SPECIFICATION Product Acrylic Coated Wallpaper Environmental Information Environmental aspects on Duro’s wallpapers Since the 1950:ies Duro has been consistent in choosing raw materials that are harmless for the environment and health in our production, e.g. only water based coatings, that are harmless for the environment, are used in the production. This also results in that no harmful waste is produced in the process of making the wallpaper and it also gives us a healthy environment in our production plant. Allergy/Asthma The wallpaper is produced without material that will provoke allergic reaction. All wallpapers produced by Duro are free from heavy metals, PVC, solvents and other environmental harmful substances. Solvent-free The wallpaper contains no solvents, since all Duro’s products are produced with water based printing ink. Recycling and Waste The wallpaper can be paper or energy recycled. No wallpaper of Duro is considered as hazardous waste. Packaging All the packaging is recyclable. Duro is connected to the Swedish REPAregister. Formaldehyde Formaldehyde occurs naturally in pulp, therefore formaldehyde can be detected from wallpaper. The formaldehyde emission from the paper base is well below the limits set by the standard RAL-GZ 479: 2002.
1
Product Information Product:
Acrylic coated wallpaper
Material:
Paper from mixture of cellulose fibres for wallpapers.
Dimensions:
Roll length: 10,05-11,20 m. Width: 0,53 m.
Use:
Wall decoration indoors.
Extra-washable wallpaper:
Wallpaper from which dirt and most domestic water based stains may be cleaned from the front face with a wet cloth and soapy water. Oils, fats and solvent based stains are not expected to be removable, but some greasy stains may be removed if action is taken immediately after contamination. The wallpaper is Extra-washable according to standard EN 233.
Very good colour fastness:
Colour fastness to light is rated 6-8 in a scale from 1 to 8 (where 8 is the highest rating) according to the standard ISO 105 - B02.
Fire classification:
Wallpaper hanged on not combustible foundation will not affect the course of the fire. The fire classification is class I on not combustible foundation, class II on plaster board according to standard SS 02 48 23 (NT FIRE 004).
Opacity:
We have chosen a special paper base, which together with our ink covers the background totally.
Adhesive recommendation:
Modified starch or cellulose based adhesive. The adhesive is applied to the back of the wallpaper. After 5 minutes soaking the wallpaper is ready to be attached to the wall.
2
SPECIFICATION Product QuickUp Wallpaper Environmental Information Environmental aspects on Duro’s wallpapers Since the 1950:ies Duro has been consistent in choosing raw materials that are harmless for the environment and health in our production, e.g. only water based coatings, that are harmless for the environment, are used in the production. This also results in that no harmful waste is produced in the process of making the wallpaper and it also gives us a healthy environment in our production plant. Allergy/Asthma The wallpaper is produced without material that will provoke allergic reaction. All wallpapers produced by Duro are free from heavy metals, PVC, solvents and other environmental harmful substances. Solvent-free The wallpaper contains no solvents, since all Duro’s products are produced with water based printing ink. Recycling and Waste The QuickUp quality wallpaper can be energy recycled. No wallpaper of Duro is considered as hazardous waste. Packaging All the packaging is recyclable. Duro is connected to the Swedish REPAregister. Formaldehyde Formaldehyde occurs naturally in pulp, therefore formaldehyde can be detected from wallpaper. The formaldehyde emission from the non woven base is well below the limits set by the standard RAL-GZ 479: 2002.
3
Product Information Product:
QuickUp Wallpaper
Material:
Base material is a non-woven from cellulose and polyester fibres.
Dimensions:
Roll length: 10,05 m, Width: 0,53 m.
Use:
Wall decoration indoors.
Extra-washable Wallpaper:
Wallpaper from which dirt and most domestic water based stains may be cleaned from the front face with a wet cloth and soapy water. Oils, fats and solvent based stains are not expected to be removable, but some greasy stains may be removed if action is taken immediately after contamination. The wallpaper is Extra-washable according to standard EN 233.
Very good colour fastness:
Colour fastness to light is rated 6-8 in a scale from 1 to 8 (where 8 is the highest rating) according to the standard ISO 105 - B02.
