How Hydro Power Plants Work

How Hydropower Plants Work by Kevin Bonsor

Worldwide, hydropower plants produce about 24 percent of the world's electricity and supply more than 1 billion people with power. The world's hydropower plants output a combined total of 675,000 megawatts, the energy equivalent of 3.6 billion barrels of oil, according to the National Renewable Energy Laboratory. There are more than 2,000 hydropower plants operating in the United States, making hydropower the country's largest renewable energy source.

Photo courtesy U.S. Bureau of Reclamation

Outflow during a test at the hydropower plant at the Hoover Dam, located on the Nevada-Arizona border

In this edition of HowStuffWorks, we'll take a look at how falling water creates energy and learn about the hydrologic cycle that creates the water flow essential for hydropower. You will also get a glimpse at one unique application of hydropower that may affect your daily life.

The Power of Water When watching a river roll by, it's hard to imagine the force it's carrying. If you have ever been white-water rafting, then you've felt a small part of the river's power. White-water rapids are created as a river, carrying a large amount of water downhill, bottlenecks through a narrow passageway. As the river is forced through this opening, its flow quickens. Floods are another example of how much force a tremendous volume of water can have. Hydropower plants harness water's energy and use simple mechanics to convert that energy into electricity. Hydropower plants are actually based on a rather simple concept -- water flowing through a dam turns a turbine, which turns a generator. Here are the basic components of a conventional hydropower plant:

• • •

• •

Dam - Most hydropower plants rely on a dam that holds back water, creating a large reservoir. Often, this reservoir is used as a recreational lake, such as Lake Roosevelt at the Grand Coulee Dam in Washington State. Intake - Gates on the dam open and gravity pulls the water through the penstock, a pipeline that leads to the turbine. Water builds up pressure as it flows through this pipe. Turbine - The water strikes and turns the large blades of a turbine, which is attached to a generator above it by way of a shaft. The most common type of turbine for hydropower plants is the Francis Turbine, which looks like a big disc with curved blades. A turbine can weigh as much as 172 tons and turn at a rate of 90 revolutions per minute (rpm), according to the Foundation for Water & Energy Education (FWEE). Generators - As the turbine blades turn, so do a series of magnets inside the generator. Giant magnets rotate past copper coils, producing alternating current (AC) by moving electrons. (You'll learn more about how the generator works later.) Transformer - The transformer inside the powerhouse takes the AC and converts it

• •

to higher-voltage current. Power lines - Out of every power plant come four wires: the three phases of power being produced simultaneously plus a neutral or ground common to all three. (Read How Power Distribution Grids Work to learn more about power line transmission.) Outflow - Used water is carried through pipelines, called tailraces, and re-enters the river downstream.

Photo courtesy U.S. Bureau of Reclamation

The shaft that connects the turbine and generator

The water in the reservoir is considered stored energy. When the gates open, the water flowing through the penstock becomes kinetic energy because it's in motion. The amount of electricity that is generated is determined by several factors. Two of those factors are the volume of water flow and the amount of hydraulic head. The head refers to the distance between the water surface and the turbines. As the head and flow increase, so does the electricity generated. The head is usually dependent upon the amount of water in the reservoir.

Pumped Storage The majority of hydropower plants work in the manner described above. However, there's another type of hydropower plant, called the pumped-storage plant. In a conventional hydropower plant, the water from the reservoir flows through the plant, exits and is carried

down stream. A pumped-storage plant has two reservoirs: • •

Upper reservoir - Like a conventional hydropower plant, a dam creates a reservoir. The water in this reservoir flows through the hydropower plant to create electricity. Lower reservoir - Water exiting the hydropower plant flows into a lower reservoir rather than re-entering the river and flowing downstream.

Using a reversible turbine, the plant can pump water back to the upper reservoir. This is done in off-peak hours. Essentially, the second reservoir refills the upper reservoir. By pumping water back to the upper reservoir, the plant has more water to generate electricity during periods of peak consumption.

Inside the Generator The heart of the hydroelectric power plant is the generator. Most hydropower plants have several of these generators.

Photo courtesy U.S. Bureau of Reclamation

The giant generators at Hoover Dam produce more than 2,000 megawatts.

The generator, as you might have guessed, generates the electricity. The basic process of generating electricity in this manner is to rotate a series of magnets inside coils of wire. This process moves electrons, which produces electrical current. The Hoover Dam has a total of 17 generators, each of which can generate up to 133 megawatts. The total capacity of the Hoover Dam hydropower plant is 2,074 megawatts. Each generator is made of certain basic parts: •

Shaft

• • •

Excitor Rotor Stator

As the turbine turns, the excitor sends an electrical current to the rotor. The rotor is a series of large electromagnets that spins inside a tightly-wound coil of copper wire, called the stator. The magnetic field between the coil and the magnets creates an electric current. In the Hoover Dam, a current of 16,500 volts moves from the generator to the transformer, where the current ramps up to 230,000 volts before being transmitted.

