Cv E Mosafer

CURRICULUM VITAE NAME: Mehdi Mosafer Birth: 1973 ADDRESS: Unit 6, No. 18 (Parvaz Residential Complex), Baharan Alley, Amir Ebrahim St., 22 Bahman Ave., Baq-E-Feyz, 1473789618 Tehran, IRAN Phone : +98 21 44413725 Mobile: +98 912 3721594 E-Mail: [email protected] [email protected] EDUCATION: M. Sc.: Mech. Eng., Guilan University, Rasht, Iran September 2000, First Rank with average 89.35 /100 Thesis: Optimization Methods and their Application for PID Controllers Tuning B. Sc.: Mech. Eng., Guilan University, Rasht, Iran September 1998, with average 74.85 /100 Final Project: Optimal Control of a Semi-Definite Vibrating System LANGUAGES: English Persian Azari

Fluent Fluent (Mother Tongue) Fluent

RESEARCH FIELDS: Sea Waves, Optimization Methods, Numerical Methods, Nonlinear Equations, Composite Shells, Dynamics of Composite Structures, Composite Chassis, Coupled Elasticity, Thermal Stress, Finite Element Methods, Boundary Element Methods, Computing Fluid Dynamics, Design of Controllers, System Identification, Robotics, Vehicle Dynamics, Fuzzy Logic, Fuzzy Controllers, Artificial Neural Networks, NeuroFuzzy, GMDH, FOREX, … EMPLOYMENT:

1

-

Pipeline Engineer, Naval Engg. Dept., IOEC, Tehran, Iran, 2007-Now. o Document Preparation for South Pars Gas Field Development Project (Phase 1, Temporary 18” Pipeline) as under:  18” Pipe Laying Procedure  Field Joint Coating & Coating Repair Procedure  Rough Weather Emergency Procedure  Pigging and Hydrotest Scope of Work o Pipeline Calculation Procedure (for Pipeline Replacement Project-2) o Document Preparation for South Pars Gas Field Development Project (Phase 1, 18” Pipeline System Replacement) as under:  Offloading, Onshore Transportation and Stacking of Supplied Linepipe  18” Pipe Laying Procedure  Rough Weather Emergency Procedure  18” Pipeline Installation Analysis  Pipeline Abandonment and Recovery Procedure (ongoing)  Anchor Handling Tug Procedure (ongoing)  Start-Up Head / Lay-Down Head /Abandonment and Recovery Head Design Report (ongoing) o Document Preparation for South Pars Gas Field Development Project (Phases 15 & 16) as under:  Pipe Joint Sea Fastening Design  Onshore Dead Man Anchor Design o Document Preparation for South Pars Gas Field Development Project (Phases 17 & 18, Infield 20” & 18” with 4” Piggy Back) as under:  Infield Pipe Laying Procedure  Piggy Back Supports and Strapping Procedure  Pipeline Abandonment & Recovery Procedure  Infield Buckle Detection Procedure o Document Preparation for South Pars Gas Field Development Project (Phases 9 & 10, 32” Export Pipelines with 4” Piggy Back) as under:  C-Master Abandonment & Recovery Analysis

-

Offshore Pipeline Engineer, IOEC, Mumbai, India, 2005-2007. o Pipeline activities of RSPPM Project for ONGC o Pipeline Pre-lay survey and As-laid survey supervision for extracting geophysical data (bathymetry, side scan sonar and sub bottom profiling) onboard of Flamboyan and Sagar Purvi o Pipe laying Field Engineer onboard of C-Master (ex Jascon-5) o Free Span Rectification and Crossing Construction Supervision onboard of SEAMEC-1 and SEAMEC-3 o Pigging and Hydrostatic Testing Supervision onboard of Offshore Supplier, Stefani, and Energy o Riser Installation Supervision onboard of C-Master o Free Span & Crossing As-built preparation o Preparation and evaluation of tender documents (for Heera Redevelopment Project) o Procedure Preparation for Pipe Laying and Riser Installation (for Heera Redevelopment Project)

-

Offshore Installation Engineer, IOEC, New Delhi, India, 2003-2005. 2

Pipeline activities of RSPPM Project for ONGC o Minor Activities on 2004  Visit of Jacket Installation of SPP1 Platform (South Pars Gas Field Development Project, Phase 1 Offshore Platforms Jackets), Persian Gulf, Iran  Supervision of Abouzar 1200 Inclining Test, Dubai Dry Dock, UAE  Visit of C-Master (ex Jascon-5) DP3 Pipe Laying Vessel, Sembawang Shipyard, Singapore o

-

Project Engineer, IOEC, Tehran, Iran, 2003. o Preparing of technical part of ONGC 9 Well Platforms Project o Review of engineering documents of method statement for fabrication and installation of platforms

-

Advisor, New Technologies Research Center, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran, 2001-2003. o Modeling and Computer Simulation of Abouzar 1200 Heavy Lift Vessel during Topside Installation for IOEC

-

Expert Mechanics and Production Assistant, ParsPad Co., Tehran, Iran, 20012002. o Reverse Engineering, Design, Amendment, and Manufacturing X-Ray Protective Diaphragm o Preparation of Tests for Standard Assay of Radiology Equipments

-

Advisor, Research Center of Mech. Eng. Dept., Guilan University, Rasht, Iran, 1999-2001. o Mass Optimizing of Bus Composite Chassis for Iran Khodro Diesel

-

Teacher, Civil Eng. Dept., Jame-E-Elmi-Karbordi University of Guilan, Rasht, Iran, 2000.

