Coffman Stairs

STAIR PARTS BUYER’S GUIDE

®

STAIRS Crafting Quality Stair Parts for Over 125 Years.

A Company of VISADOR Holding Corporation.

Table of Contents SECTION

PAGE NUMBER

Anatomy of a Stair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stair Building Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Profile Index — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tru-Line Balustrade System . . . . . . . . . . . . . . . . . . . . . . . . . . . Traditional — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Classic — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bristol — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Marion — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chippendale — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Victorian — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Art Deco — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Liberty — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Craftsman — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hampton — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Richmond — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Virginian — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wall Rails — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fittings — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Starting Steps — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . Treads, Risers and Accessories — Hardwood . . . . Box Newel Collection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Forged Balustrade Collection . . . . . . . . . . . . . . . . . . . . . . . . . Wonderail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hardware and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tread Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rosettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Newel Drops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Profile Index — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Traditional — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Georgian — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stafford — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fittings — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kent — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Southampton — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Starting Steps — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Treads, Risers and Accessories — Hemlock . . . . . Spindles and Tops — Hemlock . . . . . . . . . . . . . . . . . . . . . . . Ordering Specs — Newels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ordering Specs — Balusters . . . . . . . . . . . . . . . . . . . . . . . . . . . Ordering Specs — Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ordering Specs — Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repetitive Specials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

3 3 4, 5 6, 7 8, 9 10, 11 12, 13 14, 15 14, 15 16, 17 16, 17 18, 19 20, 21 22 23 23 23 24, 25 26 27 28, 29 30–33 34, 35 36 36 36 36 37 37 38 39 39 40 41 42 42 43 44, 45 46 47 48, 49 50 51

“Wood products have been our business since 1874.” Today, our three manufacturing locations, located in the heart of hardwood sources, total over one half million square feet under roof. We are vertically integrated from rough sawn, green lumber through finish sanded and packed products. We continually examine all new technology, machinery and techniques of our industry, and have implemented elements to enhance our business and keep us on the leading edge of the industry.

Marion Plant 1

Marion Plant 2

Marion Plant 3 COFFMAN STAIR PARTS • SINCE 1874

STAIR ANATOMY C-7098 Gooseneck 1-Riser No Cap C-4046 Landing Newel

C-7021 Quarterturn Cap

C-7086 Gooseneck Right Hand 2-Riser With Cap C-7337 Rosette C-4015 Landing Newel C-7020 Tandem Cap

C-5070 Baluster

C-6045 Shoe Rail

C-6050 Fillet C-8070 Coped Tread

C-7099 Gooseneck 2-Riser No Cap C-6010 Handrail C-7010 Starting Easing C-4011 Newel

C-7065 Gooseneck Right Hand 2-Riser With Cap

C-7089 Gooseneck 2-Riser With Cap C-7098 Gooseneck 1-Riser No Cap

C-4015 Landing Newel

C-4042 Newel

C-5015-39" (Second Baluster On Tread)

C-4040 Starting Newel

C-5015-36" (First Baluster On Tread) C-7045 Right Hand Turnout

C-4064 Starting Newel C-8029 Tread Bracket C-8590 Landing Tread C-4015 Landing Newel

C-8015 Starting Step

C-8028 Tread Bracket C-7030 Left Hand Volute

C-4063 Starting Newel

C-8971 Tread Cap C-8976 Riser Cap

STAIR BUILDING GUIDE EXCELLENT TRAINING AND REFERENCE GUIDE FOR EVERYONE INVOLVED WITH THE PURCHASING, SALES AND INSTALLATION OF STAIR PARTS.

CONVENIENT SIZE: 7-1/4" X 9" REFERENCE CHARTS

This instruction manual is the first comprehensive visual book on stair building. The 14 chapters contain over 475 black and white photographs with detailed instructions, illustrations and reference tables. Each indexed chapter of this Guide visually deals with one segment of the installation process. Dozens of photographs cover each section in depth, allowing you to see actual job site conditions at each stage of the installation process. The order of the chapters will allow the beginning carpenter to see the installation process from start to finish, with references to similar concepts listed where necessary for a more complete understanding. And for the more experienced stair installer looking for specific information, the one-subject chapters, index, and reference materials will provide information for a lifetime of stair building. COFFMAN STAIR PARTS • SINCE 1874

STEP-BY-STEP PHOTOS

IN-DEPTH DETAILS

ONE-SUBJECT CHAPTERS

CLEARLY WRITTEN

Contents by chapter: Chapter 1 STAIR BASICS Chapter 2 PART INFORMATION Chapter 3 ROUGH STAIR Chapter 4 STAIR BODY Chapter 5 BALUSTRADE LAYOUT Chapter 6 NEWELS Chapter 7 RAIL AND FITTINGS

Chapter 8 BALUSTERS Chapter 9 CURVED RAIL Chapter 10 WONDERAIL Chapter 11 FORGED Chapter 12 HARDWARE Chapter 13 REFERENCE Chapter 14 GLOSSARY / INDEX

3

HARDWOOD PROFILE INDEX Coffman’s profile index presents examples of newels, balusters and handrails for all of the Coffman families. A choice of a profile that matches your architectural style will lead you to a specific Coffman family.

You may also go outside the family lines and combine products to create your own style. What ever you choose, it will be one of America’s most beautiful stairways...built with Coffman Stair Parts, the industry leader since 1874.

NEWELS OVER-THE-POST

C-4010 Page 8

C-4019 Page 8

C-4030 Page 8

C-4510 Page 18

C-4511 Page 18

C-4530 C-4531 C-4563 C-4130 C-4130-F C-4130-R C-4210 C-4270 C-4271 Page 18 Page 18 Page 18 Page 12 Page 12 Page 12 Page 10 Page 14 Page 16

C-4272 Page 14

C-4810 Page 16

NEWELS P OST-TO-POST (continued below)

C-4040 Page 9

C-4040-BT C-4040-S Page 9 Page 9

C-4070 C-4540-BT C-4544-BT C-4550-BT C-4560-BT C-4150 Page 22 Page 19 Page 19 Page 19 Page 19 Page 13

C-4150-F Page 13

C-4150-R Page 13

C-4001 Pages 11, 22

C-4004 Pages 11, 22

C-4004-BT Pages 11, 22

6 (continued from above)

NEWELS POST-TO-POST

C-4007 Page 11

C-4240 Page 11

C-4280 Page 15

C-4281 Page 17

C-4282 Page 15

C-4840 Page 17

C-4074 Page 20

C-4076 Page 20

C-4075 Page 29

C-4077 Page 29

C-4095 Page 29

C-4096 Page 29

C-4097 Page 28

Additional Box Newels can be viewed on pages 28 and 29.

4

COFFMAN STAIR PARTS • SINCE 1874

HARDWOOD PROFILE INDEX

1

BALUSTERS PIN TOP

2

C-5015 Pages 8, 9,18

C-5025 Page 8

C-5035 Page 8

C-5040 Page 8

C-5050 Page 9

C-5060 Page 21

C-5067 Pages 9, 19

C-5070 Page 9

C-5610 C-5661 Pages Pages 8, 10,11,18 18, 19

C-5845 Pages 16, 17

C-5151 Page s 12, 13

C-5151-F C-5151-R Pages Pages 12, 13 12, 13

C-5141 Page 13

C-5141-F C-5141-R C-5201 Page 13 Page 13 Page 15

C-5211 Pages 14, 15

C-5231 Page 16, 17

C-5251 Pages 14, 15

C-5611 Pages 10, 11

C-5221 Page 17

C-5241 Page 15

C-5360 Page 21

C-5601 Pages 11, 22

BALUSTERS SQUARE TOP

C-5105 Pages 9, 19

C-5005 Pages 9, 19, 22

RAILS

2

C-6300

C-6301

C-6302

C-6700 P

C-6700 P1

C-6770 P

C-6000 P

C-6005 P1

1-5/8w X 5-1/2h

1-5/8w X 5-1/2h

1-5/8w X 2-3/4h

2-3/4w X 1-5/8h

2-3/4w X 1-5/8h

2-1/4w X 1-3/4h

1-3/4w X 2-3/32h

2-17/32w X 2-5/16h

Page 20

Page 20

Page 20

Page 20

Page 20

Page 20

Page 20

Page 22

2

RAILS

2

23

2

2

3

27

C-6510

C-6010

C-6210-W

C-6410

C-6610

C-6810

C-6110

C-6719

2-1/4w X 2-3/8h

2-1/4w X 2-3/8h

2-5/8w X 2-3/8h

2-5/8w X 2-3/8h

2-5/8w X 2h

2-3/8w X 2-7/8h

2-3/4w X 2-3/4h

2-5/8w X 3h

Pages 18, 19

Pages 8, 9

Pages 10, 11, 16, 17

Page 23

Page 23

Page 16, 17

Pages 12, 13

Pages 14, 15

COFFMAN STAIR PARTS • SINCE 1874

5

TRU-LINE BALUSTRADE SYSTEM

™

NEW! Revolutionary Adjustable Baluster Tops. A movable two-part system. PERFECT ALIGNMENT On EVERY stair design.

+ =

COST EFFECTIVE No plowed rail and fillet to purchase or install.

INCREASED STRENGTH TRU-LINE provides pin top baluster strength with the desired look of a square top system. PERFECTION

TRU-LINE, an exclusive, Adjustable Balustrade System created by Coffman Stairs. This is the only stair system available that allows perfect alignment of the upper baluster blocks with the historically correct look of even lower baluster squares. They are perfect at any stair angle. Perfect at any rake rail height. Perfect for any number of balusters per tread. TRU-LINE, perfect every time.

EASY ORDERING One baluster length replaces the 34” through 41” lengths. Simply count the number of balusters needed.

EASY INSTALLATION Trim the movable top to the correct angle and secure in place.

PERFECT FOR CURVED STAIRS No plowing of rail or curved fillet. Perfect on inside and outside curves. Perfect on multiple balusters per tread. Equal, balanced appearance on double-sided curves and from rake to balcony.

Easy installation. Trim the top to the correct angle and secure into place under the rail.

Patent Pending

™

6

COFFMAN STAIR PARTS • SINCE 1874

TOP BLOCKS TRU-LINE BALUSTRADE SYSTEM ™

Your balusters will line up perfectly at the top...every time. +

+ C-5576

13 7/16"

C-5575

+ 13 3/8"

41"

Top Block Installation Instructions

+ 13 3/8"

C-5575

C-5575

13 3/8"

41"

41"

41"

13 3/8"

15"

15"

15"

5 11/16"

4 1/8"

4 1/8"

4 1/8"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

C-5511 1 3/4" Sq.

C-5551 1 3/4" Sq.

C-5531 1 3/4" Sq.

C-5541 1 3/4" Sq.

1-3/4” Square Base - 7/8” Diameter Top

+

+ 12 15/16"

C-5571

C-5570

Cut stair angle on single block.

2 Hold under rail and check plumb.

+ 12 15/16"

C-5570

12 1/8" 41" 10 7/8"

41"

41"

16 5/8"

13 5/8"

1

9 1/2"

5 11/16"

2 11/16"

8 3/4"

8 3/4"

3 Cut all tops, slide onto pretrimmed balusters. Install with standard baluster techniques.

8 1/2"

1 1/4"

1 1/4"

1 1/4"

C-5510 1 1/4" Sq.

C-5515 1 1/4" Sq.

C-5567 1 1/4" Sq.

4

1-1/4” Square Base - 11/16” Diameter Top

Raise top, glue and nail permanently into place.

TRU-LINE Adjustable Top Detail

7 3/8"

1 3/4"

C-5576

7 3/8"

1 3/4"

C-5575

COFFMAN STAIR PARTS • SINCE 1874

6 7/8"

1 1/4"

C-5571

6 7/8"

1 1/4"

C-5570

™

7

TRADITIONAL OVER-THE-POST 2 1/4"

2 3/8" 20 1/2" 31"

1 1/2"

C-6010 1/2"

C-6010

1/2"

C-6016 (7 piece) Bending Rail

10 1/2"

8"

10 1/2"

8"

43"

41"

10 1/2"

8"

32 1/2"

30 1/2"

39"

36"

34"

10 1/2"

8"

1/4"

28 1/2"

25 1/2"

23 1/2"

10 1/2"

8"

8"

10 1/2"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

C-5015 1 1/4" Sq.

C-5015 1 1/4" Sq.

C-5015 1 1/4" Sq.

C-5015 1 1/4" Sq.

C-5015 1 1/4" Sq.

C-5015 1 1/4" Sq.

33 3/4"

36 3/4"

38 3/4"

2 3/8" 31 3/4"

28 3/4"

1/4" 34"

31"

39"

36"

41"

C-6015 Bending Mould 2 1/4"

2 1/4"

C-6016 (9 piece) Bending Rail

2 1/4"

2 1/4"

2 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

C-5025 1 1/4" Sq.

C-5025 1 1/4" Sq.

C-5025 1 1/4" Sq.

C-5025 1 1/4" Sq.

C-5025 1 1/4" Sq. 6"

6" 6"

6" 6" 25"

30"

28"

31"

33"

36"

34"

35"

39"

31"

6"

6"

6"

6"

6"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/8"

C-5035 C-5035 C-5035 C-5035 C-5035 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq.

36"

34"

1 1/8"

1 1/8"

39"

1 1/8"

31"

12 15/16"

5 11/16"

5 11/16"

8 1/2"

8 1/2"

8 1/2"

5 11/16"

5 11/16"

13 1/2"

11 1/2"

1 1/4"

1 1/4"

41"

39" 36"

5 11/16"

1 1/4"

1 1/8"

12 15/16"

12 15/16"

10 15/16" 34"

7 15/16"

41"

2 7/8"

2 7/8"

2 7/8"

2 7/8"

41"

2 7/8"

1 1/4"

1 1/4"

C-5610 C-5610 C-5610 C-5610 C-5610 C-5040 C-5040 C-5040 C-5040 C-5040 1 1/8" Dia. 1 1/8" Dia. 1 1/8" Dia. 1 1/8" Dia. 1 1/8" Dia. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq.

1" 1"

1"

1"

28 7/16"

ADJUSTABLE NEWEL

30"

Enlarged for detail.

31 1/2" 30"

44"

49"

40"

5 9/16"

41 1/2"

9"

9"

9"

1"

1"

9" 9"

2 1/4"

2 3/4"

2 3/4"

C-4050 2 1/4" Dia.

C-4060 2 3/4" Dia. Adjustable

C-4061 2 3/4" Dia. Adjustable

Check local building codes.

SEE PAGE 45

C-4063 2 3/4" Dia. use with Volute

1"

1"

1"

Newel top diameter is 1".

27"

82 1/2"

1"

1"

1"

27"

2 3/4"

27"

1"

1"

27"

1"

27"

6 7/8"

1"

1"

30" 30"

30" 50 1/2"

60"

27"

27"

41"

45 1/2"

44"

13"

2 3/4"

C-4064 2 3/4" Dia. use with Turnout

8

2 3/4"

14 1/2"

2 3/4"

C-4066 C-4065 2 3/4" Dia. 2 3/4" Dia. Adjustable Adjustable

3"

3"

C-4035 3" Sq.

C-4038 3" Sq.

24" 48"

32"

54 1/2"

40 1/2"

17 1/8"

16"

13"

16"

3"

3"

3"

3"

3"

3"

C-4012 C-4014 3" Sq. 3" Sq. Adjustable Adjustable

C-4010 3" Sq.

C-4011 3" Sq.

C-4015 3" Sq.

C-4017 3" Sq.

C-4018 3" Sq.

C-4019 3" Sq.

12"

3"

82 1/2"

68 1/2"

44"

40"

13"

C-4030 3" Sq.

60"

27"

41"

44" 54 1/2"

32"

10 1/2"

9"

27"

27"

3"

3"

COFFMAN STAIR PARTS • SINCE 1874

TRADITIONAL POST-TO-POST 2 1/4"

2 1/4"

2 3/8"

2 3/8" 1"

1" 3/16" 1 1/2"

25/64" 1 1/4" 1 1/2"

1 1/4" 2 1/2"

1 3/4 " 2 1/2"

C-6010 P with Fillet

C-6031 Sub Rail with Fillet

C-6032 Sub Rail with Fillet

C-6010

C-7098 1 Riser No Cap

3/8"

25/64"

C-7099 2 Riser No Cap

Requires C-7237 Rosette on angle cut. 1 3/4"

1 1/4"

3/8"

25/64"

2 1/2"

3 1/8"

C-6045 Shoe Rail with Fillet

C-6006 Shoe Rail with Fillet

3/8"

25/64" 1 1/4"

1 3/4"

C-6050 Fillet

C-6007 Fillet

1"

3/4"

2 3/8" 5"

TWO OPTIONS AVAILABLE

Enlarged for detail.

Enlarged for detail. 2 3/8"

2 3/8"

10"

13

SPECIFY BT

2 3/8" 2 3/8"

2 3/8" 2 3/8"

2 3/8"

2 3/8"

10"

13"

13"

5"

23 1/4"

23 1/4"

2 3/8" 2 3/8"

5"

5"

5"

5" 18 1/4"

72"

23 1/4" 18 1/4"

59 1/2"

53 1/2"

47 1/2"

82"

59 1/2"

59 1/2"

23 1/4"

68"

23 1/4"

23 1/4"

18 1/4"

59 1/2"

18 1/4" 47 1/2"

23 1/4"

53 1/2" 37 3/8"

25 7/8"

28 7/8" 27 7/8"

21 7/8"

16 7/8"

51 3/8"

33 3/8"

20 7/8"

23 7/8" 22 7/8"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

C-4040S 3" Sq.

C-4042S 3" Sq.

C-4045S 3" Sq.

C-4046S 3" Sq.

C-4040 3" Sq.

C-4042 3" Sq.

C-4045 3" Sq.

C-4046 3" Sq.

C-4046 L 3" Sq.

C-4055 3" Sq.

C-4058 3" Sq.

5 3/4" 5 3/4"

4 1/2"

4 1/2"

5 3/4"

17 1/2" 20 1/2"

17 1/2"

28 1/2"

25 1/2"

23 1/2"

32 1/2"

30 1/2"

17 1/2"

31"

36"

30"

19"

19"

41" 39"

36"

34"

43"

41"

36"

34"

17 3/4" 12 3/4"

8"

6 3/4"

10 1/2" 8"

10 1/2"

10 1/2"

8"

10 1/2"

8"

10 1/2"

8"

8"

10 1/2"

12 1/2"

10 1/2"

1 3/4"

1 3/4"

1 3/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

C-5005 1 3/4" Sq.

C-5005 1 3/4" Sq.

C-5005 1 3/4" Sq.

C-5015 1 1/4" Sq.

C-5015 1 1/4" Sq.

C-5015 1 1/4" Sq.

C-5015 1 1/4" Sq.

C-5015 1 1/4" Sq.

C-5015 1 1/4" Sq.

C-5050 1 1/4" Sq.

C-5050 1 1/4" Sq.

5 1/8" 5 1/8"

5 1/8" 5 3/8"

5 3/8"

5 3/8"

5 3/4" 5 3/4"

5 3/8"

5 1/8" 22"

24"

41"

39" 31"

16 1/8"

36"

34"

17 1/2"

24"

24" 19"

5 3/8"

5 1/8"

19 1/8"

31"

21 1/8"

24 1/8"

17 1/2" 41"

39"

36"

34"

26 1/8"

36"

41"

17 3/4" 6 7/8"

6 7/8"

6 7/8"

1 1/4"

1 1/4"

1 1/4"

C-5067 1 1/4" Sq.

C-5067 1 1/4" Sq.

C-5067 1 1/4" Sq.

9 7/8" 1 1/4"

11 7/8"

1 1/4"

C-5067 C-5067 1 1/4" Sq. 1 1/4" Sq.

COFFMAN STAIR PARTS • SINCE 1874

9 1/2"

9 1/2"

9 1/2"

9 1/2"

9 1/2"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

C-5070 1 1/4" Sq.

C-5070 1 1/4" Sq.

C-5070 1 1/4" Sq.

C-5070 1 1/4" Sq.

C-5070 1 1/4" Sq.

12 3/4"

1 1/4"

1 1/4"

C-5105 C-5105 1 1/4" Sq. 1 1/4" Sq.

9

CLASSIC OVER-THE-POST 2 5/8"

2 3/8"

1/2"

2"

C-6210-W

2 3/8"

C-6210-W 9/16"

1/4"

C-6015 Bending Mould 2 3/8"

C-6216-W Bending Rail

1/4"

6"

6" 6"

6" 6"

2 7/8"

2 7/8"

2 7/8"

2 7/8"

12 15/16"

12 15/16"

2 7/8" 12 15/16"

10 15/16"

7 15/16" 31"

36"

34"

5 11/16"

5 11/16"

5 11/16"

8 1/2"

8 1/2"

8 1/2"

41"

39"

5 11/16"

5 11/16"

13 1/2"

11 1/2"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

C-5611 1 3/4" Sq.

C-5611 1 3/4" Sq.

C-5611 1 3/4" Sq.

C-5611 1 3/4" Sq.