Hydrologic Cycle Hydropower plants take advantage of a naturally occurring, continuous process -- the process that causes rain to fall and rivers to rise. Every day, our planet loses a small amount of water through the atmosphere as ultraviolet rays break water molecules apart. But at the same time, new water is emitted from the inner part of the Earth through volcanic activity. The amount of water created and the amount of water lost is about the same. At any one time, the world's total volume of water is in many different forms. It can be liquid, as in oceans, rivers and rain; solid, as in glaciers; or gaseous, as in the invisible water vapor in the air. Water changes states as it is moved around the planet by wind currents. Wind currents are generated by the heating activity of the sun. Air-current cycles are created by the sun shining more on the equator than on other areas of the planet. Air-current cycles drive the Earth's water supply through a cycle of its own, called the hydrologic cycle. As the sun heats liquid water, the water evaporates into vapor in the air. The sun heats the air, causing the air to rise in the atmosphere. The air is colder higher up, so as the water vapor rises, it cools, condensing into droplets. When enough droplets accumulate in one area, the droplets may become heavy enough to fall back to Earth as precipitation.

The hydrologic cycle

The hydrologic cycle is important to hydropower plants because they depend on water flow. If there is a lack of rain near the plant, water won't collect upstream. With no water collecting up stream, less water flows through the hydropower plant and less electricity is generated.

Hydroelectric Footwear The basic idea of hydropower is to use the power of a moving liquid to turn a turbine blade. Typically, a large dam has to be built in the middle of a river to perform this function. A new invention is capitalizing on the idea of hydropower on a much smaller scale to provide electricity for portable electronic devices. Inventor Robert Komarechka of Ontario, Canada, has come up with the idea of placing small hydropower generators into the soles of shoes. He believes these micro-turbines will generate enough electricity to power almost any gadget. In May 2001, Komarechka received a patent for his unique foot-powered device.

Photo courtesy U.S. Patent and Trademark Office

Image from patent No. 6,239,501: Footwear with hydroelectric generator assembly

There's a very basic principle to how we walk: The foot falls heel-to-toe during each step. As your foot lands on the ground, force is brought down through your heel. When you prepare for your next step, you roll your foot forward, so the force is transferred to the ball of your foot. Komarechka apparently noticed this basic principle of walking and has developed an idea to harness the power of this everyday activity. There are five parts to Komarechka's "footwear with hydroelectric generator assembly," as described in its patent: • • • •

Fluid - The system will use an electrically conductive fluid. Sacs to hold the fluid - One sac is placed in the heel and another in the toe section of the shoe. Conduits - Conduits connect each sac to a microgenerator. Turbine - As water moves back and forth in the sole, it moves the blades of a tiny

•

turbine. Microgenerator - The generator is located between the two fluid-filled sacs, and includes a vane rotor, which drives a shaft and turns the generator.

As a person walks, the compression of the fluid in the sac located in the shoe's heel will force fluid through the conduit and into the hydroelectric generator module. As the user continues to walk, the heel will be lifted and downward pressure will be exerted on the sac under the ball of the person's foot. The movement of the fluid will rotate the rotor and shaft to produce electricity. An exterior socket will be provided to connect wires to a portable device. A power-control output unit may also be provided to be worn on the user's belt. Electronic devices can then be attached to this power-control output unit, which will provide an steady supply of electricity. "With the increase in the number of battery-powered, portable devices," the patent reads,"there is an increasing need to provide a long-lasting, adaptable, efficient electrical source." Komarechka expects that his device will be used for powering portable computers, cell phones, CD players, GPS receivers and two-way radios.

Source: http://people.howstuffworks.com/hydropower-plant.htm

Hydroelectric power: How it works So just how do we get electricity from water? Actually, hydroelectric and coal-fired power plants produce electricity in a similar way. In both cases a power source is used to turn a propeller-like piece called a turbine, which then turns a metal shaft in an electric generator , which is the motor that produces electricity. A coal-fired power plant uses steam to turn the turbine blades; whereas a hydroelectric plant uses falling water to turn the turbine. The results are the same. Take a look at this diagram (courtesy of the Tennessee Valley Authority) of a hydroelectric power plant to see the details: The theory is to build a dam on a large river that has a large drop in elevation (there are not many hydroelectric plants in Kansas or

Florida). The dam stores lots of water behind it in the reservoir. Near the bottom of the dam wall there is the water intake. Gravity causes it to fall through the penstock inside the dam. At the end of the penstock there is a turbine propeller, which is turned by the moving water. The shaft from the turbine goes up into the generator, which produces the power. Power lines are connected to the generator that carry electricity to your home and mine. The water continues past the propeller through the tailrace into the river past the dam. By the way, it is not a good idea to be playing in the water right below a dam when water is released! This diagram of a hydroelectric generator is courtesy of U.S. Army Corps of Engineers. As to how this generator works, the Corps of Engineers explains it this way: "A hydraulic turbine converts the energy of flowing water into mechanical energy. A hydroelectric generator converts this mechanical energy into electricity. The operation of a generator is based on the principles discovered by Faraday. He found that when a magnet is moved past a conductor, it causes electricity to flow. In a large generator, electromagnets are made by circulating direct current through loops of wire wound around stacks of magnetic steel laminations. These are called field poles, and are mounted on the perimeter of the rotor. The rotor is attached to the turbine shaft, and rotates at a fixed speed. When the rotor turns, it causes the field poles (the electromagnets) to move past the conductors mounted in the stator. This, in turn, causes electricity to flow and a voltage to develop at the generator output terminals."