Ducting Alignment.docx

Scope and Delimitations

This project is designed for special purpose that it has capabilities and limitations to its function as it is to do it certain task. The design is focusing to the modification of air cooled condenser unit in particular with the hot air exhaust. Fabrication of the prototype fully show the capabilities of the newly modify components of the whole study. The design parameters will be the basis for the proper installation of duct in the hot air exhaust of the condenser unit. The results of testing will be based on trial according to the prototype output. The main scope of the study aims the modification of hot air exhaust especially in the face-to-face wall or narrow spaces. This will also provide safer environment through avoiding the overload or overheat of the condenser unit. The use of prototype in order to see the actual operation according to its functions will be also considered in this study. The prototype varies depend on the system in which certain requirement of the whole study will fully shows according to its function.

Conceptual Framework The conceptual framework of this study follows the pattern of the systems approach. It conveys the areas and fields of concern, in which this study aims to analyze the information needed for the researcher of the modified hot air exhaust in a condenser unit. The Input Process Output is used for the Conceptual Framework that will serve as a guide in finishing the project study. It shows the structure on how to conduct the study and execute the proposed design. The conceptual design of the study consists of standards, procedures and the project. The conceptual framework of this research is based on the following data inputs:

ducting