Computer Assembly

Computer Assembly

1. Layout computer casing on a flat table

2. Screw down the mother board to its proper allocation

• EPOCH • ASUS • MSI

3. Insert and secure the microprocessor in its mother board slot Pentium 1 900 mhz Pentium 2 1.7 Ghz Pentium 3 1.6 Ghz Pentium 4 2.8 Ghz Duo Core Quad Core

4. Cap the microprocessor with heat sink and exhaust fan

Exhaust fans are used to regulate the temperature of the microprocessor as the heat sink absorbs excessive heat from the processor chip. Modern microcomputers use liquid plasma to cool off the CPU’s temperature.

5. Insert the RAM module into its slot on the motherboard.

Dynamic Random Access Memory Static Random Access Memory

10.Connect the floppy and hard disk drives using cable to the mother board Bus Cable SATA Cables

6. Insert the audio card to its proper slot to the mother board.

Real Tek SONY Built-in

7. Screw the floppy disk drive into the computer casing

8. Screw the hard disk drive into the computer casing SEA GATE 120 GB MAXTOR 320 GB

9. Screw the CD or DVD drive into the computer casing

SONY CD 56x SAMSUNG DVD WRITER 64x

11. Install the power supply into the computer casing.

12. Check if all cables are properly inserted.

13. Screw up the computer case

14. Connect the keyboard and mouse to PS2/USB ports.

ERGONOMIC KEYBOARD INFRARED KEYBOARD WIRELESS KEYBOARD BLUETOOTH MOUSE/WIRELESS MOUSE

15. Plug in the computer to the proper voltage.