Cnt-0009987-02.pdf
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Cnt-0009987-02.pdf as PDF for free.
More details
- Words: 860
- Pages: 9
Special Vehicle Series : 05
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Articulated Ladder Truck Assembly Instructions
View of completed model * This model was designed for Papercraft and may differ from the original in some respects.
Tools
Scissors Ruler, set square Glue (Wood glue or craft glue recommend) Exhausted ballpoint pen (out of ink) Toothpicks (for use in applying glue) Tweezers (useful for handling small parts) Pencil
Assembly tip Write the number of each part on the reverse side of the part in pencil upon cutting it out, to be sure you can tell which part is which later. Before gluing, crease the paper along mountain and valley fold lines. Trace along the folds with a ruler and an exhausted ballpoint pen (out of ink) to get a sharper fold. Make sure rounded sections are nice and stiff.
Key to symbols
Pattern
Assembly instructions
Dotted line
Mountain fold Fold so that the printed pattern faces outside.
Dashed and dotted line
Valley fold Fold so that the printed pattern faces inside.
Solid line
Solid blue line
Diagonal grey lines
Cut parts out along this line. Cut a notch along this line. Cut these areas out.
The dots show where to glue the pieces together. Glue the pieces together as shown in the following examples. Some parts must be glued together along the cut surfaces.
Red dot Glue parts with the same number together. (Numbers are not printed on very small parts.)
Green dot Glue areas within the same part together.
Blue dot Glue to the reverse side of the specified part.
Glue, scissors and other tools may be dangerous to young children so be sure to keep them out of the reach of young children.
Assembly Instructions: Nine A4 sheets (No. 1 to No. 9) Build this model with careful reference to the Assembly Instructions.
Red arrow Blue arrow
Glue Insert (without gluing)
Light blue
Glue tab
Light grey
Reverse side of paper Movable part This denotes a part that must be able to move after the model is completed.Be sure to crease these parts sufficiently.
Articulated Ladder Truck
Assembly Instructions
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Assemble the cab. Glue flaps a, b, c, and d in order.
Attach parts 5 & 6 to part 4, and parts 8 & 9 to part 7, and assemble.
After gluing parts 11 & 12 to the respective openings, assemble by folding over left, right, and front sections.
Do not fold these sections.
Do not fold these sections.
Articulated Ladder Truck
Assembly Instructions
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Assemble part 13, glue to , and fold sections a, b, and c in order. Glue flaps a, b, c, and d in order.
Glue the reverse surfaces together.
Insert part 18 through from the reverse of part 17 and glue in place.
Glue the wings of part 27 in place before assembling. Glue part 23 to the reverse of part 24 and assemble. Glue a portion of part 26.
Articulated Ladder Truck
Assembly Instructions
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Insert part 40 into , sandwich between parts 31 and 32, then glue with part 39, confirming the width as you fix the parts in place.
Insert part 33 into part 34; do not glue.
Apply glue to fastener flap section of insert into part 38 and fix in place.
,
After gluing part 35 to part 41, insert into opening in and glue to part 36.
Side view Follow illustrations carefully when gluing the reverse side.
Glue reverse sides of two forehand and inner units together.
This section is glued in the next panel.
Articulated Ladder Truck
Assembly Instructions
Assemble parts and insert in order. Don't forget to cut the slit and hole for the telescopic stopper.
With the blue lines to right and left, insert the stopper with the hole facing down.
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Articulated Ladder Truck
Assembly Instructions
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Assemble part 50 with the patterned surface to the inside, and insert into part 49.
Glue parts with no glue tabs to the areas cut out of the paper parts.
Reinforcement for moving parts; glue to inner surface.
Extend the moving telescopic section and apply glue.
Glue flaps a and b in order. Insert part 47 and glue to base.
Articulated Ladder Truck
Assemble front tires.
Assembly Instructions
Assemble outer rear tires.
Attach the tires according to the diagram below.
Front
Rear
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Assemble inner rear tires.
Articulated Ladder Truck
Assembly Instructions
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Align the holes and glue carefully, checking to ensure left and right sides do not warp.
Glue to the underside. Don't forget to glue opposite piece too.
Articulated Ladder Truck
Assembly Instructions
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Insert the ladder assembly into the hole but do not glue. The ladder should revolve freely.
Refer to the finished photo and attach small parts.
Artic
Spec
ulat
ial V
ehic le Se
ed L
adde
ries
r Tru
Finished! Last, assemble the nameplate and display it together with your model.
ck
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Articulated Ladder Truck Assembly Instructions
View of completed model * This model was designed for Papercraft and may differ from the original in some respects.
