http://biz.lgservice.com SERVICE MANUAL MODEL : RC797T
VCR+DVD RECORDER SERVICE MANUAL MODEL : RC797T CAUTION BEFORE SERVICING THE UNIT, READ THE “SAFETY PRECAUTIONS” IN THIS MANUAL.
P/NO : AFN32896705
JANUARY, 2007
CONTENTS SECTION SECTION SECTION SECTION SECTION SECTION
1.........SUMMARY 2.........CABINET & MAIN CHASSIS 3.........ELECTRICAL 4.........MECHANISM OF VCR PART (D-37) 5.........LOADER PART (RS-02A) 6.........REPLACEMENT PARTS LIST
1-1
SECTION 1 SUMMARY CONTENTS
PRODUCT SAFETY SERVICING GUIDELINES FOR VCR+DVD RECORDER PRODUCTS ...................................................................................................1-3 SERVICING PRECAUTIONS ....................................................................................................................1-4 • General Servicing Precautions • Insulation Checking Prodedure • Electrostatically Sensitive Devices
THE STEPS FOR CHANGE THE OPTION CODE ............................................................................1-5 UP-DATING PROGRAM .............................................................................................................................1-6 SPECIFICATIONS ........................................................................................................................................1-8
1-2
PRODUCT SAFETY SERVICING GUIDELINES FOR VCR+DVD RECORDER PRODUCTS IMPORTANT SAFETY NOTICE This manual was prepared for use only by properly trained audio-video service technicians. When servicing this product, under no circumstances should the original design be modified or altered without permission from LG Corporation. All components should be replaced only with types identical to those in the original circuit and their physical location, wiring and lead dress must conform to original layout upon completion of repairs. Special components are also used to prevent x-radiation, shock and fire hazard. These components are indicated by the letter “x” included in their component designators and are required to maintain safe performance. No deviations are allowed without prior approval by LG Corporation. Circuit diagrams may occasionally differ from the actual circuit used. This way, implementation of the latest safety and performance improvement changes into the set is not delayed until the new service literature is printed.
CAUTION : Do not attempt to modify this product in any way. Never perform customized installations without manufacturer’s approval. Unauthorized modifications will not only void the warranty, but may lead to property damage or user injury. Service work should be performed only after you are thoroughly familiar with these safety checks and servicing guidelines.
GRAPHIC SYMBOLS The exclamation point within an equilateral triangle is intended to alert the service personnel to important safety information in the service literature. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the service personnel to the presence of noninsulated “dangerous voltage” that may be of sufficient magnitude to constitute a risk of electric shock. The pictorial representation of a fuse and its rating within an equilateral triangle is intended to convey to the service personnel the following fuse replacement caution notice: CAUTION : FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ALL FUSES WITH THE SAME TYPE AND RATING AS MARKED NEAR EACH FUSE.
SERVICE INFORMATION While servicing, use an isolation transformer for protection from AC line shock. After the original service problem has been corrected, make a check of the following:
TIPS ON PROPER INSTALLATION 1. Never install any receiver in a closed-in recess, cubbyhole, or closely fitting shelf space over, or close to, a heat duct, or in the path of heated air flow. 2. Avoid conditions of high humidity such as: outdoor patio installations where dew is a factor, near steam radiators where steam leakage is a factor, etc. 3. Avoid placement where draperies may obstruct venting. The customer should also avoid the use of decorative scarves or other coverings that might obstruct ventilation. 4. Wall- and shelf-mounted installations using a commercial mounting kit must follow the factory-approved mounting instructions. A product mounted to a shelf or platform must retain its original feet (or the equivalent thickness in spacers) to provide adequate air flow across the bottom. Bolts or screws used for fasteners must not touch any parts or wiring. Perform leakage tests on customized installations. 5. Caution customers against mounting a product on a sloping shelf or in a tilted position, unless the receiver is properly secured. 6. A product on a roll-about cart should be stable in its mounting to the cart. Caution the customer on the hazards of trying to roll a cart with small casters across thresholds or deep pile carpets. 7. Caution customers against using extension cords. Explain that a forest of extensions, sprouting from a single outlet, can lead to disastrous consequences to home and family.
FIRE AND SHOCK HAZARD 1. Be sure that all components are positioned to avoid a possibility of adjacent component shorts. This is especially important on items trans-ported to and from the repair shop. 2. Verify that all protective devices such as insulators, barriers, covers, shields, strain reliefs, power supply cords, and other hardware have been reinstalled per the original design. Be sure that the safety purpose of the polarized line plug has not been defeated. 3. Soldering must be inspected to discover possible cold solder joints, solder splashes, or sharp solder points. Be certain to remove all loose foreign particles. 4. Check for physical evidence of damage or deterioration to parts and components, for frayed leads or damaged insulation (including the AC cord), and replace if necessary. 5. No lead or component should touch a high current device or a resistor rated at 1 watt or more. Lead tension around protruding metal surfaces must be avoided. 6. After reassembly of the set, always perform an AC leakage test on all exposed metallic parts of the cabinet (the channel selector knobs, antenna terminals, handle and screws) to be sure that set is safe to operate without danger of electrical shock. DO NOT USE A LINE ISOLATION TRANSFORMER DURING THIS TEST. Use an AC voltmeter having 5000 ohms per volt or more sensitivity in the following manner: Connect a 1500 ohm, 10 watt resistor, paralleled by a .15 mfd 150V AC type capacitor between a known good earth ground water pipe, conduit, etc.) and the exposed metallic parts, one at a time. Measure the AC voltage across the combination of 1500 ohm resistor and .15 mfd capacitor. Reverse the AC plug by using a non-polarized adaptor and repeat AC voltage measurements for each exposed metallic part. Voltage measured must not exceed 0.75 volts RMS. This corresponds to 0.5 milliamp AC. Any value exceeding this limit constitutes a potential shock hazard and must be corrected immediately.
1-3
SERVICING PRECAUTIONS CAUTION: Before servicing the VCR+DVD RECORDER covered by this service data and its supplements and addends, read and follow the SAFETY PRECAUTIONS. NOTE: if unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions in this publications, always follow the safety precautions. Remember Safety First :
Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field effect transistors and semiconductor chip components. The following techniques should be used to help reduce the incidence of component damage caused by static electricity.
General Servicing Precautions 1. Always unplug the VCR+DVD RECORDER AC power cord from the AC power source before: (1) Removing or reinstalling any component, circuit board, module, or any other assembly. (2) Disconnecting or reconnecting any internal electrical plug or other electrical connection. (3) Connecting a test substitute in parallel with an electrolytic capacitor. Caution : A wrong part substitution or incorrect polarity installation of electrolytic capacitors may result in an explosion hazard.
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any electrostatic charge on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging wrist strap device, which should be removed for potential shock reasons prior to applying power to the unit under test.
2. Do not spray chemicals on or near this VCR+DVD RECORDER or any of its assemblies.
3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.
3. Unless specified otherwise in this service data, clean electrical contacts by applying an appropriate contact cleaning solution to the contacts with a pipe cleaner, cotton-tipped swab, or comparable soft applicator. Unless specified otherwise in this service data, lubrication of contacts is not required.
4. Use only an anti-static solder removal device. Some solder removal devices not classified as “anti-static” can generate electrical charges sufficient to damage ES devices.
4. Do not defeat any plug/socket B+ voltage interlocks with which instruments covered by this service manual might be equipped.
6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil,or comparable conductive material).
5. Do not apply AC power to this VCR+DVD RECORDER and / or any of its electrical assemblies unless all solid state device heat sinks are correctly installed. 6. Always connect the test instrument ground lead to an appropriate ground before connecting the test instrument positive lead. Always remove the test instrument ground lead last. Insulation Checking Procedure Disconnect the attachment plug from the AC outlet and turn the power on. Connect an insulation resistance meter (500V) to the blades of the attachment plug. The insulation resistance between each blade of the attachment plug and accessible conductive parts (Note 1) should be more than 1Mohm. Note 1: Accessible Conductive Parts include Metal panels, Input terminals, Earphone jacks,etc.
2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.
5. Do not use freon-propelled chemicals. These can generate an electrical charge sufficient to damage ES devices.
7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed. Caution: Be sure no power is applied to the chassis or circuit, and observe all other safety precautions. 8. Minimize bodily motions when handling unpackaged replacement ES devices. (Normally harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity sufficient to damage an ES device.)
1-4
THE STEPS FOR CHANGE THE OPTION CODE * Note : This procedure must be done when IC1301(On digital Board) or Digital Boardassy Push Switch POWER ON/OFF at remocon or timer keyborad
Select DVD MODE at the set use remocon or timer keyborad
Push REC+ PLAY at timer keyboard
Use remocon and push ENTER
DETECT NEW EEPROM (OPTION EDIT SCREEN) NAME HEX MODELS : RC797T OPT 1 F2 OPT 2 15 OPT 3 93 OPT 4 CF OPT 5 94 OPT 6 C0 OPT 7 04 OPT 8 15 Press ‘Enter” key to Save and Exit
Use Direction Key at remocon (LEFT/RIGHT) for select the position of option
Use Direction Key at remocon (UP/DOWN) for change the option
After finish edit code of option push ENTER at remocon
For finishing and intialized the option code push REC + EJECT at remocon
1-5
UP-DATING PROGRAM BURNING DISC •
For up-dating the DVD program using the disc, it must burning the disc which include the DVD software.
•
For recorder combi set which using the disc downloader program are DVD Program and Loader Program.
•
In 2nd generation for recorder combi can download the DVD program and Loader program one by one, or all together. Number 1
Number 2
* There is two way to format disc DVD Program 1. DVD and LOADER program format in one disc 2. Only DVD program format in one disc
•
If you format like number 1 you’ll see capture like (figure 1)
•
And you have three choice: 1. Main. It’s mean if you chose this it’ll up-dating only DVD prgram. 2. Loader.It’s mean if you chose this it’ll up-dating only Loader program. 3. ALL. It’s mean if you chose this it’ll up-dating DVD and Loader program.
[FIGURE 1]
•
If you format like number 2 you’ll not see capture like figure 1 that give you choices, you have no choice only update DVD program
1-6
DVD UPGRADE INSTRUCTION FORMAT NO 1 1. Press POWER KEY to turn on. 2. After booting, insert the upgrade disc, and you will see massage like [FIGURE 1] 3. Press “PLAY” key (front or remote) and you will see as [FIGURE 2] with remote Chose one of them then Press enter 4. For update both of them [MAIN & LOADER] we chose “ALL” and first you will see [FIGURE 3] DVD update Check the “Current Version” and “ New CD Write Version” and press “PLAY” key. 5. The DVD update will be on progress.And when finish update MAIN Version it’s automatically continue to Update Loader Version and You will see [FIGURE 4] Check the “Current Version” and “New CD Write Version “ and Press “PLAY” key once more 6. The LOADER update will be on progress. And tray will open. 7. Remove the disc and wait until finish 8. The tray will be close and open automatically after completing “UNDER UPDATE” 100% 9. Turn off the unit 10.Turn on again the unit is operation with new software
[FIGURE 1]
[FIGURE 2]
[FIGURE 3]
[FIGURE 4]
FORMAT NO 2 1. 2. 3. 4.
Press POWER KEY to turn on. After booting, insert the upgrade disc, and you will see massage like [FIGURE 1] Press “PLAY” key (front or remote) The DVD update will be on progress. Check the “Current Version” and “New CD Write Version” and Press “PALY” key once more 5. The tray will be open automatically after completing “UNDER UPDATE” 100% 6. Remove the disc and Turn off the unit 7. Turn on again the unit is operation with new software
[FIGURE 1]
[FIGURE 2]
1-7
SPECIFICATIONS • GENERAL Power requirements Power consumption Dimensions (approx.) Net weight (approx.) Operating temperature Operating humidity Television system Recording format
AC 120V / 60Hz RC297H-M : 32W, Others : 24W 430 X 78.5 X 260mm (w x h x d) 4.6 kg 5°C to 35°C 5% to 90% NTSC color system NTSC
• SYSTEM Laser Video head system Signal system • RECORDING Recording format Recordable discs Recordable time
Video recording format Sampling frequency Compression format Audio recording format Sampling frequency Compression format • PLAYBACK Frequency response Signal-to-noise ratio Harmonic distortion Dynamic range
Semiconductor laser, wavelength 650nm Double azimuth 4 heads, helical scanning NTSC DVD VideoRecording, DVD-VIDEO DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable, DVD+Recordable (Double Layer), DVD-Random Access Memory DVD (4.7GB) : Approx. 1 hour (XP mode), 2 hours (SP mode), 4 hours (LP mode), 6 hours (EP mode), 11 hours (MLP mode) DVD+R DL (8.5GB) : Approx. 2 hours (XP mode), 3 hours 40 minutes (SP mode), 7 hours 10 minutes (LP mode), 9 hours (EP mode), 11 hours (MLP mode) 27MHz MPEG 2 48kHz Dolby Digital DVD (PCM 48 kHz) : 8 Hz to 22 kHz, CD : 8 Hz to 20 kHz DVD (PCM 96 kHz) : 8 Hz to 44 kHz More than 100dB (AUDIO OUT connector) Less than 0.008% (AUDIO OUT connector) More than 95dB (AUDIO OUT connector)
• INPUTS ANTENNA IN VIDEO IN AUDIO IN DV IN USB IN
Aerial input, 75 ohms 1.0Vp-p 75ohms, sync negative, RCA jack x 2 -6.0dBm more than 47kohms, RCA jack (L, R) x 2 4 pin (IEEE 1394 standard) 4 pin (USB 1.1 standard)
• OUTPUTS VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT HDMI video/audio Audio output (digital Audio output (optical Audio output (analog
output audio) audio) audio)
1.0Vp-p 75ohms, sync negative, RCA jack x 1 (Y) 1.0V (p-p), 75Ω, negative sync, Mini DIN 4-pin x 1 (C) 0.3V (p-p) 75Ω (Y) 1.0V (p-p), 75Ω, negative sync, RCA jack x 1 (Pb)/(Pr) 0.7V (p-p), 75Ω, RCA jack x 2 19 pin (HDMI standard, Type A) 0.5V (p-p), 75Ω, RCA jack x 1 3V (p-p), 75Ω, Optical connector x 1 2.0Vrms (1KHz, 0dB), 600Ω, RCA jack (L, R) x 2
1-8
SECTION 2 CABINET & MAIN CHASSIS CONTENTS
EXPLODED VIEWS .....................................................................................................................................2-2 1. 2. 3. 4.
CABINET AND MAIN FRAME SECTION ..................................................................................................2-2 DECK MECHANISM SECTION (RS-02A(DR-10A))..................................................................................2-3 DECK MECHANISM SECTION (D37(N))..................................................................................................2-4 PACKING ACCESSORY SECTION...........................................................................................................2-7
2-1
280
452
286
260
283
A50
OPTIONAL PART
261
RC 29 'S
27
284
RC 'S
320
261
A60
A50
/28
B
465
C
CABLE5
2-2 267
261
472
255
463
330
268
467
A52
A
CABLE7
465
DVD
C
463
250
300
272
SMPS
B
A
469
A47
463
274
CABLE8
457
323
HDMI OPTION
A00
462
VCR
469
457
A46
470
OPTIONAL PART
A44
285
A43
462
469
475
476
EXPLODED VIEWS
1. CABINET AND MAIN FRAME SECTION
2. DECK MECHANISM SECTION (RS-02A(DR-10A)) 1431 1001 1003
A60
1002
A001 1030
A002
1437 1025
1038 1432
1041
1026
1017
1036
1432
1433 1013
1011
1016 1020
1432
1015 1012 1014
DR-10 : IN, SH ONLY
1019
A005 1019
DR-10 : PT ONLY
1043
1045
1043
1018
1045
Main C.B.A
1044
A 005 1018
1042
1046
1047 1439
OPTIONAL PART
2-3
3. DECK MECHANISM SECTION (D37(N))
032
103
110
116
115
A24
105
112
113
106
102
100
114
107
A23
109
A21
054
054A
A22
3-1. Front loading mechanism section
2-4
2-5
079
031
011
017
032
022
A01
003
024
012
004
406
008
A03
016
409
007
013
006
014
009
015
405
028
031
027
026
021
029
3-2. Moving mechanism section (1)
OPTIONAL PART
055
518
060
080
051
058
056
410
061
052A
517
052
064
077
067
A11
065
066
032
023
070
069
068
A12
076
078
3-3. Moving mechanism section (2)
2-6
4. PACKING ACCESSORY SECTION
832
810 CABLE ASS'Y RF
806
DISK
CABLE(COAXIAL)
811
PLUG ASS'Y 1WAY
812
PLUG ASS'Y 2WAY
808 BATTERY
900 REMOCON
801 INSTRUCTION ASSEMBLY
804 BAG 803 PACKING 803 PACKING
802 BOX CARTON
2-7
SECTION 3 ELECTRICAL CONTENTS OVERALL WIRING DIAGRAM ...................3-2
• CIRCUIT VOLTAGE CHART...................3-56 PRINTED CIRCUIT DIAGRAMS ..............3-60 1. VCR P.C.BOARD......................................3-60 2. SMPS P.C.BOARD ...................................3-64 3. KEY P.C.BOARD ......................................3-66
VCR PART ELECTRICAL ADJUSTMENT PROCEDURES..................3-3 1. SERVO ADJUSTMENT ..............................3-3
VCR ELECTRICAL TROUBLESHOOTING GUIDE ....................3-4 1. POWER (SMPS) CIRCUIT.........................3-4 2. SYSTEM/KEY CIRCUIT .............................3-8 3. SERVO CIRCUIT........................................3-9 4. Y/C CIRCUIT ............................................3-11 5. HI-FI CIRCUIT ..........................................3-15 6. TUNER/IF CIRCUIT..................................3-18
VDR PART VDR ELECTRICAL TROUBLESHOOTING GUIDE ..................3-70 1. NO COMPONENT VIDEO SIGNAL WHEN PLAYING DISC.............................3-70 2. NO COMPOSITE/S-VIDEO SIGNAL WHEN PLAYING DISC.............................3-71 3. NO TV, EXTERNAL INPUT VIDEO SIGNAL.....................................................3-72 4. WHEN PLAYING DISC, NO AUDIO OUTPUT (IN VCR BOARD) .....................3-73 5. NO OPTICAL/DIGITAL OUTPUT .............3-74 6. NO BOOTING (DISPLAY “HELLOW” ON THE WINDOW) ..................................3-75
WAVEFORMS .................................................3-20 1. AUDIO BLOCK (WHEN 1KHz SIGNWAVE IS OUTPUT)......3-20 2. SERIAL INTERFACE BLOCK (BETWEEN MAIN & I/O)...........................3-22 3. TUNER BLOCK ........................................3-23 4. HDMI BLOCK ...........................................3-24
WAVEFORMS .................................................3-76 1. SYSTEM BLOCK......................................3-76 2. VIDEO BLOCK (COLOR BAR INPUT).....3-78
BLOCK DIAGRAMS .....................................3-26 1. POWER (SMPS) BLOCK DIAGRAM .......3-26 2. TUNER BLOCK DIAGRAM ......................3-28 3. VPS BLOCK DIAGRAM ...........................3-29 4. Y/C BLOCK DIAGRAM.............................3-30 5. HI-FI BLOCK DIAGRAM...........................3-32 6. SYSTEM BLOCK DIAGRAM....................3-34 7. SCART & SWITCH BLOCK DIAGRAM....3-36
BLOCK DIAGRAMS .....................................3-80 1. VDR SET TOTAL BLOCK DIAGRAM.......3-80 2. VDR MAIN H/W BLOCK DIAGRAM.........3-82 3. POWER BLOCK DIAGRAM .....................3-84 4. AUDIO IN/OUT BLOCK DIAGRAM ..........3-86 5. VIDEO IN/OUT BLOCK DIAGRAM ..........3-88 6. DV1394, USB BLOCK DIAGRAM ............3-90
CIRCUIT DIAGRAMS ..................................3-38 1. POWER (SMPS) CIRCUIT DIAGRAM .....3-38 2. TUNER CIRCUIT DIAGRAM ....................3-40 3. A/V CIRCUIT DIAGRAM...........................3-42 4. HI-FI CIRCUIT DIAGRAM ........................3-44 5. SYSTEM CIRCUIT DIAGRAM..................3-46 6. SCART CIRCUIT DIAGRAM (SCART MODEL ONLY)...........................3-48 7. HDMI CIRCUIT DIAGRAM (HDMI MODEL ONLY) .............................3-50 8. VIDEO/AUDIO CODEC, MSP CIRCUIT DIAGRAM ........................3-52 9. KEY CIRCUIT DIAGRAM (7, 8 & 9 TOOL) ........................................3-54
CIRCUIT DIAGRAMS ..................................3-92 1. MPEG (DMN8604) CIRCUIT DIAGRAM .................................3-92 2. DDR, FLASH & RESET CIRCUIT DIAGRAM..................................3-94 3. POWER, LOADER, B TO B CIRCUIT DIAGRAM ....................3-96
• CIRCUIT VOLTAGE CHART...................3-98 PRINTED CIRCUIT DIAGRAMS ............3-100 1. VDR P.C.BOARD....................................3-100 3-1
OVERALL WIRING DIAGRAM
3-2
VCR PART ELECTRICAL ADJUSTMENT PROCEDURES 1. SERVO ADJUSTMENT 1) PG Adjustment • Test Equipment a) OSCILLOSCOPE
b) NTSC MODEL : NTSC SP TEST TAPE
• Adjustment And Specification MODE
MEASUREMENT POINT
ADJUSTMENT POINT
SPECIFICATION
PLAY
V.Out H/SW(TP)
R/C TRK JIG KEY
6.5 ± 0.5H
• Adjustment Procedure a) Insert the SP Test Tape and play. b) Connect the CH1 of the oscilloscope to the H/SW and CH2 to the “VCR VIDEO” TP for the VCR. c) Trigger the mixed Combo Video Signal of CH2 to the CH1 H/SW, and then check the distance (time difference), which is from the selected A(B) Head point of the H/SW signal to the starting point of the vertical synchronized signal, to 6.5H ± 0.5H (416µs, 1H=64µs).
• PG Adjustment Method a-1) Playback the SP standard tape. b-2) Wait for 3seconds with F/P “REC” key and “PLAY” key presseed at the same time. < Digitron[ - - ] > c-3) Repeat the above step(No.b-2), then it finishes the PG adjusting automatically. < Digitron[ PG ] > d-4) Stop the playback, then it goes out of PG adjusting mode after mony the PG data.
• CONNECTION
• WAVEFORM
3-3
VCR ELECTRICAL TROUBLESHOOTING GUIDE 1. POWER (SMPS) CIRCUIT No .5.3VA YES Is the F101 normal?
NO
Replace the F101 (Use the same Fuse)
YES Is the BD101 normal?
NO
Replace the BD101
YES Is the R101 normal?
NO
Replace the R101
YES Is Vcc (13V - 27V) supplied to IC101 Pin2?
NO
Is the D102 normal? NO Check or Replace the D102
YES
IS the D123 normal?
NO
Replace the D123
YES Is there about 2.5V at the IC103 Pin1?
NO
Replace the IC103
YES Is the IC102 normal?
NO
Replace the IC102
YES Is the D122 normal?
NO
Replace the D122
YES Is the D126 normal?
NO
Replace the D126
YES Is the D127 normal?
NO
Replace the D127
YES Is the D128 normal?
NO
Replace the D128
YES Is the D124 normal?
NO
Replace the D124
YES Power Line of Main PCB is short
3-4
VCR ELECTRICAL TROUBLESHOOTING GUIDE VCR MAIN No 5.0V
Is the Vcc(5.3V) supplied to Q801 collector?
NO
Check or Replace the D123
YES Is the Q801 Base “H”?
NO
Check the 33V Line or ZD815
YES Check or Replace the Q801
No REG 12V
Is the Vcc(13V) supplied to Q802 collector?
NO
Check or Replace the D122
YES Is the Q802 Base “H”?
NO
Check the 33V Line or ZD816
YES Check or Replace the Q802
No 33V
Is the Vcc(34V) supplied to Q803 Emittor?
NO
Check or Replace the D126
YES Is the Q804 Base “L”?
NO
YES Check or Replace the Q804
3-5
Check the PWR CTL “H” signal from µ-com
VCR ELECTRICAL TROUBLESHOOTING GUIDE
No Cap Vcc or 13.5VA YES Is the D122 normal?
NO
Replace the D122
YES Power Line of Main PCB is short
No 3.3V YES Is the Vcc(3.8V) supplied to IC153 pin1?
NO
Check or Replace the D127
YES Is the IC153 pin4 “H”?
NO
Check the PWR CTL “H” signal from µ-com
YES Check or Replace the IC153
No 12VL YES Is the Vcc(13.5V) supplied to IC155 pin 1?
NO
Check or Replace the D124
YES Is the IC155 pin4 “H”?
NO
Check the DVD CTL “H” signal from µ-com
YES Check or Replace the IC155
3-6
VCR ELECTRICAL TROUBLESHOOTING GUIDE
No 2.5V YES Is the Vcc(13.5V) supplied to D156 anode?
NO
Check or Replace the D156
YES Is the IC154 pin4 “H”?
NO
Check the DVD CTL “H” signal from µ-com
YES Check or Replace the IC154
No 5VL YES Is the Vcc(5.5V) supplied to IC156 pin1?
NO
Check or Replace the D128
YES Is the IC156 pin4 “H”?
NO
Check the DVD CTL “H” signal from µ-com
YES Check or Replace the IC156
3-7
VCR ELECTRICAL TROUBLESHOOTING GUIDE 2. SYSTEM/KEY CIRCUIT 2-1. AUTO STOP Auto Stop YES Does the H/SW waveform appear at IC501 Pin23?
NO
Check the Drum Motor signal.
YES Do the T-UP Reel Pulses appear at IC501 Pin3?
NO
Do T/UP Reel Pulses appear at the Q501 Base terminal?
NO
YES
YES
YES
Replace the T/UP Reel Sensor (RS501).
Replace IC501.
Does 5.0V appear at the RS501?
Check the Power Circuit.
Note : Auto stop can occur because Grease or Oil has dried up
2-2. The unstable loading of a Cassette tape The unstable loading of a Cassette tape YES Is 12V applied to PMC01 Pin8?
NO
Check the power.
YES Does the “H” signal appear at IC501 Pin32 during inserting of the CST?
NO
YES
YES Does the “L” signal appear at IC501 Pin19 during inserting the CST?
Is 5.0V applied to the R535 ?
Check the CST SW and the peripheral circuitry. NO
Check IC501 Pins86, 87, 88, 89.
YES Check the Deck Mechanism.
3-8
NO
Refer to SMPS 5.3VA troubleshooting.
NO
VCR ELECTRICAL TROUBLESHOOTING GUIDE 3. SERVO CIRCUIT 3-1. Unstable Video in PB MODE Does the Noise level of the screen change periodically? YES Do the CTL pulses appear at IC501 Pin76?
NO
Is adjusting the height of the CTL Head accurate?
NO
Readjust the height of the CTL Head.
YES Does the CFG waveform appear at IC501 Pin67? YES On tracking do the CTL pulses move?
NO
Replace IC501.
YES Does the Video Envelope waveform appear at IC501 Pin82?
NO
Refer to “When the Y signal doesn’t appear on the screen in PB Mode”.
YES Replace IC501.
3-2. When the Drum Motor doesn’t run.
Refer to “(2) No 12VA of Power section”
When the Drum Motor doesn’t run,
Do the Drum PWM Pulses appear at the IC501 Pin34?
YES Does 12V appear at PMC01 Pin8?
NO
YES Check the connector (PMC01) and the Drum Motor Ass’y.
Do the DFG Pulses appear at PMC01 Pin11?
YES
Aren’t the foil patterns and the Components between IC501 Pin34 and PMC01 Pin12 shorted?
YES Does 2.8V appear at PMC01 Pin12?
YES
NO
Replace the Cap M.
NO Do the DFG Pulses appear at IC501 Pin65?
NO
Aren’t the foil patterns and the Components between IC501 Pin65 and PMC01 Pin11 shorted?
YES Do the Drum PWM Pulses appear at IC501 Pin34? YES
NO
Replace IC501.
Are the connecting patterns and the Components between IC501 Pin34 and PMC01 Pin12 shorted?
3-9
NO
VCR ELECTRICAL TROUBLESHOOTING GUIDE 3-3. When the Capstan Motor doesn’t run, When the Capstan Motor doesn’t run,
Does 12.5VA appear at PMC01?
NO
Refer to “SMPS(CAPSTAN/13.5VA) Trouble Shooting”.
YES Does 2.8V appear at PMC01?
NO
YES Check the PMC01 and the Capstan Motor Ass’y. Does the PWM signal appear at IC501 Pin108?
YES Aren’t the foil patterns and Components between IC501 Pin33 and PMC01 Pin9 short?
NO Does the CFG signal appear at PMC01 Pin1?
YES Does the CFG signal come into IC501 Pin67?
NO
NO
Check the Capstan Motor Ass’y.
YES Does the Capstan PWM signal appear at IC501 Pin33?
Aren’t the foil patterns and component between IC501 Pin67 and PMC01 Pin1 shorted?
NO
YES Aren’t the foil patterns and Components between IC501 Pin33 and PMC01 Pin9 shorted?
Replace IC501.
3-4. Keys do not working Keys do not working YES Is 5V applied to IC501 Pin36?
NO
Refer to “SMPS 5.3VA Trouble Shooting”.
YES Does CLOCK LED change when a function button is pressed?
NO
Replace the defective switches.
3-10
VCR ELECTRICAL TROUBLESHOOTING GUIDE 4. Y/C CIRCUIT 4-1. No Video in EE Mode, No Video in EE Mode YES Does the Video signal appear at IC301 Pin15?
NO
Check the IC901 Pin42.
YES Is REG 5.0V applied to IC301 Pins4, 22, 47, 50, 52, 60, 84, 92?
NO
Check the 5.0V, 5.3VA Line. (Power Circuit)
NO
Is I2C BUS signal applied to IC301 Pins73, 74?
YES Does the Video signal appear at IC301 Pin29?
NO
Check the Video Buffer Q310.
NO
Check the DVD Board Video path.
NO
IC901 Pins30(5V), 14(REG12V) Pins31, 32 (I2C BUS)
YES Does the Video signal appear at the IC901 Pin39?
Check C327. (AGC) YES
YES Does the Video signal appear at the PVM01 Pin6?
Check the System Circuit. (Refer to “SYSTEM I2C BUS CHECK Trouble Shooting”)
YES
YES Does the Video signal appear at IC401 Pin29?
NO
YES Check the Cable or RCA Jack
3-11
Replace IC301.
VCR ELECTRICAL TROUBLESHOOTING GUIDE 4-2. When the Y(Luminance) signal doesn’t appear on the screen in PB Mode, When the Y(Luminance) signal doesn’t appear on the screen in PB Mode, YES Is 5.0V 5.3VA applied to IC301 Pins22, 47, 50, 52, 60, 84?
NO
Check the line of the 5.0V 5.3V Line. (Power Circuit)
NO
Refer to “SYSTEM I2C BUS CHECK Trouble Shooting”.
YES Is I2C BUS signal applied to the IC301 Pins73, 74? YES Does the normal RF signal appear at IC301 Pin76?
NO
Is the V.H.S/W signal applied to IC301 Pin80?
NO
Check the System Circuit. (IC501 Pin23)
NO
Check the V.H.S/W level. (Check R342)
YES YES
Is the V.H.S/W “H” about 3.4V at the IC301 Pin80? YES
Does the Y(Luminance) RF signal appear at IC301 pin79?
Clean the Drum.
3-12
NO
Check the IC301.
VCR ELECTRICAL TROUBLESHOOTING GUIDE 4-3. When the C(Color) signal doesn’t appear on the screen in PB Mode, When the C(Color) signal doesn’t appear on the screen in PB Mode, YES Is 5.0V 5.3VA applied to the IC301 Pins24, 42, 55, 72, 81.
NO
Check the line of the 5.0V 5.3VA Line. (Power Circuit)
YES Does the waveform RF signal appear at IC301 pin76?
NO
Replace the IC301.
YES Does the Color signal appear at IC301 Pin25?
NO
Does the X301 (4.43MHz) osxillate?
NO
Replace the X301.
YES
YES
Does the Color signal appear at IC301 Pin48?
YES
Replace the IC301.
Replace the IC301.
3-13
NO
Check the Color Pass.
VCR ELECTRICAL TROUBLESHOOTING GUIDE 4-4. When the Video signal doesn’t appear on the screen in REC Mode, When the Video signal doesn’t appear on the screen in REC Mode, YES Is the EE signal normal?
NO
Check EE Mode.
YES Is 5.0V 5.3VA applied to the IC301 Pins22, 41, 47, 50, 52, 60, 84?
NO
Check the line of the 5.0V 5.3VA line. (Power Circuit)
YES Does PB Mode operate nomally?
NO
Check PB Mode.
YES Does the RF signal appear at the IC301 Pin76?
NO
Is the REC “H” signal (about 4V) applied to the Q307?
NO
Check the System of REC “H”.(the IC501 Pin27)
YES Check REC Luminace pass & Color pass.
NO
Check the circuit of the IC301 Pin85, 86.
YES
YES Does the REC RF signal appear at the IC301 Pins88, 89, 94, 95?
NO
YES Check the Drum & Drum Connector
3-14
Replace the IC301.
VCR ELECTRICAL TROUBLESHOOTING GUIDE 5. Hi-Fi CIRCUIT 5-1. No Sound(EE Mode) No Sound.
YES Check the TU Audio of IC801 Pins2, 3.
NO
Check the DVD Audio of IC801 Pins4, 5.
NO
Check the AV1 Audio of IC801 Pins6, 7.
NO
Check the DTV Audio of IC801 Pins8, 9.
NO
Check the AV2 Audio of IC801 Pins10, 11.
NO
Check the IC401 Pins106, 107.
Check the IC402 Pins14, 15.
Check the RCA Jack.
Check the TUNER
Check the front Jack.
YES
Check the Vcc of IC801 Pins34, 40, IC901 Pins14, 30.
Check the Power 5.0V, 12V. NO
YES Check the IIC Clock and DATA at IC801 Pins42, 43.
NO
Check the IC501 Pins17, 18.
YES Check the Audio of IC801 Pins16, 17.
NO
Replace IC801.
YES Check the IC401 Pins120, 121.
NO
Check the Pcb Pattern between IC801 Pin16, 17 and IC401 Pins120, 121.
YES Check the Digital Audio path between IC401 and DVD Board.
3-15
VCR ELECTRICAL TROUBLESHOOTING GUIDE 5-2. Hi-Fi Playback PB mode YES No Sound. YES Check the Vcc of IC801 (Pins34, 40)
NO
Check Power 5.0V, 12V.
YES Check the Hi-Fi Selection switch. (IC801 Pin41) and the Tape quality.
NO
Check IC501 Pin26 (A.H/SW)
YES Is the RF Envelope at IC801 Pin44 over 2Vp-p?
NO
YES Check IC801 Pin42(Data), Pin43 (Clock)
NO
Check the parts of µ-COM (IC501 Pins17, 18)
NO
Check the Connection at P3D01 Pins7, 9.
NO
Check the 2C 402 Pins14, 15.
YES Do Audio Signals appear at IC801 Pin16(L-CH), 17(R-CH)? YES Do Audio Signals appear at IC901 Pins37, 38.
YES YES
Do Audio Signals appear at JK901, JK905?
Check the IC901 Pins11, 12.
NO
Check the Jack (JK901,JK905)
3-16
NO
Check the DVD Board Audio path
VCR ELECTRICAL TROUBLESHOOTING GUIDE 5-3. Hi-Fi REC. Hi-Fi REC. YES It can’t be recorded Hi-Fi Audio signal. YES Check Vcc of IC801. (Pins34. 40)
NO
Check Power 5V, 12V.
NO
Check ports of µ-COM. (IC501 pins 17, 18)
YES Check IC801 Pin42(Data), Pin43(CLOCK). YES Do Audio signals appear at IC801 Pins16, 17?
Check Audio input signal of IC801 Pins2, 3(TU.A.), 4, 5(DVD.A.), 6, 7(AV1.A), 10, 11(AV3.A).
NO
YES Do FM Audio signals appear at IC801 Pin36?
NO
Replace IC801.
YES Check the Contact Point of Drum Connector if good then Replace the Drum.
