BELT SKIMMER FREE HANGING BELT NO BOTTOM TENSION PULLEY REQUIRED
The new Slimline Belt Skimmer makes bottom tension drums/pulleys as shown on left OBSOLETE.
FEATURES • Polypropylene belt – long life • No stress cracking at belt join as with stainless steel belts • Free hanging belt 200mm wide • Belt can fit through small openings which is not possible with conventional belt skimmers • Diesel pick-up 50 litres per hour • Oil pick-up 120 litres per hour • Easily hung above sump, tank or pond on arm or chain
SPECIFICATIONS Housing Dimensions Drive rollers Drive Electric motor Weight Oil drain Discharge hose Discharge hose Belt Belt length Operation
Product codes
Stainless steel housing, electric motor, discharge hose connection
200mm wide continuous polypropylene belt
Stainless steel L: 420mm W: 210mm H: 800mm Urethane Electric – single phase or 3 phase Single phase: IP54, 3 Phase: IP55 plus others available 25 kgs Gravity 38mm 5 metres PVC 38mm Polypropylene Standard – 5 metres (1.75 m below oil outlet) other lengths available Continuous oileophillic belt driven through two rollers picks up oil from sumps, tanks, etc. Oil is squeezed from the belt as it passes through the rollers. Recovered oil drains from the bottom of the skimmer via a hose or pipe. (BSSP) Single phase (BS3P) Three phase
Global Grooves PT 11748 B, Jalan Besar Paka, 23100 Paka, Terengganu Darul Iman. Tel : 609 828 6240 Fax : 609 828 6242 Email :
[email protected]