Dynamic Power Management For Embedded System
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Dynamic Power Management For Embedded System as PDF for free.
More details
- Words: 886
- Pages: 15
Technical Seminar Presentation 2004
Dynamic power management for embedded system
“Dynamic power management for embedded
system” Under the guidance of Mr. Shyamalendu Mohanty
Presented by- Geetanjali Konhar
EE 200167O81
1
Technical Seminar Presentation 2004
Dynamic power management for embedded system
Introduction This dynamic power management refers to power management schemes implemented while programs are running. This architecture is based on the capabilities of current and next-generation processors and their application requirements.
Presented by- Geetanjali Konhar
EE 200167O81
2
Technical Seminar Presentation 2004
Dynamic power management for embedded system
REQUIREMENTS The overriding power management goal in portable system is to reduce system-wide energy consumption. Dynamic power management is only concerned with voltage and frequency. Dynamic power management architecture supports the ability of processors and external bus frequencies, in concerned with or even independent of the CPU frequency.
Presented by- Geetanjali Konhar
EE 200167O81
3
Technical Seminar Presentation 2004
Dynamic power management for embedded system
ARCHITECTURAL OVER VIEW
A high-level view of dynamic power management Presented by- Geetanjali Konhar
EE 200167O81
4
Technical Seminar Presentation 2004
Dynamic power management for embedded system The low-level implementation of the dynamic power management architecture (DPM) is resident in the kernel of the operating system. DPM is not a self-contained device driver. Complete power management strategy is communicated to DPM in to ways: as an predefined set of policies and as an application/policy-set specific manager that manages them.
Presented by- Geetanjali Konhar
EE 200167O81
5
Technical Seminar Presentation 2004
Dynamic power management for embedded system Policies specify the component and device-state transitions that ensure reliable operation in line with the power management strategy. DPM policy managers are executable programs that activate policies by name. Policy managers implement user defined and/or application-specific power management strategies. They can execute either as part of the kernel or in user space (or both) as required by the strategy. Presented by- Geetanjali Konhar
EE 200167O81
6
Technical Seminar Presentation 2004
Dynamic power management for embedded system
POLICY ARCHITECTURE OPERATING POINTS Operating point may be described different parameters such as core voltage, CPU bus frequencies and states of peripheral devices. Operating points for the IBM PowerPC 405LP specify a core voltage level, CPU and bus frequencies, memory timing parameters and other clocking related data.
Presented by- Geetanjali Konhar
EE 200167O81
7
Technical Seminar Presentation 2004
Dynamic power management for embedded system OPERATING STATES In dynamic power management policy, operating state associated with an operating point specific to the requirements of that state. Operating state was the observation that includes the system-wide energy savings, it can be done by reducing CPU and bus frequency and core voltage while the system is in ideal state.
Presented by- Geetanjali Konhar
EE 200167O81
8
Technical Seminar Presentation 2004
Dynamic power management for embedded system POLICIES AND POLICY MANAGER Policy maps each operating state to a congruence class of operating point. Policy manager collect information from the operating system, user performances, running programs, configuration files and/or physical devices to make it policy decisions.
Presented by- Geetanjali Konhar
EE 200167O81
9
Technical Seminar Presentation 2004
Dynamic power management for embedded system
DEVICE CONSTRAINT MANAGER Automatic selection of operating points as devices change states is a central feature of DPM. Embedded systems may not have a BIOS or machine abstraction layer to insulate the operating system from low-level device and power management. The most aggressive power management strategies will also require the system designer to carefully consider the influence of attached devices on the strategy.
Presented by- Geetanjali Konhar
EE 200167O81
10
Technical Seminar Presentation 2004
Dynamic power management for embedded system
ABSTRACT IMPLIMENTATION This Section gives our preferred implementation and the rationale behind the choices made in the implementation. Two of the challenges with respect to implementing this system include: Changes in device constraints may invalidate operating points. Automating these transitions is the primary mechanism by which the architecture
Presented by- Geetanjali Konhar
EE 200167O81
11
Technical Seminar Presentation 2004
Dynamic power management for embedded system relieves the high-level power management task from having to deal with device states. This leads to several conflicts. Operations on the DPM implementation may block. Blocking could arise at the very lowest level of the implementation, where power management device drivers use system I/O ports to control voltages and frequencies.
Presented by- Geetanjali Konhar
EE 200167O81
12
Technical Seminar Presentation 2004
Dynamic power management for embedded system Implementation and Effects Of task_specific Operating States
task-specific operating points,implemented by assigning different task operating states to different tasks. The task state of a task is changed by the set_task_state () entry point, which may be exported to the user level as a system call. Thus a system can be constructed where a single intelligent policy manager controlled the task states of critical programs for improved power/performance efficiency. Presented by- Geetanjali Konhar
EE 200167O81
13
Technical Seminar Presentation 2004
Dynamic power management for embedded system
CONCLUSION This paper has proposed an architecture supporting aggressive dynamic power management for embedded systems. The power management schemes implemented while programs are running. Dynamic power management strategies based on dynamic voltage and frequency scaling.
Presented by- Geetanjali Konhar
EE 200167O81
14
Technical Seminar Presentation 2004
Dynamic power management for embedded system
THANK YOU
Presented by- Geetanjali Konhar
EE 200167O81
15
Dynamic power management for embedded system
“Dynamic power management for embedded
system” Under the guidance of Mr. Shyamalendu Mohanty
Presented by- Geetanjali Konhar
EE 200167O81
1
Technical Seminar Presentation 2004
Dynamic power management for embedded system
Introduction This dynamic power management refers to power management schemes implemented while programs are running. This architecture is based on the capabilities of current and next-generation processors and their application requirements.