C-5611 1 3/4" Sq. 1" 5 1/2" 2 7/8"

1" 1" 5 1/2"

1"

5 1/2"

5 1/2"

2 7/8"

12 15/16"

1" 5 1/2"

2 7/8"

49"

12 15/16" 12 15/16"

5 11/16"

2 7/8"

12 15/16"

2 7/8"

12 15/16"

5 11/16"

44"

41"

5 11/16"

40" 5 11/16" 12"

16"

60"

5 11/16"

12"

13"

9"

32"

3 3/8"

3 3/8"

3 3/8"

3 1/2"

3 1/2"

C-4660 3 3/8" Dia. Adjustable

C-4662 3 3/8" Dia. Adjustable

C-4661 3 3/8" Dia. use with Volute

C-4210 3 1/2" Sq. use with Starting Easing

C-4215 3 1/2" Sq. Intermediate or Landing

Newel top diameter is 2-1/8" 1"

1"

6"

6" 6"

6" 6"

2 7/8"

2 7/8" 7 15/16" 31"

10 15/16" 34"

2 7/8"

2 7/8"

2 7/8" 12 15/16"

41"

39"

5 11/16"

5 11/16"

5 11/16"

8 1/2"

8 1/2"

8 1/2"

5 11/16"

11 1/2"

30"

30"

12 15/16"

12 15/16" 36"

1"

1"

1"

1"

49"

30"

50 1/2"

5 11/16" 41 1/2"

40"

9"

10 1/2"

9"

9"

45 1/2"

44"

13"

9"

9"

13 1/2"

30"

30"

31 1/2"

14 1/2"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

2 3/4"

2 3/4"

2 3/4"

2 3/4"

2 3/4"

2 3/4"

C-5610 1 1/4" Sq.

C-5610 1 1/4" Sq.

C-5610 1 1/4" Sq.

C-5610 1 1/4" Sq.

C-5610 1 1/4" Sq.

C-4060 2 3/4" Dia. Adjustable

C-4061 2 3/4" Dia. Adjustable

C-4063 2 3/4" Dia. use with Volute

C-4064 2 3/4" Dia. use with Turnout

C-4065 2 3/4" Dia. Adjustable

C-4066 2 3/4" Dia. Adjustable

10

COFFMAN STAIR PARTS • SINCE 1874

CLASSIC POST-TO-POST 2 5/8 " 2 5/8" 1 3/4" 3/8" 1"

2 3/8" 3 1/8"

3/8" 2"

1 3/4 " 2"

C-6210-W

C-6210W P1 with Fillet

C-6006 Shoe Rail with Fillet

C-7298-W 1 Riser No Cap 3/8"

1 3/4"

C-7299-W 2 Riser No Cap

C-6007 Fillet C-6210W P1 1 3/4" Plow

C-6210-W

6"

6" 6"

6" 6"

12 15/16"

10 15/16"

7 15/16"

36"

5 11/16"

5 11/16"

5 11/16"

8 1/2"

8 1/2"

8 1/2"

5 11/16"

11 1/2"

31"

13 1/2"

2 7/8"

12 15/16"

12 15/16" 12 15/16"

10 15/16" 34"

7 15/16"

5 11/16"

2 7/8"

2 7/8"

2 7/8"

2 7/8"

41"

39" 34"

6"

6" 6"

12 15/16"

12 15/16"

2 7/8" 31"

2 7/8"

2 7/8"

2 7/8"

6"

6"

2 7/8"

41"

39" 36"

5 11/16"

5 11/16"

5 11/16"

8 1/2"

8 1/2"

8 1/2"

5 11/16"

5 11/16"

11 1/2"

13 1/2"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

C-5601 1 3/4" Sq.

C-5601 1 3/4" Sq.

C-5601 1 3/4" Sq.

C-5601 1 3/4" Sq.

C-5601 1 3/4" Sq.

C-5610 1 1/4" Sq.

C-5610 1 1/4" Sq.

C-5610 1 1/4" Sq.

C-5610 1 1/4" Sq.

C-5610 1 1/4" Sq. 3 1/2"

Enlarged for detail. 3 1/2" 3 1/2"

6"

6" 6"

2 7/8"

12 15/16"

10 15/16" 31"

12 15/16"

9 1/2"

9 1/2"

41"

39" 36"

34"

17 1/2"

5 11/16"

5 11/16"

17 1/2"

5 11/16"

5 11/16"

8 1/2"

3 1/2"

17 1/2" 12 15/16"

5 11/16"

2 7/8"

2 7/8"

16"

2 7/8"

2 7/8" 7 15/16"

16"

6"

6"

11 1/2"

8 1/2"

8 1/2"

72"

17 1/2" 13 1/2"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

C-5611 1 3/4" Sq.

C-5611 1 3/4" Sq.

C-5611 1 3/4" Sq.

C-5611 1 3/4" Sq.

C-5611 1 3/4" Sq.

TWO OPTIONS AVAILABLE

6

56"

47 1/2"

25 1/2"

17"

Enlarged for detail.

35"

59 1/2"

22 1/2"

3 1/2"

3 1/2"

3 1/2"

3 1/2"

C-4001 3 1/2" Sq.

C-4002 3 1/2" Sq.

C-4003 3 1/2" Sq.

C-4003 L 3 1/2" Sq.

4 3/4" 4 13/16"

Enlarged for detail.

Enlarged for detail. SPECIFY BT 3 1/2"

13"

4 3/4"

3 1/2"

4 13/16" 4 13/16"

4 3/4"

7 3/16"

13"

4 13/16"

6 1/2"

2 7/8"

10 15/16"

2 7/8" 17 1/2"

17 1/2"

10 15/16"

2 7/8"

7 3/16"

17 1/2" 72"

56"

47 1/2"

56" 56"

471/2"

5 11/16"

10 15/16" 47 1/2"

67 1/4"

51 1/4"

42 3/4"

56"

72"

5 11/16"

5 11/16"

22"

5 11/16"

10 15/16" 59 1/2"

34 11/16"

28 1/2"

20"

2 7/8"

13"

6 1/2"

3 1/2"

24 1/2"

16"

22 3/16"

3 1/2"

3 1/2"

3 1/2"

3 1/2"

3 1/2"

3 1/2"

3 1/2"

3 1/2"

3 1/2"

3 1/2"

C-4007 3 1/2" Sq.

C-4008 3 1/2" Sq.

C-4009 3 1/2" Sq.

C-4004 3 1/2" Sq.

C-4005 3 1/2" Sq.

C-4006 3 1/2" Sq.

C-4240 3 1/2" Sq.

C-4242 3 1/2" Sq.

C-4245 3 1/2" Sq.

C-4245 L 3 1/2" Sq.

COFFMAN STAIR PARTS • SINCE 1874

11

BRISTOL OVER-THE-POST 19/32" 7/32"

2 3/4 "

2 1/2"

2 3/4"

1/2"

2 1/4 "

11/32"

C-6110

C-6110

C-6115 Bending Mould

C-6116 Bending Rail

1"

1"

20"

1" 1"

1"

• Newel top diameters are 2-15/16".

60"

20" 7"

20"

• 34-inch Bristol Balusters can be trimmed for 31-inch applications.

20"

20"

49" 7"

44"

41"

7"

40" 7"

7"

12" 16"

12" 6 5/8"

32"

6 1/2"

6 7/8"

3"

3"

3"

3 1/4"

3 1/4"

15 5/8"

C-4160 3" Dia. Adjustable

C-4165 3" Dia. Adjustable

C-4163 3" Dia.

C-4130 3 1/4" Sq.

C-4135 3 1/4" Sq.

8 5/8"

11 7/8"

13"

9"

34"

21"

18 7/8"

41"

39"

36"

5"

5"

5"

5"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

C-5151 1 3/4" Sq.

C-5151 1 3/4" Sq.

C-5151 1 3/4" Sq.

C-5151 1 3/4" Sq.

OPTIONS AVAILABLE

Enlarged for detail.

FLUTE

1"

1"

REED

20"

1" 1"

1"

60"

20" 7"

20" 20" 6 5/8"

6 1/2"

44"

6 7/8"

11 7/8"

41"

7"

40"

8 5/8"

7"

15 5/8"

7"

12"

21"

18 7/8"

16" 12"

36"

34"

20"

49" 7"

13"

9"

32"

41"

39"

5"

5"

5"

5"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

C-5151-F 1 3/4" Sq. Flute

C-5151-F 1 3/4" Sq. Flute

C-5151-F 1 3/4" Sq. Flute

C-5151-F 1 3/4" Sq. Flute

3"

3"

3"

3 1/4"

3 1/4"

C-4160-F 3" Dia. Flute Adjustable

C-4165-F 3" Dia. Flute Adjustable

C-4163-F 3" Dia. Flute

C-4130-F 3 1/4" Sq. Flute

C-4135-F 3 1/4" Sq. Flute 1"

1"

20"

1" 1"

1" 6 5/8" 6 7/8"

20" 15 5/8"

18 7/8"

36"

7"

44" 41"

39"

5"

5"

5"

5"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

20"

49"

21"

41"

7"

40"

34"

7"

20"

8 5/8"

11 7/8"

60"

20"

6 1/2"

7"

7"

12" 16"

12"

13"

9"

32"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

3"

3"

3"

3 1/4"

3 1/4"

C-5151-R 1 3/4" Sq. Reed

C-5151-R 1 3/4" Sq. Reed

C-5151-R 1 3/4" Sq. Reed

C-5151-R 1 3/4" Sq. Reed

C-4160-R 3" Dia. Reed Adjustable

C-4165-R 3" Dia. Reed Adjustable

C-4163-R 3" Dia. Reed

C-4130-R 3 1/4" Sq. Reed

C-4135-R 3 1/4" Sq. Reed

12

COFFMAN STAIR PARTS • SINCE 1874

BRISTOL POST-TO-POST 2 3/4 "

2 3/4 " 1 3/4" 3/8" 1"

2 3/4"

2 3/4" 3 1/8"

C-6006 Shoe Rail with Fillet

3/8"

2 1/4 " 1 3/4 " 2 1/4 "

C-6110

C-6110 P1 with Fillet

3/8"

C-7199 2 Riser No Cap

1 3/4"

C-6007 Fillet

Enlarged for detail.

C-6110 P1 1 3/4" Plow

C-6110

5 1/4"

5 1/4"

5 1/4"

5 1/4"

5"

5 1/4"

12"

5"

15"

5 1/4" 12"

15"

16"

12 1/2"

7"

12 1/2" 12 1/2"

7" 7"

59 1/2"

59 1/2"

26 1/4"

7"

59 1/2"

20 1/4"

19 3/4"

59 1/2"

26 1/4"

19 3/4"

7"

53 1/2"

59 1/2"

22 3/4"

7"

7"

7"

53 1/2"

59 1/2"

22 3/4"

7"

7"

7"

53 1/2"

15"

12 1/2"

12 1/2" 7"

12"

16"

16"

12 1/2"

5 1/4"

5"

16"

16"

5 1/4"

5"

5 1/4"

5"

16"

20 1/4"

5 1/4"

5 1/4"

5"

5 1/4"

20 1/4"

59 1/2" 26 1/4"

59 1/2" 22 3/4"

59 1/2" 19 3/4"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

C-4150 3 1/4" Sq.

C-4152 3 1/4" Sq.

C-4155 3 1/4" Sq.

C-4156 3 1/4" Sq.

C-4150-F 3 1/4" Sq. Flute

C-4152-F 3 1/4" Sq. Flute

C-4155-F 3 1/4" Sq. Flute

C-4156-F 3 1/4" Sq. Flute

C-4150-R 3 1/4" Sq. Reed

C-4152-R 3 1/4" Sq. Reed

C-4155-R 3 1/4" Sq. Reed

C-4156-R 3 1/4" Sq. Reed

6 5/8"

6 1/2"

6 1/2"

6 5/8"

6 7/8" 8 5/8"

8 5/8"

8 5/8"

15 5/8"

11 7/8" 34"

21"

18 7/8" 39"

34"

41"

21"

18 7/8"

15 5/8"

11 7/8"

36"

6 1/2"

6 5/8" 6 7/8"

6 7/8"

11 7/8"

36"

39"

15 5/8"

34"

41"

21"

18 7/8"

36"

39"

41"

5"

5"

5"

5"

5"

5"

5"

5"

5"

5"

5"

5"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

C-5141 1 3/4" Sq.

C-5141 1 3/4" Sq.

C-5141 1 3/4" Sq.

C-5141 1 3/4" Sq.

C-5141-F 1 3/4" Sq. Flute

C-5141-F 1 3/4" Sq. Flute

C-5141-F 1 3/4" Sq. Flute

C-5141-F 1 3/4" Sq. Flute

C-5141-R 1 3/4" Sq. Reed

C-5141-R 1 3/4" Sq. Reed

C-5141-R 1 3/4" Sq. Reed

C-5141-R 1 3/4" Sq. Reed

6 5/8"

6 1/2"

6 5/8"

6 7/8" 8 5/8"

11 7/8"

6 1/2"

11 7/8" 39"

36"

34"

8 5/8"

21"

18 7/8"

41"

6 1/2"

6 7/8"

8 5/8"

15 5/8"

6 5/8"

6 7/8"

15 5/8"

11 7/8"

36"

34"

21"

18 7/8"

41"

39"

15 5/8" 36"

34"

21"

18 7/8"

41"

39"

5"

5"

5"

5"

5"

5"

5"

5"

5"

5"

5"

5"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

C-5151 1 3/4" Sq.

C-5151 1 3/4" Sq.

C-5151 1 3/4" Sq.

C-5151 1 3/4" Sq.

C-5151-F 1 3/4" Sq. Flute

C-5151-F 1 3/4" Sq. Flute

C-5151-F 1 3/4" Sq. Flute

C-5151-F 1 3/4" Sq. Flute

C-5151-R 1 3/4" Sq. Reed

C-5151-R 1 3/4" Sq. Reed

C-5151-R 1 3/4" Sq. Reed

C-5151-R 1 3/4" Sq. Reed

COFFMAN STAIR PARTS • SINCE 1874

13

MARION OVER-THE-POST 2 5/8"

22 1/2"

3"

31"

30 1/2"

27 1/2"

25 1/2"

34"

32 1/2"

41"

39"

36"

2 5/8" 8 1/2"

C-6719 11/16"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

C-5251 1 3/4" Sq.

C-5251 1 3/4" Sq.

C-5251 1 3/4" Sq.

C-5251 1 3/4" Sq.

C-5251 1 3/4" Sq. 1"

3" 1"

C-6719

28"

1" 1"

1"

C-6715 Bending Mould

28" 28" 28"

9/16" 1/4"

28"

49" 44"

60" 41"

40"

31" 11" 3"

15"

11"

C-6716 Bending Rail

12"

9"

3 1/4"

3 1/4"

3 1/4"

3 1/2"

3 1/2"

C-4255 3 1/4" Dia. Adjustable

C-4257 3 1/4" Dia. Adjustable

C-4256 3 1/4" Dia. use with Volute

C-4272 3 1/2" Sq. use with Volute or Starting Easing

C-4277 3 1/2" Sq.

Newel top diameter is 2-3/16"

CHIPPENDALE OVER-THE-POST

7 1/2" 9 1/2"

10 1/2"

12 1/2"

15 1/2"

17 1/2"

9 1/2"

9 1/2"

9 1/2"

9 1/2"

34"

31"

11/16"

41"

39"

36"

5 1/2"

5 1/2"

5 1/2"

5 1/2"

5 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

C-5211 1 3/4" Sq. Flute

C-5211 1 3/4" Sq. Flute

C-5211 1 3/4" Sq. Flute

C-5211 1 3/4" Sq. Flute

C-5211 1 3/4" Sq. Flute

1"

1" 28"

1"

3"

1"

1" 28" 28"

C-6715 Bending Mould 2 5/8"

28"

49"

28"

60"

44 " 41"

40"

31"

11"

9/16" 1/4" 11"

15"

3 1/4"

3 1/4"

3 1/4"

3 1/2"

3 1/2"

C-4250 3 1/4" Dia. Flute Adjustable

C-4252 3 1/4" Dia. Flute Adjustable

C-4251 3 1/4" Dia. Flute use with Volute

C-4270 3 1/2" Sq. Flute use with Volute or Starting Easing

C-4275 3 1/2" Sq. Flute Intermediate or Landing

12"

9"

3" 3"

2 5/8"

C-6719

C-6719

C-6716 Bending Rail

Newel top diameter is 2-3/16"

14

COFFMAN STAIR PARTS • SINCE 1874

MARION POST-TO-POST 2 5/8"

2 5/8"

1 3/4" 3/8" 1"

3"

3"

3 1/8"

C-6006 Shoe Rail with Fillet

3/16" 3/8"

2 5/8"

1 3/4 " 2 5/8"

C-6719

C-7799 2 Riser No Cap

3/8"

1 3/4"

C-6719 P1 with Fillet

C-6007 Fillet

4 1/2"

Enlarged for detail. 13" 4 1/2" 4 1/2"

C-6719 P1 1 3/4" Plow

C-6719

13"

5"

18 1/2"

4 1/2" 5" 6"

6"

22 1/2"

6"

6" 6"

25 1/2"

22 1/2"

16 1/2"

21 1/2"

19 1/2"

31"

18 1/2"

56"

24 1/2"

36"

34"

30 1/2"

27 1/2"

32 1/2"

22 1/2"

72" 48"

26 1/2"

39"

34"

31"

41"

36"

39"

36"

60"

41"

24"

24"

16" 8 1/2"

8 1/2"

8 1/2"

1 3/4"

1 3/4"

1 3/4"

8 1/2" 1 3/4"

8 1/2"

8 1/2"

8 1/2"

1 3/4"

1 3/4"

1 3/4"

8 1/2"

8 1/2"

1 3/4"

1 3/4"

8 1/2" 3 1/2"

3 1/2"

3 1/2"

3 1/2"

C-4282 3 1/2" Sq.

C-4282 L 3 1/2" Sq.

C-4287 3 1/2" Sq.

C-4287 L 3 1/2" Sq.

1 3/4"

C-5251 C-5251 C-5251 C-5251 C-5251 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq.

C-5241 C-5241 C-5241 C-5241 C-5241 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq.

CHIPPENDALE POST-TO-POST 2 5/8"

2 5/8"

1 3/4" 3/8" 3"

3"

1"

3/8"

1 3/4"

3 1/8"

3/16"

1 3/4 " 2 5/8"

C-6719

C-6007 Fillet

C-6006 Shoe Rail with Fillet

3/8"

2 5/8"

C-7799 2 Riser No Cap

C-6719 P1 with Fillet

4 1/2"

Enlarged for detail. C-6719

4 1/2"

1 1/2"

4 1/2"

9 1/2"

9 1/2" 31"

5 1/2"

2 3/4"

2 3/4"

13" 6 3/4"

6 3/4"

9" 56"

9 1/2"

11 1/2"

9 1/2"

9 1/2"

7 1/2"

10 1/2"

12 1/2"

15 1/2"

17 1/2"

13"

9 1/2"

9 1/2"

9 1/2"

9 1/2"

6 3/4"

72" 6 3/4"

48"

9 1/2"

5 1/2"

9 1/2" 41"

39"

36" 5 1/2"

9"

2 3/4"

5"

6"

6 1/2"

34" 5 1/2"

4 1/2"

6"

6" 6"

2 3/4"

13"

5"

C-6719 P1 1 3/4" Plow 6"

13" 4 1/2"

31"

5 1/2"

5 1/2"

34" 5 1/2"

36" 5 1/2"

41"

39" 5 1/2"

36" 60" 24"

24"

5 1/2" 16"

8 1/2" 1 3/4"

8 1/2" 1 3/4"

8 1/2" 1 3/4"

8 1/2" 1 3/4"

8 1/2"

8 1/2" 1 3/4"

1 3/4"

C-5201 C-5201 C-5201 C-5201 C-5201 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. Flute Flute Flute Flute Flute

8 1/2" 1 3/4"

8 1/2" 1 3/4"

8 1/2" 1 3/4"

8 1/2" 1 3/4"

C-5211 C-5211 C-5211 C-5211 C-5211 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. Flute Flute Flute Flute Flute

COFFMAN STAIR PARTS • SINCE 1874

3 1/2"

3 1/2"

3 1/2"

3 1/2"

C-4280 3 1/2" Sq. Flute

C-4280 L 3 1/2" Sq. Flute

C-4285 3 1/2" Sq. Flute

C-4285 L 3 1/2" Sq. Flute

15

VICTORIAN OVER-THE-POST

9/16"

2 5/8"

2 3/8"

1/4"

1/2"

2 3/8"

2 3/8"

2"

C-6210-W

C-6216-W Bending Rail

1/4"

C-6210-W

C-6015 Bending Mould 1"

1" 28"

1" 1"

1" 28" 11 1/2"

18 1/2"

16 1/2"

13 1/2"

28" 28"

8 1/2" 8 1/2"

8 1/2"

8 1/2" 31"

41" 31"

41"

39"

5 1/2"

5 1/2"

5 1/2"

5 1/2"

5 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

8 1/2"

60"

28"

40"

8 1/2"

8 1/2" 36"

34"

49" 44"

11" 11"

15"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

3 1/4"

3 1/4"

C-5231 1 3/4" Sq. Twist

C-5231 1 3/4" Sq. Twist

C-5231 1 3/4" Sq. Twist

C-5231 1 3/4" Sq. Twist

C-5231 1 3/4" Sq. Twist

C-4260 3 1/4" Dia. Twist Adjustable

C-4262 3 1/4" Dia. Twist Adjustable

12"

9" 3 1/4"

3 1/2"

C-4271 C-4261 3 1/2" Sq. 3 1/4" Dia. Twist Twist use with use with Starting Easing Volute Newel top diameter is 2-3/16"

3 1/2"

C-4276 3 1/2" Sq. Twist Intermediate or Landing

ART DECO OVER-THE-POST 23/32"

9/16" 1/4" 1 7/8"

2 7/8"

2 7/8"

2 7/8"

2 3/8"

C-6816 Bending Rail

C-6810

C-6815 Bending Mould

31 1/2"

C-6810 31 1/2" 72"

31 1/2"

24 3/4"

26 3/4"

29 3/4"

36"

34"

31 3/4"

39"

50 1/2"

41"

31 1/2"

48"

40 1/2" 45 1/2"

10"

16 1/2" 9 1/4" 1 9/16"

9 1/4" 1 9/16"

9 1/4" 1 9/16"

9 1/4" 1 9/16"

C-5845 C-5845 C-5845 C-5845 1 9/16" Dia. 1 9/16" Dia. 1 9/16" Dia. 1 9/16" Dia.