3-17
VCR ELECTRICAL TROUBLESHOOTING GUIDE 6. TUNER/IF CIRCUIT 6-1. No Picture on the TV screen No Picture on the TV screen YES Does the Video signal appear at TU701 Pin16.
NO
Is 33V applied to TU701 Pin14?
NO
Check 33V line.
YES Is +5V applied to TU701 Pin3?
NO
Check 5V line.
NO
Check the llC Clock Signal of µ-COM Pin18.
YES Does the Clock signal appear at TU701 Pin9?
YES
YES Does the data signal appear at TU701 Pin10? YES Check the Connection at P3D01 Pins7, 9. Does the video signal appear at IC901 Pin7.
NO
Check the Pattern between TU701 Pin19 and IC901 Pin7.
YES Does the Video signal at the IC901 Pin42.
NO
Replace the IC901.
YES Does the Video signal at the IC301 Pin15.
NO
Check the Pattern between IC901 Pin42 and IC301 Pin15.
YES Does the Video signal at the IC301 Pin 29. YES
NO
Does the video signal at the IC401 Pin29.
NO
Check the Pattern between IC301 Pin29 and IC401 Pin29
NO
Check the DVD Board Video path (Check PMV01, PMV02)
Replace the IC301.
YES Does the Video signal at the IC901 Pin15. YES Does the Video signal at the IC901 Pin39.
NO
Replace the IC901.
YES Check the Pattern between IC901 Pin39 and RCA Jack
3-18
Check the llC Data Signal of µ-COM Pin17.
VCR ELECTRICAL TROUBLESHOOTING GUIDE 6-2. No Sound No Sound YES Check the Vcc(D1.8V) of IC401 Pins3, 18, 48, 69...
NO
Check D1.8V Line.
NO
Check D3.3V Line.
NO
Check the Tuner SIF of TU701 Pin15.
NO
Replace X401
NO
I2C(SCL, SDA) at PVM01 Pins4, 6.
NO
Replace IC401
NO
Check the IIC Clock and Data at IC801 Pins42, 43.
NO
Check the DVD Board Audio Path.
YES Check the Vcc(D3.3V) of 2C401 Pins5, 59, 67... YES Check the Tuner SiF signal at IC404 Pin33. YES Check the oscillator of IC404 Pins53, 54. YES Check the I2C at IC401 Pins 44, 45 YES Check the Audio of IC401 Pins106, 107. YES Check the Audio of IC801 Pins16, 17. YES Check the Audio of IC401 Pins120, 121. YES Check the “No Sound(EE_mode)”
3-19
WAVEFORMS 1. AUDIO BLOCK (WHEN 1KHz SIGNWAVE IS OUTPUT)
1 2 3 4
1 2
AOUT_FSYNC
AOUT_SCLK
3 4
AOUT_D0
AOUT_MCLK 3-20
IC1101
5
5
SPDIF_OUT
6 7 7
A-OUT_R & A-OUT_L
3-21
6
2. SERIAL INTERFACE BLOCK (BETWEEN MAIN & I/O) 4
2 3 1
1
2
SIO_SPI_CLK
SIO_SPI_MOSI
3
4
SIO_SPI_MISO
SIO_SPI_CS0 / CS1 3-22
3. TUNER BLOCK
IC401
1
1
SIF
3-23
4. HDMI BLOCK 1
IC1601
1
576i/576p mode : 54MHz VOUT_CLK
2
2
720p/1080i mode : 54MHz VOUT_CLK
3-24
MEMO
3-25
BLOCK DIAGRAMS 1. POWER (SMPS) BLOCK DIAGRAM
3-26
3-27
2. TUNER BLOCK DIAGRAM
3. VPS BLOCK DIAGRAM
VPS BLOCK
3-28
3-29
4. Y/C BLOCK DIAGRAM
3-30
3-31
5. HI-FI BLOCK DIAGRAM
3-32
3-33
6. SYSTEM BLOCK DIAGRAM
3-34
3-35
7. SCART & SWITCH BLOCK DIAGRAM
3-36
3-37
IMPORTANT SAFETY
NOTE :
WHEN SERVICING THIS CHASSIS, UNDER NO CIRCUMSTANCES SHOULD THE ORIGINAL DESIGN BE MODIFIED OR ALTERED WITHOUT PERMISSION FROM THE LG CORPORATION. ALL COMPONENTS SHOULD BE REPLACED ONLY WITH TYPES IDENTICAL TO THOSE IN THE ORIGINAL CIRCUIT. SPECIAL COMPONENTS ARE SHADED ON THE
CIRCUIT DIAGRAMS 1. POWER (SMPS) CIRCUIT DIAGRAM
SCHEMATIC FOR EASY IDENTIFICATION. THIS CIRCUIT DIAGRAM MAY OCCASIONALLY DIFFER FROM THE ACTUAL CIRCUIT USED. THIS WAY, IMPLEMENTATION OF THE LATEST SAFETY AND PERFORMANCE IMPROVEMENT CHANGES INTO THE SET IS NOT DELAYED UNTIL THE NEW SERVICE LITERATURE IS PRINTED.
1. Shaded( ) parts are critical for safety. Replace only with specified part number. 2. Voltages are DC-measured with a digital voltmeter during Play mode.
5.3VA No Power D123 is Defective
No Power BD101, R101 is Defective
13VA No Power D122 is Defective
33V No Power D126 is Defective S/W Error IC101, IC104 is Defective
3.3V No Power IC153 is Defective
No Power D102 is Defective
3.8VA No Power D127 is Defective
2.5V No Power IC154, D156 are Defective No Power F101 is Defective
13VA No Power D124 is Defective
5.5VA No Power D128 is Defective
12V No Power IC155 is Defective
5V No Power IC156 is Defective
Switching Error IC102, IC103 are Defective
PCB : EAX31383101
3-38
3-39
2. TUNER CIRCUIT DIAGRAM
3-40
3-41
3. A/V CIRCUIT DIAGRAM WAVEFORMS IC301 Oscilloscope Waveform
1
14
11
2
13
10
IC301 Pins 8, 9 PB mode 500mvp-p
8
9
7
3
IC301 Pins 15, 17, 19, 21 Video in 1Vp-p
4
IC301 Pin 31 PB/REC mode 4.0Vp-p
12
5
IC301 Pin 98 REC mode 1.1Vp-p
6
5 IC301 Pin 94 REC mode 2.0Vp-p
7
4
1
2
IC301 Pin 29 PB mode 2.02Vp-p
8
6 IC301 Pin 57 PB mode 400mVp-p
3
10
9
2
IC301 Pin 63 PB mode 400mVp-p
IC301 Pin 73 PB/REC mode 5Vp-p
12
11
IC301 Pin 77 REC mode 340mVp-p
3-42
3-43
13
IC301 Pin 42 PB mode 300mVp-p
IC301 Pin 74 PB/REC mode 5Vp-p
14
IC301 Pin 53 PB mode 400mVp-p
IC301 Pin 80 PB mode 3.6Vp-p
4. HI-FI CIRCUIT DIAGRAM
3-44
3-45
5. SYSTEM CIRCUIT DIAGRAM
4
3
WAVEFORMS
6
IC501 Waveform Photographs
1
5
1
2
7 V.HSW (IC501 Pin 23) 1V/10mS REC/PB MODE
2
3
DV.SYNC (IC501 PIN 24) 1V/100uS QUE/REV MODE
4
CTL(+) (IC501 Pin 74) 1V/10mS
5
6
DFG/DFG (IC501 PIN 65) 1V/10mS REC/PB MODE
7
V.IN (IC501 Pin 49) 500mV/20uS
3-46
3-47
CTL(-) (IC501 Pin 75) 1V/10mS
CFG (IC501 Pin 67) 1V/10mS
6. SCART CIRCUIT DIAGRAM (SCART MODEL ONLY)
3-48
3-49
7. HDMI CIRCUIT DIAGRAM (HDMI MODEL ONLY)
3-50
3-51
8. VIDEO/AUDIO CODEC, MSP CIRCUIT DIAGRAM
3-52
3-53
9. KEY CIRCUIT DIAGRAM (7, 8 & 9 TOOL)
3-54
3-55
• CIRCUIT VOLTAGE CHART MODE EE PLAY PIN NO. IC301 (HA118725) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
20m 20m 20m 1.95V 1.94V 2.6V 2.8V 2.5V 2.04V 1.8V 2V 1.6V 0V 1.26V 3.04V 0V 2.38V 1.88V 3.02V 0V 2.38V 4.88V 2.64V 0V 2.08V 3.08V 0V 150m 3.88V 2.08V 4.74V 2.08V
100m 100m 100m 4.88V 1.88V 3.12V 2.74V 1.7V 1.3V 1.88V 1.8V 0.72V 0V 1.3V 3.36V 4.78V 2.32V 2.84V 2.94V 0V 2.34V 4.82V 2.24V 0V 2.14V 2.66V 0V 140m 3.18V 2.74V 4.72m 2.12V
MODE PIN NO.
EE
52
4.8V
53
TR MODE PIN NO.
EE
MODE PIN NO.
EE
4.7V
3
4.84V
4.84V
55
1.88V
1.88V
2.6V
2.8V
4
4.64V
4.58V
56
0V
0V
54
0V
0V
5
4.56V
4.56V
57
0V
0V
55
1.3V
56
0V
1.48V
6
80m
60m
58
120m
120m
0V
7
0V
0V
59
4.92V
4.92V
57 58
2.08V
2.18V
8
4.98V
4.98V
60
4.92V
4.92V
1.78V
2.14V
9
4.98V
5.3V
61
0V
59
0V
4.6V
4.62V
10
4.8V
4.8V
62
4.82V
4.82V
60
4.62V
4.62V
11
4.82V
4.82V
63
3.98V
3.98V
61
3.82V
0V
12
4.72V
4.82V
64
0V
0V
62
2.2V
2.08V
13
4.92V
4.92V
65
2.36V
2.63V
63
2.32V
2.32V
14
5.02V
5.02V
66
0V
0V
64
1.62V
1.64V
15
0V
0V
67
4.68V
9.68V
65
1.62V
2.28V
16
4.98V
4.98V
68
0V
0V
66
2.3V
1.68V
17
5.04V
5.04V
69
2.48V
2.48V 2.48V
PLAY
PLAY
PLAY
67
0V
0V
18
4.98V
9.98V
70
2.48V
68
1.12V
1.14V
19
2.46V
2.46V
71
0V
0V
69
2.3V
2.38V
20
3.36V
3.36V
72
2.48V
4.98V
70
0.82V
0.82V
21
0V
0V
73
4.92V
4.92V
71
2.2V
2.18V
22
0V
0V
74
0V
0V
72
100m
2.42V
23
4.96V
4.96V
75
2.52V
2.42V
73
4.96V
4.98V
24
120m
140m
76
2.42V
2.48V
74
4.96V
4.98V
25
4.94V
4.94V
77
80m
80m
75
2.56V
2.54V
26
4.92V
4.92V
78
0V
0V
76
2.34V
2.18V
27
20m
20m
79
4.02V
4.96V
77
2.68V
2.64V
28
5.02V
5.02
80
4.96V
4.96V
78
0V
4.72
29
4.98V
4.98V
81
2.8V
280m
79
0V
0V
30
4.84V
4.84V
82
1V
2.62V
80
2.16V
2.68V
31
5V
5V
83
120m
3.24V
81
4.06V
20m
32
0V
0V
84
0V
1.96V
82
0V
0V
33
4.98V
4.94V
85
0V
0V
83
120m
2.72V
34
0V
5V
86
4.98V
4.9V
84
2.76V
4.74V
35
5.02V
0V
87
4.98V
4.98V
33 34
2.42V 1.58V
2.26V 1.54V
85
2.114V
2.42V
36
3.16V
4.94V
88
5V
86
2.04V
2.08V
37
5.7V
Da/Clk(5.5)
89
0V
0V
35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
3.3V 2.5V 3.1V 2.6V 1.4V 2.3V 1.08V 1.82V 2.04V 0V 2.88V 2V 4.82V 120mV 3.48V 4.78V 2.08V
3.36V 2.32V 3.18V 2.28V 1.42V 2.16V 1.58V 1.84V 2.28V 0V 3.04V 2.98V 4.78V 2.4V 1.94V 4.74V 1.98V
87
2.04V
2.08V
38
0V
5.7V
90
4.88V
4.88V 0V
5V
88
0V
0V
39
520m
0V
91
0V
89
2.14V
2.08V
40
4.84V
520m
92
0V
0V
90
2.14V
2.08V
41
4.83V
Da/Clk(5.62)
93
5.04V
5.04V
91
2.14V
2.08V
42
4.86V
4.86V
94
4.88V
0V
92
4.88V
4.89V
43
0V
0V
95
4.98V
4.98V
93
300m
260m
44
5.02V
5V
96
0V
0V
94
2.48V
2.4V
45
0V
0V
97
0V
0V
95
2.48V
1.86V
46
3.94V
3.94V
98
4.98V
4.98V
96
2.06V
1.86V
47
2.88V
2.88V
99
20m
4.98V
97
0V
0V
48
0V
0V
100
0V
0V
98
2.30V
2.46V
49
0.98V
2.94V
IC801 (TDA9505H)
99
0V
20m
50
1.84V
1.94V
1
3.28V
3.24V
100
2.48V
2.42V
51
0.98V
4.78V
2
3.28V
3.28V
52
3.28V
3.28V
3
3.32V
3.26V
IC501 (MM01D10F) 1
0V
0V
53
2.38V
2.38V
4
3.28V
3.92V
2
4.52V
4.82V
54
2.52V
2.54V
5
3.28V
3.92V
3-56
MODE PIN NO.
EE
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
3.28V 3.28V 3.28V 3.28V 3.28V 3.28V 0V 3.78V 0V 0V 5.82V 5.82V 0V 6.28V 6.28V 4.46V 3.28V 3.62V 3.74V 3.74V 0.1V 0V 3.7V 3.66V 0.7V 3.72V 3.74V 3.62V 13.4V 3.62V 13.4V 580m.
38 39 40 41 42 43 44
0V
0V
0V 4.7V 0V 5V 5V 20m
20m 4.76V 1.68V 5.04V 4.96 3.38
PLAY 3.26 3.74V 3.24V 3.24V 3.24V 3.26V 0V 4.52V 0V 640m 6.64V 6.68V 620m 6.66V 6.72V 4.42V 4.02V 3.68V 4.12V 3.76V 640m 0V 3.68V 3.64V 680m 3.72V 4.08V 3.68V 13.32V 520m 520V 520V
LOCA. NO.
SPEC
E
POWER ON C
Q501 Q502 Q503 Q504 Q509 Q510 Q508
KRC103M KRC103M KTA1273 KTC3875S A1504 A1504 KTA1273
.000V .010V 4.490V .000V 2.150V 2.100V 5.170V
.030V .030V 5.160V .020V .000V .000V 5.120V
Q301 Q302 Q305 Q306 Q307 Q303 Q310 Q201
2SC5344 STB1277 KTC3875S KTC3875S KRA103S DTC124EK KTA1504 KTA1504
0.19 5.03 0.01 0.01 5.05 0.00 2.14 2.12
0.19 0.18 0.01 0.00 5.00 5.05 0.01 0.00
E
PB C
B
.010V .010V 4.460V 0.010V 3.040 3.030 5.140V
5.030V 5.030V 5.130V 0.020V 0.010V 0.010V 5.050V
4.830V 4.830V 5.140V 0.680V 2.380 2.380 4.400V
0.18 0.08 0.01 0.00 5.01 5.05 0.01 0.00
0.01 5.03 0.71 0.72 0.04 0.04 2.38 2.38
.010V .010V
.010V .010V
5.110 11.62 34.10 0.01
5.230 13.58 33.90 0.01
5.880 12.28 33.40 0.66
B
PART : SYSTEM 4.880V 4.870V 5.170V .680V 1.490V 1.500V 4.450V
PART : AVCP 0.01 5.03 0.70 0.71 0.05 0.05 1.49 1.50
0.18 5.03 0.01 0.00 5.05 0.00 3.05 3.05
PART : AV DECODER Q403 Q404
KRC103S KRC103S
.000V .000V
.010V .010V
.010V .010V
.000V .000V
Q801 Q802 Q803 Q804
STD1862LY STD1862LY KTA1268 KTC3198
5.120 11.61 34.00 0.01
5.230 13.60 33.90 0.01
Q904 Q906 Q901 Q907 Q908 Q902 Q903 Q909
KRC103S KRC103S KTA1504 KTA1504 KTA1504 KTC3875S KTC3875S KTC3875S
.000V .000V 5.250V 5.250V 2.450V .000V .000V .000V
.040V .040V 5.230V 5.230V .000V .010V .010V .010V
4.240V 4.250V 4.520V 4.520V 1.780V .700V .700V .070V
.000V .000V 5.240V 5.240V 2.450V .000V .000V .000V
4.750V 4.750V -.370V -.340V 1.780V -.050V -.020V .010V
.010V .000V 4.740V 4.730V 1.620V -.660V -.470V .070V
Q910 Q911 Q912 Q913 Q914
KTC3875S KTC3875S KTC3875S KTC3875S KTC3875S
.230V .000V .000V .000V .000V
5.040V .010V .010V .010V .010V
.020V .690V .690V .070V .070V
1.000V .000V .000V .000V .000V
5.050V .000V .000V .010V .010V
.020V -.270V -.360V .070V .070V
4.480V 4.940V .000V .000V
.000V .000V 2.220V .780V
PART : HI-FI/F.JACK/AMP 5.900 12.26 33.30 0.66
PART : JACK
PART : TUNER & VPS Q7S1 Q7S2 Q7V1 Q7W1
3-57
KTC3875S KRC103S KTA1504 KTA1504
.000V .000V 2.880V 1.460V
4.480V 4.940V .000V .000V
.000V .000V 2.220V .780V
.000V .000V 2.880V 1.450V
REMARKS
CAPACITOR POWER ON PB VOLTAGE(+) VOLTAGE(-) VOLTAGE(+) VOLTAGE(-) REMARKS
LOCA. NO.
SPEC
C502 C507 C515 C521 C524 C533 C542 C544 C546 C547 C554 C555 C556
47uF/50V 47uF/25V 4.7uF/50V 47uF/6.3V 470uF/6.3V 1000uF/6.3V 47uF/6.3V 1uF/16V 33uF/16V 10uF/16V 22uF/16V 22uF/16V 100uF/16V
13.990V 13.990V 4.280V 5.180V 5.170V 5.060V 5.160V 2.120V 2.140V 5.050V 2.590V 2.620V 2.620V
C301 C303 C305 C308 C309 C310 C314 C317 C319 C327 C328 C329 C331 C337 C339 C340 C343 C350 C353 C355 C358 C359 C361 C364 C366 C203 C204 C207 C210 C213 C215
47u/6.3V 0.33u/50V 4.7u/50V 4.7u/50V 22u/16V 22u/16V 47u/16V 10u/16V 10u/16V 2.2u/50V 47u/6.3V 1.0u/50V 1.0u/50V 0.1u/50V 3.3u/50V 10u/16V 47u/6.3V 47u/6.3V 3.3u/50V 2.2u/50V 1.0u/50V 4.7u/50V 1.0u/50V 0.33u/50V 47u/6.3V 1.0u/50V 1.0u/50V 0.47u/50V 0.47u/50V 2.2u/50V 47u/16V
5.04 0.38 2.51 2.32 2.53 2.59 0.35 2.05 2.84 2.03 5.04 2.81 2.81 2.51 1.52 3.53 4.99 5.00 2.99 2.97 1.03 2.74 2.81 4.71 4.94 3.55 0.41 1.84 1.89 1.99 4.82
C401 C402 C406 C435 C443
47u/6.3V 47u/6.3V 47u/6.3V 47u/6.3V 47u/6.3V
3.22 1.80 3.24 1.80 1.78
PART : SYSTEM -.010V -.010V .000V .000V .000V .010V .000V 2.050V 1.200V .000V .000V 2.620V .010V
13.600V 13.600V .110V 5.140V 5.120V 4.750V 5.120V 2.990V 3.040V 5.030V 2.560V 2.560V 2.560V
.010V .000V .000V .000V .000V .010V .000V 2.560V 1.950V .000V .000V 2.550V .000V
5.03 0.37 2.49 2.57 2.53 2.59 0.30 2.04 2.84 1.91 5.03 2.81 2.81 2.33 1.46 3.17 4.98 5.00 3.10 3.10 0.95 2.74 2.81 4.77 4.93 3.55 3.74 1.82 2.48 1.96 4.78
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.38 1.90 0.00 2.13 0.00 0.00 0.00 0.00 0.00 0.00 0.52 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
PART : AV DECODER 0.00 0.00 0.00 0.00 0.00
3.22 1.80 3.24 1.80 1.78
0.00 0.00 0.00 0.00 0.00
SPEC
C454 C468 C470 C474 C492 C493
47u/6.3V 47u/6.3V 10u/16V 47u/6.3V 47u/6.3V 10u/16V
3.25 3.25 1.62 3.24 5.06 2.53
C806 C807 C808 C809 C812 C814 C815 C816 C817 C818 C820 C822 C825 C834 C835 C848 C850 C853 C855 C858 C859 C863 C864 C865 C866 C867 C868 C875 C876 C878
10uF/16V 0.47uF/50V 10uF/16V 10uF/16V 10uF/16V 47uF/16V 10uF/16V 10uF/16V 10uF/16V 47uF/16V 10uF/16V 47uF/16V 47uF/16V 10uF/16V 10uF/16V 47uF/16V 22uF/16V 22uF/16V 22uF/16V 22uF/16V 22uF/16V 220uF/6.3V 10uF/50V 4.7uF/50V 4.7uF/50V 22uF/16V 22uF/16V 220uF/6.3V 470uF/6.3V 10uF/16V
.030V .090V 6.070V 6.070V 3.860V 3.880V .770V 3.870V .770V 3.880V 3.870V 11.680V 5.000V 6.900V 6.900V 11.780V 5.250V 5.250V 5.250V 5.250V 5.250V 5.110V 11.790V 5.850V 12.400V 2.560V 2.560V 5.220V 1.310V 1.800V
0.00 0.00 0.00 0.00 0.00 0.00
3.25 3.24 1.62 3.24 5.06 2.52
0.00 0.00 0.00 0.00 0.00 0.00
PART : HI-FI/F.JACK/AMP <-1u/50V
PART : AVCP 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.40 2.24 0.00 2.13 0.00 0.00 0.00 0.00 0.00 0.00 0.43 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
POWER ON PB VOLTAGE(+) VOLTAGE(-) VOLTAGE(+) VOLTAGE(-) REMARKS
LOCA. NO.
.000V .000V .010V .010V .000V .000V .000V .000V .000V .000V .000V .000V .000V 6.070V 6.080V .000V .000V 2.560V 2.560V .000V .000V .000V .000V .000V .000V 2.270V 2.400V .000V .000V .000V
.030V .680V 6.070V 6.070V 3.820V 3.870V .770V 3.870V .760V 3.880V 3.900V 11.630V 4.970V 6.800V 6.800V 11.720V 5.220V 5.220V 5.220V 5.230V 5.220V 5.100V 11.730V 5.850V 12.360V 2.550V 2.550V 5.220V 1.310V 1.800V
.000V .010V .010V .000V .000V .000V .000V .000V .000V .000V .000V .000V .000V 6.060V 6.070V .000V .000V 2.550V 2.550V .000V .000V .000V .000V .000V .000V 2.610V 2.370V .000V .000V .000V
->4.7u ->4.7u
47u/16V 47u/16V 10u/16V 10u/16V 10u/16V 10u/16V 1u/50V 10u/16V 10u/16V 10u/16V 10u/16V 10u/16V 22u/16V 470u/6.3V
5.030V 11.770V 1.390V 1.060V 6.890V 6.890V 2.280V 1.450V 6.890V 6.890V 1.360V 1.450V 2.410V 2.460V
3-58
.010V .000V .000V .000V 1.340V .780V 2.360V .430V .010V .010V .350V .430V .000V 1.800V
4.950V 11.720V 1.300V 1.040V 6.810V 6.810V 2.280V 1.520V 6.810V 6.810V 1.520V 1.520V 2.380V 2.420V
.010V .000V .000V .000V 1.010V 1.010V 2.090V .520V .010V .010V .520V .520V .000V .010V
3-59
SPEC
C961 C962 C963 C964 C965 C966 C967 C968 C969 C970 C984
470u/6.3V 470u/6.3V 470u/6.3V 470u/6.3V 10u/16V 10u/16V 470u/6.3V 10u/16V 10u/16V 470u/6.3V 10u/16V
2.470V 1.640V 1.900V 2.440V 6.300V 6.330V 3.520V 6.330V 6.330V 1.900V 1.760V
C703 C710 C7A1 C7S1 C7S2 C7V1 C7V3 C7V6 C7V7 C7W1
470u/10V 4.7u/50V 47u/16V 220u/6.3V 10u/16V 47u/6.3V 1u/50V 4.7u/50V 1u/50V 10u/16V
4.900V 32.800V 5.130V 4.880V 4.880V 5.010V 3.280V 2.640V 5.010V 2.400V
C654 C672 C681 C682 C691 C693
220uF/6.3V 220uF/6.3V 47uF/6.3V 47uF/6.3V 47uF/6.3V 47uF/6.3V
3.25 3.25 5.01 1.79 3.31 5.22
1.830V .010V .980V 1.650V 1.300V 1.280V 1.910V .000V .000V .050V .010V
2.430V 1.970V 1.730V 2.430V 6.230V 6.250V 2.060V .624V 6.240V 2.060V 1.770V
.010V .010V .880V 1.620V .220V .790V .440V .370V .380V .010V .000V
PART : TUNER & VPS .000V .100V .000V .010V .000V .000V 1.460V .000V .000V .780V
4.890V 32.400V 5.090V 4.870V 4.870V 5.010V 3.270V 2.630V 4.990V 2.390V
.000V .010V .000V 1.330V .000V .000V 1.450V .000V .000V .780V
3.25 3.25 5.01 1.79 3.31 5.22
0.01V 0.01V 0.01V 0.01V 0.01V 0.01V
PART : HDMI 0.01V 0.01V 0.01V 0.01V 0.01V 0.01V
CE REC LOCA. NO.
SPEC
C103 C109 C123 C133 C122 C124 C126 C127 C128 C132 C134 C137 C152 C154 C155 C156
100u/450 33u/35 2200u/16 1000u/10 1000u/25 1000u/25 47u/50 2200u/16 2200u/16 470u/25 470u/25 1000u/10 100u/16 100u/16 100u/16 100u/16
(-)>(+)
C958
P/OFF
VOLTAGE(+) VOLTAGE(-) VOLTAGE(+) VOLTAGE(-)
PART : POWER
<- 220u
PART : JACK C901 C902 C904 C905 C907 C908 C919 C928 C929 C930 C938 C940 C946 C959
POWER ON PB VOLTAGE(+) VOLTAGE(-) VOLTAGE(+) VOLTAGE(-) REMARKS
LOCA. NO.
320.00 17.70 5.30 5.27 14.10 13.10 32.70 3.83 5.38 14.10 13.10 3.81 3.29 2.52 11.90 5.02
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
324.00 15.60 5.31 5.31 16.50 14.10 36.60 5.38 6.78 16.50 14.10 5.39 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
REMARKS
PRINTED CIRCUIT DIAGRAMS 1. VCR P.C.BOARD (TOP VIEW)
3-60
3-61
VCR P.C.BOARD (BOTTOM VIEW)
3-62
3-63
2. SMPS P.C.BOARD (TOP VIEW)
(BOTTOM VIEW)
3-64
3-65
3. KEY P.C.BOARD (7 TOOL) (BOTTOM VIEW)
(TOP VIEW)
(8, 9 TOOL) (TOP VIEW)
(BOTTOM VIEW)
3-66
3-67
MEMO
MEMO
3-68
3-69
VDR PART VDR ELECTRICAL TROUBLESHOOTING GUIDE 1. NO COMPONENT VIDEO SIGNAL WHEN PLAYING DISC Component : No Y Signal
Component : No Pb Signal
Component : No Pr Signal
YES
YES
YES
R905
YES
YES
R904
R903
Check the YES Comp-mute “H” signal. (Q909, Q913, Q914) NO
NO
IC901 - Pin19 Check input
NO
YES
NO
Check the PVM01 Pin10
NO
YES
IC901 Pin21 Check input NO
YES
IC901 Pin22 Check input
Replace Q909, Q913, Q914
YES
IC901 Pins24, 25, 26. signal check. YES
NO
Check the PVM01 Pin9
YES
Check the PVM01 Pin5
YES
Check Connection of the Connector (PVM01)
YES
Check the PVM01 Pin9. L1313 Check Signal in DVD Board NO
Check IC1101 Power and Other Circuits
3-70
YES
Repalce PMV01, PVM01
VDR ELECTRICAL TROUBLESHOOTING GUIDE 2. NO COMPOSITE/S-VIDEO SIGNAL WHEN PLAYING DISC COMPOSITE : No Signal YES
R911
YES
YES
YES
IC901 Pin15 Check input
YES
NO
C938
YES
C940
NO
L1306 : Check Signal
L1304, L1305 : Check Signal
NO
Check IC1101 Power and Other Circuits
YES
IC901 Pin17 Check input
NO
Check Connection of the PMV01, PVM01
YES
YES
NO
NO
IC901 Replace
S-VIDEO : No C Signal
L913
NO
IC901 Pins36, 39 No Signal
S-VIDEO : No Y Signal
NO
Check IC1101 Power and Other Circuits
3-71
LP12
NO
YES
IC901 Pin13 Check input
NO
C939
NO
IC901 Pins29(C), 27(Y). Signal Check
NO
IC901 Replace
YES
VDR ELECTRICAL TROUBLESHOOTING GUIDE 3. NO TV, EXTERNAL INPUT VIDEO SIGNAL No : TV signal
No : AV1 signal
YES
No : AV2 signal
YES
TU701 Pins1-19 Check signal And circuit
YES NO
IC901 Pin1
YES
YES
Check Sihnal 2C901 Pin7(Input), Pin42(Output)
AV3
IC901 Pin4
YES NO
IC301 Pin17
YES
IC901 Pin42 Check output
YES
YES
IC301 Pin15 (Input) YES
IC301 Pin29 Check (Output) YES Q310 Collector Sgnal, Power 12V YES Check Signal of the IC401 Pin29
NO
IC401 Pin51 : HIGH/ RST_VDEC
NO
YES Check the I2C Signal(SDA/ SCL) of the 2C401 Pins44, 45
NO
Check IC1101 (Power and other Circuits)
YES YES
Check IC401 Pin72 (VI_CLK)
NO
Check X401 Clock Oscillated.
NO
Check IC401 Power and other Circuits.
YES Check IC401 Pins57, 58,... (VI_D0~VI_D7) YES <When playing DISC, no COMPONENT, COMPOSIT/S-VIDEO Signal> Check
3-72
NO
Replace X1501 X-TAL
VDR ELECTRICAL TROUBLESHOOTING GUIDE 4. WHEN PLAYING DISC, NO AUDIO OUTPUT (IN VCR BOARD) When playing disc, no audio output (In vcr board)
IC402 Pins14, 15 (Audio_ out R/L) : Is there a Signal?
Check IC402 Pins2~4 (SPI) : Pins5~8(I2S) : Pin10(reset) : Pin7, 8(I2C):
NO
YES YES Check Q403, Q404, Q901~904 Q906, Q907, Q911, Q912
NO
IC402 Pins1, 16(Z_mute “H): IC501 Pin58(A_mute “H”): IC501 Pin56 (D_mute ‘H):
Check IC402 Pin11 (Vcc) YES
YES
IC901 Pins37, 38 : Is there a Signal?
Replace IC402
Check IC901 Pins11, 12 Check IC901 Power and Other Circuit.
NO
YES L905, L906 : Is there a Signal? YES Check Cable connection & TV Audio mute
Check IC1101 Pins131, 132, 135, 136 Pin131 --> R1111(AO_DO) : Pin132 --> R1112(AO_MCLK) : Pin135 --> R1113(AO_SCLK) : Pin136 --> R1114 (AO_FSYNC):
NO
IC1101 DEFECT
YES Check (PMV01, PVM01) Pins8, 9, 10, 11
3-73
NO
Replace PMV01, PVM01
NO
VDR ELECTRICAL TROUBLESHOOTING GUIDE 5. NO OPTICAL/DIGITAL OUTPUT No Optical/Digital Output
R1110 :
NO
Check IC1101 Power and Other Circuit
NO
Check PCB Pattern between PVM01 Pin19 and R923
YES
Check PMV01 Pin19 (IEE958)
Check R923 : YES
Check Vcc(T5.0V) of the JK902
Check L920 :
YES
Check JK902 & JK901 Cable Connection
3-74
NO
IC1101 DEFECT
VDR ELECTRICAL TROUBLESHOOTING GUIDE 6. NO BOOTING (DISPLAY “HELLOW” ON THE WINDOW) No Booting (Display “HELLOW” on the Window) YES Check Powers on DVD Board L1104 --> +1.25V L1110 --> +3.3V L1116 --> +2.5V L1119 --> +5V
NO
Check SMPS’s Circuit and Connection (Connectors)
RECHECK
YES
Check IC1101 Pins39, 40, 42, 43 Pin39 --> SPI_CSO_A : Pin40 NO --> SPI_CLK_A : Pin42 --> SPI_ MISO_A :
Check X-tal X1101 : 24.576MHz
NO
Replace X-tal
YES YES Check IC1201 Pin45, 46 Is SDRAM_CLK about 160MHz? YES Check IC1101 Pins152, 155 (I2C(SCL/SDA) Signal) IC1101 Pins158~161, 163(SPI_B_Part)
NO
Check IC1101 Pin50 : ES_RST “H”?
Check IC1400 Pin8 Is there “H”?
YES
Check PCB’s Pattern between IC1400 Pin8 and IC1101 Pin50
NO
YES Check IC1201 Pin45, 46 YES SDRAM_CLK : About 160MHz --> YES About 80MHz --> No NO
YES
Check IC1400 Pins9, 10. Is there “H”? NO Check PVM01 Pin27 Is there “H”?
YES
Check YES IC1400 Pin14 : +3.3V NO Check Power Circuit : +3.3V
YES
YES
Check Loder(RS-02) (Try to Change the Other Loader)
NO
NO
Replace IC1101 Check SPI_A_Part Signal IF Pin39 Signal OK and Pin40 Signal Ok and Pin42 Signal NG.
