Colamulse Tge

®

COLA MULSE TGE TRIGLYCERIDE EMULSIFIER

benefits

INCI DESIGNATION: Water, Sodium tridecyl ether sulfate, Sodium lauroamphoacetate, Cocamide MEA CAS #: 7732-18-5, 25446-78-0, 14350-96-0, 68140-00-1 EINECS #: 231-791-2, 246-985-2, 271-949-8, 268-770-2

• High oil level delivery • High foam cleansers • Easily rinsed • Non-irritating • Easily fragranced • Lubricious application • Soft afterfeel • Long-term skin conditioning

typical properties

description Cola®Mulse TGE is designed to produce opaque emulsions of typical triglyceride oils without the use of heat. Up to 30 wt.% of an oil can be fully

Appearance:

Hazy viscous Liquid

emulsified into water for a stable dispersion. The resulting product can be

Color, Gardner:

3 max.

more fully viscosified with the inclusion of various polymeric agents such

pH, 10% Solution

8.5 – 9.5

as guar, xanthan, or cellulosic gums. The dispersion of these polymers into

Viscosity:

< 5000 CPS

Solids:

48% – 52%

a water phase followed by the addition of preblended Cola®Mulse TGE / triglyceride can yield highly viscous, foaming products. Other actives such as humectants, alpha hydroxy acids, and proteins can be added to the aqueous phase also. Care must be taken when using cationic materials as these may destabilize the emulsion. Other oil soluble additives such as vitamins, esters, and silicones can be included provided they are soluble themselves in the oil of choice. Typical formulations utilize triglyceride oils from 5% to 20%. It is recommended to use an equivalent amount of Cola®Mulse TGE. Other oils such as petrolatum and mineral oil can also be used. Mild heat during the mixing phase with adequate homogenization will ensure a uniform stable product.

f o r m u l a t i o n body b od y w wash a sh l ot i on COMPOUND

Wt. %

Phase A.

Water Cola®Lipid C Cola®Moist 200 Cola®Mulse TGE

54.50 6.00 1.00 18.00

Phase B.

Activsoft C-17 (cationic guar) Safflower Oil Vitamin E Acetate

2.00

TOTAL

18.00 0.50 100.00

Appearance: Opaque white emulsion pH: 5.5 - 6.5 with citric acid Viscosity: ~30,000 CPS PROCEDURE: Combine ingredients as shown in separate phases. Apply heat to both sufficient to achieve a smooth mixture with stirring. Add Phase B to Phase A with continued stirring until homogenous. Adjust pH to 5.5 - 6.0 with citric acid. Stir-cool and add color, fragrance, and preservative as needed.

COLONIAL CHEMICAL, INC. 225 Colonial Drive South Pittsburg, TN 37380 Phone: 423-837-8800 Fax: 423-837-3888 www.colonialchem.com WARRANTY No warranties beyond the guarantee that Colonial Chemical products are manufactured to specs are expressed or implied, since the use of material is beyond our control. Technical information contained herein is believed to be accurate. However, it is furnished without charge or obligation and is given and accepted at the recipient’s sole risk. No guarantee of the accuracy of the information is made and the products discussed are sold without conditions or warranties expressed or implied. Purchasers should make their own tests and determine suitability of the product for their particular purposes. Nothing contained herein shall be considered a recommendation for any use that may infringe upon patent rights. COLONIAL CHEMICAL, INC. • 225 Colonial Drive • South Pittsburg, TN 37380 Phone: 423-837-8800 • Fax: 423-837-3888

© Copyright 2008, Colonial Chemical, Inc. All rights reserved.