Hardware Tools.pptx

At the end of the lesson, The learners are expected to: 1.Plan and prepare tasks to be undertaken • Identify tasks to be undertaken properly • Identify and select appropriate hardware tools according to the task requirements 2.Prepare tools • Check appropriate hardware tools for proper operation and safety

TOOLS Tools are equipment that you use with your hands to make or repair something.

COMPUTE R HARWARE SERVICIN G TOOLS

ELECTRO-STATIC DISCHARGE (ESD) TOOLS

HAND TOOLS

Name of Tools

Flashlight

Classifications of Tools

Use of Tools

Diagnostic Tool Used to light up areas that you cannot see well

Needle-Nose Pliers

CLEANING TOOLS

DIAGNOSTIC TOOLS

Loopback Adapter

Loopback adapter

Name of Tools

Loopback Adapter

Classifications of Tools

Use of Tools

Diagnostic Tool Used to test the functionality of computer ports

CRUMPLE AND SHOOT Mechanics: 1. The teacher will show pictures, statement/situation with the aid of PowerPoint presentation. 2. The members of each group will work together to identify and select the appropriate tool to use. 3. One member of the group will write their collaborated answer on a sheet of paper. 4. Once the teacher ask them to show their answers, each group will raise their answers 5. Only the groups who got the correct answer will have the chance to make a shoot in the basket located on the teacher’s table 6. A representative from each group who got the correct answer will crumple the paper where they have written their answer and should stand 2 meters away from the basket 7. To earn a point the representative must shoot the paper inside the basket. It must be done in only one attempt. 8. The group with the highest point is the winner of the game.

Criteria

3

2

1

Always listened to Listeni respectfully the perspectives ng Skills of others

Usually listened respectfully to the perspectives of others

Often listened respectfully to the perspectives of others

Rarely listened respectfully to the perspectives of others

All group members participated in the activity

Almost all group members participated in the activity

Not all group members participated in the activity

Only few group members participated in the activity

Can easily recognize, Knowl analyze and give edge the answer to the gained given problem

Can usually recognize, analyze and give the answer to the given problem

Can often recognize, analyze and give the answer to the given problem

Can rarely recognize, analyze and give the answer to the given problem

Team work

4

Legend: Excellent: 14-16 Very good: 11-13 Good: 8-10 Poor: 0-7

CRUMPLE SHOOT

AND

Briane is a computer technician, while he is working, he noticed that the motherboard of the computer he is repairing also needs clean up. What tool do you think Briane will use?

Mr. Capili’s lesson today is about assembling and disassembling of PC. His class is about to work with the actual components and needs to open a system unit with crosshead screws or positive signed screws on its case. What tool will they use to open the case of the system unit?

To check the integrity, resistance, current, and input/output voltage flowing in a circuit, John used this tool to do the job. This tool is essential specially when repairing a system unit.

Mr. Ocenar dropped the tiny screw on a hard to reach area of the system unit while he is working and doing repairs, to make it easy for him to get it back what tool will you give him?

For easy retrievals of the screws Briane removed as he disassembled the system unit, he used this to prevent the components from getting mixed together.

Mark works in a computer shop, he noticed that the wires and network cables of the computers are messed up and connections are untraceable. Mark wants to improve the set up of the wires and cable to make it look neat and safe. What would you suggest Mark to use?

It is Jayson’s first time to repair a laptop computer. He usually encounters screws with positive and negative signs on its head, until he assemble a laptop with star-like head screws. What do you think will Jayson use to disassemble the components?

Mr. Gipan noticed that his system unit is not working, to check the continuity if an electric current can still flow in the circuit motherboard he used this tool. What tool do you think did Mr. Gipan use?

To prevent static electricity from building up when working with computer components, this tool can be of great help.

Anthony wants to make sure that all the ports of the computer system is working, what tool would you suggest Anthony to use?

Assignment: 1. What are the safety measures when doing computer hardware servicing?