Check IC501 Pin9 Is there “H”? (In VCR Board)
YES NO Replace IC1101
Check IC501’s Circuit (In VCR Board)
Replace IC1301
Change “LOADER”
3-75
Replace IC1400
Check PCB’s YES Pattern between IC501 Pin9 and PVM01 Pin27
WAVEFORMS 1. SYSTEM BLOCK
1 1 Frequency=24.576MHz
Main Clock
2 2 Frequency=160MHz Pins45, 46
DDR RAM Clock
3-76
3
DDR Bank Address
4 5 6 5 4 DDR RAS & CAS
Pin21 Pin22
Pin23
3 Pins26, 27
6
DDR Write Enable
3-77
4
5
Pin152
Pin155
IC1101
4
5
12C_SDA
12C_SCL
3-78
2. VIDEO BLOCK (COLOR BAR INPUT)
1 1
CVBS_OUT
2
2 3
4
Y_OUT
5 3
6 C_OUT
6
5
4
G/Y_OUT
R/PR_OUT 3-79
B/PR_OUT
BLOCK DIAGRAMS 1. VDR SET TOTAL BLOCK DIAGRAM
3-80
3-81
2. VDR MAIN H/W BLOCK DIAGRAM
3-82
3-83
3. POWER BLOCK DIAGRAM
3-84
3-85
4. AUDIO IN/OUT BLOCK DIAGRAM
3-86
3-87
5. VIDEO IN/OUT BLOCK DIAGRAM
VCR BOARD
SAA7138
DMN8604
L1306 L1304 L1305 L1301 L1302 L1303
3-88
3-89
6. DV1394, USB BLOCK DIAGRAM
3-90
3-91
CIRCUIT DIAGRAMS 1. MPEG (DMN8604) CIRCUIT DIAGRAM
3-92
3-93
2. DDR, FLASH & RESET CIRCUIT DIAGRAM
3-94
3-95
3. POWER, LOADER, B TO B CIRCUIT DIAGRAM
3-96
3-97
• CIRCUIT VOLTAGE CHART Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 5 2 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84
Description ATAPI_DATA[5] ATAPI_DATA[10] ATAPI_DATA[4] VDD_IO GND ATAPI_DATA[11] ATAPI_DATA[3] VDD_CORE ATAPI_DATA[12] ATAPI_DATA[2] VDD_IO GND ATAPI_DATA[13] ATAPI_DATA[1] GND ATAPI_DATA[14] ATAPI_DATA[0] ATAPI_DATA[15] VDD_IO GND ATAPI_DIORn VDD_CORE ATAPI_DIOWn ATAPI_DMAACKn ATAPI_INTRQ ATAPI_IORDY ATAPI_DMARQ ATAPI_DA[1] VDD_IO GND ATAPI_DA[0] ATAPI_DA[2] ATAPI_CSn[0] VDD_CORE ATAPI_CSn[1] SPI_CSAn[1] VDD_IO GND SPI_CSAn[0] SPI_CLK_A GND MISO_A MOSI_A IRRX GPIO_0 VDD_CORE VDD_IO GND GPIO_1 RSTn SDRAM_A[3] VDD_DRAM SDRAM_A[2] SDRAM_A[1] GND SDRAM_A[0] GND VDD_CORE SDRAM_A[10] VDD_DRAM SDRAM_BA[1] SDRAM_BA[0] GND SDRAM_RASn SDRAM_CASn VDD_DRAM SDRAM_WEN GND VDD_CORE SDRAM_DQ[0] VDD_DRAM SDRAM_DQ[1] GND SDRAM_DQ[2] SDRAM_DQ[3] VDD_DRAM SDRAM_DQS[0] GND SDRAM_DQM[0] SDRAM_DQ[4] VDD_DRAM SDRAM_DQ[5] GND SDRAM_DQ[6]
Type Voltage (play) Voltage (rec)
Pin
Description
PIN IC1101
85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170
SDRAM_DQ[7] VDD_CORE VDD_DRAM SDRAM_CLK SDRAM_CLKn GND SDRAM_DQ[8] VDD_DRAM SDRAM_DQ[9] GND SDRAM_DQ[10] SDRAM_DQ[11] VDD_DRAM SDRAM_DQS[1] GND SDRAM_DQM[1] SDRAM_DQ[12] VDD_CORE SDRAM_DQ[13] GND SDRAM_DQ[14] SDRAM_DQ[15] VDD_DRAM GND VDD_CORE SDRAM_CKE SDRAM_A[12] GND SDRAM_A[11] SDRAM_A[9] VDD_DRAM SDRAM_A[8] GND SDRAM_A[7] GND VDD_CORE SDRAM_A[6] VDD_DRAM SDRAM_A[5] SDRAM_A[4] GND SDRAM_VREF AOUT_IEC958 AOUT_D[3] AOUT_D[2] AOUT_D[1] AOUT_D[0] AOUT_MCLKI VDD_IO GND AOUT_SCLK AOUT_FSYNC A2_FSYNC A2_SCLK VDD_CORE A2IN_D AIN_MCLKI VDD_IO GND AIN_D[0] AIN_SCLK AIN_FSYNC IRTX1 UART1_RX UART1_TX UART2_RX UART2_TX SDA GND VDD_CORE SCL VDD_IO GND SPI_CSBn[4] SPI_CSBn[5] SPI_CLK_B MOSI_B VDD_CORE MISO_B VO_CLK VO_D[0] VO_D[1] VO_D[2] VDD_IO GND VO_D[3]
I/O I/O I/O VDD GND I/O I/O VDD I/O I/O VDD GND I/O I/O GND I/O I/O I/O VDD GND Out VDD Out I/O In In In I/O VDD GND I/O I/O I/O VDD I/O I/O VDD GND I/O I/O GND In Out I/O I/O VDD VDD GND I/O In Out VDD Out Out GND Out GND VDD Out VDD Out Out GND Out Out VDD Out GND VDD I/O VDD I/O GND I/O I/O VDD I/O GND Out I/O VDD I/O GND I/O
3.3Vpp 3.3Vpp 3.3Vpp 3.3Vdc 0Vdc 3.3Vpp 3.3Vpp 1.25Vdc 3.3Vpp 3.3Vpp 3.3Vdc 0Vdc 3.3Vpp 3.3Vpp 0Vdc 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vdc 0Vdc 3.3Vpp 1.25Vdc 3.3Vdc 3.3Vpp 0Vdc 4.8Vdc 3.3Vpp 0Vdc 3.3Vdc 0Vdc 0Vdc 0Vdc 3.3Vdc 1.25Vdc 3.3Vdc 3.3Vdc 3.3Vdc 0Vdc 3.3Vdc 0Vdc 0Vdc 0Vdc 0Vdc 1.25Vdc 68mVdc 1.25Vdc 3.3Vdc 0Vdc 0Vdc 3.3Vdc 2.4Vpp 2.5Vdc 2.4Vpp 2.4Vpp 0Vdc 2.4Vpp 0Vdc 1.25Vdc 2.4Vpp 2.5Vdc 2.4Vpp 2.4Vpp 0Vdc 2.4Vpp 2.4Vpp 2.5Vdc 2.4Vpp 0Vdc 1.25Vdc 2.4Vpp 2.5Vdc 2.4Vpp 0Vdc 2.4Vpp 2.4Vpp 2.5Vdc 2.4Vpp 0Vdc 2.4Vpp 2.4Vpp 2.5Vdc 2.4Vpp 0Vdc 2.4Vpp
3.3Vpp 3.3Vpp 3.3Vpp 3.3Vdc 3.3Vpp 3.3Vpp 1.25Vdc 3.3Vpp 3.3Vpp 3.3Vdc 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vdc 3.3Vpp 1.25Vdc 3.3Vpp 3.3Vpp 0Vdc 4.8Vdc 3.3Vpp 0Vdc 3.3Vdc 0Vdc 0Vdc 0Vdc 3.3Vdc 1.25Vdc 3.3Vdc 3.3Vdc 3.3Vdc 0Vdc 3.3Vdc 0Vdc 0Vdc 0Vdc 0Vdc 1.25Vdc 68mVdc 1.25Vdc 3.3Vdc 0Vdc 0Vdc 3.3Vdc 2.4Vpp 2.5Vdc 2.4Vpp 2.4Vpp 0Vdc 2.4Vpp 0Vdc 1.25Vdc 2.4Vpp 2.5Vdc 2.4Vpp 2.4Vpp 0Vdc 2.4pp 2.4Vpp 2.5Vdc 2.4Vpp 0Vdc 1.25Vdc 2.4Vpp 2.5Vdc 2.4Vpp 0Vdc 2.4Vpp 2.4Vpp 2.5Vdc 2.4Vpp 0Vdc 2.4Vpp 2.4Vpp 2.5Vdc 2.4Vpp 0Vdc 2.4Vpp
Type Voltage (play) Voltage (rec)
Pin
I/O VDD VDD Out Out GND I/O VDD I/O GND I/O I/O VDD I/O GND Out I/O VDD I/O GND I/O I/O VDD GND VDD Out Out GND Out Out VDD Out GND Out GND VDD Out VDD Out Out GND In Out I/O I/O I/O I/O In VDD GND Out Out I/O I/O VDD In I/O VDD GND In I/O I/O I/O I/O I/O I/O I/O I/O GND VDD I/O VDD GND I/O I/O I/O Out VDD In I/O I/O I/O I/O VDD GND I/O
171 VO_D[4] 172 VO_D[5] 173 VO_D[6] 174 VO_D[7] 175 VI_D[2] 176 VI_D[3] 177 VI_D[4] 178 VI_D[5] 179 VI_D[6] 180 GND 181 VDD_CORE 182 VDD_IO 183 GND 184 VI_D[7] 185 VI_D[8] 186 VI_D[9] 187 VI_CLK[0] 188 TCK 189 TMS 190 TDI 191 TDO 192 TRSTn 193 AGND_BATT 194 RTCCLKI 195 RTCCLKX 196 AVDD_BATT 197 Y/GREEN 198 AVDD_DACD 199 Pb/BLUE 200 AVDD_DAC 201 Pr/RED 202 AVDD_DAC 203 CVBS 204 AGND_DAC 205 C 206 AGND_DAC 207 Y 208 AVDD_VREF 209 RREF 210 AGND_VREF 211 VDD_CORE 212 AVDD_APLLOUT 213 AGND_APLLOUT 214 AVDD_VIDPLL 215 AGND_VIDPLL 216 AGND_SYSPLL 217 AVDD_SYSPLL 218 AGND_APLLIN 219 AVDD_APLLIN 220 AVDD_OSC 221 CLKX 222 CLKI 223 AGND_OSC 224 AGND_PLL 225 AVDD_PLL 226 1394_TPBN0 227 1394_TPB0 228 AVDD33_XCVR 229 AGND_XCVR 230 1394_TPAN0 231 1394_TPA0 232 1394_TPBIAS0 233 AGND1394_XCVR 234 AVDD1394_XCVR 235 VDD_CORE 236 AVDD_USB0 237 USB_DPLUS0 238 USB_DMINUS0 239 AGND_USB0 240 AGND_USB1 241 USB_DMINUS1 242 USB_DPLUS1 243 AVDD_USB1 244 USB_OC_0 245 USB_PO_0 246 BIAS_5V 247 ATAPI_RESET 248 GND 249 VDD_CORE 250 VDD_IO 251 GND 252 ATAPI_DATA[7] 253 ATAPI_DATA[8] 254 ATAPI_DATA[6] 255 ATAPI_DATA[9] 256 N/C
2.4Vpp 1.25Vdc 2.5Vdc 2.4Vpp 2.4Vpp 0Vdc 2.4Vpp 2.5Vdc 2.4Vpp 0Vdc 2.4Vpp 2.4Vpp 2.5Vdc 2.4Vpp 0Vdc 2.4Vpp 2.4Vpp 1.25Vdc 2.4Vpp 0Vdc 2.4Vpp 2.4Vpp 2.5Vdc 0Vdc 1.25Vdc 2.4Vdc 2.4Vpp 0Vdc 2.4Vpp 2.4Vpp 2.5Vdc 2.4Vpp 0Vdc 2.4Vpp 0Vdc 1.25Vdc 2.4Vpp 2.5Vdc 2.4Vpp 2.4Vpp 0Vdc 1.25Vdc 3Vpp 0Vdc 0Vdc 0Vdc 3.3Vpp 3.1Vpp 3.3Vdc 0Vdc 3.6Vpp 3.3Vpp 3.3Vdc 0Vdc 1.25Vdc 0Vdc 3.1Vpp 3.3Vdc 0Vdc 3.3Vpp 3.6Vpp 3.3Vpp 3.3Vdc 3.3Vdc 3.3Vdc 3.3Vdc 3.3Vdc 3.3Vpp 0Vdc 1.25Vdc 3.3Vpp 3.3Vdc 0Vdc 3.3Vpp 3.3Vdc 3.3Vpp 3.3Vpp 1.25Vdc 5Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vdc 0Vdc 3.3Vpp
2.4Vpp 1.25Vdc 2.5Vdc 2.4Vpp 2.4Vpp 0Vdc 2.4Vpp 2.5Vdc 2.4Vpp 0Vdc 2.4Vpp 2.4Vpp 2.5Vdc 2.4Vpp 0Vdc 2.4Vpp 2.4Vpp 1.25Vdc 2.4Vpp 0Vdc 2.4Vpp 2.4Vpp 2.5Vdc 0Vdc 1.25Vdc 2.4Vdc 2.4Vpp 0Vdc 2.4Vpp 2.4Vpp 2.5Vdc 2.4Vpp 0Vdc 2.4Vpp 0Vdc 1.25Vdc 2.4Vpp 2.5Vdc 2.4Vpp 2.4Vpp 0Vdc 1.25Vdc 3Vpp 0Vdc 0Vdc 0Vdc 3.3Vpp 3.1Vpp 3.3Vdc 0Vdc 3.6Vpp 3.3Vpp 3.3Vdc 0Vdc 1.25Vdc 0Vdc 3.1Vpp 3.3Vdc 0Vdc 3.3Vpp 3.6Vpp 3.3Vpp 3.3Vdc 3.3Vdc 3.3Vdc 3.3Vdc 3.3Vdc 3.3Vpp 0Vdc 1.25Vdc 3.3Vpp 3.3Vdc 0Vdc 3.3Vpp 3.3Vdc 3.3Vpp 3.3Vpp 1.25Vdc 5Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vdc 0Vdc 3.3Vpp
3-98
Description
Type Voltage (play) Voltage (rec) I/O I/O I/O I/O In In In In In GND VDD VDD GND In In In In In In In Out In GND I/O I/O VDD Out VDD Out VDD Out VDD Out GND Out GND Out VDD Out GND VDD VDD GND VDD GND GND VDD GND VDD VDD In In GND GND VDD I/O I/O VDD GND I/O I/O I/O GND VDD VDD VDD I/O I/O GND GND I/O I/O VDD In Out VDD Out GND VDD VDD GND I/O I/O I/O I/O
3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 0Vdc 1.25Vdc 3.3Vdc 0Vdc 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vdc 3.3Vdc 3.3Vdc 0Vdc 0Vdc 0Vdc 0Vdc 0Vdc 0Vdc 1Vpp 3.3Vdc 0.5Vpp 3.3Vdc 0.5Vpp 3.3Vdc 1Vpp 0Vdc 0.7Vpp 0Vdc 1Vpp 3.3Vdc 1.2Vdc 0Vdc 1.25Vdc 1.25Vdc 0Vdc 1.25Vdc 0Vdc 0Vdc 1.25Vdc 0Vdc 1.25Vdc 3.3Vpp 3.8Vpp 1.3Vpp 0Vdc 0Vdc 1.25Vdc 0Vdc 0Vdc 3.3Vdc 0Vdc 3Vdc 3Vdc 3Vdc 0Vdc 1.25Vdc 1.25Vdc 3.3Vdc 0Vdc 0Vdc 0Vdc 0Vdc 0Vdc 0Vdc 3.3Vdc 0Vdc 0Vdc 5Vdc 3.3Vdc 0Vdc 1.25Vdc 3.3Vdc 0Vdc 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 0Vdc
3-99
3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 0Vdc 1.25Vdc 3.3Vdc 0Vdc 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vdc 3.3Vdc 3.3Vdc 0Vdc 0Vdc 0Vdc 0Vdc 0Vdc 0Vdc 1Vpp 3.3Vdc 0.5Vpp 3.3Vdc 0.5Vpp 3.3Vdc 1Vpp 0Vdc 0.7Vpp 0Vdc 1Vpp 3.3Vdc 1.2Vdc 0Vdc 1.25Vdc 1.25Vdc 0Vdc 1.25Vdc 0Vdc 0Vdc 1.25Vdc 0Vdc 1.25Vdc 3.3Vpp 3.8Vpp 1.3Vpp 0Vdc 0Vdc 1.25Vdc 0Vdc 0Vdc 3.3Vdc 0Vdc 3Vdc 3Vdc 3Vdc 0Vdc 1.25Vdc 1.25Vdc 3.3Vdc 0Vdc 0Vdc 0Vdc 0Vdc 0Vdc 0Vdc 3.3Vdc 0Vdc 0Vdc 5Vdc 3.3Vdc 0Vdc 1.25Vdc 3.3Vdc 0Vdc 3.3Vpp 3.3Vpp 3.3Vpp 3.3Vpp 0Vdc
PART : DVD POWER ON LOCA. NO.
SPEC
C1122
10uF/16V 20% 3216
3.240V
C1135
22uF/10V 20% 3216
1.270V
C1152
22uF/10V 20% 3216
C1201
VOLTAGE(+)
VOLTAGE(-)
PB VOLTAGE(+)
VOLTAGE(-)
.000V
3.240V
.000V
.000V
1.270V
.000V
2.470V
.000V
2.460V
.000V
10uF/16V 20% 3216
2.470V
.000V
2.460V
.000V
C1208
10uF/16V 20% 3216
2.470V
.000V
2.460V
.000V
C1217
220uF/6.3V 20%
1.230V
.000V
1.220V
.000V
C1168
220uF/6.3V 20%
1.270V
.000V
1.260V
.000V
C1169
220uF/6.3V 20%
1.260V
.000V
1.260V
.000V
C1174
330uF/6.3V 20%
1.260V
.000V
1.260V
.000V
.000V
Tantal Cap
AL Cap C1170
220uF/6.3V 20%
1.260V
.000V
1.260V
C1172
220uF/6.3V 20%
3.240V
.000V
3.240V
.000V
C1211
220uF/6.3V 20%
2.470V
.000V
2.460V
.000V
C1216
220uF/6.3V 20%
1.230V
.000V
1.220V
.000V
C1804
100uF/16V 20%
5.010V
.000V
5.000V
.000V
REMARKS
PRINTED CIRCUIT DIAGRAMS 1. VDR P.C.BOARD (TOP VIEW)
3-100
3-101
VDR P.C.BOARD (BOTTOM VIEW)
3-102
3-103
SECTION 4 MECHANISM OF VCR PART(D-37) CONTENTS DECK MECHANISM PARTS LOCATIONS • Top View......................................................4-1 • Bottom View ...............................................4-1
DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM 01.Disassembly of Drum assembly ................4-2 02.Disassembly of Plate top disassembly..... 4-4 03.Holder Assembly CST ...............................4-4 04.Disassembly of Gear Assembly Rack F/L....................................................4-4 05.Opener Door .............................................4-4 06.Arm Assembly F/L .....................................4-4 07.Lever Assembly S/W .................................4-4 08.Motor Assembly L/D ..................................4-5 09.Gear Wheel ...............................................4-5 10.Arm Assembly Cleaner..............................4-5 11. Head F/E ...................................................4-5 12.Base Assembly A/C Head .........................4-5 13.Brake Assembly T .....................................4-6 14.Arm Assembly Tension..............................4-6 15.Reel S / Reel T..........................................4-6 16.Base Assembly P4 ....................................4-7 17.Opener Lid ................................................4-7 18.Arm Assembly Pinch .................................4-7 19.Arm T/up ...................................................4-7 20.Supporter, Capstan ...................................4-8 21.Belt Capstan/Motor Capstan .....................4-8 22.Lever F/R ..................................................4-8 23.Clutch Assembly D37 ................................4-8 24.Gear Drive/Gear Cam ...............................4-9 25.Gear Sector...............................................4-9 26.Brake Assembly Capstan ..........................4-9 27.Plate Slider................................................4-9 28.Lever Tension ............................................4-9 29.Lever Spring..............................................4-9 30. Lever Brake..............................................4-9 31.Gear Assembly P2/Gear Assembly P3 ...4-10 32.Base Assembly P2/Base Assembly P3 ...4-10 33.Base Loading ..........................................4-10 34.Base Tension ...........................................4-11 35.Arm Assembly Idler Jog ..........................4-11
DECK MECHANISM ADJUSTMENT • Fixtures and tools for service ................4-12 1. Mechanism Assembly Mode Check ........4-13 2. Previous Preparation for Deck Adjustment .....................................4-14 3. Torque Measuring ...................................4-14 4. Guide Roller Height Adjustment..............4-15 4-1. Prior Adjustment...............................4-15 4-2. Fine Adjustment ...............................4-15 5. Audio/Control (A/C) Head Adjustment......4-16 5-1. Prior Adjustment...............................4-16 5-2. Tape Path Check between Pinch Roller and Take-up Guide ................4-17 5-3. Fine Adjustment (Azimuth Adjustment).......................4-17 6. X-distance Adjustment ............................4-17 7. Adjustment after Drum Assembly (Video Heads) .........................................4-18 8. Tachometer Adjustment of Deck Assembly........................................4-18 8-1. Check of Audio, RF Normalization Time (Locking Time) in Play after CUE or REV.....................................4-18 8-2. Check of Tape Curl and Jam Status .......................................4-18
PROTECTION, MAINTENANCE AND CHECK OF VIDEO FUNCTION 1. 2. 3. 4. 5.
Checking Points before Repair ...............4-19 Essential Check and Repair....................4-20 Regular Check and Repair......................4-20 Tools for Check and Repair.....................4-20 Maintenance Process..............................4-20 5-1. Removal of Foreign Materials..........4-20 5-2. Grease Application...........................4-21
TROUBLESHOOTING GUIDE 1. Deck Mechanism.....................................4-23 2. Front Loading Mechanism.......................4-26
EXPLODED VIEWS 1. Front Loading Mechanism Section...........4-28 2. Moving Mechanism Section(1) .................4-29 3. Moving Mechanism Section(2) .................4-30
DECK MECHANISM PARTS LOCATIONS • Top View Procedure Part
Starting No.
9
2 2,3 2,3,4 2,3,4,5 4
2
3 6
5 10 8 12
11
18
1
16
33
17 19
14
2,3 2,3 2,3,13,14
17 17
15
17,18 13 35
7
21, 22
15
• Bottom View 20 32
21
31 31
24
32 21
25
24
34 28
23 27 22
29 30
26
21 21,22,23, 24,2526 21,22,23, 24,2526,27 21,22,23, 24,2526,27 21,22,23, 24,2526,27 25 2, 3, 14, 25, 31 25, 31 2,3,14
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
Drum Assembly Plate Top Holder Assembly CST Gear Assembly Rack F/L Opener Door Arm Assembly F/L Lever Assembly S/W
3 screws 2 hooks 6 chasses 1 hook Chassis Hole Chassis Hole Chassis Hole, 1 hook Motor Assembly L/D 1 screw Gear Wheel 2 hooks Arm Assembly Cleaner Chassis Embossing Head F/E Chassis Embossing Base Assembly A/C Head 1 screw Brake Assembly T 1 hook Arm Assembly Tension 1 hook Reel S / Reel T Shaft Base Assembly P4 Chassis Embossing Opener Lid Chassis Embossing Arm Assembly Pinch Shaft Arm T/up 1 hook Supporter, capstan Chassis Hole Belt Capstan/Motor Capstan 3 screws Lever F/R Locking Tab Clutch Assembly D37 Washer Gear Drive/Gear Cam Washer/Hook Gear Sector Hook Brake Assembly Capstan Chassis Hole Plate Slider Chassis Guide
(1) When reassembling, confirm Mechanism and Mode Switch Alignment Position (2) When disassembling, the Parts in the "Starting No." column should be removed first."
4-1
Ref. Posi Draw- tion ings
A-1 A-2 A-2 A-2 A-2 A-2 A-2
T T T T T T T
A-3 A-3 A-3 A-3 A-3 A-4 A-4 A-4 A-5 A-5 A-5 A-5 A-6 A-6 A-6 A-6 A-7 A-7 A-7 A-7
T T T T T T T T T T T T B B B B B B B B
28 Lever Tension
1 Hook
A7
B
29 Lever Spring
1 Hook
A-7
B
30 Lever Brake
1 Hook
A-7
B
31 Gear Assembly P2/ Gear Assembly P3 32 Base Assembly P2 /Base Assembly P3 33 Base Loading 34 Base Tension 35 Arm Assembly Idler Jog
Bass
A-8
B
6 Chasses
A-8
B
3 Hooks Chassis Embossing Locking Tab
A-8 A-9 A-9
B T T
T:Top, B:Bottom
NOTE : When reassembling, perform the procedure in the reverse order.
Fixing Type
DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM
Drum Assembly
Flat Cable
(S1) (S1)
(S1) Cap, FPC H2
H1
Holder FPC
Fig. A-1 1. Disassembly of Drum Assembly (Figure A-1)
Cautions in assembly of FPC
1) Separate the flat cable from the Drum FPC and the Capstan Motor. 2) Release 3 screws (S1) on the bottom side of the chassis, and separate the drum assembly. 3) Release the hooks (H1, H2) and separate both the holder FPC and the Cap FPC (disassemble if necessary).
Cap FPC
Drum FPC Holder FPC
Assembly shape seen in the reverse direction
4-2
DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM
Plate Top
(Fig. A-2-1)
(B')
(C)
(B)
Holder Assembly CST
(Fig. A-2-2) (E) Arm Assembly F/L
(Fig. A-2-5)
Lever Assembly S/W
(Fig. A-2-6) (H4)
(E)
Opener Door
(Fig. A-2-4)
(H3)
Gear Assembly Rack F/L
(Fig. A-2-3)
Fig. A-2 4-3
(A)
(B)
DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM 2. Disassembly of Plate Top (Fig. A-2-1) 1) Separate the right part while leaning back the (B) part of the plate top toward the arrow direction. 2) Separate the left part while leaning back the (B’) part of the plate top toward the arrow direction. (Tool used: Tool such as (-) driver, auger, etc with pointed or flat end)
4. Disassembly of Gear Assembly Rack F/L (Fig. A-2-3) 1) Separate the hook (H3) while leaning ahead the hook (3) after moving the gear assembly rack F/L toward the arrow (A) direction. 2) Separate the gear assembly rack F/L toward the arrow (B) direction.
CAUTIONS
CAUTIONS Assemble while pressing the (C), (C’) part after corresponding them as in drawing.
For the assembly, correspond the gear part of gear assembly rack F/L to the gear drive. Gear Rack F/L
(C') (C) (B')
(B)
Gear Drive
5. Opener Door (Fig. A-2-4) 3. Holder Assembly CST (Fig. A-2-2) 1) Firstly separate the left part from the groove on the (D) part of chassis while moving the holder assembly CST toward the arrow direction. Holder Assembly CST
Chassis
(D)
1) Separate the opener door ahead from the guide hole of chassis while turning it clockwise.
6. Arm Assembly F/L (Fig. A-2-5) 1) Firstly separate the left part of the arm assembly F/L from the groove of chassis while pushing the arm assembly F/L toward the arrow direction. 2) Separate the right part from the groove of chassis.).
7. Lever Assembly S/W (Fig. A-2-6) 1) Separate the lever assembly S/W while pushing it toward the arrow direction after removing the hook (4) on the left side of chassis. Chassis
2) Separate the right part from each groove of chassis
CAUTIONS (H4)
Assemble by inserting the left part after firstly inserting the (E) part of the holder assembly CST into the groove on the (E’) part of chassis.
4-4
DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM
Arm Assembly Cleaner
(Fig. A-3-3) (A) (H5) Gear Wheel
(Fig. A-3-2) Base Assembly A/C Head
Motor Assembly L/D
(S5)
(Fig. A-3-5)
(Fig. A-3-1)
(A)
Head F/E
(C1)
(Fig. A-3-4)
(S4)
Fig. A-3 8. Motor Assembly L/D (Fig. A-3-1)
10. Arm Assembly Cleaner (Fig. A-3-3)
1) Take the connector (C1) connected to the Capstan motor PCB out. 2) Remove a screw (S4) of the chassis (S4) and step backward, and disassemble it while holding it up.
1) Separate the (A) part of Fig. A-3-1 from the embossing of chassis, and hold it up while turning it anti-clockwise.
9. Gear Wheel (Fig. A-3-2) 1) Release the hook (H5) of the gear wheel and disassemble it upward.
11. Head F/E (Fig. A-3-4) 1) Separate the (A) part of the head F/E from the embossing of chassis, and hold it up while turning it anti-clockwise.
12. Base Assembly A/C Head (Fig. A-3-5) 1) Release a screw (S5) and disassemble while holding it up.
4-5
DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM
Arm Assembly Tension
(Fig. A-4-2) (H7)
Reel T
(Fig. A-4-3) Reel S
(Fig. A-4-3)
Spring Tension
Brake Assembly T
Spring Tension
(Fig. A-4-1)
(H8)
(H6)
Fig. A-4 13. Brake Assembly T (Fig. A-4-1) 1) Release the spring tension from the lever spring hook (H6). 2) Disassemble the brake assembly T while holding it upward.
15. Reel S/Reel T (Fig. A-4-3) 1) Disassemble the reel S/ reel T while holding it up (comparison between Reel S and Reel T)
14. Arm Assembly Tension (Fig. A-4-2) 1) Release the spring tension the hook (H7) from the arm assembly tension. 2) After releasing the hook (H8) of the base tension, separate it while holding it up.
Reel S
Reel T
CAUTIONS Spring used for both brake assembly T and arm assembly tension is used (2EA used).
4-6
DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM Opener Lid
(Fig. A-5-2)
(B) Arm Assembly Pinch
(Fig. A-5-3) (C)
Base Assembly P4
(C)
(Fig. A-5-1) (H9)
Arm T/up
(A)
(Fig. A-5-4) Chassis
Fig. A-5 16. Base Assembly P4 (Fig. A-5-1)
18. Arm Assembly Pinch (Fig. A-5-3)
1) Release the (A) part of the base assembly P4 from the embossing of chassis. 2) Hold the base assembly P4 up while turning it anti-clockwise.
1) Hold the arm assembly pinch up.
17. Opener Lid (Fig. A-5-2) 1) Release the (B) part of the opener lid from the embossing of chassis. 2) Disassemble the opener lid upward while turning it anticlockwise.
19. Arm T/up (Fig. A-5-4) 1) Turn the arm T/up to release the anchor jaw (H9) part of chassis and then hold it upward.
CAUTIONS For the assembly, check the (C) part of the arm assembly pinch is assembled as in drawing. - REVERSE THE MECHANISM.
4-7
DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM
Suppoter Capstan
(Fig. A-6-1) Belt Capstan
(Fig. A-6-2)
Motor Capstan
(Fig. A-6-3) Washer(W1)
Clutch Assembly D37
(Fig. A-6-5)
(L1)
(L1)
Lever F/R
(Fig. A-6-4)
Chassis
(S6)
Fig. A-6 20. Supporter, Capstan (Fig. A-6-1)
22. Lever F/R (Fig. A-6-4)
1) Turn the supporter and Capstan by 90 deg. clockwise with a driver for disassembly.
1) Release the locking tab (L1) and then disassemble it upward.
21. Belt Capstan (Fig. A-6-2) / Motor Capstan (Fig. A-6-3)
23. Clutch Assembly D37 (Fig. A-6-5)
1) Separate the belt Capstan. 2) Undo 3 screws (S6) on the bottom side of chassis and disassemble it upward.
1) Remove the washer (W1) and then disassemble it upward.
4-8
DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM
(H10)
(H11) Gear Sector
Gear Cam
(Fig. A-7-3)
(Fig. A-7-2) (W2)
Washer (W2) Brake Assembly Capstan
Gear Cam Hole(B) (L2)
Gear Drive
(Fig. A-7-4)
(Fig. A-7-1)
Gear Drive Hole(A)
Plate Slider
(Fig. A-7-5)
Lever Tension
(Fig. A-7-6) Lever Brack
(Fig. A-7-8)
(B)
Lever spring
(Fig. A-7-7) Base Loading
Gear Cam Hole(C)
(A)
Chassis
Fig. A-7 24. Gear Drive (Fig. A-7-1)/ Gear Cam (Fig. A-7-2)
1) Release the locking tab (L2) on the bottom side of the plate slider and then disassemble it upward.
1) Remove the washer (W2) and then disassemble the gear drive. 2) Release the hook (H10) of the gear cam and then disassemble it upward.
27. Plate Slider (Fig. A-7-5)
CAUTIONS For the assembly, adjust both the gear driver hole (A) and the gear cam hole (B) straightly and then correspond the gear cam hole (C) to the chassis hole.
25. Gear Sector (Fig. A-7-3) 1) Release the hook (H11) of the gear sector and then hold the gear sector upward.
26. Brake Assembly Capstan (Fig. A-7-4) 4-9
1) Disassemble the plate slider while holding it up.
28. Lever Tension (Fig. A-7-6) 1) Release the lever tension from the guide (A) of chassis while turning it anti-clockwise. 2) Disassemble the lever tension while holding it up.
29. Lever Spring (Fig. A-7-7) 1) Release the (B) part of the lever spring from the guide (A) of chassis while turning it anti-clockwise. 2) Disassemble the lever tension while holding it up.
30. Lever Brake (Fig. A-7-8) 1) Disassemble the lever brake while holding it up.
DECK MECHANISM DISASSEMBLY Gear assembly P2 Hole Gear assembly P3 Hole
Gear Assembly P3
(Fig. A-8-2)
Gear Assembly P2
(Fig. A-8-1) (H12)
(H13)
Lever Tension Boss Plate slider Hole(B) (H14)
Base Loading
(Fig. A-8-5)
(B) (A)
Chassis
Base Assembly P3
(Fig. A-8-4)
Base Assembly P2
(Fig. A-8-3)
Fig. A-8 31. Gear Assembly P2 (Fig. A-8-1)/ Gear Assembly P3 (Fig. A-8-2)
32. Base Assembly P2 (Fig. A-8-3)/ Base Assembly P3 (Fig. A-8-4)
1) Hold the gear assembly P2 upward. 2) Hold the gear assembly P3 upward.
1) Disassemble the base assembly P2 downward while moving it toward the arrow (A) direction along with the guide hole of chassis. 2) Disassemble the base assembly P2 downward while moving it toward the arrow (B) direction along with the guide hole of chassis.
CAUTIONS For the assembly, check the holes of both the gear assembly P2 and the P3 are adjusted straightly, and then correspond the gear section groove (A) to the plate slider hole (B).
33. Base Loading (Fig. A-8-5) 1) Release 3 hooks (H12, 13, 14) of the base loading, and then disassemble them upward. - Reverse the mechanism.
4-10
DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM
Base Tension
(Fig. A-9-1)
Arm Assembly Idler Jog
(A)
(Fig. A-9-2)
(B)
(C)
Chassis
(D)
Fig. A-9 34. Base Tension (Fig. A-9-1)
35. Arm assembly Idler Jog (Fig. A-9-2)
1) Release the (A) part of the base tension from the embossing of chassis. 2) Hold the base tension upward while turning it anti-clockwise.
1) Push both (B), (C) parts in Fig. A-9-2 toward the arrow direction. 2) Disassemble the arm assembly idler upward.
CAUTIONS Take care to ensure that the (D) part in the drawing is not hung to chassis in disassembly.
4-11
DECK MECHANISM ADJUSTMENT • Fixtures and Tools for Service
SR K
1. Cassette Torque Meter SRK-VHT-303(Not SVC part) Part No:D00-D006
-V
HT
-S
2. Alignment tape Part No NTSC:DTN-0001 PAL:DTN-0002
3. Torque gauge 600g.Cm ATG Part No:D00-D002
5. Post height adjusting driver Part No:DTL-0005
6. + Type driver (ø5)
300 250 200 150
SR
K
0 50
VID CAS EO S TOR ETTE Q MET UE VHT ER -303
-T K- V HT0 SR 50 100 150
200
300
250
4. Torque gauge adaptor Part No:D09-R001
4-12
DECK MECHANISM ADJUSTMENT 1. Mechanism Assembly Mode Check Purpose of adjustment : To make tools normally operate by positioning tools accurately. Fixtures and tools used • Blank Tape (empty tape)
VCR (VCP) status
Checking Position
• Eject Mode (with cassette withdrawn)
1) Turn the VCR on and take the tape out by pressing the eject button. 2) Separate both top cover and plate top, and check both the hole (A) of gear cam and the hole (A’) of chassis correspond (Fig. C-2). 3) If it is done as in the paragraph 2): Turn the gear cam as in No.2) after mantling the motor assembly L/D.
• Mechanism and Mode Switch
4) Undo the screw fixing the deck and the main frame, and separate the deck assembly. Check both the hole (A) of gear cam and the hole (A’) of chassis correspond (Fig. C-1). 5) Check the mode S/W on the main P.C. board locates at a proper position as in (B) of the Fig. (C-1). 6) Connect the deck to the main P.C. board and perform all types of test.
CHECK DIAGRAM Mode S/W
Gear Cam
(C)
(B)
Gear Drive
Correspondence of the gear cam hole (O) and the gear drive hole (O)
BOTTOM VIEW Fig. C-1
Motor Assembly L/D
Gear Cam (A') (A) Chassis Hole
TOP VIEW Fig. C-2 4-13
Gear Cam Hole
DECK MECHANISM ADJUSTMENT 2. Previous Preparation for Deck Adjustment (Preparation to load the VCR (VCP) with cassette tape not inserted) 1) Take the power cord from the consent. 2) Separate the top cover and the plate assembly top. 3) Insert the power cord into again. 4) Turn the VCR (VCP) on and load the cassette while pushing the lever stopper of the holder assembly CST backward. In this case, clog both holes on the housing rail part of chassis to prevent detection of the end sensor.