NOTE: Placement of Art Deco Newels will sometimes differ from standard newel locations because of the contemporary styling of the Art Deco fittings.

16

14"

9" 3 1/4"

C-4860 3 1/4" Dia. use with Turnout

3 1/4"

3 1/2"

3 1/2"

C-4810 C-4862 C-4815 3 1/2" Sq. 3 1/4" Dia. 3 1/2" Sq. use with Adjustable Intermediate or Landing Vertical Volute or Starting Easing

Newel top diameter is 1-1/8" COFFMAN STAIR PARTS • SINCE 1874

VICTORIAN POST-TO-POST 2 5/8 " 2 5/8" 1 3/4" 3/8" 1"

2 3/8" 3/8" 2"

1 3/4 " 2"

C-6210-W

C-6210W P1 with Fillet

3/8"

1 3/4"

3 1/8"

C-6007 Fillet

C-6006 Shoe Rail with Fillet

C-7299-W 2 Riser No Cap

4 1/2"

Enlarged for detail. 13" 4 1/2" 4 1/2"

C-6210-W

C-6210W P1 1 3/4" Plow

2 3/4"

13"

5" 4 1/2"

6"

6" 6"

6" 6" 2 1/2"

8 1/2"

5 1/2"

7 1/2"

10 1/2"

8 1/2"

8 1/2"

8 1/2"

34"

31" 5 1/2"

5 1/2"

11 1/2"

13 1/2"

16 1/2"

8 1/2"

8 1/2"

8 1/2"

41"

31" 5 1/2"

2 3/4"

13"

13"

6 3/4"

6 3/4"

9" 56"

72" 6 3/4" 36"

48"

8 1/2"

5 1/2"

2 3/4"

18 1/2"

8 1/2"

8 1/2" 39"

36" 5 1/2"

5 1/2"

12 1/2"

9"

2 3/4"

5"

39"

36"

34" 5 1/2"

5 1/2"

5 1/2"

6 3/4"

8 1/2"

60" 24"

41"

24"

5 1/2" 16"

8 1/2"

8 1/2"

8 1/2" 1 3/4"

1 3/4"

8 1/2" 1 3/4"

1 3/4"

8 1/2"

8 1/2"

1 3/4"

1 3/4"

C-5221 C-5221 C-5221 C-5221 C-5221 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. Twist Twist Twist Twist Twist

8 1/2"

8 1/2"

8 1/2"

1 3/4"

1 3/4"

1 3/4"

8 1/2" 1 3/4"

C-5231 C-5231 C-5231 C-5231 C-5231 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. Twist Twist Twist Twist Twist

3 1/2"

3 1/2"

3 1/2"

3 1/2"

C-4281 3 1/2" Sq. Twist

C-4281 L 3 1/2" Sq. Twist

C-4286 3 1/2" Sq. Twist

C-4286 L 3 1/2" Sq. Twist

ART DECO POST-TO-POST 1 7/8"

2 7/8"

2 3/8"

Enlarged for detail.

C-6810 5"

C-7899 2 Riser No Cap

13" 5" 6 1/2"

C-6810

19" 72" 19" 56"

24 3/4"

26 3/4"

31 3/4" 35"

36"

34"

9 1/4"

29 3/4"

9 1/4"

9 1/4"

25 1/2"

41"

39"

9 1/4"

1 9/16"

1 9/16"

1 9/16"

1 9/16"

3 1/2"

3 1/2"

C-5845 1 9/16" Dia.

C-5845 1 9/16" Dia.

C-5845 1 9/16" Dia.

C-5845 1 9/16" Dia.

C-4840 3 1/2" Sq.

C-4845 3 1/2" Sq.

COFFMAN STAIR PARTS • SINCE 1874

17

LIBERTY OVER-THE-POST 3/8"

2"

2 3/8"

5/8"

1/4"

2 5/32"

2 1/2"

2 1/4" 1/2"

C-6510

C-6510

C-6515 Bending Mould

C-6516 Bending Rail

1" 5" 1"

6"

6" 6"

7 15/16" 31"

6" 6"

5 11/16"

5 11/16"

8 1/2"

8 1/2"

8 1/2"

31"

1 1/4"

1 1/4"

1 1/4"

C-5661 1 1/4" Sq. Flute

C-5661 1 1/4" Sq. Flute

C-5661 1 1/4" Sq. Flute

36" 5 11/16"

8 1/2"

8 1/2"

8 1/2"

3"

3"

C-4565 C-4563 3" Sq. 3" Sq. Flute Flute Newel top diameter is 1-11/16"

6" 2 7/8" 12 15/16" 20 1/2"

41"

39"

5 11/16"

20 1/2"

1 1/4"

2 7/8"

5 11/16"

30 1/2"

13 1/2"

11 1/2"

C-5661 1 1/4" Sq. Flute

12 15/16"

10 15/16" 34"

7 15/16"

44"

5 11/16"

5 11/16"

1 1/4"

12 15/16"

2 7/8"

39" 36"

54"

41"

C-5661 1 1/4" Sq. Flute

2 7/8"

2 7/8"

17 1/2" 12 15/16"

12 15/16"

10 15/16" 34"

5 11/16"

6" 6"

2 7/8" 12 15/16"

2 7/8"

17 1/2"

2 7/8"

2 7/8"

2 7/8"

5"

6"

6"

5 11/16"

5 11/16"

31"

8"

13 1/2"

11 1/2"

25 1/2"

23 1/2"

36"

34"

10 1/2"

8"

10 1/2"

8"

30 1/2"

28 1/2"

41"

39"

10 1/2"

8"

32 1/2"

10 1/2"

8"

10 1/2"

43"

8"

10 1/2"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

C-5610 1 1/4" Sq.

C-5610 1 1/4" Sq.

C-5610 1 1/4" Sq.

C-5610 1 1/4" Sq.

C-5610 1 1/4" Sq.

C-5015 1 1/4" Sq.

C-5015 1 1/4" Sq.

C-5015 1 1/4" Sq.

C-5015 1 1/4" Sq.

C-5015 1 1/4" Sq.

C-5015 1 1/4" Sq.

1"

1"

1" 1"

1"

1"

20 1/2"

5"

1" 1"

1"

1"

1"

27"

5"

50 1/2" 41 1/2"

26" 16"

3"

C-4510 3" Sq.

18

22 1/2"

3"

3"

9" 3"

C-4511 C-4515 C-4516 3" Sq. 3" Sq. 3" Sq. Newel top diameter is 2-1/4"

2 3/4"

17 1/2" 54"

2 3/4"

9"

10 1/2"

9"

9" 2 3/4"

C-4061 C-4063 C-4064 2 3/4" Dia. 2 3/4" Dia. 2 3/4" Dia. Adjustable use with use with Volute Turnout

45 1/2"

44"

44" 32 1/2"

17 1/2"

49"

54"

54"

44"

30"

30"

31 1/2"

6"

30"

30"

20 1/2"

27"

17 1/2"

44"

44" 30 1/2"

13"

20 1/2"

14 1/2"

2 3/4"

2 3/4"

C-4065 2 3/4" Dia. Adjustable

C-4066 2 3/4" Dia. Adjustable

3"

20 1/2"

3"

C-4535 C-4530 3" Sq. 3" Sq. Newel top diameter is 1-11/16"

3"

C-4531 3" Sq. Newel top diameter is 1"

COFFMAN STAIR PARTS • SINCE 1874

LIBERTY POST-TO-POST 2"

2"

2"

1 3/4"

1 1/4" 2 3/8"

2 3/8"

2 3/8"

3/8"

25/64"

1"

3/4" 3/16"

3/16" 2 1/4"

3/8"

25/64" 1 1/4" 2 1/4"

1 3/4 " 2 1/4"

C-6510 P with Fillet

C-6510 P1 with Fillet

C-6510

2 1/2"

3 1/8"

C-6045 Shoe Rail with Fillet

C-6006 Shoe Rail with Fillet

3/8"

25/64"

1 3/4"

1 1/4"

C-6007 Fillet

C-6050 Fillet

C-6510 P1 1 3/4" Plow

C-6510 P 1 1/4" Plow

C-6510

6"

6" 6"

6" 6"

C-7599 2 Riser No Cap

12 15/16"

12 15/16"

2 7/8"

12 15/16"

10 15/16" 34"

31"

2 7/8"

2 7/8"

2 7/8"

7 15/16"

2 7/8"

41"

39" 36"

5 11/16"

5 11/16"

5 11/16"

8 1/2"

8 1/2"

8 1/2"

5 11/16"

5 11/16"

13 1/2"

11 1/2"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

C-5661 1 1/4" Sq. Flute

C-5661 1 1/4" Sq. Flute

C-5661 1 1/4" Sq. Flute

C-5661 1 1/4" Sq. Flute

C-5661 1 1/4" Sq. Flute

4"

4"

4"

13"

13"

17 1/2"

4" 6 1/2"

5 1/8"

5 1/8"

5 3/4"

5 1/8"

5 1/8"

24"

41"

39" 31"

34"

17 1/2" 17 1/2"

5 3/4"

17 1/2" 17 3/4"

6 7/8"

6 7/8" 1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

4"

17 3/4"

1 3/4"

1 1/4"

1 1/4"

C-5105 C-5105 1 1/4" Sq. 1 1/4" Sq.

1 3/4"

20"

4" 23"

3"

3"

3"

C-4550BT C-4555BT C-4556BT C-4557BT 3" Sq. 3" Sq. 3" Sq. 3" Sq.

4"

4"

68"

17 1/2"

6 1/2" 68"

13"

17 1/2" 68"

17 1/2"

54"

17 1/2"

17 1/2"

23"

13"

6 1/2" 17 1/2"

13"

5"

4"

4"

5"

23" 68"

3"

C-5005 1 3/4" Sq.

13"

4"

4"

17 1/2"

54"

17 1/2"

48"

54"

54"

54" 36"

44"

22"

33 1/2"

33 1/2"

27 1/2"

28" 16"

26"

Enlarged for detail.

5"

48"

19 1/2"

4"

4"

5"

1 3/4"

C-5005 C-5005 1 3/4" Sq. 1 3/4" Sq.

13"

23"

33 1/2"

36"

12 3/4"

4"

5"

54"

6 3/4"

C-5067 C-5067 C-5067 C-5067 C-5067 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq.

4"

17 1/2"

48"

30"

12 3/4"

11 7/8"

9 7/8"

6 7/8"

17 1/2"

54"

41"

36"

36"

17 1/2"

17 1/2"

41"

68"

17 1/2"

5 3/4"

24"

24" 22"

5 3/4"

5 3/4"

5 1/8" 19"

6 1/2"

19 1/2"

17"

20"

26"

19 1/2"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

C-4540BT 3" Sq.

C-4542BT 3" Sq.

C-4547BT 3" Sq.

C-4548BT 3" Sq.

C-4541BT 3" Sq.

C-4544BT 3" Sq.

C-4545BT 3" Sq.

C-4546BT 3" Sq.

C-4560BT 3" Sq. Flute

C-4564BT 3" Sq. Flute

C-4566BT 3" Sq. Flute

C-4567BT 3" Sq. Flute

COFFMAN STAIR PARTS • SINCE 1874

19

CRAFTSMAN POST-TO-POST Coffman’s Craftsman series of newels, balusters and handrails offer the contemporary look of modern components. The straight lines and eased edges will please the eye and the touch.

5 1/2"

2 3/4"

5 1/2"

1 5/8"

C-6302 1 5/8"

1 5/8"

C-6300

C-6301

2 3/4"

2 1/4"

2 3/4" 1 5/8"

1 5/8"

1 3/4"

5 3/8" 1/4"

3 5/16"

3/8"

1 3/4"

1 1/4"

C-6700 P with Fillet

C-6700 P1 with Fillet

C-6770 P with Fillet

1 3/4"

1 1/4"

1 3/4" 27/32"

4 3/16"

2 3/32"

C-7318 Rosette

1/4"

1 1/4"

Top View showing Chamfer

3/4"

3/4"

3/4"

15 1/4"

C-6002 Shoe Rail with Fillet

15 1/4"

16"

16" 20"

56" 48"

48"

56"

16 1/2"

56"

16 1/2"

24"

24"

3"

3"

3"

3"

3"

3"

C-4074 3" Sq.

C-4074 EE 3" Sq.

C-4474 C 3" Sq. Chamfer

C-4074 C 3" Sq. Chamfer

C-4474 F 3" Sq. Flute

C-4074 F 3" Sq. Flute

Top View showing Eased Edge

Top View showing Chamfer 3/4"

3/4"

3/4" 3/4"

3/4"

15 1/4"

10 3/4"

15 1/4"

10 3/4"

16"

16"

20" 56"

20"

56" 48"

56"

16 1/2"

24"

48"

56"

16 1/2"

24"

3 1/2"

3 1/2"

3 1/2"

3 1/2"

3 1/2"

3 1/2"

C-4076 3 1/2" Sq.

C-4076 EE 3 1/2" Sq.

C-4476 C 3 1/2" Sq. Chamfer

C-4076 C 3 1/2" Sq. Chamfer

C-4476 F 3 1/2" Sq. Flute

C-4076 F 3 1/2" Sq. Flute

20

C-6001 Shoe Rail with Fillet

10 3/4"

20"

3/4"

2 27/64"

3/4"

10 3/4"

56"

27/32"

2 27/64"

C-6000 P with Fillet 3/4"

3/4"

3/8"

1/4"

3/4"

Top View showing Eased Edge

1/4"

1 1/4"

COFFMAN STAIR PARTS • SINCE 1874

CRAFTSMAN POST-TO-POST

5 3/8"

5 3/8" 5 3/8"

5 3/8" 19 1/8"

24 1/8"

21 1/8"

34"

39"

36"

9 1/2"

26 1/8" 41"

9 1/2"

9 1/2"

41" 36"

34"

9 1/2"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

C-5770 1 1/4" Sq.

C-5770 1 1/4" Sq.

C-5770 1 1/4" Sq.

C-5770 1 1/4" Sq.

C-5060 1 1/4" S4S

C-5060 1 1/4" S4S

C-5060 1 1/4" S4S

Top View showing Eased Edge.

Top View showing Chamfer. 6 1/2"

6 1/2"

6 1/2"

6 1/2" 18 1/2"

36"

18 1/2"

18 1/2"

41"

18 1/2" 41"

36"

41"

36"

16"

16"

11"

11"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

C-5060 EE 1 1/4" Sq.

C-5060 EE 1 1/4" Sq.

C-5060 C 1 1/4" Sq. Chamfer

C-5060 C 1 1/4" Sq. Chamfer

C-5060 F 1 1/4" Sq. Flute

C-5060 F 1 1/4" Sq. Flute

Top View showing Eased Edge.

Top View showing Chamfer. 6 1/2"

6 1/2" 6 1/2"

6 1/2"

18 1/2"

18 1/2" 30"

36"

41"

36"

41"

18 1/2"

18 1/2"

36"

41"

36"

41" 16"

16" 11"

11"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

C-5360 1 3/4" S4S

C-5360 1 3/4" S4S

C-5360 1 3/4" S4S

C-5360 EE 1 3/4" Sq.

C-5360 EE 1 3/4" Sq.

C-5360 C 1 3/4" Sq. Chamfer

C-5360 C 1 3/4" Sq. Chamfer

C-5360 F 1 3/4" Sq. Flute

C-5360 F 1 3/4" Sq. Flute

COFFMAN STAIR PARTS • SINCE 1874

21

HAMPTON POST-TO-POST

2 5/16"

3/8"

1 3/4 " 2 17/32"

C-6005 P1 1 3/4" Plow

C-6005 P1 1 3/4" Plow with Fillet

1 3/4" 3/8" 3/8"

1 3/4"

1"

C-6007 Fillet

3 1/8"

C-6006 Shoe Rail with Fillet

5 3/4"

6"

17 1/2"

31"

41"

30"

17 3/4"

36"

5 11/16"

5 11/16"

8 1/2"

8 1/2"

8 1/2"

6 3/4"

41"

39" 34"

5 11/16"

12 3/4"

12 15/16"

12 15/16" 12 15/16"

10 15/16"

7 15/16"

36"

2 7/8"

2 7/8"

2 7/8"

2 7/8"

2 7/8"

17 1/2" 17 1/2"

6"

6"

5 3/4"

6"

6"

5 3/4"

5 11/16"

36"

30"

5 11/16"

41"

13 1/2"

11 1/2"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

1 3/4"

C-5005 1 3/4" Sq.

C-5005 1 3/4" Sq.

C-5005 1 3/4" Sq.

C-5601 1 3/4" Sq.

C-5601 1 3/4" Sq.

C-5601 1 3/4" Sq.

C-5601 1 3/4" Sq.

C-5601 1 3/4" Sq.

1 3/4"

1 3/4"

1 3/4"

C-5360 C-5360 C-5360 1 3/4" S4S 1 3/4" S4S 1 3/4" S4S

TWO OPTIONS AVAILABLE

Enlarged for detail.

Enlarged for detail.

Enlarged for detail. 4 3/4"

3 1/2"

4" SPECIFY BT 3 1/2" 3 1/2" 3 1/2"

4"

4 3/4"

16" 16"

4"

4 3/4"

9 1/2"

4"

17 1/2" 9 1/2"

68" 17 1/2" 17 1/2"

47 1/2"

17 1/2"

56"

49"

43 "

72"

56"

72"

72" 56"

47 1/2"

25 1/2"

17"

42 3/4"

60"

53"

47"

35"

59 1/2"

67 1/4"

51 1/4"

22 1/2"

3 1/2"

3 1/2"

3 1/2"

3 1/2"

3 1/2"

3 1/2"

3 1/2"

3"

3"

3"

3"

C-4001 3 1/2" Sq.

C-4002 3 1/2" Sq.

C-4003 3 1/2" Sq.

C-4003 L 3 1/2" Sq.

C-4004 3 1/2" Sq.

C-4005 3 1/2" Sq.

C-4006 3 1/2" Sq.

C-4070 3" Sq.

C-4072 3" Sq.

C-4073 3" Sq.

C-4073 L 3" Sq.

22

COFFMAN STAIR PARTS • SINCE 1874

RICHMOND RAIL 2 5/8"

17/32"

2 5/8"

2 3/8" 2 3/8"

2 3/8"

2 1/4"

1/2"

3/8"

11/32"

1 3/4 " 2 1/4"

C-6410

C-6415 Bending Mould

C-6416 Bending Rail

C-6410 P1 with Fillet

1 3/4" 3/8" 1"

3/8"

1 3/4"

3 1/8"

C-6410

C-6006 Shoe Rail with Fillet

C-6410 P1

For a complete line of fittings to be used with Richmond Rail, refer to page 25.

C-6007 Fillet

VIRGINIAN RAIL 5/8" 5/16"

2 5/8"

2 5/8"

2"

2"

1 5/8"

2 1/4"

2"

25/64" 1 1/4" 1 5/8"

C-6610

C-6616 9 Piece Bending Rail

C-6610 P

C-6615 Bending Mould

1 1/4" 25/64" 3/4"

C-6610 P

C-6610

For a complete line of fittings to be used with Virginian Rail, refer to page 25.