Fire classification:
Wallpaper hanged on not combustible foundation will not affect the course of the fire. The fire classification is B-s1, d0 according to standard EN 13501-1:2002. This is the best classification for a surface layer such as wallpaper.
Dimensional stability: Duro’s non-woven has very good dimensional stability, max 0,2% cross direction. This ensures very good pastethe-wall properties. Opacity:
Our QuickUp wallpapers have the same ability to cover the background as paper-based wallpapers.
Adhesive recommendation:
PVAc reinforced adhesive. The adhesive is applied to the wall. The wallpaper is then attached to the pasted wall.
4
Hanging instructions – QuickUp wallpapers Paste the wall!
1. Before you hang the wallpaper, make sure the surface is even. Tear off any loose pieces. Fill uneven parts and wallpaper joints with filler.
yyyyyyyyy ;;;;;;;;; yyyyyyyyy ;;;;;;;;; yyyyyyyyy ;;;;;;;;; yyyyyyyyy ;;;;;;;;; yyyyyyyyy ;;;;;;;;; yyyyyyyyy ;;;;;;;;; yyyyyyyyy ;;;;;;;;; yyyyyyyyy ;;;;;;;;; 5. Fix the length high enough up the wall so that a piece of the length is above the line on which you intend to trim.
;;;;;;;;;; yyyyyyyyyy ;;;;;;;;;; yyyyyyyyyy ;;;;;;;;;; yyyyyyyyyy ;;;;;;;;;; yyyyyyyyyy ;;;;;;;;;; yyyyyyyyyy ;;;;;;;;;; yyyyyyyyyy ;;;;;;;;;; yyyyyyyyyy ;;;;;;;;;; yyyyyyyyyy 9. Trim the section near the ceiling. Use the large spatula as a support.
Do you have everything you need? - Paste - Roller and/or brush - Razor knife - Plumb line - Folding rule - Ruler or spatula - Metal ruler with dubble cutter - QuickUp box - Plastic smoother - (Wallpaper board)
yyyyyyyyyy ;;;;;;;;;; ;;;;;;;;;; yyyyyyyyyy ;;;;;;;;;; yyyyyyyyyy ;;;;;;;;;;; yyyyyyyyyyy ;;;;;;;;;; yyyyyyyyyy yyyyyyyyyyy ;;;;;;;;;; yyyyyyyyyy ;;;;;;;;;;; yyyyyyyyyyy ;;;;;;;;;;; 2. Unroll two rolls side by side to see how the pattern matches. Ensure that they are without any visible defects.
yyyy ;;;; ;;;; yyyy ;;;; yyyy ;;;; yyyy ;;;; yyyy ;;;; yyyy ;;;; yyyy ;;;; yyyy ;;;; yyyy
6. Use a length of string attached to something heavy such as a pair of scissors to check that the length really is hanging straight.
yyy ;;; yyy ;;;yyy ;;; yyy ;;; yyy ;;;yyy ;;; yyy ;;; yyy ;;;yyy ;;; yyy ;;; yyy ;;;yyy ;;; yyy yyy ;;; ;;;yyy ;;; yyy ;;; yyy ;;;yyy ;;; yyy ;;; yyy ;;;yyy ;;; yyy ;;; yyy ;;;yyy ;;; yyy ;;;yyy ;;;
10. Butt join lengths (do not overlap). Remove bubbles in the same way as before, and be particularly careful at the joints.
yyy ;;; ;;; yyy ;;; yyy ;;; yyy ;;; yyy ;;; yyy ;;; yyy 3. Apply glue to the wall corresponding to the width of 2-3 lengths, or about 1-1.5m. Use a roller, or a brush where it is difficult to get at with a brush.
yyyyyy ;;;;;; ;;;;;; yyyyyy ;;;;;; yyyyyy ;;;;;; yyyyyy ;;;;;; yyyyyy ;;;;;; yyyyyy ;;;;;; yyyyyy ;;;;;; yyyyyy ;;;;;; yyyyyy
7. Even out the wallpaper and remove the bubbles with the papering tool. Be careful at the edge of the length in order not to get any glue on the tool.