Presented by- Geetanjali Konhar
EE 200167O81
2
Technical Seminar Presentation 2004
Dynamic power management for embedded system
REQUIREMENTS The overriding power management goal in portable system is to reduce system-wide energy consumption. Dynamic power management is only concerned with voltage and frequency. Dynamic power management architecture supports the ability of processors and external bus frequencies, in concerned with or even independent of the CPU frequency.
Presented by- Geetanjali Konhar
EE 200167O81
3
Technical Seminar Presentation 2004
Dynamic power management for embedded system
ARCHITECTURAL OVER VIEW
A high-level view of dynamic power management Presented by- Geetanjali Konhar
EE 200167O81
4
Technical Seminar Presentation 2004
Dynamic power management for embedded system The low-level implementation of the dynamic power management architecture (DPM) is resident in the kernel of the operating system. DPM is not a self-contained device driver. Complete power management strategy is communicated to DPM in to ways: as an predefined set of policies and as an application/policy-set specific manager that manages them.
Presented by- Geetanjali Konhar
EE 200167O81
5
Technical Seminar Presentation 2004
Dynamic power management for embedded system Policies specify the component and device-state transitions that ensure reliable operation in line with the power management strategy. DPM policy managers are executable programs that activate policies by name. Policy managers implement user defined and/or application-specific power management strategies. They can execute either as part of the kernel or in user space (or both) as required by the strategy. Presented by- Geetanjali Konhar
EE 200167O81
6
Technical Seminar Presentation 2004
Dynamic power management for embedded system
POLICY ARCHITECTURE OPERATING POINTS Operating point may be described different parameters such as core voltage, CPU bus frequencies and states of peripheral devices. Operating points for the IBM PowerPC 405LP specify a core voltage level, CPU and bus frequencies, memory timing parameters and other clocking related data.
Presented by- Geetanjali Konhar
EE 200167O81
7
Technical Seminar Presentation 2004
Dynamic power management for embedded system OPERATING STATES In dynamic power management policy, operating state associated with an operating point specific to the requirements of that state. Operating state was the observation that includes the system-wide energy savings, it can be done by reducing CPU and bus frequency and core voltage while the system is in ideal state.
Presented by- Geetanjali Konhar
EE 200167O81
8
Technical Seminar Presentation 2004
Dynamic power management for embedded system POLICIES AND POLICY MANAGER Policy maps each operating state to a congruence class of operating point. Policy manager collect information from the operating system, user performances, running programs, configuration files and/or physical devices to make it policy decisions.
Presented by- Geetanjali Konhar
EE 200167O81
9
Technical Seminar Presentation 2004
Dynamic power management for embedded system
DEVICE CONSTRAINT MANAGER Automatic selection of operating points as devices change states is a central feature of DPM. Embedded systems may not have a BIOS or machine abstraction layer to insulate the operating system from low-level device and power management. The most aggressive power management strategies will also require the system designer to carefully consider the influence of attached devices on the strategy.
Presented by- Geetanjali Konhar
EE 200167O81
10
Technical Seminar Presentation 2004
Dynamic power management for embedded system
ABSTRACT IMPLIMENTATION This Section gives our preferred implementation and the rationale behind the choices made in the implementation. Two of the challenges with respect to implementing this system include: Changes in device constraints may invalidate operating points. Automating these transitions is the primary mechanism by which the architecture
Presented by- Geetanjali Konhar
EE 200167O81
11
Technical Seminar Presentation 2004
Dynamic power management for embedded system relieves the high-level power management task from having to deal with device states. This leads to several conflicts. Operations on the DPM implementation may block. Blocking could arise at the very lowest level of the implementation, where power management device drivers use system I/O ports to control voltages and frequencies.
Presented by- Geetanjali Konhar
EE 200167O81
12
Technical Seminar Presentation 2004
Dynamic power management for embedded system Implementation and Effects Of task_specific Operating States
task-specific operating points,implemented by assigning different task operating states to different tasks. The task state of a task is changed by the set_task_state () entry point, which may be exported to the user level as a system call. Thus a system can be constructed where a single intelligent policy manager controlled the task states of critical programs for improved power/performance efficiency. Presented by- Geetanjali Konhar
EE 200167O81
13
Technical Seminar Presentation 2004
Dynamic power management for embedded system
CONCLUSION This paper has proposed an architecture supporting aggressive dynamic power management for embedded systems. The power management schemes implemented while programs are running. Dynamic power management strategies based on dynamic voltage and frequency scaling.
Presented by- Geetanjali Konhar
EE 200167O81
14
Technical Seminar Presentation 2004
Dynamic power management for embedded system
THANK YOU
Presented by- Geetanjali Konhar
EE 200167O81
15
Related Documents
Dynamic Power Management For Embedded System
June 2020 22
Embedded System For Computers.
July 2020 36
Optimization For Embedded System
October 2019 48
Embedded System
May 2020 41
Dynamic Power
October 2019 28
Embedded System
May 2020 36More Documents from "d_dhara"
Technical Seminar Presentation 2004
June 2020 4
En Neurocomp
June 2020 7
Artificial Neural Network For Misuse Detection
June 2020 8