S199M24 24-Fiber Fusion Splicer Key Features: • Your ultimate splicing solution! Capable of splicing 24-fiber ribbons, the most popular ribbon for high-count cables. • Optimized for all major fiber types and manufacturers (SM, NZDSF, etc.). • Your total solution! Capable of splicing 24,16,12,10,8,6,4,2,1 fibers. • Typical loss result of 0.03dB for single mode fibers! • Same small, compact size as the S199M12 and S199S!
Specifications Splicing Method:
Clad alignment, fixed v-groove
Fiber Types:
Ribbon and single fibers (ribbon: 24,16,12,10,8,6,4,2 fibers)
Average Loss:
SM: 0.03dB, NZDSF: 0.05-0.09 (depends on brand)
Splice Time:
48s for 24f ribbon
Heating Time:
100s
Applicable Fibers:
SM: 1,2,4,6,8,10,12,16,24 MM: 1,2,4,8,12 DS: 1,2,4,8 NZDS (TrueWave® & Leaf®):
1,4,8,12,24
Zero Water Peak Fibers (AllWave & MetroCor®): 1,2,4,6,8,10,12,16,24 ®
Electrodes:
Long: for splicing up to 12f; Short: for splicing 16f and 24f ribbons
Programs:
32 splice programs; 10 heat shrink programs
Splice Memory:
90-100 splices for 24f ribbon
Coating Diameters:
Ribbon: 300-400µm; Single Fibers: 250, 900µm
Cladding Diameter:
125µm
Cleave Length:
10mm
Proof Test Strength:
200gf
Dimensions/Weight:
6" x 6" x 6"/7.5lbs - 150 x 150 x 150mm/3.4kg
Monitor:
5" TFT color LCD monitor with 11.3x magnification (external RCA jack for NTSC video signal)
Power Supply:
85-264 VAC External/50-60Hz, 10-16 VDC External (AC adapter or battery can be inserted into main body)
Operating Conditions:
-10° to 50°C, 0 to 95% humidity, non-condensing
Storage Conditions:
-40° to 80°C, 0 to 95% humidity, non-condensing
Splice Data Output:
RS232C
200 Westpark Drive Suite 190 Peachtree City, GA 30269 770-487-1234 www.FurukawaAmerica.com