25/64"

2 1/2"

1 1/4"

C-6045 Shoe Rail with Fillet

C-6050 Fillet

WALL RAILS 1 3/4"

2 1/4"

1 5/8"

2 1/4" 2 1/4"

1 9/32"

3 1/4" 1"

1 1/8"

C-6040

C-6040

C-7023 Quarterturn

C-7024 Starting Easing

COFFMAN STAIR PARTS • SINCE 1874

C-7000 Acorn

C-7025 Over Easing

1 5/16"

C-6042

C-6042

C-7005 Quarterturn

23

FITTINGS TRADITIONAL/CLASSIC STARTING FITTINGS 4 7/8" Center of Rail to Center of Newel Cap

2 1/4"

The second digit of the fitting part number must match the second digit of the rail part number. Example: C-6010 Rail = C-70XX Fittings C-6210W Rail = C-72XXW Fittings

2 3/8"

1 1/2"

TRADITIONAL C-6010

C-7030 C-7230-W Left Hand Volute

5 1/4" Center of Rail to Center of Newel Cap

C-7033 C-7233-W Left Hand Volute Ascending

C-7035 C-7235-W Right Hand Volute

2 7/8" Center of Rail to Center of Newel Cap

4 7/8" Center of Rail to Center of Newel Cap

2 5/8"

C-7038 C-7238-W Right Hand Volute Ascending

2 3/8"

2"

CLASSIC C-6210-W

C-7010 C-7210-W Starting Easing With Cap

C-7031 Vertical Volute

C-7040 C-7240-W Left Hand Turnout

C-7045 C-7245-W Right Hand Turnout

C-7041 C-7241-W Left Hand Turnout

C-7046 C-7246-W Right Hand Turnout

TRANSITION FITTINGS

C-7001 Rail Drop

C-7007 C-7207-W Coped End

C-7016 C-7216-W Over Easing Returned End

C-7018 C-7218-W Newel Cap

C-7009 C-7209-W Returned End

C-7019 C-7219-W Opening Cap

C-7011 C-7211-W Level Quarterturn 90°

C-7012S C-7212S-W Up Easing

C-7020 C-7220-W Tandem Cap

C-7021 C-7221-W Quarterturn Cap 90°

C-7013 C-7213-W Over Easing

7014S 7214S-W Up Easing 90°

C-7022 C-7222-W Level Cap 45°

C-7015 C-7215-W Starting Easing Returned End

C-7047 C-7247-W 5" Center to Center Left or Right (LH shown)

GOOSENECK FITTINGS

C-7050 C-7055 C-7250-W C-7255-W Left Hand Right Hand 2 Riser No Cap 90°

C-7060 C-7065 C-7260-W C-7265-W Left Hand Right Hand 2 Riser With Cap 90°

C-7061 C-7066 C-7261-W C-7266-W Left Hand Right Hand 2 Riser With Cap 45°

C-7070 C-7075 C-7270-W C-7275-W Left Right Hand Hand 1 Riser No Cap 90°

C-7071 C-7076 C-7271-W C-7276-W Left Right Hand Hand 2 Riser No Cap 90°

C-7080 C-7085 C-7280-W C-7285-W Left Right Hand Hand 1 Riser With Cap 90°

5 1/2" Center of Rail to Center of Rail 5 1/2" Center of Rail to Center of Rail

C-7081 C-7086 C-7281-W C-7286-W Left Right Hand Hand 2 Riser With Cap 90°

24

C-7082 C-7087 C-7282-W C-7287-W Left Right Hand Hand 2 Riser With Cap 45°

C-7090 C-7095 C-7290-W C-7295-W Left Right Hand Hand 1 Riser Landing Return No Cap 180°

C-7091 C-7094 C-7291-W C-7294-W Left Right Hand Hand 2 Riser Landing Return No Cap 180°

C-7088 C-7288-W 1 Riser With Tandem Cap

C-7089 C-7289-W 2 Riser With Tandem Cap

C-7096 C-7296-W 1 Riser With Cap

C-7097 C-7297-W 2 Riser With Cap

C-7098 C-7298-W 1 Riser No Cap

C-7099 C-7299-W 2 Riser No Cap

COFFMAN STAIR PARTS • SINCE 1874

FITTINGS BRISTOL/RICHMOND/LIBERTY/MARION STARTING FITTINGS 5" Center of Rail to Center of Newel Cap

2 3/4 " 2"

2 5/8"

2 3/4"

2 1/4 "

BRISTOL C-6110

2 3/8"

2 5/8"

2"

2 3/8"

2 1/4"

2 1/4"

1 5/8"

RICHMOND C-6410

LIBERTY C-6510

66 VIRGINIAN C-6610

The second digit of the fitting part number must match the second digit of rail part number. Example: C-6110 Rail = C-71XX Fittings C-6410 Rail = C-74XX Fittings C-6510 Rail = C-75XX Fittings C-6610 Rail = C-76XX Fittings C-6719 Rail = C-77XX Fittings

C-7110 C-7410 C-7510 C-7610 C-7710 Starting Easing with Newel Cap

C-7130 C-7430 C-7530 C-7630 C-7730 Left Hand Volute

C-7135 C-7435 C-7535 C-7635 C-7735 Right Hand Volute

2 5/8"

4 7/8" Center of Rail to Center of Newel Cap

5 1/2" Center of Rail to Center of Newel Cap

3"

2 5/8"

MARION C-6719

C-7140 C-7440 C-7145 C-7445 C-7540 C-7640 C-7545 C-7645 C-7740 C-7745 Left Hand Right Hand Turnout Turnout

C-7133 C-7633 C-7138 C-7638 Left Hand Volute Right Hand Volute Ascending Ascending Recommended Starting Step — C-8030/C-8050

TRANSITION FITTINGS

C-7609 Returned End

C-7111 C-7411 C-7511 C-7611 C-7711 Level Quarterturn 90°

C-7112S C-7412S C-7512S C-7612S C-7712S Up Easing

C-7113 C-7413 C-7513 C-7613 C-7713 Over Easing

C-7114S C-7414S C-7514S C-7614S C-7714S Up Easing 90˚

C-7119 C-7419 C-7519 C-7619 C-7719 Opening Cap

C-7120 C-7420 C-7520 C-7620 C-7720 Tandem Cap

C-7121 C-7421 C-7521 C-7621 C-7721 Quarterturn Cap 90°

C-7122 C-7422 C-7522 C-7622 C-7722 Level Cap 45°

C-7147 C-7447 C-7547 C-7747 5" Center to Center Left or Right (LH shown)

GOOSENECK FITTINGS

C-7181 C-7481 C-7186 C-7486 C-7161 C-7461 C-7166 C-7466 C-7150 C-7450 C-7155 C-7455 C-7197 C-7497 C-7581 C-7681 C-7586 C-7686 C-7561 C-7761 C-7566 C-7766 C-7550 C-7750 C-7555 C-7755 C-7597 C-7797 C-7781 C-7786 Left Hand Right Hand Left Hand Right Hand 2 Riser Left Hand Right Hand 2 Riser With Cap 45° 2 Riser No Cap 90° With Cap C-7160 C-7460 C-7165 C-7465 C-7189 C-7489 C-7199 C-7499 C-7171 C-7471 C-7176 C-7476 2 Riser With Cap 90° C-7560 C-7760 C-7565 C-7765 C-7589 C-7689 C-7599 C-7699 C-7571 C-7671 C-7576 C-7676 Left Hand Right Hand C-7789 C-7799 C-7771 C-7776 2 Riser With 2 Riser 2 Riser With Cap 90° Left Hand Right Hand Tandem Cap No Cap 2 Riser No Cap 90°

ART DECO 4 7/8" Center of Rail to Center of Newel Cap

1 7/8"

2 7/8"

C-7811 Level Quarterturn 90°

C-7840 Left Hand Turnout

C-7812S Up Easing

2 3/8"

ART DECO C-6810

C-7810 Starting Easing

C-7819 Opening Cap

COFFMAN STAIR PARTS • SINCE 1874

C-7831 Vertical Volute

C-7845 Right Hand Turnout

C-7850 C-7855 Left Hand Right Hand 2 Riser No Cap 90°

C-7871 C-7876 Left Hand Right Hand 2 Riser No Cap 90°

C-7899 2 Riser No Cap

NOTE: Placement of Art Deco newels on intermediate landings and balconies will sometimes differ from standard newel locations, because of the contemporary styling of the Art Deco fittings.

25

HARDWOOD STARTING STEPS Check local building code requirements before specifying any starting step. Starting steps are shipped complete with the starting riser, starting tread, and all cove and shoe moulding. Starting risers are available in a selection of hardwood species or paintgrade poplar. Separate Cove Moulding Sets and Shoe Moulding Sets are available in all starting step profiles. Example: C-8010 Cove and C-8010 Shoe. NOTE: Please specify right or left hand when ordering single end starting steps. Reversible starting steps are available as an option. When measuring for finished stair width on double end starting steps, include all finish materials. Example: Sheetrock, skirtboard, decorative tread brackets, etc.

1 1/4"

48"

1 1/32"

10 3/8"

6 1/4"

Specify finished stair width

10 1/4"

Usable with all turnouts and volutes. C-8025

C-8015

Order Item

1 1/4" 10 3/8"

C-8016-48 C-8016-53 C-8016-58

For finished stair width of 43" to 48" 48" to 53" 53" to 58"

Usable with all turnouts and volutes. Three adjustable sizes allow job site trimming for exact finished fit.

10 3/8"

6 1/4"

6 1/4"

Order Item

10 3/8"

48"

11 1/4" 1 1/32"

7"

48"

C-8060

1 1/32" 7"

48" 11"

8 7/8"

8 7/8"

C-8050

26

1 1/32"

Use with C-7133/C-7138 Ascending Volutes, and usable with larger profile volutes, ascending volutes, PTP systems and box newels.

Specify finished stair width

12"

5 1/4"

8 7/8"

8 7/8"

C-8650

12"

C-8630 Half Circle

C-8630 12"

48"

7"

8 7/8"

12 1/2"

11"

6 1/2"

12 1/4"

12" 5 1/4"

C-8030 Specify finished stair width

7"

48"

C-8030 Half Circle

11"

Usable in stair designs that require a flush mounted step with starting fittings.

C-8061

8 7/8"

11 1/4"

7"

7"

11 1/4"

11"

48" 6 1/2"

7"

C-8041 Quarter Circle

Specify finished stair width

7"

48"

7"

C-8041

Usable in stair designs that require a flush mounted starting step.

7"

14"

7"

14"

C-8040 Quarter Circle 7"

7" 1 1/32"

7"

C-8040

7"

Usable with all turnouts and volutes. Three adjustable sizes allow job site trimming for exact finished fit.

10 3/8"

48" 7"

7"

C-8065-48 C-8065-53 C-8065-58

C-8065 Adjustable Bowed Starting Step

7"

Specify finished stair width

For finished stair width of 43" to 48" 48" to 53" 53" to 58"

16 1/2"

C-8016 Adjustable Double End Bullnose

11 1/4"

10 1/4"

Usable with all turnouts and volutes.

6 1/4"

10 1/4"

C-8020 Scroll End

C-8020

10 3/8"

48"

7"

C-8010 Bullnose

Specify finished stair width

1 1/32"

11 1/4"

C-8010 1 1/4" 10 3/8"

11 1/4"

10 1/4"

10 3/8"

6 1/4"

11 1/4"

48"

48"

7"

Usable with larger profile volutes and ascending volutes, PTP systems and box newels.

COFFMAN STAIR PARTS • SINCE 1874

HARDWOOD TREADS AND RISERS The products in this section are manufactured under highly controlled standards for beauty that will last a lifetime. All are manufactured without the use of finger-joints, excluding landing tread, which is offered both solid and finger-jointed. Treads and risers are available in standard lengths of 36", 42", 48", 54", 60" and 72".

C-8070 Tread No Return 3/4" and 1-1/32" x 10-1/2" and 11-1/2"

C-8070 MR Coped Return Tread 3/4" and 1-1/32" x 10-1/2" and 11-1/2"

3/4"

7 1/2 - 8"

C-8470 Platform 1-1/32" x 36", 42" and 48"

C-8370 Three Piece Winder Tread 1-1/32" x 36", 42" and 48" (RH shown)

C-8270 Two Piece Winder Tread 1-1/32" x 36", 42" and 48" (RH shown)

C-8075 Riser 3/4" x 7-1/2" and 8"

3 1/2" 1/4"

1 1/32" 1 1/4"

C-8090 Landing Tread 3-1/2" Wide

LINEAL SKIRTBOARD S4S edge-glued and finger-jointed. C-6974 – 3/4" x 9-1/4" C-6975 – 3/4" x 11-1/4"

19/64" 1/4" 3/4" 13/64" 2 1/4"

C-8090 - 3-1/2" Wide C-8590 - 5-1/4" Wide

C-8590 Landing Tread 5-1/4 " Wide

11 3/4" or 12 3/4"

13"

1 27/32"

1 1/32"

1 1/32"

5/8"

1 1/32" and 3/4"

3/4"

C-8085 Shoe Mould 1/2" x 3/4"

1/2"

C-8080-13 13" Return Nosing 1-1/4" x 1-1/32"

C-8095 13/16" Cove Mould 13/16" x 5/8"

1 1/4"

C-8080 C-8080-12 MR 1 1/4" Nosing 1 1/4" C-8080-13 MR 1-1/4" x 1-1/32" and 3/4" Coped Return Nosing Lineal Stock 1-1/4" x 1-1/32" x 11-3/4" and 12-3/4"

1 1/4"

C-8081 Nosing and Cove 1-1/4" x 1-27/32" Lineal Stock

TREAD AND RISER CAPS 6"

1 1/32"

11 1/4"

6"

1/2"

4 3/4"

1 1/32" 10 3/8"

11 1/4"

1/2"

4 3/4" 10 3/8"

8"

8" 7"

7"

C-8911 Reversible Starting End Cap

7 1/4" 6"

C-8011 Starting End Cap Left or Right (RH shown)

C-8976 6" x 8" Riser Cap

6" 4 3/4"

6" 13 1/2"

C-8971 6" x 11" Reversible Tread Cap with Mitered Return Nosing and Cove

1/2"

12 1/4"

C-8972 6" x 11" Tread Cap with Nosing and Cove

COFFMAN STAIR PARTS • SINCE 1874

C-8076 4-3/4" x 8" Riser Cap

1/2"

4 3/4" 16"

C-8071 4-3/4" x 11-1/2" Tread Cap with Mitered Return Nosing and Cove Left or Right (RH shown)

1/2"

12 3/4"

C-8072 4-3/4" x 11-1/2" Tread Cap with Nosing and Cove

27

BOX NEWELS 2 1/16"

2 1/16" 5 1/4" 2 1/16"

5 1/4"

2 1/16"

2 13/16 "

2 13/16 "

6 1/4"

6 1/4" 3"

3"

20 3/8" 20 3/8"

20 3/8"

20 3/8" 2 5/8 "

2 5/8 "

Coffman Box Newels offer the flexibility to be combined with any of Coffman’s standard rail and baluster profiles. The C-4096 is shown above with Coffman’s Bristol family: C-6110 Rail, C-7111 Level Quarterturn Fitting, C-7112S Upeasing, and C-5151F Fluted Baluster.

To aid in secure installations, Coffman box newels are shipped with a removable, solid-wood Box Newel Installation Block.

63 7/8"

56" 2 3/8"

63 7/8"

56" 2 3/8"

21 15/16"

4 1/2" C-4691 Recessed Panel 4 1/2" Sq.

7 1/2" C-4891 Recessed Panel 6" Top Sq. 7 1/2" Bottom Sq.

30 3/4"

21 15/16"

30 3/4"

4 1/2" C-4692 True Raised Panel 4 1/2" Sq.

7 1/2" C-4892 True Raised Panel 6" Top Sq. 7 1/2" Bottom Sq.

2 3/16"

2 1/16"

2 3/16"

2 1/16"

6 1/4"

6 1/4"

3"

3"

5 1/4" 2 13/16 "

20 3/8" 61 11/16"

20 3/8"

20 3/8" 2 5/8 "

56"

63 7/8"

56"

63 7/8"

3 1/2" 2 3/8"

2 3/8 "

23"

5" C-4099 Newel Sleeve - 3-1/2" (Moulding Included Loose)

28

21 13/16"

7 1/2" C-4890 Mission 6" Top Sq. 7 1/2" Bottom Sq.

21 15/16"

4 1/2" C-4690 Mission 4 1/2" Sq.

7 1/2" C-4097 Raised Panel 6" Top Sq. 7 1/2" Bottom Sq.

30 3/4"

4 1/2" C-4697 Raised Panel 4 1/2" Sq.

COFFMAN STAIR PARTS • SINCE 1874

BOX NEWELS 3 5/8"

2 1/16" 5 1/4"

2 1/16"

2 13/16"

6 1/4"

3 5/8"

3 5/8"

5"

5"

23 1/8"

23 1/8"

3"

20 3/8" 20 3/8" 2 5/8 "

65"

55"

63 7/8"

56"

61 3/8"

55"

2 3/8"

23 1/4"

30 3/4"

21 15/16"

6 1/4" C-4091 Plain 4 3/4" Top Sq. 6 1/4" Bottom Sq.

4 1/2" C-4696 Flute 4 1/2" Sq.

7 1/2" C-4096 Flute 6" Top Sq. 7 1/2" Bottom Sq.

23 1/4"

3 1/2" C-4075 Landing 3 1/2" Sq.

6 1/4" C-4092 Flute 4 3/4" Top Sq. 6 1/4" Bottom Sq. 2 1/16"

2 1/16" 5 1/4"

2 1/16"

2 1/16"

6 1/4"

5 1/4" 25 13/16" 23 7/16"

25 3/4"

61 3/4" 53 3/4"

56"

63 7/8" 63 7/8"

21 15/16"

7 1/2" C-4095 Plain 6" Top Sq. 7 1/2" Bottom Sq.

23"

6 1/4" C-4090 Plain 4 3/4" Top Sq. 6 1/4" Bottom Sq.

COFFMAN STAIR PARTS • SINCE 1874

30 3/4"

4 1/2" C-4695 Plain 4 1/2" Sq.

3 1/2" C-4077 Landing 3 1/2" Sq.

29

C-2852 — 3/4" Hollow Core LITE-IRON™ Baluster

FORGED LITE-IRON

Forged Finishes (F) POWDER COAT (M) MATTE BLACK (A) ANTIQUE BRONZE (S) SATIN BLACK, (C) OIL RUBBED COPPER (N) ANTIQUE NICKEL For viewing the finishes in color and for product detail, refer to Coffman’s Forged Iron Brochure C-254.

We have lightened the load by making it hollow. Check our our LITE-IRON™ series, the newest addition to the Forged Iron Collection. The LITE-IRON™ hollow core reduces weight while maintaining strength and is available in our BOLD 3/4".

Spectacular Results... Faster Installations! Structural tests to ICC standards, performed by an independent university testing facility, proving the integrity of our new LITE-IRON™ series are available upon request.

2 3/4"

C-2390

C-2392

3/4" Rake Collar with Set Screw

3/4" Base Collar with Set Screw

F, M, A, S, C

F, M, A, S, C

5 1/2"

2 3/4" 5 3/4"

18" 18"

6"

18"

18"

18"

3 7/8" 4 3/4"

3"

3 1/4"

3 7/8" 8"

3 7/8" 6"

4 3/4" 6"

LIGHTER-BOLDER 23"

16 3/4"

17 3/8"

13 3/4"

44"

18"

44"

44"

44"

44"

3/4"

C-2850 F, M, A, S, C

30

3/4"

C-2851

F, M, A, S, C

3/4"

C-2852

F, M, A, S, C

44"

3/4"

C-2853 F, M, A, S, C

3/4"

C-2855

F, M, A, S, C

3/4"

C-2885 F, M, A, S, C

COFFMAN STAIR PARTS • SINCE 1874

FORGED COLLECTION Collar Options 1/2"

C-2302

C-2301 C-2340 Base Collar Inside Opening 1/2" F, M, A, S, C, N

C-2342 Base Collar with Set Screw Inside Opening 1/2"

C-2345 Adjustable Collar with Set Screw Inside Opening 1/2"

C-2350 Rake Collar 38° with Set Screw Inside Opening 1/2"

F, M, A, S, C, N

F, M, A, S, C, N

F, M, A, S, C, N

C-2351 Rake Collar 38° with Set Screw Inside Opening 5/8"

F, M, A, S, C, N

F, M, A, S, C, N

4"

F, M, A, S, C, N

C-2303

FORGED TOUCH-UP KIT Available in six speciality finishes. Powder Coat (F), Antique Bronze (A), Oil Rubbed Copper (C), and Antique Nickel (N) consist of two touch-up paint markers. Matte Black (M) and Satin Black (S) contain a single paint marker.

Collar Options 5/8"

C-2341 Base Collar Inside Opening 5/8"

C-2360 NEWEL ATTACHING SYSTEM Base Collar, Shaft and Screws

C-2308 FORGED TOUCH-UP KIT

13/16"

2 1/2"

C-3601 Heavy Duty Wall Rail Bracket

EPOXY GLUE SYSTEM C-2302 Manual Dispenser C-2301 Adhesive (Approximately 20 balusters per tube. Open work time – 25 minutes.) C-2303 Mixing Nozzle (Packed 10 ea.)

F, M, A, S, C, N

Baluster top pins have 1/2" diameters. (Exception: Medallion and Belly Balusters)

F, M, A, S, C, N 2 1/4"

5 1/2"

7"

2 1/4"

5 1/4" 5 3/4"

18 1/4" 18 1/4"

3 3/4"

7" 18"

6"

18"

18"

2 1/2"

18"

18"

18"

3 7/8"

6 1/2" 5 3/4"

4 3/4"

2 1/2"

3 1/4"

3"

3 7/8" 8"

3 7/8"

7"

6"

4 3/4"

12"

6" 24 1/4"

17 1/4"

16 3/4"

23" 48"

1 3/16"

1/2"

1/2"

C-2452 Newel

F, M, A, S, C, N

44"

44"

1 3/16"

1/2"

1/2"

1/2"

1/2"

1/2"

C-2555

C-2580

C-2585

F, M, A, S, C, N

F, M, A, S, C, N

F, M, A, S, C, N

C-2550

C-2551

C-2552

C-2553

F, M, A, S, C, N

F, M, A, S, C, N

F, M, A, S, C, N

F, M, A, S, C, N

Check local building codes. 6"

6"

1 11/16"

2 3/4"

1 11/16"

7 5/8"

8 7/8"

18"

18"

*All balusters

9 7/8"

18" 18"

with spoon designs are shown in Front View drawings. Side profile will be similar to drawing below.