If doing so, proceeding to the stop mode is done. In this status, input signals of all modes can be received. However, operation of the Rewind and the Review is impossible since the take-up reel remains at stop status and so cannot detect the reel pulse (however, possible for several seconds).
3. Torque Measuring Purpose of Measuring : To measure and check the reel torque on the take-up part and the supply part that performs basic operation of the VCR (VCP) for smoothly forwarding the tape. Measure and check followings when the tape is not smoothly wound or the tape velocity is abnormally proceeded: Fixtures and tools used • Torque Gauge (600 g.cm ATG) • Torque Gauge Adaptor • Cassette Torque Meter SRK-VHT-303
Item
VCR (VCP) status • Play (FF) or Review (REW) Mode
Mode
Measuring method • Try to operate the VCR (VCP) per mode with the tape not inserted (See ‘2. Prior Preparation for Deck Adjustment). • Measure after adhering and fixing the torque gauge adaptor to the torque gauge (Fig. C-3-1) • Read scale of the supply or take-up part of the cassette torque meter (Fig. C-3-2).
Instruments
Reel Measured
Measuring Value
Fast forward Torque Fast Forward
Torque Gauge
Take-Up Reel
More than 400g°cm
Rewind Torque
Torque Gauge
Supply Reel
More than 400g°cm
Play Take-Up Torque Play
VHT-303
Take-Up Reel
40~100g°cm
Review Torque
VHT-303
Supply Reel
120~210g°cm
Rewind Review
NOTE Adhere the torque gauge adaptor to the torque gauge for measuring the value.
• Torque Gauge (600g.cm ATG)
• Cassette Torque Meter (SRK-VHT-303)
SR K
Torque Gauge -V
HT
-S
300 250 200 150
SR
K
Torque Gauge Adaptor
0 50
VID CAS EO S TOR ETTE Q MET UE VHT ER -303
-T K- V HT0 SR 50 100 150
200
300
250
Reel Table
Fig. C-3-1
Fig. C-3-2 4-14
DECK MECHANISM ADJUSTMENT 4. Guide Roller Height Adjustment Purpose of adjustment : To ensure that the bottom surface of the tape can travel along with the tape lead line of the lower drum by constantly and adjusting and maintaining the height of the tape. 4-1. Prior Adjustment Fixtures and tools used • Post Height Adjusting Driver
VCR (VCP) status • Play or Review Mode
Adjustment Procedure
Adjustment position • The guide roller height adjusting screw on the supply guide roller and the take-up guide roller ADJUSTMENT DIAGRAM
1) Travel the tape and check the bottom surface of the tape travels along with the guide line of the lower drum. 2) If the tape travels toward the lower part of guide line on the lower drum, turn the guide roller height adjusting screw to the left 3) If it travels to the upper part, turn it to the right. 4) Adjust the height of the guide roller to ensure that the tape is guided on the guide line of the lower drum at the inlet/outlet of the drum. (Fig. C-4-1)
GUIDE ROLLER HEIGHT ADJUSTMENT SCREW
Fig. C-4-1
4-2. Fine Adjustment Fixtures and tools used • Oscilloscope • Standard test tape • Post height adjusting driver
Measuring tools and connection position
VCR (VCP) status
• CH-1: PB RF Envelope • Play the standard test tape. • CH-2: NTSC : SW 30Hz PAL : SW 25Hz Waveform • Head switching output P2 POST ADJUSTMENT point • RF Envelope output point
1) Play the standard test tape after connecting the probe of oscilloscope to the RF envelope output point and the head switching output point. 2) Tracking control (playback) : Locate it at the center (Set the RF output to the maximum value via the tracking control when such adjustment is completed after the drum assembly is replaced.) 3) Height adjusting screw: Flatten the RF waveform. (Fig. C-4-2) 4) Move the tracking control (playback) to the right/left. (Fig. C-4-3) 5) Check the start and the end of the RF output reduction width are constant.
CAUTIONS
Adjustment position • Guide roller height adjusting screw
P3 POST ADJUSTMENT
Fig. C-4-2
When the tracking control locates at the center.
Flatten the waveform by lightly turning the guide roller height adjustment screw.
When turning the tracking control to both sides.
Fig. C-4-2 Connection Diagram
There must exist no crumpling and folding of the tape due to excess adjustment or insufficient adjustment.
OSCILLOSCOPE
RF ENVELOPE OUTPUT POINT CH-1
HEAD RF SWITCHING OUTPUT POINT
4-15
CH-2
DECK MECHANISM ADJUSTMENT 5. Audio/Control (A/C) Head Adjustment Purpose of adjustment : To ensure that audio and control signals can be recorded and played according to the contract tract by constantly maintaining distance between tape and head, and tape tension between the P3 post and the P4 post. 5-1. Prior Adjustment (performed only when no audio output appears in play of the standard test tape) Fixtures and tools used • Blank Tape (Empty Tape) • Driver (+) Type ø 5
VCR (VCP) status • Play the blank tape (empty tape).
Adjustment Procedure/Adjustment Diagrams 1) Basically use the A/C head assembly adjusted as in SPEC. 2) Check there is crumpling and folding of the tape around the A/C head. If it is, Turn and adjust the tilt adjusting screw to ensure that the tape corresponds to the bottom guide of the P4, and recheck the tape path after proceeding play for 4-5 seconds.
Adjustment position • Tilt adjusting screw (C) • Height adjusting screw (B) • Azimuth adjusting screw (A) 3) Where the tape bottom is not equal to Fig. C-5-3, Adjust the height by using the height adjusting screw (B) and then readjust it by using the tilt adjusting screw (C).
CAUTIONS Always check the height of the A/C head since most ideal height of A/C head can be obtained when the bottom part of the tape is away 0.2 ~ 0.25mm from the bottom part of the A/C head.
Tape
A/C Head
8.3
P4 Tape 0.2~0.25mm
A/C Head Base Fig. C-5-1
Fig. C-5-3
X-Value Adjustment Hole
Fixed Screw Azimuth Adjustment Screw(A)
Tilt Adjustment Screw(C) Height Adjustment Screw(B)
A/C Head Assembly Fig. C-5-2 4-16
DECK MECHANISM ADJUSTMENT 5-2. Tape Path Check between Pinch Roller and Take up Guide (Check in the Rev Mode) 1) Check the tape pass status between the pinch roller and the take-up guide.(Check there is crumpling of the tape pass and folding of the take-up guide.) 1) (1) When holding of the take-up guide bottom occurs Turn the tilt adjusting screw (C) clockwise and travel it stably to ensure there is no crumbling or folding of the tape. 1) (2) When holding of the take-up guide top occurs Turn the tilt adjusting screw (C) anti-clockwise and
travel it stably to ensure there is no crumbling or folding of the tape. 1) 2) Check there is folding of the tape at the bottom or top of the take-up guide in cutting-off the REV mode
CAUTIONS If the RF waveform is changed after adjusting the A/C head, perform fine adjustment to ensure the RF waveform is flattened.
5-3. Fine Adjustment (Azimuth Adjustment) Fixtures and tools used • Oscilloscope • Standard test tape (only for SP) • Driver (+) Type Ø 4
Connection position • Audio Output Jack
VCR (VCP) status
Adjustment position
• Play the standard test • Tape, 1KHz, 7KHz.
• Azimuth Adjusting Screw (A) • Height Adjusting Screw (B)
Adjustment Procedure
1KHz
1) Connect the probe of Oscilloscope to the audio output jack. 2) Ensure that Audio 1KHz, 7KHz output is flattened at the maximization point by adjusting the Azimuth adjusting screw (A).
7KHz
A: Maximum
B: Minimum
Fig. C-5-4
6. X-distance Adjustment Purpose of adjustment : To maintain compatibility with other VCR (VCP). Fixtures and tools used • Oscilloscope • Standard test tape (only for SP) • Driver (+) Type Ø 4
Connection position
VCR (VCP) status
Adjustment position
• CH-1: PB RF Envelope • Play the standard test • CH-2: NTSC ; SW 30Hz tape. PAL:SW 25Hz • Head switching output point • RF Envelope output point
Adjustment Procedure 1) After releasing the auto tracking, lightly turn the fixing screw. Turn the (+) type driver (Ø 3 ~ Ø 4) on the X-distance adjusting hole to the right or left. Adjust the RF envelope level to the maximum point and then fix the fixing screws. 2) For the 31mm head, adjust it with the SP tape recorded in the width of 31mm since the head travels on the tape track only for SP with the width of 58mm.
Left
Grove of Base A/C
Right
Connection Diagram X-distance Adjusting Hole Fixing Screw Azimuth Adjustment Screw(A)
Tilt Adjusting Screw (C) Height Adjusting Screw (B)
Fig. C-6
OSCILLOSCOPE
RF ENVELOPE OUTPUT POINT CH-1
HEAD RF SWITCHING OUTPUT POINT
4-17
CH-2
DECK MECHANISM ADJUSTMENT 7. Adjustment after Drum Assembly (Video Heads) Purpose of adjustment : To adjust and stabilize the height change, X-distance change, etc depending on the guide roller after assembling the drum. Fixtures and tools used • Oscilloscope • Standard test tape (only for SP) • Post Height Adjusting Driver • Driver (+) Type Ø 5
Connection position
VCR (VCP) status
Adjustment position
• CH-1: PB RF Envelope • Play the blank tape. • CH-2: NTSC : SW 30Hz • Play the standard test PAL:SW 25Hz tape. • Head switching output point • RF Envelope output point
• Fine adjustment of guide roller • Switching Point • Tracking Preset • X-distance
Connection Diagram
Checking/Adjustment Procedure 1) Play the blank tape (empty tape) and check whether the guide roller crumbles or wrinkles the tape and adjust it if necessary. 2) Check that the RF envelope output waveform is flat, and adjust the height of the guide roller while playing the standard test tape. 3) Adjust the switching point. 4) Check the RF envelope output is the maximum when the tracking control locates at the center. If not maximum, set up to ensure that RF envelope output becomes the maximum by turning the (+) type driver (Ø 3 ~ Ø 4) on the base A/C groove.
OSCILLOSCOPE
RF ENVELOPE OUTPUT POINT CH-1
CH-2
HEAD RF SWITCHING OUTPUT POINT
Waveform V1/V MAX = 0.7 V1/V MAX = 0.8 V1 RF ENVELOPE OUTPUT
V1
V2
8. Check of Traveling Device after Deck Assembly 8-1. Audio, RF Normalization Time (Locking Time) Check in Play after CUE or REV Fixtures and tools used • Oscilloscope • 6H 3KHz Color Bar Standard Test tape • Stop Watch
Measuring standard
Connection position
VCR (VCP) status
• RF Locking Time: Within • CH-1: PB RF Envelope • CH-2: Audio output 5 seconds • RF Envelope output • Audio Locking Time : point Within 10 seconds • Audio output jack
• Play the 6H 3KHz Color Bar Standard Test tape.
Checking Procedure 1) Check that locking time of the RF and Audio waveform is fallen within the measuring standard in conversion of the play mode from the CUE or the REV mode.
2) Readjust the paragraph 5 and 6 if it deviates from the standard.
8-2. Check of Tape Curl and Jam Status Fixtures and tools used • T-160 Tape • T-120 Tape
Fixtures and tools used
Fixtures and tools used
• There must be no jam or curl at the first, middle and end position of tape.
• Travel the tape at the position of its first and end.
Checking Procedure 1) Check there is no abnormality of every traveling post status. 2) There must be no abnormal operation of the counter in
occurrence of folding of the bottom tape. There must be not abnormality of audio signal in damage of the top tape. 3) If there is abnormality, readjust the adjustment paragraph 4 and 5.
4-18
PROTECTION, MAINTENANCE AND CHECK OF VIDEO FUNCTION 1. Checking Points prior to Repair Following abnormal phenomena may be repaired by removal of foreign materials and oil supply. Check oiling is required at the checking set or cleaning status is complete. Determine that necessity of checking and repair the set exists after checking the using period of the set together with the user. In this case, followings must be checked:
Phenomena
Checking Points and Cause
Replacement
Color beat
Pollution of Full-Erase Head
o
S/N, Color Faded
Pollution of Video Head
o
F/E Head
Video Head
Horizontal, Vertical Jitte
Pollution of Video Head or Tape Transport System
o
Poor Sound, Low Sound
Pollution of Audio/Control Head
o
No tape wound or tape wound loosely. Pollution of Pinch Roller or FF or REW impossible, Belt Capstan Belt or slow turning Tape loosely wound in REV or Unloading
Deterioration of Clutch Assembly D37 Torque Pollution of Drum and Traveling Device
Fig. C-9-1 TOP VIEW A/C Head
Pinch Roller
o
o
Belt Capston
Clutch Assembly A37
Fig. C-9-3
CAUTIONS If operation of the position with (O) mark is abnormal even after removing cause, replace it with substitute product since it shows damage or wearing.
Fig. C-9-2 BOTTOM VIEW
* No. (1) ~ (12) shows sequence that the tape moves from the supply reel to the take-up reel.) (6) Base Assembly P3 (7) A/C Head
(3) F/E Head
(8) P4 Post (5) Drum Assembly (Video Head)
(10) Pinch Roller (11) Take-up Guide Post
(4) Base Assembly P2 (2) Tension Post
(9) Capstan Shaft
(1) Supply Reel
(12) Take-up Reel
Fig. C-9-3 Tape Transport System 4-19
PROTECTION, MAINTENANCE AND CHECK OF VIDEO FUNCTION 2. Essential Check and Repair
4. Tools for Check and Repair
Recording density of the video is far higher than the audio. Therefore video parts are very precise so as to allow only error of 1/1000mm or so in order to maintain compatibility with other videos. If one of these parts is polluted or old, same phenomena will appear as they are damaged. To maintain clear screen, regular check, replacement of old and damaged parts and oil supply, etc are essential.
(1) Grease: Floil G-3114 (KANTO) or equivalent grease (Green) (2) Grease: Kanto G-754, PL-433 (Yellow) (3) Alcohol (Isopropyl Alcohol) (4) Cleaning Patch (cloth)
3. Regular Check and Repair Check and repair schedule is not constant since they vary depending on method that the consumer uses video and environment where the video is installed at. However, for the video used by common household, good screen will be maintained if regular check and repair per 1,000 hour is performed. The following chart shows relationship between using time and checking time: Table 1 Time Requiring Checking
About 1 year
About 18 months
About 3 years
5. Maintenance Process 5-1) Removal of Foreign Material (1) Removal of foreign material from video head (Fig. C-9-4) Firstly try to use a cleaning tape. (1) Use a cleaning patch if foreign materials are not removed with the cleaning tape due to severe dirty of the head. Soak the cleaning patch in alcohol and put it to the head tip. Smoothly turn the drum (turning cylinder) to the right or left (In this case, the cleaning patch must not be moved vertically). (1) After completely drying the head, test the traveling status of the tape. (1) If alcohol (Isopropyl Alcohol) remains at the video head, the tape may be damaged when this solution touches with the head surface. Never use a cloth bar (commercial sale)
Average hours used per day
(2) Wipe the tape transport system and the drive system with the cleaning patch soaked in alcohol (Isopropyl Alcohol) when removing foreign materials from them. 1) The part touched with the traveling tape is called as tape transport system. The drive system consists of parts to travel the tape. (2) 2) Care must be exercised so that unreasonable force to change the pattern will be applied to the tape transport system during removal of foreign materials.
One hour
Two hours
Three hours
Drum (Turning Cylinder)
Cleaning Patch (Cloth)
Head Tip
Soak alcohol (Isopropyl Alcohol).
Smoothly turn the drum (turning cylinder) touching the soft surface to the head tip surface.
Fig. C-9-4 4-20
PROTECTION, MAINTENANCE AND CHECK OF VIDEO FUNCTION 5-2) Grease Applications (1) Grease Application Method Apply grease by using a cloth swab or brush. Care must be exercised so that excess quantity should not be used. If the excessive quantity is applied, wipe it with the gauze soaked in alcohol (Isopropyl Alcohol).
NOTE: POSITION OF GREASE APPLICATION (1) Inner Side Surface and Top Surface of Loading Path (2) Stable Adhesion Part of Base P2, P3 (3) Arm Pinch Shaft
(4) Gear Wheel Shaft (5) Reel S. T. Shaft (1) (2) (3) (4): KG-684G (Green) (5): PL-433 (Yellow)
(2) Regular Grease Application Apply grease to the designated application position every 500 hour. (1) Inner Side Surface and Top Surface of Loading Path (2) Stable Adhesion Part of Base P2, P3 Coil (3) Gear Cam Shaft (4) Gear Drive Shaft (5) Clutch Shaft Groove
(6) Guide Part on the Plate Slider Side Wall (Left) (7) Guide Part on the Plate Slider Side Wall (Right) (1) (2) (3) (4) (5) (6) (7): KG684G (Green)
2
2
1
4 1 3
3
4 6
5
7
Chassis (Bottom) 5
Chassis (TOP) Gear Part Cam Part (PL-433.Yellow)
Gear Part (PL-433.Yellow)
Gear Sector
Cam Part Side Application (KG-684G.Green) Gear
Cam
Cam Part (KG-684G , GREEN)
Cam Part (KG-684G , GREEN)
Boss Part Side Wall (PL-433.Yellow)
Gear Rack F/L Gear Part Side Application (PL-433.Yellow)
Base Loading
Gear Drive
Lever Tension Driving Cam Part Lever, Brake Driving Cam Part
Gear Sector Driving Part
Inner Surface of Guide Rail (KG-684G.Green) Lever F/R Driving Part Side Wall Guide Part
Chassis (L)
4-21
Chassis (R)
Side Wall Guide Part Lever, Spring Driving Part
Plate Slider
PROTECTION, MAINTENANCE AND CHECK OF VIDEO FUNCTION Lever, F/R, Base, Tension
GEAR AY, P2 & P3
PL-433 LEVER, F/R
BASE, TENSION
Clutch Contact Part (PL-433, Yellow) Tension Arm Party Hinge Part (PL-433, Yellow)
4-22
MECHANISM TROUBLESHOOTING GUIDE 1.Deck Mechanism A. Auto REW doesn't work.
YES Is the supply to the END sensor END sensor "H"? “H”: more than 3.5V “L”: less than 0.7V~1V
YES
NO Is the Vcc. voltage of End sensor 5V?
NO
Check the syscon power.
YES Replace End sensor.
Is the voltage across IR LED between 0.8~1.5V?
NO
Replace LED.
YES Check syscon circuit.
B. No F/R modes.
YES Is the present mode, F/R Mode?
NO
Is the mode SW assembled correctly (refer to Pages 4-14.)
YES NO Does the Capstan Motor rotate?
YES Does the T/Up, Supply Reel rotate?
YES Check syscon circuit.
4-23
Is the normal voltage supplied to the Capstan Motor Vcc1, Vcc2.?
YES Is terminal voltage (Vctl) of Capstan Motor supply side more than 4V?
YES Replace the Capstan Motor.
NO Check Servo, Power Circuits.
MECHANISM TROUBLESHOOTING GUIDE C. AUTO STOP. (PLAY/CUE/REV) Check aligment positions (page 4-14) Check Pinch spring. In Play/Cue/Rev is the pinch roller in contact with the capstan shaft.
NO Is the output of DFG, DPG OK?
YES Are there T/up and supply reel pulses.
Replace Drum Motor.
NO YES NO Check Servo, Syscon.
YES Check the Syscon, µ-COM.
Replace Reel Sensor.
D. No cassette loading.
Insert the cassette.
YES Does the lever Assembly S/W work normally.
NO Check CST Holder Assembly.
YES Is there variation for CST IN S/W Output? (In Tape with REC Tab “L”c"“H”" “L”) (In Tape without REC Tab “L”" “H”" “L”" “H”)
NO
Does the CST IN S/W work normally?
NO Replace CST IN S/W.
YES YES NO Check Syscon Circuit.
Check Syscon Circuit.
4-24
MECHANISM TROUBLESHOOTING GUIDE E. In PB mode Tape Presence not sensed.
Is the Pinch Roller attached to the Capstan Motor Shaft?
NO
Check Alignment positions (page 4-14)
YES NO Does the T/Up Reel turn?
NO Is the Belt ok?
YES
Replace the Belt.
YES Check the clutch and the Idler Assembly.
Does the Capstan Motor turn?
YES Does the Drum Motor turn?
NO
YES
Is the Voltage supplied to the Capstan Motor Vcc1,Vcc2 each?
YES Is the terminal voltage of Capstan Motor supplied more than 4V?
Are there DPG, DFG Pulses?
YES
NO Check Servo, Power.
YES
Are the T/Up Supply Reel Sensors ok?
Replace the Capstan Motor.
YES NO Check Servo, Syscon.
Is the Vcc voltage of the Drum Motor normal?
NO Check Syscon, Circuit.
YES Is the terminal voltage of the Drum Motor more than 2.3V?
YES Replace the Drum Motor.
4-25
NO Check Syscon, Circuit.
MECHANISM TROUBLESHOOTING GUIDE 2. Front Loading Mechanism A. Cassette cannot be inserted. Does the Lever Assembly Switch work?
NO
Is the Lever Assembly Switch Spring damaged or omitted?
YES YES
Does the CST IN Switch work normally?
Is the Vcc of Main P.C.Board 5V?
NO
Replace or add the Lever Assembly Switch Spring.
NO Replace CST IN Switch.
YES Check syscon circuit.
NO
YES
Is the voltage between cassette switch and GND on Main P.C.Board 5V??
Check power circuit.
NO
YES
Check Mode switch location and syscon circuit.
Is there a short circuit between cassette switch and GND on main P.C.Board?
NO
YES
Remove the short circuit part or Replace the main P.C.Board.
Replace CST IN Switch.
B. Cassette will not eject.
Does the L/D motor rotate in reverse?
NO
Check L/D Motor or Drive IC.
YES Does the Lever Assembly Switch work?
NO Replace lever Assembly Switch.
YES NO Does the F/L Arm Assembly work normally?
Replace F/L Arm Assembly .
YES NO Does the Door Opener work?
Replace the Door Opener.
4-26
MECHANISM TROUBLESHOOTING GUIDE C. Cassette will not load.
Does the CST insert?
YES Does the CST insert?
YES
NO
Replace the Lid Opener.
Does the F/L Gear Rack work?
YES
NO
Does the Door Opener work?
YES
NO
Does the F/L Arm Assembly work?
YES
Check the power of L/D Motor.
NO
Replace the Front Loading Mechanism Assembly.
4-27
Replace the F/L Arm Assembly.
NO
Does the Cassette Holder Assembly move the F/L Arm Assembly?
YES
Is the Door opener assembled correctly?
NO
Does the L/D Motor work?
YES
Replace the F/L Rear Rack.
Is the Cassette Holder Assembly assembled correctly?
EXPLODED VIEWS
1. Front Loading Mechanism Section
103
110
116
115
A24
105
112
113
106
102
100
114
032
107
A23
A21
109
054
A22
054A
4-28
EXPLODED VIEWS
2. Moving Mechanism Section (1)
OPTIONAL PART
031
079
011
017
022
032
A01
003
012
024
004
008
406
006
A03
409
007
013
016
014
015
009
405
027
026
028
031
029
021
4-29
EXPLODED VIEWS
3. Moving Mechanism Section (2)
518 055
060
051
080
056
058
052
061
052A
517
410
064
A11
067
077
066 065
032
068
070
069
023
A12
076
078
4-30
SECTION 5 RS-02A LOADER PART CONTENTS ELECTRICAL TROUBLESHOOTING GUIDE .....................................................................................5-2 THE DIFFERENCE OF DVD-R/RW, DVD+R/RW DISCS AND DVD-ROM ..................................5-15 1. 2. 3. 4.
RECORDING LAYER ............................................................................................................................5-15 DISC SPECIFICATION ..........................................................................................................................5-16 DISC MATERIALS .................................................................................................................................5-16 ORGANIZATION OF THE INNER DRIVE AREA, OUTER DRIVE AREA, LEAD-IN ZONE AND LEAD-OUT ZONE..................................................................................................................................5-20
HOW TO USE TEST TOOL .....................................................................................................................5-24 1. ALPC MEASUREMENT SYSTEM .........................................................................................................5-24 2. ALPC PROGRAM ..................................................................................................................................5-24 3. EXECUTE ALPC PROGRAM ................................................................................................................5-25 4. OPTICAL POWER SETTING ................................................................................................................5-27 5. CONFIRM OPTICAL POWER SETTING PARAMETER .......................................................................5-28 6. ATTACHMENT. OPTICAL POWER MEASUREMENT ..........................................................................5-29
INTERNAL STRUCTURE OF THE PICK-UP ....................................................................................5-30 1. BLOCK DIAGRAM OF THE PICK-UP (LPC-812R)...............................................................................5-30 2. PICK UP PIN ASSIGNMENT.................................................................................................................5-31 3. SIGNAL DETECTION OF THE P/U.......................................................................................................5-32
DESCRIPTION OF CIRCUIT...................................................................................................................5-33 1. ALPC (AUTOMATIC LASER POWER CONTROL) CIRCUIT ...............................................................5-33 2. FOCUS/TRACKING/SLED SERVO CIRCUIT .......................................................................................5-34 3. SPINDLE SERVO CIRCUIT ..................................................................................................................5-36
MAJOR IC INTERNAL BLOCK DIAGRAM .......................................................................................5-37 LIC121 (AN22113A) : FEP(RF) ANALOG SIGNAL PROCESSOR. ..........................................................5-37
CIRCUIT DIAGRAM ...................................................................................................................................5-41 CIRCUIT VOLTAGE CHART ...................................................................................................................5-43 PRINTED CIRCUIT DIAGRAM...............................................................................................................5-45 1. MAIN P.C.BOARD (TOP VIEW).............................................................................................................5-45 2. MAIN P.C.BOARD (BOTTOM VIEW) ....................................................................................................5-47
5-1
ELECTRICAL TROUBLESHOOTING GUIDE Reset or power check.
Check it after connecting the power cable only on interface cable for NO Reset or Power ON.
Are the pin1 of LPB272+5V, pin4 of LPB272+12V respectively after the power cable connecting?
NO
Check the power (5V/12V) short. Repair the SMPS Block
NO
Check the LIC302 Check the LIC201, LIC121.
NO
Check the LX201 (16.9MHz). Check the LIC201.
YES
Does the pin #8 (Reset) of LIC302 change 0V to 3.3V at the power supply initial input mode? YES
Are the LX201 oscillating? YES
Is the collector of LQ402 3.3V?
NO
Check the LIC301 pin27 and LQ402.
YES
1. 65V (VREF) : Check pin113 of LIC121 2. 2V (HDVREF) : Check pin78 of LIC121
NO
Check the LIC121.
YES
OK
5-2
System check.
Load tray without inserting disc. YES
Does Tray operate normally?
NO
Go to “Tray operating is abnormal”
YES
Does Pick-up move to inside or outside?
NO
Go to “Sled operating is abnormal”
YES
Does Pickup lens move up/down?
NO
Go to “Focus Actuator operating is abnormal”
YES
Does Laser turn on?
NO
Go to “Laser operating is abnormal”
YES
After eject tray, Insert CD-ROM Disc and check rotation. YES
Does Disc rotate continuously and the drive recognize the disc?
NO
Go to “Recognition fail Case1 (CD-ROM Disc)”
NO
Go to “Recognition fail Case2 (DVD Disc)”
NO
Go to “Recognition fail Case3 (Blank DVD+R/RW)”
YES
After eject the tray, Insert DVD Disc and check rotation. YES
Does Disc rotate continuously and the drive recognize the disc? YES
After eject the tray, Insert DVD+R/RW Disc and check rotation. YES
Does Disc rotate continuously and the drive recognize the disc? YES OK
5-3
Tray operating is abnormal.
Tray open doesn’t work. YES
Is there Tray control signal input? (LIC301 pin22)
NO
• Check the connction of LIC201 pin 66. • Replace the LIC201. • Check the communication line between LIC201.
YES
Is there Tray drive voltage output? (LIC301 pin14, 15)
NO
When LPF303 is open, Is there Tray drive signal output?
YES YES
Check the connctor (LPF303) FFC cable.
5-4
NO
Replace the LIC301.
Sled operating is abnormal.
Is there Sled control signal output? (LIC201 pin68, 69)
NO
Replace the LIC201.
YES
Is there Sled drive voltage input? (LIC301 pin4, 30)
NO
Check the LR316, LR317.
YES
Is there Sled drive voltage output? (LIC301 pin1, 2, 32, 33)
NO
Is CTL1 signal “H”? (LIC301 pin28)
YES YES
Is there Tray control signal input? (LPM302 pin1, 2, 3, 4)
Replace the LIC301.
NO
Replace the Sled Motor.
YES
Check the Connection LPM302 with sled motor.
5-5
NO
Check the connection of LIC121 pin31.
YES
Replace the LIC121.
Spindle operating is abnormal.
Is there Spindle control DSP output? (LIC201 pin70)
NO
Replace the LIC201
YES
Is there Spindle drive voltage output? (LIC302 pin19, 21, 24)
NO
Replace the LIC302
YES
Is there Spindle drive voltage output? (LPM301 pin11, 12, 13)
NO
Check the signal pattern between LIC302 and LPM301
YES
Is there spindle motor’s hall signal sensor output? (LPM301 pin4, 5, 6, 7, 8, 9)
NO
Replace the Spindle Motor
YES
Is there spindle FG signal? (LIC302 pin4)
NO
Replace the LIC302
YES
Check the LIC302 application componets
5-6
Focus servo is unstable
Is FE signal output normal in focusing Up/Down? (LIC121 pin25*)
NO
Check Pickup Read Power is 1.3~1.7mW?
NO
Replace the Pick up.
YES YES
Is FDRV signal output normal in focusing Up/Down? (LIC201 pin 62)
Replace the LIC121.
NO
Replace the LIC201.
YES
* LIC121 pin25 is MOUT2(FEP Monitor2). After disc recognition action, Monitor port is off. So, please check FE signal during disc recognition.
Go to “Focus actuator operating is abnormal”
Focus actuator operating is abnormal.
Is there focus search control signal input? (LIC301 pin23)
NO
• Check the connection of LIC201 pin62. • Check the communication line between LIC121 and LIC201. • Replace the LIC201.
YES
Is there focus search drive voltage output? (LIC301 pin18, 19)
YES
Check the connection LPM101 pin40, 41.
NO
Is CTL1 signal “H”? (LIC301 pin28)
YES
Replace the LIC301.
Replace the pick-up.
5-7
NO
Check the connection of LIC121 pin31. Replace the LIC121.
Track servo is unstable
Is TE signal output normal in focusing ON and tracking OFF? (LIC121 pin 24*)
NO
Is PICK UP (E, F, G, H) output normal? (LPM101 pin8, 5, 9, 4)
NO
Check the PICK UP FFC. Replace the PICK UP.
YES
Replace the LIC121.
YES
Is there TDRV signal output in tracking ON? (LIC201 pin66)
NO
Replace the LIC201.
YES
* LIC121 pin24 is MOUT1(FEP Monitor1). After disc recognition action, Monitor port is off. So, please check TE signal during disc recognition.
Check the Drive IC (LIC301) and P/U referring to “Focus actuator operating is abnormal”.
5-8
Recognition fail case 1 : CD-ROM fail
Check pick-up Read power was 1.3 ~1.7mW?
NO
Go to “LD CHECK”.
YES
Does focus servo operate normally?
NO
Go to “Focus servo is unstable”.
YES
Check pick-up RF signal LIC121(pin81) RFOUT was 2~2.5V?
NO
Check the pick-up FFC and LPM101. Replace the pick-up.
YES
Check EQOUTP waveform (LIC121 pin74) was 1.75~2.3V?
NO
Replace LIC121.
YES
Check after replacing LIC201. It is OK?
NO
Go to “Tracking servo is unstable”.
YES
OK
5-9
Recognition fail case 2 : DVD Disc
Check pick-up read power was 1.1~1.3mW.
NO
Go to “LD CHECK”.
YES
Check pick-up RF signal LIC121(pin81) RFOUT was 2~2.5V?
NO
Replace the Pickup.
YES
Is there RF signal at LIC121 pin95(RFP) and pin96 (RFN)?
NO
Replace the LIC121.
YES
Check again after the replace LIC121 It is OK?
NO
Replace the LIC201.
YES
OK
Recognition fail case 3 : Blank DVD+R/RW
Is there WBL (LIC121 pin63) Signal? YES
Replace LIC121.
NO
Is there WBL (LIC201 pin39) Signal? YES
Check the connection between LIC121 and LIC201.
5-10
NO
Replace LIC201.
In case of writing fail.
Normal case
Check the media DVD R/RW?
NO
Check disc label.
YES
Does the disc have any dust, scratch, fingerprint ...?
Finalized disc?
YES
Remove the dust, fingerprint and if the disc has long width scratch, change it.
NO
Eject disc.
YES
If DVD If DVD
R disc,use new DVD R disc. RW disc,erase the disc.
Go to “Writing part check”.
5-11
Writing Part Check
Load tray with DVD
R/RW disc.
Press the “REC” key.
Does writing finish without any error?
NO
YES
Is the written file read normally?
NO
Eject tray.
Go to “LD CHECK”.
Is the re-written file read normally?
YES
YES YES
Check and replace LIC201, LIC121, LIC101.
OK
5-12
LD CHECK (Laser operating is abnormal)
Perform 6. Optical power setting parameter check from “How to use Test tool”.
Is ALPC parameters valid?
YES
Execute “C.Laser power setup” of “How to use test tool”
NO
Perform 5. Optical Power Setting
OFF level
N.G
Check reference voltage.
OK
W1SET level & FPD
N.G
E
OK
W2SET level & FPD
N.G
F
OK
W3SET level & FPD
N.G
G
OK
OK
5-13
E
CD/DVD?
DVD
CD
Select Mode : CD, Test and perform Test from 4. LD Test of “How to use Test tool”
Select Mode : DVD, Test and perform Test from 4. LD Test of “How to use Test tool”
Check the input of CD/DVD. (pin10 of LPM 101)
Check the input of CD/DVD. (pin10 of LPM101)
Check the input of W1SET. (pin12 of LPM101)
Check the input of FPD. (pin126 of LIC121)
END
5-14
F
Select Mode : DVD, Test and perform Test from 4. LD Test of “How to use Test tool”
G
Select Mode : DVD, Test and perform Test from 4. LD Test of “How to use Test tool”
Check the input of CD/DVD. (pin10 of LPM101)
Check the input of CD/DVD. (pin10 of LPM101)
Check the input of W2SET. (pin13 of LPM101)
Check the input of W3SET. (pin14 of LPM101)
Check the input of recording pulse. (pin19, 20, 21, 22, 23, 24 of LPM101)
Check the input of recording pulse. (pin19, 20, 21, 22, 23, 24 of LPM101)
Check the input of FPD. (pin126 of LIC121)
Check the input of FPD. (pin126 of LIC121)
END
END
5-15
THE DIFFERENCE OF DVD-R/RW, DVD+R/RW DISCS AND DVD-ROM 1. RECORDING LAYER • DVD-ROM (Read Only Disc)
4 0.7
um
3T
0.4 um
• DVD+R/RW Disc
5-16
2. DISC SPECIFICATION
3. DISC MATERIALS 1) DVD-ROM
5-17
2) Recording format using organic dye material (DVD-R / DVD+R) The format that records data through the creation of recorded marks by changing the organic dye material with a laser beam.
• Disc structure
• Recording principles [ Recording ] Recording is done by changing the organic dye layer and the substrate with a laser When a strong laser is applied to a disc, the temperature of the organic dye material goes up, the dye is decomposed and the substrate changes at the same time. At this time, a durable bit is created as is the case with a CDROM. [ Playback ] Signals are read with the differences of the reflection of a laser from pits.
5-18
3) Recording format using phase-change recording material (DVD-RW / DVD+RW) Data is recorded by changing the recording layer from the amorphous status to the crystalline status, and played back by reading the difference of the reflection coefficient. Amorphous : Non-crystalline.
• Disc structure
• Recording principles [ Recording ] When a high-power laser is applied to the recording material, it melts and then becomes amorphous with a low reflection coefficient when it quickly cools off. When a mid-power laser is applied to heat gradually the recording material and then gradually cools it off, it becomes crystal with a high reflection coefficient. [ Playback ] A low-power laser is used for playback. The amount of reflected light depends on the status (amorphous or crystalline) of the recording material. This is detected by an optical sensor.
