Exercise Three. John Allen
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Exercise Three. John Allen as PDF for free.
More details
- Words: 721
- Pages: 7
Electricity Generation and Economic use of Electricity Representation Theory John Allen 0556475
I would like to create a free small document about how to be ecological.
This could be used to demonstrate how generate electrictiy using ecological methods such as wind, solar, geothermal or biomass. It would mainly be targeted towards. It could also inform people about how much electricty these methods could produce, how much they cost and how much money they could potentially save a householder.
It could also inform people about how to make better use of the elctricity which comes into your house. The most ecological forms of fixtures, the best forms of insulation and the best time to use certain appliances within the home.
The whole document would be aimed towards saving the householder money as this is a language that everone understands.
Table of Contents:
Font Page: Title Page
Second Page (Back of Front Page): Wind Energy
Third Page: Solar Energy
Fourth Page: Geothermal/Biomass
Fith Page(Back of Third Page): Insulation
Sixth Page(Back of Fourth Page): General Information
Because of the nature of this leaflet and because it is aimed to be given out for free it would make sense to make it would make sense to make it cheaply and ecologically.
The document would consits of one small piece of recycled paper which could be folded into three sections.
The recycled paper counld be bought or it could be made. The size of the document would vary depending if the paper was recycled or bought. You can buy recycled paper from rps.gn.apc.org at a cost of 31.20 pounds for 500 sheets of A4 which could then be cut in half so that each A4 page could produce 2 leaflets of size: 105mm x 297mm.
If you wish you could recycle the paper yourself. This used a wire hanger and so is decided by the size of the hanger which could be 200mm x 450mm. It could also be made to the same size as the paper which you could buy 105mm x 297mm. Recycled paper can be made from old newspaper, following the instructions below. You will need: * a food processor or an old blender * an electric iron * an old wire hanger * an old pair of tights * newspaper or other paper, torn into 2-inch squares * white glue * water * an insect screen or strainer (optional) * food coloring (optional) * a big sink or tub filled with 4 inches of water
Step One: Make a frame out of the coat hanger. You’ll need a frame for each piece of paper you make. Stretch the hanger and bend it into a rectangle/square shape. Take one leg of the tights and stretch it carefully over the hanger frame. Make sure it is tight and flat.
Step Two: Put a handful of the torn up paper and some water into the food processor or blender. Blend the mixture on high until it becomes mushy. Keep adding paper and water until you have a big gray blob. You may have to add a little more water to keep things moving smoothly. Keep the food processor on until all the paper has disappeared. Then leave it on for 2 minutes. For some color, add a handful of brown or red onion skin (not the onion itself, just the papery outer skin).
Step Three: Put 2 tablespoons of white glue in the sink water and add all of the paper pulp you just made. Mix it really well. Use your hands.
Step Four: Scoop the frame to the bottom of the sink, then lift it slowly. (Count to 20 slowly while you are lifting.) Let the water drain out for about a minute.
Step Five: Hang the frames on a clothesline or put them out in the sun. Wait until they are completely dry with no dampness at all. You can then gently peel off the paper.
Step Six: Use the iron, set on the hottest setting, to steam out your paper. You can keep making paper until the pulp is all strained out of the sink. Mix up the sink every time you make a new piece.
PAGE 2
PAGE 3
PAGE 5
PAGE
(BACK OF PAGE 2)
(BACK OF P
3
PAGE 4
6 PAGE 3)
PAGE 1 (BACK OF PAGE 4)
I would like to create a free small document about how to be ecological.
This could be used to demonstrate how generate electrictiy using ecological methods such as wind, solar, geothermal or biomass. It would mainly be targeted towards. It could also inform people about how much electricty these methods could produce, how much they cost and how much money they could potentially save a householder.
It could also inform people about how to make better use of the elctricity which comes into your house. The most ecological forms of fixtures, the best forms of insulation and the best time to use certain appliances within the home.
The whole document would be aimed towards saving the householder money as this is a language that everone understands.
Table of Contents:
Font Page: Title Page
Second Page (Back of Front Page): Wind Energy
Third Page: Solar Energy
Fourth Page: Geothermal/Biomass
Fith Page(Back of Third Page): Insulation
Sixth Page(Back of Fourth Page): General Information
Because of the nature of this leaflet and because it is aimed to be given out for free it would make sense to make it would make sense to make it cheaply and ecologically.
The document would consits of one small piece of recycled paper which could be folded into three sections.
The recycled paper counld be bought or it could be made. The size of the document would vary depending if the paper was recycled or bought. You can buy recycled paper from rps.gn.apc.org at a cost of 31.20 pounds for 500 sheets of A4 which could then be cut in half so that each A4 page could produce 2 leaflets of size: 105mm x 297mm.
If you wish you could recycle the paper yourself. This used a wire hanger and so is decided by the size of the hanger which could be 200mm x 450mm. It could also be made to the same size as the paper which you could buy 105mm x 297mm. Recycled paper can be made from old newspaper, following the instructions below. You will need: * a food processor or an old blender * an electric iron * an old wire hanger * an old pair of tights * newspaper or other paper, torn into 2-inch squares * white glue * water * an insect screen or strainer (optional) * food coloring (optional) * a big sink or tub filled with 4 inches of water
Step One: Make a frame out of the coat hanger. You’ll need a frame for each piece of paper you make. Stretch the hanger and bend it into a rectangle/square shape. Take one leg of the tights and stretch it carefully over the hanger frame. Make sure it is tight and flat.
Step Two: Put a handful of the torn up paper and some water into the food processor or blender. Blend the mixture on high until it becomes mushy. Keep adding paper and water until you have a big gray blob. You may have to add a little more water to keep things moving smoothly. Keep the food processor on until all the paper has disappeared. Then leave it on for 2 minutes. For some color, add a handful of brown or red onion skin (not the onion itself, just the papery outer skin).
Step Three: Put 2 tablespoons of white glue in the sink water and add all of the paper pulp you just made. Mix it really well. Use your hands.
Step Four: Scoop the frame to the bottom of the sink, then lift it slowly. (Count to 20 slowly while you are lifting.) Let the water drain out for about a minute.
Step Five: Hang the frames on a clothesline or put them out in the sun. Wait until they are completely dry with no dampness at all. You can then gently peel off the paper.
Step Six: Use the iron, set on the hottest setting, to steam out your paper. You can keep making paper until the pulp is all strained out of the sink. Mix up the sink every time you make a new piece.
PAGE 2
PAGE 3
PAGE 5
PAGE
(BACK OF PAGE 2)
(BACK OF P
3
PAGE 4
6 PAGE 3)
PAGE 1 (BACK OF PAGE 4)
Related Documents
Exercise Three. John Allen
July 2020 10
Exercise Three
June 2020 14
Exercise Three
June 2020 12
Buerger Allen Exercise
December 2019 8
Exercise Three. Edel Murphy
July 2020 11