Jsa #16-pig Launching
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Jsa #16-pig Launching as PDF for free.
More details
- Words: 410
- Pages: 1
Job Safety Analysis Sheet Job: Pig Launching
JSA Ref. No. JSA / KOC / 16 WORK Area / Equipment:
Facility:
Permit No: Date:
PERSONAL PROTECTIVE EQUIPMENT & TOOLS NEEDED FOR WORK ACTIVITIES: Hard Hat, Safety Shoes, Safety Goggles, Face Shield, Hand Gloves, Hammer, Spanner, Gas Monitor, Airline Unit, Portable Radio SEQUENCE OF BASIC JOB STEPS
POTENTIAL HAZARDS
Yes / No
PRECAUTIONS
•
Plan the work involving personnel responsible for preparation (isolation, depressurization, draining, flushing, purging etc) of the pipeline to be pigged.
•
Review Scope of Work & step by step procedure.
•
Obtain the required work permit
•
Conduct Tool Box Talk
Lack of Communication
Non-compliance of KOC - HSEMS Procedures
Incorrect Isolation Pre - work
•
Identify the valve to be closed referring P & ID.
•
Ensure the valves are closed fully.
•
Use Lock & Tag
•
Depressurize the pig barrel to safe location.
•
Drain the liquid content to trap / sump / safe location.
• Confirm the absence of pressure by opening a vent to safe location as well as observe pressure gauges reading.
Presence of Flammable / Toxic vapors
• Flush the pig barrel with water for possible presence of Pyrophoric deposit.
•
Asses the risk & Override gas detectors in case required. •
Carry out gas test for safe working area.
•
Confirm isolation valve integrity by slight opening the nearest vent / drain point. Isolation Valve Passing
Spark Generation / Fire
•
Confirm the absence of pressure at least from 2 independent sources (e.g. pressure gauges fixed at different location of pig barrel).
•
Use non sparking tools in hazardous location.
•
Keep Fire Extinguishers & fire hose in ready condition. Purge with nitrogen (if required) to remove toxic content.
Exposure to Toxic Vapor Work Splash of Hazardous Fluid
Use air line unit if required.
•
Use safety goggles& Face Shield.
•
Loosen the bolts / studs slowly.
•
Do not stand in front of pig barrel door while opening it.
• Leak & Spill
Residual Hazard
Ensure the closure of pig barrel door after loading the
pig.
•
Ensure the closure of all vents & drain valves before start pressurizing the pig barrel. • Ensure the normalization of all valves including vent, drain, pressure gauges, gas detectors, liquid trap etc. •
Ensure proper housekeeping of the area.
Additional Hazards (Other than indicated above)
JSA Done By
Name:
Designation:
KOC / ID. No.
Company:
Controlling Team:
Contract No.(If Applicable):
Signature:
Date:
JSA Ref. No. JSA / KOC / 16 WORK Area / Equipment:
Facility:
Permit No: Date:
PERSONAL PROTECTIVE EQUIPMENT & TOOLS NEEDED FOR WORK ACTIVITIES: Hard Hat, Safety Shoes, Safety Goggles, Face Shield, Hand Gloves, Hammer, Spanner, Gas Monitor, Airline Unit, Portable Radio SEQUENCE OF BASIC JOB STEPS
POTENTIAL HAZARDS
Yes / No
PRECAUTIONS
•
Plan the work involving personnel responsible for preparation (isolation, depressurization, draining, flushing, purging etc) of the pipeline to be pigged.
•
Review Scope of Work & step by step procedure.
•
Obtain the required work permit
•
Conduct Tool Box Talk
Lack of Communication
Non-compliance of KOC - HSEMS Procedures
Incorrect Isolation Pre - work
•
Identify the valve to be closed referring P & ID.
•
Ensure the valves are closed fully.
•
Use Lock & Tag
•
Depressurize the pig barrel to safe location.
•
Drain the liquid content to trap / sump / safe location.
• Confirm the absence of pressure by opening a vent to safe location as well as observe pressure gauges reading.
Presence of Flammable / Toxic vapors
• Flush the pig barrel with water for possible presence of Pyrophoric deposit.
•
Asses the risk & Override gas detectors in case required. •
Carry out gas test for safe working area.
•
Confirm isolation valve integrity by slight opening the nearest vent / drain point. Isolation Valve Passing
Spark Generation / Fire
•
Confirm the absence of pressure at least from 2 independent sources (e.g. pressure gauges fixed at different location of pig barrel).
•
Use non sparking tools in hazardous location.
•
Keep Fire Extinguishers & fire hose in ready condition. Purge with nitrogen (if required) to remove toxic content.
Exposure to Toxic Vapor Work Splash of Hazardous Fluid
Use air line unit if required.
•
Use safety goggles& Face Shield.
•
Loosen the bolts / studs slowly.
•
Do not stand in front of pig barrel door while opening it.
• Leak & Spill
Residual Hazard
Ensure the closure of pig barrel door after loading the
pig.
•
Ensure the closure of all vents & drain valves before start pressurizing the pig barrel. • Ensure the normalization of all valves including vent, drain, pressure gauges, gas detectors, liquid trap etc. •
Ensure proper housekeeping of the area.
Additional Hazards (Other than indicated above)
JSA Done By
Name:
Designation:
KOC / ID. No.
Company:
Controlling Team:
Contract No.(If Applicable):
Signature:
Date:
Related Documents
Jsa #16-pig Launching
June 2020 5
Jsa Aislamiento.xlsx
November 2019 23
Launching Weblog
November 2019 22
6575js2 Jsa
October 2019 24
Jsa Presentation
June 2020 13