5-19
To make recordings, it is necessary to modulate the write pulse, which is called “Write Strategy”. There can be many types in Write Strategy. Typically Write Strategy for DVD R has NMP(Non Multi-Pulse) type and MP(Multi-Pulse) type. In NMP type each single mark is created by subsequent separated short pulses. In MP type each single mark is created by one continuous pulse. Write Strategy for DVD RW has Type 1 and Type2. In Type 1 the mark with nT width is created by one top pulse and (n-2) multi-pulses. Thus mark 3T is made by one top pulse and one multi-pulse. In Type 2 the mark with nT width is created by one top pulse and (n-3) multi-pulses. Thus mark 3T is made by one top pulse only. RL-02A uses MP type Write Strategy for DVD R and Type 1 for DVD RW as shown below.
5-20
4. ORGANIZATION OF THE INNER DRIVE AREA, OUTER DRIVE AREA, LEAD-IN ZONE AND LEAD-OUT ZONE 1) Layout of DVD-ROM disc
2) Layout of DVD+R disc
5-21
3) Layout of DVD+RW disc
5-22
4) Layout of DVD-R/RW disc
5-23
HOW TO USE TEST TOOL 1. ALPC MEASUREMENT SYSTEM We need basically several measurement instrument to adjust Optical Power of CD and DVD Disc
• ESSENTIAL INSTRUMENT 1) Optical Power meter & Sensor (ADVANTEST, TQ8230/Q82014A) 2) Personal Computer 3) Adjustment Program (Dragon or ALPC) --> being recommended ALPC Program in case of SVC
• OPTIONAL INSTRUMENT 1) USB-ATAPI Interface (if you don’t have Notebook which has ATAPI Interface or use PC USB Port) 2) Connector-ATAPI Interface Board
Connector-ATAPI Interface Board
2. ALPC PROGRAM Use the ALPC program in Dragon tool for Optical power setting. It is consist of total 4 files. Dragon_JW3P.exe dragon.cfg blue.dat WNASPI32.DLL Four files must exist in same Directory.
5-24
3. EXECUTE ALPC PROGRAM 1) Execute Dragon_JW3P.exe file.
2) Enter the password. It is “qaz”. When you enter the password, turn off the “Caps lock” in your keyboard.
3) Set up the target device. Press “ATAPI” button on the main dialog of Dragon tool. And find the target device which is GDA-4164L.
5-25
4) If the target device setting is completed, execute the “Setup Laser Power(Manual)” in the “Alpc/Opc” menu.
5-26
4. OPTICAL POWER SETTING When you change the Travers ass’y(including pick-up) or loader PCB, you must do the laser power setting to match pick-up and loader PCB.
1) DVD LD power setting • Select the DVD in the “Select Laser Diode” • Press
(Read power on, Strong read light)
• Measure optical read Power. • Write read power value. • In case of
,
you are able to measure the power through same procedure. (caution) Don’t watch light directly. • When you finish optical power measurement, press
button(LD Off).
• Press
button.(save to ERPROM)
2) CD LD Power Setting • Select the CD in the “Select Laser Diode” • Press
.
• Measure optical read Power. • Write Read Power value. • Press
button(save to ERPROM)
*** In case of CD power setting of RS-02A, loader don’t need to set up write power. Although NMP, MP,Erase and HC power is N.G when you press setup, please ignore the N.G message. Because of RS-02A only support reading function about CD-R/RW. * Look at reference sheet to test Optical Power. ** Power value is ß---- unit. Value is read power X 100.
5-27
5. CONFIRM OPTICAL POWER SETTING PARAMETER LD Test result is ok, but Loader performance is bad.
1)
1. Check ALPC parameter value 1) Press 2) Press
++
button to open “Results Display” dialog.
ALPC Para
button.
- We can see optical power setting value. - Write optical Power Setting value to paper. - Adjust power setting again. - Compare original parameter to new parameter. - if parameter value is different highly, original value is wrong or optical power may change. - But pick-up LD test is all ok, just adjust optical power setting again.
Normal range of ALPC parameter
Optical power value which has been saved in the EEPROM
5-28
2)
6. ATTACHMENT. OPTICAL POWER MEASUREMENT Optical Power measurement is to adjust LD power from Pick-up To measure optical power, LD status is on. Other light affects to optical power. Avoid other light to measure exact power Generally headlight power is about 50µW, Sun power is about 100mW. Optical Power measurement method 1. Fit optical Power Meter (wavelength) value to DVD.(generally 660nm) 2. DVD LD On. 3. Approach power sensor to Pick-up Lens about 3mm vertically. Fix Lens and Sensor mark position. 4. Read Monitor value. (move sensor read just a little and read max value.) (caution) unit is mW. 5. Write monitoring value x 100. Only an integer. 6. Fit opticcal Power Meter (wavelength) value to CD.(generally 780nm) 7. CD LD On. 8. 3 ~ 5 recheck.
5-29
INTERNAL STRUCTURE OF THE PICK-UP 1. BLOCK DIAGRAM OF THE PICK-UP (LPC-812R)
5-30
2. PICK UP PIN ASSIGNMENT No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
Pin Name VC(PDIC) VCC(PDIC) GND(PDIC) EF4 EF1 A B EF2 EF3 C D SW1(PDIC) RF+ RFSW2(FPD) VCC(FPD) GND(TEMP) VREF(FPD) FPD-OUT TEMP GND(FPD) W1DISN W1DIS W2DISN W2DIS W3DISN W3DIS OSCEN GND(LDD) GND(LDD) VCC(LDD) W3SET W2SET W1SET RSET OUTSEL ENABLE VCC(LDD) GND(LDD) F+ FTilt+ TiltT+ T-
Signal Description Reference voltage input for PDIC) Power supply for PDIC (+5V) Ground connection for PDIC, FPD, TEMP, LDD Signal PDIC output EF4 Signal PDIC output EF1 Signal PDIC output A Signal PDIC output B Signal PDIC output EF2 Signal PDIC output EF3 Signal PDIC output C Signal PDIC output D PDIC output gain Select (L/M/H) Signal PDIC RF positive differential output Signal PDIC RF negative differential output FPD output gain Select (High : CD, Low:DVD) Power supply for FPD Ground connection for PDIC, FPD, TEMP APC amplifier reference voltage output APC amplifier output Output voltage for controlling temperature Ground connection for PDIC, FPD, TEMP LVDS control for output current (Low Enable) LVDS control for output current (High Enable) LVDS control for output current (Low Enable) LVDS control for output current (High Enable) LVDS control for output current (Low Enable) LVDS control for output current (High Enable) TTL control for Oscillator Enable (High Enable) Ground connection for LDD Ground connection for LDD Power supply for LDD Input voltage for current amplifier Input voltage for current amplifier Input voltage for current amplifier Input voltage for current amplifier High:selects DVD LD, Low:CD LD Disables output current regardless of OUTEN (ENABLE Low : No lout) Power supply for LDD Ground connection for LDD Focusing Actuator drive signal+ Focusing Actuator drive signalTilting Actuator drive signal+ Tilting Actuator drive signalTracking Actuator drive signal+ Tracking Actuator drive signal5-31
3. SIGNAL DETECTION OF THE P/U
1) Focus Error Signal ==> (A+C)-(B+D) This signal is generated in RF IC (LIC121 : AN22113A) and controls the pick-up’s up and down to focus on Disc.
2) Tracking Error Signal (DPP Method) ==> {(A+D)-(B+C)}- k x {(EF1+EF4)-(EF2+EF3)} This signal is generated in RF IC (LIC121 : AN22113A) and controls the pick-up’s left and right shift to find to track on Disc.
3) RF Signal ==> (A+B+C+D) This signal is converted to DATA signal in DSP IC (LIC201 : MN103SA6G).
5-32
DESCRIPTION OF CIRCUIT 1. ALPC (AUTOMATIC LASER POWER CONTROL) CIRCUIT 1-1. BLOCK DIAGRAM
1-2. ALPC (AUTOMATIC LASER POWER CONTROL) CIRCUIT OPERATION THE ALPC BLOCK DETECTS THE LASER OUTPUT POWER OF THE FRONT MONITOR. THE POWER SIGNAL DETECTED WITH THE PD FOR FRONT MONITOR DETECTION IS INPUT THE VOLTAGE FROM THE VPD PIN (123PIN) OR THE FPDM PIN (127PIN), THE REFERENCE SIGNAL OF THE INPUT SIGNAL IS INPUT FROM THE VREFPD PIN (124PIN). THE ALPC BLOCK GENERATES THE SINGALS FROM THE INPUT LASER POWER SIGNALS IN THE FOLLOWING DETECTION SYSTEMS. THIS BLOCK HAS FOUR DETECTION PATHS : ALL AVERAGE VALUE PATH, MULTI PULSE AVERAGE/PEAK VALUE DETECTION PATH, ERASE/BOTTOM VALUE DETECTION PATH, SPACE/PLAYBACK POWER VALUE DETECTION PATH.
5-33
2. FOCUS/TRACKING/SLED SERVO CIRCUIT 2-1. FOCUS, TRACKING & SLED SERVO PROCESS
5-34
2-1. FOCUS, TRACKING & SLED SERVO PROCESS
5-35
3. SPINDLE SERVO CIRCUIT 3-1. SPINDLE SERVO PROCESS
5-36
MAJOR IC INTERNAL BLOCK DIAGRAM LIC121 (AN22113A) : FEP(RF) ANALOG SIGNAL PROCESSOR • PIN ASSIGNMENT
5-37
• BLOCK DIAGRAM
5-38
• BLOCK DIAGRAM
5-39
MEMO
5-40
CIRCUIT DIAGRAM
5-41
5-42
CIRCUIT VOLTAGE CHART MODE PIN NO.
STATE
LIC101 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
3.29 0.00 3.28 0.00 4.99 0.00 0.00 4.98 0.00 4.99 0.00 0.00 0.00 4.99 0.00 1.09 3.28 0.00 4.99 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.97 0.00 3.29 0.36 0.00
LIC121 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
0.00 0.00 1.69 1.64 1.66 2.67 2.60 0.00 0.00 1.65 0.00 0.25 1.58 1.82 2.20 3.29 1.65 1.56 0.00 2.50 1.42
MODE PIN NO. 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76
STATE 1.57 1.33 1.10 1.33 0.00 0.00 3.30 0.00 0.00 0.00 0.00 0.00 0.00 3.20 3.29 0.00 0.00 0.00 0.00 1.61 3.29 3.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.96 1.23 1.65 1.62 1.65 0.61 3.29 0.00 0.00 0.00 2.95 3.29 1.21 1.34 1.16 1.34 1.35 0.50 0.70 0.00 2.03 2.03 2.14 0.30
MODE PIN NO. 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128
STATE 2.19 2.19 2.16 4.98 2.18 2.96 2.14 2.79 2.21 2.49 2.85 2.20 2.16 2.19 2.19 2.19 1.68 1.67 2.37 2.37 2.19 2.19 1.62 1.49 1.44 0.00 1.65 1.65 1.65 1.65 1.65 1.65 0.00 0.00 4.96 0.00 1.65 1.65 4.96 1.65 1.65 0.00 0.00 1.65 1.66 0.00 0.00 2.51 0.81 2.50 0.00 2.50
LIC201 1 2
1.65 1.19
MODE PIN NO. 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57
STATE 1.64 1.18 1.65 1.19 0.14 0.00 3.30 1.65 1.65 0.00 1.50 2.19 3.30 0.27 0.27 0.23 0.00 0.25 0.00 1.43 1.57 0.00 2.01 3.29 3.28 2.24 1.73 1.29 2.02 2.03 3.28 0.85 0.00 3.28 0.00 0.00 2.95 0.00 0.00 0.00 0.00 0.00 0.00 3.29 3.29 0.00 0.00 0.00 0.00 0.70 0.00 0.00 3.29 0.56 0.00
MODE PIN NO. 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112
STATE 1.17 0.00 3.27 1.65 1.65 1.06 0.00 0.20 1.65 0.00 1.69 1.52 1.65 5.00 1.23 1.63 1.60 1.50 0.61 3.28 0.00 3.26 2.80 2.14 2.67 0.00 1.17 3.27 2.82 2.20 2.40 2.70 2.20 2.70 2.20 2.20 2.20 0.00 3.28 2.20 2.18 2.18 2.17 0.00 3.27 2.15 0.00 3.27 0.00 4.96 0.00 4.96 0.00 1.66 0.00
MODE PIN NO. 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167
5-43
STATE 0.00 4.96 3.28 3.25 0.00 PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE 0.00 1.17 3.29 3.29 3.29 3.29 3.29 2.68 3.28 0.00 0.00 0.00 PULSE PULSE PULSE PULSE 0.00 3.29 PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE
MODE PIN NO. 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216
STATE PULSE PULSE PULSE PULSE PULSE PULSE PULSE 0.00 3.29 PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE 1.17 PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE 3.28 0.00 3.26 3.26 0.00 0.00 0.00 OSC OSC 3.28 0.00 0.00 0.00 3.28
LIC261 1 2 3 4 5
3.29 PULSE PULSE 0.00 PULSE
5-44
MODE PIN NO. 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
STATE PULSE 3.29 PULSE PULSE 0.00 PULSE PULSE 3.29 PULSE PULSE PULSE PULSE 0.00 PULSE PULSE PULSE PULSE PULSE PULSE 3.28 0.00 PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE 3.29 PULSE PULSE 0.00 PULSE PULSE 3.29 PULSE PULSE 0.00 PULSE PULSE 0.00
LIC262 1 2 3 4 5 6 7 8 9
PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE
MODE PIN NO. 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
STATE
PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE 0.00 PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE PULSE 0.00 PULSE
LIC301 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
-0.22 -0.22 12.40 1.61 1.00 0.00 0.00 1.64 1.30 1.24 12.40 1.64 1.63 6.38 6.38
MODE PIN NO. 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
STATE 2.51 2.51 2.37 2.70 2.49 2.58 1.63 1.60 5.00 5.00 1.25 3.66 3.22 3.22 1.75 12.39 0.11 1.38 0.00
LIC302 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
5.00 0.00 0.00 PULSE 4.29 3.22 3.00 3.26 1.27 1.76 1.64 0.88 2.97 2.97 2.94 2.94 2.94 2.94 0.98 0.00 0.98 0.00 0.00 0.98 12.40 12.40 12.40 12.40
PRINTED CIRCUIT DIAGRAMS 1. MAIN P.C.BOARD (TOP VIEW)
5-45
5-46
2. MAIN P.C.BOARD (BOTTOM VIEW)
5-47
5-48
NOTES) If you want to purchase
NOTES)
Flash memory, you must order " IC1301A"
Warning Parts that are shaded are critical with respect to risk of fire or electrical shock.
SECTION 6 REPLACEMENT PARTS LIST MODEL : RC797T(LGEUS) S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
RUN DATE : 18-JANUARY-07 REMARKS
*** INDIVIDUAL PARTS *** 250
MBN31843206
Case
PRESS PCM 0.525 RC200 PRESS TO
255
4986R-0033H
Gasket
COMPLEX DVD RC1000 JERSEY 8(W)
272
MAZ31842701
Bracket
PRESS SECC 1.2 VCR RC200 PRESS
274
MGJ31843001
Plate,Ground
PRESS PB 0.2
300
6410RGHV01A
Power Cord
VCTFK 2X0.75 NM Molded plug TW
457
1SZZR-0098E
Screw,Customized
- + 3MM 12MM MSWR FZW SIN JIN
462
1SZZR-0098H
Screw,Customized
- + 3MM 8MM MSWR FZW SIN JIN
463
1SZZR-0098G
Screw,Customized
1SZZR-0098G FH + 3MM 8MM MSWR
465
1SZZR-0097N
Screw,Customized
- + 3MM 8MM MSWR FZB SIN JIN
469
1SZZR-0098J
Screw,Customized
1SZZ0098J BH + 3MM 6.5MM MSWR
470
1SZZR-0098K
Screw,Customized
- + 3MM 21MM MSWR FZY SIN JIN
472
353-022S
Screw,Customized
BZN BK (CR +3) SPECIAL + 3MM 6
475
1WSV1200084
Washer,Common
1WSV1200084 SPRING 1.2MM 500UM
476
1NHD8220060
Nut,Common
1NHD8220060 HEX 300UM BN BSP
801
AFN32624421
Manual Assembly,Owners
VCR RC297H-M.NA1ULLB ASS'Y
802
3890R-C467X
Box,Master
BOX SWM3 499 167 375 4 COLOR R
803
MFZ34189116
Packing
CUTTING EPS VCR RC200 150g REC
804
292-053B
Bag
CUTTING LDPE 0 0 0.03 SOFT(MID
808
534-008C
Dry Cell Battery
AAA(R03) 1PAIR 1.5V 50MAH AAA
832
3008R-0010J
Blank Disk
DVD CMCW02(DVD-RW) CMC FOR PAP
900
AKB32606601
Remote Controller Assembly
V3 RC297H-M LG D2A
CABLE5
EAD35755201
Cable,FFC
AT05040230D02 230MM 0.50MM 40P
CABLE7
EAD35827401
Harness,Single
4P 160MM SMH200-04 TJC2004-04Y
NSP
*** Accessory Assembly *** 810
6851R-0039B
Accessory Assembly
806
6850R-CAA8E
Cable,Assembly
VCR LGEIN NTSC RF 1.8M + 1W YE HAR-20013,RF CABLE,BLUE TIE NT
811
6850R-PAA8F
Cable,Assembly
HAV-10001-01 RCA PLUG(3.2) RCA
812
6850R-PBA8H
Cable,Assembly
HAV-10004-01 RCA PLUG(3.2) RCA
*** Deck Assembly,Video *** A00
6721RF0943K
Deck Assembly,Video
DECK/MECHA D37(N) DI (4HF,NT,A
009
4260R-0056A
Arm
MOLD POM DECK/MECHA T/UP OTHER
NSP
012
3041R-M037A
Base Assembly
P2 -D37
012
3041R-M037B
Base Assembly
P2-D37 -
013
3041R-M038A
Base Assembly
P3 - D37
013
3041R-M038B
Base Assembly
P3-D37 -
014
3041R-M039A
Base Assembly
P4 - D37
016
3041R-M036D
Base Assembly
A/C HEAD (ALPS) - D37 (DUMMY H
016
3041R-M036E
Base Assembly
A/C HEAD (TDK) - D37 (DUMMY HE
023
3040R-M056A
Base
MOLD ABS LOADING OTHER - D37
029
4261R-0037A
Arm Assembly
DECK/MECHA PINCH - D37 (CHON P
029
4261R-0037B
Arm Assembly
VCR DECK/MECHA PINCH - D37 (YA
029
4261R-0037C
Arm Assembly
DECK/MECHA PINCH - D37 (MEIJI)
ALTERNATE
029
4261R-0037D
Arm Assembly
DECK/MECHA PINCH - D37 (CHON
ALTERNATE
029
4261R-0037E
Arm Assembly
DECK/MECHA PINCH - D37 (YAMAU
ALTERNATE
032
3141R-M002A
Frame Assembly
D37
077
3300R-M203A
Plate
PRESS STS 301 T0.3 SLIDER OTHE
079
3040R-M057A
Base
MOLD ABS TENSION OTHER - D37
6 - 1
ALTERNATE ALTERNATE
ALTERNATE
ALTERNATE
NSP
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
100
3301R-M193A
Plate Assembly
TOP - D37
405
1MPC0301270
Screw,Machine
PH + 3MM 3.5MM SWRCH FZW - -
406
1MEC0302018
Screw,Machine
PWH + 2.6MM 6MM MSWR FZY SPR W
409
1SZZR-0032B
Screw,Customized
- + 2.6MM 5MM SWRCH FZY SIN J
410
1APF0262218
Screw,Taptite
PH + B 2.5MM 6.8MM SWRCH FZY
517
1WZZR-0004D
Washer,Customized
1WZZR-0004D PLAIN 5MM 500UM RE
517
1WZZR-0004F
Washer,Customized
DECK/MECHA D37 OTHER STOPPER
518
1WZZR-0004A
Washer,Customized
STOPPER
A23
4261R-0038A
Arm Assembly
DECK/MECHA F/L - D37
110
4260R-0051A
Arm
MOLD POM DECK/MECHA F/L(L) OTH
112
3070R-0002A
Plate
F/L
113
4970R-0169A
Spring
EXTRUSION STS 301 COIL F/L(R)
114
4260R-0052A
Arm
MOLD POM DECK/MECHA F/L (R) OT
011
4261R-0040A
Arm Assembly
DECK/MECHA TENSION - D37
017
4408R-0005A
Reel
MOLD KEPITAL F20-30 DECK/MECHA
017
4408R-0005B
Reel
MOLD POM DECK/MECHA S (VE) OTH
021
4421R-M002A
Brake Assembly
T - D37 DECK/MECHA IDLER(N) - D37
024
4261R-0042A
Arm Assembly
027
4470R-0133A
Gear
MOLD POM DECK/MECHA WHEEL OTHE
028
4408R-0006A
Reel
MOLD POM DECK/MECHA T OTHER -
051
4400R-0005A
Belt
MOLD RUBBER CAPSTAN
055
4470R-0140A
Gear
MOLD POM DECK/MECHA DRIVE OTHE
056
4470R-0139A
Gear
MOLD POM DECK/MECHA CAM OTHER
058
4421R-M001A
Brake Assembly
CAPSTAN -D37
061
4265R-0007A
Clutch Assembly
DECK/MECHA D37(N) MOLD POM DECK/MECHA SECTOR OTH
REMARKS
ALTERNATE
ALTERNATE
064
4470R-0141A
Gear
A12
4471R-0015A
Gear Assembly
DECK/MECHA P2 - D37
068
4470R-0134A
Gear
MOLD POM DECK/MECHA P2 OTHER -
NSP
069
4970R-0122A
Spring
EXTRUSION STS 301 COIL D35
NSP NSP
070
4261R-0043A
Arm Assembly
DECK/MECHA P2 - D37
A22
4471R-0016A
Gear Assembly
DECK/MECHA RACK F/L - D37
054
4470R-0136A
Gear
MOLD POM DECK/MECHA RACK F/L O
054A
4970R-0171A
Spring
EXTRUSION STS 301 COIL RACK F
A11
4471R-0017A
Gear Assembly
DECK/MECHA P3 - D37
065
4261R-0044A
Arm Assembly
DECK/MECHA P3 - D37
NSP
066
4970R-0122A
Spring
EXTRUSION STS 301 COIL D35
NSP
067
4470R-0135A
Gear
MOLD POM DECK/MECHA P3 OTHER -
NSP
060
4510R-0065A
Lever
MOLD POM DECK/MECHA F/R OTHER
076
4510R-0063A
Lever
PRESS SECC T0.5 DECK/MECHA SPR
078
4510R-0062A
Lever
PRESS SECC T0.5 DECK/MECHA TEN PRESS SECC T0.5 DECK/MECHA BRA
080
4510R-0064A
Lever
A24
4511R-0005A
Lever Assembly
SWITCH(C) - D37
115
4510R-0070A
Lever
MOLD POM DECK/MECHA SWITCH(C)
116
4970R-0163A
Spring
EXTRUSION STS 301 COIL D35S SW
003
4930R-0449A
Holder
MOLD POM DECK/MECHA FPCB(6CH)
026
4681RF0039A
Deck Mechanism Parts
- - MOTOR(ASSY) L/D - (DI) D37
NSP
026
4681RF0039C
Motor,Unclassified
DECK/MECHA L/D - (DI) D37
NSP
052
4680R-A015A
Motor,DC
F2QVB66 28V - 150MA - - - - 1M
052
4680R-A016A
Motor,DC
MCVC-037AA 28V - 150MA - - - -
052
4680R-A017A
Motor,DC
DMVCMC20L 28V - 150MA - - - -
ALTERNATE
052
4680R-A016B
Motor,DC
MCVC-037AB 28V - 150MA - - - -
ALTERNATE ALTERNATE
ALTERNATE
052
4680R-A015B
Motor,DC
F2QVB86 28V 0A 150MA 0RPM 0RPM
A21
4931R-0084A
Holder Assembly
DECK/MECHA CST - D37
102
4970R-0173A
Spring
EXTRUSION STS 301 COIL STOPPER
103
4930R-0452A
Holder
MOLD POM DECK/MECHA SIDE (L) O
NSP
105
4930R-0450A
Holder
MOLD POM DECK/MECHA CST OTHER
NSP
106
4930R-0451A
Holder
MOLD POM DECK/MECHA SIDE(R) OT
NSP
6 - 2
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
107
4510R-0061A
Lever
PRESS SECC T0.5 DECK/MECHA STO
004
5006R-0045A
Cap
MOLD POM DECK/MECHA FPCB - D3
008
6850R-HG18Y
Cable,FFC
1.25 x 7 x 170 x C(0.05 x 0.8)
015
5870R-0007A
Lever
DECK/MECHA LID OTHER - D37
022
6520D00004B
Magnetic Head
- ST ST FE HEAD FOR D37 13.5
022
6520D00006A
Magnetic Head
HVFHP0055A HVFHP0055A FE HEAD
031
4970R-0175A
Spring
EXTRUSION STS 301 COIL TENSIO MOLD POM DECK/MECHA CAPSTAN OT
052A
4980R-0029A
Supporter
109
5870R-0008A
Lever
DECK/MECHA DOOR OTHER - D37
A01
6723R-0603E
Drum,Assembly
DECK/MECHA (9C6S) D37-6CH NTSC
REMARKS NSP
ALTERNATE
*** PCB Assembly,Power *** A47
EBR31380353
PCB Assembly,Power
RC 200 series D2A PAL LSI IN
BD101
0DRVH00060A
Diode,Bridge
GBL08L-5701E3-22 800V 1V 5UA 1
BD101
0DRDI00211A
Diode,Bridge
GBL408-01 800V 1V 500UA 4A GBL
ALTERNATE
BD101
EAH31952201
Diode,Bridge
GBL08TAIWAN 800V 1V 500UA 150A
ALTERNATE
624-088F
Capacitor,Film,DIP
435D 275V 104 K 100nF 10% 275V
C102
624-088F
Capacitor,Film,DIP
435D 275V 104 K 100nF 10% 275V
C103
0CE1570R610
Capacitor,AL,Radial
SHL4.0CC250VB150M 150uF 20% 25 CH UP050 F104Z-A-B Z 100nF -20
C101
C104
0CN1040K948
Capacitor,Ceramic,Axial
C105
0CQ1031Y519
Capacitor,Film,DIP
230S 2J 103 K 10nF 10% 630V MP
C106
624-087G
Radial Type Ceramic Capacitor
HIGH-VOL 68PF/1KV SMPS SAMHWA
C107
0CQ1521N409
Capacitor,Film,DIP
HPE 2A 152J TP 1.5nF 5% 100V P
C109
0CE3366J618
Capacitor,AL,Radial
SMS5.0TP35VB33M 33uF 20% 35V 1
C110
0CG1020U630
Capacitor,Ceramic,Radial
1000PF D 400V 20% E(Z5U) R
C111
0CG1020U630
Capacitor,Ceramic,Radial
1000PF D 400V 20% E(Z5U) R
C115
0CQ2222K409
Capacitor,Film,DIP
310M 1H 222 J 2.2nF 5% 50V PE
C122
0CE108EH610
Capacitor,AL,Radial
KMG4.0CC25VB1000M 1000uF 20% 2
C123
0CE2282F611
Capacitor,AL,Radial
KMF4.0CC16VB2200M 2200uF 20% 1
C124
0CE108EH610
Capacitor,AL,Radial
KMG4.0CC25VB1000M 1000uF 20% 2
C126
624-085D
Capacitor,AL,Radial
KME5.0TP50VB47M 47uF 20% 50V 1
C127
0CE228ED610
Capacitor,AL,Radial
RD1A228M10020SS 2200uF 20% 10V
C128
0CE228BF630
Capacitor,AL,Radial
KME5.0MC16VB2200M 2200uF 20% 1
C132
624-082G
Capacitor,AL,Radial
SHL5.0TP25VB470M 470uF 20% 25V
C133
624-082H
Capacitor,AL,Radial
SHL5.0TP10VB1000M 1000uF 20% 1
C137
624-082H
Capacitor,AL,Radial
SHL5.0TP10VB1000M 1000uF 20% 1
C143
0CQ1042K409
Capacitor,Film,DIP
310M 1H 104 J 100nF 5% 50V PE
C152
0CE2274C638
Capacitor,AL,Radial
ESS227M6R3T1A5E07G 220uF 20% 6
C154
0CE2274C638
Capacitor,AL,Radial
ESS227M6R3T1A5E07G 220uF 20% 6
C155
0CE1074F638
Capacitor,AL,Radial
SRA5.0TP16VB100M 100uF 20% 16V
C156
0CE1074F638
Capacitor,AL,Radial
SRA5.0TP16VB100M 100uF 20% 16V
C158
624-087D
Radial Type Ceramic Capacitor
HI-VOL 470P/1KVDC SMPS SAMHWA
D101
0DRRE00163A
Diode,Rectifier
1F7 1KV 1.3V 5UA 25A 500NSEC R
D102
0DR104009BA
Diode,Rectifier
RL104F 400V 1.3V 5UA 30A 150NS
D122
0DSDI00110A
Diode,Rectifier
UF3003 200V 1V 5UA 150A 50NSEC
D122
EAH31951401
Diode,Switching
HER303 1.7V 200V 3A 150A 200US
D123
0DSKE00141B
Diode,Schottky
B5A60VI 550MV 60V 5A 35NSEC -
D123
0DSNH00020B
Diode,Switching
FSQ05A06 60V 5V 7.85A 110A 1NS
D124
0DSDI00110A
Diode,Rectifier
UF3003 200V 1V 5UA 150A 50NSEC
D124
EAH31951401
Diode,Switching
HER303 1.7V 200V 3A 150A 200US
D126
0DD010009AC
Diode,Rectifier
EU01W(R-FORM) 400V 2.5V 10UA 1
D127
0DR158220AA
Diode,Schottky
1N5822 950MV 40V 3A 1NSEC 250p
D128
0DSKE00141B
Diode,Schottky
B5A60VI 550MV 60V 5A 35NSEC -
D128
0DSNH00020B
Diode,Switching
FSQ05A06 60V 5V 7.85A 110A 1NS
D132
0DR104009AB
Diode,Rectifier
RL104R 400V 1.1V 5UA 30A 1NSEC
D133
0DR104009AB
Diode,Rectifier
RL104R 400V 1.1V 5UA 30A 1NSEC
D152
0DD133009AA
Diode,Switching
1SS133 1.2V 90V 400MA 600MA 4N
D153
0DD133009AA
Diode,Switching
1SS133 1.2V 90V 400MA 600MA 4N
6 - 3
ALTERNATE ALTERNATE ALTERNATE
ALTERNATE
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
F101
0FS1601B51D
Fuse,Time Delay
0218 01.6 GLASS 250V 1600MA KS
FH01
586-008B
Holder
COMPLEX audio ht302sd -
FH02
586-008B
Holder
COMPLEX audio ht302sd -
IC101
0IPMG78398A
IC,DC,DC Converter
STR-W6251 8TO17.1V 15V 500MW T
IC102
657-063A
Sensor,Position
LTV-817B 5V DIP BK PHOTO COUPL
IC103
0IKE431000A
IC,Voltage Regulator
KIA431 36V 36V 700MW TO92 TP 3
IC103
0ISS431000A
IC,Voltage Regulator
KA431AZ 2.495TO36V 36V 770MW T
ALTERNATE
IC103
0IPMGUC004B
IC,LDO Voltage Regulator
TL431 MAX12V 3.3V - TO92 TP 3P
ALTERNATE
IC153
0IPMGGM002A
IC,LDO Voltage Regulator
G9133 3.6TO7V 3.3V - TO220F ST
IC154
0IPMGKE050A
IC,LDO Voltage Regulator
KIA78R25PI-CU 3.2TO10V 2.5V 1.
IC154
0IPMGGM001A
IC,LDO Voltage Regulator
G9125 3.6TO7V 2.5V - TO220F ST
IC155
0IKE781200S
IC,LDO Voltage Regulator
KIA78R12PI-CU 13TO29V 12V 1.5W
IC155
0IPMGFA017A
IC,LDO Voltage Regulator
KA78R12TSTU 13TO29V 12V 1.5W T
IC156
0IPMGFA006C
IC,LDO Voltage Regulator
KA378R05TSTU 6TO12V 5V 15W TO2
IC156
0IPMGKE053B
IC,LDO Voltage Regulator
KIA378R05PI-CU 6TO12V 5V 1.5W
L102
6200JB8013R
Filter,Line Noise
SQ2626 25MH 27X21X33MM CAP SMD
L122
633-088G
Coil,Choke
22KS 22uH - - 8X17MM LEAD -
L123
6140RCC003H
Coil,RF
22uH 5V 0A 8X8MM LEAD -
L127
6140RCC003H
Coil,RF
22uH 5V 0A 8X8MM LEAD -
PSF01
561-661B
Connector,Wafer
99990986 2P 2.50MM 1R STRAIGHT SMW200-04P 4P 2.00MM 1R STRAIG
PSL01
6630VK20604
Connector,Wafer
PSV01
6630R-BF03N
Connector,BtoB
JE121-14 14P 2.54MM ANGLE FEMA
PW101
EAG35192701
Socket,Power
ST-02G-EABP 2P ANGLE DIP TR AC
R100
0RD1504H632
Resistor,Carbon Film
RD-92F3J1M50 1.5MOHM 5% 1/2W 9
R101
614-007A
Resistor,Cement
SQM2BJ2.7 2.7OHM 5% 2W 11.5X8X
R104
0RS1003K619
Resistor,Metal Oxide Film
SMR02R1J100K 100KOHM 5% 2W 8.6
R105
0RD0102F608
Resistor,Carbon Film
RD-96S1J10R0 10OHM 5% 1/6W 3.2
R109
0RS0350K619
Resistor,Metal Oxide Film
SMR02R1JR350 0.35OHM 5% 2W 8.6
R126
0RD1003F608
Resistor,Carbon Film
RD-96S1J100K 100KOHM 5% 1/6W 3
R141
0RD2200F608
Resistor,Carbon Film
RD-96S1J220R 220OHM 5% 1/6W 3.
R142
0RD2201F608
Resistor,Carbon Film
RD-96S1J2K20 2.2KOHM 5% 1/6W 3
R143
0RD1001F608
Resistor,Carbon Film
RD-96S1J1K00 1KOHM 5% 1/6W 3.2
R144
0RN3301F408
Resistor,Metal Film
RN-96S1F3K30 3.3KOHM 1% 1/6W 3
R145
0RN2701F408
Resistor,Metal Film
RN-96S1F2K70 2.7KOHM 1% 1/6W 3
R146
0RD1500F608
Resistor,Carbon Film
RD-96S1J150R 150OHM 5% 1/6W 3.
R153
0RD4701F608
Resistor,Carbon Film
RD-96S1J4K70 4.7KOHM 5% 1/6W 3
R154
0RD4701F608
Resistor,Carbon Film
RD-96S1J4K70 4.7KOHM 5% 1/6W 3
R155
0RD4701F608
Resistor,Carbon Film
RD-96S1J4K70 4.7KOHM 5% 1/6W 3
R156
0RD4701F608
Resistor,Carbon Film
RD-96S1J4K70 4.7KOHM 5% 1/6W 3
R158
0RD0222F608
Resistor,Carbon Film
RD-96S1J22R0 22OHM 5% 1/6W 3.2
R160
0RS1000K619
Resistor,Metal Oxide Film
SML02R0J100R 100OHM 5% 2W 8.6X
R177
0RD1002F608
Resistor,Carbon Film
RD-96S1J10K0 10KOHM 5% 1/6W 3.
