Isea Otto - Pe Oil Separator - Wastewater Pre-treatment
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Isea Otto - Pe Oil Separator - Wastewater Pre-treatment as PDF for free.
More details
- Words: 495
- Pages: 2
OT TO-PE
PRODUCT CATEGORY
OIL SEPARATOR PRODUCT NAME
OTTO-PE APPLICATION
WASTEWATER AND RAIN WATER FROM CAR WORKSHOPS, PETROL STATIONS AND CAR PARKS. CAPACITY
FROM 1.5 TO 6.0 LITER PER SECOND E NT E
D
N
CE
P
AT
Certified Quality System
L I CE
PLANT DESCRIPTION The OTTO PE oil and hydrocarbon separator entirely made in polyethylene and designed for underground installation. This system is suitable for the treatment of waste waters containing oils from parking areas, mechanical workshops and petrol stations. In some particular cases it is also installed upstream of the mains sewage treatment. . . .
INSTALLATION
MAINTENANCE
80
A sand trap, which retains sand and inert material with a high specific gravity; A coalescent filter, made an oil absorbent cushion suitable for the removal of oil emulsions; An automatic closing device, which automatically closes the outlet pipe when the oil and hydrocarbons storage chamber is full to avoid the escape of such materials to the final effluent;
.
An oil and hydrocarbons storage chamber, in which separated oils and hydrocarbons are kept until removed and disposed in designated disposal areas.
EXCAVATION
Dig a hole of appropriate dimensions. The bottom of the excavation must be leveled and compacted with a 10 cm layer of fine sand (grain size 0-5 mm).
CONNECTION
Position the plant and connect the wastewater outlet pipe of the inlet of the OTTO PE. Connect the discharge pipe from the outlet of the OTTO PE to an inspection chamber.
BACKFILLING
Fill the OTTO PE with clean water before backfilling to avoid collapse of the polyethylene structure during backfilling. Once the two main compartments are full, dump sand around the tank and level it. For a walk-on solution build a 5 cm thick light concrete layer on top of the tank and finish with a 40 cm thick soil. For a drive-on solution a reinforced concrete slab is required to protect the tank. Accessible manholes are required for inspection and maintenance.
Verify that the plant is correctly installed and positioned in order to allow a regular gravity flow. Periodically get a water sample from the system outlet for analysis. Clean the sand trap regularly to ensure a steady flow in the system. Clean the coalescent filter periodically and check the level of the oil and hydrocarbons collecting tank.
PE lead
ØU
ØE
H
HU
HE
coalescent filter
sand trap
PVC connections
L automatic closing devices PE hydrocarbons separator
P
DIMENSIONS & DESIGN
storage volume
PE cover
OTTO-PE - Oil separator Code
Item
l
Rate (l/s.)
L (cm)
(cm)
H (cm)
HE (cm)
HU (cm)
øE (mm)
øU (mm)
0880
OTTO-PE 015
1.5
185
80
82,5
58
53
125
125
0881
OTTO-PE 030
3.0
210
80
82,5
58
53
125
125
0882
OTTO-PE 045
4.5
218
100
102,5
77
72
125
140
0883
OTTO-PE 060
6.0
233
100
102,5
77
72
140
140
INFO ISEA guarantees that discharge water treated with OTTO PE conforms to the provisions of DIN 1999.
81
PRODUCT CATEGORY
OIL SEPARATOR PRODUCT NAME
OTTO-PE APPLICATION
WASTEWATER AND RAIN WATER FROM CAR WORKSHOPS, PETROL STATIONS AND CAR PARKS. CAPACITY
FROM 1.5 TO 6.0 LITER PER SECOND E NT E
D
N
CE
P
AT
Certified Quality System
L I CE
PLANT DESCRIPTION The OTTO PE oil and hydrocarbon separator entirely made in polyethylene and designed for underground installation. This system is suitable for the treatment of waste waters containing oils from parking areas, mechanical workshops and petrol stations. In some particular cases it is also installed upstream of the mains sewage treatment. . . .
INSTALLATION
MAINTENANCE
80
A sand trap, which retains sand and inert material with a high specific gravity; A coalescent filter, made an oil absorbent cushion suitable for the removal of oil emulsions; An automatic closing device, which automatically closes the outlet pipe when the oil and hydrocarbons storage chamber is full to avoid the escape of such materials to the final effluent;
.
An oil and hydrocarbons storage chamber, in which separated oils and hydrocarbons are kept until removed and disposed in designated disposal areas.
EXCAVATION
Dig a hole of appropriate dimensions. The bottom of the excavation must be leveled and compacted with a 10 cm layer of fine sand (grain size 0-5 mm).
CONNECTION
Position the plant and connect the wastewater outlet pipe of the inlet of the OTTO PE. Connect the discharge pipe from the outlet of the OTTO PE to an inspection chamber.
BACKFILLING
Fill the OTTO PE with clean water before backfilling to avoid collapse of the polyethylene structure during backfilling. Once the two main compartments are full, dump sand around the tank and level it. For a walk-on solution build a 5 cm thick light concrete layer on top of the tank and finish with a 40 cm thick soil. For a drive-on solution a reinforced concrete slab is required to protect the tank. Accessible manholes are required for inspection and maintenance.
Verify that the plant is correctly installed and positioned in order to allow a regular gravity flow. Periodically get a water sample from the system outlet for analysis. Clean the sand trap regularly to ensure a steady flow in the system. Clean the coalescent filter periodically and check the level of the oil and hydrocarbons collecting tank.
PE lead
ØU
ØE
H
HU
HE
coalescent filter
sand trap
PVC connections
L automatic closing devices PE hydrocarbons separator
P
DIMENSIONS & DESIGN
storage volume
PE cover
OTTO-PE - Oil separator Code
Item
l
Rate (l/s.)
L (cm)
(cm)
H (cm)
HE (cm)
HU (cm)
øE (mm)
øU (mm)
0880
OTTO-PE 015
1.5
185
80
82,5
58
53
125
125
0881
OTTO-PE 030
3.0
210
80
82,5
58
53
125
125
0882
OTTO-PE 045
4.5
218
100
102,5
77
72
125
140
0883
OTTO-PE 060
6.0
233
100
102,5
77
72
140
140
INFO ISEA guarantees that discharge water treated with OTTO PE conforms to the provisions of DIN 1999.
81
Related Documents
A) Montaza -separator Otto-pe 015 Sa Koalescentom
June 2020 13More Documents from "AG-Metal /Tretman Otpadnih Voda/Wastewater Treatment"
