F12

TM Oily Water Separation & Treatment Cyclonic Technology INTRODUCTION Years of experience in the oil and gas industry has led to the technology transfer of a unique oil/water separation technology. CycloForceTM is a cyclonic based separation system, returning the most cost-effective solution for tough oily water treatment applications. Applied in a variety of industrial applications the CycloForceTM system represents state-of-the-art water clean up technology. HOW IT WORKS Oil separation occurs when the water/oil effluent enters the cyclone and begins to spin under a centrifugal force which is in the order of 800 times the force of gravity. This force cause the two immiscible liquids (oil and water) to separate. The heavier water phase is forced outward toward the cyclone wall, and the lighter oil phase migrates toward the centre core. The design of the cyclone causes the water phase to be sent in one direction and the oil phase in the opposite direction. With no moving parts the process is low maintenance, simple and effective with separation occurring during the 2-3 seconds it takes for the water/oil mix to pass through the cyclone.

Applicable industries include:

7,000 l/hr & 1,500 l/hr cyclonic separation system skids

BENEFITS • Most efficient, and cost effective

• Oil Spill Control / Fluids Treatment; • Vehicle Wash Water Reclaim; • Service Station Service Bays and Fuel Dispensing; • Mining Operations; • Dairy & Food Manufacturing;

solution to water treatment problems

• Clean water with no chemicals • Effluent can be recycled for continuous treatment

• Compact, 10% the size and weight of conventional systems

• Bilge Water & Marine Transport Facilities;

• Hydrocyclone has no moving

• Oil Tanks Farms & Fuel Depots;

• Modular add-on features

• Waste Oil Collection;

parts

• Refinery & Petrochemical; • Power Stations; • Cooling Towers; • Solvent Extraction Operations; • Manufacturing Workshops; Cyclonic separation system skid with oil separator, de-sanding separator, low shear progressive cavity pump, strainer and control panel (not visible) Vehicle wash water aeration system - allows water re-cycle

CycloForceTM allows customers to achie ve higher production efficiencies, cleaner environmental outcomes while meeting government regulations.

OPERATIONS • CycloForceTM typically separates over 99% by volume of the lighter free oil phase with particles from 10 to 20 microns and larger

• CycloForceTM will clean water in the range of 10 to 30 ppm. Suspended solids will be less than 40 ppm

• Performance predictions made available with our proprietary software simulation packages • CycloForceTM Low Pressure System models 1,500, 3,000 and 4,500 l/hr. Consists of cyclonic oil water separator, air operated pump, strainer and set-up for either manual or automatic operation

• CycloForceTM High Pressure System models 4,500, 7,000 and 12,000 l/hr. Consists of cyclonic oil water separator, de-sanding separator, progressive cavity pump, strainer, control box and set-up for manual or automatic operation

• Add on modular units include, water re-use aeration tanks, oil collection tanks, skimmers and Collected Oil phase

Clean water phase

Oil/water feed

various control systems

• Global GreenTM Quick Break Detergent & heavy duty degreaser is also available to provide a full system solution for various wash water cleaning applications Global Grooves PT 11748 B, Jalan Besar Paka, 23100 Paka, Terengganu Darul Iman. Tel : 609 828 6240 Fax : 609 828 6242 Email : [email protected]