Fabric Put-up And Spreading Modes

Fabric Put-up and Spreading Modes Fabric Put-up; Open and Rolled

Fabric is flat open with the face to the inside of the roll Right click on the image and select "save image" to save to your local drive

Fabric Put-up; Folded and Rolled

Fabric is folded on one end and both selvedges are superimposed on the other edge of the roll Face is to the inside of each folded layer Right click on the image and select "save image" to save to your local drive

Fabric Put-up; Tubular Fabric Rolled

Tubular Fabric from a circular knitting machine is rolled up Face is to the inside of the roll, and there is a fold at each end of the roll Right click on the image and select "save image" to save to your local drive

Spreading Mode; Open Fabric, Face One Way, Nap One Way (F/O/W, N/O/W)

Spreading starts at one end of the table on each ply Right click on the image and select "save image" to save to your local drive

Spreading Mode; Open Fabric, Face One Way, Nap UP and Down (F/O/W, N/U/D)

Spreading starts at one end of the table. Fabric is cut at the far end, rotated 180 degrees, then spread to the beginning. The Fabric is cut and rotated 180 degrees then the process is repeated. Right click on the image and select "save image" to save to your local drive

Spreading Mode; Open Fabric, Face to Face, Nap One Way (F/F, N/O/W)

Spreading starts at one end of the table. Fabric is cut at the far end, the roll is brought to the beginning of the table, rotated 180 degrees, then spread to the far end again. The Fabric is cut at the far end, brought back to the beginning of the table, rotated 180 degrees then the process is repeated. Right click on the image and select "save image" to save to your local drive

Spreading Mode; Open Fabric, Face to Face, Nap Up and Down (F/F, N/U/D)

Spreading starts at one end of the table. Fabric is folded over at the far end, then spreading continues back to the beginning of the table. The Fabric is folded over then the process is repeated. Right click on the image and select "save image" to save to your local drive

Spreading Mode; Folded Fabric, Face to Face, Nap One Way (F/F, N/O/W)

Folded fabric spreading starts at one end of the table. Fabric is cut at the far end, then returned to the beginning. Then the process is repeated. On the control side of the table the Fold is superimposed one layer on the previous layer. This process is also used on tubular rolled fabric Right click on the image and select "save image" to save to your local drive

Spreading Mode; Folded Fabric, Face to Face, Nap Up and Down (F/F, N/U/D)

Spreading starts at one end of the table. Fabric is spread to the far end of the table. The fabric is folded over, then spread back to the beginning. The fabric is folded over, then the process is repeated. On the control side of the table the Fold is superimposed one layer on the previous layer. This process is also used on tubular rolled fabric Right click on the image and select "save image" to save to your local drive