F 1031
COMPUTER HARDWARE
Marks :
POLITEKNIK SULTAN IDRIS SHAH KEMENTERIAN PENGAJIAN TINGGI MALAYSIA PROGRAM DIPLOMA TEKNOLOGI MAKLUMAT (RANGKAIAN) F1031 - COMPUTER HARDWARE NAME: STUDENT NO: DATE: ______________________________________________________________________ LAB 1
:
COMPUTER’S EXTERNAL UNITS
OBJECTIVES : By the end of this lab, students should be able to: 1. Identify, disconnect, and reconnect the computer’s external units. 2. Remove and replace the computer’s cover and cable. 3. Identify the external connectors on the computer. 4. Explain the purpose of each. THEORY/TOPICS : The reason to Disassemble the Computer is: 1. To upgrade. 2. To repair. 3. To add additional hardwaret. The most important things to remember when disassembling a computer are 1. Where cards are located. 2. How cables are routed. 3. Orientation of cables and connectors. 4. Hardware used to secure each component. 5. Anything else that might cause confusion when reassembling. EQUIPMENT: 1. 2. 3. 4. 5.
Computer Trainer Philips Screwdriver Paper and Pencil Antistatic Wrist Strap Antistatic Bag, Medium
JULY 2008 SESSION
/
F 1031
COMPUTER HARDWARE
ACTIVITY :
1. 2. 3. 4. 5.
Make a note about the safety steps during Disassembling the Computer. Identify the mouse, keyboard, monitor, printers, and AVR units. Open the external connector component. Make a note of the connector cable at the computer’s external. Get the picture for each external connector cable and describe the function of each external connector cable in detail.
SAFETY STEPS NOTE :
JULY 2008 SESSION
F 1031
SKILLS :
RESULT/DISCUSSION :
CONCLUSION :
JULY 2008 SESSION
COMPUTER HARDWARE
F 1031
QUESTIONS: 1. How many pins that parallel port have?
2. What components that can be connect to VGA port?
3. Draw the backplane of the motherboard contain the I/O ports.
JULY 2008 SESSION
COMPUTER HARDWARE