#534

#327 #327

#620 6 rib

#327 #327

#534

#327 #327

#620 6 rib

#327 #327

Performance Series 383-440 C.I. Engines + Mopar Performance Crate Hemi 10310 10315

6 rib 6 rib

6 rib 6 rib

6 rib 6 rib

#535 6 rib

Performance Series 318-340-360 C.I. Engines Fluidamper with Flat Face 10320 10325

6 rib 6 rib

6 rib 6 rib

6 rib 6 rib

#533

Performance Series 383-440 C.I. Engines Fluidamper with Flat Face 10330 10335

6 rib 6 rib

6 rib 6 rib

6 rib 6 rib

#535 6 rib

Performance Series 1991-1997 Magnum 3.9-5.2-5.9 10510

7 rib

non rib

7 rib

#645 7 rib

Power & Amp Series 1991-1997 Magnum 3.9-5.2-5.9 10515 6 rib non rib 6 rib NOTE: New Fluidamper with recessed face use standard pulley kits

#646 6 rib

18

0"

1"

2"

3"

4"

5"

6"

7"

8"