Colaquat Phc

Cola®Quat PHC CTFA/INCI: Water, Propylene glycol; Linoleamidopropyl PG-dimonium chloride phosphate; Dihydroxypropyl PEG-5 Linoleammonium Chloride; Glycol stearate; Sodium laureth sulfate; Hexylene glycol

DESCRIPTION Cola®Quat PHC is a powerful conditioning agent combined with a pearlizing compound and is designed to provide superior wet comb-out and control of fly-away hair. It can be used as a dilution in water or combined with a built shampoo where the addition of Cola®Quat PHC can create a pearly 2-in-1 shampoo from an existing formula. The primary conditioning agents are derived from safflower and soybean containing essential fatty acids that have been identified as crucial for the maintenance of healthy scalp and hair conditions. Cola®Quat PHC is free of polymeric materials and silicones that can build up on the hair resulting in a flat, over-conditioned look.

USE LEVELS AND CONDITIONS Cola®Quat PHC can be added to existing shampoo bases to create a 2-in-1 pearlized shampoo at a level of 5% to 10% by weight. Due to the strong cationic nature of Cola®Quat PHC, it may not be immediately compatible with systems containing anionic polymers or formulas that do not contain an amphoteric compound. The addition of a betaine such as Cola®Teric COAB or a cocoamphodiacetate such as Cola®Teric CDCX LV will mitigate any negative interactions when pre-blended with PHC. When used by itself to create a hair conditioner, Cola®Quat PHC can simply be mixed with a saline solution to make a highly functional luxurious hair conditioner. Use levels of Cola®Quat PHC would range in the 20% to 30% range. Some examples of formulations are given on the back of this brochure.

TYPICAL PROPERTIES Appearance and Odor: pH (10% in water): Activity: Viscosity: Specific Gravity: Solubility:

225 Colonial Drive

Opaque, light amber fluid 6.9 36% 4500 cps. – 5000 cps. 1.01 at 25oC Soluble in all proportions in water without the formulation of gel phases.

South Pittsburg, TN 37380

Ph: 423-837-8800

Fax: 423-837-3888

FORMULATIONS COMPOUND PHASE A: Cola®Teric COAB Cola®Mid C Cola®Quat PHC

Conditioning Shampoo Concentrate WT % DESCRIPTION 35.0 5.0 10.0

Cocamidopropyl Betaine Cocamide DEA Cationic Blend

FUNCTION Viscosity Builder Foam Booster Conditioning & Pearl

PHASE B: Colonial ALS 30.0 Ammonium Laureth Sulfate Primary Surfactant Colonial ALES-60 20.0 Ammonium Lauryl Sulfate Primary Surfactant Preparation: Blend ingredients in Phase A until uniform, no heat is necessary. Add ingredients in Phase B sequentially with continued mixing until product is homogenous. Avoid aeration at all times, adjust final pH to 6.5-7.0 with 50% citric acid then add fragrance, color, and preservative as needed. Combine 25% of the prepared concentrate with 75% of a NaCl solution to create the finished shampoo. The final viscosity can be adjusted by the amount of salt used. Our recommendation is about 2% NaCl (2 gm. NaCl/100 ml. Water) to give a viscosity of about 12,000 cps.

COMPOUND 1% NaCl Solution Cola®Quat PHC

PEARLIZED HAIR CONDITIONER WT% DESCRIPTION FUNCTION 75 Saline Solution Concentrate let-down 25 Cationic Blend Conditioning & Pearl

Preparation: Prepare saline solution (1 gm. NaCl/100 ml. of water), then slowly add Cola®Quat PHC with thorough mixing. Add color, fragrance, and preservative as needed. Resulting pH is 6.8-7.0 at 1000 cps

LAST UPDATED 08/09/2006

WARRANTY Colonial Chemical guarantees that its products meet published specifications. No other warranties or guarantees are expressed or implied because the use of this material is beyond the control of Colonial Chemical.

Colonial Chemical, Inc. www.colonialchem.com 225 Colonial Drive South Pittsburg, TN 37380

225 Colonial Drive

South Pittsburg, TN 37380

Ph: 423-837-8800 Fax: 423-837-3888

Ph: 423-837-8800

Fax: 423-837-3888