-

Teacher, Mech. Eng. Dept., Guilan University, Rasht, Iran, 1997-2000.

TRAINING: English Conversation Training Course, 400 hours, Iranian Offshore Engineering and Construction Company (IOEC) - HSE courses for Helicopter Underwater Escape Training (HUET), Personal Safety & Social Responsibility (PSSR), Personal Survival Techniques (PST) and Elementary First Aids (EFA), 10 days, Mumbai, India COURSES TAUGHT: -

-

Calculus Engineering Mathematics Advanced Engineering Mathematics Statics Strength of Materials Mechanical Vibrations 3

-

-

Numerical Methods Programming using MATLAB FOREX with MATLAB

PROFESSIONAL ACTIVITIES: -

Dynamic Simulation Software of Abouzar 1200 Crane Vessel (SIMAB 1200) Auto-Selection of Pipe Laying Parameters using OFFPIPE Data Exchanging with MATLAB (the proposal has not accepted yet) Neuro-Fuzzy Prediction of FOREX (not checked in real account, confidential) Simple Nonlinear Thinking for Market Prediction (founder, not published yet)

COMPUTER SKILLS: MATLAB (Professional, Technical Computing Features and Visualization) OFFPIPE (Offshore Pipeline Installation and Structural Analysis) Maple CATT SIMAB 1200 AutoCAD MS Office Adobe Acrobat Turbo Pascal Familiar with: ANSYS Basic FORTRAN CAESAR II (ongoing) SAP (planned to catch up on it soon) SeaMoor (planned to catch up on it soon) OrcaFlex (planned to catch up on it soon) OrcaLay (planned to catch up on it soon)

4

STANDARD: Familiar with: API 5L (Specification for Line Pipe) API RP 5LW (Recommended Practice for Transportation of Line Pipe on Barges and Marine Vessels) API 1104 (Welding of Pipelines and Related Facilities) API RP 17B (Recommended Practice for Flexible Pipe) API 17J (Specification for Unbonded Flexible Pipe) DNV Rules for Submarine Pipeline Systems 1981 DNV Guidelines 14 (Free Spanning Pipelines) DNV-OS-F101 (Submarine Pipeline Systems) Noble Denton 0030/NDI (General Guidelines for Marine Transportations) Noble Denton 0017/NDI (Guideline for the Calculation of Required Bollard Pull for Towages) Noble Denton 0014/NDI (Guideline for Transportation and Installation of Offshore Platforms) PUBLICATION: 1.

Mosafer, M. and Sabbaghi, M., “Stacking Sequences Optimization of Multi-Layer Composites under General Static Load”, Proceedings of 8th Conference of Iranian Association of Naval Architecture and Marine Engineering, Bushehr, Iran, 2006.

2.

Mosafer, M., Numerical Recipes for Solving Engineering Problems using MATLAB, 2nd print, Motafakkeran Publication Institute, Tehran, Iran, 2005.

3.

Yousefi, A., Abdi, M. and Mosafer, M., “Strategy for Offshore Technology Transfer”, Payam-E-Darya Journal, No. 130, pp 108-113, 2004.

4.

Mosafer, M., Sabbaghi, M. and Bahrami, M., “Calculation of Persian Gulf Wave Forces and Moments on Abouzar 1200”, Proceedings of 5th Conference of Iranian Association of Naval Architecture and Marine Engineering, Kish, Iran, 2003.

5.

Mosafer, M., Tests for Standard Assay of Radiology Equipments, Parspad Co., Tehran, Iran, 2002.

6.

Mosafer, M., Shenasa, M.H. and Nariman-Zadeh, N., “Parameters Optimization of Time Varying PID Controllers”, ISME 2001, Proceedings of 5th International and 9th Annual National Conferences of Iranian Society of Mechanical Engineering, Guilan University, Rasht, Iran, 2001.

7.

Mosafer, M., Fardadi, M. and Kiani, B., “Exact Response of Anisothotropic Media to Thermal Shocks”, ISME 2001, Proceedings of 5th International and 9th Annual National Conferences of Iranian Society of Mechanical Engineering, Guilan University, Rasht, Iran, 2001.

8.

Mosafer, M., Bazeghi, N. and Shiari, B., “Thermal Shocks Response of Layered Orthotropic Media”, ISME 2001, Proceedings of 2nd Student Conferences of Iranian Society of Mechanical Engineering, Orumieh University, Orumieh, Iran, 2001.

9.

Mosafer, M. and Poormozaffar, M., “Solving Partial Differential Equations with Optimization Methods”, ISME 2001, Proceedings of 2nd Student Conferences of

5

Iranian Society of Mechanical Engineering, Orumieh University, Orumieh, Iran, 2001. 10.

Shiari, B. and Mosafer, M., “Thermal Shocks Response of Layered Anisotropic Media”, AERO 2000, Proceedings of 1st International and 3rd Bi-annual National Conferences of Iranian Society of Aerospace Engineering, Sharif University of Technology, Tehran, Iran, 2000.

11.

Nariman-Zadeh, N. and Mosafer, M., “Evolution Strategies in the Design of PID Controllers”, ISA’2000, Proceedings of International ICSC Congress on Intelligent Systems and Applications, University of Wollongong, Australia, December 12-15, 2000.

6