yyyyyy yyyyy ;;;;;; ;;;;; yyyyyy yyyyy ;;;;;; ;;;;; yyyyyy yyyyy ;;;;;; ;;;;; yyyyyy yyyyy ;;;;;; ;;;;; yyyyyy yyyyy ;;;;;; ;;;;; yyyyyy yyyyy ;;;;;; ;;;;; yyyyyy yyyyy ;;;;;; ;;;;; yyyyyy yyyyy ;;;;;; ;;;;; yyyyyy yyyyy ;;;;;; ;;;;; 11. In a corner you have to cut the length. Apply glue to the wall, about the width of the wallpaper strip. Let the first part of the length pass into the corner with an overhang of about 2cm. Inside corners: Hang the next length with an overlap all the way into the corner. Apply some glue onto that section of the wallpaper that ends up under the overlap. Wipe off any excess glue with some water and a sponge.
4. Put the roll into the QuickUp box and pull up the first length.
yyyyyy ;;;;;; yyyyy ;;;;; yyyyyy ;;;;;; yyyyy ;;;;; yyyyyy ;;;;;; yyyyy ;;;;; yyyyyy ;;;;;; yyyyy ;;;;; yyyyyy ;;;;;; yyyyy ;;;;; yyyyyy ;;;;;; yyyyy ;;;;; yyyyyy ;;;;;; yyyyy ;;;;; yyyyyy ;;;;;; yyyyy ;;;;; yyyyy ;;;;; 8. Trim the section near the floor. Use the large spatula as a guide. Change the blade often, a dull blade will tear the wallpaper.
12. Outside corners: Hang the next length with an overhang of about 5mm onto the next wall to avoid tearing it if you should brush against the corner when passing. Check that the length is hanging straight. Wipe off any excess glue with some water and a sponge.
Duros QuickUp wallpaper are manufactured in a dimensionally stable and environmental friendly material. You can of course paste the back of the wallpaper as you do traditionally and then hang the lengths on the wall. The wallpapers nor swell neither schrink. When you hang a border you paste the back of the border. Good ventilation is important after hanging your wallpapers.
Duro Sweden AB, Box 907, 801 32 Gävle www.durosweden.se
[email protected]
Hanging instructions – Acrylic coated wallpaper
1. Before you hang the wallpaper, make sure the surface is even. Tear off any loose pieces. Fill uneven parts and wallpaper joints with filler.
;;;;;; @@@@@@ ;;;;;; @@@@@@ ;;;;; @@@@@ ;;;;;; @@@@@@ ;;;;; @@@@@ ;;;;;; @@@@@@ ;;;;; @@@@@
;;;;;;;;; @@@@@@@@@ @@@@@@@@@ ;;;;;;;;; @@@@@@@@@ ;;;;;;;;; @@@@@@@@@ ;;;;;;;;; @@@@@@@@@ ;;;;;;;;; 2. Unroll two rolls side by side to see how the pattern matches. Ensure that they are without any visible defects.
Prepasted
Non-pasted
5. When you have pulled it out to about half of its length, fold it over, patterned side outwards. Pull out the rest and fold it in the same manner. Let it soak for about five minutes before you hang it up.
(4.) Apply paste with a brush or a roller. Make sure that the paste is spread all over the surface.
@@@@@@@@ ;;;;;;;; @@@@@@@@ ;;;;;;;; @@@@@@@@ ;;;;;;;; ;;;;;; @@@@@@@@ ;;;;;;;; @@@@@@ ;;;;;; @@@@@@ @@@@@@@@ ;;;;;;;; ;;;;;; @@@@@@ @@@@@@@@ ;;;;;;;; ;;; @@@ ;;;;;;;; @@@@@@@@ ;;; @@@ ;; @@ ;;;;;;;; @@@@@@@@ ;;; @@@ ;; @@ ;;;;;;;; @@@@@@@@ ;;; @@@ ;; @@ ;;;;;;;; @@@@@@@@ ;;; @@@ ;;;;;;;; @@@@@@@@ ;;; @@@ Prepasted
3. Cut the length with a few centimeters to spare. The outer part of the roll must be towards the floor.
4. Fill the trough with water. Add a few drops of detergent to the water. Always keep it filled. Press the rolled-up length into the water. Take hold of the short end of the length and pull. Make sure that water covers the entire rear surface of the wallpaper.
