Hose Fittings

Hose Fittings the portion of a fitting (coupling) that is inserted into the hose, usually comprised of two or more radial serrations or ridges designed to form a redundant seal between the hose and fitting. Barbed and ferrule fitting: a two-piece hose fitting comprised of a barbed insert (nipple), normally with peripheral ridges or backward-slanted barbs, for inserting into a hose and a ferrule, usually crimped or swaged. Barb:

Serrations: bumps,

barbs, corrugations, or other features that increase the holding power of the device Shank: that portion of a fitting, which is inserted into the bore of a hose. Banjo Fitting- a through bolted designed featuring a hollow circle or "donut" attached to one end of the fitting barb so that the inner diameter is along the hose axis. Barbed inserts- for low or medium pressure air, water and fluids. Machined brass with serrated shank; NPT or NPTF male and solid female, and NPSM swivel female; thread seal to NPT or NPTF female, and ball end or washer seal to NPSM female. Attached with bands or clamps.

EQUAL LEG COUPLER

REDUCTION COUPLER

THREAD BARB ADAPTERS

EQUAL LEG ELBOW

THREAD BARB ELBOWS

EQUAL LEG TEES

THREAD BARB TEE

Male Adapter

Female Adapter

Connector Barbed Tee

GENERAL ATTRIBUTES:

Nipple Adapter Male 90° Elbow

Male Tee

Male 45° Elbow

Swivel Female Flare Adapter

Swivel Female Adapter Ball End

for details refer pipe fittings

END CONNECTION SIZE: End

connection size is respective connection size of

fitting will be in IN/MM CONNECTION TYPE:

Possible values are MALE/FAMALE, FACE x FACE.

THREAD TYPE: Indicates

type of thread that fitting (NPT, FPT, MPT, NPS, NPSM,

BSP, BSPT, BSPP) SCHEDULE NO: Indicates the thickness of the fitting when using diameter (5, 5s, 10, 40, 40S, 40 XS, 80,XXS, Std, 120 etc.) Details PRESSURE RATING: Indicates bar, KN) FLARE ANGLE: Indicates

with inside

the maximum allowable pressure of the fitting (PSI,

the flare angle of the flared fittings. (37°,45°)

EXTERNAL COATING: Indicates

the External Coating on the fitting.(Black, Galvanized, Zinc Chromate plated) END CONNECTION: Threaded,

Flanged, Butt Weld, Socket Weld, Solder Joint, Grooved, JIC, 45° flared, Solvent Weld. MATERIAL: MS,

lined, PVC.

SS, CI, CS, Forged Steel, Brass, Bronze, Copper, Aluminum, PTFE