T101
6170RNGW23S
Transformer,Switching
EER3530 18P FOR RC200 EER3530
V101
656-004C
Varistor
SVC681D-10A 680V 10% 250pF 10M
ZD101
0DZ330009CA
Diode,Zener
MTZJT-7733B 33V 30.32TO31.88V
ZD103
0DZ100009HA
Diode,Zener
UZ-10BM 10V 9.6TO10.4V 15OHM 5
*** Deck Assembly,DVD *** A60
EAZ35374011
Deck Assembly,DVD
DECK/MECHA RS-02A, MD(DR-10A)+
1030
6850R-EA78Z
Cable,FFC
P=0.5 FFC UL2896 SPECIAL 78 D-
1046
5040H-1074D
Damper
CUTTING RUBBER JW1 GWA-4083B
1431
1SZZR-0098G
Screw,Customized
1SZZR-0098G FH + 3MM 8MM MSWR
1439
1SZZH-1007B
Screw,Customized
+ D2.0 6MM SWRCH16A/ZNBK 4MM 1
A001
ACQ31161403
Cover Assembly
DECK/MECHA DR10, RS-02 TOP Mec
1001
MCK30125801
Cover
PRESS SECC 0.6 DECK/MECHA RS-0
1002
MCK32550502
Cover
PRESS SECC 0.6 DECK/MECHA for
1003
4861R-0021B
Clamp Assembly
DECK/MECHA DR-09 (RS-01A) DI
A002
EAZ34934812
Deck Assembly
DECK/MECHA DR-10A Mecha total
6 - 4
REMARKS
ALTERNATE ALTERNATE ALTERNATE
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
1011
MAM30122601
Base
MOLD LUPOS GP-2100 RS-01 (DR-0
1012
4974R-0082A
Guide
MOLD POM HOME ALL MOLD DECK
1013
MDT30123101
Gear
MOLD LUCEL N109-LD DECK/MECHA
1014
MFC30123901
Lever
MOLD LUCEL N109-LD DECK/MECHA
1015
4400H-1014A
Belt
MOLD RUBBER LOADING NM
1016
MGN30124101
Pulley
MOLD LUCEL N109-LD DECK/MECHA
1017
MDT30122801
Gear
MOLD LUCEL N109-LD DECK/MECHA
1018
4680R-E009A
Motor,DC
RF300EH-1D390 2V 90MA 25MA 1.3
1019
4560H-1005A
Pulley
MOLD POM F20.03 AAA ALL 1
1025
5040H-1104C
Damper
CUTTING RUBBER REAR NM(DVDW)
1036
4680HP5025C
Motor,DC
SPS-15RF-172KPA 5V 0A 350MA 0R
1038
MEG30124201
Holder
MOLD LUCEL N109-LD DECK/MECHA
1041
5040H-1103C
Damper
CUTTING RUBBER FRONT NM(DVDW)
1432
1SZZH-1072D
Screw,Customized
PH + 2MM 4.5MM SWRCH FZW SIN
1433
1SZZR-0075A
Screw,Customized
- + 1.7MM 10MM SWRCH FZW SIN
1437
1SZZH-1003E
Screw,Customized
PWH + 2MM 13MM SWRCH NIY SIN
A005
6871R-0P54E
PCB Assembly
6871R-0P54B RS-01 ci FRONT, IN
1043
6600HXF102A
Switch,Detector
MPU20160MLB0 2C1P 5VDC 0.7MA V
1043
6600KW3004C
Switch,Micro
SW2AB-254-10 2C2P 5VDC 0.01A H
1045
EAD32990301
Cable,FFC
AT10007100G01 100MM 1.00MM 7P
1020
MAM32550301
Base
MOLD LUMAX GN-5006F [DR10 MOLD
1026
MJS32550401
Tray
MOLD LUMAX GN-5006F DECK/MECHA
LAR263
0RRZVTA001F
Resistor,Array
RCA86TRJ33R0 33OHM 5% 1/16W 4
LAR271
0RRZVTA001F
Resistor,Array
RCA86TRJ33R0 33OHM 5% 1/16W 4
LAR272
0RRZVTA001F
Resistor,Array
RCA86TRJ33R0 33OHM 5% 1/16W 4
LAR273
0RRZVTA001F
Resistor,Array
RCA86TRJ33R0 33OHM 5% 1/16W 4
LAR274
0RRZVTA001F
Resistor,Array
RCA86TRJ33R0 33OHM 5% 1/16W 4
LAR275
0RRZVTA001V
Resistor,Array
RCA86TRJ82R0 82OHM 5% 1/16W 4
LAR276
0RRZVTA0014
Resistor,Array
RCA86TRJ10K0 10KOHM 5% 1/16W 4
LC110
0CK475DC6CA
Capacitor,Ceramic,Chip
C2012JB0J475MT 4.7uF 20% 6.3V
LC121
0CK105CC56A
Capacitor,Ceramic,Chip
0603B105K6R3CT 1uF 10% 6.3V X7 0603N221J500LT 220pF 5% 50V C0
LC122
0CH4221K412
Capacitor,Ceramic,Chip
LC123
0CH4331K412
Capacitor,Ceramic,Chip
0603N331J500LT 330pF 5% 50V C0
LC124
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC125
0CK475DC6CA
Capacitor,Ceramic,Chip
C2012JB0J475MT 4.7uF 20% 6.3V
LC126
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC127
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC129
0CK105CC56A
Capacitor,Ceramic,Chip
0603B105K6R3CT 1uF 10% 6.3V X7
LC138
0CH1153K562
Capacitor,Ceramic,Chip
CC0603KRX7R9BB153 15nF 10% 50V
LC142
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC145
0CH1223K562
Capacitor,Ceramic,Chip
0603B223K500CT 22nF 10% 50V X7
LC148
0CH1182K512
Capacitor,Ceramic,Chip
0603B182K500CT 1.8nF 10% 50V Y
LC152
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC155
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC156
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC157
0CK105CC56A
Capacitor,Ceramic,Chip
0603B105K6R3CT 1uF 10% 6.3V X7
LC158
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC162
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC164
0CH1332K562
Capacitor,Ceramic,Chip
0603B332K500CT 3.3nF 10% 50V X
LC170
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC171
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC172
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC201
0CK106EDD7A
Capacitor,Ceramic,Chip
LMK316JB106ML-T 10uF 20% 10V X
LC207
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC212
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC213
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC214
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
6 - 5
REMARKS
ALTERNATE
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
LC218
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC219
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC220
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC221
0CK124DH56A
Capacitor,Ceramic,Chip
0805B124K250CT 120nF 10% 25V X
LC222
0CK475DC6CA
Capacitor,Ceramic,Chip
C2012JB0J475MT 4.7uF 20% 6.3V
LC225
0CH1562K562
Capacitor,Ceramic,Chip
0603B562K500CT 5.6nF 10% 50V X
LC230
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC231
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC232
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC233
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC234
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC235
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC236
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC237
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC239
0CK105CC56A
Capacitor,Ceramic,Chip
0603B105K6R3CT 1uF 10% 6.3V X7
LC240
0CH1333K512
Capacitor,Ceramic,Chip
0603B333K500CT 33nF 10% 50V Y5
LC241
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC242
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC245
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC246
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC247
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC248
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC267
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC268
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC269
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC273
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC323
0CH4151K412
Capacitor,Ceramic,Chip
0603N151J500LT 150pF 5% 50V C0
LC324
0CH4331K412
Capacitor,Ceramic,Chip
0603N331J500LT 330pF 5% 50V C0
LC325
0CH4151K412
Capacitor,Ceramic,Chip
0603N151J500LT 150pF 5% 50V C0
LC326
0CH4151K412
Capacitor,Ceramic,Chip
0603N151J500LT 150pF 5% 50V C0
LC327
0CH4331K412
Capacitor,Ceramic,Chip
0603N331J500LT 330pF 5% 50V C0
LC401
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC402
0CS476HD6DC
Capacitor,TA,Niobium
TSM1A476TSSR 47uF 20% 10V 4.7U
LC414
0CH8107F621
Capacitor,AL,Chip
MV6.3TP16VC100M 100uF 20% 16V
LC415
0CH8107F621
Capacitor,AL,Chip
MV6.3TP16VC100M 100uF 20% 16V
LC520
0CH8107F621
Capacitor,AL,Chip
MV6.3TP16VC100M 100uF 20% 16V
LC522
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LD401
0DRTW00268A
Diode,Rectifier
RS1G 400V 1.3V 5UA 30A 150NSEC
LD403
0DRTW00268A
Diode,Rectifier
RS1G 400V 1.3V 5UA 30A 150NSEC
LIC262
0IMMRMR019F
IC,NOR Flash Memory
MX29LV160CBTC-70G 16MBIT 2MX8B
LPB271
EAG34275201
Connector,FFC/FPC/PIC
05010HR-40A00(G) 40P 0.50MM FF
LPB272
6630VK20704
Connector,Wafer
20037WR-04A00 4P 2.00MM 1R ANG
LPB273
6630R-FB06D
Connector,FFC/FPC/PIC
04-6232-104-102-800 4P 1.00MM
LPF303
6630X60074D
Connector,FFC/FPC/PIC
04-6232-107-111-801+ 7P 1.00MM
LPM101
6630HXE440E
Connector,FFC/FPC/PIC
04-6240-045-003-800 45P 0.50MM
LPM301
6630X60108A
Connector,FFC/FPC/PIC
04-6232-113-111-801 13P 1.00MM
LPM302
6630XE00204
Connector,FFC/FPC/PIC
04-6232-504-015-800 4P 1.00MM
LQ401
0TRAU80040A
TR,Bipolar
STB1132Y PNP -5V -40V -32V -1A
LR122
0RH3300C622
Resistor,Chip
MCR03EZPJ331 330OHM 5% 1/10W 1
LR123
0RH5600C622
Resistor,Chip
MCR03EZPJ561 560OHM 5% 1/10W 1
LR201
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LR204
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
LR212
0RH4702C622
Resistor,Chip
MCR03EZPJ473 47KOHM 5% 1/10W 1
LR213
0RJ3601C477
Resistor,Chip
MCR03EZPF362 3.6KOHM 1% 1/10W
LR224
0RH6800C622
Resistor,Chip
MCR03EZPJ681 680OHM 5% 1/10W 1
LR225
0RH1502C622
Resistor,Chip
MCR03EZPJ153 15KOHM 5% 1/10W 1
LR227
0RJ1501C477
Resistor,Chip
MCR03EZPF152 1.5KOHM 1% 1/10W
6 - 6
REMARKS
S AL LOCA. NO. PART NO. LR228
0RH6800C622
DESCRIPTION
SPECIFICATION
Resistor,Chip
MCR03EZPJ681 680OHM 5% 1/10W 1
LR229
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
LR230
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
LR233
0RJ5601C477
Resistor,Chip
MCR03EZPF562 5.6KOHM 1% 1/10W
LR236
0RJ0332C477
Resistor,Chip
MCR03EZPF330 33OHM 1% 1/10W 16 MCR03EZPF330 33OHM 1% 1/10W 16
LR237
0RJ0332C477
Resistor,Chip
LR248
0RH0822C622
Resistor,Chip
MCR03EZPJ820 82OHM 5% 1/10W 16
LR260
0RH4700C622
Resistor,Chip
MCR03EZPJ471 470OHM 5% 1/10W 1
LR261
0RH4700C622
Resistor,Chip
MCR03EZPJ471 470OHM 5% 1/10W 1
LR262
0RH4700C622
Resistor,Chip
MCR03EZPJ471 470OHM 5% 1/10W 1
LR266
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LR267
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LR273
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LR274
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LR275
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LR276
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LR279
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LR281
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LR282
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
LR283
0RH0822C622
Resistor,Chip
MCR03EZPJ820 82OHM 5% 1/10W 16
LR284
0RH0822C622
Resistor,Chip
MCR03EZPJ820 82OHM 5% 1/10W 16
LR285
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
LR286
0RH0822C622
Resistor,Chip
MCR03EZPJ820 82OHM 5% 1/10W 16
LR287
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
LR288
0RH0822C622
Resistor,Chip
MCR03EZPJ820 82OHM 5% 1/10W 16
LR296
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1 MCR03EZPF330 33OHM 1% 1/10W 16
LR298
0RJ0332C477
Resistor,Chip
LR301
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
LR302
0RH0221D622
Resistor,Chip
MCR10EZHJ2R2 2.2OHM 5% 1/8W 20
LR303
0RH0221D622
Resistor,Chip
MCR10EZHJ2R2 2.2OHM 5% 1/8W 20
LR304
0RH0221D622
Resistor,Chip
MCR10EZHJ2R2 2.2OHM 5% 1/8W 20
LR305
0RH0221D622
Resistor,Chip
MCR10EZHJ2R2 2.2OHM 5% 1/8W 20
LR306
0RH0221D622
Resistor,Chip
MCR10EZHJ2R2 2.2OHM 5% 1/8W 20
LR307
0RH0221D622
Resistor,Chip
MCR10EZHJ2R2 2.2OHM 5% 1/8W 20
LR308
0RH0221D622
Resistor,Chip
MCR10EZHJ2R2 2.2OHM 5% 1/8W 20
LR401
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
LR402
0RH1002C422
Resistor,Chip
MCR03EZPF103 10KOHM 1% 1/10W 1
LR522
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LR523
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LAR106
0RRZVTA0018
Resistor,Array
EBC01520101 47OHM 5% 1/16W 4 S
LAR107
0RRZVTA0018
Resistor,Array
EBC01520101 47OHM 5% 1/16W 4 S
LAR261
0RRZVTA0014
Resistor,Array
RCA86TRJ10K0 10KOHM 5% 1/16W 4 0603F104Z500CT 100nF -20TO+80%
LC102
0CH1104K942
Capacitor,Ceramic,Chip
LC103
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC104
0CK106FF94A
Capacitor,Ceramic,Chip
CC1210ZKY5V7BB106 10uF -20TO+8
LC105
0CK106FF94A
Capacitor,Ceramic,Chip
CC1210ZKY5V7BB106 10uF -20TO+8
LC107
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC108
0CK105CC56A
Capacitor,Ceramic,Chip
0603B105K6R3CT 1uF 10% 6.3V X7
LC116
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC117
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC118
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC120
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC128
0CK105CC56A
Capacitor,Ceramic,Chip
0603B105K6R3CT 1uF 10% 6.3V X7
LC132
0CK105CC56A
Capacitor,Ceramic,Chip
0603B105K6R3CT 1uF 10% 6.3V X7
LC133
0CK105CC56A
Capacitor,Ceramic,Chip
0603B105K6R3CT 1uF 10% 6.3V X7
LC134
0CH1153K562
Capacitor,Ceramic,Chip
CC0603KRX7R9BB153 15nF 10% 50V
LC135
0CH4331K412
Capacitor,Ceramic,Chip
0603N331J500LT 330pF 5% 50V C0
6 - 7
REMARKS
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
LC136
0CH1153K562
Capacitor,Ceramic,Chip
CC0603KRX7R9BB153 15nF 10% 50V
LC137
0CH4331K412
Capacitor,Ceramic,Chip
0603N331J500LT 330pF 5% 50V C0
LC139
0CH4331K412
Capacitor,Ceramic,Chip
0603N331J500LT 330pF 5% 50V C0
LC140
0CH1153K562
Capacitor,Ceramic,Chip
CC0603KRX7R9BB153 15nF 10% 50V
LC141
0CH1182K512
Capacitor,Ceramic,Chip
0603B182K500CT 1.8nF 10% 50V Y
LC143
0CH1182K512
Capacitor,Ceramic,Chip
0603B182K500CT 1.8nF 10% 50V Y
LC144
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC146
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC149
0CH4271K412
Capacitor,Ceramic,Chip
C1608C0G1H271JT 270pF 5% 50V C
LC150
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC151
0CH4392K412
Capacitor,Ceramic,Chip
C1608C0G1H392JT 3.9nF 5% 50V C
LC153
0CH4681K412
Capacitor,Ceramic,Chip
0603N681J500LT 680pF 5% 50V C0
LC154
0CK105CC56A
Capacitor,Ceramic,Chip
0603B105K6R3CT 1uF 10% 6.3V X7
LC159
0CH1822K562
Capacitor,Ceramic,Chip
0603B822K500CT 8.2nF 10% 50V X
LC161
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC163
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC165
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC175
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC223
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
LC224
0CH1563K516
Capacitor,Ceramic,Chip
C2012X7R1H563KT 56nF 10% 50V X
LC226
0CH1823F562
Capacitor,Ceramic,Chip
0603B823K160CT 82nF 10% 16V X7
LC228
0CH1822K562
Capacitor,Ceramic,Chip
0603B822K500CT 8.2nF 10% 50V X
LC238
0CK105CC56A
Capacitor,Ceramic,Chip
0603B105K6R3CT 1uF 10% 6.3V X7
LC255
0CH4220K412
Capacitor,Ceramic,Chip
0603N220J500LT 22pF 5% 50V C0G
LC261
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC262
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC263
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC264
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC266
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC271
0CH4330K412
Capacitor,Ceramic,Chip
0603N330J500LT 33pF 5% 50V C0G
LC303
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
LC304
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
LC305
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
LC306
0CK106FF94A
Capacitor,Ceramic,Chip
CC1210ZKY5V7BB106 10uF -20TO+8
LC307
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC308
0CH4271K412
Capacitor,Ceramic,Chip
C1608C0G1H271JT 270pF 5% 50V C
LC309
0CH4471K412
Capacitor,Ceramic,Chip
0603N471J500LT 470pF 5% 50V C0
LC310
0CH4101K412
Capacitor,Ceramic,Chip
0603N101J500LT 100pF 5% 50V C0
LC311
0CH1474K562
Capacitor,Ceramic,Chip
CS1608XR474K100NR 470nF 10% 10
LC313
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC315
0CK106FF94A
Capacitor,Ceramic,Chip
CC1210ZKY5V7BB106 10uF -20TO+8
LC317
0CH1821K562
Capacitor,Ceramic,Chip
0603B821K500CT 820pF 10% 50V X
LC318
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC319
0CH4391K412
Capacitor,Ceramic,Chip
0603N391J500LT 390pF 5% 50V C0
LC321
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC322
0CH4101K412
Capacitor,Ceramic,Chip
0603N101J500LT 100pF 5% 50V C0
LC328
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC333
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC335
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC336
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC337
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC352
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
LC353
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
LC354
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
LC360
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
LC361
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
LC362
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
6 - 8
REMARKS
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
LC388
0CH4221K412
Capacitor,Ceramic,Chip
0603N221J500LT 220pF 5% 50V C0
LC390
0CH4221K412
Capacitor,Ceramic,Chip
0603N221J500LT 220pF 5% 50V C0
LC391
0CH4391K412
Capacitor,Ceramic,Chip
0603N391J500LT 390pF 5% 50V C0
LC403
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC404
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC405
0CK106EDD7A
Capacitor,Ceramic,Chip
LMK316JB106ML-T 10uF 20% 10V X
LC406
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC508
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC510
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
LC515
0CK106EDD7A
Capacitor,Ceramic,Chip
LMK316JB106ML-T 10uF 20% 10V X
LD402
0DRTW00268A
Diode,Rectifier
RS1G 400V 1.3V 5UA 30A 150NSEC
LIC101
0ILNR00023A
IC,Video Processors
AN22138A-VT 1.8VTO3.3V - - - S AN22113A-VT 1.8VTO3.3V - - - T
REMARKS
LIC121
0ILNR00022A
IC,Video Processors
LIC201
0IMCR02031A
IC,Optical Disk Controller
MN103SA6GSJ 4.5TO5.5V 3.1TO3.5
LIC261
0IMMRHY001G
IC,SDRAM
HY57V161610ETCP-7 16MBIT 512KX
LIC261
0IMMREB006C
IC,SDRAM
M12L16161A-7T 16MBIT 512KX16BI
ALTERNATE
LIC261
0IMMREO002A
IC,SDRAM
EM636165TS-7G 16MBIT 512KX16BI
ALTERNATE
LIC301
EAN33858701
IC,Motor Driver
AM9266 DVD-R 6ch pwm 7.5to13.2
LIC302
EAN33857101
IC,Motor Driver
AM9838 DVD-R 6ch 4.5to7v 0.85v
LL101
6140R-G006A
Coil
LEMC3225T100K SMD TAIYO TP
LL102
6140R-G006A
Coil
LEMC3225T100K SMD TAIYO TP
LL302
6200HJC106A
Filter,Bead
HH-1M2012-121JT 120OHM 2X1.25X
LL402
6200HJC106A
Filter,Bead
HH-1M2012-121JT 120OHM 2X1.25X
LL403
6200HJC106A
Filter,Bead
HH-1M2012-121JT 120OHM 2X1.25X
LQ402
0TRAU80039A
TR,Bipolar
STA723DG PNP -5V -40V -30V -3A
LR102
0RH1002C422
Resistor,Chip
MCR03EZPF103 10KOHM 1% 1/10W 1
LR113
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LR114
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LR116
0RH2202C622
Resistor,Chip
MCR03EZPJ223 22KOHM 5% 1/10W 1
LR117
0RH2202C622
Resistor,Chip
MCR03EZPJ223 22KOHM 5% 1/10W 1
LR155
0RH1202C422
Resistor,Chip
MCR03EZPF123 12KOHM 1% 1/10W 1
LR207
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1 MCR03EZPJ102 1KOHM 5% 1/10W 16
LR210
0RH1001C622
Resistor,Chip
LR218
0RH8201C622
Resistor,Chip
MCR03EZPJ822 8.2KOHM 5% 1/10W
LR221
0RJ1004C677
Resistor,Chip
MCR03EZPJ105 1MOHM 5% 1/10W 16 MCR03EZPJ103 10KOHM 5% 1/10W 1
LR222
0RH1002C622
Resistor,Chip
LR231
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
LR250
0RH4700C622
Resistor,Chip
MCR03EZPJ471 470OHM 5% 1/10W 1
LR265
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LR291
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LR295
0RH2202C622
Resistor,Chip
MCR03EZPJ223 22KOHM 5% 1/10W 1
LR310
0RH1802C422
Resistor,Chip
MCR03EZPF183 18KOHM 1% 1/10W 1
LR312
0RH4701C422
Resistor,Chip
MCR03EZPF472 4.7KOHM 1% 1/10W
LR313
0RJ5601C477
Resistor,Chip
MCR03EZPF562 5.6KOHM 1% 1/10W
LR316
0RH1802C422
Resistor,Chip
MCR03EZPF183 18KOHM 1% 1/10W 1
LR317
0RH1802C422
Resistor,Chip
MCR03EZPF183 18KOHM 1% 1/10W 1
LR319
0RH0181D622
Resistor,Chip
MCR10EZHJ1R8 1.8OHM 5% 1/8W 20
LR320
0RH0181D622
Resistor,Chip
MCR10EZHJ1R8 1.8OHM 5% 1/8W 20
LR322
0RH0181D622
Resistor,Chip
MCR10EZHJ1R8 1.8OHM 5% 1/8W 20
LR323
0RH0181D622
Resistor,Chip
MCR10EZHJ1R8 1.8OHM 5% 1/8W 20 MCR03EZPF333 33KOHM 1% 1/10W 1
LR340
0RH3302C422
Resistor,Chip
LR341
0RH4701C422
Resistor,Chip
MCR03EZPF472 4.7KOHM 1% 1/10W
LR343
0RH2002C422
Resistor,Chip
MCR03EZPF203 20KOHM 1% 1/10W 1
LR345
0RH8200C622
Resistor,Chip
MCR03EZPJ821 820OHM 5% 1/10W 1
LR365
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
LR368
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
LR369
0RH4700C622
Resistor,Chip
MCR03EZPJ471 470OHM 5% 1/10W 1
6 - 9
S AL LOCA. NO. PART NO. LR380
0RH0000C622
DESCRIPTION
SPECIFICATION
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
LR381
0RH1102C422
Resistor,Chip
MCR03EZPF113 11KOHM 1% 1/10W 1
LR383
0RH9100C622
Resistor,Chip
MCR03EZPJ911 910OHM 5% 1/10W 1
LR385
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
LR386
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
LR387
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
LR388
0RH1002C422
Resistor,Chip
MCR03EZPF103 10KOHM 1% 1/10W 1
LR389
0RH3302C422
Resistor,Chip
MCR03EZPF333 33KOHM 1% 1/10W 1
LR391
0RH9100C622
Resistor,Chip
MCR03EZPJ911 910OHM 5% 1/10W 1
LR392
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
LR511
0RH0472C622
Resistor,Chip
MCR03EZPJ470 47OHM 5% 1/10W 16
LX201
6212BB3241A
Resonator,Ceramic
CSTCE16M9V53-R0 16.934MHZ 0.5%
REMARKS
*** PCB Assembly,Timer/Key *** A50
EBR32207451
PCB Assembly,Timer/Key
07 R-COMBI 8/9TOOL KEY IN
LD602
0DL112000AJ
Optic Element,Unclassified
DL-11S2RNS(SUPER,RED,03)KOC
LD602
0DLAU0239AA
LED,DIP
SA3417 ROUND 3MM RED RED TRANS
LD603
0DL112000AJ
Optic Element,Unclassified
DL-11S2RNS(SUPER,RED,03)KOC
LD603
0DLAU0239AA
LED,DIP
SA3417 ROUND 3MM RED RED TRANS
P6V01
561-712F
Connector,Wafer
GIL-S-06P-S2L2-EF 6P 2.00MM 1R
Q601
0TR534309BA
TR,Bipolar
2SC5343L NPN 5V 60V 50V 150MA
Q602
0TR534309BA
TR,Bipolar
2SC5343L NPN 5V 60V 50V 150MA
R601
0RD6800F608
Resistor,Carbon Film
RD-96S1J680R 680OHM 5% 1/6W 3.
R602
0RD8200F608
Resistor,Carbon Film
RD-96S1J820R 820OHM 5% 1/6W 3.
R603
0RD1201F608
Resistor,Carbon Film
RD-96S1J1K20 1.2KOHM 5% 1/6W 3
R604
0RD1501F608
Resistor,Carbon Film
RD-96S1J1K50 1.5KOHM 5% 1/6W 3
R605
0RD2201F608
Resistor,Carbon Film
RD-96S1J2K20 2.2KOHM 5% 1/6W 3
R606
0RD3301F608
Resistor,Carbon Film
RD-96S1J3K30 3.3KOHM 5% 1/6W 3
R607
0RD2200F608
Resistor,Carbon Film
RD-96S1J220R 220OHM 5% 1/6W 3.
R609
0RD1001F608
Resistor,Carbon Film
RD-96S1J1K00 1KOHM 5% 1/6W 3.2
R610
0RD1001F608
Resistor,Carbon Film
RD-96S1J1K00 1KOHM 5% 1/6W 3.2
R611
0RD2200F608
Resistor,Carbon Film
RD-96S1J220R 220OHM 5% 1/6W 3.
SW601
556-219B
Switch,Tact
THVV502GAA 1C1P 12VDC 0.05A HO
SW602
556-219B
Switch,Tact
THVV502GAA 1C1P 12VDC 0.05A HO
SW603
556-219B
Switch,Tact
THVV502GAA 1C1P 12VDC 0.05A HO
SW604
556-219B
Switch,Tact
THVV502GAA 1C1P 12VDC 0.05A HO
SW605
556-219B
Switch,Tact
THVV502GAA 1C1P 12VDC 0.05A HO
SW606
556-219B
Switch,Tact
THVV502GAA 1C1P 12VDC 0.05A HO
SW607
556-219B
Switch,Tact
THVV502GAA 1C1P 12VDC 0.05A HO
SW608
556-219B
Switch,Tact
THVV502GAA 1C1P 12VDC 0.05A HO VCR RC297H-M.NA1ULLB VCR MAIN
ALTERNATE ALTERNATE
*** Board Assembly *** A46
AAX32868001
Board Assembly
323
3111R-0089E
Case Assembly
SLIM COMBI PRE AMP ASSY
CABLE8
EAD35829001
Harness,Single
6P 60MM TJC19-6Y TJC19-6Y 60mm MPU12970MLB0 VCR CST IN S/W MI
CS501
6600M000026
Switch,Push Button
DIS501
6301R2U017N
LED Assembly
TOS-283AEGMGMY-B LED CLOCK OAS
ES501
4931R-0085C
Holder Assembly
VCR DECK/MECHA END(S)
ES502
4931R-0085C
Holder Assembly
VCR DECK/MECHA END(S)
IC301
0ILNRHI009B
Video IC
HA118725ANF-E PB-FREE HITACHI
IC501
EAN35443103
IC,Microcontrollers
MN101D10F GN 4.0V TO 5.5V 20mA
IC503
0ICS241600B
IC,EEPROM
CAT24WC16L 16KBIT 2KX8BIT 2.5V
JK801
6612J00053A
Jack,RCA
DPAE-0385 15MM 1RX3C ANGLE TR
JK804
EAG35130901
Connector,USB
U250FD004S106BY A 1P 2.00/2.50
JK805
EAG35131501
Connector,USB
Z080FD004S100BY IEEE1394 1P NO
JK901
EAG34640001
Jack,Complex
RCA/DIN-708A-01-01 7P RCA,DIN
JK902
6612K00003B
Jack,Fiber Optic
PLT133/T5B 3P TX 2.54MM ANGLE
JK902
6612K00003D
Jack,Fiber Optic
JST1164 3P TX 2.54MM ANGLE 13.
JK905
EAG34637801
Jack,RCA
RCA-643A-00-01 15MM 2RX3C ANGL
6 - 10
ALTERNATE
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
JK905
EAG34637802
Jack,RCA
RCA-643B-00-01 15MM 2RX3C ANGL
JK906
6612F00007A
Jack,Phone
PJ-308-01 1P 2P ANGLE TR 3.6MM VCR RC278-P1 -
LD501
4931R-0089C
Holder Assembly
MS501
6600JR3002D
Switch,Lever
SSS-51MD-5 1C1P 5VDC 0.01A HOR
MS501
6600JR3002E
Switch,Micro
MMS01080ZMBO 1C2P 5VDC 1MA VER
P3D01
561-234S
Connector,FFC/FPC/PIC
GF120-09S-TS 9P 1.25MM FFC/FPC
P3D02
6630R5S008J
Connector,FFC/FPC/PIC
06(11)FM22.5H-BTR-SH (LF)(SN)
P3D03
561-251B
Connector,BtoB
GB201-02P-TS-B 2P 2.00MM STRAI
PHM01
EAG33399501
Connector,BtoB
20045WS-12B1 12P 2.0MM STRAIGH
PMC01
6630BK01612
Connector,BtoB
JE612-A2T-12A 12P 2.00MM STRAI
PV601
561-711F
Connector,Wafer
GIL-S-06P-S2T2-EF 6P 2.00MM 1R
PVM01
EAG33399502
Connector,BtoB
20045WS-30B1 30P 2.0MM STRAIGH
PVM02
EAG33399502
Connector,BtoB
20045WS-30B1 30P 2.0MM STRAIGH
PVS01
6630B00141B
Connector,BtoB
JE117-D28T-14 14P 2.54MM STRAI
RM501
EAV35564001
Receiver Module
546HF 0 TO 6V 5MA 38KHZ 950NM
RS501
6500RAB008A
Sensor,Position
KIT-3001A 5V DIP BK REEL 4 PIN
RS502
6500RAB008A
Sensor,Position
KIT-3001A 5V DIP BK REEL 4 PIN
SW503
EBF32615603
Switch,Tact
JTP1243 1C4P 5VDC 0.01A HORIZO
X502
6202R-DA01B
Crystal
CFS-308 32.768KHZ 20PPM 32.768
C301
0CE4764C638
Capacitor,AL,Radial
ESS476M6R3T1A5C07G 47uF 20% 6.
C303
0CE3344K638
Capacitor,AL,Radial
ESS334M050T1A5C07G 330nF 20% 5
C305
0CE4754K638
Capacitor,AL,Radial
ESS475M050T1A5B07G 4.7uF 20% 5
C308
0CE4754K638
Capacitor,AL,Radial
ESS475M050T1A5B07G 4.7uF 20% 5
C309
0CE2264F638
Capacitor,AL,Radial
ESS226M016T1A5B07G 22uF 20% 16 ESS226M016T1A5B07G 22uF 20% 16
C310
0CE2264F638
Capacitor,AL,Radial
C313
0CQ2231N409
Capacitor,Film,DIP
310M 2A 223 J 22nF 5% 100V PE
C314
0CE4764F638
Capacitor,AL,Radial
ESS476M016T1A5C07G 47uF 20% 16
C317
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C319
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C327
0CE2254K638
Capacitor,AL,Radial
ESS225M050T1A5B07G 2.2uF 20% 5
C328
0CE4764C638
Capacitor,AL,Radial
ESS476M6R3T1A5C07G 47uF 20% 6. ESS105M050T1A5B07G 1uF 20% 50V
C329
0CE1054K638
Capacitor,AL,Radial
C331
0CE1053K638
Capacitor,AL,Radial
SRE5.0TP50VB1M 1uF 20% 50V 6.2
C337
0CE1043K638
Capacitor,AL,Radial
SRE5.0TP50VB0.1M 100nF 20% 50V
C339
0CE3354K638
Capacitor,AL,Radial
ESS335M050T1A5B07G 3.3uF 20% 5
C340
0CE1063F638
Capacitor,AL,Radial
ESF106M016T1A5B05G 10uF 20% 16
C343
0CE4764C638
Capacitor,AL,Radial
ESS476M6R3T1A5C07G 47uF 20% 6.
C349
0CC0500K015
Capacitor,Ceramic,Radial
DD1HCH050C749 5pF 0.25PF 50V C
C350
0CE4764C638
Capacitor,AL,Radial
ESS476M6R3T1A5C07G 47uF 20% 6.
C353
0CE3354K638
Capacitor,AL,Radial
ESS335M050T1A5B07G 3.3uF 20% 5
C355
0CE2254K638
Capacitor,AL,Radial
ESS225M050T1A5B07G 2.2uF 20% 5
C358
0CE1054K638
Capacitor,AL,Radial
ESS105M050T1A5B07G 1uF 20% 50V
C359
0CE4754K638
Capacitor,AL,Radial
ESS475M050T1A5B07G 4.7uF 20% 5
C361
0CE1053K638
Capacitor,AL,Radial
SRE5.0TP50VB1M 1uF 20% 50V 6.2
C366
0CE4764C638
Capacitor,AL,Radial
ESS476M6R3T1A5C07G 47uF 20% 6.
C468
0CE4763C638
Capacitor,AL,Radial
SRE5.0TP6.3VB47M 47uF 20% 6.3V
C470
0CE1063F638
Capacitor,AL,Radial
ESF106M016T1A5B05G 10uF 20% 16
C474
0CE4763C638
Capacitor,AL,Radial
SRE5.0TP6.3VB47M 47uF 20% 6.3V
C492
0CE4763C638
Capacitor,AL,Radial
SRE5.0TP6.3VB47M 47uF 20% 6.3V
C493
0CE1063F638
Capacitor,AL,Radial
ESF106M016T1A5B05G 10uF 20% 16
C502
0CE4764H638
Capacitor,AL,Radial
ESS476M025T1A5E07G 47uF 20% 25
C507
0CE4764H638
Capacitor,AL,Radial
ESS476M025T1A5E07G 47uF 20% 25
C515
0CE4754K638
Capacitor,AL,Radial
ESS475M050T1A5B07G 4.7uF 20% 5
C521
0CE4764C638
Capacitor,AL,Radial
ESS476M6R3T1A5C07G 47uF 20% 6.
C524
0CE4775C638
Capacitor,AL,Radial
470UF SR,SV 6.3V 20% FM5 TP 5
C533
0CE1086C638
Capacitor,AL,Radial
SMS5.0TP6.3VB1000M 1000uF 20%
C534
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
6 - 11
REMARKS ALTERNATE
ALTERNATE
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
0CE4764C638
Capacitor,AL,Radial
ESS476M6R3T1A5C07G 47uF 20% 6.
C544
0CE1053K638
Capacitor,AL,Radial
SRE5.0TP50VB1M 1uF 20% 50V 6.2
C546
0CE3364F638
Capacitor,AL,Radial
ESS336M016T1A5E07G 33uF 20% 16 ESS106M016T1A5B07G 10uF 20% 16
C542
C547
0CE1064F638
Capacitor,AL,Radial
C554
0CE2264F638
Capacitor,AL,Radial
ESS226M016T1A5B07G 22uF 20% 16
C555
0CE2264F638
Capacitor,AL,Radial
ESS226M016T1A5B07G 22uF 20% 16
C556
0CE1074F638
Capacitor,AL,Radial
SRA5.0TP16VB100M 100uF 20% 16V
C654
0CE2274C638
Capacitor,AL,Radial
ESS227M6R3T1A5E07G 220uF 20% 6
C672
0CE2274C638
Capacitor,AL,Radial
ESS227M6R3T1A5E07G 220uF 20% 6
C681
0CE4764C638
Capacitor,AL,Radial
ESS476M6R3T1A5C07G 47uF 20% 6.