18"

4" 5 1/2"

6"

1 5/8"

4" 3 5/8"

5"

4 1/4"

12 3/4" 6 1/2"

6"

1 5/8"

6"

5 1/2"

5 1/2" 4"

21"

6" 20"

16 7/8" 44"

44"

44"

F, M, A, S, C, N

18"

18"

14" 44"

48"

C-2450 Newel

17 3/8"

13 3/4" 44"

44"

16 7/8"

44"

15 5/8"

44"

44"

44"

44"

44"

44"

17 7/8"

13 1/2"

Front View 1/2"

1/2"

1/2"

1/2"

5/8"

C-2560

C-2561

C-2562

C-2563

C-2570

F, M, A, S, C, N

F, M, A, S, C, N

F, M, A, S, C, N

F, M, A, S, C, N

Front View*

COFFMAN STAIR PARTS • SINCE 1874

F, M, A, S, C, N

5/8"

5/8"

C-2571

C-2572

C-2575

Front View*

Front View*

F, M, A, S, C, N

5/8"

F, M, A, S, C, N

F, M, A, S, C, N

Side View

31

FORGED COLLECTION Collar Options 1/2"

Collar Options 5/8"

C-2910

C-2911

C-2912

C-2914

F, M, A, S, C, N

F, M, A, S

F, M

F, M, A, S, C, N

C-2915 with Set Screw F, M, A, S, C, N

Forged Finishes

Collar Options

Collar Options 9/16"

(F) POWDER COAT (M) MATTE BLACK (A) ANTIQUE BRONZE (S) SATIN BLACK, (C) OIL RUBBED COPPER (N) ANTIQUE NICKEL

Fits both 1/2" and 5/8" Forged Balusters. The plastic insert holds collar out of the way during epoxy installation and the base makes for perfect alignment.

For viewing the finishes in color and for product detail, refer to Coffman’s Forged Iron Brochure C-254.

C-2916 M

C-2917 with Set Screw

C-2918 with Set Screw

M

M

Job-Lot Epoxy Adhesive System

C-2919

C-2929

F, M, A, S, C, N

F, M, A, S, C, N

3" 2 1/4"

C-2905 Adhesive Kit 5 oz. Adhesive Cartridge and Nozzle to be used in standard caulking gun. (Approximately 50 balusters per tube. Open work time – 6 minutes.)

18 1/4"

2 1/4" 6"

18 1/4"

5 1/2"

18"

C-2906 Extra Nozzle for C-2905

18"

4 1/8" 6"

6 3/4"

4 3/4" 3 7/8" 4 3/4"

Medallions for use in Medallion Balusters 23 1/4"

24" 23 5/8" 48"

17 3/8"

48"

44" 44"

C-2920

C-2921

C-2922

M

M

M

C-2923 M

or C-2924 Brass Finish The 4" Medallions above fit into the rings of the Medallion Balusters shown on page 33.

6"

1 3/16"

1/2"

1/2"

C-2942 Newel

C-2962

C-2963

Front View*

F, M, A, S, C, N

F, M, A, S

2 1/4" 5 1/2"

1 3/16"

C-2940 Newel

F, M, A, S, C, N

5 7/8"

5 7/8"

5 7/8"

4 7/8"

F, M, A, S, C, N

*All balusters

18"

18"

6 1/2"

18"

7"

6"

18"

7"

3 1/2"

3 3/4"

4"

4 3/4"

9"

9"

11 1/2"

11 1/2"

9"

3 1/2" 25 1/2"

7"

7"

44"

44"

19 1/2"

44"

11 5/8"

11" 40"

13 1/2"

13"

2 3/8"

3"

23 5/8" 44"

40"

40"

44" 5 1/2"

5 1/2"

5 1/2"

5/8"

5/8"

5/8"

5/8"

5/8"

1/2"

1/2"

1/2"

C-2995

C-2996

C-2997

C-2998

C-2999

C-2986

C-2987

C-2988

F, M, A, S, C, N

Front View*

Front View*

Front View*

Front View*

32

F, M, A, S, C, N

F, M, A, S, C, N

with spoon designs are shown in Front View drawings. Side profile will be similar to drawing below.

F, M, A, S, C, N

F, M, A, S, C, N

Front View

Side View

F, M, A, S, C F, M, A, S, C F, M, A, S, C Belly Balusters have 1/2" Square Tops. C-2987 and C-2988 will match the C-2550 through C-2553 series. COFFMAN STAIR PARTS • SINCE 1874

FORGED COLLECTION Medallions for Balusters below are shown on Page 32. Tops are 1/2" Square. 6"

4"

4"

2 1/4"

2 1/4"

2 1/4"

2 3/4"

2 1/4"

6" 6"

5 3/4"

9 7/8" 5"

18"

18"

6"

18"

18"

5 1/2"

18"

18"

18"

18" 6"

4 1/8"

3 7/8" 13"

7"

4 1/4"

3 7/8"

3 7/8"

4 3/4"

4 3/4"

3 7/8"

6 1/4" 4"

17 3/8"

13 3/4"

17 3/4"

22"

17 3/8"

23 5/8"

44"

44"

M

C-2933

C-2932

C-2931

C-2930

Installation hardware included M

M

1/2"

1/2"

1/2"

1/2"

5/8"

C-2952 Brass Basket

C-2953 Brass Baskets

C-2954 Brass Basket

C-2955 Brass Baskets

C-2957 Brass Basket

M

M

M

M

Front View*

1/2"

1/2"

1/2"

M

M

7"

7"

*All balusters

4 3/4" 18"

18"

18"

18"

7"

18"

with spoon designs are shown in Front View drawings. Side profile will be similar to drawing below.

18"

3 1/4" 15"

6" 6"

44" 17 7/8"

44"

44"

44"

40"

44"

44"

1/2"

6"

6"

15"

24"

4 3/4"

4 3/4"

2"

2"

6 1/2"

6 1/2"

6 1/4"

6" 3 1/4" 7"

6 3/4"

44"

44"

44"

20"

9/16" Round

9/16" Round

C-2970 M

44"

12 3/4"

44"

44"

19 1/2"

9/16" Round

7"

7"

9/16" Round

44"

12 3/4"

13"

9/16" Round

9/16" Round

C-2971

C-2972

C-2973

C-2974

C-2975

C-2976

Front View*

Front View*

Front View*

Front View*

Front View*

7"

M

7"

5"

18"

M

M

M

1 1/2"

5"

18"

18"

M

1 1/2"

7"

18"

18"

18"

18"

15"

1" 7 1/2" 12"

12"

12"

Side View

Check local building codes when using 7" balusters.

9/16" Round

Front View*

M

Front View

12 3/4"

8"

12" 2"

6" 14"

14"

14"

25"

14"

16 1/2" 44"

44"

5/8"

44"

44"

44"

44"

5/8"

1/2"

5/8"

5/8"

C-2981

C-2982

C-2983

C-2984

C-2990

C-2991

M

M, A, S, C, N

M

M

F, M, A, S, C, N

F, M, A, S, C, N

COFFMAN STAIR PARTS • SINCE 1874

5/8"

44"

12"

44"

1/2"

1/2"

C-2960

C-2968

M, S

F, M, A, S, C, N

33

THE ADJUSTABLE STAIR RAIL SYSTEM THAT WE HAVE PUT TOGETHER... SO YOU DON’T HAVE TO. Exclusively from Coffman, preassembled and adjustable balustrade systems available with either Pin Top balusters (Traditional) or Square Top balusters (Mt. Vernon and Franciscan). • Assembled Handrail, Balusters, and Base. • Both stair units and balcony units designed to meet 4" sphere codes.

Wonderail is patented with new patents pending.

TRADITIONAL AVAILABLE UNFINISHED AND PREFINISHED • Available unfinished in Red Oak w/ Oak or Primed Balusters. • Also available PREFINISHED (Red Oak w/ Oak or White Balusters) in a beautiful natural finish and three Minwax® colors: Golden Oak, Early American and Provincial. • Fillet pieces are cut at one end and ready for the final angle cut. • Stair units are adjustable from a slope of 32° – 45°. Balcony units are fixed.

4"

2 1/4" 13" 2 3/8"

4"

4"

4"

5"

5"

5"

1 1/2"

23" 23"

C-6010

23"

68"

23" 25 1/2"

48"

54"

54"

36"

28" 16"

8"

Available with a shoe rail base for use on both open and closed stairs.

C-1034 Shoe Base

Available in a 7-1/4" wide cap board base for use on closed stairs. C-1044 Cap Base

STAIR UNIT, HEIGHT 34" ITEM NO.

SPECIFY BALUSTER

LENGTH

C-1034 C-1034 C-1034 C-1034 C-1034 C-1034 C-1034

OAK or PRIMED OAK or PRIMED OAK or PRIMED OAK or PRIMED OAK or PRIMED OAK or PRIMED OAK or PRIMED

4' 6' 8' 10' 12' 14' 16'

C-1044 OAK or PRIMED 4' C-1044 OAK or PRIMED 6' C-1044 OAK or PRIMED 8' C-1044 OAK or PRIMED 10' C-1044 OAK or PRIMED 12' C-1044 OAK or PRIMED 14' C-1044 OAK or PRIMED 16' NOTE: 34" units for rake applications only.

34

22"

22"

10 1/2"

1 1/4"

3"

3"

C-5015 1 1/4" Sq.

C-4540BT 3" Sq.

C-4542BT 3" Sq.

3"

BALCONY UNIT, HEIGHT 38" ITEM NO.

SPECIFY BALUSTER

3"

C-4547BT C-4542BT PREP 3" Sq. 3" Sq.

LENGTH

*

newel *isPrepped half-notched, predrilled, and shipped complete with lag bolts, washers, and 1" plugs. (For use with C-1044 Cap Base ONLY)

C-1038 OAK or PRIMED 4' C-1038 OAK or PRIMED 6' C-1038 OAK or PRIMED 8' NOTE: 38" units for balcony applications only. Balcony units are manufactured with shoe base only.

NEWEL POSTS AND ACCESSORIES ITEM NO.

C-4540BT C-4542BT C-4542BT-PREP C-4547BT C-4542BT-1/2 C-3505-30 C-3000 C-3010 C-3015 C-3020 C-7337

SPECIE

OAK OAK OAK OAK OAK OAK OAK OAK OAK OAK OAK

DESCRIPTION

Starting Newel Starting Newel Prepped Starting Newel Landing Newel Half Newel L-Bracket Post Fastener Flush Mount Plug 1" Flush Mount Plug 1/2" Button Plug 1/2" Button Plug 1" Rosette

COFFMAN STAIR PARTS • SINCE 1874

MT. VERNON • Available unfinished in Red Oak only. • Fillet included, uncut, and loose. • Adjustable from a slope of 32° – 41°.

2 5/8"

3"

STAIR UNIT, HEIGHT 34" ITEM NO.

SPECIE

5 3/4"

3/16"

LENGTH

1 3/4 " 2 5/8"

17 1/2" C-1234 OAK 3' 36" C-1234 OAK 4' C-1234 OAK 6' 12 3/4" C-1234 OAK 8' C-1234 OAK 10' 1 3/4" C-1234 OAK 12' C-5005 C-1234 OAK 14' 1 3/4" Sq. NOTE: 34" units for rake applications only.

C-6719 P1

4 13/16" 13" 7 3/16" 2 7/8"

2 7/8"

10 15/16"

10 15/16" 59 1/2"

56" 5 11/16"

5 11/16"

BALCONY UNIT, HEIGHT 38" ITEM NO

SPECIE

LENGTH

C-1238 OAK 4' C-1238 OAK 6' C-1238 OAK 8' NOTE: 38" units for balcony applications only.

NEWEL POSTS AND ACCESSORIES

4 13/16"

24 1/2"

22 3/16"

3 1/2"

3 1/2"

C-4242 3 1/2" Sq.

C-4245 3 1/2" Sq.

ITEM NO.

DESCRIPTION

C-4242 OAK C-4245 OAK C-4242-1/2 OAK C-3505-35 OAK C-3000 OAK C-3010 OAK C-3015 OAK C-3020 OAK C-7337 OAK

Starting Newel Landing Newel Half Newel L-Bracket Post Fastener Flush Mount Plug 1" Flush Mount Plug 1/2" Button Plug 1/2" Button Plug 1" Rosette

FRANCISCAN • Available unfinished in Red Oak or Beech. • Fillet Included, Uncut and Loose. • Adjustable from a slope of 32° – 41°.

2 17/32"

2 5/16"

STAIR UNIT, HEIGHT 34" ITEM NO.

SPECIFY

LENGTH

5 3/4" 1 1/4"

C-6005

17 1/2"

C-1134 OAK or BEECH 3' 3 C-1134 OAK or BEECH 4' 12 3/4" C-1134 OAK or BEECH 6' C-1134 OAK or BEECH 8' 1 1/4" C-1134 OAK or BEECH 10' C-5105 C-1134 OAK or BEECH 12' 1 1/4" Sq. C-1134 OAK or BEECH 14' NOTE: 34" units for rake applications only.

3 1/2" 3 1/2" 16" 9 1/2"

SPECIFY

COFFMAN STAIR PARTS • SINCE 1874

17 1/2"

59 1/2"

56"

LENGTH

C-1138 OAK or BEECH 4' C-1138 OAK or BEECH 6' C-1138 OAK or BEECH 8' NOTE: 38" units for balcony applications only.

ITEM NO.

17 1/2"

BALCONY UNIT, HEIGHT 38" ITEM NO.

NEWEL POSTS AND ACCESSORIES

22 1/2"

25 1/2"

3 1/2"

3 1/2"

C-4002 3 1/2" Sq.

C-4003 3 1/2" Sq.

C-4002 C-4003 C-4002-1/2 C-3505-35 C-3000 C-3010 C-3015 C-3020 C-7317

SPECIFY

OAK or BEECH OAK or BEECH OAK or BEECH OAK or BEECH OAK OAK OAK OAK OAK or BEECH

DESCRIPTION

Starting Newel Landing Newel Half Newel L-Bracket Post Fastener Flush Mount Plug 1" Flush Mount Plug 1/2" Button Plug 1/2" Button Plug 1" Rosette

35

ACCESSORIES

C-3010 Flush Rail Plug 1/2" Diameter

C-3000 C-3015 Flush Rail Plug Button Plug 1" Diameter 1/2" Diameter

1/4"

3/8"

C-3001 3-1/2" Rail Bolt

C-3020 Button Plug 1" Diameter

2"

1 3/4"

1 1/4" 3/8"

1/4"

1/4"

5/8"

5/8"

5/8"

C-3005 C-3004 C-3003 1-1/4" Clamp Nail 1-3/4" Clamp Nail 2" Clamp Nail

3/8"

10 3/4"

5"

1" 5 1/2"

4 1/2"

3/4"

3/8"

1/2"

C-3284 Thread Lock

C-3201 Baluster Fastener Drill Driver Kit Includes — 4 Baluster Fasteners

Hardwood Hemlock C-3505-30 — 3" C-3505-325-H — 3-1/4" C-3505-35 — 3-1/2" C-3505-4375-H — 4-3/8" L-Bracket Post Fastener

C-3009 C-3008 Newel Anchoring Sure Tite Hardware Newel Fastening System Includes - Lag Bolt, Washer, Nut and 1-1/2" Plugs

C-3203 — 50 Pack C-3203-B — 100 Bulk Pack 2-1/2" Baluster Fasteners

C-3101 Zipbolt UT Rail Bolt C-3102 Zipbolt Angled Rail Bolt

Ratchet Driver shown with Hex Driver installed (not included).

C-3301 Rail & Post Fastener Includes Fastener, Washer, Nut and Plugs

C-3901 Rail Bolt Wrench

C-3302 Rail Bolt Fastener Includes Fastener, Washer, Nut and Plugs

3"

3"

1"

C-3103 Ratchet Driver 2 1/2"

C-3283 Key Lock 2" x 2-5/8" x 3/8"

C-3104 Hex Driver — 5mm (3/pack)

2 1/4"

2 5/8"

C-3601A – Antique Brass C-3601B – Bright Brass Heavy Duty Wall Rail Bracket

C-3002 Wall Rail Bracket

C-3105 Allen Wrench-5mm (3/pack)

• Faster, Easier, Gear Driven Rail Bolt Means No Nut To Start • Tighten Joints Securely With A Driver Or Allen Wrench • Options Include Angled Rail Bolt For Post-To-Post Rail Connections

C-3501 Newel Plate Fastener 4-5/8" x 4-5/8" Includes Plate and 13, 3" Fastening Screws

12 1/4"

C-3287 Mini Lock 1-1/4" Diameter

C-3286 Dowel Lock Includes – 6, 2-1/4" Baluster Screws and 1, 3-1/2" Newel Post Screw 12 1/4"

3"

2 3/4" 8 1/8"

C-8028 C-8028V (Veneered) Tread Bracket 1/4" Thick

C-8029 C-8029V (Veneered) Tread Bracket 1/4" Thick

1 1/2"

3"

3"

8 1/8"

C-3099 Miter Jig The fastest, easiest and most accurate way to mark and cut fittings.

C-4200 Newel Drop use with 3-1/2" Newel Post

C-4000 Newel Drop use with 3" Newel Post

1 1/2"

HARDWOOD

5 3/8"

6 3/16"

5 3/8"

5 1/2"

4 5/8"

5 1/2"

4 3/8"

4 3/8"

3 3/8"

4 1/2"

3 1/2"

3 3/4" 3/4"

3 5/16"

3 1/8" 3/4"

3/4"

3/4"

3/4"

5 3/8"

4 5/8"

4 5/16"

4"

4 3/16"

C-7217 Rosette

C-7317 Rosette

C-7237 Rosette

C-7337 Rosette

C-7318 Rosette

HARDWOOD

36

13/16"

7317-H Round Rosette

3/4"

3 1/8" 4 1/4"

3/4"

7337-H Oval Rosette

SOFTWOOD COFFMAN STAIR PARTS • SINCE 1874

HEMLOCK PROFILE INDEX

NEWELS

NEWELS

OVER-THE-POST

POST-TO-POST

4010PT-H 4014-H 4065-H Page 38 Page 38 Page 38

2 2

4004-H 4011F-H 4040-H 4040BT-H 4040F-H 4040S-H 4070-H 4500-H 4740-H Page 41 Page 38 Page 38,40 Page 40 Page 40 Page 40 Page 37 Page 41 Page 37

4810-H Page 37

4814-H Page 37

Top View

Top View

4840-H Page 37

Top View

9

BALUSTERS

BALUSTERS

PIN TOP

SQUARE TOP

5015-H 5015F-H 5040-H 5315-H 5610-H 5611-H Page 38 Page 38 Page 38 Page 38 Page 38 Page 38

5005-H 5060EE-H 5060-H 5067-H 5070-H 5105-H 5260EE-H 5360-H Page 41 Page 40 Page 40 Page 40 Page 40 Page 40 Page 41 Page 41

2

2

RAILS

5361-H Page 41

5800-H Page 37

2 1 1

6005-H 2-1/4w X 2-3/8h Page 37, 41

6010-H 1-5/8w X 2-3/8h Page 38, 39

6210-H 2-1/4w X 2-3/8h Page 38

6019-H 2-1/2w X 2-3/4h Page 37, 41

6910S-H 1-5/8w X 1-7/8h Page 39

6244-H 2-1/2w X 1-1/4h Page 37, 41

6344-H 3-1/4w X 1-1/4h Page 41

6042-H 2-1/4w X 1-1/4h Page 41

TRADITIONAL HEMLOCK 2 1/2"

2 1/2"

2 1/4"

1 5/8" 1/4"

1 1/4" 2 3/4"

2 3/8"

1/4"

1/4"

1/4" 1 5/8"

1 5/8"

6005-H with Fillet

6019-H with Fillet

1 5/8"

2 1/2"

6244-H with Fillet

6206-H Shoe Rail with Fillet

7/16"

1/4"

1 1/8"

1 5/8"

1 5/8"

6207-H Fillet

6208-H Fillet

6"

3 5/8"

5"

6 1/2"

5"

10 3/8" 3 5/8" 10 3/4"

5"

5 3/8"

10 3/4"

8 3/4"

48"

14 1/2"

8 3/4" 1 5/8"

22 5/16" 47 1/2"

42"

1 5/8"

54"

59"

53" 47"

14 1/2"

47"

59 1/2"

52 1/2"

47"

59" 41"

40 1/2"

47" 26 1/2"

16 3/16" 10 3/4"

42 "

59"

36"

32"

6 1/2" 59"

13"

14 1/2"

14 1/2"

6"

14 1/2"

10 3/4"

14 1/2"

5"

13"

17 3/8"

16 3/4" 1 5/8"

28 1/8" 14 1/2"

22 3/4" 1 5/8"

5800-H 5800-H 5800-H 5800-H 1 5/8" Sq. 1 5/8" Sq. 1 5/8" Sq. 1 5/8" Sq.