Non-pasted
(5.) Fold both ends carefully to meet in the middle with pasteside inwards. Make sure that the edges are aligned. Leave it to soak for a few minutes (see the label).
6. Start wallpapering by a window. Cover approximately half the room up to a door or a corner on the opposite wall. Then start again by the window, and cover rest of the room. When you get to a lightswitch or a power socket, turn off the electricity at the mains and remove the protective cover.
;;;;;;;;; @@@@@@@@@ ;;;;;;;;; @@@@@@@@@ ;;; @@@ ;;;;; @@@@@ ;; ;;;;;;;; @@ @@@@@@@@ ;;;;;;;;; @@@@@@@@@ ;;;;;;;;; @@@@@@@@@ ;;; @@@ ;;;;; @@@@@ ;; ;;;;;;;; @@ @@@@@@@@ ;;;;;;;;; @@@@@@@@@ ;;; @@@ ;;;;;;;;; @@@@@@@@@ ;;;;; @@@@@ ;; ;;;;;;;; @@ @@@@@@@@ ;;;;;;;;; @@@@@@@@@ ;;; @@@ ;;;;;;;;; @@@@@@@@@ ;;;;; @@@@@ ;; ;;;;;;;; @@ @@@@@@@@ ;;;;;;;;; @@@@@@@@@ ;;;;;;;;; @@@@@@@@@ ;;; @@@ ;;;;; @@@@@ ;; ;;;;;;;; @@ @@@@@@@@ ;;;;;;;;; @@@@@@@@@ ;;; @@@ ;;;;; @@@@@ ;;;; @@@@ ;;;;;; @@@@@@ @@@@@@@@@ ;;;;;;;;; ;;;;;;;;; @@@@@@@@@ ;;;; @@@@ ;;;;;; @@@@@@ ;;;; @@@@ ;;;;;; @@@@@@ ;;;;;;;;; @@@@@@@@@ ;;;;;;;;; @@@@@@@@@ ;;;; @@@@ ;;;;;; @@@@@@ ;;;; @@@@ ;;;;;; @@@@@@ ;;;;;;;;; @@@@@@@@@ ;;;;;;;;; @@@@@@@@@ ;;;;;; @@@@@@ ;;;; @@@@ ;;;;;; @@@@@@ ;;;; @@@@ ;;;;;;;;; @@@@@@@@@ ;;;;;;;;; @@@@@@@@@ ;;;; @@@@ ;;;;;; @@@@@@ ;;;; @@@@ ;;;;;; @@@@@@ ;;;;;;;;; @@@@@@@@@ ;;;;;;;;; @@@@@@@@@ ;;;; @@@@ ;;;;;; @@@@@@ ;;;; @@@@ ;;;;;; @@@@@@ 7. Attach the length high enough up the wall so that a piece of the length is above the line where you intend to trim.
8. Use a length of string attached to something heavy such as a pair of scissors to check that the length really is hanging straight.
9. Unfold the lower half. Brush out any bubbles with a sponge or a brush. Work from the middle towards the edges, and from the ceiling towards the floor.
10. Trim the section near the ceiling. Use the large spatula as a support.
11. Trim the section near the floor. Use the large spatula as a guide. Change the blade often, a dull blade will tear the wallpaper.
12. Butt joint lengths (do not overlap).
13. When you get to a corner, wet or glue, and fold the length as usual. Make sure the sides are truly aligned. Divide the length lengthwise so that the first section goes around the corner with about a two centimeter overhang. Use a cutting block and a cutting ruler.
14. Make sure the first length goes all the way into the corner. Hang the second part with a bit of overlap. Use your string and scissors to ensure that the length hangs true, even if the patterns do not match up perfectly.
Do you have everything you need? - Paste - Roller and/or brush - Razor knife - Plumb line - Folding rule
- Ruler or spatula - Metal ruler with dubble cutter - Sponge/brush - Wallpaper board
Duro Sweden AB, Box 907, 801 32 Gävle www.durosweden.se
[email protected]
Covers uneven surfaces (I.e. painted glass fiber fabric). It brings a smooth surface for paperhanging and painting. The material is so flexibel that you can use it even as roof improvement.
hanging INSTRUCTIONS
1. Check that the goods are without visible errors.
2. The walls must be dry and clean. Unfixed foundation should be corrected. Strong absorbing surfaces may need grounding.