C682
0CE4764C638
Capacitor,AL,Radial
ESS476M6R3T1A5C07G 47uF 20% 6.
C691
0CE4764C638
Capacitor,AL,Radial
ESS476M6R3T1A5C07G 47uF 20% 6.
C693
0CE4764C638
Capacitor,AL,Radial
ESS476M6R3T1A5C07G 47uF 20% 6.
C702
0CE2274C638
Capacitor,AL,Radial
ESS227M6R3T1A5E07G 220uF 20% 6 SHL5.0TP10VB470M 470uF 20% 10V
C703
0CE477CD638
Capacitor,AL,Radial
C711
0CE4775C638
Capacitor,AL,Radial
470UF SR,SV 6.3V 20% FM5 TP 5
C713
0CE2274C638
Capacitor,AL,Radial
ESS227M6R3T1A5E07G 220uF 20% 6
C715
0CE4763C638
Capacitor,AL,Radial
SRE5.0TP6.3VB47M 47uF 20% 6.3V
C7N1
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C7N2
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C7N3
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C7N4
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C806
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C807
0CE4744K638
Capacitor,AL,Radial
ESS474M050T1A5B07G 470nF 20% 5
C808
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C809
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C812
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C814
0CE4764F638
Capacitor,AL,Radial
ESS476M016T1A5C07G 47uF 20% 16
C815
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C816
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C817
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C818
0CE4764F638
Capacitor,AL,Radial
ESS476M016T1A5C07G 47uF 20% 16
C820
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C822
0CE4764F638
Capacitor,AL,Radial
ESS476M016T1A5C07G 47uF 20% 16
C825
0CE4764C638
Capacitor,AL,Radial
ESS476M6R3T1A5C07G 47uF 20% 6.
C827
0CE4764C638
Capacitor,AL,Radial
ESS476M6R3T1A5C07G 47uF 20% 6.
C848
0CE4763F638
Capacitor,AL,Radial
SRE5.0TP16VB47M 47uF 20% 16V 5
C850
0CE2264F638
Capacitor,AL,Radial
ESS226M016T1A5B07G 22uF 20% 16
C853
0CE2264F638
Capacitor,AL,Radial
ESS226M016T1A5B07G 22uF 20% 16
C855
0CE2264F638
Capacitor,AL,Radial
ESS226M016T1A5B07G 22uF 20% 16
C858
0CE2263F638
Capacitor,AL,Radial
SRE5.0TP16VB22M 22uF 20% 16V 3
C859
0CE2264F638
Capacitor,AL,Radial
ESS226M016T1A5B07G 22uF 20% 16
C863
0CE2274C638
Capacitor,AL,Radial
ESS227M6R3T1A5E07G 220uF 20% 6
C864
0CE1064K638
Capacitor,AL,Radial
ESS106M050T1A5C07G 10uF 20% 50
C865
0CE4754K638
Capacitor,AL,Radial
ESS475M050T1A5B07G 4.7uF 20% 5
C866
0CE4754K638
Capacitor,AL,Radial
ESS475M050T1A5B07G 4.7uF 20% 5
C867
0CE2264F638
Capacitor,AL,Radial
ESS226M016T1A5B07G 22uF 20% 16
C868
0CE2264F638
Capacitor,AL,Radial
ESS226M016T1A5B07G 22uF 20% 16
C875
0CE2274C638
Capacitor,AL,Radial
ESS227M6R3T1A5E07G 220uF 20% 6
C876
0CE4775C638
Capacitor,AL,Radial
470UF SR,SV 6.3V 20% FM5 TP 5
C878
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C883
0CE4754K638
Capacitor,AL,Radial
ESS475M050T1A5B07G 4.7uF 20% 5
C884
0CE2274C638
Capacitor,AL,Radial
ESS227M6R3T1A5E07G 220uF 20% 6
C901
0CE4764F638
Capacitor,AL,Radial
ESS476M016T1A5C07G 47uF 20% 16
C902
0CE4764F638
Capacitor,AL,Radial
ESS476M016T1A5C07G 47uF 20% 16
C904
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C905
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
6 - 12
REMARKS
S AL LOCA. NO. PART NO. C907
0CE1064F638
DESCRIPTION
SPECIFICATION
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C908
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C929
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C930
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C938
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C940
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16
C946
0CE2264F638
Capacitor,AL,Radial
ESS226M016T1A5B07G 22uF 20% 16
C959
0CE2274C638
Capacitor,AL,Radial
ESS227M6R3T1A5E07G 220uF 20% 6
C961
0CE2274C638
Capacitor,AL,Radial
ESS227M6R3T1A5E07G 220uF 20% 6
C962
0CE2274C638
Capacitor,AL,Radial
ESS227M6R3T1A5E07G 220uF 20% 6
C963
0CE4775C638
Capacitor,AL,Radial
470UF SR,SV 6.3V 20% FM5 TP 5
C964
0CE4775C638
Capacitor,AL,Radial
470UF SR,SV 6.3V 20% FM5 TP 5
C965
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16 ESS106M016T1A5B07G 10uF 20% 16
C966
0CE1064F638
Capacitor,AL,Radial
C967
0CE4775C638
Capacitor,AL,Radial
470UF SR,SV 6.3V 20% FM5 TP 5
C968
0CE1064F638
Capacitor,AL,Radial
ESS106M016T1A5B07G 10uF 20% 16 ESS106M016T1A5B07G 10uF 20% 16
REMARKS
C969
0CE1064F638
Capacitor,AL,Radial
C970
0CE4775C638
Capacitor,AL,Radial
470UF SR,SV 6.3V 20% FM5 TP 5
D501
0DR104009BA
Diode,Rectifier
RL104F 400V 1.3V 5UA 30A 150NS
D901
0DR104009BA
Diode,Rectifier
RL104F 400V 1.3V 5UA 30A 150NS
D902
0DR104009BA
Diode,Rectifier
RL104F 400V 1.3V 5UA 30A 150NS
D903
0DR104009BA
Diode,Rectifier
RL104F 400V 1.3V 5UA 30A 150NS
D904
0DR104009BA
Diode,Rectifier
RL104F 400V 1.3V 5UA 30A 150NS
D905
0DR104009BA
Diode,Rectifier
RL104F 400V 1.3V 5UA 30A 150NS
D906
0DR104009BA
Diode,Rectifier
RL104F 400V 1.3V 5UA 30A 150NS
IC504
0IKE703100A
IC,Voltage Detector
KIA7031P -0.3TO15V 3.1V 400MW
IC505
0IKE704200B
IC Assembly
KIA7042P KIA7042P(AT) TO-92 4.
L300
0LR0392J025
Inductor,Wire Wound,Radial
EL0405RA-390J-3 39UH 5% - 223M
L302
0LR1000J025
Inductor,Wire Wound,Radial
EL0405RA-101J-3 100UH 5% 0V 15
L303
0LR1500J025
Inductor,Wire Wound,Radial
EL0405RA-151J-3 150UH 5% 0V 13
L306
0LR1000J025
Inductor,Wire Wound,Radial
EL0405RA-101J-3 100UH 5% 0V 15
L307
0LR0122K4N5
Inductor,Wire Wound,Radial
12UH 10% R 3X5 TR5
L308
0LR0102K035
Inductor,Wire Wound,Radial
EL0606RA-100K-3 10UH 10% - 353
L311
0LR1000J025
Inductor,Wire Wound,Radial
EL0405RA-101J-3 100UH 5% 0V 15
L501
0LR0102K035
Inductor,Wire Wound,Radial
EL0606RA-100K-3 10UH 10% - 353
L502
0LR1000K035
Inductor,Wire Wound,Radial
EL0606RA-101K-3 100UH 10% - 17
L504
0LR1000K035
Inductor,Wire Wound,Radial
EL0606RA-101K-3 100UH 10% - 17
L801
0LR1000K035
Inductor,Wire Wound,Radial
EL0606RA-101K-3 100UH 10% - 17
L802
0LR1000K035
Inductor,Wire Wound,Radial
EL0606RA-101K-3 100UH 10% - 17
L805
636-004C
Filter,Bead
BFS3550R2FD8 70OHM 9X3.5X7.5MM
L808
0LR1000K035
Inductor,Wire Wound,Radial
EL0606RA-101K-3 100UH 10% - 17
L810
636-004C
Filter,Bead
BFS3550R2FD8 70OHM 9X3.5X7.5MM
L811
636-004C
Filter,Bead
BFS3550R2FD8 70OHM 9X3.5X7.5MM
L812
636-004C
Filter,Bead
BFS3550R2FD8 70OHM 9X3.5X7.5MM
L813
636-004C
Filter,Bead
BFS3550R2FD8 70OHM 9X3.5X7.5MM
L911
0LR0102K035
Inductor,Wire Wound,Radial
EL0606RA-100K-3 10UH 10% - 353
L914
636-004C
Filter,Bead
BFS3550R2FD8 70OHM 9X3.5X7.5MM
L915
636-004C
Filter,Bead
BFS3550R2FD8 70OHM 9X3.5X7.5MM
L916
0LR0102K035
Inductor,Wire Wound,Radial
EL0606RA-100K-3 10UH 10% - 353
Q301
0TR534409AA
TR,Bipolar
2SC5344Y NPN 5V 35V 30V 800MA
Q301
0TR320309AA
TR,Bipolar
KTC3203 NPN 5V 35V 30V 800MA 1
Q302
0TR928009AD
TR,Bipolar
KSA928A-Y PNP -5V -30V -30V -2
Q302
0TR127709AB
TR,Bipolar
STB1277LY-AT PNP -5V -30V -30V
ALTERNATE
Q302
0TR127309AA
TR,Bipolar
KTA1273 PNP -5V -30V -30V -2A
ALTERNATE
Q503
0TR127309AA
TR,Bipolar
KTA1273 PNP -5V -30V -30V -2A
Q508
0TR127309AA
TR,Bipolar
KTA1273 PNP -5V -30V -30V -2A
Q801
0TR186209AB
TR,Bipolar
STD1862LY-AT NPN 5V 30V 30V 2A
6 - 13
ALTERNATE
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
Q801
0TR320509AB
Transistor Assembly
KTC3205-Y(KTC2236A) KTC3205-Y(
Q802
0TR186209AB
TR,Bipolar
STD1862LY-AT NPN 5V 30V 30V 2A
Q802
0TR320509AB
Transistor Assembly
KTC3205-Y(KTC2236A) KTC3205-Y(
Q803
0TR126809BA
TR,Bipolar
KTA1268-BL PNP -5V -0.12KV -0.
REMARKS ALTERNATE ALTERNATE
Q804
0TR319809AC
Transistor Assembly
KTC3198 KTC3198 TP KEC - - -BL
Q804
0TR534309BA
TR,Bipolar
2SC5343L NPN 5V 60V 50V 150MA
ALTERNATE
Q804
0TR319909AF
TR,Bipolar
KTC3199-BL NPN 5V 50V 50V 150M
ALTERNATE
Q805
0TR186209AB
TR,Bipolar
STD1862LY-AT NPN 5V 30V 30V 2A
Q805
0TR320509AB
Transistor Assembly
KTC3205-Y(KTC2236A) KTC3205-Y(
R835
0RS3301J619
Resistor,Metal Oxide Film
SMR01R0J3K30 3.3KOHM 5% 1W 6.5
SW501
556-213C
Switch,Tact
THVV951BAA 1C1P 12VDC 0.05A HO
SW502
556-213C
Switch,Tact
THVV951BAA 1C1P 12VDC 0.05A HO
X501
6212AA2148F
Crystal
HC-49/S 14.31818MHZ 25PPM 14.3
AR401
0RRZVTA001F
Resistor,Array
RCA86TRJ33R0 33OHM 5% 1/16W 4
AR402
0RRZVTA001F
Resistor,Array
RCA86TRJ33R0 33OHM 5% 1/16W 4
AR651
0RR0222Q62A
Resistor,Array
RCA86TRJ22R0 22OHM 5% 1/16W 4
AR652
0RR0222Q62A
Resistor,Array
RCA86TRJ22R0 22OHM 5% 1/16W 4
AR653
0RRZVTA001F
Resistor,Array
RCA86TRJ33R0 33OHM 5% 1/16W 4
AR654
0RRZVTA001F
Resistor,Array
RCA86TRJ33R0 33OHM 5% 1/16W 4
C302
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C304
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C306
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C307
0CH1152K512
Capacitor,Ceramic,Chip
0603B152K500CT 1.5nF 10% 50V Y
C311
0CH1182K512
Capacitor,Ceramic,Chip
0603B182K500CT 1.8nF 10% 50V Y
C312
0CH4471K412
Capacitor,Ceramic,Chip
0603N471J500LT 470pF 5% 50V C0
C315
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C316
0CH1472K512
Capacitor,Ceramic,Chip
0603B472K500CT 4.7nF 10% 50V Y
C320
0CH4151K412
Capacitor,Ceramic,Chip
0603N151J500LT 150pF 5% 50V C0
C321
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C322
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C323
0CH4470K412
Capacitor,Ceramic,Chip
0603N470J500LT 47pF 5% 50V C0G
C324
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C325
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C332
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C335
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C336
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C338
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C342
0CH4331K412
Capacitor,Ceramic,Chip
0603N331J500LT 330pF 5% 50V C0
C344
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C345
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C346
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C347
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C348
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C351
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C352
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C354
0CH1472K512
Capacitor,Ceramic,Chip
0603B472K500CT 4.7nF 10% 50V Y
C356
0CH1333K562
Capacitor,Ceramic,Chip
0603B333K500CT 33nF 10% 50V X7 CC0603ZRY5V9BB223 22nF -20TO+8
C357
0CH1223K942
Capacitor,Ceramic,Chip
C360
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C362
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C365
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C367
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C368
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C369
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C370
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C371
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C376
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
6 - 14
ALTERNATE
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C405
0CK475CD64A
Capacitor,Ceramic,Chip
C1608Y5V1A475MT 4.7uF 20% 10V
C407
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C409
0CH1223K942
Capacitor,Ceramic,Chip
CC0603ZRY5V9BB223 22nF -20TO+8
C410
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C381
0CH1104K942
C403 C404
C412
0CH1223K942
Capacitor,Ceramic,Chip
CC0603ZRY5V9BB223 22nF -20TO+8
C413
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C414
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C417
0CH1223K942
Capacitor,Ceramic,Chip
CC0603ZRY5V9BB223 22nF -20TO+8
C418
0CK475CD64A
Capacitor,Ceramic,Chip
C1608Y5V1A475MT 4.7uF 20% 10V
C420
0CH1223K942
Capacitor,Ceramic,Chip
CC0603ZRY5V9BB223 22nF -20TO+8
C421
0CH1223K942
Capacitor,Ceramic,Chip
CC0603ZRY5V9BB223 22nF -20TO+8
C423
0CH1223K942
Capacitor,Ceramic,Chip
CC0603ZRY5V9BB223 22nF -20TO+8
C425
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C432
0CH4360K412
Capacitor,Ceramic,Chip
C1608C0G1H360JT 36pF 5% 50V C0
C433
0CH4360K412
Capacitor,Ceramic,Chip
C1608C0G1H360JT 36pF 5% 50V C0
C434
0CK475CD64A
Capacitor,Ceramic,Chip
C1608Y5V1A475MT 4.7uF 20% 10V
C438
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C444
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C446
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C447
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C449
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C450
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C451
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C452
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C467
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C471
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C472
0CH1474K562
Capacitor,Ceramic,Chip
CS1608XR474K100NR 470nF 10% 10
C473
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C475
0CH1225F946
Capacitor,Ceramic,Chip
0805F225Z160CT 2.2uF -20TO+80%
C476
0CH1225F946
Capacitor,Ceramic,Chip
0805F225Z160CT 2.2uF -20TO+80%
C477
0CH1474K562
Capacitor,Ceramic,Chip
CS1608XR474K100NR 470nF 10% 10
C491
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C503
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C504
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C505
0CH1222K512
Capacitor,Ceramic,Chip
0603B222K500CT 2.2nF 10% 50V Y
C506
0CH1333K562
Capacitor,Ceramic,Chip
0603B333K500CT 33nF 10% 50V X7
C509
0CH1333K562
Capacitor,Ceramic,Chip
0603B333K500CT 33nF 10% 50V X7
C510
0CH4470K412
Capacitor,Ceramic,Chip
0603N470J500LT 47pF 5% 50V C0G
C511
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C512
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C513
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C516
0CH4150K412
Capacitor,Ceramic,Chip
0603N150J500LT 15pF 5% 50V C0G
C517
0CH4150K412
Capacitor,Ceramic,Chip
0603N150J500LT 15pF 5% 50V C0G
C518
0CH4270K412
Capacitor,Ceramic,Chip
0603N270J500LT 27pF 5% 50V C0G
C519
0CH4240K412
Capacitor,Ceramic,Chip
0603N240J500LT 24pF 5% 50V C0G
C520
0CH1223K942
Capacitor,Ceramic,Chip
CC0603ZRY5V9BB223 22nF -20TO+8
C522
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C531
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C532
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C535
0CH4681K412
Capacitor,Ceramic,Chip
0603N681J500LT 680pF 5% 50V C0
C539
0CH1223K942
Capacitor,Ceramic,Chip
CC0603ZRY5V9BB223 22nF -20TO+8
C540
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C541
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C543
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
6 - 15
REMARKS
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
0CH4470K412
Capacitor,Ceramic,Chip
0603N470J500LT 47pF 5% 50V C0G
C548
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C549
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C545
C550
0CH1222K512
Capacitor,Ceramic,Chip
0603B222K500CT 2.2nF 10% 50V Y
C551
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C552
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C553
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C557
0CH1223K942
Capacitor,Ceramic,Chip
CC0603ZRY5V9BB223 22nF -20TO+8
C558
0CH1223K942
Capacitor,Ceramic,Chip
CC0603ZRY5V9BB223 22nF -20TO+8
C559
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C560
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C561
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C652
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C653
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C660
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C661
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C662
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C665
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C666
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C667
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C668
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C669
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C671
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C676
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C680
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C685
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C686
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C687
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C688
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C689
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C690
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C692
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C694
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C696
0CH4101K412
Capacitor,Ceramic,Chip
0603N101J500LT 100pF 5% 50V C0
C697
0CH4101K412
Capacitor,Ceramic,Chip
0603N101J500LT 100pF 5% 50V C0
C701
0CH7476D651
Capacitor,TA,Niobium
TSM1A476CSSR 47uF 20% 10V 4.7U
C704
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C709
0CH1105D942
Capacitor,Ceramic,Chip
0603F105Z100CT 1uF -20TO+80% 1
C712
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C714
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C716
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C717
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C7M5
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C7M6
0CH4270K412
Capacitor,Ceramic,Chip
0603N270J500LT 27pF 5% 50V C0G
C7M7
0CH1682K512
Capacitor,Ceramic,Chip
0603B682K500CT 6.8nF 10% 50V Y
C802
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C803
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C804
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C805
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C810
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C811
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C813
0CH1682K512
Capacitor,Ceramic,Chip
0603B682K500CT 6.8nF 10% 50V Y
C819
0CH1682K512
Capacitor,Ceramic,Chip
0603B682K500CT 6.8nF 10% 50V Y
C821
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C823
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C824
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
C826
0CH1103K562
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V X7
6 - 16
REMARKS
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
C828
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C829
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C832
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C833
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C836
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C837
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C838
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C839
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C849
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C851
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C852
0CH4151K412
Capacitor,Ceramic,Chip
0603N151J500LT 150pF 5% 50V C0
C854
0CH4681K412
Capacitor,Ceramic,Chip
0603N681J500LT 680pF 5% 50V C0
C856
0CH4681K412
Capacitor,Ceramic,Chip
0603N681J500LT 680pF 5% 50V C0
C857
0CH4151K412
Capacitor,Ceramic,Chip
0603N151J500LT 150pF 5% 50V C0
C860
0CH4681K412
Capacitor,Ceramic,Chip
0603N681J500LT 680pF 5% 50V C0
C861
0CH4681K412
Capacitor,Ceramic,Chip
0603N681J500LT 680pF 5% 50V C0
C869
0CH1222K512
Capacitor,Ceramic,Chip
0603B222K500CT 2.2nF 10% 50V Y
C870
0CH1222K512
Capacitor,Ceramic,Chip
0603B222K500CT 2.2nF 10% 50V Y
C871
0CH1474H942
Capacitor,Ceramic,Chip
C1608Y5V1E474ZT 470nF -20TO+80
C872
0CH1332K566
Capacitor,Ceramic,Chip
C2012X7R1H332KT 3.3nF 10% 50V
C874
0CH1224H946
Capacitor,Ceramic,Chip
0805F224Z250CT 220nF -20TO+80%
C880
0CK106FDG6A
Capacitor,Ceramic,Chip
C3225X7R1A106KT 10uF 10% 10V X
C881
0CK106FDG6A
Capacitor,Ceramic,Chip
C3225X7R1A106KT 10uF 10% 10V X
C882
0CK106FDG6A
Capacitor,Ceramic,Chip
C3225X7R1A106KT 10uF 10% 10V X
C903
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C909
0CH1101K965
Capacitor,Ceramic,Chip
0603N101J500LT 100pF 10% 50V C
C911
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X 0603N101J500LT 100pF 10% 50V C
C912
0CH1101K965
Capacitor,Ceramic,Chip
C913
0CH1101K965
Capacitor,Ceramic,Chip
0603N101J500LT 100pF 10% 50V C
C914
0CH1223K942
Capacitor,Ceramic,Chip
CC0603ZRY5V9BB223 22nF -20TO+8
C915
0CH4270K412
Capacitor,Ceramic,Chip
0603N270J500LT 27pF 5% 50V C0G
C917
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C918
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C919
0CH1225F946
Capacitor,Ceramic,Chip
0805F225Z160CT 2.2uF -20TO+80%
C923
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C925
0CH1101K965
Capacitor,Ceramic,Chip
0603N101J500LT 100pF 10% 50V C
C927
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C931
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C933
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C935
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C936
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C939
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C941
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C944
0CH1102K512
Capacitor,Ceramic,Chip
0603B102K500CT 1nF 10% 50V Y5P
C955
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
C956
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C957
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C958
0CH1105F942
Capacitor,Ceramic,Chip
0603F105Z160CT 1uF -20TO+80% 1
C960
0CH1104K512
Capacitor,Ceramic,Chip
0603B104K500CT 100nF 10% 16V X
CN651
6630R-SY08W
Connector,I/O
HMR48-AK5210 19P 0.50MM ANGLE
CN651
EAG33654001
Connector,DSUB
QJ51193-EEB4-4F HDMI 19P 0.5MM
D652
0DSKE00028A
Diode,Switching
KDS160E 1.2V 85V 300MA 2A 4NSE
D653
0DSKE00028A
Diode,Switching
KDS160E 1.2V 85V 300MA 2A 4NSE
D802
0DSRM00148A
Diode,Switching
1SS355 1.2V 90V 225MA 500MA 4N
D803
0DSKE00048A
Diode,Schottky
SMAB34 520MV 40V 3A 0SEC 0F 0W
FB653
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
FB654
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
6 - 17
REMARKS
ALTERNATE
S AL LOCA. NO. PART NO. FB655
6200HJC102A
DESCRIPTION
SPECIFICATION
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25 HB-1M2012-102JT 1000OHM 2X1.25
FB656
6200HJC102A
Filter,Bead
IC1601
EAN30490201
IC,Data Controller
TDA9983AHW/8/CI 1.65 to 5.25V
IC1603
0IPRP00664A
IC,I/O Support Chip
UPA672T 50V 200mA - SC70 R/TP
IC1604
0IPMGUC005A
IC,LDO Voltage Regulator
LD1117A-3.3-A 4.75TO10V 3.3V 1
IC401
EAN33843801
IC,Video Decode
SAA7138FHL NTSC 3.1VTO3.5V 58. PCM1780 4.5to5.5v 36.86MHZ 24B
IC402
EAN33957101
IC,D/A Converter
IC506
0ILNRPY001B
IC,LED Driver
PT6955 4.5TO5.5V 0 0W SOP R/TP
IC701
0IPMGUC008C
IC,LDO Voltage Regulator
LD1117AL-2.5-SOT223-AR 15V 2.5
IC702
0IPMGUC005A
IC,LDO Voltage Regulator
LD1117A-3.3-A 4.75TO10V 3.3V 1
IC801
0IPH960500A
IC,Hi,Fi
TDA9605H 8.1TO13.2V_4.75TO5.5V
IC802
0ILNRON005A
IC,OP Amplifier
MC33202DR2 - 10mV 0.008% - - 5
IC804
EAN31859201
IC,DC,DC Converter
SC4521SETRT 24V 0.8V 2W SO-8 R
IC805
0IPMGUC006A
IC,LDO Voltage Regulator
LD1117A-1.8V 3.2TO10V 1.8V 12W
IC901
EAN33463001
IC,Line Driver
MM1763XJBE 4.5to5.5 12 2.4W SS
L401
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L402
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L403
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L405
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L407
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L408
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L410
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L411
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L491
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L506
0LCCE00004L
Inductor,Multilayer,Chip
Fl-B2012-102KJT 1UH 10% - 100M
L507
0LCCE00004L
Inductor,Multilayer,Chip
Fl-B2012-102KJT 1UH 10% - 100M
L702
0LC02491A1A
Filter,Bead
HH-1M2012-601 600OHM 2.0X1.25X
L705
0RH0000D622
Resistor,Chip
MCR10EZHJ000 0OHM 5% 1/8W 2012
L804
EAP32850601
Inductor,Wire Wound,Chip
SFCB7050-2R3220 22UH 20% 0V 2.
L806
0LCCE00004E
Inductor,Multilayer,Chip
FI-C2012-103KJT 10UH 10% - 25M
L807
0LCCE00004E
Inductor,Multilayer,Chip
FI-C2012-103KJT 10UH 10% - 25M
L905
0LCCE00004E
Inductor,Multilayer,Chip
FI-C2012-103KJT 10UH 10% - 25M
L906
0LCCE00004E
Inductor,Multilayer,Chip
FI-C2012-103KJT 10UH 10% - 25M
L907
0LCCE00004E
Inductor,Multilayer,Chip
FI-C2012-103KJT 10UH 10% - 25M
L908
0LCCE00004E
Inductor,Multilayer,Chip
FI-C2012-103KJT 10UH 10% - 25M
L909
0LCCE00004E
Inductor,Multilayer,Chip
FI-C2012-103KJT 10UH 10% - 25M
L910
0LCCE00004E
Inductor,Multilayer,Chip
FI-C2012-103KJT 10UH 10% - 25M
L912
0LCCE00004L
Inductor,Multilayer,Chip
Fl-B2012-102KJT 1UH 10% - 100M
L913
0LCCE00004L
Inductor,Multilayer,Chip
Fl-B2012-102KJT 1UH 10% - 100M
L917
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L918
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L919
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L920
6200S-JC01A
Filter,Bead
HB-1M2012-121JT 120OHM 2X1.25X
REMARKS
Q303
0TR103009AA
TR,Bipolar
KRC103S-T1 NPN 40V - 50V 100MA
Q303
0TR124009AP
TR,Bipolar
DTC124EK-T146 NPN 40V - 50V 10
ALTERNATE
Q303
0TRAU80002A
TR,Bipolar
SRC1203S NPN 40V - 50V 100MA 5
ALTERNATE
Q305
0TR387509AC
TR,Bipolar
KTC3875S-GR(ALG) NPN 5V 60V 50
Q306
0TR387509AC
TR,Bipolar
KTC3875S-GR(ALG) NPN 5V 60V 50
Q307
0TR103009AC
TR,Bipolar
KRA103S-T1 PNP -40V - -50V -0.
