Emission Test Cycle.docx

Emission test cycle From Wikipedia, the free encyclopedia

Jump to navigationJump to search "Smog check" redirects here. For the program in California, see California Smog Check Program. This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Emission test cycle" – news · newspapers · books · scholar · JSTOR (December 2011) (Learn how and when to remove this template message)

An emission test cycle is a protocol contained in an emission standard to allow repeatable and comparable measurement of exhaust emissions for different engines or vehicles. Test cycles specify the specific conditions under which the engine or vehicle is operated during the emission test. There are many different test cycles issued by various national and international governments and working groups.[1] Specified parameters in a test cycle include a range of operating temperature, speed, and load. Ideally these are specified so as to accurately and realistically represent the range of conditions under which the vehicle or engine will be operated in actual use. Because it is impractical to test an engine or vehicle under every possible combination of speed, load, and temperature, this may not actually be the case. [2] Vehicle and engine manufacturers may exploit the limited number of test conditions in the cycle by programming their engine management systems to control emissions to regulated levels at the specific test points contained in the cycle, but create a great deal more pollution under conditions experienced in real operation but not represented in the test cycle. This results in real emissions higher than the standards are supposed to allow, undermining the standards and public health. [3][4]

Application[edit] Emission test cycles are typical tests for research and development activities on engines at automobile OEMs. The commonly used hardware platforms therefore are: 

engine test stand - for just a single engine



vehicle test stand (also "chassis dynamometer" or "chassis dyno" or "emission dyno") for the complete car with engine



ASM Test - Accelerated Simulation Mode: (California inspections) Vehicles tested at 15 MPH & 25 MPH where vehicle undergoes a load.