3. Cut the length in appropriate size. Apply glue on the wall (use ready mix for heavy wallpaper for securing equalizing) and put up the Easy Cover. You can test on a smaller surface to see the effects on your foundation.
4. Easy Cover is putted up edge to edge. You may also put it up with overlap and then cut through both layers. You will then get a perfect joint.
5. At the corners the lengths should be completed.
6. Smooth out Easy Cover with a wallpapertool. Note. Avoid pushing to hard into the structure.
TIP!
Checklist?
Outer corner: When overlapping, then the regular wallpaper should overlap according practice. When over-painting, then the corner should be glass fibre strengthened and puttied.
- Glue - Roller and/or paintbrush - Wallpaperknife with razor blade - Plummet - Folding rule - Ruler or putty - Cutting ruler with cutting closs - Wallpaper tool/Smoother - (Wallpaper table)
7. Let dry approximately 24 hours. Put wallpaper or indoorpaint above the Easy Cover according recommendations from the producer.
Inner corner: When overlapping, then the overlap with the regular wallpaper is put up on normal way.
Duro Sweden AB, Box 907, 801 32 Gävle www.durosweden.se
[email protected]
Facts about wallpapers Acrylic coated wallpaper Nyans (paper-backed)
QuickUp QuickUpwallcovering tapr
Easy Easy Cover Cover
High quality wallpaper with acrylate coating
Paste the wall - Quick and easy
Covers uneven surfaces on walls and ceilings. Perfect surface for wallcovering and painting.
Description:
Acrylic coated wallpaper (paperbase).
Description:
Description:
Measures:
Length 10,05 m. Width 53 cm.
Measures:
Length 10,05 m. Width 53 cm.
Measures:
Length 10 m. Width 1 m.
Washability:
The wallpaper can take strong washing with sponge, lukewarm water and soft soap.
Washability:
The wallpaper can take strong washing with sponge, lukewarm water and soft soap.
Puttying/ grinding:
Easy Cover can be puttied when needed, for example corners. Use smooth sandpaper for grinding.
Hanging instruction:
Butt joint or with thread edge.
Hanging instruction::
Butt joint
Hanging instruction:
Butt joint
Dimensionally stable wallcovering
Paste recommendations:
Paste recommendations:
Paste/glue recommendations:
Fiberglas wall adhesive with <20% solid content Non-woven glue Fiberglas adhesive too pasting machine
Wallpaper paste based on starch Wallpaper paste based on cellulose and PVAc Ready mix adhesive, starch based with PVAc
Hanging instruction: Apply paste on the back of the wallpaper. Fold both ends to meet in the middle and leave it to soak for around 5 minutes. Start wallpapering by a window. Detailed hanging instructions on the label of the wallpaper roll.
Hanging instruction: Apply paste on the wall and then hang the lengths. You can also apply paste on the back of the wallpaper. Detailed hanging instructions on the label of the wallpaper roll.
Consumption for a room with 1 door and 1 window, height of room 2.5 m:
Consumption for a room with 1 door and 1 window, height of room 2.5 m:
Floor 3x4m 4x5m 5x6m
Patterned 9 11 14
Plain 7 9 11
Floor 3x4m 4x5m 5x6m
Patterned 9 11 14
Glasfiberarmed base with environmental friendly latex coating
Plain 7 9 11
Wet room adhesive Fiberglas wall adhesive with >20% solid content Use wet room adhesive for securing equalizing effect.
Hanging instruction: Apply paste on the wall and then hang Easy Cover. Leave it to soak for about 24 hours before you paint or hang your wallpapers according to manufacturers advice. Detailed hanging instructions on the label of the wallpaper roll. Consumption for a room with 1 door and 1 window, height of room 2.5 m: Floor 3x4 4x5 5x6
Rolls 4 5 6
Symbols Symboler Spongeable wallpaper Washable wallpaper Super washable wallpaper Less lightfastness Good lightfastness Very good lightfastness Straight match
No match
Paste the wall
Peelable