Q310
0TR150409AC
TR,Bipolar
KTA1504-GR PNP -5V -50V -50V -
Q501
0TR103009AA
TR,Bipolar
KRC103S-T1 NPN 40V - 50V 100MA
Q502
0TR103009AA
TR,Bipolar
KRC103S-T1 NPN 40V - 50V 100MA
Q504
0TR387509AC
TR,Bipolar
KTC3875S-GR(ALG) NPN 5V 60V 50
Q509
0TR150409AC
TR,Bipolar
KTA1504-GR PNP -5V -50V -50V -
Q510
0TR150409AC
TR,Bipolar
KTA1504-GR PNP -5V -50V -50V -
Q661
0TR387509AC
TR,Bipolar
KTC3875S-GR(ALG) NPN 5V 60V 50
Q662
0TR103009AA
TR,Bipolar
KRC103S-T1 NPN 40V - 50V 100MA
6 - 18
S AL LOCA. NO. PART NO. Q7M1
0TR150409AC
DESCRIPTION
SPECIFICATION
TR,Bipolar
KTA1504-GR PNP -5V -50V -50V -
Q7M2
0TR150409AC
TR,Bipolar
KTA1504-GR PNP -5V -50V -50V -
Q901
0TR150409AC
TR,Bipolar
KTA1504-GR PNP -5V -50V -50V -
Q902
0TR387509AC
TR,Bipolar
KTC3875S-GR(ALG) NPN 5V 60V 50
Q903
0TR387509AC
TR,Bipolar
KTC3875S-GR(ALG) NPN 5V 60V 50
Q904
0TR103009AA
TR,Bipolar
KRC103S-T1 NPN 40V - 50V 100MA
Q905
0TR387509AC
TR,Bipolar
KTC3875S-GR(ALG) NPN 5V 60V 50
Q906
0TR103009AA
TR,Bipolar
KRC103S-T1 NPN 40V - 50V 100MA
Q907
0TR150409AC
TR,Bipolar
KTA1504-GR PNP -5V -50V -50V -
Q911
0TR387509AC
TR,Bipolar
KTC3875S-GR(ALG) NPN 5V 60V 50
Q912
0TR387509AC
TR,Bipolar
KTC3875S-GR(ALG) NPN 5V 60V 50
Q915
0TR150409AC
TR,Bipolar
KTA1504-GR PNP -5V -50V -50V -
R301
0RH1202C622
Resistor,Chip
MCR03EZPJ123 12KOHM 5% 1/10W 1
R302
0RH3303C622
Resistor,Chip
MCR03EZPJ334 330KOHM 5% 1/10W
R303
0RH1800C622
Resistor,Chip
MCR03EZPJ181 180OHM 5% 1/10W 1
R304
0RH4702C622
Resistor,Chip
MCR03EZPJ473 47KOHM 5% 1/10W 1
R305
0RH2202C622
Resistor,Chip
MCR03EZPJ223 22KOHM 5% 1/10W 1
R306
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R307
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R308
0RH6801C622
Resistor,Chip
MCR03EZPJ682 6.8KOHM 5% 1/10W
R309
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R310
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R311
0RH2701C622
Resistor,Chip
MCR03EZPJ272 2.7KOHM 5% 1/10W
R312
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R313
0RH1200C622
Resistor,Chip
MCR03EZPJ121 120OHM 5% 1/10W 1
R315
0RH2201C622
Resistor,Chip
MCR03EZPJ222 2.2KOHM 5% 1/10W
R316
0RH2701D622
Resistor,Chip
MCR10EZHJ272 2.7KOHM 5% 1/8W 2
R317
0RH4701D622
Resistor,Chip
MCR10EZHJ472 4.7KOHM 5% 1/8W 2
R320
0RH3302C622
Resistor,Chip
MCR03EZPJ333 33KOHM 5% 1/10W 1
R321
0RH3301C622
Resistor,Chip
MCR03EZPJ332 3.3KOHM 5% 1/10W
R322
0RH8202C622
Resistor,Chip
MCR03EZPJ823 82KOHM 5% 1/10W 1
R323
0RH6801C622
Resistor,Chip
MCR03EZPJ682 6.8KOHM 5% 1/10W
R324
0RH1501C622
Resistor,Chip
MCR03EZPJ152 1.5KOHM 5% 1/10W
R325
0RH3301C622
Resistor,Chip
MCR03EZPJ332 3.3KOHM 5% 1/10W
R332
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R333
0RH5601C622
Resistor,Chip
MCR03EZPJ562 5.6KOHM 5% 1/10W
R337
0RH5602C622
Resistor,Chip
MCR03EZPJ563 56KOHM 5% 1/10W 1
R338
0RH5601C622
Resistor,Chip
MCR03EZPJ562 5.6KOHM 5% 1/10W
R339
0RJ6804C677
Resistor,Chip
MCR03EZPJ685 6.8MOHM 5% 1/10W
R342
0RH1502C622
Resistor,Chip
MCR03EZPJ153 15KOHM 5% 1/10W 1
R350
0RH1001D622
Resistor,Chip
MCR10EZHJ102 1KOHM 5% 1/8W 201
R351
0RH1001D622
Resistor,Chip
MCR10EZHJ102 1KOHM 5% 1/8W 201
R364
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R365
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R407
0RH2401C622
Resistor,Chip
MCR03EZPJ242 2.4KOHM 5% 1/10W
R408
0RH2200C622
Resistor,Chip
MCR03EZPJ221 220OHM 5% 1/10W 1
R409
0RH6200C622
Resistor,Chip
MCR03EZPJ621 620OHM 5% 1/10W 1
R416
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R421
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R422
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R423
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R424
0RH0102C622
Resistor,Chip
MCR03EZPJ100 10OHM 5% 1/10W 16
R425
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R427
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R431
0RH0332C622
Resistor,Chip
MCR03EZPJ330 33OHM 5% 1/10W 16
R433
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R438
0RH4701D622
Resistor,Chip
MCR10EZHJ472 4.7KOHM 5% 1/8W 2
6 - 19
REMARKS
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
R439
0RH5600C622
Resistor,Chip
MCR03EZPJ561 560OHM 5% 1/10W 1
R440
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R441
0RH5600C622
Resistor,Chip
MCR03EZPJ561 560OHM 5% 1/10W 1
R442
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R443
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R444
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R445
0RH1004C622
Resistor,Chip
MCR03EZPJ105 1MOHM 5% 1/10W 16
R501
0RH6801C622
Resistor,Chip
MCR03EZPJ682 6.8KOHM 5% 1/10W
R502
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R503
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R504
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R505
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R506
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R507
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R508
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R509
0RH5601C622
Resistor,Chip
MCR03EZPJ562 5.6KOHM 5% 1/10W
R510
0RH5601C622
Resistor,Chip
MCR03EZPJ562 5.6KOHM 5% 1/10W
R511
0RH5601C622
Resistor,Chip
MCR03EZPJ562 5.6KOHM 5% 1/10W
R512
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R513
0RH5601C622
Resistor,Chip
MCR03EZPJ562 5.6KOHM 5% 1/10W
R514
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R515
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R516
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R517
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R518
0RH1200C622
Resistor,Chip
MCR03EZPJ121 120OHM 5% 1/10W 1
R519
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R520
0RH2202C622
Resistor,Chip
MCR03EZPJ223 22KOHM 5% 1/10W 1
R521
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R522
0RH1200C622
Resistor,Chip
MCR03EZPJ121 120OHM 5% 1/10W 1
R523
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R524
0RH2202C622
Resistor,Chip
MCR03EZPJ223 22KOHM 5% 1/10W 1
R525
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R526
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R527
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R528
0RH1200C622
Resistor,Chip
MCR03EZPJ121 120OHM 5% 1/10W 1
R529
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R530
0RH2702C622
Resistor,Chip
MCR03EZPJ273 27KOHM 5% 1/10W 1
R532
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R533
0RH2702C622
Resistor,Chip
MCR03EZPJ273 27KOHM 5% 1/10W 1
R534
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R535
0RH1004C622
Resistor,Chip
MCR03EZPJ105 1MOHM 5% 1/10W 16
R536
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R537
0RH1003C622
Resistor,Chip
MCR03EZPJ104 100KOHM 5% 1/10W
R538
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R539
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R540
0RH2201C622
Resistor,Chip
MCR03EZPJ222 2.2KOHM 5% 1/10W
R541
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R542
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R554
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R555
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R556
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R557
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R558
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R559
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R560
0RH4702C622
Resistor,Chip
MCR03EZPJ473 47KOHM 5% 1/10W 1
R561
0RH3300C622
Resistor,Chip
MCR03EZPJ331 330OHM 5% 1/10W 1
R562
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
6 - 20
REMARKS
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
R567
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R568
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R569
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R570
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R571
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R572
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R573
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R574
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R575
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R576
0RH2001C622
Resistor,Chip
MCR03EZPJ202 2KOHM 5% 1/10W 16
R577
0RH2001C622
Resistor,Chip
MCR03EZPJ202 2KOHM 5% 1/10W 16
R578
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R579
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R581
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R582
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R583
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R585
0RH1202C622
Resistor,Chip
MCR03EZPJ123 12KOHM 5% 1/10W 1
R586
0RH5602C622
Resistor,Chip
MCR03EZPJ563 56KOHM 5% 1/10W 1
R589
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R590
0RH2702C622
Resistor,Chip
MCR03EZPJ273 27KOHM 5% 1/10W 1
R591
0RH2701C622
Resistor,Chip
MCR03EZPJ272 2.7KOHM 5% 1/10W
R592
0RH4700C622
Resistor,Chip
MCR03EZPJ471 470OHM 5% 1/10W 1
R593
0RH2701C622
Resistor,Chip
MCR03EZPJ272 2.7KOHM 5% 1/10W
R594
0RH2201C622
Resistor,Chip
MCR03EZPJ222 2.2KOHM 5% 1/10W
R595
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R596
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R597
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R598
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R5G1
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R5G2
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R5K1
0RH6800C622
Resistor,Chip
MCR03EZPJ681 680OHM 5% 1/10W 1
R5K2
0RH8200C622
Resistor,Chip
MCR03EZPJ821 820OHM 5% 1/10W 1
R5K3
0RH1201C622
Resistor,Chip
MCR03EZPJ122 1.2KOHM 5% 1/10W
R5K4
0RH1501C622
Resistor,Chip
MCR03EZPJ152 1.5KOHM 5% 1/10W
R651
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R652
0RH3900C622
Resistor,Chip
MCR03EZPJ391 390OHM 5% 1/10W 1
R654
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R657
0RH1801C622
Resistor,Chip
MCR03EZPJ182 1.8KOHM 5% 1/10W
R658
0RH1801C622
Resistor,Chip
MCR03EZPJ182 1.8KOHM 5% 1/10W
R659
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R661
0RH4702C622
Resistor,Chip
MCR03EZPJ473 47KOHM 5% 1/10W 1
R662
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R663
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R664
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R667
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R668
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R669
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R670
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R673
0RH4702C622
Resistor,Chip
MCR03EZPJ473 47KOHM 5% 1/10W 1
R674
0RH2200C622
Resistor,Chip
MCR03EZPJ221 220OHM 5% 1/10W 1
R675
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R679
0RH8201C422
Resistor,Chip
MCR03EZPF822 8.2KOHM 1% 1/10W
R680
0RH2702C622
Resistor,Chip
MCR03EZPJ273 27KOHM 5% 1/10W 1
R681
0RH2702C622
Resistor,Chip
MCR03EZPJ273 27KOHM 5% 1/10W 1
R682
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R684
0RH2702C622
Resistor,Chip
MCR03EZPJ273 27KOHM 5% 1/10W 1
R686
0RH2200C622
Resistor,Chip
MCR03EZPJ221 220OHM 5% 1/10W 1
6 - 21
REMARKS
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
R687
0RH8201C422
Resistor,Chip
MCR03EZPF822 8.2KOHM 1% 1/10W
R713
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R716
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R717
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R719
0RH2401C622
Resistor,Chip
MCR03EZPJ242 2.4KOHM 5% 1/10W
R7M1
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R7M2
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R7M3
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R7M4
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R7N1
0RH3301C622
Resistor,Chip
MCR03EZPJ332 3.3KOHM 5% 1/10W
R7N2
0RH3301C622
Resistor,Chip
MCR03EZPJ332 3.3KOHM 5% 1/10W
R7N3
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R7N4
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R7N5
0RH3303C622
Resistor,Chip
MCR03EZPJ334 330KOHM 5% 1/10W
R7N6
0RH1003C622
Resistor,Chip
MCR03EZPJ104 100KOHM 5% 1/10W
R7N7
0RH3303C622
Resistor,Chip
MCR03EZPJ334 330KOHM 5% 1/10W
R7N8
0RH1003C622
Resistor,Chip
MCR03EZPJ104 100KOHM 5% 1/10W
R801
0RH3304C622
Resistor,Chip
MCR03EZPJ335 3.3MOHM 5% 1/10W
R802
0RH3302C622
Resistor,Chip
MCR03EZPJ333 33KOHM 5% 1/10W 1
R803
0RH2701C622
Resistor,Chip
MCR03EZPJ272 2.7KOHM 5% 1/10W
R804
0RH3902C622
Resistor,Chip
MCR03EZPJ393 39KOHM 5% 1/10W 1
R805
0RH2701C622
Resistor,Chip
MCR03EZPJ272 2.7KOHM 5% 1/10W
R806
0RH3302C622
Resistor,Chip
MCR03EZPJ333 33KOHM 5% 1/10W 1
R807
0RH4700C622
Resistor,Chip
MCR03EZPJ471 470OHM 5% 1/10W 1
R808
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R809
0RH1802C622
Resistor,Chip
MCR03EZPJ183 18KOHM 5% 1/10W 1
R810
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R811
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R812
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R819
0RJ0000H680
Resistor,Chip
MCR50JZHJ000 0OHM 5% 1/2W 5025
R821
0RH2201C622
Resistor,Chip
MCR03EZPJ222 2.2KOHM 5% 1/10W
R823
0RH2201C622
Resistor,Chip
MCR03EZPJ222 2.2KOHM 5% 1/10W
R824
0RH0000D622
Resistor,Chip
MCR10EZHJ000 0OHM 5% 1/8W 2012
R825
0RH0000D622
Resistor,Chip
MCR10EZHJ000 0OHM 5% 1/8W 2012
R829
0RH5600C622
Resistor,Chip
MCR03EZPJ561 560OHM 5% 1/10W 1
R830
0RH5600C622
Resistor,Chip
MCR03EZPJ561 560OHM 5% 1/10W 1
R833
0RH5600C622
Resistor,Chip
MCR03EZPJ561 560OHM 5% 1/10W 1
R834
0RH5600C622
Resistor,Chip
MCR03EZPJ561 560OHM 5% 1/10W 1
R836
0RH3301D622
Resistor,Chip
MCR10EZHJ332 3.3KOHM 5% 1/8W 2
R837
0RH3301D622
Resistor,Chip
MCR10EZHJ332 3.3KOHM 5% 1/8W 2
R838
0RH1002D622
Resistor,Chip
MCR10EZHJ103 10KOHM 5% 1/8W 20
R839
0RH1002D622
Resistor,Chip
MCR10EZHJ103 10KOHM 5% 1/8W 20
R840
0RH1003D622
Resistor,Chip
MCR10EZHJ104 100KOHM 5% 1/8W 2
R842
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R843
0RH1802D622
Resistor,Chip
MCR10EZHJ183 18KOHM 5% 1/8W 20
R844
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R845
0RH4702C622
Resistor,Chip
MCR03EZPJ473 47KOHM 5% 1/10W 1
R846
0RH1002D622
Resistor,Chip
MCR10EZHJ103 10KOHM 5% 1/8W 20
R847
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R848
0RH2001C622
Resistor,Chip
MCR03EZPJ202 2KOHM 5% 1/10W 16
R849
0RH6200D622
Resistor,Chip
MCR10EZHJ621 620OHM 5% 1/8W 20
R850
0RH5601D422
Resistor,Chip
MCR10EZHF562 5.6KOHM 1% 1/8W 2
R851
0RH1002D422
Resistor,Chip
MCR10EZHF103 10KOHM 1% 1/8W 20
R853
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R854
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R861
0RH0752C622
Resistor,Chip
MCR03EZPJ750 75OHM 5% 1/10W 16
R864
0RH1202C622
Resistor,Chip
MCR03EZPJ123 12KOHM 5% 1/10W 1
6 - 22
REMARKS
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
R865
0RH1502C622
Resistor,Chip
MCR03EZPJ153 15KOHM 5% 1/10W 1
R866
0RH7501C622
Resistor,Chip
MCR03EZPJ752 7.5KOHM 5% 1/10W
R867
0RH7501C622
Resistor,Chip
MCR03EZPJ752 7.5KOHM 5% 1/10W
R868
0RH7501C622
Resistor,Chip
MCR03EZPJ752 7.5KOHM 5% 1/10W
R869
0RH5101C622
Resistor,Chip
MCR03EZPJ512 5.1KOHM 5% 1/10W
R870
0RH7501C622
Resistor,Chip
MCR03EZPJ752 7.5KOHM 5% 1/10W
R871
0RH5101C622
Resistor,Chip
MCR03EZPJ512 5.1KOHM 5% 1/10W
R872
0RH7501C622
Resistor,Chip
MCR03EZPJ752 7.5KOHM 5% 1/10W
R873
0RH7501C622
Resistor,Chip
MCR03EZPJ752 7.5KOHM 5% 1/10W
R874
0RH1003C622
Resistor,Chip
MCR03EZPJ104 100KOHM 5% 1/10W
R875
0RH5100C622
Resistor,Chip
MCR03EZPJ511 510OHM 5% 1/10W 1
R877
0RH1003C622
Resistor,Chip
MCR03EZPJ104 100KOHM 5% 1/10W
R878
0RH5100C622
Resistor,Chip
MCR03EZPJ511 510OHM 5% 1/10W 1
R888
0RH7501C622
Resistor,Chip
MCR03EZPJ752 7.5KOHM 5% 1/10W
R889
0RH7501C622
Resistor,Chip
MCR03EZPJ752 7.5KOHM 5% 1/10W
R890
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R891
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R901
0RH0752C422
Resistor,Chip
MCR03EZPF750 75OHM 1% 1/10W 16
R902
0RH0752C422
Resistor,Chip
MCR03EZPF750 75OHM 1% 1/10W 16
R903
0RH0752C422
Resistor,Chip
MCR03EZPF750 75OHM 1% 1/10W 16
R904
0RH0752C422
Resistor,Chip
MCR03EZPF750 75OHM 1% 1/10W 16
R905
0RH0752C422
Resistor,Chip
MCR03EZPF750 75OHM 1% 1/10W 16
R910
0RH0752C422
Resistor,Chip
MCR03EZPF750 75OHM 1% 1/10W 16
R911
0RH0752C422
Resistor,Chip
MCR03EZPF750 75OHM 1% 1/10W 16
R915
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R916
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R917
0RH1001D622
Resistor,Chip
MCR10EZHJ102 1KOHM 5% 1/8W 201
R918
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R919
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R920
0RH0752C422
Resistor,Chip
MCR03EZPF750 75OHM 1% 1/10W 16
R921
0RH1200C622
Resistor,Chip
MCR03EZPJ121 120OHM 5% 1/10W 1
R922
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R923
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R925
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R926
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R927
0RH5600C622
Resistor,Chip
MCR03EZPJ561 560OHM 5% 1/10W 1
R928
0RH5600C622
Resistor,Chip
MCR03EZPJ561 560OHM 5% 1/10W 1
R929
0RH5600C622
Resistor,Chip
MCR03EZPJ561 560OHM 5% 1/10W 1
R930
0RH5600C622
Resistor,Chip
MCR03EZPJ561 560OHM 5% 1/10W 1
R937
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R938
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R940
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R941
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R942
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R943
0RH5601C622
Resistor,Chip
MCR03EZPJ562 5.6KOHM 5% 1/10W
R944
0RH2201C622
Resistor,Chip
MCR03EZPJ222 2.2KOHM 5% 1/10W
R945
0RH2201C622
Resistor,Chip
MCR03EZPJ222 2.2KOHM 5% 1/10W
R946
0RH1500C622
Resistor,Chip
MCR03EZPJ151 150OHM 5% 1/10W 1
R949
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R959
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R960
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R963
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R964
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R9A1
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R9A2
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R9A3
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
X301
6212AB2359C
Crystal
HC-49/SM 3.579545MHZ 15PPM(BUB
6 - 23
REMARKS
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
X301
6212AB2359E
Crystal
HC-49/SM 3.579545MHZ 15PPM(CSC
X401
6212AB2246C
Crystal
HC-49/SM 24.576MHZ 15PPM 24.57
ZD402
0DZ025109AA
Diode,Zener
Z02W5.1Y 5.1V 4.97TO5.24V 70OH
ZD403
0DZ025109AA
Diode,Zener
Z02W5.1Y 5.1V 4.97TO5.24V 70OH
ZD405
0DZ025109AA
Diode,Zener
Z02W5.1Y 5.1V 4.97TO5.24V 70OH
ZD406
0DZ025109AA
Diode,Zener
Z02W5.1Y 5.1V 4.97TO5.24V 70OH
ZD501
0DZKE00018A
Diode,Zener
Z02W7.5V 7.5V 7TO7.9V 23OHM 20
ZD502
0DZKE00018A
Diode,Zener
Z02W7.5V 7.5V 7TO7.9V 23OHM 20
ZD503
0DZKE00018A
Diode,Zener
Z02W7.5V 7.5V 7TO7.9V 23OHM 20
ZD504
0DZKE00018A
Diode,Zener
Z02W7.5V 7.5V 7TO7.9V 23OHM 20
ZD801
0DZKE00018A
Diode,Zener
Z02W7.5V 7.5V 7TO7.9V 23OHM 20
ZD802
0DZKE00018A
Diode,Zener
Z02W7.5V 7.5V 7TO7.9V 23OHM 20
ZD809
0DZKE00018A
Diode,Zener
Z02W7.5V 7.5V 7TO7.9V 23OHM 20
ZD810
0DZKE00018A
Diode,Zener
Z02W7.5V 7.5V 7TO7.9V 23OHM 20
ZD815
EAH34895601
Diode,Zener
MMSZ6V2T1G 6.2V +-5% 10OHM 500
ZD816
0DZON00198C
Diode,Zener
MMSZ12T1G 12V +-5% 25OHM 500MW
ZD817
EAH35851801
Diode,Zener
MMSZ5V6T1G 5.6V +-5% 40OHM 500
ZD925
0DZKE00018A
Diode,Zener
Z02W7.5V 7.5V 7TO7.9V 23OHM 20
ZD926
0DZKE00018A
Diode,Zener
Z02W7.5V 7.5V 7TO7.9V 23OHM 20
ZD927
0DZKE00018A
Diode,Zener
Z02W7.5V 7.5V 7TO7.9V 23OHM 20
ZD928
0DZKE00018A
Diode,Zener
Z02W7.5V 7.5V 7TO7.9V 23OHM 20
D701
0DR202000AB
Diode,Rectifier
HER202 100V 1V 5UA 60A 50NSEC
TU701
EBL35614801
Tuner,Digital
TMVA-L102F ATSC 52MHZTO806MHZ DVD RC200 NTSC D2A CHASSIS A
REMARKS ALTERNATE
*** Frame Assembly *** A44
ADV30965813
Frame Assembly
260
MDQ31842602
Frame
MOLD HIPS 403AF RC200 HIPS 403
261
5040R-0069Q
Damper
CUTTING RUBBER DVD DV9000S OTH
267
5900R-D023D
Fan Module
FD124015LB(1N2K) 4.5KRPM DC 12
268
4930R-0558A
Holder
MOLD ABS DVD DR7000 MOLD FAN
320
MGC31842913
Panel,Rear
PRESS SECC 0.6 VCR NTSC RCA
330
MBS31842501
Chassis
PRESS SECC 0.8 RC200 PRESS 0.8
452
1SZZR-0098A
Screw,Customized
1SZZR-0098A BH + 3MM 10MM MSWR
465
1SZZR-0097N
Screw,Customized
- + 3MM 8MM MSWR FZB SIN JIN
467
1SZZR-0098X
Screw,Customized
- + 3MM 20MM MSWR FZB SIN SUN
*** Option Code Assembly *** A52
EBR32938033
Option Code Assembly
F2 15 93 CF 94 C0 04 15 (RC297
IC1301A
SAA30520704
S/W,Firmware
RC200S DVD MAIN PGM NORTH AMER
AR1301
0RR0222Q62A
Resistor,Array
RCA86TRJ22R0 22OHM 5% 1/16W 4
AR1302
0RR0222Q62A
Resistor,Array
RCA86TRJ22R0 22OHM 5% 1/16W 4
AR1303
0RR0222Q62A
Resistor,Array
RCA86TRJ22R0 22OHM 5% 1/16W 4
AR1304
0RR0222Q62A
Resistor,Array
RCA86TRJ22R0 22OHM 5% 1/16W 4
AR1305
0RR0222Q62A
Resistor,Array
RCA86TRJ22R0 22OHM 5% 1/16W 4
AR1306
0RR0222Q62A
Resistor,Array
RCA86TRJ22R0 22OHM 5% 1/16W 4
AR1701
0RRZVTA001G
Resistor,Array
RCA86TRJ51R0 51OHM 5% 1/16W 4
AR1702
0RRZVTA001G
Resistor,Array
RCA86TRJ51R0 51OHM 5% 1/16W 4
C1400
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1402
0CH1105D942
Capacitor,Ceramic,Chip
0603F105Z100CT 1uF -20TO+80% 1
C1403
0CH1105D942
Capacitor,Ceramic,Chip
0603F105Z100CT 1uF -20TO+80% 1
C1404
0CH1105D942
Capacitor,Ceramic,Chip
0603F105Z100CT 1uF -20TO+80% 1
C1803
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1804
0CH8107F611
Capacitor,AL,Chip
MV6.3TP16VC100M 100uF 20% 16V
IC1302
0ISS241610B
IC,EEPROM
S524A60X51-SC 70 16KBIT 2KX8BI
IC1400
0ISTLPH040A
IC,CMOS
74LVC08APW 1.2TO3.6V 0.01mA AN
IC1801
EAN34764701
IC,Analog Switch
TPS2051BDR 2.7V TO 5.5V 1.5MSE
L1301
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L1302
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L1303
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
6 - 24
NSP
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
L1304
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L1305
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
L1306
6200HJC102A
Filter,Bead
HB-1M2012-102JT 1000OHM 2X1.25
PML01
6630X60142A
Connector,FFC/FPC/PIC
04-6263-040-000-894+ 40P 0.50M
R1304
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16 MCR03EZPJ103 10KOHM 5% 1/10W 1
R1306
0RH1002C622
Resistor,Chip
R1307
0RH1801C422
Resistor,Chip
MCR03EZPF182 1.8KOHM 1% 1/10W
R1308
0RJ0822D477
Resistor,Chip
MCR03EZPF820 82OHM 1% 1/10W 16
R1309
0RH1801C422
Resistor,Chip
MCR03EZPF182 1.8KOHM 1% 1/10W
R1310
0RJ0822D477
Resistor,Chip
MCR03EZPF820 82OHM 1% 1/10W 16
R1311
0RH1801C422
Resistor,Chip
MCR03EZPF182 1.8KOHM 1% 1/10W
R1312
0RJ0822D477
Resistor,Chip
MCR03EZPF820 82OHM 1% 1/10W 16
R1313
0RH1801C422
Resistor,Chip
MCR03EZPF182 1.8KOHM 1% 1/10W
R1314
0RJ0822D477
Resistor,Chip
MCR03EZPF820 82OHM 1% 1/10W 16
R1315
0RH1801C422
Resistor,Chip
MCR03EZPF182 1.8KOHM 1% 1/10W
R1316
0RJ0822D477
Resistor,Chip
MCR03EZPF820 82OHM 1% 1/10W 16
R1317
0RH1801C422
Resistor,Chip
MCR03EZPF182 1.8KOHM 1% 1/10W
R1318
0RJ0822D477
Resistor,Chip
MCR03EZPF820 82OHM 1% 1/10W 16
R1335
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1360
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R1361
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R1363
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1364
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1365
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1366
0RH6800C622
Resistor,Chip
MCR03EZPJ681 680OHM 5% 1/10W 1
R1367
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R1372
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R1373
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R1376
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R1377
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R1601
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R1602
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R1603
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R1604
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R1701
0LCCE00049A
Filter,Bead
HB-1M1608-600JT 60OHM 1.6X0.8X
R1702
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R1703
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16 MCR03EZPJ220 22OHM 5% 1/10W 16
R1704
0RH0222C622
Resistor,Chip
R1705
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R1801
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R1802
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1803
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1804
0RH1502C622
Resistor,Chip
MCR03EZPJ153 15KOHM 5% 1/10W 1
R1805
0RH1502C622
Resistor,Chip
MCR03EZPJ153 15KOHM 5% 1/10W 1
AR1205
0RR1002Q62C
Resistor,Array
RCA86TRJ100R 100OHM 5% 1/16W 4
AR1206
0RR1002Q62C
Resistor,Array
RCA86TRJ100R 100OHM 5% 1/16W 4
AR1207
0RR1002Q62C
Resistor,Array
RCA86TRJ100R 100OHM 5% 1/16W 4
AR1208
0RR1002Q62C
Resistor,Array
RCA86TRJ100R 100OHM 5% 1/16W 4
AR1209
0RR1002Q62C
Resistor,Array
RCA86TRJ100R 100OHM 5% 1/16W 4
C1101
0CK475CD64A
Capacitor,Ceramic,Chip
C1608Y5V1A475MT 4.7uF 20% 10V
C1102
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1103
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1104
0CH1103K512
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V Y5
C1105
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1106
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1107
0CH1103K512
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V Y5
C1108
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
6 - 25
REMARKS
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
C1109
0CK106DC56A
Capacitor,Ceramic,Chip
0805X106K6R3CT 10uF 10% 6.3V X
C1110
0CK475CD64A
Capacitor,Ceramic,Chip
C1608Y5V1A475MT 4.7uF 20% 10V
C1111
0CK475CD64A
Capacitor,Ceramic,Chip
C1608Y5V1A475MT 4.7uF 20% 10V
C1112
0CK106DC56A
Capacitor,Ceramic,Chip
0805X106K6R3CT 10uF 10% 6.3V X
C1113
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1117
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1118
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1119
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1121
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1122
0CH7106F611
Capacitor,TA,Niobium
TSM1C106ASSR 10uF 20% 16V 1.6U
C1123
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1124
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1125
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1126
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1127
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1128
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1129
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1130
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1131
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1132
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1133
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1134
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1135
0CS226ED6DC
Capacitor,TA,Niobium
TSM1A226ASSR 22uF 20% 10V 2.2U
C1136
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1137
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1138
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1139
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1140
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1141
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1142
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1143
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1144
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1145
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1146
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1147
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1148
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1149
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1150
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1151
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1152
0CS226ED6DC
Capacitor,TA,Niobium
TSM1A226ASSR 22uF 20% 10V 2.2U
C1154
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1155
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1156
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1157
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1158
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1159
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1160
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1161
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1163
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1164
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1165
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1166
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1167
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1168
0CS226ED6DC
Capacitor,TA,Niobium
TSM1A226ASSR 22uF 20% 10V 2.2U
C1169
0CS226ED6DC
Capacitor,TA,Niobium
TSM1A226ASSR 22uF 20% 10V 2.2U
C1171
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1174
0CS337GC6DC
Capacitor,TA,Niobium
TSM0J337DSSR 330uF 20% 6.3V 20
6 - 26
REMARKS
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
C1175
0CS337GC6DC
Capacitor,TA,Niobium
TSM0J337DSSR 330uF 20% 6.3V 20
C1177
0CS226ED6DC
Capacitor,TA,Niobium
TSM1A226ASSR 22uF 20% 10V 2.2U
C1178
0CH7106F611
Capacitor,TA,Niobium
TSM1C106ASSR 10uF 20% 16V 1.6U
C1179
0CS226ED6DC
Capacitor,TA,Niobium
TSM1A226ASSR 22uF 20% 10V 2.2U
C1180
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1201
0CS226ED6DC
Capacitor,TA,Niobium
TSM1A226ASSR 22uF 20% 10V 2.2U
C1202
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1203
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1204
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1205
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1206
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1207
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1208
0CS226ED6DC
Capacitor,TA,Niobium
TSM1A226ASSR 22uF 20% 10V 2.2U
C1209
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1210
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1213
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1217
0CS226ED6DC
Capacitor,TA,Niobium
TSM1A226ASSR 22uF 20% 10V 2.2U
C1218
0CH1103K516
Capacitor,Ceramic,Chip
0805B103K500CT 10nF 10% 50V Y5
C1219
0CH1103K516
Capacitor,Ceramic,Chip
0805B103K500CT 10nF 10% 50V Y5
C1220
0CH1103K512
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V Y5
C1221
0CH1103K512
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V Y5
C1222
0CH1103K512
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V Y5
C1223
0CH1103K512
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V Y5
C1224
0CH1103K512
Capacitor,Ceramic,Chip
0603B103K500CT 10nF 10% 50V Y5
C1225
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1226
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1227
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1228
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1229
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1230
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1231
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1232
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1233
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1234
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1235
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1236
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1237
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1238
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1239
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1240
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1241
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1242
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1243
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1244
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1245
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1246
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1247
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1248
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1312
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1330
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1405
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1601
0CH1334K942
Capacitor,Ceramic,Chip
C1608Y5V1H334ZT 330nF -20TO+80
C1602
0CH4271K412
Capacitor,Ceramic,Chip
C1608C0G1H271JT 270pF 5% 50V C
C1801
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1802
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
L1101
0LCTD00005E
Inductor,Multilayer,Chip
MLF1608E100KT 10UH 10% 0V 3MA
L1102
0LCTD00005E
Inductor,Multilayer,Chip
MLF1608E100KT 10UH 10% 0V 3MA
6 - 27
REMARKS
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
L1105
0LCTD00005E
Inductor,Multilayer,Chip
MLF1608E100KT 10UH 10% 0V 3MA
L1106
0LCTD00005E
Inductor,Multilayer,Chip
MLF1608E100KT 10UH 10% 0V 3MA
L1107
0LCTD00005E
Inductor,Multilayer,Chip
MLF1608E100KT 10UH 10% 0V 3MA
L1108
0LCTD00005E
Inductor,Multilayer,Chip
MLF1608E100KT 10UH 10% 0V 3MA
L1109
0LCTD00005E
Inductor,Multilayer,Chip
MLF1608E100KT 10UH 10% 0V 3MA
L1112
0LCTD00005E
Inductor,Multilayer,Chip
MLF1608E100KT 10UH 10% 0V 3MA
L1113
0LCTD00005E
Inductor,Multilayer,Chip
MLF1608E100KT 10UH 10% 0V 3MA
L1114
0LCTD00005E
Inductor,Multilayer,Chip
MLF1608E100KT 10UH 10% 0V 3MA
L1115
0LCTD00005E
Inductor,Multilayer,Chip
MLF1608E100KT 10UH 10% 0V 3MA
L1118
0LCTD00005E
Inductor,Multilayer,Chip
MLF1608E100KT 10UH 10% 0V 3MA
PMH01
EAG35377501
Connector,BtoB
20045HS-12C00 12P 1.0MM STRAIG
PMV01
EAG35377502
Connector,BtoB
20045HS-30C00 30P 1.0MM STRAIG
PMV02
EAG35377502
Connector,BtoB
20045HS-30C00 30P 1.0MM STRAIG
R1145
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R1146
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R1147
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R1148
0RH1101C422
Resistor,Chip
MCR03EZPF112 1.1KOHM 1% 1/10W
R1149
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1 MCR03EZPJ103 10KOHM 5% 1/10W 1
R1152
0RH1002C622
Resistor,Chip
R1155
0RH1101C422
Resistor,Chip
MCR03EZPF112 1.1KOHM 1% 1/10W
R1208
0RH0562C622
Resistor,Chip
MCR03EZPJ560 56OHM 5% 1/10W 16
R1209
0RH0562C622
Resistor,Chip
MCR03EZPJ560 56OHM 5% 1/10W 16
R1210
0RH0562C622
Resistor,Chip
MCR03EZPJ560 56OHM 5% 1/10W 16
R1211
0RH0562C622
Resistor,Chip
MCR03EZPJ560 56OHM 5% 1/10W 16
R1217
0RH2002C622
Resistor,Chip
MCR03EZPJ203 20KOHM 5% 1/10W 1
R1218
0RH2002C622
Resistor,Chip
MCR03EZPJ203 20KOHM 5% 1/10W 1
R1219
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16 MCR50JZHJ000 0OHM 5% 1/2W 5025
R1220
0RJ0000H680
Resistor,Chip
R1301
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R1302
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R1303
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R1305
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R1374
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1375
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1380
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R1382
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R1401
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1402
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1403
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1404
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R1605
0RH0562C422
Resistor,Chip
MCR03EZPF560 56OHM 1% 1/10W 16
R1606
0RH0562C422
Resistor,Chip
MCR03EZPF560 56OHM 1% 1/10W 16
R1607
0RH0562C422
Resistor,Chip
MCR03EZPF560 56OHM 1% 1/10W 16
R1608
0RH0562C422
Resistor,Chip
MCR03EZPF560 56OHM 1% 1/10W 16
R1609
0RH2203C622
Resistor,Chip
MCR03EZPJ224 220KOHM 5% 1/10W
R1610
0RH5101C422
Resistor,Chip
MCR03EZPF512 5.1KOHM 1% 1/10W
R1806
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
AR1201
0RR1002Q62C
Resistor,Array
RCA86TRJ100R 100OHM 5% 1/16W 4
AR1202
0RR1002Q62C
Resistor,Array
RCA86TRJ100R 100OHM 5% 1/16W 4
AR1203
0RR1002Q62C
Resistor,Array
RCA86TRJ100R 100OHM 5% 1/16W 4
AR1204
0RR1002Q62C
Resistor,Array
RCA86TRJ100R 100OHM 5% 1/16W 4
AR1210
0RRZVTA001Z
Resistor,Array
RCA86TRJ56R0 56OHM 5% 1/16W 4
AR1211
0RRZVTA001Z
Resistor,Array
RCA86TRJ56R0 56OHM 5% 1/16W 4
AR1212
0RRZVTA001Z
Resistor,Array
RCA86TRJ56R0 56OHM 5% 1/16W 4
AR1213
0RRZVTA001Z
Resistor,Array
RCA86TRJ56R0 56OHM 5% 1/16W 4
AR1214
0RRZVTA001Z
Resistor,Array
RCA86TRJ56R0 56OHM 5% 1/16W 4
AR1215
0RRZVTA001Z
Resistor,Array
RCA86TRJ56R0 56OHM 5% 1/16W 4
6 - 28
REMARKS
S AL LOCA. NO. PART NO.
DESCRIPTION
SPECIFICATION
Resistor,Array
RCA86TRJ56R0 56OHM 5% 1/16W 4
AR1216
0RRZVTA001Z
AR1217
0RRZVTA001Z
Resistor,Array
RCA86TRJ56R0 56OHM 5% 1/16W 4
AR1218
0RR1002Q62C
Resistor,Array
RCA86TRJ100R 100OHM 5% 1/16W 4
C1114
0CH4390K412
Capacitor,Ceramic,Chip
C1608C0G1H390JT 39pF 5% 50V C0
C1115
0CH4390K412
Capacitor,Ceramic,Chip
C1608C0G1H390JT 39pF 5% 50V C0
C1170
0CH8227C621
Capacitor,AL,Chip
MV6.3TP6.3VC220M 220uF 20% 6.3
C1172
0CH8227C621
Capacitor,AL,Chip
MV6.3TP6.3VC220M 220uF 20% 6.3
C1173
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1181
0CS476IF6DC
Capacitor,TA,Niobium
TSM1C476CSSR 47uF 20% 16V 7.52
C1211
0CH8227C621
Capacitor,AL,Chip
MV6.3TP6.3VC220M 220uF 20% 6.3
C1212
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1214
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1215
0CH1104K942
Capacitor,Ceramic,Chip
0603F104Z500CT 100nF -20TO+80%
C1216
0CH8227C621
Capacitor,AL,Chip
MV6.3TP6.3VC220M 220uF 20% 6.3
IC1101
EAN35364501
IC,Video Processors
DMN-8604 B1 500MVTO5.5V,0VTO0V
IC1201
0IMMR00045B
IC,DDR SDRAM
HYB25D(C)512160CE-5 512MBIT 32
IC1203
0IPMG00017A
IC,Voltage Regulator
G2995P1X 2 TO 5.5 2.5 300MW SO
L1104
6140H-A001A
Filter,Bead
HH-1H4532-121JT 120OHM 4.5X3.2
L1110
6140H-A001A
Filter,Bead
HH-1H4532-121JT 120OHM 4.5X3.2
L1116
6140H-A001A
Filter,Bead
HH-1H4532-121JT 120OHM 4.5X3.2
L1119
0LCCE00004Y
Filter,Bead
HH-1M2012-260JT 26OHM 2.0X1.25
LED1101
0DLRH0128AA
LED,Chip
SML-010VT RED 2V 25mA 6.3mCD 6
R1101
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R1102
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R1104
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1105
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1106
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1107
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1108
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1110
0RH0000C622
Resistor,Chip
MCR03EZPJ000 0OHM 5% 1/10W 160
R1111
0RH0512C622
Resistor,Chip
MCR03EZPJ510 51OHM 5% 1/10W 16
R1112
0RH0512C622
Resistor,Chip
MCR03EZPJ510 51OHM 5% 1/10W 16
R1113
0RH0512C622
Resistor,Chip
MCR03EZPJ510 51OHM 5% 1/10W 16
R1114
0RH0512C622
Resistor,Chip
MCR03EZPJ510 51OHM 5% 1/10W 16
R1115
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1117
0RH0512C622
Resistor,Chip
MCR03EZPJ510 51OHM 5% 1/10W 16
R1118
0RH0512C622
Resistor,Chip
MCR03EZPJ510 51OHM 5% 1/10W 16
R1119
0RH0512C622
Resistor,Chip
MCR03EZPJ510 51OHM 5% 1/10W 16
R1120
0RH0512C622
Resistor,Chip
MCR03EZPJ510 51OHM 5% 1/10W 16
R1121
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R1122
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R1123
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R1124
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R1125
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1126
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1132
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R1133
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R1134
0RH3301C622
Resistor,Chip
MCR03EZPJ332 3.3KOHM 5% 1/10W
R1135
0RH3301C622
Resistor,Chip
MCR03EZPJ332 3.3KOHM 5% 1/10W
R1136
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R1137
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R1138
0RH1002C622
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1 MCR03EZPJ103 10KOHM 5% 1/10W 1
R1139
0RH1002C622
Resistor,Chip
R1141
0RH4701C622
Resistor,Chip
MCR03EZPJ472 4.7KOHM 5% 1/10W
R1143
0RH0222C622
Resistor,Chip
MCR03EZPJ220 22OHM 5% 1/10W 16
R1144
0RH1001C622
Resistor,Chip
MCR03EZPJ102 1KOHM 5% 1/10W 16
R1150
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
6 - 29
REMARKS
S AL LOCA. NO. PART NO. R1151
0RH1002C622
DESCRIPTION
SPECIFICATION
Resistor,Chip
MCR03EZPJ103 10KOHM 5% 1/10W 1
R1154
0RH9100C622
Resistor,Chip
MCR03EZPJ911 910OHM 5% 1/10W 1
R1203
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R1204
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R1207
0RH1000C622
Resistor,Chip
MCR03EZPJ101 100OHM 5% 1/10W 1
R1212
0RH0562C622
Resistor,Chip
MCR03EZPJ560 56OHM 5% 1/10W 16
R1213
0RH0562C622
Resistor,Chip
MCR03EZPJ560 56OHM 5% 1/10W 16
R1214
0RH0562C622
Resistor,Chip
MCR03EZPJ560 56OHM 5% 1/10W 16
R1215
0RH0562C622
Resistor,Chip
MCR03EZPJ560 56OHM 5% 1/10W 16
R1216
0RH0562C622
Resistor,Chip
MCR03EZPJ560 56OHM 5% 1/10W 16
X1101
6212AB2246C
Crystal
HC-49/SM 24.576MHZ 15PPM 24.57
REMARKS
*** Panel Assembly,Front *** A43
AGL30725614
Panel Assembly,Front
VCR RC297H-M NA1ULLB RC797T
280
MGC31491905
Panel,Front
MOLD HIPS 403AF VCR RC297H-M N
283
MCV31492004
Door
MOLD ABS BLACK VCR 4HD NTSC MO PRESS STS 301 0.2 COIL VCR DOO
284
442-681A
Spring
285
MCV31492403
Door
MOLD ABS BLACK VCR RC29 SUPER
286
4970R-0146A
Spring
PRESS STS 301 0.2 PLATE DR4000
6 - 30
NSP