3 1/4"

3 1/4"

3 1/4"

3 1/4"

4740-H 3 1/4" Sq.

4745-H 3 1/4" Sq.

4840-H 3 1/4" Sq.

4843-H 3 1/4" Sq.

COFFMAN STAIR PARTS • SINCE 1874

3 1/4"

3 1/4"

4070-H 4073-H 3 1/4" Sq. 3 1/4" Sq.

3 1/4"

3 1/4"

4 3/8"

4814-H 4810-H 4813-H 3 1/4" Sq. 3 1/4" Sq. 4 3/8" Sq.

SOFTWOOD SECTION

4 3/8"

4817-H 4 3/8" Sq.

37

GEORGIAN HEMLOCK POST-TO-POST Available in ball top - Specify BT.

2 7/8"

2 1/2"

1/4" 1 5/8"

2 3/8"

2 1/2"

10"

13"

23 1/2"

23 1/2"

5"

6207-H Fillet

2 1/2"

8 1/4" 2 1/4"

5"

23 1/2"

8 1/4"

6210-H

59"

8 1/4"

23 1/2"

19 1/4"

8 1/4"

1 5/8"

2 1/2"

24"

28"

34"

59"

19 1/4"

1/4"

59"

47" 15 1/4"

1 1/8"

32"

2 1/2"

32"

19 1/4" 36"

36"

42"

48"

42"

8 1/2"

8 1/2"

1 5/8"

1 5/8"

8"

20 1/2"

14 1/2"

1 5/8"

1 5/8"

1 5/8"

5611-H 5611-H 5611-H 5611-H 1 5/8" Sq. 1 5/8" Sq. 1 5/8" Sq. 1 5/8" Sq.

8"

23"

28"

16"

6206-H Shoe Rail with Fillet

20"

8"

1 5/8"

3 1/4"

3 1/4"

3 1/4"

1 5/8"

3 1/4"

4040-H 4043-H 4045-H 4046-H 3 1/4" Sq. 3 1/4" Sq. 3 1/4" Sq. 3 1/4" Sq.

5315-H 5315-H 5315-H 1 5/8" Sq. 1 5/8" Sq. 1 5/8" Sq.

GEORGIAN HEMLOCK OVER-THE-POST /

11 1/4"

8 1/4"

2 3/8" 9 1/4"

9 1/4" 9 1/4" 1 5/8"

39"

36"

34"

31"

45"

42"

1/2"

1/4" 8"

8"

8"

8"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

5015-H 1 1/4" Sq.

5015-H 1 1/4" Sq.

5015-H 1 1/4" Sq.

1 1/4"

1 1/4"

5015-H 5015-H 1 1/4" Sq. 1 1/4" Sq.

20"

20"

2 3/4"

2 3/4"

2 3/4"

2 3/4"

2 3/4"

8"

8"

8"

8"

8"

1 1/4"

1 1/4"

39"

36"

34"

1 1/4"

1 1/4"

1"

28 1/2"

27"

48" 31"

42"

16"

1 1/4"

Newel top diameter is 1".

1/4"

39"

14"

5015-F-H 5015-F-H 5015-F-H 5015-F-H 5015-F-H 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq.

5015-H 1 1/4" Sq.

6016-H (7 piece) Bending Rail

36"

11"

8"

8"

34"

31"

6010-H

48"

42"

6016-H (9 piece) Bending Rail

1"

19 1/2"

20"

1/2" 1 1/8"

1 1/8"

1 1/8"

1 1/8"

1 1/8"

5040-H 5040-H 5040-H 5040-H 5040-H 1 1/8" Dia. 1 1/8" Dia. 1 1/8" Dia. 1 1/8" Dia. 1 1/8" Dia.

3 1/4"

3 1/4"

4010 PT-H 3 1/4" Sq.

4011F-H 3 1/4" Sq.

1"

27"

2 3/8" 1" 1"

6015 Bending Mould

27"

1"

6" 6" 27"

6" 6" 6" 16 1/2"

19 1/2"

38

21 1/2"

34"

31"

8 1/2"

60"

30"

8 1/2"

21 1/2" 40"

37"

8 1/2"

21 1/2"

11 1/2"

82 1/2"

27" 48"

44"

44"

32"

54 1/2"

43" 13"

16"

20"

14 1/2"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

2 3/4"

3 1/4"

5610-H 1 1/4" Sq.

5610-H 1 1/4" Sq.

5610-H 1 1/4" Sq.

5610-H 1 1/4" Sq.

5610-H 1 1/4" Sq.

4065-H 2 3/4" Dia. Adjustable

4014-H 3 1/4" Sq. Adjustable

SOFTWOOD SECTION

3 1/4"

3 1/4"

4011-H 4015-H 3 1/4" Sq. 3 1/4" Sq.

3 1/4"

4018-H 3 1/4" Sq.

COFFMAN STAIR PARTS • SINCE 1874

STAFFORD HEMLOCK RAIL

1/2"

2 1/4"

2 1/4"

1/4"

1 1/4"

2"

1/4"

1 7/8"

1 7/8"

1 7/8"

1 1/8" 1 5/8"

1/4"

1/4" 1 1/4" 1 5/8"

6910S-H

6910PS-H with Fillet

1/2"

2 1/2"

1 1/4"

6106-H Shoe Rail with Fillet

6107-H Fillet

6916-H Bending Rail

6915 Bending Mould

FITTINGS 2 1/4"

2 3/8"

1 5/8"

GEORGIAN 6010-H

The second digit of the fitting part number must match the second digit of the rail part number. Example: C-6010-H Rail = C-70XX Fittings C-6910-H Rail = C-79XX Fittings

7009-H Returned End

7010-H 7910-H Starting Easing With Cap

7011-H 7911-H Level Quarterturn 90°

7021-H 7921-H Quarterturn Cap 90°

2 1/4" 1 7/8"

1 5/8"

STAFFORD 6910S-H 7012S-H 7912S-H Up Easing

7013-H Over Easing

7014S-H Up Easing 90°

4 7/8" Center of Rail to Center of Newel Cap

7030-H 7930-H Left Hand Volute

7060-H 7065-H Left Hand Right Hand 2 Riser With Cap 90°

7071-H 7076-H Left Right Hand Hand 2 Riser No Cap 90°

COFFMAN STAIR PARTS • SINCE 1874

7019-H 7919-H Opening Cap

7020-H 7920-H Tandem Cap

7047-H 5" Center to Center Left or Right (LH shown)

4 7/8" Center of Rail to Center of Newel Cap

7035-H 7935-H Right Hand Volute

7081-H 7086-H 7981-H 7986-H Left Right Hand Hand 2 Riser With Cap 90°

7040-H 7940-H 7045-H 7945-H Left Hand Right Hand Turnout Turnout

7089-H 7989-H 2 Riser With Tandem Cap

7097-H 7997-H 2 Riser With Cap

7099-H 7999-H 2 Riser No Cap

SOFTWOOD SECTION

39

KENT HEMLOCK 6 3/8"

5 3/8"

2 1/4" 5 3/8"

5 3/8" 5 3/8" 2 3/8"

43"

40"

34"

31"

37"

18"

21"

24"

6 3/4"

6 3/4"

6 3/4"

1 1/4" 1 5/8"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

9 1/2"

1 1/4"

1 1/4"

5070-H 5070-H 5070-H 5070-H 5070-H 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq.

5067-H 5067-H 5067-H 5067-H 5067-H 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq.

1 1/4"

1 1/4"

42"

9 1/2"

9 1/2"

1 1/4"

1 1/4"

26 1/8"

39"

36"

9 1/2"

9 1/2"

9 1/2"

9 1/2"

24 1/8"

21 1/8"

34"

31"

1/4"

6010 P-H with Fillet

19 1/8"

16 1/8"

24"

24"

1/4" 1 1/8" 2 1/2" 5 3/4"

6106-H Shoe Rail with Fillet

5 3/4" 5 3/4"

17 1/2"

1/4"

17 1/2"

1 1/4"

17 1/2"

6107-H Fillet

37"

13 3/4"

10 3/4"

31"

43"

34"

34"

40"

37"

43"

19 3/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

1 1/4"

5105-H 1 1/4" Sq.

5105-H 1 1/4" Sq.

5105-H 1 1/4" Sq.

5060-H 1 1/4" S4S

5060-H 1 1/4" S4S

5060-H 1 1/4" S4S

5060-H 1 1/4" S4S

5060-H 1 1/4" S4S

2 3/4"

10" 2 3/4"

Top View showing Eased Edge.

5" 23" 23" 59 1/2" 47 1/2"

31"

36"

41" 23 3/4"

16 3/4"

1 1/4"

1 1/4"

1 1/4"

5060EE-H 5060EE-H 5060EE-H 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq.

2 1/2"

2 1/2"

2 1/2"

10"

13"

5"

2 1/2"

3 1/4"

3 1/4"

4040F-H 3 1/4" Sq.

4045F-H 3 1/4" Sq.

2 1/2"

2 1/2"

10"

13"

5"

3 1/2"

59"

5"

18 1/4"

23 1/2" 23 1/2"

10"

13"

23 1/2"

23 1/2"

5"

5"

5"

3 1/2"

3 1/2"

2 1/2"

2 1/2"

3 1/2"

23 1/2"

59"

18 1/4"

23 1/2"

18 1/4"

18 1/4"

23 1/2"

59"

23 1/2" 59"

59"

59"

47"

47"

47"

59"

59" 59"

21 1/4"

28 1/4"

25 1/4"

28"

23"

20"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

4040-H 3 1/4" Sq.

4043-H 3 1/4" Sq.

4045-H 3 1/4" Sq.

4046-H 3 1/4" Sq.

4040S-H 3 1/4" Sq.

4043S-H 3 1/4" Sq.

4045S-H 3 1/4" Sq.

4046S-H 3 1/4" Sq.

40

22"

19"

4040 BT-H 4043 BT-H 4045 BT-H 3 1/4" Sq. 3 1/4" Sq. 3 1/4" Sq.

4046 BT-H 3 1/4" Sq.

15"

33 1/4"

16"

3 1/4"

27"

3 1/4"

3 1/4"

3 1/4"

COFFMAN STAIR PARTS • SINCE 1874

SOUTHAMPTON HEMLOCK 2 1/2" 2 1/2"

2 1/4"

1/4"

1 1/8" 2 1/2"

1 5/8"

1 5/8"

1 5/8"

6005-H with Fillet

6019-H with Fillet

6206-H Shoe Rail with Fillet

7/16"

6244-H with Fillet

1/4"

1/4"

1/4"

6207-H Fillet

2 3/4"

2 3/8"

1 5/8"

1/4" 1 5/8"

1 1/4"

1 5/8"

6208-H Fillet

9 1/4" 9 1/4" 17 1/2"

9 1/4" 7 1/4" 17 1/2"

32"

17 1/2"

17 1/2"

42"

36"

32" 7 1/4"

21 1/4" 1 5/8"

1 5/8"

1 5/8"

1 5/8"

1 5/8"

5005-H 1 5/8" Sq.

5005-H 1 5/8" Sq.

5005-H 1 5/8" Sq.

5005-H 1 5/8" Sq.

Top View showing Chamfer.

3 1/2"

3 1/2"

6 1/2"

13"

1 5/8"

4 1/2"

4 1/2" 17 1/2"

6 1/2"

17 1/2"

7 1/2"

17"

59" 59"

47"

36"

32"

59"

47"

17 1/2" 17"

7 1/2"

1 5/8"

1 5/8"

5360-H 5360-H 5360-H 5360-H 1 5/8" S4S 1 5/8" S4S 1 5/8" S4S 1 5/8" S4S

3 1/2"

9 1/2"

48"

48"

15 1/4"

9 1/4"

42"

36"

54 1/2"

42 1/2"

9 1/2"

1 5/8"

1 5/8"

5361-H 1 5/8" Sq.

5361-H 1 5/8" Sq.

25"

31 1/2"

19 1/2"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

3 1/4"

4500-H 3 1/4" Sq.

4501-H 3 1/4" Sq.

4505-H 3 1/4" Sq.

4004-H 3 1/4" Sq.

4005-H 3 1/4" Sq.

ADDITIONAL HEMLOCK RAILS AND BALUSTERS HEAVY DUTY STAIR SYSTEM Create a more massive balustrade using these heavier rails and fillets with your choice of newel posts and 2-1/2" spindles.

WALL MOUNTED HANDRAILS When planning a wall mounted handrail, look to the sleek, simple lines of the 6042-H Rail combined with our brass finish wall rail brackets (page 32).

2 1/2"

3 1/4"

1/4" 1 1/4" 1/4"

2 1/2"

6344-H Handrail with Fillet

2 1/4" 1 1/4" 1 1/4"

7/16"

1/4"

6307-H Fillet

2 1/2"

1 1/4"

2 1/2"

6308-H Fillet

3 1/4"

6306-H Shoe Rail with Fillet

Top View showing Eased Edge.

CONTEMPORARY BALUSTERS An additional Coffman offering for contemporary applications. 42"

48 "

6042-H

COFFMAN STAIR PARTS • SINCE 1874

1 7/16"

1 7/16"

5260EE-H 1 7/16" Sq.

5260EE-H 1 7/16" Sq.

41

HEMLOCK STARTING STEPS 1 1/32"

These starting steps are designed for use with Georgian volutes/turnouts. All are shipped complete with the starting riser, starting tread, and all cove and shoe moulding.

1 1/4"

48"

7"

10 3/8"

48"

11 1/4"

8010-H Bullnose

NOTE: Please specify right or left hand when ordering single end starting steps. Reversible starting steps are available as an option.

10 3/8" 6 1/4"

8010-H

10 3/8"

1 1/32"

Specify finished stair width

1 1/4" 10 3/8"

48" 7"

10 3/8"

10 3/8" 6 1/4"

When measuring for finished stair width on double end starting steps, include all finish materials. Example: Sheetrock, skirtboard, decorative tread brackets, etc.

6 1/4"

8015-H Double End Bull Nose

8015-H

HEMLOCK TREADS AND RISERS LINEAL SKIRTBOARD S4S edge-glued and finger-jointed. 6974-H – 3/4" x 9-1/4" 6975-H – 3/4" x 11-1/4"

The products in this section are manufactured under highly controlled standards for beauty that will last a lifetime. All are manufactured without the use of finger-joints, excluding landing tread, which is offered both solid and finger-jointed. 8070S-H Tread No Return 1-1/32" x 11-1/2"

Treads and risers are available in standard lengths of 36", 42", 48", 54", 60" and 72".

8070S MR-H Coped Return Tread 1-1/32" x 11-1/2" 3/4"

7 1/2 - 8"

8370S-H Three Piece Winder Tread 1-1/32" x 36", 42" and 48" (RH shown)

8270S-H Two Piece Winder Tread 1-1/32" x 36", 42" and 48" (RH shown)

8470S-H Platform 1-1/32" x 36", 42" and 48"

1 1/32"

8075S-H Riser 3/4" x 7-1/2" and 8"

8080-H 1 1/4" Nosing 1-1/4" x 1-1/32" Lineal Stock

3 1/2"

3/4"

1/4"

8590-H Landing Tread 5-1/4 " Wide

12 3/4" 19/64" 1/4" 3/4" 13/64"

1 1/32" 1 1/4"

8080-13 MR-H 1 1/4" Coped Return Nosing 1-1/4" x 1-1/32" x 12-3/4"

2 1/4"

8090-H - 3-1/2" Wide 8590-H - 5-1/4" Wide

8090-H Landing Tread 3-1/2" Wide

1 1/32"

1/2" 16"

TREAD AND RISER CAPS

11 1/4"

6"

8095-H 13/16" Cove Mould 13/16" x 5/8" 4 3/4"

1/2"

12 3/4" 8"

1/2" 10 3/8"

7"

8911-H Reversible Starting End Cap

42

1/2"

5/8"

4 3/4"

6" 4 3/4" 1 1/32"

8085-H Shoe Mould 1/2" x 3/4"

8071-H 4-3/4" x 11-1/2" Tread Cap with Mitered Return Nosing and Cove Left or Right (RH shown)

SOFTWOOD SECTION

8072-H 4-3/4" x 11-1/2" Tread Cap with Nosing and Cove

8076-H 4-3/4" x 8" Riser Cap

COFFMAN STAIR PARTS • SINCE 1874

HEMLOCK SPINDLES AND TOPS

8"

8"

5"

3"

5"

3" 32"

26"

26"

26"

26"

48"

36"

32"

32"

3"

H-232-H 1 5/8" Sq.

36"

8"

5" 1 5/8"

32" 48"

8"

5" 3"

1 5/8"

1 5/8"

2 1/2"

H-236-H 1 5/8" Sq.

H-248-H 1 5/8" Sq.

H-332-H 2 1/2" Sq.

2 1/2"

2 1/2"

H-336-H 2 1/2" Sq.

H-348-H 2 1/2" Sq.

10 3/4" 8 3/4" 6 3/4"

6 3/4" 4 3/4" 1 1/2"

4 1/2"

9" 5" 7 1/2" 1 5/8" 1 1/4"

7" 9"

12"

1"

1 1/2"

1 5/8"

T-209-H 1 5/8" Sq.

T-207-H 1 5/8" Sq.

1 5/8"

T-212-H 1 5/8" Sq.

1 5/8"

1 5/8"

T-218-H 1 5/8" Sq.

T-224-H 1 5/8" Sq.

5 3/4"

4"

3 1/8"

BT-305-H Ball Top 2 3/8" Dia.

BT-406-H Ball Top 3 1/8" Dia.

36"

32" 10 3/4"

8 3/4"

6 3/4"

4 3/4"

4 1/2"

1 5/8"

2 1/2"

2 1/2"

2 1/2"

2 1/2"

T-228-H 1 5/8" Sq.

T-318-H 2 1/2 " Sq.

T-324-H 2 1/2" Sq.

T-328-H 2 1/2" Sq.

T-332-H 2 1/2" Sq.

T-336-H 2 1/2" Sq.

7"

7 3/4"

6 3/4" 1"

1"

1"

9"

1"

1"

5 1/4"

2 3/8"

3 1/4"

4 3/8"

BT-608-H Ball Top 5 1/4" Dia.

UT-306-H Urn Top 2 3/8" Dia.

UT-408-H Urn Top 3 1/4" Dia.

UT-510-H Urn Top 4 3/8" Dia.

4 1/8"

BT-507-H Ball Top 4 1/8" Dia.

28"

24"

18"

2 1/2"

6 5/8"

1"

1" 2 3/8"

6 3/4"

4 3/4"

4 1/2"

9"

14 1/2"

14 1/2"

14 1/2"

14 1/2"

28"

24"

9" 18"

4 1/2"

14 1/2"

14 1/2"

1"

1 1/4"

4 3/4"

10"

3"

2 1/2" 1"

1"

1"

1"

1"

7"

5"

4"

4 3/4"

4"

1"

1"

2 3/8"

3 1/4"

2 3/8"

3 1/8"

5 1/4"

2 3/8"

3 3/8"

5"

ST-304-H Southampton Top 2 3/8" Dia.

ST-405-H Southampton Top 3 1/4" Dia.

RT-305-H Round Top 2 3/8" Dia.

RT-406-H Round Top 3 1/8" Dia.

RT-608-H Round Top 5 1/4" Dia.

KT-303-H Kent Top 2 3/8" Dia.

KT-403-H Kent Top 2 3/8" Dia.

AD-610-H Acorn Drop 5" Dia.

COFFMAN STAIR PARTS • SINCE 1874

SOFTWOOD SECTION

43

Ordering Specifications for Newels Check local building codes for required height and baluster spacing. For more information and installation instructions refer to Coffman’s C-165 Stair Building Guide, page 3.

NEWELS Newels serve as the main structural support of the balustrade portion of the stair. Proper placement, coupled with proper installation techniques, is critical to a structurally sound and code compliant staircase. Newels should be placed at the top and bottom of every stair, at all directional changes, and at intervals of not more than 8' on level balcony runs.

LANDING

INTERMEDIATE LANDING NEWEL

BALCONY

BALCONY LANDING NEWEL UP STARTING NEWEL

POST-TO-POST NEWELS PTP newels are designed with upper (top) square blocks that will receive the handrail. Standard block sizes (5", 10" and 13") are provided for use at various locations of the stair.

INTERMEDIATE LANDING NEWELS Intermediate landing newels will have angled rail entering and exiting the upper square block from adjacent sides. Because the newel is basically making up for two rise dimensions in the stair (the last rise before the intermediate landing as well as the first rise of the LANDING second straight run), a longer square block is necessary to keep consistent rake rail heights from the first run to the second. A newel with a minimum 13" top block will be required.

BALCONY INTERMEDIATE NEWELS Balcony intermediate BALCONY newels will have level rail entering and exiting the upper block of the newel. A 5" top block is recommended.

44

INTERMEDIATE BALCONY NEWEL

STARTING NEWELS A 5" top block will always work at the beginning of the stair. Larger top blocks are unnecessary and can appear BALCONY top-heavy.

BALCONY LANDING NEWELS Balcony newels will have angled rail entering from the lower side of the newel with level rail exiting from the top of BALCONY the upper block. Because only one rise dimension is involved, a 10" top block will normally be required.

