Manual Mueble.docx

Number 2 5 11 13 3 12 14 9 53 56 -

box 1 of 3 Bottom right side Bottom left side Upper right side Upper left side Bottom divider Upper divider Fixed shelf Movable shelf Transdrawer????? Lower bottom Upper bottom Drawer bottom Manual profile 2105mm Upper profile 1784mm Lower-bottom profile 1784mm

side a 1350 1350 890 890 1220 875 884 668 614 1240 895 644 2105

side b 600 600 600 600 440 440 440 440 110 600 600 407 4000

units 1 1 1 1 1 1 1 1 2 3 3 2 4

1784

1000

1

1784

1000

1

Number -

box 2 of 3 Doors

side a 2105

side b 862

units 2

Number 10

box 3 of 3 Lifted foundation Cover for drawer Fixed shelf Plinth Front belt?? strip??? Back belt-strip Drawer front Drawer’s right side Drawer’s left side Metallic sliders 440mm Oval pipe 1093mm White H profile 890mm White H profile 1220 mm Brochure Hardware bag

side a 1784

side b 440

units 1

670

440

1

884 1784 1784

440 100 100

2 2 1

1784 666 400

100 160 110

1 2 2

400

110

2

2000

2

1093

100

1

-

-

2

-

-

2

-

-

1 1

4 14 6 7 8 52 51 54 -

Before assembling the piece of furniture it is recommended that the user take every piece and places every dowel and accessory and assemble it with the help of other people. In order to avoid scratches or injuries/damages on the piece of furniture, it is recommended

that you assemble the item over the cardboard box. A hammer, a Phillips screwdriver and a measuring tape are required. Do not use an electric screwdriver to place the handles. The screws’ final adjustments must be done manually. The closet bottoms can be used to frame-square the piece of furniture 1. Framing screw. Can be loosen and fastened to assemble the door’s beams-joists vertically 2. Locking screw. Loosen to damp-cushion and fasten to lock it