Tools
Scissors Ruler, set square Glue (Wood glue or craft glue recommend) Exhausted ballpoint pen (out of ink) Toothpicks (for use in applying glue) Tweezers (useful for handling small parts) Pencil
Assembly tip Write the number of each part on the reverse side of the part in pencil upon cutting it out, to be sure you can tell which part is which later. Before gluing, crease the paper along mountain and valley fold lines. Trace along the folds with a ruler and an exhausted ballpoint pen (out of ink) to get a sharper fold. Make sure rounded sections are nice and stiff.
Key to symbols
Pattern
Assembly instructions
Dotted line
Mountain fold Fold so that the printed pattern faces outside.
Dashed and dotted line
Valley fold Fold so that the printed pattern faces inside.
Solid line
Solid blue line
Diagonal grey lines
Cut parts out along this line. Cut a notch along this line. Cut these areas out.
The dots show where to glue the pieces together. Glue the pieces together as shown in the following examples. Some parts must be glued together along the cut surfaces.
Red dot Glue parts with the same number together. (Numbers are not printed on very small parts.)
Green dot Glue areas within the same part together.
Blue dot Glue to the reverse side of the specified part.
Glue, scissors and other tools may be dangerous to young children so be sure to keep them out of the reach of young children.
Assembly Instructions: Nine A4 sheets (No. 1 to No. 9) Build this model with careful reference to the Assembly Instructions.
Red arrow Blue arrow
Glue Insert (without gluing)
Light blue
Glue tab
Light grey
Reverse side of paper Movable part This denotes a part that must be able to move after the model is completed.Be sure to crease these parts sufficiently.
Articulated Ladder Truck
Assembly Instructions
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Assemble the cab. Glue flaps a, b, c, and d in order.
Attach parts 5 & 6 to part 4, and parts 8 & 9 to part 7, and assemble.
After gluing parts 11 & 12 to the respective openings, assemble by folding over left, right, and front sections.
Do not fold these sections.
Do not fold these sections.
Articulated Ladder Truck
Assembly Instructions
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Assemble part 13, glue to , and fold sections a, b, and c in order. Glue flaps a, b, c, and d in order.
Glue the reverse surfaces together.
Insert part 18 through from the reverse of part 17 and glue in place.
Glue the wings of part 27 in place before assembling. Glue part 23 to the reverse of part 24 and assemble. Glue a portion of part 26.
Articulated Ladder Truck
Assembly Instructions
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Insert part 40 into , sandwich between parts 31 and 32, then glue with part 39, confirming the width as you fix the parts in place.
Insert part 33 into part 34; do not glue.
Apply glue to fastener flap section of insert into part 38 and fix in place.
,
After gluing part 35 to part 41, insert into opening in and glue to part 36.
Side view Follow illustrations carefully when gluing the reverse side.
Glue reverse sides of two forehand and inner units together.
This section is glued in the next panel.
Articulated Ladder Truck
Assembly Instructions
Assemble parts and insert in order. Don't forget to cut the slit and hole for the telescopic stopper.
With the blue lines to right and left, insert the stopper with the hole facing down.
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Articulated Ladder Truck
Assembly Instructions
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Assemble part 50 with the patterned surface to the inside, and insert into part 49.
Glue parts with no glue tabs to the areas cut out of the paper parts.
Reinforcement for moving parts; glue to inner surface.
Extend the moving telescopic section and apply glue.
Glue flaps a and b in order. Insert part 47 and glue to base.
Articulated Ladder Truck
Assemble front tires.
Assembly Instructions
Assemble outer rear tires.
Attach the tires according to the diagram below.
Front
Rear
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Assemble inner rear tires.
Articulated Ladder Truck
Assembly Instructions
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Align the holes and glue carefully, checking to ensure left and right sides do not warp.
Glue to the underside. Don't forget to glue opposite piece too.
Articulated Ladder Truck
Assembly Instructions
© Canon Inc. © Keisuke Saka+Kohei Masukawa
Insert the ladder assembly into the hole but do not glue. The ladder should revolve freely.
Refer to the finished photo and attach small parts.
Artic
Spec
ulat
ial V
ehic le Se
ed L
adde
ries
r Tru
Finished! Last, assemble the nameplate and display it together with your model.
ck
More Documents from "Cadal 'eka' Mamen"
Kamen+rider+w+double+-+pdf+by+akaripap.pdf
June 2020 4
Kamen+rider+w+double+-+pdf+by+akaripap.pdf
June 2020 9
Cnt-0009987-02.pdf
June 2020 4
Deberes Del 20 Al 24 De Octubre
November 2019 18
565.pdf
May 2020 60