USE OF FITTINGS WITH PTP NEWELS The use of easings and goosenecks in PTP systems make the need for longer square blocks unnecessary. Order a 5" top block newel at all locations.

COFFMAN STAIR PARTS • SINCE 1874

Ordering Specifications for Newels Check local building codes for required height and baluster spacing. For more information and installation instructions refer to Coffman’s C-165 Stair Building Guide, page 3.

OVER-THE-POST NEWELS All Over-the-Post newels are manufactured with a 3/4" diameter pin turned into the top of the newel that will be installed into the underside of the fittings used in the rail system.

Recommended heights for the following newel placements are based on a 34" rake rail height, a 7-1/2" rise, a 10" run, and a 1-1/4" tread overhang and are dependent on the location of the newel matching the standard location listed with the application. Variances of up to 3/4" can be expected in certain conditions and should be accounted for when trying to achieve minimum code heights.

OTP STARTING NEWEL HEIGHTS (For 34" Rake Rail Height)

OTP newels are manufactured in both doweled bottom and square bottom designs. Doweled bottom newels have a 1-1/2" diameter dowel designed into the bottom of the newel that is used to install the starting newel into a starting step. The height of these newels cannot be adjusted, making correct specification critical in achieving desired rake rail height.

STARTING EASING

TURNOUT

VOLUTE

ASCENDING VOLUTE

VERTICAL VOLUTE

Net Measurement

Net Measurement

Net Measurement

Net Measurement

Measurement

36-1/2"

40-1/2"

39"

36"

33-7/8"

NET MEASUREMENT

ADJUSTABLE NEWELS An option available in all Coffman families to the fixed length doweled newels is the adjustable newel. These newels have a 1-1/2" diameter by 10" deep hole bored into the bottom of the newel and are shipped with a loose 19" dowel in the carton. These newels allow the installer to trim the newel (up to 4") to achieve exact rake rail heights over a wide variety of applications.

NEWEL CENTERED ON RISER

NET MEASUREMENT

MEASUREMENT: TOP OF TREAD TO TOP OF NEWEL

PLACEMENT DICTATED BY TEMPLATE

NEWEL CENTERED ON RISER

NOTE: Rake rail height requirements other than 34" can be adjusted on a 1:1 basis. Example: For a 36" rake rail height, add 2" to the base number. For a 30" rake rail height, subtract 4". Check local building codes. NOTE: 1" movement in the newel from standard placement will change the rail height by approximately 3/4". Moving newel placement away from the second riser raises the rail height and moving it closer to the second riser will lower the rail height.

10" 4" Range of Cut

COFFMAN STAIR PARTS • SINCE 1874

45

Ordering Specifications for Balusters Check local building codes for required height and baluster spacing. For more information and installation instructions refer to Coffman’s C-165 Stair Building Guide, page 3. All balusters fall into one of the following categories:

All baluster pins are 3/4" long by 3/4" diameter and are turned with chamfered bottoms and a centered glue ring. Exception: 5015H, 5610H pins are 5/8" long by 5/8" diameter. Top diameter on the pin top balusters will vary according to baluster size. 1-1/4" Baluster - 5/8" diameter 1-5/8" Baluster - 5/8" diameter 1-3/4" Baluster - 3/4" diameter (except C-5611 which is 5/8") 1-9/16" Baluster - 3/4" diameter Forged - 1/2" diameter

PIN TOP - Pin top balusters have turned, round tops that will be inserted into holes drilled into unplowed handrail. SQUARE TOP - Square top balusters have a turned portion, leaving a square upper and lower portion. Installation of square top balusters will require a plowed handrail.

PIN TOP

SQUARE TOP

FORGED IRON PIN TOP - Forged baluster pin tops are 1/2" diameter. The stair’s rake and balcony rail height, along with code considerations on baluster spacing, will determine the length and quantity of balusters required on any given job. The tables below list the quantity and length of the balusters necessary for each rake application for a 34" rake rail height.

BALUSTER QUANTITY AND LENGTH (For 34" Rake Rail Height)

All pin top balusters have a guaranteed 3" minimum top straight portion for trimming and insertion.

CUT-AWAY VIEW OF RAIL

BALCONY BALUSTER LENGTH

STARTING EASING

TURNOUT

VOLUTE

ASCENDING VOLUTE VERTICAL VOLUTE

BALUSTERS UNDER STARTING FITTINGS QUANTITY – 1

LENGTH 39"

QUANTITY – 2 C-7?40, C-7?45

QUANTITY – 6 1-1/4" SQUARE

QUANTITY – 6 1-1/4" SQUARE

QUANTITY – 1 C-7?41, C-7?46

QUANTITY – 5 1-3/4" SQUARE

QUANTITY – 5 1-3/4" SQUARE

LENGTH 43"

LENGTH 41"

LENGTH 39"

QUANTITY – 1

Baluster length requirements for the balcony will match the balcony rail height. If an exact baluster length is not available, simply round up to the next available length. (Example: For a 38" balcony rail height, order a 39" baluster.)

BALCONY BALUSTER LENGTH = BALCONY RAIL HEIGHT

LENGTH 39"

BALCONY BALUSTER QUANTITY

BALUSTERS ON TREADS

1-1/4" BALUSTER SQUARE

4-1/2"

1-3/4" BALUSTER SQUARE

4-5/8" Exception: For 1-3/4" Pin Top Baluster with 5/8" diameter tops (i.e. C-5611) use:

4-1/2" MAXIMUM CENTER-TO-CENTER SPACING (Under 4" Sphere Rule) FRONT BALUSTER – 36"

SECOND BALUSTER – 39"

THIRD BALUSTER (optional) – 41"

Adjustments to rake rail heights from 34" can be accommodated on a 1:1 basis. Examples: For a 36" rail height, simply add 2" to the given length and order the nearest baluster length (rounding up if necessary). For a 30" rake rail height, subtract 4" from the given length and order the nearest baluster length (rounding up if necessary). NOTE: 44" balusters are available in all square bottom profiles. See page 50.

46

Spacing codes vary but generally fall under the 4" sphere rule. The dimensions listed are recommended center-to-center spacing measurements that will safely comply with this code. To obtain the quantity of balusters for individual balcony runs, divide the length of the balcony run by the corresponding center-to-center spacing and round down. COFFMAN STAIR PARTS • SINCE 1874

Ordering Specifications for Rails Check local building codes for required height and baluster spacing. For more information and installation instructions refer to Coffman’s C-165 Stair Building Guide, page 3.

RAIL AND LINEAL BALUSTRADE COMPONENTS Rail and lineal balustrade components, like other lineal products, are offered in even lengths from 4' to 16'. For rake portions of the stair, measure along the slope of the stair or use the lineal formula: Number of Treads x 13" (rounded up to the nearest even length).

BENDING RAIL BALUSTRADE COMPONENTS BENDING RAIL

BENDING MOULD PIN TOP BALUSTER

SQUARE TOP BALUSTER

PLOWED RAIL is moulded with a recessed bottom for insertion of square top balusters.

UNPLOWED RAIL has a flat bottom that will be drilled for the insertion of pin top blausters.

LINEAL RAIL COMPONENTS consist of sub rail, shoe rail, and fillet. Shoe rail is a plowed moulding designed to accept the bottom of the baluster. Sub rail is used under unplowed handrail with square top balusters in Post-to-Post systems to provide a more substantial look to the balustrade. Fillet is a finished moulding that will be installed between the balusters in plowed rail, shoe rail and sub rail.

SUB RAIL

Each ply comprising the bending rail is designed and manufactured with a tongue and groove bead to create an alignment of the plys. When assembled, Coffman bending rail results in a match of the standard rail profile.

The minimum radius achievable with each rail profile will depend on several factors. These factors include such variables as the thickness of each ply, the overall thickness of the handrail, the height of the handrail, the angle of the stair, and whether the rail is bent on the rake or on the level portion of the stair. The minimum recommended radius for use on both rake and level applications are listed in the chart for each Coffman bending rail profile.

FILLET

PLOWED RAIL

The key components of curved rail construction are bending rails and bending moulds which are available in all Coffman rail profiles. Bending rail is most easily understood when imagining a standard rail profile cut into thin, vertical strips. Bending mould is a form, moulded to the outside profile of the handrail, that is used to cradle the bending rail as it is being shaped to the stair.

BENDING RAIL MINIMUM RADIUS

SHOE RAIL

RAIL ITEM

SHOE RAIL

SUB RAIL FILLET

COFFMAN STAIR PARTS • SINCE 1874

RAKE RAIL

BALCONY RAIL

TRADITIONAL C-6016 (7 Piece)

42"

48"

TRADITIONAL C-6016 (9 Piece)

36"

42"

BRISTOL C-6116

48"

54"

CLASSIC C-6216-W

48"

54"

RICHMOND C-6416

48"

54"

LIBERTY C-6516

42"

48"

VIRGINIAN C-6616

42"

48"

MARION C-6716

48"

54"

ART DECO C-6816

48"

54"

HEMLOCK 6016-H, 6916-H

42"

48"

47

Ordering Specifications for Fittings Check local building codes for required height and baluster spacing. For more information and installation instructions refer to Coffman’s C-165 Stair Building Guide, page 3.

FITTINGS Fittings, components used within rail systems, can be incorporated into both PTP and OTP stairs. In OTP rail systems, fittings are required to start the rail system, to make directional and height transitions, to carry the rail over intermediate balcony newels, and to terminate the rail when using a half newel. A good check of any Over-the-Post parts list is to make certain that a fitting is ordered for each newel, including half newels, in the stair. NOTE: Coffman fittings are shipped with all necessary rail bolts, 1" tapered rail plugs, templates, and full instructions to provide a quick, accurate, and professional installation.

FITTING DEFINITIONS CAP VS. NO CAP CAP All fittings fall into two categories: (1) those designed and manufactured with a cap and (2) those manufactured without a cap. All fittings with caps have a 3/4" diameter hole bored in the under side of the cap to receive the top pin of the Overthe-Post newel. Fittings without caps are designed to carry the baluster line through a transition without the use of a newel. Capped fittings are clearly identified in both the drawings and product descriptions.

FITTING ORIENTATION Fitting orientation is determined from the bottom of the stair looking up. All fittings in the photo to the right are right-hand.

GOOSENECK FITTINGS Gooseneck fittings are used to accommodate transitions in height and/or direction at intermediate and balcony landings. NOTE: It is recommended that a minimum difference of 4" between rake rail height and balcony rail height be kept on all Over-the-Post systems.

GOOSENECK FITTING

48

NO CAP

ONE-RISE GOOSENECK DESIGNED FOR A 4" DIFFERENCE IN RAKE TO BALCONY HEIGHT BALCONY RAIL HEIGHT EX. 38"

ONE-RISE GOOSENECK

RAKE RAIL HEIGHT EX. 34"

ONE-RISE VS. TWO-RISE Most goosenecks are offered in both onerise and two-rise versions. The one-rise gooseneck is manufactured with the lower easing attached and is limited to use on stairs where the difference in rake rail height to balcony rail height is 4" (Example: 34" rake rail height to 38" balcony rail height). The corresponding two-rise gooseneck makes the same height and/or directional change as its one-rise counterpart but is shipped with the lower easing unattached. This versatile two-piece design allows the installer to trim or extend the straight section of the gooseneck to a height that will work in any situation. Two-rise goosenecks work in applications where the difference in rake rail height is less than 4" (Example: 34-1/2" to 38"), greater than 4" (Example: 34" to 42"), or unknown at the time of ordering.

ONE-RISE

TWO-RISE

GOOSENECK FITTINGS

TWO-RISE GOOSENECK

COFFMAN STAIR PARTS • SINCE 1874

Ordering Specifications for Fittings Check local building codes for required height and baluster spacing. For more information and installation instructions refer to Coffman’s C-165 Stair Building Guide, page 3.

SUGGESTED GOOSENECKS FOR SOME COMMON APPLICATIONS PLATFORM

PLATFORM

L

C-7060 C-7065 Left Hand Right Hand 2 Riser With Cap

5 1/2" Center of Rail to Center of Rail

2nd FLOOR

2nd FLOOR

C-7070 C-7075 C-7071 C-7076 Left Hand Right Hand No Cap

2nd FLOOR

L

WE

C-7096 C-7097 With Cap

C-7090 C-7095 C-7091 C-7094 Left Hand Right Hand Landing Return

C-7080 C-7085 C-7081 C-7086 Left Hand Right Hand With Cap

NEWEL

SQUARE TOP NEWEL

WELLHOLE 5 1/2"

NE

NE

WELLHOLE 5 1/2"

NEWEL

L WE

2nd FLOOR

NO EL W NE

NO EL W NE

WE

NE

C-7050 C-7055 Left Hand Right Hand 2 Riser No Cap 2nd FLOOR

NE

L

WE

N O EL W NE

NO EL W NE

2nd FLOOR

PLATFORM

PLATFORM

SPECIALTY FITTINGS

C-7019 OPENING CAP

C-7013 OVER EASING C-7020 TANDEM CAP An over easing OVER EASING is designed to carry the rail system from the rake (angled) portion of the stair to the level, balcony portion without the use of a gooseneck. This elegant, flowing look is achieved by combining the over easing with a transitional fitting such as a tandem cap.

C-7089 (LOWER EASING DISCARDED) C-7014S 90° UP EASING

C-7088 C-7089 With Tandem Cap

C-7098 C-7099 No Cap

C-7007 COPED END

RAIL PROFILE COPED (SHAPED) INTO END OF FITTING

COPED ENDS Some Coffman families contain a Coped End which is a fitting that has the profile of the rail shaped, or coped, into one end of a straight piece of rail. This fitting is used in conjunction with an opening cap (Example C-7019) or a gooseneck incorporating an opening cap (Example C-7097), to accomodate nonstandard angle changes.

STANDARD VOLUTE (C-7035) FOR 34" RAKE RAIL HEIGHT

ASCENDING VOLUTE C-7033 FOR SAME 34" RAKE RAIL HEIGHT

C-7086 TWO-RISE GOOSENECK WITH CAP

90° UP EASING 90° up easings are used to make a horizontal to vertical 90° transition in a rail system.

S-SERIES FITTINGS Coffman’s S-Series fittings accommodate the continuous rail codes on partial-open stairs. Specify RightHand or Left-Hand (from the bottom of the stair looking up).

C-7047 LEFT-HAND S-FITTING

COFFMAN STAIR PARTS • SINCE 1874

C-7011 LEVEL QUARTERTURN NO CAP

COMBINING FITTINGS Standard fittings will sometimes have to be site-assembled to complete a height and/or directional transition. Basically all stair applications can be satisfied using a combination of currently available Coffman fittings. In the example shown of a 180° turn at balcony, you will need a tworise gooseneck with cap that turns right 90° to sit on top of the newel along with a level quarterturn without a cap to complete the 180° turn.

ASCENDING VOLUTES Coffman’s ascending volutes (C-7X33, C-7X38) are designed to begin their ascent much sooner than their standard counterparts, allowing for the use of a shorter newel and shorter balusters on top of the bullnose starting step. This lower, more proportional beginning of an Over-the-Post system, coupled with the graceful, flowing transition from the volute to the rail, makes the ascending volute an attractive addition to any stair.

49

REPETITIVE SPECIALS Coffman’s extensive Specials Program has created a number of turnings and mouldings that are readily available in addition to our standard product offering. While not part of a standard Coffman family, these products are manufactured on a repetitive basis making them a timely and cost effective option. Call Coffman for a quote.

• Rails are available plowed 1-3/4" and 2-1/4". • Shoe, Fillet are available. • Fittings are available.

C-6600 Rail 3 1/2" W x 2" H

C-4122 Newel 3" x 57 1/2"

C-4122BT Newel 3" x 57 1/2"

C-4124 Newel 3" x 50"

C-4640 Newel 4 1/2" x 48"

C-4125BT Newel 3" x 57 1/2"

C-4645 Newel 4 1/2" x 60"

C-5011 Baluster 1 1/4"Sq. x 36", 41"

C-4610 Newel 4 1/2" x 41"

C-5041 Baluster 1 1/4"Sq. x 36", 41"

C-4612 Newel 4 1/2" x 43 1/2"

C-5341 Baluster Eased Edge 1 5/8"Sq. x 36",42"

C-4615 Newel 4 1/2" x 60"

Check local building codes.

C-6310 Rail 3 1/2" W x 2 3/8" H

C-5120 Baluster 1 1/8"Dia. x 34", 36", 39", 41"

C-5220 Baluster 1 9/16"Dia. x 34", 36", 39", 41"

C-5612 Baluster 2 1/4" Sq. x 31", 34", 36", 39", 41"

C-5602 Baluster 2 1/4" Sq. x 31", 34", 36", 39", 41"

C-5215 Baluster 1 3/4" Sq. x 34", 36", 39", 41"

44" BALUSTERS Available in ALL Coffman Square Bottom Profiles • 44" overall length with no pin. • Turning will match the 36" baluster of that profile with the additional length added to the bottom block. • Bottom of baluster will have a 1/4" x 4" hole predrilled for use with provided wooden dowel pin or optional C-3203 Baluster Fastener.

50

Matches 36" Profile

44"

4"

44" Balusters are used under Turnouts (34"+ Rake Rail Heights), under Volutes (35"+ Rake Rail Heights), and on stairs with higher rake rail heights.

44" Balusters are also used in systems where a rake orientation is preferred with the baluster squares.

COFFMAN STAIR PARTS • SINCE 1874

Index ITEM

PAGE

WONDERAIL 1034 . . . . . . . . . . . . . 34 1038 . . . . . . . . . . . . . 34 1044 . . . . . . . . . . . . . 34 1134 . . . . . . . . . . . . . 35 1138 . . . . . . . . . . . . . 35 1234 . . . . . . . . . . . . . 35 1238 . . . . . . . . . . . . . 35 4002 . . . . . . . . . . . . . 35 4003 . . . . . . . . . . . . . 35 4242 . . . . . . . . . . . . . 35 4245 . . . . . . . . . . . . . 35 4540BT . . . . . . . . . . . 34 4542BT . . . . . . . . . . . 34 4542BT Prepped . . . . 34 4547BT . . . . . . . . . . . 34 ACCESSORIES 23XX . . . . . . . . . . . . . 30, 31 29XX . . . . . . . . . . . . . 32 3000 . . . . . . . . . . . . . 34, 35, 36 3001 . . . . . . . . . . . . . 36 3002 . . . . . . . . . . . . . 36 3003 . . . . . . . . . . . . . 36 3004 . . . . . . . . . . . . . 36 3005 . . . . . . . . . . . . . 36 3008 . . . . . . . . . . . . . 36 3009 . . . . . . . . . . . . . 36 3010 . . . . . . . . . . . . . 34, 35, 36 3015 . . . . . . . . . . . . . 34, 35, 36 3020 . . . . . . . . . . . . . 34, 35, 36 3099 . . . . . . . . . . . . . 36 3201 . . . . . . . . . . . . . 36 3203 . . . . . . . . . . . . . 36 3203B . . . . . . . . . . . . 36 3283 . . . . . . . . . . . . . 36 3284 . . . . . . . . . . . . . 36 3286 . . . . . . . . . . . . . 36 3287 . . . . . . . . . . . . . 36 3301 . . . . . . . . . . . . . 36 3302 . . . . . . . . . . . . . 36 3501 . . . . . . . . . . . . . 36 3505 3" . . . . . . . . . . . 34, 36 3505 3-1/2" . . . . . . . . 35, 36 3505 3-1/4" HEM . . . 36 3505 4-3/8" HEM . . . 36 3601 . . . . . . . . . . . . . 31, 36 3901 . . . . . . . . . . . . . 36 4000 . . . . . . . . . . . . . 36 4200 . . . . . . . . . . . . . 36 7000 . . . . . . . . . . . . . 23 7217 . . . . . . . . . . . . . 36 7237 . . . . . . . . . . . . . 36 7317 . . . . . . . . . . . . . 35, 36 7317 HEM. . . . . . . . . 36 7318 . . . . . . . . . . . . . 20, 36 7337 . . . . . . . . . . . . . 34, 35, 36 7337 HEM. . . . . . . . . 36 8028 . . . . . . . . . . . . . 36 8029 . . . . . . . . . . . . . 36 NEWELS 2450 . . . . . . . . . . . . . 31 2452 . . . . . . . . . . . . . 31 2940 . . . . . . . . . . . . . 32 2942 . . . . . . . . . . . . . 32 4001 . . . . . . . . . . . . . 4, 11, 22 4002 . . . . . . . . . . . . . 11, 22, 35 4003 . . . . . . . . . . . . . 11, 22, 35 4003L . . . . . . . . . . . . 11, 22 4004 . . . . . . . . . . . . . 4, 11, 22 4004BT . . . . . . . . . . . 4, 11, 22 4004 HEM. . . . . . . . . 37, 41 4005 . . . . . . . . . . . . . 11, 22 4005BT . . . . . . . . . . . 11, 22 4005 HEM. . . . . . . . . 41 4006 . . . . . . . . . . . . . 11, 22 4006BT . . . . . . . . . . . 11, 22 4007 . . . . . . . . . . . . . 4, 11 4008 . . . . . . . . . . . . . 11 4009 . . . . . . . . . . . . . 11 4010 . . . . . . . . . . . . . 4, 8 4010PT HEM . . . . . . 37, 38 4011 . . . . . . . . . . . . . 8 4011 HEM. . . . . . . . . 38 4011F HEM. . . . . . . . 37, 38

ITEM

PAGE

4012 . . . . . . . . . . . . . 8 4014 . . . . . . . . . . . . . 8 4014 HEM. . . . . . . . . 37, 38 4015 . . . . . . . . . . . . . 8 4015 HEM. . . . . . . . . 38 4017 . . . . . . . . . . . . . 8 4018 . . . . . . . . . . . . . 8 4018 HEM. . . . . . . . . 38 4019 . . . . . . . . . . . . . 4, 8 4030 . . . . . . . . . . . . . 8 4035 . . . . . . . . . . . . . 8 4038 . . . . . . . . . . . . . 8 4040 . . . . . . . . . . . . . 4, 9 4040S . . . . . . . . . . . . 4, 9 4040BT . . . . . . . . . . . 4, 9 4040 HEM. . . . . . . . . 37, 38, 40 4040F HEM. . . . . . . . 37, 40 4040S HEM. . . . . . . . 37, 40 4040BT HEM . . . . . . 37, 40 4042 . . . . . . . . . . . . . 9 4042S . . . . . . . . . . . . 9 4042BT . . . . . . . . . . . 9 4043 HEM. . . . . . . . . 38, 40 4043S HEM. . . . . . . . 40 4043BT HEM . . . . . . 40 4045 . . . . . . . . . . . . . 9 4045S . . . . . . . . . . . . 9 4045BT . . . . . . . . . . . 9 4045 HEM. . . . . . . . . 38, 40 4045F HEM. . . . . . . . 40 4045S HEM. . . . . . . . 40 4045BT HEM . . . . . . 40 4046 . . . . . . . . . . . . . 9 4046S . . . . . . . . . . . . 9 4046L . . . . . . . . . . . . 9 4046BT . . . . . . . . . . . 9 4046 HEM. . . . . . . . . 38, 40 4046S HEM. . . . . . . . 40 4046BT HEM . . . . . . 40 4050 . . . . . . . . . . . . . 8 4055 . . . . . . . . . . . . . 9 4055BT . . . . . . . . . . . 9 4058 . . . . . . . . . . . . . 9 4058BT . . . . . . . . . . . 9 4060 . . . . . . . . . . . . . 8, 10 4061 . . . . . . . . . . . . . 8, 10, 18 4063 . . . . . . . . . . . . . 8, 10, 18 4064 . . . . . . . . . . . . . 8, 10, 18 4065 . . . . . . . . . . . . . 8, 10, 18 4065 HEM. . . . . . . . . 37, 38 4066 . . . . . . . . . . . . . 8, 10, 18 4070 . . . . . . . . . . . . . 4, 22 4070 HEM. . . . . . . . . 37 4072 . . . . . . . . . . . . . 22 4073 . . . . . . . . . . . . . 22 4073L . . . . . . . . . . . . 22 4073 HEM. . . . . . . . . 37 4074 . . . . . . . . . . . . . 4, 20 4075 . . . . . . . . . . . . . 4, 29 4076 . . . . . . . . . . . . . 4, 20 4077 . . . . . . . . . . . . . 4, 29 4090 . . . . . . . . . . . . . 29 4091 . . . . . . . . . . . . . 4, 29 4092 . . . . . . . . . . . . . 29 4095 . . . . . . . . . . . . . 29 4096 . . . . . . . . . . . . . 4, 29 4097 . . . . . . . . . . . . . 28 4122 . . . . . . . . . . . . . 50 4122BT . . . . . . . . . . . 50 4124 . . . . . . . . . . . . . 50 4125BT . . . . . . . . . . . 50 4130 . . . . . . . . . . . . . 4, 12 4135 . . . . . . . . . . . . . 12 4150 . . . . . . . . . . . . . 4, 13 4152 . . . . . . . . . . . . . 13 4155 . . . . . . . . . . . . . 13 4156 . . . . . . . . . . . . . 13 4160 . . . . . . . . . . . . . 12 4163 . . . . . . . . . . . . . 12 4165 . . . . . . . . . . . . . 12 4210 . . . . . . . . . . . . . 4, 10 4215 . . . . . . . . . . . . . 10 4240 . . . . . . . . . . . . . 4, 11 4242 . . . . . . . . . . . . . 11, 35 4245 . . . . . . . . . . . . . 11, 35 4245L . . . . . . . . . . . . 11

ITEM

PAGE

4250 . . . . . . . . . . . . . 14 4251 . . . . . . . . . . . . . 14 4252 . . . . . . . . . . . . . 14 4255 . . . . . . . . . . . . . 14 4256 . . . . . . . . . . . . . 14 4257 . . . . . . . . . . . . . 14 4260 . . . . . . . . . . . . . 16 4261 . . . . . . . . . . . . . 16 4262 . . . . . . . . . . . . . 16 4270 . . . . . . . . . . . . . 4, 14 4271 . . . . . . . . . . . . . 4, 16 4272 . . . . . . . . . . . . . 4, 14 4275 . . . . . . . . . . . . . 14 4276 . . . . . . . . . . . . . 16 4277 . . . . . . . . . . . . . 14 4280 . . . . . . . . . . . . . 4, 15 4280L . . . . . . . . . . . . 15 4281 . . . . . . . . . . . . . 4, 17 4281L . . . . . . . . . . . . 17 4282 . . . . . . . . . . . . . 4, 15 4282L . . . . . . . . . . . . 15 4285 . . . . . . . . . . . . . 15 4285L . . . . . . . . . . . . 15 4286 . . . . . . . . . . . . . 17 4286L . . . . . . . . . . . . 17 4287 . . . . . . . . . . . . . 15 4287L . . . . . . . . . . . . 15 4474 . . . . . . . . . . . . . 20 4476 . . . . . . . . . . . . . 20 4500 HEM. . . . . . . . . 37, 41 4501 HEM. . . . . . . . . 41 4505 HEM. . . . . . . . . 41 4510 . . . . . . . . . . . . . 4, 18 4511 . . . . . . . . . . . . . 4, 18 4515 . . . . . . . . . . . . . 18 4516 . . . . . . . . . . . . . 18 4530 . . . . . . . . . . . . . 4, 18 4531 . . . . . . . . . . . . . 4, 18 4535 . . . . . . . . . . . . . 18 4540BT . . . . . . . . . . . 4, 19, 34 4541BT . . . . . . . . . . . 19 4542BT . . . . . . . . . . . 19, 34 4242BT Prepped . . . . 34 4544BT . . . . . . . . . . . 4, 19 4545BT . . . . . . . . . . . 19 4546BT . . . . . . . . . . . 19 4547BT . . . . . . . . . . . 19, 34 4548BT . . . . . . . . . . . 19 4550BT . . . . . . . . . . . 4, 19 4555BT . . . . . . . . . . . 19 4556BT . . . . . . . . . . . 19 4557BT . . . . . . . . . . . 19 4560BT . . . . . . . . . . . 4, 19 4563 . . . . . . . . . . . . . 4, 18 4564BT . . . . . . . . . . . 19 4565 . . . . . . . . . . . . . 18 4566BT . . . . . . . . . . . 19 4567BT . . . . . . . . . . . 19 4610 . . . . . . . . . . . . . 50 4612 . . . . . . . . . . . . . 50 4615 . . . . . . . . . . . . . 50 4640 . . . . . . . . . . . . . 50 4645 . . . . . . . . . . . . . 50 4660 . . . . . . . . . . . . . 10 4661 . . . . . . . . . . . . . 10 4662 . . . . . . . . . . . . . 10 4690 . . . . . . . . . . . . . 28 4691 . . . . . . . . . . . . . 28 4692 . . . . . . . . . . . . . 28 4695 . . . . . . . . . . . . . 29 4696 . . . . . . . . . . . . . 29 4697 . . . . . . . . . . . . . 28 4740 HEM. . . . . . . . . 37 4745 HEM. . . . . . . . . 37 4810 . . . . . . . . . . . . . 4, 16 4810 HEM. . . . . . . . . 37 4813 HEM. . . . . . . . . 37 4814 HEM. . . . . . . . . 37 4815 . . . . . . . . . . . . . 16 4817 HEM. . . . . . . . . 37 4840 . . . . . . . . . . . . . 4, 17 4840 HEM. . . . . . . . . 37 4843 HEM. . . . . . . . . 37 4845 . . . . . . . . . . . . . 17 4860 . . . . . . . . . . . . . 16 4862 . . . . . . . . . . . . . 16

COFFMAN STAIR PARTS • SINCE 1874

ITEM

PAGE

4890 . . . . . . . . . . . . . 4, 28 4891 . . . . . . . . . . . . . 28 4892 . . . . . . . . . . . . . 4, 28 BALUSTERS Any Profile 44" . . . . . 50 25XX . . . . . . . . . . . . . 31 28XX . . . . . . . . . . . . . 30 29XX . . . . . . . . . . . . . 32, 33 5005 . . . . . . . . . . . . . 5, 9, 19, 22, 35 5005 HEM. . . . . . . . . 37, 41 5011 . . . . . . . . . . . . . 50 5015 . . . . . . . . . . . . . 5, 8, 9, 18, 34 5015 HEM. . . . . . . . . 37, 38 5025 . . . . . . . . . . . . . 5, 8 5035 . . . . . . . . . . . . . 5, 8 5040 . . . . . . . . . . . . . 5, 8 5040 HEM. . . . . . . . . 37, 38 5041 . . . . . . . . . . . . . 50 5050 . . . . . . . . . . . . . 5, 9 5060 . . . . . . . . . . . . . 5, 21 5060 HEM. . . . . . . . . 37, 40 5067 . . . . . . . . . . . . . 5, 9, 19 5067 HEM. . . . . . . . . 37, 40 5070 . . . . . . . . . . . . . 5, 9 5070 HEM. . . . . . . . . 37, 40 5105 . . . . . . . . . . . . . 5, 9, 19, 35 5105 HEM. . . . . . . . . 37, 40 5120 . . . . . . . . . . . . . 50 5141 . . . . . . . . . . . . . 5, 13 5151 . . . . . . . . . . . . . 5, 12, 13 5201 . . . . . . . . . . . . . 5, 15 5211 . . . . . . . . . . . . . 5, 14, 15 5215 . . . . . . . . . . . . . 50 5220 . . . . . . . . . . . . . 50 5221 . . . . . . . . . . . . . 5, 17 5231 . . . . . . . . . . . . . 5, 16, 17 5241 . . . . . . . . . . . . . 5, 15 5251 . . . . . . . . . . . . . 5, 14, 15 5260EE HEM. . . . . . . 37, 41 5315 HEM. . . . . . . . . 37, 38 5341 . . . . . . . . . . . . . 50 5360 . . . . . . . . . . . . . 5, 21 5360 HEM. . . . . . . . . 37, 41 5361 HEM. . . . . . . . . 37, 41 5510 . . . . . . . . . . . . . 7 5511 . . . . . . . . . . . . . 7 5515 . . . . . . . . . . . . . 7 5531 . . . . . . . . . . . . . 7 5541 . . . . . . . . . . . . . 7 5551 . . . . . . . . . . . . . 7 5567 . . . . . . . . . . . . . 7 5570 . . . . . . . . . . . . . 7 5571 . . . . . . . . . . . . . 7 5575 . . . . . . . . . . . . . 7 5576 . . . . . . . . . . . . . 7 5601 . . . . . . . . . . . . . 5, 11, 22 5602 . . . . . . . . . . . . . 50 5610 . . . . . . . . . . . . . 5, 8, 10, 11, 18 5610 HEM. . . . . . . . . 37, 38 5611 . . . . . . . . . . . . . 5, 10, 11 5611 HEM. . . . . . . . . 37, 38 5612 . . . . . . . . . . . . . 50 5661 . . . . . . . . . . . . . 5, 18, 19 5770 . . . . . . . . . . . . . 21 5800 HEM. . . . . . . . . 37 5845 . . . . . . . . . . . . . 5, 16, 17 RAIL, SHOE and FILLET 6000P . . . . . . . . . . . . 5, 20 6001 . . . . . . . . . . . . . 5, 20 6002 . . . . . . . . . . . . . 5, 20 6005P1 . . . . . . . . . . . 5, 22, 35 6005 HEM. . . . . . . . . 37, 41 6006 . . . . . . . . . . . . . 9, 11, 13, 15, 17, 19, 22, 23 6007 . . . . . . . . . . . . . 9, 11, 13, 15, 17, 19, 22, 23 6010 . . . . . . . . . . . . . 5, 8, 9, 24, 34 6010 HEM. . . . . . . . . 37, 38, 39, 40 6015 . . . . . . . . . . . . . 8, 10, 16, 38 6016 . . . . . . . . . . . . . 8 6016 HEM. . . . . . . . . 38, 41 6019 HEM. . . . . . . . . 37, 41 6031 . . . . . . . . . . . . . 9 6032 . . . . . . . . . . . . . 9

ITEM

PAGE

6040 . . . . . . . . . . . . . 23 6042 . . . . . . . . . . . . . 23 6042 HEM. . . . . . . . . 37, 41 6045 . . . . . . . . . . . . . 9, 19, 23 6050 . . . . . . . . . . . . . 9, 19, 23 6106 HEM. . . . . . . . . 39, 40 6107 HEM. . . . . . . . . 39, 40 6110 . . . . . . . . . . . . . 5, 12, 13, 25 6115 . . . . . . . . . . . . . 12 6116 . . . . . . . . . . . . . 12 6206 HEM. . . . . . . . . 37, 38, 41 6207 HEM. . . . . . . . . 37, 38, 41 6208 HEM. . . . . . . . . 37, 41 6210 HEM. . . . . . . . . 37, 38 6210W. . . . . . . . . . . . 5, 10, 11, 16, 17, 24 6216W. . . . . . . . . . . . 10, 16 6244 HEM. . . . . . . . . 37, 41 6300 . . . . . . . . . . . . . 5, 20 6301 . . . . . . . . . . . . . 5, 20 6302 . . . . . . . . . . . . . 5, 20 6306 HEM. . . . . . . . . 41 6307 HEM. . . . . . . . . 41 6308 HEM. . . . . . . . . 41 6310 . . . . . . . . . . . . . 50 6344 HEM. . . . . . . . . 37, 41 6410 . . . . . . . . . . . . . 5, 23,25 6415 . . . . . . . . . . . . . 23 6416 . . . . . . . . . . . . . 23 6510 . . . . . . . . . . . . . 5, 18, 19, 25 6515 . . . . . . . . . . . . . 18 6516 . . . . . . . . . . . . . 18 6600 . . . . . . . . . . . . . 50 6610 . . . . . . . . . . . . . 5, 23, 25 6615 . . . . . . . . . . . . . 23 6616 . . . . . . . . . . . . . 23 6700P . . . . . . . . . . . . 5, 20 6700P1 . . . . . . . . . . . 5, 20 6715 . . . . . . . . . . . . . 14 6716 . . . . . . . . . . . . . 14 6719 . . . . . . . . . . . . . 5, 14, 15, 25, 35 6770P . . . . . . . . . . . . 5, 20 6810 . . . . . . . . . . . . . 5, 16, 17, 25 6815 . . . . . . . . . . . . . 16 6816 . . . . . . . . . . . . . 16 6910S HEM. . . . . . . . 37, 39 6915 . . . . . . . . . . . . . 39 6916 HEM. . . . . . . . . 39 FITTINGS 70XX . . . . . . . . . . . . . 24 70XX HEM . . . . . . . . 39 71XX . . . . . . . . . . . . . 25 72XXW . . . . . . . . . . . 24 74XX . . . . . . . . . . . . . 25 75XX . . . . . . . . . . . . . 25 76XX . . . . . . . . . . . . . 25 77XX . . . . . . . . . . . . . 25 78XX . . . . . . . . . . . . . 25 79XX HEM . . . . . . . . 39 7000 . . . . . . . . . . . . . 23 7005 . . . . . . . . . . . . . 23 7023 . . . . . . . . . . . . . 23 7024 . . . . . . . . . . . . . 23 7025 . . . . . . . . . . . . . 23 STARTING STEPS . . 8010 . . . . . . . . . . . . . 26 8010 HEM. . . . . . . . . 42 8011 . . . . . . . . . . . . . 27 8015 . . . . . . . . . . . . . 26 8015 HEM. . . . . . . . . 42 8016 . . . . . . . . . . . . . 26 8020 . . . . . . . . . . . . . 26 8025 . . . . . . . . . . . . . 26 8030 . . . . . . . . . . . . . 26 8040 . . . . . . . . . . . . . 26 8041 . . . . . . . . . . . . . 26 8050 . . . . . . . . . . . . . 26 8060 . . . . . . . . . . . . . 26 8061 . . . . . . . . . . . . . 26 8065 . . . . . . . . . . . . . 26 8630 . . . . . . . . . . . . . 26 8650 . . . . . . . . . . . . . 26 8911 . . . . . . . . . . . . . 27 8911 HEM. . . . . . . . . 42

ITEM

PAGE

TREADS and RISERS 6974 . . . . . . . . . . . . . 27 6974 HEM. . . . . . . . . 41 6975 . . . . . . . . . . . . . 27 6975 HEM. . . . . . . . . 41 8070 . . . . . . . . . . . . . 27 8070S HEM. . . . . . . . 41 8071 . . . . . . . . . . . . . 27 8071 HEM. . . . . . . . . 41 8072 . . . . . . . . . . . . . 27 8072 HEM. . . . . . . . . 41 8075 . . . . . . . . . . . . . 27 8075S HEM. . . . . . . . 41 8076 . . . . . . . . . . . . . 27 8076 HEM. . . . . . . . . 41 8080 . . . . . . . . . . . . . 27 8080 HEM. . . . . . . . . 41 8080-13 . . . . . . . . . . . 27 8080-13 HEM . . . . . . 41 8080 MR . . . . . . . . . . 27 8081 . . . . . . . . . . . . . 27 8085 . . . . . . . . . . . . . 27 8085 HEM. . . . . . . . . 41 8090 . . . . . . . . . . . . . 27 8090 HEM. . . . . . . . . 41 8095 . . . . . . . . . . . . . 27 8095 HEM. . . . . . . . . 41 8270 . . . . . . . . . . . . . 27 8270S HEM. . . . . . . . 41 8370 . . . . . . . . . . . . . 27 8370S HEM. . . . . . . . 41 8470 . . . . . . . . . . . . . 27 8470S HEM. . . . . . . . 41 8590 . . . . . . . . . . . . . 27 8590 HEM. . . . . . . . . 41 8971 . . . . . . . . . . . . . 27 8972 . . . . . . . . . . . . . 27 8976 . . . . . . . . . . . . . 27 SPINDLES and TOPS AD610. . . . . . . . . . . . 43 BT305 . . . . . . . . . . . . 43 BT406 . . . . . . . . . . . . 43 BT507 . . . . . . . . . . . . 43 BT608 . . . . . . . . . . . . 43 H-232 . . . . . . . . . . . . 43 H-236 . . . . . . . . . . . . 43 H-248 . . . . . . . . . . . . 43 H-332 . . . . . . . . . . . . 43 H-336 . . . . . . . . . . . . 43 H-348 . . . . . . . . . . . . 43 KT303 . . . . . . . . . . . . 43 KT403 . . . . . . . . . . . . 43 RT305 . . . . . . . . . . . . 43 RT406 . . . . . . . . . . . . 43 RT608 . . . . . . . . . . . . 43 ST304 . . . . . . . . . . . . 43 ST405 . . . . . . . . . . . . 43 T-207. . . . . . . . . . . . . 43 T-209. . . . . . . . . . . . . 43 T-212. . . . . . . . . . . . . 43 T-218. . . . . . . . . . . . . 43 T-224. . . . . . . . . . . . . 43 T-228. . . . . . . . . . . . . 43 T-318. . . . . . . . . . . . . 43 T-324. . . . . . . . . . . . . 43 T-328. . . . . . . . . . . . . 43 T-332. . . . . . . . . . . . . 43 T-336. . . . . . . . . . . . . 43 UT306. . . . . . . . . . . . 43 UT408. . . . . . . . . . . . 43 UT510. . . . . . . . . . . . 43 FORGED BALUSTRADE PROGRAM 2XXX . . . . . . . . . . . . 30, 31, 32, 33

51

Custom Profiles and Premium Species NEW CNC/CAM System Allows Fast, Cost-Effective, and Precise Wood Turnings of YOUR Custom Profiles.

Any Specie. Any Quantity. Any Profile.

• AutoCAD drawings can be supplied by you or created by Coffman from existing parts, photographs, or your unique concept.

*Any Specie suitable for Stair Part production. Contact Coffman for more information on individual specie requests.

• Quotes on any specie, any profile, any quantity.

*

• Raw material in stock in many species for immediate production. See partial list below.

Alder

Mahogany

Walnut

Lyptus

White Oak

Hickory

Birch

Ash

Southern Yellow Pine

Brazilian Cherry

Pictured above is Coffman’s state-of-the-art Locatelli CNC turning lathe.

®

Coffman Stairs LLC 1000 Industrial Road Marion,Virginia 24354 Phone: 276-783-7251 Fax: 276-783-6937 www.coffmanstairs.com [email protected] A Company of VISADOR Holding Corporation.

C-173F (07-08) © 2008 Coffman Stairs LLC